pogoplus 02 February 04, 2024 04:58AM |
Registered: 9 months ago Posts: 9 |
Re: pogoplus 02 February 04, 2024 10:39PM |
Admin Registered: 13 years ago Posts: 19,016 |
Re: pogoplus 02 February 05, 2024 10:31AM |
Registered: 9 months ago Posts: 9 |
Pogoplug:/$ ls -l drwxr-xr-x 2 root root 0 Nov 4 2009 bin drwxr-xr-x 5 root root 0 Feb 26 2008 dev drwxr-xr-x 5 root root 0 Mar 17 2013 etc drwxr-xr-x 2 root root 0 Nov 4 2009 lib lrwxrwxrwx 1 root root 11 Nov 4 2009 linuxrc -> bin/busybox drwxr-xr-x 2 root root 0 Dec 18 2008 mnt dr-xr-xr-x 39 root root 0 Jan 1 1970 proc drwxr-xr-x 2 root root 0 Mar 17 2013 root drwxr-xr-x 2 root root 0 Nov 4 2009 sbin drwxr-xr-x 10 root root 0 Jan 1 1970 sys drwxrwxrwt 3 root root 80 Jan 1 00:01 tmp -rw-r--r-- 1 root root 524288 Mar 17 2013 uboot-original-mtd0.kwb drwxr-xr-x 7 root root 0 Apr 9 2012 usr lrwxrwxrwx 1 root root 8 Nov 4 2009 var -> /tmp/var
Re: pogoplus 02 February 05, 2024 01:55PM |
Registered: 9 months ago Posts: 9 |
Pogoplug:~$ dmesg [ 0.000000] Linux version 2.6.22.18 (bdietrich@buildman) (gcc version 4.2.1) #81 Tue Oct 19 16:05:00 PDT 2010 [ 0.000000] CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053177 [ 0.000000] Machine: Feroceon-KW [ 0.000000] Using UBoot passing parameters structure [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] DMA zone: 512 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 65024 pages, LIFO batch:15 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] CPU0: D VIVT write-back cache [ 0.000000] CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] Built 1 zonelists. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 ro [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.010000] Memory: 256MB 0MB 0MB 0MB = 256MB total [ 0.010000] Memory: 255872KB available (3592K code, 253K data, 124K init) [ 0.010000] Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776) [ 0.250000] Mount-cache hash table entries: 512 [ 0.250000] CPU: Testing write buffer coherency: ok [ 0.250000] NET: Registered protocol family 16 [ 0.250000] [ 0.250000] CPU Interface [ 0.250000] ------------- [ 0.250000] SDRAM_CS0 ....base 00000000, size 256MB [ 0.250000] SDRAM_CS1 ....disable [ 0.250000] SDRAM_CS2 ....disable [ 0.250000] SDRAM_CS3 ....disable [ 0.250000] PEX0_MEM ....base e8000000, size 128MB [ 0.250000] PEX0_IO ....base f2000000, size 1MB [ 0.250000] INTER_REGS ....base f1000000, size 1MB [ 0.250000] NFLASH_CS ....base fa000000, size 2MB [ 0.250000] SPI_CS ....base f4000000, size 16MB [ 0.250000] BOOT_ROM_CS ....no such [ 0.250000] DEV_BOOTCS ....no such [ 0.250000] CRYPT_ENG ....base f0000000, size 2MB [ 0.250000] [ 0.250000] Marvell Development Board (LSP Version KW_LSP_4.2.7_patch21_with_rx_desc_tuned)-- SHEEVA PLUG Soc: 88F6281 A0 LE [ 0.250000] [ 0.250000] Detected Tclk 200000000 and SysClk 400000000 [ 0.250000] MV Buttons Device Load [ 0.250000] Marvell USB EHCI Host controller #0: c0652600 [ 0.750000] PEX0 interface detected no Link. [ 0.750000] PCI: bus0: Fast back to back transfers enabled [ 0.750000] SCSI subsystem initialized [ 0.750000] usbcore: registered new interface driver usbfs [ 0.750000] usbcore: registered new interface driver hub [ 0.750000] usbcore: registered new device driver usb [ 0.750000] NET: Registered protocol family 2 [ 0.760000] Time: kw_clocksource clocksource has been installed. [ 0.850000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.850000] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.850000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.850000] TCP: Hash tables configured (established 8192 bind 8192) [ 0.850000] TCP reno registered [ 0.880000] RTC has been updated!!! [ 0.880000] RTC registered [ 0.880000] Use the XOR engines (acceleration) for enhancing the following functions: [ 0.880000] o RAID 5 Xor calculation [ 0.880000] o kernel memcpy [ 0.880000] o kenrel memzero [ 0.880000] Number of XOR engines to use: 4 [ 0.880000] cesadev_init(c00117b0) [ 0.880000] mvCesaInit: sessions=640, queue=64, pSram=f0000000 [ 0.880000] MV Buttons Driver Load [ 0.880000] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 0.880000] squashfs: