Rob, This panic was due to the USB drive being messed up. Shutdown the Pogo V3 completely (unplug power cord too). Take this drive to another Linux box and run e2fsck to fix whatever problem it might have. And then cold start the Pogo V3 with it.by bodhi - Debian
bobafetthotmail, > I don't really want to activate it, I want to make > sure that whatever makes it stay dead in my nsa325 > will keep it dead also in others so people can > recover their nsa325 through kwboot fine just as I > can. That's why I said I need to look at my notes to see what's the most friendlay way to reverse this :) there are a few differentby bodhi - uBoot
bobafetthotmail, > @bodhi: thanks for taking the time to help kofec > on this even if it was not an issue of your u-boot > :) No problem :) But I would suggest in the mean time this should be moved to Rescue subforum. And people can continue posting there with problem. I thought that kofec just want to build new u-boot :) I'll ask Jeff if he can create another subforumby bodhi - Rescue System
varma Wrote: ------------------------------------------------------- > Thank you very much again, bodhi > > I tought it was a common file for all the Kirkwood > platform...my mistake My pleasure! ... It does look that way because they are in the same SoC family. But each board must be built separately.by bodhi - uBoot
kofec, It will not work with modern u-boot, i.e. it only works with much older u-boot. And LEDE doesn't need to do 2nd stage boot anyway. That's why I said it is not a good approach.by bodhi - Rescue System
rr4m, Good find! another dirty hack from Zyxel :) BTW, one thing that we have not figured out is which MCU this box has, I don't recall.by bodhi - Debian
kofec Wrote: ------------------------------------------------------- > As it is writen : > > https://github.com/lede-project/source/pull/732 > > > this commit allows to make both a standalone and > a second-stage u-boot for nsa310b, but only > first-stage u-boot is added in the makefile and > available in the build system. > > The reason is that whby bodhi - Rescue System
kofec, > [ 1.955387] Kernel panic - not syncing: VFS: > Unable to mount root fs on unknown-block(0,0) You've missed the bootargs env, so the kernel does not know where the rootfs is.by bodhi - Rescue System
QuoteI start your uboot - using kwboot - the write to flash. Thanks a lot for help. Maybe you can also fix 2nd boot stage in your uboot. I am not sure what you meant by 2nd boot stage?by bodhi - Rescue System
Try usb start fatload usb 0:3 0x2000000 lede-kirkwood-nsa310b-squashfs-factory.binby bodhi - Rescue System
Is the drive Ext2/3 or FAT? ext2load usb 0:3 0x1000000 uboot.binby bodhi - Rescue System
@kofec, Please use code tags.by bodhi - Rescue System
bobafetthotmail, > I tried to make a very barebones uboot so it can > be loaded with kwboot, but.... my nsa325's > hardware watchdog seems to be dead for good. It > does not show up and I can't trigger it in any > way. I've killed it :) when you use my patches it cannot run at all. Let me look at my notes for a simple mod to reactivate it. Update: BTWby bodhi - uBoot
Antonas, > Maybe there is a possibility of such a decision? > https://wrgms.com/entering-single-user-mode-on-a-s > ynology/ Possibly. Try it.by bodhi - uBoot
varma, > 1) installing this u-boot into a LG NAS N1T1 will > I be able to boot the stock OS? No. The LG N1T1 and the Guruplug are not on the support list (see 1st post). > 2)is compatible with Globalscale GuruPlug? Possibly you can use the u-boot image for Sheevaplug to boot the Guruplug. It might work , but no guarantee.by bodhi - uBoot
I've added the installation instruction in the release thread. QuoteZyxel NAS326 Installation Updated 24 Jan 2017by bodhi - Debian
See updated instruction above.by bodhi - Debian
We can do the GPIO. However, i2cset might just be easier to set the fan speed to very low value? I have not tried to experiement with it. i2cget works so i2cset has potentials.by bodhi - Debian
rr4m, > I just unscrewed the box (another time) - it is a > buzzer indeed, and it 'click-clack's :). No wonder why nobody has made it work on the NSA325/NSA310s :)) > > Also - fan. Nas326 has 3-pin fan (GND, VCC, > Sensor). There's way to turn it off and on - you > need to change values of 2 GPIO pins (this drops > VCC line from +12V to +0.5V andby bodhi - Debian
Hi David, It will be a while until I'll release new u-boot for this. Just a simple config switch that I've somehow missed during rebasing u-boot to 2015 version! but it will need rebuild to activate preboot again. If you can't live without it, pls let me know to raise its priority on my list.by bodhi - uBoot
Antonas, I don't have the Buffalo LS421De, so cannot tell you a specific way to gain root. But in the past, I recall seeing posts that decribes a possible way to gain root for this box. May be you should try (google search gave this): http://kuhnboy.blogspot.com/2014/08/gain-ssh-access-to-buffalo-linkstation.html If all fails, you can try to boot with a kernel that is a close cousin fby bodhi - uBoot
Joey, I know how it feels. My deep condolences to you and your love ones.by bodhi - Allwinner A10
Rob, While in Debian, download the attached DTB to /boot/dts: cd /boot/dts mv ox820-pogoplug-pro.dtb ox820-pogoplug-pro.dtb.old wget http://forum.doozan.com/file.php?2,file=1264,filename=ox820-pogoplug-pro.dtb,download=1 sync Reboot and try to set the ethaddr using fw_setenvby bodhi - Debian
I've released the Debian rootfs: http://forum.doozan.com/read.php?2,32146,32146#msg-32146by bodhi - Debian
JT, Different boxes. And yours was restricted by u-boot. Rob's was restricted by the kernel. Either way, I will need to look at these scenarios to rectify t before releasing new version of each.by bodhi - Debian
> I thought it might be my SanDisk Ultra Fit 32GB, > yea - quite possible. It is the problem. Might be the controller bug in this 32G version.by bodhi - Debian
QuoteTesting gpio-beeper (it's doesn't beep, but rather makes 'click-clack' sound - may be it's not a beeper at all?!): :) It does not seem to be a gpio-beeper. The Zyxel boxes seem to lack a conventional way to activate buzzer.by bodhi - Debian
bobafetthotmail, Nice script :) I've added it to the Wiki thread.by bodhi - uBoot
Rob, I'll compile a different version of the Pogo Pro DTB for you to test.by bodhi - Debian