If you need any more tests, please tell me. Thank you for your time. All my Kirkwood boxes and OX820 boxes say thank you!by daviddyer - uBoot
So I guess the problem is simple: 1 uboot network is alive. 2 for some reason, the netconsole does NOT start at the beginning. 3 net console can work if we start it manually. :Pby daviddyer - uBoot
I normally don't run commands in uboot. For debug purpose only, I put something in bootcmd environment value in uboot root@PogoPro:~# fw_printenv bootcmd bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset root@PogoPro:~# fw_setenv bootcmd 'run start_netconsole; run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset' root@Pby daviddyer - uBoot
Serial console, stop uboot, run ping / printenv / boot command under OX820> prompt result: 1 ping is alive 2 printenv info attached. 3 boot ok. 4 NO netconsole output. This is the output from serial console. There's no output from net console. U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 :by daviddyer - uBoot
I will run the tests you asked. I made a little change. The original 192.168.7.4 was a Windows XP machine without monitor, my putty for ssh / serial console is running on another Windows 7 machine. Now I changed the netcat server to one of my Kirkwood box (Machine name BackUpServer, IP 192.168.7.17) and run three putty from the Windows 7 machine. One putty for SSH to Dockstar (net console) whichby daviddyer - uBoot
Hi, Bodhi, I just registered an account here. First, I'd like to say I'm terribly sorry---- I made a very low level mistake.... I inserted the wrong network cable, a non-connected cable to the PogoPro after I opened the box and connected the cables... so please delete these posts---these posts are giving misleading info. http://forum.doozan.com/read.php?3,32079,32088#msg-3208by daviddyer - uBoot