LZMA suppport for slax.org by jro [ 0.880000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.880000] io scheduler noop registered [ 0.880000] io scheduler anticipatory registered (default) [ 0.900000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 0.900000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 0.910000] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize [ 0.920000] Loading Marvell Ethernet Driver: [ 0.920000] o Cached descriptors in DRAM [ 0.920000] o DRAM SW cache-coherency [ 0.930000] o Single RX Queue support - ETH_DEF_RXQ=0 [ 0.930000] o Single TX Queue support - ETH_DEF_TXQ=0 [ 0.940000] o TCP segmentation offload enabled [ 0.940000] o Receive checksum offload enabled [ 0.950000] o Transmit checksum offload enabled [ 0.950000] o Network Fast Processing (Routing) supported [ 0.960000] o Driver ERROR statistics enabled [ 0.960000] o Driver INFO statistics enabled [ 0.970000] o Proc tool API enabled [ 0.970000] o Rx descripors: q0=128 [ 0.970000] o Tx descripors: q0=532 [ 0.980000] o Loading network interface(s): [ 0.990000] o eth0, ifindex = 1, GbE port = 0 [ 0.990000] o eth1, ifindex = 2, GbE port = 1 [ 1.000000] [ 1.000000] mvFpRuleDb (cfdf6000): 2048 entries, 8192 bytes [ 1.000000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 1.010000] Copyright (c) 1999-2006 Intel Corporation. [ 1.020000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 1.020000] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.030000] [ 1.030000] Warning Sata is Powered Off [ 1.030000] NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $ [ 1.040000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit) [ 1.050000] Scanning device for bad blocks [ 1.100000] Using static partition definition [ 1.110000] Creating 4 MTD partitions on "nand_mtd": [ 1.110000] 0x00000000-0x00100000 : "u-boot" [ 1.120000] 0x00100000-0x00500000 : "uImage" [ 1.120000] 0x00500000-0x02500000 : "root" [ 1.130000] 0x02500000-0x08000000 : "data" [ 1.130000] ehci_marvell ehci_marvell.70059: Marvell Orion EHCI [ 1.140000] ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 [ 1.180000] ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 [ 1.200000] ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.200000] usb usb1: configuration #1 chosen from 1 choice [ 1.210000] hub 1-0:1.0: USB hub found [ 1.210000] hub 1-0:1.0: 1 port detected [ 1.330000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.330000] USB Universal Host Controller Interface driver v3.0 [ 3.730000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 3.730000] usbcore: registered new interface driver usblp [ 3.740000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 3.740000] Initializing USB Mass Storage driver... [ 3.750000] usbcore: registered new interface driver usb-storage [ 3.750000] USB Mass Storage support registered. [ 3.760000] mice: PS/2 mouse device common for all mice [ 3.760000] i2c /dev entries driver [ 3.770000] Linux telephony interface: v1.00 [ 3.770000] md: linear personality registered for level -1 [ 3.780000] md: raid0 personality registered for level 0 [ 3.780000] md: raid1 personality registered for level 1 [ 3.960000] raid6: int32x1 97 MB/s [ 4.130000] raid6: int32x2 114 MB/s [ 4.300000] raid6: int32x4 122 MB/s [ 4.470000] raid6: int32x8 110 MB/s [ 4.470000] raid6: using algorithm int32x4 (122 MB/s) [ 4.470000] md: raid6 personality registered for level 6 [ 4.480000] md: raid5 personality registered for level 5 [ 4.480000] md: raid4 personality registered for level 4 [ 4.490000] raid5: measuring checksumming speed [ 4.540000] arm4regs : 1083.600 MB/sec [ 4.590000] 8regs : 754.800 MB/sec [ 4.640000] 32regs : 900.000 MB/sec [ 4.640000] raid5: using function: arm4regs (1083.600 MB/sec) [ 4.650000] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 4.650000] dm_crypt using the OCF package. [ 4.660000] sdhci: Secure Digital Host Controller Interface driver [ 4.660000] sdhci: Copyright(c) Pierre Ossman [ 7.050000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 7.050000] usbcore: registered new interface driver usbhid [ 7.060000] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 