Hi Bodhi, Haven't had much time to work on this as other work was too demanding of my time. I'm having an issue and I want to make sure i''ve understood your immediate directive. For clarification, you want me to match ALL your environment variables with yours, correct? That said, I'm having an issue allready with some, I set them with no errors but they don't savby Looker - uBoot
Hello Bodhi, Thank you for your help so far, I have oe immediate question regarding the "ethaddr=", does this need to be the mac address off the bottom of the device? Thanksby Looker - uBoot
Thanks,but that's way over my head. Hardware I have no issue with but code I'm a newbie. Any chance you can walk me through it. Pogo's MAC address doesn't show up in my router anymore as having an ip either. Thanksby Looker - uBoot
Thanks Bodhi for the fast response! Following your advice I received the following after typing " printenv" : u-boot>> printenv baudrate=115200 bootargs=root=/dev/nfs nfsroot=: ip=::::::off bootcmd=bootp; setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm bootdelay=5 ethact=egiga0 ethaby Looker - uBoot
Hi, I messed up my pogoplug E02 while installing Archlinux and updationg the Kirkwood files somewhere along the line. No LED lights on fornt panel but I did connect an Rs232/usb cable to the jtag connector on the box and was able to get the following: U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 Miby Looker - uBoot