Show all posts by user

Happy New Year! - 10 years ago

It's the Year of The Goat :) Happy New Year everybody! Peace to the world.

by bodhi - Off-Topic

Re: ZyXEL NSA320S Hacks - 10 years ago

Also see this thread: Debian Linux on Zyxel NSA320S (success) It might or might not be because you're booting with the NSA320 DTB. chrlee has a new DTS for NSA320S which I'm going to include in the next kernel release to see if it will be enough.

by bodhi - Debian

Re: ZyXEL NSA320S Hacks - 10 years ago

@jochar, > Issues: > No network (no light on the back of the unit, > switch does not detect the port, i have tested the > cable with the tester and tryed the port with a > pc, but no luck) > > Plase help to resolve this network issue Please post your dmesg output after booting and logged in as root with serial console.

by bodhi - Debian

Re: NSA 325 V2 Debian Is Possible! - 10 years ago

Addy, The kernel installation was successful. It has finished booting. The problem now is with the rootfs. To recover: - Download and put the 3.17 rootfs on a USB thumb drive. - Boot and interrupt serial console. - Temporarily change u-boot env for bootcmd to boot USB first. If not sure how, please list your u-boot envs in serial console here. Don't save your envs. After booting

by bodhi - Debian

Re: Before I dive in (greetz) - 10 years ago

LeggoMyEggo, > I am just saying it would be nice if the script > was updated to 1) to load the latest u-boot and > root-fs and 2) took into account the platform it > was being installed on and customized the > installation based on that. Agreed. I just need to find time to write and test it, since Jeff has stopped the maintenance for the script.

by bodhi - Debian

Re: Before I dive in (greetz) - 10 years ago

Joey, QuoteW: Failure trying to run: chroot > /tmp/debian mount -t proc proc /proc > W: See /tmp/debian/debootstrap/debootstrap.log for > details > debootstrap failed. > See /tmp/debian/debootstrap/debootstrap.log for > more information. > Pogoplug:/tmp$ When you've installed with Jeff's wheezy/squeeze script and got to this point, then: - u-boot vers

by bodhi - Debian

Re: Linux Kernel 3.18 (FDT) and 3.16 (non-FDT) Kirkwood package and rootfs - 10 years ago

@yhfudev, > > -CONFIG_TREE_PREEMPT_RCU=y > -CONFIG_RESOURCE_COUNTERS=y > -CONFIG_PM_RUNTIME=y > -CONFIG_BT_6LOWPAN=m # this one is missing even I > select in the menu > -CONFIG_IEEE802154_FAKEHARD=m > -CONFIG_IR_IMG_HW=y > -CONFIG_IR_IMG_NEC=y > -CONFIG_IR_IMG_JVC=y > -CONFIG_IR_IMG_SONY=y > -CONFIG_IR_IMG_SHARP=y > -CONFIG_IR_IMG_SANYO=y

by bodhi - Debian

Re: UART Booting HowTo for Selected Kirkwood Devices - 10 years ago

balbes150, It means that: - The Asus-NAS-M25 has UART booting capability, good news :) Now you can experimenting with flashing newer u-boot, knowing there is a rescue mechanism. - The Sheevaplug is the reference board, so it works with the ASUS. - To build newer u-boot for the ASUS, the Sheevaplug's u-boot can be used as a base. But changes might be needed to make it work correctly

by bodhi - uBoot

Re: Before I dive in (greetz) - 10 years ago

Joey, These are installation links that you might want to read (but not attempt right away, I'd expect you will have questions): 1. Jeff's script to install u-boot and Debian (the Debian rootfs part has problem, because it is out of date) http://projects.doozan.com/debian/ 2. To create latest version of Debian rootfs: http://forum.doozan.com/read.php?2,12096 3. To install

by bodhi - Debian

Re: Linux Kernel 3.18 (FDT) and 3.16 (non-FDT) Kirkwood package and rootfs - 10 years ago

yhfudev, Unfortunately, AUFS is not in the mainline Linux kernel. So I can't add it without patching. Also, there are some inpact to the current kernel with other config options above (will alter the behavior).