7.060000] TCP cubic registered [ 7.070000] NET: Registered protocol family 1 [ 7.070000] NET: Registered protocol family 17 [ 7.080000] md: Autodetecting RAID arrays. [ 7.080000] md: autorun ... [ 7.080000] md: ... autorun DONE. [ 8.810000] Empty flash at 0x009ac208 ends at 0x009ac800 [ 12.610000] VFS: Mounted root (jffs2 filesystem) readonly. [ 12.620000] Freeing init memory: 124K [ 14.760000] eth0: link down [ 14.760000] eth0: started [ 15.680000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 17.960000] eth0: link up, full duplex, speed 1 Gbps [ 18.110000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 20.540000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 22.980000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 25.450000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 27.860000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 30.290000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 32.730000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 35.170000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 37.610000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 40.050000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 42.480000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 44.920000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 47.360000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 49.800000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 52.230000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 54.670000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 57.110000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 61.990000] printk: 1 messages suppressed. [ 61.990000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 66.860000] printk: 1 messages suppressed. [ 66.860000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 71.740000] printk: 1 messages suppressed. [ 71.740000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 76.610000] printk: 1 messages suppressed. [ 76.610000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 81.490000] printk: 1 messages suppressed. [ 81.490000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 86.360000] printk: 1 messages suppressed. [ 86.360000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 91.240000] printk: 1 messages suppressed. [ 91.240000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 96.110000] printk: 1 messages suppressed. [ 96.110000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 100.990000] printk: 1 messages suppressed. [ 100.990000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 105.870000] printk: 1 messages suppressed. [ 105.870000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 110.740000] printk: 1 messages suppressed. [ 110.740000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 118.050000] printk: 2 messages suppressed. [ 118.050000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 122.930000] printk: 1 messages suppressed. [ 122.930000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 127.810000] printk: 1 messages suppressed. [ 127.810000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 132.680000] printk: 1 messages suppressed. [ 132.680000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 137.560000] printk: 1 messages suppressed. [ 137.560000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 142.430000] printk: 1 messages suppressed. [ 142.430000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 147.310000] printk: 1 messages suppressed. [ 147.310000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 152.180000] printk: 1 messages suppressed. [ 152.180000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 157.060000] printk: 1 messages suppressed. [ 157.060000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 161.930000] printk: 1 messages suppressed. [ 161.930000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 166.810000] printk: 1 messages suppressed. [ 166.810000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 171.680000] printk: 1 messages suppressed. [ 171.680000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 