Welcome! Log In Create A New Profile

Advanced

Problem installing Netgear Stora

Posted by Erik 
Problem installing Netgear Stora
March 18, 2017 04:30AM
Hi Bodhi,

I have started with the instructions of installing new uboot.
- First i did unpack the env-tools - did look if kernel did support it
Did see this:
Updated 05 Sept 2015:

Kernel linux-4.2.0-kirkwood-tld-1 package has been uploaded. The following features were updated/added:

1. Incorprate patched nsa3xx-hwmon module for NSA320 and NSA310 (some variant of). This patch allows these boxes to use the nsa3xx-hwmon like before (Device Tree transition in kernel 3.17 has broken this module). It also streams line the way NSA3xx hwmon is implemented in the kernel.
2. New Marvell CESA crypto driver is activated in this kernel.
3. Netgear Stora DTS was modified to correct NAND chip deday and enable write access to mtd0 (u-boot and u-boot envs).

So i think fw_tools are supported with kernel 4.4.0 and higher.
Question: Does kernel 4.4.0 support envir-tools?

I ask this question becaus i get:

root@debian:~# fw_printenv ethaddr
[  314.738491] __nand_correct_data: uncorrectable ECC error
...
[  317.216841] __nand_correct_data: uncorrectable ECC error
Warning: Bad CRC, using default environment
## Error: "ethaddr" not defined
root@debian:~#

And i don know if its important; the name of mtd0 is not u-boot, but orion_nand:
root@debian:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 10000000 00020000 "orion_nand"



Edited 1 time(s). Last edit at 03/18/2017 04:56AM by bodhi.
Attachments:
open | download - putty.log (49.5 KB)
Re: Problem installing Netgear Stora
March 18, 2017 04:59AM
> So i think fw_tools are supported with kernel 4.4.
> 0 and higher.
> Question: Does kernel 4.4.0 support envir-tools?

Yes it does.

If you are not sure how to get through some error while instalingl u-boot, post the the entire log of what you did, and I will point out where the error is.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: Problem installing Netgear Stora
March 18, 2017 05:24AM
Hi Bodhi,

In the topic i added the putty.log, in which the commands and output is saved.

The only thing before i did, was:
download linux-tools-installation-bodhi.tar.gz
sha256sum

in /root:

tar xzvf linux-tools-installation-bodhi.tar.gz
cd tools
ln -s fw_printenv fw_setenv
cp -a fw_env.config /etc/

and cp -a the rest to /usr/sbin
cp -a busybox /usr/sbin
cp -a e2fsck /usr/sbin
cp -a nanddump /usr/sbin
cp -a fw_printenv /usr/sbin
cp -a flash_erase /usr/sbin
cp -a nandwrite /usr/sbin

thats all.

Then i started following this manual: 2016.05 U-Boot Kirkwood - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug, NSA325, NSA320, NSA310S, NSA320S, NSA310, HP T5325

here are the steps i did with the output (in the putty logfile on the previous post is the compleet output from startup)

root@debian:~# cat /etc/fw_env.config
# Configuration file for fw_(printenv/saveenv) utility.
# Up to two entries are valid, in this case the redundant
# environment sector is assumed present.
# Notice, that the "Number of sectors" is ignored on NOR.

# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
/dev/mtd0		0xc0000		0x20000		0x20000
root@debian:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 10000000 00020000 "orion_nand"
root@debian:~# fw_printenv ethaddr
[  314.738491] __nand_correct_data: uncorrectable ECC error
[  314.743919] __nand_correct_data: uncorrectable ECC error
[  314.749292] __nand_correct_data: uncorrectable ECC error
[  314.755149] __nand_correct_data: uncorrectable ECC error
[  314.760526] __nand_correct_data: uncorrectable ECC error
[  314.766200] __nand_correct_data: uncorrectable ECC error
[  314.771556] __nand_correct_data: uncorrectable ECC error
[  314.777618] __nand_correct_data: uncorrectable ECC error
[  314.782954] __nand_correct_data: uncorrectable ECC error
[  314.788596] __nand_correct_data: uncorrectable ECC error
[  314.793960] __nand_correct_data: uncorrectable ECC error
[  314.799296] __nand_correct_data: uncorrectable ECC error
[  314.805005] __nand_correct_data: uncorrectable ECC error
[  314.810344] __nand_correct_data: uncorrectable ECC error
[  314.816394] __nand_correct_data: uncorrectable ECC error
[  314.821732] __nand_correct_data: uncorrectable ECC error
[  314.827368] __nand_correct_data: uncorrectable ECC error
[  314.832703] __nand_correct_data: uncorrectable ECC error
[  314.838335] __nand_correct_data: uncorrectable ECC error
[  314.843671] __nand_correct_data: uncorrectable ECC error
[  314.849304] __nand_correct_data: uncorrectable ECC error
[  314.855087] __nand_correct_data: uncorrectable ECC error
[  314.860423] __nand_correct_data: uncorrectable ECC error
[  314.866127] __nand_correct_data: uncorrectable ECC error
[  314.871463] __nand_correct_data: uncorrectable ECC error
[  314.877095] __nand_correct_data: uncorrectable ECC error
[  314.882432] __nand_correct_data: uncorrectable ECC error
[  314.888064] __nand_correct_data: uncorrectable ECC error
[  314.894036] __nand_correct_data: uncorrectable ECC error
[  314.899375] __nand_correct_data: uncorrectable ECC error
[  314.905016] __nand_correct_data: uncorrectable ECC error
[  314.910354] __nand_correct_data: uncorrectable ECC error
[  314.915987] __nand_correct_data: uncorrectable ECC error
[  314.921323] __nand_correct_data: uncorrectable ECC error
[  314.926955] __nand_correct_data: uncorrectable ECC error
[  314.932712] __nand_correct_data: uncorrectable ECC error
[  314.938451] __nand_correct_data: uncorrectable ECC error
[  314.943890] __nand_correct_data: uncorrectable ECC error
[  314.949317] __nand_correct_data: uncorrectable ECC error
[  314.955081] __nand_correct_data: uncorrectable ECC error
[  314.960425] __nand_correct_data: uncorrectable ECC error
[  314.966086] __nand_correct_data: uncorrectable ECC error
[  314.971847] __nand_correct_data: uncorrectable ECC error
[  314.977496] __nand_correct_data: uncorrectable ECC error
[  314.982850] __nand_correct_data: uncorrectable ECC error
[  314.988480] __nand_correct_data: uncorrectable ECC error
[  314.993850] __nand_correct_data: uncorrectable ECC error
[  314.999184] __nand_correct_data: uncorrectable ECC error
[  315.004890] __nand_correct_data: uncorrectable ECC error
[  315.010652] __nand_correct_data: uncorrectable ECC error
[  315.016288] __nand_correct_data: uncorrectable ECC error
[  315.021630] __nand_correct_data: uncorrectable ECC error
[  315.027264] __nand_correct_data: uncorrectable ECC error
[  315.032599] __nand_correct_data: uncorrectable ECC error
[  315.038230] __nand_correct_data: uncorrectable ECC error
[  315.043583] __nand_correct_data: uncorrectable ECC error
[  315.049625] __nand_correct_data: uncorrectable ECC error
[  315.054994] __nand_correct_data: uncorrectable ECC error
[  315.060329] __nand_correct_data: uncorrectable ECC error
[  315.066031] __nand_correct_data: uncorrectable ECC error
[  315.071368] __nand_correct_data: uncorrectable ECC error
[  315.076999] __nand_correct_data: uncorrectable ECC error
[  315.082339] __nand_correct_data: uncorrectable ECC error
[  315.088397] __nand_correct_data: uncorrectable ECC error
[  315.093735] __nand_correct_data: uncorrectable ECC error
[  315.099368] __nand_correct_data: uncorrectable ECC error
[  315.104732] __nand_correct_data: uncorrectable ECC error
[  315.110068] __nand_correct_data: uncorrectable ECC error
[  315.115774] __nand_correct_data: uncorrectable ECC error
[  315.121116] __nand_correct_data: uncorrectable ECC error
[  315.127167] __nand_correct_data: uncorrectable ECC error
[  315.132504] __nand_correct_data: uncorrectable ECC error
[  315.138141] __nand_correct_data: uncorrectable ECC error
[  315.143483] __nand_correct_data: uncorrectable ECC error
[  315.149115] __nand_correct_data: uncorrectable ECC error
[  315.154484] __nand_correct_data: uncorrectable ECC error
[  315.159824] __nand_correct_data: uncorrectable ECC error
[  315.165952] __nand_correct_data: uncorrectable ECC error
[  315.171292] __nand_correct_data: uncorrectable ECC error
[  315.176925] __nand_correct_data: uncorrectable ECC error
[  315.182261] __nand_correct_data: uncorrectable ECC error
[  315.187893] __nand_correct_data: uncorrectable ECC error
[  315.193231] __nand_correct_data: uncorrectable ECC error
[  315.198920] __nand_correct_data: uncorrectable ECC error
[  315.204814] __nand_correct_data: uncorrectable ECC error
[  315.210156] __nand_correct_data: uncorrectable ECC error
[  315.215866] __nand_correct_data: uncorrectable ECC error
[  315.221205] __nand_correct_data: uncorrectable ECC error
[  315.226841] __nand_correct_data: uncorrectable ECC error
[  315.232182] __nand_correct_data: uncorrectable ECC error
[  315.237815] __nand_correct_data: uncorrectable ECC error
[  315.243570] __nand_correct_data: uncorrectable ECC error
[  315.249208] __nand_correct_data: uncorrectable ECC error
[  315.254575] __nand_correct_data: uncorrectable ECC error
[  315.259912] __nand_correct_data: uncorrectable ECC error
[  315.265614] __nand_correct_data: uncorrectable ECC error
[  315.270952] __nand_correct_data: uncorrectable ECC error
[  315.276583] __nand_correct_data: uncorrectable ECC error
[  315.282340] __nand_correct_data: uncorrectable ECC error
[  315.287977] __nand_correct_data: uncorrectable ECC error
[  315.293318] __nand_correct_data: uncorrectable ECC error
[  315.298951] __nand_correct_data: uncorrectable ECC error
[  315.304315] __nand_correct_data: uncorrectable ECC error
[  315.309651] __nand_correct_data: uncorrectable ECC error
[  315.315357] __nand_correct_data: uncorrectable ECC error
[  315.321118] __nand_correct_data: uncorrectable ECC error
[  315.326751] __nand_correct_data: uncorrectable ECC error
[  315.332088] __nand_correct_data: uncorrectable ECC error
[  315.337722] __nand_correct_data: uncorrectable ECC error
[  315.343058] __nand_correct_data: uncorrectable ECC error
[  315.348690] __nand_correct_data: uncorrectable ECC error
[  315.354053] __nand_correct_data: uncorrectable ECC error
[  315.359808] __nand_correct_data: uncorrectable ECC error
[  315.365517] __nand_correct_data: uncorrectable ECC error
[  315.370857] __nand_correct_data: uncorrectable ECC error
[  315.376489] __nand_correct_data: uncorrectable ECC error
[  315.381826] __nand_correct_data: uncorrectable ECC error
[  315.387457] __nand_correct_data: uncorrectable ECC error
[  315.392797] __nand_correct_data: uncorrectable ECC error
[  315.398859] __nand_correct_data: uncorrectable ECC error
[  315.404229] __nand_correct_data: uncorrectable ECC error
[  315.409565] __nand_correct_data: uncorrectable ECC error
[  315.415268] __nand_correct_data: uncorrectable ECC error
[  315.420605] __nand_correct_data: uncorrectable ECC error
[  315.426243] __nand_correct_data: uncorrectable ECC error
[  315.431583] __nand_correct_data: uncorrectable ECC error
[  315.437632] __nand_correct_data: uncorrectable ECC error
[  315.442972] __nand_correct_data: uncorrectable ECC error
[  315.448718] __nand_correct_data: uncorrectable ECC error
[  315.454085] __nand_correct_data: uncorrectable ECC error
[  315.459417] __nand_correct_data: uncorrectable ECC error
[  315.465131] __nand_correct_data: uncorrectable ECC error
[  315.470475] __nand_correct_data: uncorrectable ECC error
[  315.476531] __nand_correct_data: uncorrectable ECC error
[  315.481871] __nand_correct_data: uncorrectable ECC error
[  315.487509] __nand_correct_data: uncorrectable ECC error
[  315.492850] __nand_correct_data: uncorrectable ECC error
[  315.498482] __nand_correct_data: uncorrectable ECC error
[  315.503846] __nand_correct_data: uncorrectable ECC error
[  315.509182] __nand_correct_data: uncorrectable ECC error
[  315.515307] __nand_correct_data: uncorrectable ECC error
[  315.520649] __nand_correct_data: uncorrectable ECC error
[  315.526282] __nand_correct_data: uncorrectable ECC error
[  315.531619] __nand_correct_data: uncorrectable ECC error
[  315.537253] __nand_correct_data: uncorrectable ECC error
[  315.542589] __nand_correct_data: uncorrectable ECC error
[  315.548219] __nand_correct_data: uncorrectable ECC error
[  315.554191] __nand_correct_data: uncorrectable ECC error
[  315.559532] __nand_correct_data: uncorrectable ECC error
[  315.565164] __nand_correct_data: uncorrectable ECC error
[  315.570502] __nand_correct_data: uncorrectable ECC error
[  315.576133] __nand_correct_data: uncorrectable ECC error
[  315.581471] __nand_correct_data: uncorrectable ECC error
[  315.587103] __nand_correct_data: uncorrectable ECC error
[  315.592860] __nand_correct_data: uncorrectable ECC error
[  315.598493] __nand_correct_data: uncorrectable ECC error
[  315.603856] __nand_correct_data: uncorrectable ECC error
[  315.609192] __nand_correct_data: uncorrectable ECC error
[  315.614894] __nand_correct_data: uncorrectable ECC error
[  315.620232] __nand_correct_data: uncorrectable ECC error
[  315.625864] __nand_correct_data: uncorrectable ECC error
[  315.631620] __nand_correct_data: uncorrectable ECC error
[  315.637254] __nand_correct_data: uncorrectable ECC error
[  315.642590] __nand_correct_data: uncorrectable ECC error
[  315.648223] __nand_correct_data: uncorrectable ECC error
[  315.653559] __nand_correct_data: uncorrectable ECC error
[  315.659190] __nand_correct_data: uncorrectable ECC error
[  315.664556] __nand_correct_data: uncorrectable ECC error
[  315.670309] __nand_correct_data: uncorrectable ECC error
[  315.676020] __nand_correct_data: uncorrectable ECC error
[  315.681359] __nand_correct_data: uncorrectable ECC error
[  315.686991] __nand_correct_data: uncorrectable ECC error
[  315.692328] __nand_correct_data: uncorrectable ECC error
[  315.697960] __nand_correct_data: uncorrectable ECC error
[  315.703298] __nand_correct_data: uncorrectable ECC error
[  315.709349] __nand_correct_data: uncorrectable ECC error
[  315.714714] __nand_correct_data: uncorrectable ECC error
[  315.720049] __nand_correct_data: uncorrectable ECC error
[  315.725752] __nand_correct_data: uncorrectable ECC error
[  315.731089] __nand_correct_data: uncorrectable ECC error
[  315.736723] __nand_correct_data: uncorrectable ECC error
[  315.742058] __nand_correct_data: uncorrectable ECC error
[  315.748107] __nand_correct_data: uncorrectable ECC error
[  315.753447] __nand_correct_data: uncorrectable ECC error
[  315.759081] __nand_correct_data: uncorrectable ECC error
[  315.764443] __nand_correct_data: uncorrectable ECC error
[  315.769779] __nand_correct_data: uncorrectable ECC error
[  315.775479] __nand_correct_data: uncorrectable ECC error
[  315.780820] __nand_correct_data: uncorrectable ECC error
[  315.786868] __nand_correct_data: uncorrectable ECC error
[  315.792208] __nand_correct_data: uncorrectable ECC error
[  315.797841] __nand_correct_data: uncorrectable ECC error
[  315.803177] __nand_correct_data: uncorrectable ECC error
[  315.808809] __nand_correct_data: uncorrectable ECC error
[  315.814174] __nand_correct_data: uncorrectable ECC error
[  315.819510] __nand_correct_data: uncorrectable ECC error
[  315.825635] __nand_correct_data: uncorrectable ECC error
[  315.830977] __nand_correct_data: uncorrectable ECC error
[  315.836608] __nand_correct_data: uncorrectable ECC error
[  315.841946] __nand_correct_data: uncorrectable ECC error
[  315.847579] __nand_correct_data: uncorrectable ECC error
[  315.852916] __nand_correct_data: uncorrectable ECC error
[  315.858547] __nand_correct_data: uncorrectable ECC error
[  315.864331] __nand_correct_data: uncorrectable ECC error
[  315.869667] __nand_correct_data: uncorrectable ECC error
[  315.875377] __nand_correct_data: uncorrectable ECC error
[  315.880715] __nand_correct_data: uncorrectable ECC error
[  315.886350] __nand_correct_data: uncorrectable ECC error
[  315.891685] __nand_correct_data: uncorrectable ECC error
[  315.897316] __nand_correct_data: uncorrectable ECC error
[  315.903074] __nand_correct_data: uncorrectable ECC error
[  315.908709] __nand_correct_data: uncorrectable ECC error
[  315.914071] __nand_correct_data: uncorrectable ECC error
[  315.919405] __nand_correct_data: uncorrectable ECC error
[  315.925106] __nand_correct_data: uncorrectable ECC error
[  315.930445] __nand_correct_data: uncorrectable ECC error
[  315.936079] __nand_correct_data: uncorrectable ECC error
[  315.941834] __nand_correct_data: uncorrectable ECC error
[  315.947468] __nand_correct_data: uncorrectable ECC error
[  315.952804] __nand_correct_data: uncorrectable ECC error
[  315.958438] __nand_correct_data: uncorrectable ECC error
[  315.963773] __nand_correct_data: uncorrectable ECC error
[  315.969403] __nand_correct_data: uncorrectable ECC error
