Spent some time prepping USB with rootfs, was able to login to the Debian installer :-) Don't want to reinstall it, so restarted again via kwboot and with magic command : nand read.e 0x1200000 0x200000 0x600000;nand read.e 0x2000000 0x800000 0x1000000;bootm 0x1200000 0x2000000 was able to boot in my Debian on one of the installed drives. Forgot to save boot log, sorry. How can I writby egor.tio - uBoot
If possible, I would like to keep booting NAS from NAND.by egor.tio - uBoot
Hey Bodhi, my NAS is back from loop!!! Many thanks! U-Boot 2017.07-tld-2-rc1-gead3e3302f-dirty (Sep 13 2021 - 13:54:56 -0700) NETGEAR READYNAS DUO V2 SoC: Kirkwood 88F6282_A1 I2C: ready DRAM: 256 MiB WARNING: Caches not enabled G762 Fan controller: Successfully initialized. Enabled USB 2.0 Power. Enabled USB 3.0 Power. Running HDD staggered spin-up... Enabling HDD-0 Power inby egor.tio - uBoot
I was leaving it unplugged for hours with same result... Will try new uboot now, thank you!by egor.tio - uBoot
Just to clarify - I'm starting kwboot from another linux server, being connected via USB2TTL cable kwboot -t -B 115200 /dev/ttyUSB0 -b /home/downloads/u-boot.bin -p Sending boot message. Please reboot the target...| Sending boot image... 0 % [......................................................................] --- cut here --- 98 % [............................................by egor.tio - uBoot
Hi Bodhi, Sadly no progress, whatever way device boots (itself from nand or via kwboot) it stucks in same loop. USB boot with pressed Backup button is ignored.by egor.tio - uBoot
May be uboot.bin taken from uboot.bin is not the best option? Are there any other images to use with kwboot?by egor.tio - uBoot
Restarted today the NAS to try your advises and stuck in another boot loop... After executing kwboot and sending image to device, it starts booting and then: | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ |by egor.tio - uBoot
But if I want to continue boot from NAND or this option won't work anymore?by egor.tio - uBoot
printenv now has some "install_mode=true" on the last line: baudrate=115200 loads_echo=0 ipaddr=192.168.58.21 serverip=192.168.58.135 rootpath=/mnt/ARM_FS/ netmask=255.255.255.0 run_diag=no console=console=ttyS0,115200 CASset=min ethprime=egiga0 bootargs_root=root=/dev/nfs rw bootargs_end=:::DB88FXX81:eth0:none image_name=uImage standalone=fsload 0x2000000 $(image_name);by egor.tio - uBoot
Marvell>> boot (Re)start USB... USB: scanning bus for devices... 1 USB Device(s) found Waiting for storage device(s) to settle before scanning... 0 Storage Device(s) found ** Can't read from device 0 ** ** Unable to use usb 0:1 for fatload ** ** Can't read from device 0 ** ** Unable to use usb 0:1 for fatload ** ## Booting image at 01200000 ... Bad Magic Numberby egor.tio - uBoot
Managed to boot it with kwboot and uboot.bin image found in this forum. Here is the output of booting and printenv: | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| |by egor.tio - uBoot
Out of luck today - restarted NAS and now it stuck even before the moment where I could stop boot sequence: __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | |by egor.tio - uBoot
Hi folks, Stuck in similar situation, can someone help me please? After working ok for years with Debian on-board, my NAS stuck i boot loop after I've added 2nd disk today. If I manually pause the boot and enter "nand read.e 0x1200000 0x200000 0x600000;nand read.e 0x2000000 0x800000 0x1000000;bootm 0x1200000 0x2000000" it boots ok from disk. But after a restart it goes in bootby egor.tio - uBoot