176.560000] printk: 1 messages suppressed. [ 176.560000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 181.440000] printk: 1 messages suppressed. [ 181.440000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 186.310000] printk: 1 messages suppressed. [ 186.310000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 191.190000] printk: 1 messages suppressed. [ 191.190000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 196.060000] printk: 1 messages suppressed. [ 196.060000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 200.940000] printk: 1 messages suppressed. [ 200.940000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 205.810000] printk: 1 messages suppressed. [ 205.810000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 210.690000] printk: 1 messages suppressed. [ 210.690000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 218.000000] printk: 2 messages suppressed. [ 218.000000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 222.880000] printk: 1 messages suppressed. [ 222.880000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 227.750000] printk: 1 messages suppressed. [ 227.750000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 232.630000] printk: 1 messages suppressed. [ 232.630000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 237.500000] printk: 1 messages suppressed. [ 237.500000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 242.380000] printk: 1 messages suppressed. [ 242.380000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
Pogoplug:~$ df -h Filesystem Size Used Available Use% Mounted on /dev/mtdblock2 32.0M 17.2M 14.8M 54% / none 125.0M 4.0k 125.0M 0% /tmp
Re: pogoplus 02 February 06, 2024 06:52AM |
Registered: 9 months ago Posts: 9 |
Pogoplug:/tmp$ ./flash_erase /dev/mtd0 0 4 Erasing 128 Kibyte § 60000 -- 100 % complete Pogoplug:/tmp$ ./nandwrite /dev/mtd0 uboot.2017.07-tld-1.pogo_e02.mtd0.kwb Writing data to block 0 at offset 0x0 Writing data to block 1 at offset 0x20000 Writing data to block 2 at offset 0x40000 Writing data to block 3 at offset 0x60000
Pogoplug:/tmp$ /usr/sbin/flash_erase /dev/mtd0 0xc0000 1 Erase Total 1 Units Performing Flash Erase of length 131072 at offset 0xc0000 done
Pogoplug:/tmp$ /usr/sbin/nandwrite -s 786432 /dev/mtd0 uboot.2016.05-tld-1.environment.img Writing data to block 6 at offset 0xc0000
Pogoplug:/tmp$ ./fw_printenv ethaddr ethaddr=52:xx:xx:xx:11:xx
Pogoplug:/tmp$ ./fw_printenv ethaddr 00:xx:31:xx:xx:xx ethaddr=52:xx:xx:xx11:xx ## Error: "00:xx:31:xx:F2:xx" not defined
Re: pogoplus 02 February 07, 2024 08:10PM |
Registered: 9 years ago Posts: 462 |
./fw_printenv ethaddr 00:xx:31:xx:xx:xxto
./fw_setenv ethaddr 00:xx:31:xx:xx:xx
./fw_printenv ethaddr
Re: pogoplus 02 February 08, 2024 08:48AM |
Admin Registered: 13 years ago Posts: 19,016 |
Re: pogoplus 02 February 08, 2024 10:47AM |
Registered: 9 months ago Posts: 9 |
> ./fw_printenv ethaddr 00:xx:31:xx:xx:xx >> to
> ./fw_setenv ethaddr 00:xx:31:xx:xx:xx >>
> ./fw_printenv ethaddr >>
Re: pogoplus 02 February 08, 2024 10:52AM |
Registered: 9 months ago Posts: 9 |
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:13:18 -0700) Pogo E02 gcc (Debian 6.3.0-18) 6.3.0 20170516 GNU ld (GNU Binutils for Debian) 2.28 Hit any key to stop autoboot: 0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... cannot reset port 1!? 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Unknown command 'ide' - try 'help' Unknown command 'mmc' - try 'help' loading envs from usb 0 ... ** Bad device usb 0 ** loading envs from usb 1 ... ** Bad device usb 1 ** loading envs from usb 2 ... ** Bad device usb 2 ** loading envs from usb 3 ... ** Bad device usb 3 ** loading envs from ide 0 ... ** Bad device ide 0 ** loading envs from ide 1 ... ** Bad device ide 1 ** loading envs from ide 2 ... ** Bad device ide 2 ** loading envs from ide 3 ... ** Bad device ide 3 ** loading envs from mmc 0 ... ** Bad device mmc 0 ** loading envs from mmc 1 ... ** Bad device mmc 1 ** loading envs from mmc 2 ... ** Bad device mmc 2 ** loading envs from mmc 3 ... ** Bad device mmc 3 ** running scan_disk ... Scan device usb device usb 0:1 ** Bad device usb 0 ** device usb 1:1 ** Bad device usb 1 ** device usb 2:1 ** Bad device usb 2 ** device usb 3:1 ** Bad device usb 3 ** Scan device ide Unknown command 'ide' - try 'help' device ide 0:1 ** Bad device ide 0 ** device ide 1:1 ** Bad device ide 1 ** device ide 2:1 ** Bad device ide 2 ** device ide 3:1 ** Bad device ide 3 ** Scan device mmc Unknown command 'mmc' - try 'help' device mmc 0:1 ** Bad device mmc 0 ** device mmc 1:1 ** Bad device mmc 1 ** device mmc 2:1 ** Bad device mmc 2 ** device mmc 3:1 ** Bad device mmc 3 ** loading uImage ... ** Bad device usb 0 ** loading uInitrd ... ** Bad device usb 0 ** loading DTB /boot/dts/kirkwood-pogo_e02.dtb ... ** Bad device usb 0 ** Wrong Image Format for bootm command ERROR: can't get kernel image! PogoE02>
Re: pogoplus 02 February 08, 2024 11:00AM |
Registered: 9 months ago Posts: 9 |
PogoE02> printenv printenv arcNumber=2097 bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi; sleep 3 bootdelay=10 bootdev=usb device=0:1 device_type=mmc devices=usb ide mmc disk_number=3 disks=0 1 2 3 dtb_file=/boot/dts/kirkwood-pogo_e02.dtb ethact=egiga0 ethaddr=00:25:31:02:F2:79 if_netconsole=ping $serverip init_ide=ide reset init_mmc=mmc rescan init_usb=usb start ipaddr=192.168.1.2 led_error=orange blinking led_exit=green off led_init=green blinking load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file load_dtb_addr=0x1c00000 load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd load_initrd_addr=0x1100000 load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage load_uimage_addr=0x800000 machid=0x831 mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) ncip=192.168.1.7 partition=nand0,2 preboot=run if_netconsole start_netconsole preboot_nc=run if_netconsole start_netconsole scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done scan_ide=ide reset scan_mmc=mmc rescan scan_usb=usb start serverip=192.168.1.7 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=nc stdin=nc stdout=nc uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in $disks; do if test $uenv_loaded -eq 0; then setenv device_type $devtype; setenv disk_number $disknum; run uenv_read; fi; done; done; uenv_loaded=0 uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_ready_retry=15
Re: pogoplus 02 February 09, 2024 02:18AM |
Admin Registered: 13 years ago Posts: 19,016 |
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:13:18 -0700) Pogo E02 gcc (Debian 6.3.0-18) 6.3.0 20170516 GNU ld (GNU Binutils for Debian) 2.28 Hit any key to stop autoboot: 0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... cannot reset port 1!? 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found
Re: pogoplus 02 February 09, 2024 07:53AM |
Registered: 9 months ago Posts: 9 |
Pogoplug:~$ dmesg [ 0.000000] Linux version 2.6.22.18 (bdietrich@buildman) (gcc version 4.2.1) #81 Tue Oct 19 16:05:00 PDT 2010 [ 0.000000] CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053177 [ 0.000000] Machine: Feroceon-KW [ 0.000000] Using UBoot passing parameters structure [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] DMA zone: 512 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 65024 pages, LIFO batch:15 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] CPU0: D VIVT write-back cache [ 0.000000] CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets [ 0.000000] Built 1 zonelists. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 ro [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.010000] Memory: 256MB 0MB 0MB 0MB = 256MB total [ 0.010000] Memory: 255872KB available (3592K code, 253K data, 124K init) [ 0.010000] Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776) [ 0.250000] Mount-cache hash table entries: 512 [ 0.250000] CPU: Testing write buffer coherency: ok [ 0.250000] NET: Registered protocol family 16 [ 0.250000] [ 0.250000] CPU Interface [ 0.250000] ------------- [ 0.250000] SDRAM_CS0 ....base 00000000, size 256MB [ 0.250000] SDRAM_CS1 ....disable [ 0.250000] SDRAM_CS2 ....disable [ 0.250000] SDRAM_CS3 ....disable [ 0.250000] PEX0_MEM ....base e8000000, size 128MB [ 0.250000] PEX0_IO ....base f2000000, size 