[  315.974770] __nand_correct_data: uncorrectable ECC error
[  315.980524] __nand_correct_data: uncorrectable ECC error
[  315.986233] __nand_correct_data: uncorrectable ECC error
[  315.991572] __nand_correct_data: uncorrectable ECC error
[  315.997206] __nand_correct_data: uncorrectable ECC error
[  316.002543] __nand_correct_data: uncorrectable ECC error
[  316.008316] __nand_correct_data: uncorrectable ECC error
[  316.013661] __nand_correct_data: uncorrectable ECC error
[  316.019726] __nand_correct_data: uncorrectable ECC error
[  316.025095] __nand_correct_data: uncorrectable ECC error
[  316.030428] __nand_correct_data: uncorrectable ECC error
[  316.036139] __nand_correct_data: uncorrectable ECC error
[  316.041477] __nand_correct_data: uncorrectable ECC error
[  316.047111] __nand_correct_data: uncorrectable ECC error
[  316.052446] __nand_correct_data: uncorrectable ECC error
[  316.058496] __nand_correct_data: uncorrectable ECC error
[  316.063863] __nand_correct_data: uncorrectable ECC error
[  316.069197] __nand_correct_data: uncorrectable ECC error
[  316.074908] __nand_correct_data: uncorrectable ECC error
[  316.080246] __nand_correct_data: uncorrectable ECC error
[  316.085879] __nand_correct_data: uncorrectable ECC error
[  316.091216] __nand_correct_data: uncorrectable ECC error
[  316.097289] __nand_correct_data: uncorrectable ECC error
[  316.102631] __nand_correct_data: uncorrectable ECC error
[  316.108267] __nand_correct_data: uncorrectable ECC error
[  316.113608] __nand_correct_data: uncorrectable ECC error
[  316.119241] __nand_correct_data: uncorrectable ECC error
[  316.124605] __nand_correct_data: uncorrectable ECC error
[  316.129942] __nand_correct_data: uncorrectable ECC error
[  316.136066] __nand_correct_data: uncorrectable ECC error
[  316.141408] __nand_correct_data: uncorrectable ECC error
[  316.147042] __nand_correct_data: uncorrectable ECC error
[  316.152378] __nand_correct_data: uncorrectable ECC error
[  316.158012] __nand_correct_data: uncorrectable ECC error
[  316.163348] __nand_correct_data: uncorrectable ECC error
[  316.168978] __nand_correct_data: uncorrectable ECC error
[  316.174763] __nand_correct_data: uncorrectable ECC error
[  316.180098] __nand_correct_data: uncorrectable ECC error
[  316.185808] __nand_correct_data: uncorrectable ECC error
[  316.191147] __nand_correct_data: uncorrectable ECC error
[  316.196779] __nand_correct_data: uncorrectable ECC error
[  316.202117] __nand_correct_data: uncorrectable ECC error
[  316.207797] __nand_correct_data: uncorrectable ECC error
[  316.213668] __nand_correct_data: uncorrectable ECC error
[  316.219308] __nand_correct_data: uncorrectable ECC error
[  316.224676] __nand_correct_data: uncorrectable ECC error
[  316.230013] __nand_correct_data: uncorrectable ECC error
[  316.235713] __nand_correct_data: uncorrectable ECC error
[  316.241052] __nand_correct_data: uncorrectable ECC error
[  316.246683] __nand_correct_data: uncorrectable ECC error
[  316.252441] __nand_correct_data: uncorrectable ECC error
[  316.258075] __nand_correct_data: uncorrectable ECC error
[  316.263410] __nand_correct_data: uncorrectable ECC error
[  316.269043] __nand_correct_data: uncorrectable ECC error
[  316.274406] __nand_correct_data: uncorrectable ECC error
[  316.279742] __nand_correct_data: uncorrectable ECC error
[  316.285444] __nand_correct_data: uncorrectable ECC error
[  316.291200] __nand_correct_data: uncorrectable ECC error
[  316.296835] __nand_correct_data: uncorrectable ECC error
[  316.302170] __nand_correct_data: uncorrectable ECC error
[  316.307803] __nand_correct_data: uncorrectable ECC error
[  316.313140] __nand_correct_data: uncorrectable ECC error
[  316.318771] __nand_correct_data: uncorrectable ECC error
[  316.324136] __nand_correct_data: uncorrectable ECC error
[  316.329891] __nand_correct_data: uncorrectable ECC error
[  316.335600] __nand_correct_data: uncorrectable ECC error
[  316.340940] __nand_correct_data: uncorrectable ECC error
[  316.346577] __nand_correct_data: uncorrectable ECC error
[  316.351918] __nand_correct_data: uncorrectable ECC error
[  316.357550] __nand_correct_data: uncorrectable ECC error
[  316.362887] __nand_correct_data: uncorrectable ECC error
[  316.368936] __nand_correct_data: uncorrectable ECC error
[  316.374304] __nand_correct_data: uncorrectable ECC error
[  316.379638] __nand_correct_data: uncorrectable ECC error
[  316.385347] __nand_correct_data: uncorrectable ECC error
[  316.390687] __nand_correct_data: uncorrectable ECC error
[  316.396320] __nand_correct_data: uncorrectable ECC error
[  316.401656] __nand_correct_data: uncorrectable ECC error
[  316.407708] __nand_correct_data: uncorrectable ECC error
[  316.413046] __nand_correct_data: uncorrectable ECC error
[  316.418685] __nand_correct_data: uncorrectable ECC error
[  316.424051] __nand_correct_data: uncorrectable ECC error
[  316.429386] __nand_correct_data: uncorrectable ECC error
[  316.435086] __nand_correct_data: uncorrectable ECC error
[  316.440426] __nand_correct_data: uncorrectable ECC error
[  316.446475] __nand_correct_data: uncorrectable ECC error
[  316.451815] __nand_correct_data: uncorrectable ECC error
[  316.457448] __nand_correct_data: uncorrectable ECC error
[  316.462784] __nand_correct_data: uncorrectable ECC error
[  316.468417] __nand_correct_data: uncorrectable ECC error
[  316.473754] __nand_correct_data: uncorrectable ECC error
[  316.479385] __nand_correct_data: uncorrectable ECC error
[  316.485168] __nand_correct_data: uncorrectable ECC error
[  316.490504] __nand_correct_data: uncorrectable ECC error
[  316.496215] __nand_correct_data: uncorrectable ECC error
[  316.501554] __nand_correct_data: uncorrectable ECC error
[  316.507187] __nand_correct_data: uncorrectable ECC error
[  316.512523] __nand_correct_data: uncorrectable ECC error
[  316.518154] __nand_correct_data: uncorrectable ECC error
[  316.524124] __nand_correct_data: uncorrectable ECC error
[  316.529466] __nand_correct_data: uncorrectable ECC error
[  316.535100] __nand_correct_data: uncorrectable ECC error
[  316.540436] __nand_correct_data: uncorrectable ECC error
[  316.546067] __nand_correct_data: uncorrectable ECC error
[  316.551405] __nand_correct_data: uncorrectable ECC error
[  316.557037] __nand_correct_data: uncorrectable ECC error
[  316.562793] __nand_correct_data: uncorrectable ECC error
[  316.568425] __nand_correct_data: uncorrectable ECC error
[  316.573763] __nand_correct_data: uncorrectable ECC error
[  316.579395] __nand_correct_data: uncorrectable ECC error
[  316.584760] __nand_correct_data: uncorrectable ECC error
[  316.590095] __nand_correct_data: uncorrectable ECC error
[  316.595797] __nand_correct_data: uncorrectable ECC error
[  316.601554] __nand_correct_data: uncorrectable ECC error
[  316.607187] __nand_correct_data: uncorrectable ECC error
[  316.612524] __nand_correct_data: uncorrectable ECC error
[  316.618164] __nand_correct_data: uncorrectable ECC error
[  316.623502] __nand_correct_data: uncorrectable ECC error
[  316.629134] __nand_correct_data: uncorrectable ECC error
[  316.634504] __nand_correct_data: uncorrectable ECC error
[  316.640262] __nand_correct_data: uncorrectable ECC error
[  316.645975] __nand_correct_data: uncorrectable ECC error
[  316.651310] __nand_correct_data: uncorrectable ECC error
[  316.656941] __nand_correct_data: uncorrectable ECC error
[  316.662280] __nand_correct_data: uncorrectable ECC error
[  316.667913] __nand_correct_data: uncorrectable ECC error
[  316.673249] __nand_correct_data: uncorrectable ECC error
[  316.679299] __nand_correct_data: uncorrectable ECC error
[  316.684666] __nand_correct_data: uncorrectable ECC error
[  316.690000] __nand_correct_data: uncorrectable ECC error
[  316.695711] __nand_correct_data: uncorrectable ECC error
[  316.701049] __nand_correct_data: uncorrectable ECC error
[  316.706688] __nand_correct_data: uncorrectable ECC error
[  316.712027] __nand_correct_data: uncorrectable ECC error
[  316.718078] __nand_correct_data: uncorrectable ECC error
[  316.723416] __nand_correct_data: uncorrectable ECC error
[  316.729052] __nand_correct_data: uncorrectable ECC error
[  316.734422] __nand_correct_data: uncorrectable ECC error
[  316.739756] __nand_correct_data: uncorrectable ECC error
[  316.745457] __nand_correct_data: uncorrectable ECC error
[  316.750797] __nand_correct_data: uncorrectable ECC error
[  316.756849] __nand_correct_data: uncorrectable ECC error
[  316.762185] __nand_correct_data: uncorrectable ECC error
[  316.767819] __nand_correct_data: uncorrectable ECC error
[  316.773155] __nand_correct_data: uncorrectable ECC error
[  316.778794] __nand_correct_data: uncorrectable ECC error
[  316.784160] __nand_correct_data: uncorrectable ECC error
[  316.789496] __nand_correct_data: uncorrectable ECC error
[  316.795616] __nand_correct_data: uncorrectable ECC error
[  316.800955] __nand_correct_data: uncorrectable ECC error
[  316.806587] __nand_correct_data: uncorrectable ECC error
[  316.811925] __nand_correct_data: uncorrectable ECC error
[  316.817558] __nand_correct_data: uncorrectable ECC error
[  316.822894] __nand_correct_data: uncorrectable ECC error
[  316.828525] __nand_correct_data: uncorrectable ECC error
[  316.834309] __nand_correct_data: uncorrectable ECC error
[  316.839645] __nand_correct_data: uncorrectable ECC error
[  316.845354] __nand_correct_data: uncorrectable ECC error
[  316.850693] __nand_correct_data: uncorrectable ECC error
[  316.856326] __nand_correct_data: uncorrectable ECC error
[  316.861663] __nand_correct_data: uncorrectable ECC error
[  316.867294] __nand_correct_data: uncorrectable ECC error
[  316.873052] __nand_correct_data: uncorrectable ECC error
[  316.878684] __nand_correct_data: uncorrectable ECC error
[  316.884047] __nand_correct_data: uncorrectable ECC error
[  316.889383] __nand_correct_data: uncorrectable ECC error
[  316.895090] __nand_correct_data: uncorrectable ECC error
[  316.900432] __nand_correct_data: uncorrectable ECC error
[  316.906065] __nand_correct_data: uncorrectable ECC error
[  316.911820] __nand_correct_data: uncorrectable ECC error
[  316.917456] __nand_correct_data: uncorrectable ECC error
[  316.922799] __nand_correct_data: uncorrectable ECC error
[  316.928432] __nand_correct_data: uncorrectable ECC error
[  316.933769] __nand_correct_data: uncorrectable ECC error
[  316.939400] __nand_correct_data: uncorrectable ECC error
[  316.944873] __nand_correct_data: uncorrectable ECC error
[  316.950777] __nand_correct_data: uncorrectable ECC error
[  316.956531] __nand_correct_data: uncorrectable ECC error
[  316.961906] __nand_correct_data: uncorrectable ECC error
[  316.967546] __nand_correct_data: uncorrectable ECC error
[  316.972916] __nand_correct_data: uncorrectable ECC error
[  316.978547] __nand_correct_data: uncorrectable ECC error
[  316.983912] __nand_correct_data: uncorrectable ECC error
[  316.989675] __nand_correct_data: uncorrectable ECC error
[  316.995382] __nand_correct_data: uncorrectable ECC error
[  317.000720] __nand_correct_data: uncorrectable ECC error
[  317.006359] __nand_correct_data: uncorrectable ECC error
[  317.011699] __nand_correct_data: uncorrectable ECC error
[  317.017333] __nand_correct_data: uncorrectable ECC error
[  317.022669] __nand_correct_data: uncorrectable ECC error
[  317.028719] __nand_correct_data: uncorrectable ECC error
[  317.034084] __nand_correct_data: uncorrectable ECC error
[  317.039420] __nand_correct_data: uncorrectable ECC error
[  317.045129] __nand_correct_data: uncorrectable ECC error
[  317.050483] __nand_correct_data: uncorrectable ECC error
[  317.056106] __nand_correct_data: uncorrectable ECC error
[  317.061447] __nand_correct_data: uncorrectable ECC error
[  317.067499] __nand_correct_data: uncorrectable ECC error
[  317.072835] __nand_correct_data: uncorrectable ECC error
[  317.078470] __nand_correct_data: uncorrectable ECC error
[  317.083805] __nand_correct_data: uncorrectable ECC error
[  317.089440] __nand_correct_data: uncorrectable ECC error
[  317.094801] __nand_correct_data: uncorrectable ECC error
[  317.100137] __nand_correct_data: uncorrectable ECC error
[  317.106256] __nand_correct_data: uncorrectable ECC error
[  317.111596] __nand_correct_data: uncorrectable ECC error
[  317.117229] __nand_correct_data: uncorrectable ECC error
[  317.122565] __nand_correct_data: uncorrectable ECC error
[  317.128199] __nand_correct_data: uncorrectable ECC error
[  317.133535] __nand_correct_data: uncorrectable ECC error
[  317.139165] __nand_correct_data: uncorrectable ECC error
[  317.144950] __nand_correct_data: uncorrectable ECC error
[  317.150285] __nand_correct_data: uncorrectable ECC error
[  317.156003] __nand_correct_data: uncorrectable ECC error
[  317.161343] __nand_correct_data: uncorrectable ECC error
[  317.166976] __nand_correct_data: uncorrectable ECC error
[  317.172313] __nand_correct_data: uncorrectable ECC error
[  317.177946] __nand_correct_data: uncorrectable ECC error
[  317.183702] __nand_correct_data: uncorrectable ECC error
[  317.189336] __nand_correct_data: uncorrectable ECC error
[  317.194697] __nand_correct_data: uncorrectable ECC error
[  317.200033] __nand_correct_data: uncorrectable ECC error
[  317.205794] __nand_correct_data: uncorrectable ECC error
[  317.211165] __nand_correct_data: uncorrectable ECC error
[  317.216841] __nand_correct_data: uncorrectable ECC error
Warning: Bad CRC, using default environment
## Error: "ethaddr" not defined
root@debian:~# 
Re: Problem installing Netgear Stora
March 18, 2017 05:38AM
Hi Bodhi,

