bodhi Wrote: ------------------------------------------------------- > gov, > > > what does this point too...USB port failures?? > > Yes it looks like a HW problem. Normally, I would > recommend checking the power supply first to make > sure it is not a power problem. However, this plug > has an internal power supply, so even it is > removable, you can�by gov - Rescue System
yeah i did try all ports and with different usb stick too..one is sandisk cruzer blade and the other is from kingston.... i earlier before flashing new uboot tried "dmesg" and it did not show any usb drives..... but now pogoplug do not goes back stock os even with no usb plugged.... not a big deal though....but can u tell me any other way to get the usb ports working or anyotheby gov - Rescue System
here is the printenv from netconsole terminal window.. PogoE02> printenv printenv arcNumber=2097 bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uby gov - Rescue System
> > At this point, you can boot with the new USB > rootfs. > > > > > > pls guide me how to go about it.. > > > > Thanks bodhi ser i did everything write...took some time to read all the post u gave it in wiki thread...but as i was saying that dmesg on pogoplug isn't detecting any usb drives..i made a rootfs dribe drom debian exactly as uby gov - Rescue System
rayknight Wrote: > Your command for setting the address is incorrect. > Change: > > ./fw_printenv ethaddr 00:xx:31:xx:xx:xx > > to > > ./fw_setenv ethaddr 00:xx:31:xx:xx:xx > > > To set the variable. You can then check it by > entering: > > ./fw_printenv ethaddr > > > Ray yeah bro i figured that out...but as said it befby gov - Rescue System
hello Bodhi ser.. I have flashed new boot image and I don't know how to go forward after this step. Pogoplug:/tmp$ ./flash_erase /dev/mtd0 0 4 Erasing 128 Kibyte ยง 60000 -- 100 % complete Pogoplug:/tmp$ ./nandwrite /dev/mtd0 uboot.2017.07-tld-1.pogo_e02.mtd0.kwb Writing data to block 0 at offset 0x0 Writing data to block 1 at offset 0x20000 Writing data to block 2 at offset 0by gov - Rescue System
<hi @bodhi > <bro I haven't done anything yet but Pogoplug E02 does not show any pen drive attached to it..I tried front port and back port and 2 pen drives..one new one with usb 3 and one old one .o usb..both sandsisk ones.....I tried this command in terminal dmesg..with following output> Pogoplug:~$ dmesg [ 0.000000] Linux version 2.6.22.18 (bdietrich@buildman) (gcby gov - Rescue System
bodhi Wrote: ------------------------------------------------------- > I cannot help you with Arch. However, you can boot > Debian with Jeff 's u-boot. > > Use a USB flash drive, install the rootfs > Debian-6.5.7-kirkwood-tld-1-rootfs-bodhi.tar.bz2 > from the release thread. > > https://forum.doozan.com/read.php?2,12096 > > And try booting with it.by gov - Rescue System
hello all... i have a pogoplus E02 which i used to run archlinux arm on it...long ago...i think flashed jeff uboot at that time and used to run arch linux... now i want to use pogoplus e02 but i cant ssh into it...how can i ssh into it....please can anyone point me to the complete guide..Thanksby gov - Rescue System