dear joerg, the image of connexion to pogo is missing. can you attached again here?by youxiaojie - uBoot
hello, I got a Qizhitong m501 v2, the uboot is customed, uboot env: bootdelay=5 baudrate=9600 loads_echo=0 ipaddr=10.4.50.165 serverip=10.4.50.5 rootpath=/mnt/ARM_FS/ netmask=255.255.255.0 run_diag=yes console=console=ttyS0,9600 CASset=min MALLOC_len=1 ethprime=egiga0 bootargs_root=mem=512M root=/dev/ram bootargs_end=:::DB88FXX81:eth0:none image_name=uImage bootcmd1=ide reset; eby youxiaojie - uBoot
every teachers,I got a new Kirkwood devices a soft router.I hope to port your new and advanced uboot to this device what part I should know and modify ?and what is the debrick method if the kwboot doesn't work?by youxiaojie - uBoot
the name? I did not find any files with this name.the man is also say so.but I don't understand what name it referred to? by the way should you be willing to set an apt source server to up kernel by apt?by youxiaojie - Debian
do you see the uboot run?in my test the SPL cannot load u-boot.img from ext4.how about yours.I do this sata boot successfully. maybe I can help you.by youxiaojie - Debian
mkimage -A arm -O linux -T kernel -C none -a 0x60008000 -e 0x60008000 -n linux-3.12.13-oxnas-tld-5 -d /boot/vmlinuz-3.12.13-oxnas-tld-5 /boot/uImage mkimage -A arm -O linux -T ramdisk -C gzip -a 0x60000000 -n initramfs-3.12.13-oxnas-tld-5 -d /boot/initrd.img-3.12.13-oxnas-tld-5 /boot/uInitrd in this two cmd,wht is the function of -n initramfs-3.12.13-oxnas-tld-5, -n linux-3.12.13-oxnas-by youxiaojie - Debian
uboot.2013.10-tld-5.ox820.environment bootdelay=10 ethaddr=52:3b:20:9c:11:51 ethact=mii0 ipaddr=192.168.0.222 #pogo’s ip serverip=192.168.0.220 # ip of pc running nc or Hercules SETUP utility if_netconsole=ping $serverip start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; preboot_nc=run if_netconsole sby youxiaojie - uBoot
I summed up the old post about sata boot for pogoplug pro and fixed some broken links Just for reference to others, I made a very detailed summary. Please revise my comment are there right in technical aspect. (?? if I have doubt - I will revise based on your comment) Synopsys: My device Pogo Plug P24 - V3 (nonpci) - oxnas 820 I have serial connection, I Screw up UBoot in NAND - Theby youxiaojie - Debian
thanks. reserver this filesby youxiaojie - uBoot
the direct boot from hd is special method even if the uboot on nand is damaged.by youxiaojie - uBoot
to tell the truth,this is the easiest way followed by other expert just to dd some files bootrom,spl,uboot,dtb, uimage to harddisk. in that method, there is no newer kernel, no newer uboot, they gave up. in this test, it shows me the hardware and the thought is correct. I will convert to your newer version if possible.it is you that still upgrade kernel/uboot to support new feature. thanks. andby youxiaojie - uBoot
IDE device 0: Model: ST3250318AS Firm: CC38 Ser#: 9VMECCJ6 Type: Hard Disk Supports 48-bit addressing Capacity: 238475.1 MB = 232.8 GB (488397168 x 512) ... is now current device IDE read: device 0 block # 1290, count 8192 ... 8192 blocks read: OK IDE read: device 0 block # 16418, count 256 ... 256 blocks read: OK ## Booting kernel from Legacy Imaby youxiaojie - uBoot
OX820 # help ? - alias for 'help' askenv - get environment variables from stdin base - print or set address offset bdinfo - print Board Info structure boot - boot default, i.e., run 'bootcmd' bootd - boot default, i.e., run 'bootcmd' bootelf - Boot from an ELF image in memory bootm - boot application image from memory bootp - boot imageby youxiaojie - uBoot