Maybe important, i did some time ago a resetenv.
Because of this i had to startup and load the flashware.img file.
I did follow this topic: http://www.openstora.com/forum/viewtopic.php?f=6&t=412&sid=0ec63b563241250366be7c45ed063b61&start=15


1. Apparently u-boot try to load the file "flashware.img" from a usb-stick very early in the booting procedure. I downloaded this file http://www.openstora.com/files/displayimage.php?pid=50, which is a working u-boot partition, uncompressed it, renamed "u-boot.mtd0" to "flashware.img", and loaded it onto a clean usb-stick formatted with ext2.

2. With the usb-stick in the Stora and working serial connection, I started the Stora. It boots as usual but somewhere in the middle you should see something like:

Code: Select all
    USB:   scanning bus for devices... 2 USB Device(s) found
           scanning bus for storage devices... 1 Storage Device(s) found
    Trying to load image from USB flash drive using FAT FS
    reading /flashware.img

    ** Unable to read "/flashware.img" from usb 0:1 **
    Trying to load image from USB flash drive using ext2 FS partition 0
    Failed to mount ext2 filesystem...
    ** Bad ext2 partition or disk - usb 0:0 **
    Trying to load image from USB flash drive using ext2 FS partition 1
    .
    .........................
    .........................
    .........................
    ........................

    1048576 bytes read


I.e. it found the usb and have loaded "flashware.img" to memory (address 0x0). Ok, so we have a working u-boot image loaded into memory so the hard part is done. The boot sequence continues as usual (thus ignores the loaded image) and one comes to:

Code: Select all
    ## Booting image at 00800000 ...
    Bad Magic Number
    Marvell>>



3. First we need to check that the image is loaded correctly. Run "crc32 0x0 0x100000" (this assumes that you use the exact file above, "0x100000" should be changed according to the real filesize). You should see:

Code: Select all
    Marvell>> crc32 0x0 0x100000
    CRC32 for 00000000 ... 000fffff ==> ec37629d


"ec37629d" is what I got, you should check this by running CRC32 on your desktop on the downloaded file ("crc32 u-boot.mtd0"). If the checksums do not match, DO NOT continue!

4. Now lets load the image to the NAND. We would like to minimize the risk of bricking the Stora for real so we will only load the bare minimum needed. Apparently the only problem is that the enviroment variables are all messed up, the u-boot code are all fine. So we will only take the enviroment variables from the image loaded in memory. The enviroment variables starts at 0xA0000. I don't know how big the variable-part is, but it should be in the end of the code so we'll take everything to the end of the image (total size is 0x100000, we start at 0xA0000 => size to load is 0x60000).

First run "nand erase 0xA0000 0x60000" and then "nand write 0xA0000 0xA0000 0x60000". You should see:

Code: Select all
    Marvell>> nand erase 0xA0000 0x60000

    NAND erase: device 0 offset 0xa0000, size 0x60000
    Erasing at 0xe0000 -- 100% complete.
    OK
    Marvell>> nand write 0xA0000 0xA0000 0x60000

    NAND write: device 0 offset 0xa0000, size 0x60000
     393216 bytes written: OK



Now everything should be ok, so we run "reset" and the Stora should boot up fully functional! Don't forget to change "ethaddr" to something else.

A few days ago, i had to flash it again, because i did get crc errors - i think from repeatly unpower after bad boot.
I added the file.
Attachments:
open | download - u-boot_mtd0.gz (202.9 KB)
Re: Problem installing Netgear Stora
March 18, 2017 09:42AM
Hi Bodhi,

I found:
http://forum.doozan.com/read.php?2,29259,29285,quote=1

And this, looking at the original boot:
...
Using static partition definition
Creating 3 MTD partitions on "nand_mtd":
0x00000000-0x00100000 : "u-boot"
0x00100000-0x00700000 : "uImage"
0x00700000-0x10000000 : "root"
..





And did this:

setenv console 'console=ttyS0,115200 mtdparts=orion_nand:0x100000@0(uboot),0xff00000@0x100000(root)'
saveenv


Output:
root@debian:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00100000 00020000 "uboot"
mtd1: 0ff00000 00020000 "root"


with original firmware:
-bash-3.2# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00100000 00020000 "u-boot"
mtd1: 00600000 00020000 "uImage"
mtd2: 0f900000 00020000 "root"
-bash-3.2#

I still have that error:

         __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_
| | | |___|  _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
 \___/    |____/ \___/ \___/ \__|
 ** MARVELL BOARD: RD-88F6281A LE

U-Boot 1.1.4 (Sep  4 2009 - 09:36:11) Marvell version: 3.4.14

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE60

Soc: 88F6281 A0 (DDR2)
CPU running @ 1000Mhz L2 running @ 333Mhz
SysClock = 333Mhz , TClock = 200Mhz

DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000   size  64MB
DRAM CS[1] base 0x04000000   size  64MB
DRAM Total size 128MB  16bit width
Flash:  0 kB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:256 MB
CRC in Flash: 70c3cb0f, Calculated CRC: 70c3cb0f

CPU : Marvell Feroceon (Rev 1)

Streaming disabled
Write allocate disabled

Module 0 is RGMII
Module 1 is TDM

USB 0: host mode
PEX 0: interface detected no Link.
Net:   egiga0, egiga1 [PRIME]
Hit any key to stop autoboot:  0
Marvell>>
Marvell>>
Marvell>> printenv console
console=console=ttyS0,115200 mtdparts=orion_nand:0x100000@0(uboot),0xff00000@0x100000(root)
Marvell>> run usb_bootcmd
(Re)start USB...
USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
....
.
......
............
.........................
...................................................
......................................................................................................
........................................................................................................

3166745 bytes read
....
.
......
............
.........................
...................................................
......................................................................................................
.................................................................................................................................................................................................................
..............................................................................................................................................................................................................................................................................................

