Do you guys think I should update my Uboot? This is what I downloaded to install Uboot: Quotewget http://jeff.doozan.com/debian/goflex/v0.6/uInitrd wget http://jeff.doozan.com/debian/goflex/v0.6/ubit_startby Snerler - uBoot
Figured out how to use "fw_printenv." I had to put this line in my /etc/fw_env.config: /dev/mtd0 0xa0000 0x20000 0x20000 This is the what I get by running fw_printenv: baudrate=115200 loads_echo=0 ipaddr=169.254.254.253 serverip=169.254.254.254 rootpath=/mnt/ARM_FS/ netmask=255.255.0.0 run_diag=yes CASset=min MALLOC_len=1 ethprime=egiga0by Snerler - uBoot
Thanks for your help so far. I ran 'fw_printenv' but it looks like the right package was not installed with Arch Linux: "-bash: fw_printenv: command not found" I found these steps on the forum: Quotecd /tmp wget http://jeff.doozan.com/debian/uboot/fw_printenv wget http://jeff.doozan.com/debian/uboot/fw_env.config chmod 755 fw_printenv chmod 644 fw_env.config mv fw_pby Snerler - uBoot
Nothing comes up when I do that command and reboot the Goflex. What could be the cause? Firewall issues?by Snerler - uBoot
Another thing I wanted to add is that I tried using the netconsole instructions from the Arc Linux Arm website: http://archlinuxarm.org/platforms/armv5/seagate-goflex-home But nothing comes up on my other Ubuntu computer at all when I restart the Goflex. Is there something else I should try besides those instructions?by Snerler - uBoot
I have a Goflex Home set up with Arch Linux booting from the SATA port. I wanted to add additional storage so I got a 3TB external USB drive. But the Goflex does not boot with the USB drive plugged in. It boots with smaller USB drives, but not this one. It seems like the Goflex is trying to boot from the USB first, and fails because the drive is >2TB. Is it possible to change the Uboot parby Snerler - uBoot