bodhi Wrote: ------------------------------------------------------- > Kernel linux-5.4.2-kirkwood-tld-1 package has been > uploaded. Please see 1st post for download link. Just upgraded to kernel 5.4.2 on my Pogo-E02 and GoFlex-Net from kernel 5.1.1. Very nice - got the impression that reading files is faster :-) Thanks for the ongoing support, bodhi! Klausby mkl - Debian
Just installed on two Pogo E02 and two GoFlexNet's. Many thanks for keeping these devices alive :-) P.S.: The Pogo's are my digital VDR's with SAT>IP, the GoFlexNet acts as a small network server for storing recorded TV, scans from my network scanner etc.by mkl - Debian
Hi Bodhi, great! February is fine since I will be quite busy in January. Klausby mkl - uBoot
Hi Bodhi, that's good to know! I'd read a lot of posts (especially Davy's post about UART booting with the kwboot tool) and also Jeff's information about testing a new uBoot (http://projects.doozan.com/uboot/build_uboot.htm). The kwboot tool is probably the best option for my GoFlex Net. Investing in a JTAG solution (like this one: http://www.seeedstudio.com/depot/bus-piraby mkl - uBoot
Hi Bodhi, many thanks! You're right, Debian NTP resolves this problem to some extent but the actual time isn't available in the early boot process. I had some problems in the beginning because the synchronisation with the time server sometimes happened minutes later. My current quick-and-dirty solution was to smuggle a "sntp" command in one of the standard scripts which aby mkl - uBoot
Hi Bodhi, I could successfully update my GoFlex Net & my Pogo E02 with your uBoot and update to Debian Jessie and your latest 3.12.0 kernel. Thanks for your solutions! Everything works great except for the inherent weakness of the GoFlex and Pogoplug and that is the missing internal clock. I made some research today with Google and was surprised to see that the standard uBoot includes tby mkl - uBoot
Very interesting and I'm already considering to buy a Mele Ax00. What about publishing the image as a torrent at Linuxtracker? Klausby mkl - Allwinner A10
@Jeff: I've checked the uBoot environment which I found here: https://github.com/doozan/uBoot/blob/10af78d93e0d22afabae9087ca0e3f6539f5e25a/environment/uboot.environment.txt As far as I understand the following lines (posted by others in the forum) should be added/modified to enable booting from SATA drives: sata_boot=ide reset; mw 0x800000 0 1; ext2load ide 0:1 0x800000 /boot/uImage;by mkl - uBoot