1MB [ 0.250000] INTER_REGS ....base f1000000, size 1MB [ 0.250000] NFLASH_CS ....base fa000000, size 2MB [ 0.250000] SPI_CS ....base f4000000, size 16MB [ 0.250000] BOOT_ROM_CS ....no such [ 0.250000] DEV_BOOTCS ....no such [ 0.250000] CRYPT_ENG ....base f0000000, size 2MB [ 0.250000] [ 0.250000] Marvell Development Board (LSP Version KW_LSP_4.2.7_patch21_with_rx_desc_tuned)-- SHEEVA PLUG Soc: 88F6281 A0 LE [ 0.250000] [ 0.250000] Detected Tclk 200000000 and SysClk 400000000 [ 0.250000] MV Buttons Device Load [ 0.250000] Marvell USB EHCI Host controller #0: c0652600 [ 0.750000] PEX0 interface detected no Link. [ 0.750000] PCI: bus0: Fast back to back transfers enabled [ 0.750000] SCSI subsystem initialized [ 0.750000] usbcore: registered new interface driver usbfs [ 0.750000] usbcore: registered new interface driver hub [ 0.750000] usbcore: registered new device driver usb [ 0.750000] NET: Registered protocol family 2 [ 0.760000] Time: kw_clocksource clocksource has been installed. [ 0.850000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.850000] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.850000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.850000] TCP: Hash tables configured (established 8192 bind 8192) [ 0.850000] TCP reno registered [ 0.880000] RTC has been updated!!! [ 0.880000] RTC registered [ 0.880000] Use the XOR engines (acceleration) for enhancing the following functions: [ 0.880000] o RAID 5 Xor calculation [ 0.880000] o kernel memcpy [ 0.880000] o kenrel memzero [ 0.880000] Number of XOR engines to use: 4 [ 0.880000] cesadev_init(c00117b0) [ 0.880000] mvCesaInit: sessions=640, queue=64, pSram=f0000000 [ 0.880000] MV Buttons Driver Load [ 0.880000] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 0.880000] squashfs: LZMA suppport for slax.org by jro [ 0.880000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.880000] io scheduler noop registered [ 0.880000] io scheduler anticipatory registered (default) [ 0.900000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 0.900000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 0.910000] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize [ 0.920000] Loading Marvell Ethernet Driver: [ 0.920000] o Cached descriptors in DRAM [ 0.920000] o DRAM SW cache-coherency [ 0.930000] o Single RX Queue support - ETH_DEF_RXQ=0 [ 0.930000] o Single TX Queue support - ETH_DEF_TXQ=0 [ 0.940000] o TCP segmentation offload enabled [ 0.940000] o Receive checksum offload enabled [ 0.950000] o Transmit checksum offload enabled [ 0.950000] o Network Fast Processing (Routing) supported [ 0.960000] o Driver ERROR statistics enabled [ 0.960000] o Driver INFO statistics enabled [ 0.970000] o Proc tool API enabled [ 0.970000] o Rx descripors: q0=128 [ 0.970000] o Tx descripors: q0=532 [ 0.980000] o Loading network interface(s): [ 0.990000] o eth0, ifindex = 1, GbE port = 0 [ 0.990000] o eth1, ifindex = 2, GbE port = 1 [ 1.000000] [ 1.000000] mvFpRuleDb (cfdf6000): 2048 entries, 8192 bytes [ 1.000000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 1.010000] Copyright (c) 1999-2006 Intel Corporation. [ 1.020000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 1.020000] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.030000] [ 1.030000] Warning Sata is Powered Off [ 1.030000] NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $ [ 1.040000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit) [ 1.050000] Scanning device for bad blocks [ 1.100000] Using static partition definition [ 1.110000] Creating 4 MTD partitions on "nand_mtd": [ 1.110000] 0x00000000-0x00100000 : "u-boot" [ 1.120000] 0x00100000-0x00500000 : "uImage" [ 1.120000] 0x00500000-0x02500000 : "root" [ 1.130000] 0x02500000-0x08000000 : "data" [ 1.130000] ehci_marvell ehci_marvell.70059: Marvell Orion EHCI [ 1.140000] ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 [ 1.180000] ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 [ 1.200000] ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.200000] usb usb1: configuration #1 chosen from 1 choice [ 1.210000] hub 1-0:1.0: USB hub found [ 1.210000] hub 