7179935 bytes read
## Booting image at 00800000 ...
   Image Name:   Linux-4.4.0-kirkwood-tld-1
   Created:      2017-03-16  18:54:40 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3166681 Bytes =  3 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 01100000 ...
   Image Name:   initramfs-4.4.0-kirkwood-tld-1
   Created:      2016-02-19   7:33:04 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    7179871 Bytes =  6.8 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Mon Jan 25 20:35:24 PST 2016
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine model: NETGEAR MS2000 / MS2110 aka Stora
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 mtdparts=orion_nand:0x100000@0(uboot),0xff00000@0x100000(root) root=LABEL=rootfs rootfstype=ext2 rootdelay=10
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 113620K/131072K available (6007K kernel code, 573K rwdata, 1992K rodata, 296K init, 312K bss, 17452K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07d7ef4   (8000 kB)
[    0.000000]       .init : 0xc07d8000 - 0xc0822000   ( 296 kB)
[    0.000000]       .data : 0xc0822000 - 0xc08b169c   ( 574 kB)
[    0.000000]        .bss : 0xc08b169c - 0xc08ff9d0   ( 313 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000010] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.000389] Console: colour dummy device 80x30
[    0.000427] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064)
[    0.090107] pid_max: default: 32768 minimum: 301
[    0.090236] Security Framework initialized
[    0.090329] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090354] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.091296] Initializing cgroup subsys io
[    0.091335] Initializing cgroup subsys devices
[    0.091375] Initializing cgroup subsys freezer
[    0.091405] Initializing cgroup subsys net_cls
[    0.091501] CPU: Testing write buffer coherency: ok
[    0.092023] Setting up static identity map for 0x8200 - 0x8258
[    0.092397] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2
[    0.096770] devtmpfs: initialized
[    0.103108] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.103645] prandom: seed boundary self test passed
[    0.108152] prandom: 100 self tests passed
[    0.108183] pinctrl core: initialized pinctrl subsystem
[    0.109833] NET: Registered protocol family 16
[    0.110489] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.140125] cpuidle: using governor ladder
[    0.170123] cpuidle: using governor menu
[    0.170641] Feroceon L2: Enabling L2
[    0.170694] Feroceon L2: Cache support initialised.
[    0.171148] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[    0.177710] No ATAGs?
[    0.211886] vgaarb: loaded
[    0.212332] usbcore: registered new interface driver usbfs
[    0.212431] usbcore: registered new interface driver hub
[    0.212508] usbcore: registered new device driver usb
[    0.213851] clocksource: Switched to clocksource orion_clocksource
[    0.281108] NET: Registered protocol family 2
[    0.282047] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.282080] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.282105] TCP: Hash tables configured (established 1024 bind 1024)
[    0.282186] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.282215] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.282451] NET: Registered protocol family 1
[    0.282933] RPC: Registered named UNIX socket transport module.
[    0.282948] RPC: Registered udp transport module.
[    0.282957] RPC: Registered tcp transport module.
[    0.282966] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.283298] Unpacking initramfs...
[    1.046800] Freeing initrd memory: 7012K (c1100000 - c17d9000)
[    1.046972] NetWinder Floating Point Emulator V0.97 (double precision)
[    1.048302] futex hash table entries: 256 (order: -1, 3072 bytes)
[    1.048390] audit: initializing netlink subsys (disabled)
[    1.048449] audit: type=2000 audit(1.040:1): initialized
[    1.048878] Initialise system trusted keyring
[    1.049358] zbud: loaded
[    1.049714] VFS: Disk quotas dquot_6.6.0
[    1.049785] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.050444] NFS: Registering the id_resolver key type
[    1.050496] Key type id_resolver registered
[    1.050508] Key type id_legacy registered
[    1.050540] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.050557] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.050824] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.051453] Key type big_key registered
[    1.075683] Key type asymmetric registered
[    1.075711] Asymmetric key parser 'x509' registered
[    1.075827] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.075853] io scheduler noop registered
[    1.075873] io scheduler deadline registered
[    1.075945] io scheduler cfq registered (default)
[    1.077569] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[    1.078392] irq: Cannot allocate irq_descs @ IRQ34, assuming pre-allocated
[    1.078918] irq: Cannot allocate irq_descs @ IRQ66, assuming pre-allocated
[    1.079936] mvebu-pcie mbus:pcie-controller: PCI host bridge to bus 0000:00
[    1.079960] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    1.079977] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[    1.079993] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.080470] PCI: bus0: Fast back to back transfers disabled
[    1.080502] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.080753] PCI: bus1: Fast back to back transfers enabled
[    1.080861] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.081259] mv_xor f1060800.xor: Marvell shared XOR driver
[    1.124711] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    1.125003] mv_xor f1060900.xor: Marvell shared XOR driver
[    1.164690] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    1.165300] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.167004] console [ttyS0] disabled
[    1.167082] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[    1.819289] console [ttyS0] enabled
[    1.824373] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda
[    1.830761] nand: Samsung NAND 256MiB 3,3V 8-bit
[    1.835437] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.843066] Scanning device for bad blocks
[    1.873679] Bad eraseblock 246 at 0x000001ec0000
[    1.920579] Bad eraseblock 640 at 0x000005000000
[    1.931613] Bad eraseblock 700 at 0x000005780000
[    1.936443] Bad eraseblock 702 at 0x0000057c0000
[    2.002018] Bad eraseblock 1270 at 0x000009ec0000
[    2.027547] Bad eraseblock 1464 at 0x00000b700000
[    2.053767] Bad eraseblock 1664 at 0x00000d000000
[    2.064924] Bad eraseblock 1724 at 0x00000d780000
[    2.069815] Bad eraseblock 1726 at 0x00000d7c0000
[    2.078579] Bad eraseblock 1764 at 0x00000dc80000
[    2.113705] 2 cmdlinepart partitions found on MTD device orion_nand
[    2.120026] Creating 2 MTD partitions on "orion_nand":
[    2.125219] 0x000000000000-0x000000100000 : "uboot"
[    2.131684] 0x000000100000-0x000010000000 : "root"
[    2.139819] libphy: Fixed MDIO Bus: probed
[    2.144405] libphy: orion_mdio_bus: probed
[    2.154277] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[    3.232704] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:00:02:02
[    3.241662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.248285] ehci-pci: EHCI PCI platform driver
[    3.252849] ehci-orion: EHCI orion driver
[    3.257139] orion-ehci f1050000.ehci: EHCI Host Controller
[    3.262687] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[    3.270605] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[    3.293892] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[    3.300210] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.307069] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.314355] usb usb1: Product: EHCI Host Controller
[    3.319259] usb usb1: Manufacturer: Linux 4.4.0-kirkwood-tld-1 ehci_hcd
[    3.325925] usb usb1: SerialNumber: f1050000.ehci
[    3.331568] hub 1-0:1.0: USB hub found
[    3.335441] hub 1-0:1.0: 1 port detected
[    3.340593] mousedev: PS/2 mouse device common for all mice
[    3.653891] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    3.806363] usb 1-1: New USB device found, idVendor=125f, idProduct=c83a
[    3.813115] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.820321] usb 1-1: Product: A-DATA USB Flash Drive
[    3.825347] usb 1-1: Manufacturer: A-DATA
[    3.829378] usb 1-1: SerialNumber: 06e7cf43be21fe
[    4.353890] rtc-mv f1010300.rtc: internal RTC not ticking
[    4.359583] i2c /dev entries driver
[    4.364284] rtc-pcf8563 0-0051: chip found, driver version 0.4.4
[    4.376372] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
[    4.386266] hidraw: raw HID events driver (C) Jiri Kosina
[    4.392157] drop_monitor: Initializing network drop monitor service
[    4.398815] NET: Registered protocol family 17
[    4.403606] Key type dns_resolver registered
[    4.408985] registered taskstats version 1
[    4.413154] Loading compiled-in X.509 certificates
[    4.418077] zswap: loaded using pool lzo/zbud
[    4.432906] Key type encrypted registered
[    4.438977] rtc-pcf8563 0-0051: setting system clock to 2017-03-18 14:26:49 UTC (1489847209)
[    4.450858] Freeing unused kernel memory: 296K (c07d8000 - c0822000)
Loading, please wait...
[    4.540770] systemd-udevd[81]: starting version 215
[    4.556523] random: systemd-udevd urandom read with 8 bits of entropy available
[    4.770105] SCSI subsystem initialized
[    4.819921] usb-storage 1-1:1.0: USB Mass Storage device detected
[    4.840150] sata_mv f1080000.sata: slots 32 ports 2
[    4.872713] scsi host0: usb-storage 1-1:1.0
[    4.888775] usbcore: registered new interface driver usb-storage
[    4.898329] scsi host1: sata_mv
[    4.916463] scsi host2: sata_mv
[    4.920072] ata1: SATA max UDMA/133 irq 33
[    4.930547] usbcore: registered new interface driver uas
[    4.953286] ata2: SATA max UDMA/133 irq 33
[    5.313905] ata1: SATA link down (SStatus 0 SControl F300)
[    5.683915] ata2: SATA link down (SStatus 0 SControl F300)
[    5.885357] scsi 0:0:0:0: Direct-Access     A-DATA   USB Flash Drive  0.00 PQ: 0 ANSI: 2
[    5.901569] sd 0:0:0:0: [sda] 7897088 512-byte logical blocks: (4.04 GB/3.76 GiB)
[    5.912919] sd 0:0:0:0: [sda] Write Protect is off
[    5.918400] sd 0:0:0:0: [sda] Asking for cache data failed
[    5.924075] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    6.040179]  sda: sda1
[    6.046923] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    6.057534] sd 0:0:0:0: Attached scsi generic sg0 type 0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Checking root file system ... fsck from util-linux 2.25.2
rootfs: clean, 14839/247008 files, 198718/986880 blocks
done.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd[   17.367659] systemd-udevd[291]: starting version 215
. ok
[....] Synthesizing the initial hotplug events...[   17.667526] input: gpio-keys as /devices/platform/gpio-keys/input/input0
done.
[....] Waiting for /dev to be fully populated...[   18.010363] orion_wdt: Initial timeout 21 sec
[   18.059426] lm75 0-0048: hwmon0: sensor 'lm75'
[   18.066111] marvell-cesa: probe of f1030000.crypto failed with error -524
[   18.156643] random: nonblocking pool is initialized
done.
[ ok ] Activating swap...done.
[....] Checking root file system...fsck from util-linux 2.25.2
rootfs: clean, 14839/247008 files, 198718/986880 blocks
done.
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.25.2
done.
[ ok ] Loading kernel modules...done.
[ ok ] Cleaning up temporary files... /tmp.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables ...done.
[   22.806879] NET: Registered protocol family 10
[   23.996337] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.1
Copyright 2004-2014 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/00:50:43:00:02:02
Sending on   LPF/eth0/00:50:43:00:02:02
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
[   27.034293] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[   27.044231] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPOFFER from 192.168.1.1
DHCPACK from 192.168.1.1
bound to 192.168.1.217 -- renewal in 32972 seconds.
done.
[ ok ] Starting rpcbind daemon....
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1235 (syslogd)
. ok
[ ok ] Starting system message bus: dbus.
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[ ok ] Starting NTP server: ntpd.
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1238 (klogd)
. ok
[ ok ] Starting OpenBSD Secure Shell server: sshd.

Debian GNU/Linux 8 debian ttyS0

debian login: root
Password:
Last login: Sat Mar 18 13:40:44 CET 2017 on ttyS0
Linux debian 4.4.0-kirkwood-tld-1 #1 PREEMPT Mon Jan 25 20:35:24 PST 2016 armv5tel

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00100000 00020000 "uboot"
mtd1: 0ff00000 00020000 "root"
root@debian:~# cat /etc/fw_env.config
# Configuration file for fw_(printenv/saveenv) utility.
# Up to two entries are valid, in this case the redundant
# environment sector is assumed present.
# Notice, that the "Number of sectors" is ignored on NOR.

