Hi Bodhi, For my testing, I tested with a SSD and it was correctly detected. Now, I put a 3.5" HDD, it's not. Do you think it's a power issue like in this thread: https://forum.doozan.com/read.php?2,96444,96459 ? How can I find the correct GPIO to enable sata power?by empgg3 - uBoot
> Please rename this log to use extension .txt and > re-upload (I have problem reading it). I edited my previous post.by empgg3 - uBoot
Hi Bodhi, Sorry, I missed these commands. I tested again and only disks on slots 3 and 4 work. I also succeeded to boot with mainline debian kernel and also only slots 3 and 4 work. But there is some errors when I hot plug disk on slot 2, see full logs attached.by empgg3 - uBoot
> Try kwboot with 2022.10-rc3-tld-0.2 and the > mainline Debian kernel. See if you can see and use > all 4 disks Debian. Hi Bodhi, I was not able to detect any drive with U-Boot 2022.10-rc3-tld-0.2 and I was not able to boot to debian, see logs below. U-Boot 2022.10-rc3-tld-0.2 (Aug 24 2022 - 16:52:00 -0700) Lenovo-ix4-200d SoC: Kirkwood 88F6281_A1 DRAM: 512 MiB Coby empgg3 - uBoot
> Can you share with me a copy of your complied > u-boot and I can give feedback on it too? > > I see from the bugzilla report that it could be an > issue with certain disks. Maybe my 6Tb are a bit > much for this old Nas although all 4 are detected > and usable with stock u-boot and bohdis kernel. > It's just that stock u-boot does not allow booting > froby empgg3 - uBoot
bodhi Wrote: ------------------------------------------------------- > Did you see all 4 drives detected? Or just 2 > drives? Hi Bodhi, I can't say right now, I didn't look any further since I boot from USB. I'll try again tomorrow or the day after and I'll send you some logs.by empgg3 - uBoot
Thanks Bodhi I'll check your config After the weekend :) Have a look to the diff: https://github.com/u-boot/u-boot/compare/v2022.07...ggirou:u-boot:v2022.07-ix4-200d I set the registers for gpio with the same values from my stock u-boot.by empgg3 - uBoot
Hi, I'm also working on this box, check my github: https://github.com/ggirou/ix4-200d/ https://github.com/ggirou/u-boot/tree/v2022.07-ix4-200d I made a specific u-boot for ix4-200d, sata drive is detected but I didn't try to boot from it. After that, Debian kernel doesn't detect all drives but Bodhi's one does very well. I'm trying to find why.by empgg3 - uBoot