Hi bodhi, it's booted now after I switched to an oooooooold usb drive (I was using a sandisk cruzer blade on my pogoplug), phew~~~ I did have the idea to try another drive but would take it as the last way coz I've been using the sandisk cruzer blade on both E02 and dockstar for years with no issues. Anyway, it's working now. Thank you sooooooo much for your help!!!!by xddy - Debian
Hi bodhi, no it doesn't. The box stuck somewhere and cannot get ip, front led stays green, however the ethernet blinks orange. Thanks. BTW, is my understanding correct? It looks like my Uboot works fine, so for kernel 4.4.0 with latest uboot, basically I should do the following: On my ubuntu desktop--- 1. Format a new USB drive with a single Ext3 partition, and label it rootfs. 2.by xddy - Debian
Thank you for the quick response! Actually, I did not do the steps in "http://forum.doozan.com/read.php?2,9522", can I do it now on my ubuntu? By following you instruction: the e2fsck did not report any error, the the ls outputs are: drwxr-xr-x 21 root root 4096 Feb 16 2015 .. -rw-r--r-- 1 root root 140949 Jan 25 2016 config-4.4.0-kirkwood-tld-1 -rwxr-xr-x 1 rootby xddy - Debian
Hi bodhi, I got the similar problem, unlike feas's story, I cannot boot with any kernels after upgrading to the latest uboot. Can you help me take a look? Thanks in advance! Long story in short: I was running Jeff's build for years till I decided to upgrade my pogoplug_e02 to the latest version. So, I took the following steps: upgraded to 4.4.0 by following "Updated 20 Feb 2016&by xddy - Debian
No, I still cannot using putty to do ssh connection to the dockstar. I also tried to plug the flash drive in, it can be partially recognized, but not mounted like [ 2531.240000] usb 1-1.3: new high speed USB device using ehci_marvell and address 3 [ 2531.340000] usb 1-1.3: configuration #1 chosen from 1 choice [ 2531.350000] scsi0 : SCSI emulation for USB Mass Storage devices [ 2536.38by xddy - Debian
Updates: I tried not to interrupt the booting in the last step, then it seems I got something like [ 1.940000] Linux telephony interface: v1.00 [ 1.950000] md: linear personality registered for level -1 [ 1.950000] md: raid0 personality registered for level 0 [ 1.960000] md: raid1 personality registered for level 1 [ 2.130000] raid6: int32x1 97 MB/s [ 2.300000] raiby xddy - Debian
It seems I am in nowhere now :( I want to make it clear to see if anyone could help me. I was able to run plugapp with no problem, then I decided to try Debian on my dockstar. Reflashing went smooth, but after that it would not reboot, either with usb or not, the orange light blinks forever, however, ping works and I can see the dockstar on my router. After I got the ttl cable yesterday,by xddy - Debian
Thanks a lot! But by following some instructions that worked for other people, I got several weird issues. So, I'm trying to make one question clear. As long as I can watch the booting process through the ttl cable (no matter it fails or not), the Dockstar is not "really" bricked, then I should be able to find a way to re-flash it back without JTAG. And the "real brick&qby xddy - Debian
I was trying to download it from http://jeff.doozan.com/debian/uboot/uboot-original-mtd0.kwb but the link is broken. Anyone can help me find this file? Thanks!by xddy - uBoot
Thank you very much for your help. However, I figured out that the problem comes from "Pogoplug install" as mentioned in http://forum.doozan.com/read.php?2,243,264#msg-264 I tried to download the file from http://jeff.doozan.com/debian/uboot/uboot-original-mtd0.kwb But the link is not working any longer, searched online, still no luck..:( Can you help me find the uboot-oby xddy - Debian
I partially bricked my dockstar couple days ago. Then I got a CA-42 Cable, but when I tried to follow the instruction: http://wejp.k.vu/dockstar/dockstar_repair_with_serial_cable , I could not download the kernel image from plugapps.com, it seems that the website is down except the forum. Anyone can help me find the file? I appreciate your help!by xddy - Debian
neutronscott Wrote: ------------------------------------------------------- > Things should not be modified without a serial > console attached, in my opinion. You can monkey > with it all you'd like, attaching a serial console > would give you definite answers. That's my > suggestion anyway. It'll take some time to acquire > parts, but once you can actualby xddy - Debian
@rat-netbook Thanks for your reply, however, without usb, same thing happens, it means, orange blinks forever and the dockstar would not boot. Anyway, it could obtain ip from router, and ping works. Any idea about this situation? Thanks again.by xddy - Debian
Newbie here...... My dockstar was running Plugapp without any problems. I tried to install Debian, but got problems today. I followed shyd's instruction http://dev.shyd.de/2011/01/seagate-dockstar-debian-squeeze/ Installation went smooth, but after first reboot, things changed............. Green blinking......then......amber blinking forever...... The Dockstar can be foundby xddy - Debian