# MTD device name       Device offset   Env. size       Flash sector size       Number of sectors
/dev/mtd0               0xc0000         0x20000         0x20000
root@debian:~# fw_printenv ethaddr
[  729.598503] __nand_correct_data: uncorrectable ECC error
[  729.603937] __nand_correct_data: uncorrectable ECC error
[  729.609309] __nand_correct_data: uncorrectable ECC error
[  729.615156] __nand_correct_data: uncorrectable ECC error
[  729.620544] __nand_correct_data: uncorrectable ECC error
[  729.626223] __nand_correct_data: uncorrectable ECC error
[  729.631574] __nand_correct_data: uncorrectable ECC error
[  729.637636] __nand_correct_data: uncorrectable ECC error
[  729.642973] __nand_correct_data: uncorrectable ECC error
[  729.648614] __nand_correct_data: uncorrectable ECC error
[  729.653983] __nand_correct_data: uncorrectable ECC error
[  729.659322] __nand_correct_data: uncorrectable ECC error
[  729.665031] __nand_correct_data: uncorrectable ECC error
[  729.670371] __nand_correct_data: uncorrectable ECC error
[  729.676422] __nand_correct_data: uncorrectable ECC error
[  729.681760] __nand_correct_data: uncorrectable ECC error
[  729.687395] __nand_correct_data: uncorrectable ECC error
[  729.692729] __nand_correct_data: uncorrectable ECC error
[  729.698365] __nand_correct_data: uncorrectable ECC error
[  729.703699] __nand_correct_data: uncorrectable ECC error
[  729.709333] __nand_correct_data: uncorrectable ECC error
[  729.715117] __nand_correct_data: uncorrectable ECC error
[  729.720450] __nand_correct_data: uncorrectable ECC error
[  729.726155] __nand_correct_data: uncorrectable ECC error
[  729.731489] __nand_correct_data: uncorrectable ECC error
[  729.737123] __nand_correct_data: uncorrectable ECC error
[  729.742460] __nand_correct_data: uncorrectable ECC error
[  729.748100] __nand_correct_data: uncorrectable ECC error
[  729.754072] __nand_correct_data: uncorrectable ECC error
[  729.759411] __nand_correct_data: uncorrectable ECC error
[  729.765043] __nand_correct_data: uncorrectable ECC error
[  729.770380] __nand_correct_data: uncorrectable ECC error
[  729.776013] __nand_correct_data: uncorrectable ECC error
[  729.781350] __nand_correct_data: uncorrectable ECC error
[  729.786980] __nand_correct_data: uncorrectable ECC error
[  729.792739] __nand_correct_data: uncorrectable ECC error
[  729.798374] __nand_correct_data: uncorrectable ECC error
[  729.803717] __nand_correct_data: uncorrectable ECC error
[  729.809348] __nand_correct_data: uncorrectable ECC error
[  729.814722] __nand_correct_data: uncorrectable ECC error
[  729.820058] __nand_correct_data: uncorrectable ECC error
[  729.825767] __nand_correct_data: uncorrectable ECC error
[  729.831525] __nand_correct_data: uncorrectable ECC error
[  729.837161] __nand_correct_data: uncorrectable ECC error
[  729.842504] __nand_correct_data: uncorrectable ECC error
[  729.848136] __nand_correct_data: uncorrectable ECC error
[  729.853473] __nand_correct_data: uncorrectable ECC error
[  729.859107] __nand_correct_data: uncorrectable ECC error
[  729.864473] __nand_correct_data: uncorrectable ECC error
[  729.870224] __nand_correct_data: uncorrectable ECC error
[  729.875928] __nand_correct_data: uncorrectable ECC error
[  729.881264] __nand_correct_data: uncorrectable ECC error
[  729.886896] __nand_correct_data: uncorrectable ECC error
[  729.892235] __nand_correct_data: uncorrectable ECC error
[  729.897866] __nand_correct_data: uncorrectable ECC error
[  729.903204] __nand_correct_data: uncorrectable ECC error
[  729.909254] __nand_correct_data: uncorrectable ECC error
[  729.914623] __nand_correct_data: uncorrectable ECC error
[  729.919964] __nand_correct_data: uncorrectable ECC error
[  729.925665] __nand_correct_data: uncorrectable ECC error
[  729.931003] __nand_correct_data: uncorrectable ECC error
[  729.936634] __nand_correct_data: uncorrectable ECC error
[  729.941973] __nand_correct_data: uncorrectable ECC error
[  729.948024] __nand_correct_data: uncorrectable ECC error
[  729.953362] __nand_correct_data: uncorrectable ECC error
[  729.958994] __nand_correct_data: uncorrectable ECC error
[  729.964361] __nand_correct_data: uncorrectable ECC error
[  729.969693] __nand_correct_data: uncorrectable ECC error
[  729.975504] __nand_correct_data: uncorrectable ECC error
[  729.980906] __nand_correct_data: uncorrectable ECC error
[  729.987074] __nand_correct_data: uncorrectable ECC error
[  729.992452] __nand_correct_data: uncorrectable ECC error
[  729.998101] __nand_correct_data: uncorrectable ECC error
[  730.003471] __nand_correct_data: uncorrectable ECC error
[  730.009222] __nand_correct_data: uncorrectable ECC error
[  730.014596] __nand_correct_data: uncorrectable ECC error
[  730.019940] __nand_correct_data: uncorrectable ECC error
[  730.026076] __nand_correct_data: uncorrectable ECC error
[  730.031414] __nand_correct_data: uncorrectable ECC error
[  730.037054] __nand_correct_data: uncorrectable ECC error
[  730.042393] __nand_correct_data: uncorrectable ECC error
[  730.048027] __nand_correct_data: uncorrectable ECC error
[  730.053362] __nand_correct_data: uncorrectable ECC error
[  730.059002] __nand_correct_data: uncorrectable ECC error
[  730.064791] __nand_correct_data: uncorrectable ECC error
[  730.070131] __nand_correct_data: uncorrectable ECC error
[  730.075835] __nand_correct_data: uncorrectable ECC error
[  730.081185] __nand_correct_data: uncorrectable ECC error
[  730.086818] __nand_correct_data: uncorrectable ECC error
[  730.092158] __nand_correct_data: uncorrectable ECC error
[  730.097790] __nand_correct_data: uncorrectable ECC error
[  730.103545] __nand_correct_data: uncorrectable ECC error
[  730.109181] __nand_correct_data: uncorrectable ECC error
[  730.114545] __nand_correct_data: uncorrectable ECC error
[  730.119878] __nand_correct_data: uncorrectable ECC error
[  730.125591] __nand_correct_data: uncorrectable ECC error
[  730.130926] __nand_correct_data: uncorrectable ECC error
[  730.136559] __nand_correct_data: uncorrectable ECC error
[  730.142315] __nand_correct_data: uncorrectable ECC error
[  730.147950] __nand_correct_data: uncorrectable ECC error
[  730.153309] __nand_correct_data: uncorrectable ECC error
[  730.158937] __nand_correct_data: uncorrectable ECC error
[  730.164302] __nand_correct_data: uncorrectable ECC error
[  730.169634] __nand_correct_data: uncorrectable ECC error
[  730.175340] __nand_correct_data: uncorrectable ECC error
[  730.181102] __nand_correct_data: uncorrectable ECC error
[  730.186736] __nand_correct_data: uncorrectable ECC error
[  730.192071] __nand_correct_data: uncorrectable ECC error
[  730.197706] __nand_correct_data: uncorrectable ECC error
[  730.203041] __nand_correct_data: uncorrectable ECC error
[  730.208672] __nand_correct_data: uncorrectable ECC error
[  730.214041] __nand_correct_data: uncorrectable ECC error
[  730.219791] __nand_correct_data: uncorrectable ECC error
[  730.225559] __nand_correct_data: uncorrectable ECC error
[  730.230933] __nand_correct_data: uncorrectable ECC error
[  730.236612] __nand_correct_data: uncorrectable ECC error
[  730.241980] __nand_correct_data: uncorrectable ECC error
[  730.247628] __nand_correct_data: uncorrectable ECC error
[  730.252962] __nand_correct_data: uncorrectable ECC error
[  730.259016] __nand_correct_data: uncorrectable ECC error
[  730.264383] __nand_correct_data: uncorrectable ECC error
[  730.269723] __nand_correct_data: uncorrectable ECC error
[  730.275431] __nand_correct_data: uncorrectable ECC error
[  730.280771] __nand_correct_data: uncorrectable ECC error
[  730.286405] __nand_correct_data: uncorrectable ECC error
[  730.291740] __nand_correct_data: uncorrectable ECC error
[  730.297792] __nand_correct_data: uncorrectable ECC error
[  730.303129] __nand_correct_data: uncorrectable ECC error
[  730.308764] __nand_correct_data: uncorrectable ECC error
[  730.314130] __nand_correct_data: uncorrectable ECC error
[  730.319471] __nand_correct_data: uncorrectable ECC error
[  730.325173] __nand_correct_data: uncorrectable ECC error
[  730.330510] __nand_correct_data: uncorrectable ECC error
[  730.336559] __nand_correct_data: uncorrectable ECC error
[  730.341898] __nand_correct_data: uncorrectable ECC error
[  730.347535] __nand_correct_data: uncorrectable ECC error
[  730.352877] __nand_correct_data: uncorrectable ECC error
[  730.358509] __nand_correct_data: uncorrectable ECC error
[  730.363876] __nand_correct_data: uncorrectable ECC error
[  730.369209] __nand_correct_data: uncorrectable ECC error
[  730.375334] __nand_correct_data: uncorrectable ECC error
[  730.380676] __nand_correct_data: uncorrectable ECC error
[  730.386311] __nand_correct_data: uncorrectable ECC error
[  730.391646] __nand_correct_data: uncorrectable ECC error
[  730.397278] __nand_correct_data: uncorrectable ECC error
[  730.402616] __nand_correct_data: uncorrectable ECC error
[  730.408248] __nand_correct_data: uncorrectable ECC error
[  730.414221] __nand_correct_data: uncorrectable ECC error
[  730.419558] __nand_correct_data: uncorrectable ECC error
[  730.425191] __nand_correct_data: uncorrectable ECC error
[  730.430528] __nand_correct_data: uncorrectable ECC error
[  730.436160] __nand_correct_data: uncorrectable ECC error
[  730.441499] __nand_correct_data: uncorrectable ECC error
[  730.447128] __nand_correct_data: uncorrectable ECC error
[  730.452886] __nand_correct_data: uncorrectable ECC error
[  730.458519] __nand_correct_data: uncorrectable ECC error
[  730.463886] __nand_correct_data: uncorrectable ECC error
[  730.469218] __nand_correct_data: uncorrectable ECC error
[  730.474918] __nand_correct_data: uncorrectable ECC error
[  730.480259] __nand_correct_data: uncorrectable ECC error
[  730.485891] __nand_correct_data: uncorrectable ECC error
[  730.491647] __nand_correct_data: uncorrectable ECC error
[  730.497283] __nand_correct_data: uncorrectable ECC error
[  730.502625] __nand_correct_data: uncorrectable ECC error
[  730.508259] __nand_correct_data: uncorrectable ECC error
[  730.513595] __nand_correct_data: uncorrectable ECC error
[  730.519226] __nand_correct_data: uncorrectable ECC error
[  730.524594] __nand_correct_data: uncorrectable ECC error
[  730.530346] __nand_correct_data: uncorrectable ECC error
[  730.536056] __nand_correct_data: uncorrectable ECC error
[  730.541469] __nand_correct_data: uncorrectable ECC error
[  730.547145] __nand_correct_data: uncorrectable ECC error
[  730.552487] __nand_correct_data: uncorrectable ECC error
[  730.558144] __nand_correct_data: uncorrectable ECC error
[  730.563483] __nand_correct_data: uncorrectable ECC error
[  730.569555] __nand_correct_data: uncorrectable ECC error
[  730.574928] __nand_correct_data: uncorrectable ECC error
[  730.580268] __nand_correct_data: uncorrectable ECC error
[  730.585973] __nand_correct_data: uncorrectable ECC error
[  730.591308] __nand_correct_data: uncorrectable ECC error
[  730.596941] __nand_correct_data: uncorrectable ECC error
[  730.602278] __nand_correct_data: uncorrectable ECC error
[  730.608328] __nand_correct_data: uncorrectable ECC error
[  730.613666] __nand_correct_data: uncorrectable ECC error
[  730.619301] __nand_correct_data: uncorrectable ECC error
[  730.624675] __nand_correct_data: uncorrectable ECC error
[  730.630007] __nand_correct_data: uncorrectable ECC error
[  730.635710] __nand_correct_data: uncorrectable ECC error
[  730.641047] __nand_correct_data: uncorrectable ECC error
[  730.647096] __nand_correct_data: uncorrectable ECC error
[  730.652436] __nand_correct_data: uncorrectable ECC error
[  730.658069] __nand_correct_data: uncorrectable ECC error
[  730.663405] __nand_correct_data: uncorrectable ECC error
[  730.669037] __nand_correct_data: uncorrectable ECC error
[  730.674404] __nand_correct_data: uncorrectable ECC error
[  730.679737] __nand_correct_data: uncorrectable ECC error
[  730.685865] __nand_correct_data: uncorrectable ECC error
[  730.691204] __nand_correct_data: uncorrectable ECC error
[  730.696838] __nand_correct_data: uncorrectable ECC error
[  730.702173] __nand_correct_data: uncorrectable ECC error
[  730.707807] __nand_correct_data: uncorrectable ECC error
[  730.713144] __nand_correct_data: uncorrectable ECC error
[  730.718777] __nand_correct_data: uncorrectable ECC error
[  730.724562] __nand_correct_data: uncorrectable ECC error
[  730.729894] __nand_correct_data: uncorrectable ECC error
[  730.735604] __nand_correct_data: uncorrectable ECC error
[  730.740943] __nand_correct_data: uncorrectable ECC error
[  730.746576] __nand_correct_data: uncorrectable ECC error
[  730.751913] __nand_correct_data: uncorrectable ECC error
[  730.757546] __nand_correct_data: uncorrectable ECC error
[  730.763301] __nand_correct_data: uncorrectable ECC error
[  730.768936] __nand_correct_data: uncorrectable ECC error
[  730.774301] __nand_correct_data: uncorrectable ECC error
[  730.779633] __nand_correct_data: uncorrectable ECC error
[  730.785335] __nand_correct_data: uncorrectable ECC error
[  730.790673] __nand_correct_data: uncorrectable ECC error
[  730.796307] __nand_correct_data: uncorrectable ECC error
[  730.802061] __nand_correct_data: uncorrectable ECC error
[  730.807694] __nand_correct_data: uncorrectable ECC error
[  730.813031] __nand_correct_data: uncorrectable ECC error
[  730.818664] __nand_correct_data: uncorrectable ECC error
[  730.824032] __nand_correct_data: uncorrectable ECC error
[  730.829372] __nand_correct_data: uncorrectable ECC error
[  730.835074] __nand_correct_data: uncorrectable ECC error
[  730.840831] __nand_correct_data: uncorrectable ECC error
[  730.846465] __nand_correct_data: uncorrectable ECC error
[  730.851801] __nand_correct_data: uncorrectable ECC error
[  730.857433] __nand_correct_data: uncorrectable ECC error
[  730.862770] __nand_correct_data: uncorrectable ECC error
[  730.868401] __nand_correct_data: uncorrectable ECC error
[  730.873739] __nand_correct_data: uncorrectable ECC error
[  730.879792] __nand_correct_data: uncorrectable ECC error
[  730.885159] __nand_correct_data: uncorrectable ECC error
[  730.890500] __nand_correct_data: uncorrectable ECC error
[  730.896199] __nand_correct_data: uncorrectable ECC error
[  730.901539] __nand_correct_data: uncorrectable ECC error
[  730.907172] __nand_correct_data: uncorrectable ECC error
[  730.912509] __nand_correct_data: uncorrectable ECC error
[  730.918559] __nand_correct_data: uncorrectable ECC error
[  730.923927] __nand_correct_data: uncorrectable ECC error
[  730.929260] __nand_correct_data: uncorrectable ECC error
[  730.934968] __nand_correct_data: uncorrectable ECC error
[  730.940308] __nand_correct_data: uncorrectable ECC error
[  730.945946] __nand_correct_data: uncorrectable ECC error
[  730.951287] __nand_correct_data: uncorrectable ECC error
[  730.957336] __nand_correct_data: uncorrectable ECC error
[  730.962675] __nand_correct_data: uncorrectable ECC error
[  730.968311] __nand_correct_data: uncorrectable ECC error
[  730.973654] __nand_correct_data: uncorrectable ECC error
[  730.979286] __nand_correct_data: uncorrectable ECC error
[  730.984653] __nand_correct_data: uncorrectable ECC error
[  730.989985] __nand_correct_data: uncorrectable ECC error
[  730.996110] __nand_correct_data: uncorrectable ECC error
[  731.001453] __nand_correct_data: uncorrectable ECC error
[  731.007125] __nand_correct_data: uncorrectable ECC error
[  731.012466] __nand_correct_data: uncorrectable ECC error
[  731.018215] __nand_correct_data: uncorrectable ECC error
[  731.023559] __nand_correct_data: uncorrectable ECC error
[  731.029202] __nand_correct_data: uncorrectable ECC error
[  731.034988] __nand_correct_data: uncorrectable ECC error
[  731.040326] __nand_correct_data: uncorrectable ECC error
[  731.046037] __nand_correct_data: uncorrectable ECC error
[  731.051375] __nand_correct_data: uncorrectable ECC error
[  731.057010] __nand_correct_data: uncorrectable ECC error
[  731.062345] __nand_correct_data: uncorrectable ECC error
[  731.067977] __nand_correct_data: uncorrectable ECC error
[  731.073733] __nand_correct_data: uncorrectable ECC error
[  731.079376] __nand_correct_data: uncorrectable ECC error
[  731.084742] __nand_correct_data: uncorrectable ECC error
[  731.090074] __nand_correct_data: uncorrectable ECC error
[  731.095774] __nand_correct_data: uncorrectable ECC error
[  731.101114] __nand_correct_data: uncorrectable ECC error
[  731.106747] __nand_correct_data: uncorrectable ECC error
[  731.112501] __nand_correct_data: uncorrectable ECC error
[  731.118135] __nand_correct_data: uncorrectable ECC error
[  731.123472] __nand_correct_data: uncorrectable ECC error
[  731.129105] __nand_correct_data: uncorrectable ECC error
[  731.134472] __nand_correct_data: uncorrectable ECC error
[  731.139804] __nand_correct_data: uncorrectable ECC error
[  731.145505] __nand_correct_data: uncorrectable ECC error
[  731.151263] __nand_correct_data: uncorrectable ECC error
[  731.156897] __nand_correct_data: uncorrectable ECC error
[  731.162232] __nand_correct_data: uncorrectable ECC error
[  731.167865] __nand_correct_data: uncorrectable ECC error
[  731.173202] __nand_correct_data: uncorrectable ECC error
[  731.178833] __nand_correct_data: uncorrectable ECC error
[  731.184202] __nand_correct_data: uncorrectable ECC error
[  731.189962] __nand_correct_data: uncorrectable ECC error
[  731.195669] __nand_correct_data: uncorrectable ECC error
[  731.201010] __nand_correct_data: uncorrectable ECC error
[  731.206641] __nand_correct_data: uncorrectable ECC error
[  731.211980] __nand_correct_data: uncorrectable ECC error
[  731.217613] __nand_correct_data: uncorrectable ECC error
[  731.222950] __nand_correct_data: uncorrectable ECC error
[  731.229024] __nand_correct_data: uncorrectable ECC error
[  731.234397] __nand_correct_data: uncorrectable ECC error
[  731.239735] __nand_correct_data: uncorrectable ECC error
[  731.245499] __nand_correct_data: uncorrectable ECC error
[  731.250866] __nand_correct_data: uncorrectable ECC error
[  731.256545] __nand_correct_data: uncorrectable ECC error
[  731.261915] __nand_correct_data: uncorrectable ECC error
[  731.267987] __nand_correct_data: uncorrectable ECC error
[  731.273325] __nand_correct_data: uncorrectable ECC error
[  731.278966] __nand_correct_data: uncorrectable ECC error
[  731.284335] __nand_correct_data: uncorrectable ECC error
[  731.289675] __nand_correct_data: uncorrectable ECC error
[  731.295377] __nand_correct_data: uncorrectable ECC error
[  731.300715] __nand_correct_data: uncorrectable ECC error
[  731.306767] __nand_correct_data: uncorrectable ECC error
[  731.312102] __nand_correct_data: uncorrectable ECC error
[  731.317741] __nand_correct_data: uncorrectable ECC error
[  731.323082] __nand_correct_data: uncorrectable ECC error
[  731.328716] __nand_correct_data: uncorrectable ECC error
[  731.334081] __nand_correct_data: uncorrectable ECC error
[  731.339413] __nand_correct_data: uncorrectable ECC error
[  731.345532] __nand_correct_data: uncorrectable ECC error
[  731.350872] __nand_correct_data: uncorrectable ECC error
[  731.356505] __nand_correct_data: uncorrectable ECC error
[  731.361841] __nand_correct_data: uncorrectable ECC error
[  731.367474] __nand_correct_data: uncorrectable ECC error
[  731.372812] __nand_correct_data: uncorrectable ECC error
[  731.378443] __nand_correct_data: uncorrectable ECC error
[  731.384420] __nand_correct_data: uncorrectable ECC error
[  731.389764] __nand_correct_data: uncorrectable ECC error
[  731.395403] __nand_correct_data: uncorrectable ECC error
[  731.400742] __nand_correct_data: uncorrectable ECC error
[  731.406373] __nand_correct_data: uncorrectable ECC error
[  731.411712] __nand_correct_data: uncorrectable ECC error
[  731.417344] __nand_correct_data: uncorrectable ECC error
[  731.423099] __nand_correct_data: uncorrectable ECC error
[  731.428736] __nand_correct_data: uncorrectable ECC error
[  731.434108] __nand_correct_data: uncorrectable ECC error
[  731.439440] __nand_correct_data: uncorrectable ECC error
[  731.445146] __nand_correct_data: uncorrectable ECC error
[  731.450481] __nand_correct_data: uncorrectable ECC error
[  731.456114] __nand_correct_data: uncorrectable ECC error
[  731.461868] __nand_correct_data: uncorrectable ECC error
[  731.467503] __nand_correct_data: uncorrectable ECC error
[  731.472838] __nand_correct_data: uncorrectable ECC error
[  731.478471] __nand_correct_data: uncorrectable ECC error
[  731.483808] __nand_correct_data: uncorrectable ECC error
[  731.489439] __nand_correct_data: uncorrectable ECC error
[  731.494808] __nand_correct_data: uncorrectable ECC error
[  731.500559] __nand_correct_data: uncorrectable ECC error
[  731.506268] __nand_correct_data: uncorrectable ECC error
[  731.511608] __nand_correct_data: uncorrectable ECC error
[  731.517240] __nand_correct_data: uncorrectable ECC error
[  731.522577] __nand_correct_data: uncorrectable ECC error
[  731.528210] __nand_correct_data: uncorrectable ECC error
[  731.533547] __nand_correct_data: uncorrectable ECC error
[  731.539597] __nand_correct_data: uncorrectable ECC error
[  731.544966] __nand_correct_data: uncorrectable ECC error
[  731.550307] __nand_correct_data: uncorrectable ECC error
[  731.556015] __nand_correct_data: uncorrectable ECC error
[  731.561355] __nand_correct_data: uncorrectable ECC error
[  731.566990] __nand_correct_data: uncorrectable ECC error
[  731.572325] __nand_correct_data: uncorrectable ECC error
[  731.578376] __nand_correct_data: uncorrectable ECC error
[  731.583713] __nand_correct_data: uncorrectable ECC error
[  731.589352] __nand_correct_data: uncorrectable ECC error
[  731.594812] __nand_correct_data: uncorrectable ECC error
[  731.600151] __nand_correct_data: uncorrectable ECC error
[  731.605886] __nand_correct_data: uncorrectable ECC error
[  731.611225] __nand_correct_data: uncorrectable ECC error
[  731.617301] __nand_correct_data: uncorrectable ECC error
[  731.622639] __nand_correct_data: uncorrectable ECC error
[  731.628277] __nand_correct_data: uncorrectable ECC error
[  731.633618] __nand_correct_data: uncorrectable ECC error
[  731.639252] __nand_correct_data: uncorrectable ECC error
[  731.644618] __nand_correct_data: uncorrectable ECC error
[  731.649950] __nand_correct_data: uncorrectable ECC error
[  731.656069] __nand_correct_data: uncorrectable ECC error
[  731.661409] __nand_correct_data: uncorrectable ECC error
[  731.667044] __nand_correct_data: uncorrectable ECC error
[  731.672379] __nand_correct_data: uncorrectable ECC error
[  731.678012] __nand_correct_data: uncorrectable ECC error
[  731.683348] __nand_correct_data: uncorrectable ECC error
[  731.688981] __nand_correct_data: uncorrectable ECC error
[  731.694767] __nand_correct_data: uncorrectable ECC error
[  731.700108] __nand_correct_data: uncorrectable ECC error
[  731.705817] __nand_correct_data: uncorrectable ECC error
[  731.711156] __nand_correct_data: uncorrectable ECC error
[  731.716788] __nand_correct_data: uncorrectable ECC error
[  731.722127] __nand_correct_data: uncorrectable ECC error
[  731.727759] __nand_correct_data: uncorrectable ECC error
[  731.733514] __nand_correct_data: uncorrectable ECC error
[  731.739149] __nand_correct_data: uncorrectable ECC error
[  731.744515] __nand_correct_data: uncorrectable ECC error
[  731.749856] __nand_correct_data: uncorrectable ECC error
[  731.755563] __nand_correct_data: uncorrectable ECC error
[  731.760904] __nand_correct_data: uncorrectable ECC error
[  731.766538] __nand_correct_data: uncorrectable ECC error
[  731.772292] __nand_correct_data: uncorrectable ECC error
[  731.777925] __nand_correct_data: uncorrectable ECC error
[  731.783262] __nand_correct_data: uncorrectable ECC error
[  731.788895] __nand_correct_data: uncorrectable ECC error
[  731.794263] __nand_correct_data: uncorrectable ECC error
[  731.799595] __nand_correct_data: uncorrectable ECC error
[  731.805294] __nand_correct_data: uncorrectable ECC error
[  731.811052] __nand_correct_data: uncorrectable ECC error
[  731.816687] __nand_correct_data: uncorrectable ECC error
[  731.822022] __nand_correct_data: uncorrectable ECC error
[  731.827655] __nand_correct_data: uncorrectable ECC error
[  731.832992] __nand_correct_data: uncorrectable ECC error
[  731.838625] __nand_correct_data: uncorrectable ECC error
[  731.843992] __nand_correct_data: uncorrectable ECC error
[  731.849743] __nand_correct_data: uncorrectable ECC error
[  731.855446] __nand_correct_data: uncorrectable ECC error
[  731.860783] __nand_correct_data: uncorrectable ECC error
[  731.866414] __nand_correct_data: uncorrectable ECC error
[  731.871752] __nand_correct_data: uncorrectable ECC error
[  731.877385] __nand_correct_data: uncorrectable ECC error
[  731.882722] __nand_correct_data: uncorrectable ECC error
[  731.888772] __nand_correct_data: uncorrectable ECC error
[  731.894146] __nand_correct_data: uncorrectable ECC error
[  731.899482] __nand_correct_data: uncorrectable ECC error
[  731.905192] __nand_correct_data: uncorrectable ECC error
[  731.910531] __nand_correct_data: uncorrectable ECC error
[  731.916163] __nand_correct_data: uncorrectable ECC error
[  731.921500] __nand_correct_data: uncorrectable ECC error
[  731.927551] __nand_correct_data: uncorrectable ECC error
[  731.932889] __nand_correct_data: uncorrectable ECC error
[  731.938524] __nand_correct_data: uncorrectable ECC error
[  731.943896] __nand_correct_data: uncorrectable ECC error
[  731.949229] __nand_correct_data: uncorrectable ECC error
[  731.954936] __nand_correct_data: uncorrectable ECC error
[  731.960277] __nand_correct_data: uncorrectable ECC error
[  731.966329] __nand_correct_data: uncorrectable ECC error
[  731.971666] __nand_correct_data: uncorrectable ECC error
[  731.977301] __nand_correct_data: uncorrectable ECC error
[  731.982635] __nand_correct_data: uncorrectable ECC error
[  731.988376] __nand_correct_data: uncorrectable ECC error
[  731.993781] __nand_correct_data: uncorrectable ECC error
[  731.999532] __nand_correct_data: uncorrectable ECC error
[  732.005455] __nand_correct_data: uncorrectable ECC error
[  732.010793] __nand_correct_data: uncorrectable ECC error
[  732.016555] __nand_correct_data: uncorrectable ECC error
[  732.021893] __nand_correct_data: uncorrectable ECC error
[  732.027539] __nand_correct_data: uncorrectable ECC error
[  732.032897] __nand_correct_data: uncorrectable ECC error
[  732.038530] __nand_correct_data: uncorrectable ECC error
[  732.044317] __nand_correct_data: uncorrectable ECC error
[  732.049658] __nand_correct_data: uncorrectable ECC error
[  732.055362] __nand_correct_data: uncorrectable ECC error
[  732.060698] __nand_correct_data: uncorrectable ECC error
[  732.066331] __nand_correct_data: uncorrectable ECC error
[  732.071667] __nand_correct_data: uncorrectable ECC error
[  732.077302] __nand_correct_data: uncorrectable ECC error
Warning: Bad CRC, using default environment
## Error: "ethaddr" not defined
root@debian:~#





