radsfaninlv, A couple things to try: 1. Your uBoot envs look good, except that the machid is still set to dd6, while arcNumber is 2097. Without USB attached, try setting it again to 831 in serial console: > setenv machid 831 > boot see if it will boot into rescue system. 2. Download the latest rootfs (link in my signature) and put it on a USB thumb drive. In serial console, setby bodhi - Rescue System
Rootfs Debian-3.13.1-kirkwood-tld-2 was uploaded. Please see 1st post for download link.by bodhi - Debian
Earl, No need to have this file. Only when you need to have special rules for apt-get, e.g. to install different package version from different sources.by bodhi - Debian
You should create new thread in Debian section for this. It is very strange that the ping is 192.168.0.1 and your router is 192.168.1.1. In the new thread post the output of fw_printenv cat /etc/network/interfaces dmesgby bodhi - uBoot
dinjo Wrote: ------------------------------------------------------- > Did you tried with rtorrent and looked at the > rtorrent logs libtorrent would better some better > info on it. I've confirmed what optim said above. Download is fine but no upload at all.by bodhi - Off-Topic
Thanks Warhead.by bodhi - Off-Topic
gray, > Not sure about the GoFlex Home. From my quick > googling, doesn't look like the header pin matches > the white connector side. The CD ROM audio cable white connector does fit the GoFlex Home header perfectly. If you happen to have a GoFlex Home with the header installed (some does not).by bodhi - Off-Topic
:) I guess you probably had some typos when setting uBoot envs. If you have saved the log of what you did in ssh session, then post it here and I'll see if I can spot something wrong. If all fails, then the only way to unbrick is to install serial console, the recommended hw parts are in this thread: http://forum.doozan.com/read.php?8,13263 And there are many tutorials about connectinby bodhi - Debian
GothPanda Wrote: ------------------------------------------------------- > Bodhi, > > That worked! Had to untar the tarball as root to > avoid some errors, but it's booting, and I can ssh > into the box. > > Thanks again for the help! :D Cool! I'll update the instruction to make it a little more clear.by bodhi - Debian
syong Wrote: ------------------------------------------------------- > @bodhi, > > If it is too lose, you might want to put some > solder on the pin to make it fit. > > But to my opinion, it is best to put a phone jack > on your device. I just fix one on each of my > embedded device for easy serial connection. The > motivation came from here: > > htby bodhi - Off-Topic
Kernel 3.13.1-kirkwood-tld-2 package was uploaded. Please see 1st post for download link.by bodhi - Debian
Download the latest rootfs in this post. And follow the instruction to put it on a USB thumb drive, boot with that. http://forum.doozan.com/read.php?2,12096by bodhi - Debian
Freebird, Your uBoot installation was QuoteU-Boot 2010.09 (Feb 16 2011 - 18:44:23) UBIT v0.6 uBoot envs were setup quite differently from the standard uBoot installaton running Jeff's script. Basically the problem is in the bootargs. Stop serial console at the count down. At the prompt, you can set this uBoot env temporarily setenv boot_auto 'setenv rd_args rootfstypby bodhi - uBoot
Problem with 3.13.1 NFS rootfs above solved! I've rebuilt with mvmdio and mv643xx_eth modules included in the kernel directly (previously loaded by initrd), and no longer see the error, the kernel is now booting with NFS rootfs. Will upload newer version shortly.by bodhi - Debian
freebird, > Is there a way to get the rootfs to a USB stick > directly (rather than via deb files) or flash the > updated uBoot from within the current uBoot > environment? Yes for both. The installation for the rootfs can be done using any Linux box. If the only one available is this GoFlex Home, then you can use a Linux Live CD on a PC or Mac. The latest rootfs and insby bodhi - uBoot
Freebird, Your uBoot is too old. It won't work with that rootfs. You can either: - update uBoot Or - use a different rootfs You can find both in the links in my signature. But I would try the rootfs first.by bodhi - uBoot
Please see this post if you're using NFS rootfs. The problem was solved.by bodhi - Debian
Heads up!!! Kernel 3.13 seems to have problem with booting NFS root. As I can tell from serial console, it seems that initrd probed modules mvmdio and mv643xx_eth in wrong order. kernel 3.12.0-kirkwood-tld-5 [ 2.556718] udevd[62]: starting version 175 [ 2.650231] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 2.736122] usb 1-1: new high-speed USB device numbby bodhi - Debian
S Sharma, Cool! Glad it works well upgrading from squeeze…. Are you running old uBoot? if not sure, run this command grep -a --null-data U-Boot /dev/mtd0ro Note: don't be alarmed if seeing NAND error messages in dmesg when running this command! (the error was because mtd0 is not a normal partition).by bodhi - Debian
radsfaninlv, You do need a serial cable, if netconsole was not set up. Boot with serial console and look at uBoot envs, you might have typos in one of those uBoot envs, if you have been changing them. If you can't spot the error, post the output of uBoot command printenv.by bodhi - Rescue System
kiryl, Don't connect 3.3V, should connect only TX, RX, and GND.by bodhi - uBoot
Earl, apt-get update is successful, then the sources are OK. Did it happen after you upgraded the kernel? if yes then I would backup the rootfs first, and then do apt-get upgrade. Try install again after that.by bodhi - Debian
Kernel 3.13.1-kirkwood-tld-1 package was uploaded. Please see first post for download link.by bodhi - Debian
@milhouse31, I've ran the same dd test on the GoFlex Net USB thumb drive root@HomeMBP:/localdisk# dd if=/dev/zero of=./test count=50000 50000+0 records in 50000+0 records out 25600000 bytes (26 MB) copied, 1.51012 s, 17.0 MB/s No disk write slow down problem in 3.12.x or 3.13.1.by bodhi - Debian
Heychris, > Personally I've attempted many times, but am just > not quite finding the problem. I've also uart > restored dozens of times. So UART booting does work on the Netgear Stora? That would make upgrading uBoot much easier. What was the problem you've seen while booting your new uBoot? and what uBoot version did you build?by bodhi - uBoot
Atesz, See first post of this thread for how to download the latest rootfs (3.12.0-kirkwood-tld-3, updated 14 Dec 2013), and installation to a USB pen drive.by bodhi - Debian
Atesz Wrote: ------------------------------------------------------- > Hi. > > Can I try this debian linux without install? So > only run from USB pendrive? I will not touch > original firmware and data in HDD. Can you help > for me? May be. Which plug do you have? are you running stock FW and OS?by bodhi - Debian
nekitip, QuoteI hope you are making patch already with this new data. No :) I meant to say the config file indicated that the IDE LED triggers are already in place. I've done all I can there. The tld-3 patch version works for NSA320 and NSA325. So for NSA310, I don't know why it did not work for you! because I don't have the NSA310 so I can't really say with certainty wheby bodhi - Debian
kiryl Wrote: ------------------------------------------------------- > Hi, > > I know there are patches available for compiling > version 1.1.5 => > u-boot-marvell-ms2110 <= but the > final compiled u-boot.kwb file seems to be too > small, something about 150KiB, while the original > is much bigger (or maybe it is just a mtd0 > backup), something aboutby bodhi - uBoot
Earl, 1. To turn the status LED to green for normal operation, put these statement in your /etc/rc.local (before the exit 0): # turn on LED if [ -d /sys/class/leds/status:green:health ]; then echo default-on > /sys/class/leds/status:green:health/trigger if [ -d /sys/class/leds/status:orange:fault ]; then echo none > /sys/class/leds/status:orange:fault/trigger fi fby bodhi - uBoot