U-Boot SPL 2013.10 (Jan 03 2014 - 21:30:38) Boot device: SATA Attempting to set PLLA to 800 MHz ... plla_ctrl0 : 0000030a plla_ctrl1 : 00400000 plla_ctrl2 : 007f0068 plla_ctrl3 : 00000193 PLLA Set Bus 0: OK Device 0: Model: ST3250318AS Firm: CC38 Ser#: 9VMECCJ6 Type: Hard Disk Supports 48-bit addressing Capacity: 238475.1 MB = 232.by youxiaojie - uBoot
thank you. the mod to 256M is feasible .the post shows how to boot from harddisk purely. https://archlinuxarm.org/forum/viewtopic.php?f=55&t=2146 ,but unfortunately, the file link is unavailable. damn archlinux. in this post, it mentioned 256M users here.by youxiaojie - uBoot
thank you.what is spl standard for?s for ? p for and l for?by youxiaojie - uBoot
sure , the chip is h5ps2g63emr-s6c the hardware support this mod ,what I need is to modify source code.I will correct more images later.by youxiaojie - uBoot
very good!!!!!!!!!!!!!by youxiaojie - uBoot
I have enlarged mem to 256MB, the original u boot only recognize 128M does your uboot support all 256M?by youxiaojie - uBoot
what is the meanings of spl?in this version the u boot partition need 2M?does it use second boot technology?can I use nanddump to backup original uboot? thanksby youxiaojie - uBoot
yes under your instrction I try to solve it myself first, but because of leakage of embedded linux / uboot, I have to ask your help. thank you. anyway I learn a lot.I will try my effort.by youxiaojie - Debian
the question is I could not boot into linux , however the nanddump and nandwrite should run in linux.therefore I am finding a correct configure to enter linux in usb first and than update uboot 2016.05 and flash default env.and I saw default env is for pogo e2,mine is pogo v4. is it matter? I also try to boot from serial. does not succeed any way.:) so i decide to configure a env for ubootby youxiaojie - Debian
ok try again. Pogov4> printenv dtb_file dtb_file=/boot/dts/kirkwood-pogoplug_v4.dtb Pogov4> boot (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found 3154896 bytes read in 483 ms (6.2 MiB/s) 7179935 bytes read in 749 ms (9.1 MiB/s) ## Booting kernel from Legacy Image atby youxiaojie - Debian
confirm. the nandwrite and nanddump donot work under openwrt CC. So the openwrt 15.05 is not the best os for recovery but pretty good for general usage.I want to try lede next step. is there the way to use tftp load firmware to memory and uboot command cp.b to update mtd partition as flash router? root@OpenWrt:/mnt/sda1/nand# ./nandwrite /bin/ash: ./nandwrite: not found root@OpenWrtby youxiaojie - Debian
ipaddr=192.168.0.231 serverip=192.168.0.220 baudrate=115200 bootcmd_mmc=run mmc_init; run set_bootargs_mmc; run mmc_boot bootcmd_sata=run sata_init; run set_bootargs_sata; run sata_boot; bootcmd_usb=run usb_init; run set_bootargs_usb; run usb_boot; bootdelay=10 console=ttyS0,115200 device=0:1 ethact=egiga0 if_netconsole=ping $serverip led_error=orange blinking led_exit=green off led_by youxiaojie - Debian
Thanks for prompt. I try to solve it bymyself first. and than ask for your help.by youxiaojie - Debian
I make a ext3 udisk, tar -xjzf /home/allan/Documents/pogoplug/v4/softwares/Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2, boot with uboot 201407version, but,shows: U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:59:45) Pogoplug V4by youxiaojie - Debian
I just want to have a try.the other reason is I found your ubi/nand tools is for linux not openwrt. and I have to run some special software, such as softether vpn. so I hope the binary code is compatible.by youxiaojie - Debian