I added the bootlog of the original firmware and the bootlog of usb-startup with error
Attachments:
open | download - putty-original bootlog stora.txt (13.4 KB)
Re: Problem installing Netgear Stora
March 18, 2017 12:54PM
Hi Bodhi,

Can i install safely U-boot with above error.
Do i have to change device-offset in /etc/fw_env.config?

Marvell>>
Marvell>> printenv console
console=console=ttyS0,115200 mtdparts=orion_nand:0x100000@0(uboot),0xff00000@0x100000(root)

root@debian:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00100000 00020000 "uboot"
mtd1: 0ff00000 00020000 "root"

Sorry, for all the questions, but i don't want to make a mistake and break the box. Thanks again.
Erik

root@debian:~# cat /etc/fw_env.config
# Configuration file for fw_(printenv/saveenv) utility.
# Up to two entries are valid, in this case the redundant
# environment sector is assumed present.
# Notice, that the "Number of sectors" is ignored on NOR.

# MTD device name       Device offset   Env. size       Flash sector size       Number of sectors
/dev/mtd0               0xc0000         0x20000         0x20000
Re: Problem installing Netgear Stora
March 18, 2017 03:17PM
Hi Bodhi,

Found this:
Partition table

Other interesting issue related to the use of MTD devices is that there is no partition table, the layout of the disk (MTD memory I mean), is passed to kernel as parameters (PLEASE McWire explain where you pass it).

The original Stora have three partitions:

    -Original-U-BOOT (1Mb)
    -Original-Kernel (6Mb)
    -Original-ROOTFS (249Mb)

# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00100000 00020000 "u-boot"
mtd1: 00600000 00020000 "uImage"
mtd2: 0f900000 00020000 "root"


on: http://www.openstora.com/wiki/index.php?title=How_to_install_your_custom_firmware



I tryed this console command:
Marvell>> setenv  console 'console=ttyS0,115200 mtdparts=orion_nand:0x100000@0(uboot),0x600000@0x100000(uImage),0xf900000@0x100000(root)'

Booting in debian i get than:
root@debian:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00100000 00020000 "uboot"
mtd1: 00600000 00020000 "uImage"
mtd2: 0f900000 00020000 "root"
root@debian:~# cat /proc/cmdline
console=ttyS0,115200 mtdparts=orion_nand:0x100000@0(uboot),0x600000@0x100000(uImage),0xf900000@0x100000(root) root=LABEL=rootfs rootfstype=ext2 rootdelay=10

But with fw_printenv ethaddr i get:
root@debian:~# fw_printenv ethaddr
[  145.116718] __nand_correct_data: uncorrectable ECC error
[  145.122103] __nand_correct_data: uncorrectable ECC error
...
[  147.595031] __nand_correct_data: uncorrectable ECC error
Warning: Bad CRC, using default environment
## Error: "ethaddr" not defined

When i change /etc/fw_env.config
  GNU nano 2.2.6           File: /etc/fw_env.config

# Configuration file for fw_(printenv/saveenv) utility.
# Up to two entries are valid, in this case the redundant
# environment sector is assumed present.
# Notice, that the "Number of sectors" is ignored on NOR.

# MTD device name       Device offset   Env. size       Flash sector size      $
#/dev/mtd0              0xc0000         0x20000         0x20000
/dev/mtd0               0x100000                0x20000         0x20000

And do now a fw_printenv ethaddr
root@debian:~# fw_printenv ethaddr
Cannot read bad block mark: Invalid argument

Is above good.
Please help

Erik
Attachments:
open | download - putty.log (76.6 KB)
Re: Problem installing Netgear Stora
March 18, 2017 03:17PM
Erik,

It looks OK. mtd0 is where it is important. As long as it is correct then you can install u-boot. These NAND ECC errors are shown in some boxes before installating u-boot (old u-boot wrote the envs differently, and you are using newer fw_printenv from the rootfs).

Your bad blocks are OK (in different region away from mtd0):
[    1.843066] Scanning device for bad blocks
[    1.873679] Bad eraseblock 246 at 0x000001ec0000
[    1.920579] Bad eraseblock 640 at 0x000005000000
[    1.931613] Bad eraseblock 700 at 0x000005780000
[    1.936443] Bad eraseblock 702 at 0x0000057c0000
[    2.002018] Bad eraseblock 1270 at 0x000009ec0000
[    2.027547] Bad eraseblock 1464 at 0x00000b700000
[    2.053767] Bad eraseblock 1664 at 0x00000d000000
[    2.064924] Bad eraseblock 1724 at 0x00000d780000
[    2.069815] Bad eraseblock 1726 at 0x00000d7c0000
[    2.078579] Bad eraseblock 1764 at 0x00000dc80000

Your mtd0 looks OK:
root@debian:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00100000 00020000 "uboot"

However, what you should do is: to boot with kwboot before installiing u-boot. As I mentioned in the uboot thread:

Quote

Important Note: If possible, try to test this boot image with UART booting before flashing to NAND. See davygravy's UART booting using kwboot instruction here in this thread. The latest u-boot image released here should be used for UART booting, if your box is the type that supports it (these do not: Dockstar, Pogo E02, iConnect).

If you can use the new u-boot image to boot with kwboot, then the box is unbrickable!

But even if you can't run kwboot to boot this box, it's OK to go ahead and install it.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner



Edited 1 time(s). Last edit at 03/18/2017 04:04PM by bodhi.
Re: Problem installing Netgear Stora
March 18, 2017 03:19PM
Erik,

If you are extra careful, you should adjust the mtdparts in bootargs so that it looks like this in Debian:

# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00100000 00020000 "u-boot"
mtd1: 00400000 00020000 "uImage"
mtd2: 02000000 00020000 "rootfs"
mtd3: 0db00000 00020000 "data"

Note that this definition will not allow you to run stock FW.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner



Edited 1 time(s). Last edit at 03/18/2017 03:21PM by bodhi.
Re: Problem installing Netgear Stora
March 18, 2017 03:33PM
Hi Bodhi,

I have tested on my box version. It is 1.11, so kwboot can not be used. (My box is breakable, so i m extra careful)
Before i start i have one question about the /etc/fw_env.config file;
has the offset to be 0xc0000 --> __nand_correct_data: uncorrectable ECC error
has the offset to be 0x100000 --> Cannot read bad block mark: Invalid argument

Thanks
Erik
Re: Problem installing Netgear Stora
March 18, 2017 04:03PM
Erik,

It should be set to 0xc0000. As stated in the instruction.

has the offset to be 0xc0000 --> __nand_correct_data: uncorrectable ECC error

This error is expected, you can't access this location until after you install new u-boot. Stock u-boot defined envs at a different location.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: Problem installing Netgear Stora
March 19, 2017 12:33PM
Hi Bodhi,

I have installed the new U-boot.
Box is booting into U-boot - happy that, that works, pfff.

I have copyed all environment-parameters into the new uboot, but i think a lot of them can be skipped and deleted.
I want to have the possibility to boot into old Firmware-redhat-linux and to usb.
Both do not boot.
This are mine uboot-enviroment settings:



U-Boot 2016.05-tld-1 (Jun 12 2016 - 13:45:22 -0700)
Netgear-MS2110
gcc (Debian 4.9.2-10) 4.9.2
GNU ld (GNU Binutils for Debian) 2.25
Hit any key to stop autoboot:  0
Netgear Stora>

Netgear Stora> printenv
printenv
CASset=min
MALLOC_len=1
arcNumber=2743
autoload=no
baudrate=115200
bootargs_end=:::DB88FXX81:eth0:none
bootargs_root=ubi.mtd=2,2048 root=ubi0:rootfs rootfstype=ubifs init=/linuxrc
bootcmd=nand read.e 0x800000 0x100000 0x300000; setenv bootargs $(console) $(bootargs_root); bootm 0x800000
bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi
bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi
bootdelay=10
bootdev=usb
console=console=ttyS0,115200 mtdparts=orion_nand: 0x100000@0(uboot),0xff00000@0x100000(root)
device=0:1
devices=usb ide mmc
disL2Cache=no
disL2Prefetch=yes
disaMvPnp=no
disks=0 1 2 3
dtb_file=/boot/dts/kirkwood-netgear_stora_ms2000.dtb
enaAutoRecovery=no
enaCpuStream=no
enaDCPref=yes
enaICPref=yes
enaMonExt=no
enaWrAllo=no
eth1addr=00:50:43:00:02:02
eth1mtu=1500
ethact=egiga0
ethaddr=00:50:43:00:02:02
ethprime=egiga1
fw_up=disable
hddPowerCtrl=no
if_netconsole=ping $serverip
image_name=uImage
ipaddr=192.168.1.188
led_error=orange blinking
led_exit=green off
led_init=green blinking
load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file
load_dtb_addr=0x1c00000
load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd
load_initrd_addr=0x1100000
load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage
load_uimage_addr=0x800000
loadaddr=0x02000000
loads_echo=0
loidaddr=0x02000000
mainlineLinux=yes
mtdids=nand0=orion_nand
mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs
nandEcc=1bit
nc_ready=1
ncip=192.168.1.195
netbsd_en=no
netmask=255.255.255.0
netretry=no
partition=nand0,2
pexMode=RC
preboot=run preboot_nc
preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi
rcvrip=169.254.100.100
rootpath=/MNT/ARM_FS/
sata_dma_mode=yes
scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start";  setenv scan_ide "ide reset";  setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done
serverip=192.168.1.195
setL2CacheWT=yes
set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;\
ethmtu=1500
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;
stderr=nc
stdin=nc
stdout=nc
ubifs_bootcmd=nand read.e 0x800000 0x100000 0x300000; setenv bootargs $(console) $(bootargs_root); bootm 0x800000
uenv_addr=0x810000
uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize
uenv_init_devices=setenv init_usb "usb start";  setenv init_ide "ide reset";  setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done;
uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices;  do for disknum in 0; do run uenv_read_disk; done; done;
uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi
uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read;  fi; else if $devtype part $disknum; then run uenv_read; fi;  fi
usb0Mode=host
usb_boot=run load_dtb; run load_uimage; if run load_initrd; then bootm 0x800000 0x1100000 0x1c00000; else bootm 0x800000 - 0x1c00000; fi
usb_bootcmd=usb start; run usb_init; run usb_set_bootargs; run usb_boot
usb_device=0:1
usb_init=setenv test=1
usb_load_uimage=ext2load usb 0:1 0x800000 /boot/uImage
usb_load_uinitrd=ext2load usb 0:1 0x1100000 /boot/uInitrd
usb_ready_retry=15
usb_root=LABEL=rootfs
usb_rootdelay=10
usb_rootfstype=ext2
usb_set_bootargs=setenv bootargs $(console) root=$(usb_root) rootfstype=$(usb_rootfstype) rootdelay=$(usb_rootdelay)
vxworks_en=no
yuk_ethaddr=00:00:00:EE:51:81

Environment size: 4872/131068 bytes
Netgear Stora>



This is the bootoutput from putty - old enviroment:

U-Boot 2016.05-tld-1 (Jun 12 2016 - 13:45:22 -0700)
Netgear-MS2110

SoC:   Kirkwood 88F6281_A0
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
PHY reset timed out
88E1116 Initialized on egiga0
Using egiga0 device
host 192.168.1.195 is alive
Using egiga0 device
host 192.168.1.195 is alive
Using egiga0 device
host 192.168.1.195 is alive
Using egiga0 device
host 192.168.1.195 is alive
Using egiga0 device
host 192.168.1.195 is alive
Uncompressing Linux............................................................................................................................................................ done, booting the kernel.



And this is the output van nc:

U-Boot 2016.05-tld-1 (Jun 12 2016 - 13:45:22 -0700)
Netgear-MS2110
gcc (Debian 4.9.2-10) 4.9.2
GNU ld (GNU Binutils for Debian) 2.25
Hit any key to stop autoboot:  0

NAND read: device 0 offset 0x100000, size 0x300000
 3145728 bytes read: OK
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-2.6.22.18-Netgear
   Created:      2010-06-13  23:54:53 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2788728 Bytes = 2.7 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK


Starting kernel ...






