Hi, just after writing the post I thought whether not to send a print. NSA325> printenv baudrate=115200 bootcmd=usb reset; run usb_bootcmd; usb stop; reset bootdelay=3 console=console=ttyS0,115200 ethact=egiga0 ethaddr=5C:F4:AB:48:F2:BC load_uimage=ext2load usb 0:1 0x800000 /boot/uImage load_uinitrd=ext2load usb 0:1 0x2100000 /boot/uInitrd mtdids=nand0=orion_nand mtdparts=mtdpartsby glw125 - uBoot
Hi now debian boots from usb only as silent usb in the NAS is an error. And does not start open wrt ZyXEL NSA325 2-Bay Power Media Server SoC: Kirkwood 88F6282_A1 DRAM: 512 MiB NAND: 128 MiB MMC: Loading Environment from NAND... OK In: serial Out: serial Err: serial Net: egiga0 MV88E1318 PHY initialized on egiga0 Hit any key to stop autoboot: 0 resetting USB... USBby glw125 - uBoot
Thank you bodhi for your help :) Starting the system, you are very kind. I have a question, is it possible to Open WRT to remove NSA325v2 and restore the factory system on the internal memory and Debian on the external? Regardsby glw125 - uBoot
Hello It starts only once, after turning the NAS325 back on, the procedure should be repeated, because it starts Open WRT U-Boot 2020.04 (Oct 14 2022 - 22:44:41 +0000) ZyXEL NSA325 2-Bay Power Media Server SoC: Kirkwood 88F6282_A1 DRAM: 512 MiB NAND: 128 MiB MMC: Loading Environment from NAND... OK In: serial Out: serial Err: serial Net: egiga0 MV88E1318 PHY initiby glw125 - uBoot
Hello problem is in ## Error: "setenv" not defined again I wanted to do NSA325> setenv usb_set_bootargs 'setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial' NSA325> setenv load_uimage 'ext2load usb 0:1 0x800000 /boot/uImage' Unknown command 'setenv' - try 'help' NSA325> setenv load_uinitby glw125 - uBoot
Hello, I did as you wrote. Neither debian nor Open WRT boots on first boot. next time debian is started in console. And now debian won't start, every time open wrt starts even if i made a new usb.by glw125 - uBoot
I have Open WRT luci 22.03 snapshot. https://openwrt.org/toh/zyxel/nsa325 root@clever:/media/root/rootfs/boot# cp -a zImage-5.13.6-kirkwood-tld-1 zImage.fdt root@clever:/media/root/rootfs/boot# cat dts/kirkwood-nsa325.dtb >> zImage.fdt root@clever:/media/root/rootfs/boot# mv uImage uImage.orig root@clever:/media/root/rootfs/boot# mkimage -A arm -O linux -T kernel -C none -a 0x0by glw125 - uBoot