bodhi Wrote: ------------------------------------------------------- > uLumia, > > Check that the power cord is away from the 3 > serial wires. > > Try vary the timing when you run kwboot and power > up (or reboot) the box. > > - Run kwboot, and immediately apply power (cold > start). > - Run kwboot and reboot the box. > > - Apply power andby uLumia - uBoot
Quotepicocom v3.1 port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : no hangup is : no nolock is : no send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : omap is : emap is : cby uLumia - uBoot
uLumia Wrote: ------------------------------------------------------- > Quotekwboot -t -B 115200 /dev/ttyUSB0 -b > uboot.2017.07-tld-1.t5325.mtd0.kwb -p > Same as in > thread > about modern U-Boot for t5325 > Also if execute kwboot while in stock U-Boot there > is some data, and i can press Enter and U-Boot wil > say its unknown command Data is Quote�"by uLumia - uBoot
Quotekwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.t5325.mtd0.kwb -p Same as in thread about modern U-Boot for t5325 Also if execute kwboot while in stock U-Boot there is some data, and i can press Enter and U-Boot wil say its unknown commandby uLumia - uBoot
Quotemd ff00003c in stock U-Boot on HP t5325 returns all zeros and kwboot stuck at QuoteSending boot message. Please reboot the target....Nothing happens on box(not even stock U-Boot starts) I can successfully interact with default U-Boot and my TTL>USB is Prolific PL2303by uLumia - uBoot