1-0:1.0: 1 port detected [ 1.330000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.330000] USB Universal Host Controller Interface driver v3.0 [ 3.730000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 3.730000] usbcore: registered new interface driver usblp [ 3.740000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 3.740000] Initializing USB Mass Storage driver... [ 3.750000] usbcore: registered new interface driver usb-storage [ 3.750000] USB Mass Storage support registered. [ 3.760000] mice: PS/2 mouse device common for all mice [ 3.760000] i2c /dev entries driver [ 3.770000] Linux telephony interface: v1.00 [ 3.770000] md: linear personality registered for level -1 [ 3.780000] md: raid0 personality registered for level 0 [ 3.780000] md: raid1 personality registered for level 1 [ 3.960000] raid6: int32x1 97 MB/s [ 4.130000] raid6: int32x2 114 MB/s [ 4.300000] raid6: int32x4 122 MB/s [ 4.470000] raid6: int32x8 110 MB/s [ 4.470000] raid6: using algorithm int32x4 (122 MB/s) [ 4.470000] md: raid6 personality registered for level 6 [ 4.480000] md: raid5 personality registered for level 5 [ 4.480000] md: raid4 personality registered for level 4 [ 4.490000] raid5: measuring checksumming speed [ 4.540000] arm4regs : 1083.600 MB/sec [ 4.590000] 8regs : 754.800 MB/sec [ 4.640000] 32regs : 900.000 MB/sec [ 4.640000] raid5: using function: arm4regs (1083.600 MB/sec) [ 4.650000] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 4.650000] dm_crypt using the OCF package. [ 4.660000] sdhci: Secure Digital Host Controller Interface driver [ 4.660000] sdhci: Copyright(c) Pierre Ossman [ 7.050000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 7.050000] usbcore: registered new interface driver usbhid [ 7.060000] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 7.060000] TCP cubic registered [ 7.070000] NET: Registered protocol family 1 [ 7.070000] NET: Registered protocol family 17 [ 7.080000] md: Autodetecting RAID arrays. [ 7.080000] md: autorun ... [ 7.080000] md: ... autorun DONE. [ 8.810000] Empty flash at 0x009ac208 ends at 0x009ac800 [ 12.610000] VFS: Mounted root (jffs2 filesystem) readonly. [ 12.620000] Freeing init memory: 124K [ 14.760000] eth0: link down [ 14.760000] eth0: started [ 15.680000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 17.960000] eth0: link up, full duplex, speed 1 Gbps [ 18.110000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 20.540000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 22.980000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 25.450000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 27.860000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 30.290000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 32.730000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 35.170000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 37.610000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 40.050000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 42.480000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 44.920000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 47.360000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 49.800000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 52.230000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 54.670000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 57.110000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 61.990000] printk: 1 messages suppressed. [ 61.990000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 66.860000] printk: 1 messages suppressed. [ 66.860000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 71.740000] printk: 1 messages suppressed. [ 71.740000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 76.610000] printk: 1 messages suppressed. [ 76.610000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 81.490000] printk: 1 messages suppressed. [ 81.490000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 86.360000] printk: 1 messages suppressed. [ 86.360000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 91.240000] printk: 1 messages suppressed. [ 