by bodhi - Debian

Re: Linux Kernel 3.18 (FDT) and 3.16 (non-FDT) Kirkwood package and rootfs - 10 years ago

@JanN, Try cat /etc/fw_env.config # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd1 0x0000 0x20000 0x20000

by bodhi - Debian

Re: Linux Kernel 3.18 (FDT) and 3.16 (non-FDT) Kirkwood package and rootfs - 10 years ago

balbes150 Wrote: ------------------------------------------------------- > U-Boot Asus-NAS-M25 Doesn't support booting from > SATA (HDD). > There is only support for USB and NAND. Ah, I've mixed up yours and Jan's :) then try that change "orion_nand" on USB.

by bodhi - Debian

Re: Linux Kernel 3.18 (FDT) and 3.16 (non-FDT) Kirkwood package and rootfs - 10 years ago

Yes, console=console=ttyS0,115200 mtdparts=orion_nand:0xc0000@0(uboot)ro,0x7f00000@0x100000(root) Your dmesg showed that the mtdparts did not get into the command line.

by bodhi - Debian

Re: 2013.10 U-Boot for Pogoplug V3 (OXNAS) - 10 years ago

@thebladerunner, You are running the new u-boot, but with the default envs from internal u-boot settings. You should have also flashed the default envs image (step 10) if you are going to run an FDT kernel/rootfs such as this rootfs. 10. Flash uboot environment to 0x00100000 (See caveat in step 2, do not flash this if the kernel is not FDT) So right now, to recover you can do either on

by bodhi - uBoot

Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug - 10 years ago

@laprjns, It's because codier has flashed new u-boot and new default envs images. The original settings for the old u-boot can be used as is with the new u-boot, but the new defaults envs can also be flashed to start anew. @codier, Replicate what you did for the 1st Dockstar. You can compare the the 1st Dockstar envs and the 2nd one. Recall you have to add the rescue envs setting b

by bodhi - uBoot

Re: Linux Kernel 3.18 (FDT) and 3.16 (non-FDT) Kirkwood package and rootfs - 10 years ago

balbes150, I think you should put the mtdparts definition in the kernel command line (looks like it is not currently). See if it will appear. [ 0.000000] Kernel command line: console=ttyS0,115200n8 user_debug=31 :::DB88FXX81:eth0:none

by bodhi - Debian

Re: Linux Kernel 3.18 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) - 10 years ago

LeggoMyEggo, > Edit 3 hour later: Just loaded 3.18 over my 3.17 > disk. Boots fine but stock Realtek wifi does not > respond to modprobe rt3390sta.ko or rt3390sta. > Also tried modprobe rt2800pci. rt3390sta does not > show up in lsmod. What was the error when you did modprobe? Look for the module see if you can find it: find /lib/modules/ -name '*3390*�

by bodhi - Debian

Re: Best approach to automount usb drive? - 10 years ago

rkrug, - Simple approach: use usbmount (install the usbmount package). - More complicated approach (and more flexible and powerful): use udev rules. Also be aware that if you use a remote dekstop (xfce, lxde,...) then the automounting behavior is potentially different when you are in desktop.

by bodhi - Debian

Re: Support for a multi boot? - 10 years ago

habibie, > I will give it a try to see how it goes. The only > problem I can think of right now is do I have to > make any necessary changes to the u-boot > environments when migrating to GPT? What I tried > to say is if GPT still uses the /dev/sdXn, where X > can be a, b, c, etc. and n starts from 1 to 128? With the new u-boot, I am not aware there is any difference

by bodhi - uBoot

Re: Overprovisioning A Flash Drive ? - 10 years ago

I've heard that in Debian Sid, initramfs can do fsck.f2f2 mounted drives (I have not verified this). And there are a few bug fixes came in for 3.19, and more bug fixes for 3.20. So don't use it for your data drives yet. Also, using it for rootfs on remote administering devices seems unfeasible. Unless you have a rescue system installed in NAND.

