I will try to look into your head :-) file config ? .[2J.[1;1H#!/bin/sh.[K.[1;1H.[2;1H.[K.[1;1H.[3;1H# use 'dhcp' to do dhcp in barebox and in kernel.[K.[1;1H.[4;1H# use 'none' if you want to skip kernel ip autoconfiguration.[K.[1;1H.[5;1Hip=none.[K.[1;1H.[6;1H.[K.[1;1H.[7;1H# or set your networking parameters here.[K.[1;1H.[8;1Heth0.ethaddr=00:0A:0B:0C:0D:0E.[K.[1;1H.by AdamOSA - uBoot
Barebox-C2K >/ ls /env/ . .. config bin Barebox-C2K >/by AdamOSA - uBoot
Barebox-C2K >/ printenv locals: PATH=/env/bin ip=none kernel_loc=SPI rootfs_loc=SPI kernelimage_type=uimage SPI_parts=384k(barebox),64k(bareboxenv),3072k(kernel),4480k(rootfs),64k(vendor),64k(RedBoot-Config),64k(FIS-Directory) autoboot_timeout=3 usb3_internal_clk=no bootargs=console=ttyS0,115200n8 initrd=0x5000000,8M root=/dev/md0 rw syno_hw_version=DS414jv10 ihd_num=4 netif_num=by AdamOSA - uBoot
Thank you so much for taking the time to respond I took a small step forward today . When loading the bootloader gives you the option to abort before loading ( CTRL + C key combination ) . I took advantage of this , ran the dhcp command and got an IP from my network range . Unfortunately PING to the network or vice versa gives no result . Changed the entry after printenv command . But I stillby AdamOSA - uBoot
My Synology DS414J file server crashed , there is no access from the network side , it does not want to initiate operation , after turning on the power LED blinks all the time . I hooked up to the serial the result below uloader 2011.06.0 (Sep 11 2014 - 13:33:44) Board: Mindspeed C2000 c2k_spi_probe DDR Training: ....................................................................by AdamOSA - uBoot