Hello, thanks for your answers and your help. kwboot, request to reboot the device, so it will be with the new mtd. Can I reboot by netconsole?by zanco83 - uBoot
-bash-3.2# cat /etc/fw_env.config # Configuration file for fw_(printenv/saveenv) utility. # Up to two entries are valid, in this case the redundant # environment sector is assumed present. # Notice, that the "Number of sectors" is ignored on NOR. # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd0 0xc0000 0x20000 0x20000 I'm tryinby zanco83 - uBoot
I performed the update considering that the blocks where not the one involved in mtd0, but after erasing and writing correctly, fw_setenv seems not to work by ssh console. -bash-3.2# fw_setenv ipaddr 192.168.178.170 Unlocking flash... Done Erasing old environment... Done Writing environment to /dev/mtd0... Done Locking ... Done -bash-3.2# fw_printenv arcNumber=2097 bootcmd_exec=ruby zanco83 - uBoot
Hello, just a quick review as said in the very detailed instructions for uboot installation. Scanning device for bad blocks Bad eraseblock 785 at 0x06220000 Bad eraseblock 851 at 0x06a60000 Bad eraseblock 864 at 0x06c00000 Bad eraseblock 866 at 0x06c40000 Bad eraseblock 944 at 0x07600000 Bad eraseblock 946 at 0x07640000 Bad eraseblock 947 at 0x07660000 Bad eraseblock 968 at 0x07900000by zanco83 - uBoot