by bodhi - Debian

Re: 2013.10 U-Boot for Pogoplug V3 (OXNAS) - 10 years ago

@Robert, QuoteIt will write UBOOT to Sata disk on the beginning (in the first 2048 sector) on the disk (not on rootfs.) (??) Should be: QuoteIt will write U-Boot SPL to Sata disk on the beginning (in the first 2048 sector) on the disk.

by bodhi - uBoot

Re: Support for a multi boot? - 10 years ago

habibie, > IIRC, this was flashed somewhere in 8/2014 by a > friend. I believe she just followed the > instructions on the ArchLinux ARM site and the > procedure automatically upgraded the u-boot. This is the later version. > Right > now, I don't even know if the original PogoPlug OS > on the NAND space is still there or not. However, > if I take out t

by bodhi - uBoot

Re: Linux Kernel 3.18 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) - 10 years ago

dump, When you install kernel with dpkg, initramfs-3.18.5-oxnas-tld-1 will be generated automatically.

by bodhi - Debian

Re: Linux Kernel 3.18 (FDT) and 3.16 (non-FDT) Kirkwood package and rootfs - 10 years ago

@Jan, > What did you guess, and: were you right? Yes, there must have been a subtle change in 3.18 that seems to affect stock u-boot only. In the following bootargs, try changing it as followed (the bold part). And please do this in serial console only (don't save). bootargs_sata1linux=console=ttyS0,115200 mtdparts=orion_nand:0x100000(uboot),0x80000(uboot_env),0x80000(key_s

by bodhi - Debian

Re: Linux Kernel 3.18 (FDT) and 3.16 (non-FDT) Kirkwood package and rootfs - 10 years ago

balbes150 Wrote: ------------------------------------------------------- > bodhi Wrote: > -------------------------------------------------- > ----- > > > Looking at the dmesg log, is this the ASUS-M25 > > boot log or something else? > > > > Marvell DB-88F6281-BP Development Board > > > > > Yes. Out console Asus-NAS-M25. > f

by bodhi - Debian

Re: Support for a multi boot? - 10 years ago

habibie Wrote: ------------------------------------------------------- > Hello Bodhi, > > Thank you for your suggestion on GPT. Is this GPT > the same as the gdisk on a debian Wheezy > (v7.1.xx)? > > Currently, I have a 1TB SATA HDD on a Seagate > GoFLEX Home flashed with ArchLinux ARM (including > the uboot from ArchLinux ARM). If I format my 1TB > SATA

by bodhi - uBoot

Re: Linux Kernel 3.18 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) - 10 years ago

LeggoMyEggo, This update includes the config CONFIG_CFG80211_WEXT, that was omitted. A few people have reported this particular config missing that cause problem with the supplicant . I suspect that the problem also has something to do with the updated Realtek drivers in kernel 3.17+. Please try. I don't have the wifi card installed in my Pogo Pro currently so can't test it. If

by bodhi - Debian

Re: Linux Kernel 3.18 (FDT) and 3.16 (non-FDT) Kirkwood package and rootfs - 10 years ago

balbes150, > To make changes in U-Boot, you can use the system > with non-FDT kernel (3.16 =<) and then move on FDT > ? > This is possible ? > See if I understood your question: you want to have newer u-boot (e.g. 2014 or 2015) that can boot with non-FDT 3.16 and FDT 3.17+ kernel? The answer is: u-boot that has FDT support can be used for booting both non-FDT and

by bodhi - Debian

Re: Linux Kernel 3.18 Pogo V3 (Oxnas OX820) package and rootfs (Flattened Device Tree) - 10 years ago

Kernel linux-3.18.5-oxnas-tld-1 package was uploaded. Please see 1st post for download link. The following features are new in this version: - Added various kernel configuration that are newly available in 3.18, and also various kernel configuration per forum users requests: loop device, stock wifi supports, encrypted fs.

by bodhi - Debian

Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug - 10 years ago

codier, scanning usb for storage devices... 0 Storage Device(s) found This means your USB was not detected. Try plug it in the port in the back, right next to the Ethernet port. Power up. OTOH, if you intended to boot rescue system without the USB attached, then your envs are not set up for that.

by bodhi - uBoot