Hello Bodhi, thanks for clearing up my questions, so I can focus on rebuilding the Pogo! My current envs now are: OX820 # printenv dt_bootm=bootm $uimage_addr $uinitrd_addr $dtb_addr autoload=no baudrate=115200 bootargs=console=ttyS0,115200n8 bootcmd=run dt_bootcmd_ide bootdelay=3 console=console=ttyS0,115200n8 dt_bootcmd_ide=ide start; run dt_ide_bootcmd; ide stop; reset dt_by hacksome - uBoot
Hello Bodhi, thanks for your reply. QuoteYou should have stopped here and post question :) I now know ;) I succesfully managed to revive the box using this procedure: https://forum.doozan.com/read.php?2,32994 I had to modify some things and have manually ¨created¨ the disk with only the perl part of the script and manually: dd if=/home/sataboot/boot/u-boot-spl.bin of=/dev/sdbby hacksome - uBoot
First I would like to thank all people like Bodhi en many more to provide means to keep legacy hardware up and running. Unfortunately to keep it running is something more challenging. After a lot of fiddling en trying I managed to have a working PogoplugPro (oxnas) booting from USB. I had it installed with U-Boot 2013.10-tld-5 and Debian running. In an attempt to update the uboot to 201by hacksome - uBoot