91.240000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 96.110000] printk: 1 messages suppressed. [ 96.110000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 100.990000] printk: 1 messages suppressed. [ 100.990000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 105.870000] printk: 1 messages suppressed. [ 105.870000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 110.740000] printk: 1 messages suppressed. [ 110.740000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 118.050000] printk: 2 messages suppressed. [ 118.050000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 122.930000] printk: 1 messages suppressed. [ 122.930000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 127.810000] printk: 1 messages suppressed. [ 127.810000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 132.680000] printk: 1 messages suppressed. [ 132.680000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 137.560000] printk: 1 messages suppressed. [ 137.560000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 142.430000] printk: 1 messages suppressed. [ 142.430000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 147.310000] printk: 1 messages suppressed. [ 147.310000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 152.180000] printk: 1 messages suppressed. [ 152.180000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 157.060000] printk: 1 messages suppressed. [ 157.060000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 161.930000] printk: 1 messages suppressed. [ 161.930000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 166.810000] printk: 1 messages suppressed. [ 166.810000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 171.680000] printk: 1 messages suppressed. [ 171.680000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 176.560000] printk: 1 messages suppressed. [ 176.560000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 181.440000] printk: 1 messages suppressed. [ 181.440000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 186.310000] printk: 1 messages suppressed. [ 186.310000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 191.190000] printk: 1 messages suppressed. [ 191.190000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 196.060000] printk: 1 messages suppressed. [ 196.060000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 200.940000] printk: 1 messages suppressed. [ 200.940000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 205.810000] printk: 1 messages suppressed. [ 205.810000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 210.690000] printk: 1 messages suppressed. [ 210.690000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 218.000000] printk: 2 messages suppressed. [ 218.000000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 222.880000] printk: 1 messages suppressed. [ 222.880000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 227.750000] printk: 1 messages suppressed. [ 227.750000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 232.630000] printk: 1 messages suppressed. [ 232.630000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 237.500000] printk: 1 messages suppressed. [ 237.500000] hub 1-0:1.0: connect-debounce failed, port 1 disabled [ 242.380000] printk: 1 messages suppressed. [ 242.380000] hub 1-0:1.0: connect-debounce failed, port 1 disabled
Pogoplug:~$ df -h Filesystem Size Used Available Use% Mounted on /dev/mtdblock2 32.0M 17.2M 14.8M 54% / none 125.0M 4.0k 125.0M 0% /tmp
Re: pogoplus 02 February 09, 2024 03:39PM |
Admin Registered: 13 years ago Posts: 19,016 |
Quote
NFS
NFS - HowTo set up NFS shares (and boot NFS rootfs), see also Debian 12 (bookworm) settings
Boot your Dockstar (and other plugs) using NFS rootfs, see also Debian 12 (bookworm) settings
Increase NFSD max_block_size
Reduce NFS threads
Re: pogoplus 02 February 11, 2024 12:35PM |
Registered: 9 months ago Posts: 9 |
Quote
NFS
>
> NFS - HowTo set up NFS shares (and boot NFS
> rootfs), see also Debian 12 (bookworm) settings
> Boot your Dockstar (and other plugs) using NFS
> rootfs, see also Debian 12 (bookworm) settings
> Increase NFSD max_block_size
> Reduce NFS threads