For the usb-boot thinks look like this:
Output of putty:


U-Boot 2016.05-tld-1 (Jun 12 2016 - 13:45:22 -0700)
Netgear-MS2110

SoC:   Kirkwood 88F6281_A0
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
PHY reset timed out
88E1116 Initialized on egiga0
Using egiga0 device
host 192.168.1.195 is alive
Using egiga0 device
host 192.168.1.195 is alive
Using egiga0 device
host 192.168.1.195 is alive
Using egiga0 device
host 192.168.1.195 is alive
Using egiga0 device
host 192.168.1.195 is alive
Uncompressing Linux... done, booting the kernel.



Output of nc:

U-Boot 2016.05-tld-1 (Jun 12 2016 - 13:45:22 -0700)
Netgear-MS2110
gcc (Debian 4.9.2-10) 4.9.2
GNU ld (GNU Binutils for Debian) 2.25
Hit any key to stop autoboot:  9
 0

Netgear Stora> run usb_bootcmd
run usb_bootcmd
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices...
Use USB retry period from the environment: 15 second(s)
1 Storage Device(s) found
## Error: illegal character '='in variable name "test=1"
loading DTB /boot/dts/kirkwood-netgear_stora_ms2000.dtb ...
11849 bytes read in 918 ms (11.7 KiB/s)
loading uImage ...
3154896 bytes read in 640 ms (4.7 MiB/s)
loading uInitrd ...
7179935 bytes read in 688 ms (10 MiB/s)
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-4.4.0-kirkwood-tld-1
   Created:      2016-02-19   5:55:25 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3154832 Bytes = 3 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
   Image Name:   initramfs-4.4.0-kirkwood-tld-1
   Created:      2016-02-19   7:33:04 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    7179871 Bytes = 6.8 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01c00000
   Booting using the fdt blob at 0x1c00000


Starting kernel ...


I'm using the 4.4.0 filesystem with kernel.
I have done the (because of the new uboot):
mv uImage --> uImage.netgear
mv uImage.orig uImage

Can you help me?
Thanks

Erik
Re: Problem installing Netgear Stora
March 19, 2017 05:33PM
Erik,

Glad that you have the new u-boot installed!

Netconsole does not output more than what you saw. It always stops at
Starting kernel ...
There is no output after this. Unless you set it up further in Debian.

So try to find the Stora in the network. Are you using DHCP (the 4.4 rootfs default settings for ethernet)?
- ping debian.local
- look for a new IP appear in the router or use scanning app to find such IP.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: Problem installing Netgear Stora
March 19, 2017 06:22PM
Hi Bodhi,

I have also an serial cable (putty on com1) also stops at Starting kernel ...
-1- Should i not get info using serial console, or do i have to set envir parameters for that (stdin/stdout/stderr -- otherwords disable nc?)
-2- I looked at my router. It gives a green v when a ip adress is used. I could not find a not known ip-address. Tryed all the ip-addresses but get not an answer back. I will set a fixed ip-address tomorrow.
-3- Did also the ping
debian.local, ---> ping: unknown host debian.local
debian.priv ---> ping: unknown host debian.priv
debian.lan --> ping: unknown host debian.lan

I think it is not booting at all - i think i have to change something.
Any ideas?

Erik



Edited 1 time(s). Last edit at 03/19/2017 06:25PM by Erik.
Re: Problem installing Netgear Stora
March 19, 2017 07:34PM
Erik,

If you have serial console then don't use nc. Connect serial console and power up.

Interrupt netconsole and

setenv preboot
saveenv
reset
Let it boot.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: Problem installing Netgear Stora
March 20, 2017 05:10AM
Hi Bodhi,

Thanks !

I have done:

>>Interrupt netconsole and

>>setenv preboot
>>saveenv
>>reset

>>Let it boot.

I have now all my output again on my serial console !

When i try to boot stock Firmware, it gives:

U-Boot 2016.05-tld-1 (Jun 12 2016 - 13:45:22 -0700)
Netgear-MS2110

SoC:   Kirkwood 88F6281_A0
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
PHY reset timed out
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0

NAND read: device 0 offset 0x100000, size 0x300000
 3145728 bytes read: OK
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-2.6.22.18-Netgear
   Created:      2010-06-13  23:54:53 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2788728 Bytes = 2.7 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK

Starting kernel ...

Uncompressing Linux............................................................................................................................................................ done, booting the kernel.


When i try to boot usb, i get:
U-Boot 2016.05-tld-1 (Jun 12 2016 - 13:45:22 -0700)
Netgear-MS2110

SoC:   Kirkwood 88F6281_A0
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
PHY reset timed out
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0
Netgear Stora>
Netgear Stora> run usb_bootcmd
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices...
Use USB retry period from the environment: 15 second(s)
1 Storage Device(s) found
loading DTB /boot/dts/kirkwood-netgear_stora_ms2000.dtb ...
11849 bytes read in 917 ms (11.7 KiB/s)
loading uImage ...
3154896 bytes read in 640 ms (4.7 MiB/s)
loading uInitrd ...
7179935 bytes read in 687 ms (10 MiB/s)
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-4.4.0-kirkwood-tld-1
   Created:      2016-02-19   5:55:25 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3154832 Bytes = 3 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
   Image Name:   initramfs-4.4.0-kirkwood-tld-1
   Created:      2016-02-19   7:33:04 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    7179871 Bytes = 6.8 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01c00000
   Booting using the fdt blob at 0x1c00000
   Loading Kernel Image ... OK
   Loading Ramdisk to 03927000, end 03fffe5f ... OK
   Loading Device Tree to 03921000, end 03926e48 ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

These are mine enviroment settings:
Netgear Stora>
Netgear Stora> printenv
CASset=min
MALLOC_len=1
arcNumber=2743
autoload=no
baudrate=115200
bootargs=$(console) root=$(usb_root) rootfstype=$(usb_rootfstype) rootdelay=$(usb_rootdelay)
bootargs_end=:::DB88FXX81:eth0:none
bootargs_root=ubi.mtd=2,2048 root=ubi0:rootfs rootfstype=ubifs init=/linuxrc
bootcmd=nand read.e 0x800000 0x100000 0x300000; setenv bootargs $(console) $(bootargs_root); bootm 0x800000
bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi
bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi
bootdelay=10
bootdev=usb
console=console=ttyS0,115200 mtdparts=orion_nand: 0x100000@0(uboot),0xff00000@0x100000(root)
device=0:1
devices=usb ide mmc
disL2Cache=no
disL2Prefetch=yes
disaMvPnp=no
disks=0 1 2 3
dtb_file=/boot/dts/kirkwood-netgear_stora_ms2000.dtb
enaAutoRecovery=no
enaCpuStream=no
enaDCPref=yes
enaICPref=yes
enaMonExt=no
enaWrAllo=no
eth1addr=00:50:43:00:02:02
eth1mtu=1500
ethact=egiga0
ethaddr=00:50:43:00:02:02
ethprime=egiga1
fw_up=disable
hddPowerCtrl=no
if_netconsole=ping $serverip
image_name=uImage
ipaddr=192.168.1.188
led_error=orange blinking
led_exit=green off
led_init=green blinking
load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file
load_dtb_addr=0x1c00000
load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd
load_initrd_addr=0x1100000
load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage
load_uimage_addr=0x800000
loadaddr=0x02000000
loads_echo=0
loidaddr=0x02000000
mainlineLinux=yes
mtdids=nand0=orion_nand
mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs
nandEcc=1bit
nc_ready=1
ncip=192.168.1.195
netbsd_en=no
netmask=255.255.255.0
netretry=no
partition=nand0,2
pexMode=RC
preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi
rcvrip=169.254.100.100
rootpath=/MNT/ARM_FS/
sata_dma_mode=yes
scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start";  setenv scan_ide "ide reset";  setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done
serverip=192.168.1.195
setL2CacheWT=yes
set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;\
ethmtu=1500
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;
stderr=serial
stdin=serial
stdout=serial
ubifs_bootcmd=nand read.e 0x800000 0x100000 0x300000; setenv bootargs $(console) $(bootargs_root); bootm 0x800000
uenv_addr=0x810000
uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize
uenv_init_devices=setenv init_usb "usb start";  setenv init_ide "ide reset";  setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done;
uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices;  do for disknum in 0; do run uenv_read_disk; done; done;
uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi
uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read;  fi; else if $devtype part $disknum; then run uenv_read; fi;  fi
usb0Mode=host
usb_boot=run load_dtb; run load_uimage; if run load_initrd; then bootm 0x800000 0x1100000 0x1c00000; else bootm 0x800000 - 0x1c00000; fi
usb_bootcmd=usb start; run usb_init; run usb_set_bootargs; run usb_boot
usb_device=0:1
usb_init=setenv test
usb_load_uimage=ext2load usb 0:1 0x800000 /boot/uImage
usb_load_uinitrd=ext2load usb 0:1 0x1100000 /boot/uInitrd
usb_ready_retry=15
usb_root=LABEL=rootfs
usb_rootdelay=10
usb_rootfstype=ext2
usb_set_bootargs=setenv bootargs $(console) root=$(usb_root) rootfstype=$(usb_rootfstype) rootdelay=$(usb_rootdelay)
vxworks_en=no
yuk_ethaddr=00:00:00:EE:51:81

Environment size: 4952/131068 bytes
Netgear Stora>

I have changed /etc/network/interfaces, to a static ip.
But i can not connect to the ip-adress with putty.
Ping gives: Request timed out.

So i think box is not starting.
(If it was i expetcted a bootlog [......] starting ok, which did not show up !)
Re: Problem installing Netgear Stora
March 20, 2017 07:41AM
Hi Bodhi,

If i do:
run scan_disk
setenv bootargs 'rootfstype=ext2 rootdelay=10 root=LABEL=rootfs $(console)'
run bootcmd_exec

then the box starts
I can change the rootdelay in the command from: 10 to $(usb_rootdelay) or to $usb_rootdelay,
than the box starts. Any other change and the box hangs. (Uncompressing Linux... done, booting the kernel. -- and nothing). I have re-entered the values with single and double quotes - no difference.

Here the output when i start with real values...


U-Boot 2016.05-tld-1 (Jun 12 2016 - 13:45:22 -0700)
Netgear-MS2110

SoC:   Kirkwood 88F6281_A0
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
PHY reset timed out
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0
Netgear Stora>
Netgear Stora>
Netgear Stora> run scan_disk
running scan_disk ...
Scan device usb
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices...
Use USB retry period from the environment: 15 second(s)
1 Storage Device(s) found
device usb 0:1
1 bytes read in 444 ms (0 Bytes/s)
Found bootable drive on usb 0
Netgear Stora>  setenv bootargs 'rootfstype=ext2 rootdelay=10 root=LABEL=rootfs $(console)'
Netgear Stora>  run bootcmd_exec
loading uImage ...
3154896 bytes read in 532 ms (5.7 MiB/s)
loading uInitrd ...
7179935 bytes read in 687 ms (10 MiB/s)
loading DTB /boot/dts/kirkwood-netgear_stora_ms2000.dtb ...
11849 bytes read in 812 ms (13.7 KiB/s)
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-4.4.0-kirkwood-tld-1
   Created:      2016-02-19   5:55:25 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3154832 Bytes = 3 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
   Image Name:   initramfs-4.4.0-kirkwood-tld-1
   Created:      2016-02-19   7:33:04 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    7179871 Bytes = 6.8 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01c00000
   Booting using the fdt blob at 0x1c00000
   Loading Kernel Image ... OK
   Loading Ramdisk to 03927000, end 03fffe5f ... OK
   Loading Device Tree to 03921000, end 03926e48 ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

Debian GNU/Linux 8 debian ttyS0

debian login:

Any ideas...
Re: Problem installing Netgear Stora
March 20, 2017 10:32AM
Hi Bodhi,

Other question "How do i make this autostart and as last resort start with FW?'
Thanks

Erik
Re: Problem installing Netgear Stora
March 20, 2017 01:17PM
Hi Bodhi,

if i do a
run scan_disk
run set_bootargs and
run bootcmd_exec

than usb is starting correctly.

FW is not starting. There is a line in console about mtdparts, is this enough?
I tryed run bootcmd....


Netgear Stora> printenv
CASset=min
MALLOC_len=1
arcNumber=2743
autoload=no
baudrate=115200
bootargs_end=:::DB88FXX81:eth0:none
bootargs_root=ubi.mtd=2,2048 root=ubi0:rootfs rootfstype=ubifs $mtdparts init=/linuxrc
bootcmd=nand read.e 0x800000 0x100000 0x300000; setenv bootargs $(console) $(bootargs_root); bootm 0x800000
bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi
bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi
bootdelay=10
bootdev=usb
console=console=ttyS0,115200 mtdparts=orion_nand: 0x100000@0(uboot),0xff00000@0x100000(root)
device=0:1
devices=usb ide mmc
disL2Cache=no
disL2Prefetch=yes
disaMvPnp=no
disks=0 1 2 3
dtb_file=/boot/dts/kirkwood-netgear_stora_ms2000.dtb
enaAutoRecovery=no
enaCpuStream=no
enaDCPref=yes
enaICPref=yes
enaMonExt=no
enaWrAllo=no
eth1addr=00:50:43:00:02:02
eth1mtu=1500
ethact=egiga0
ethaddr=00:50:43:00:02:02
ethprime=egiga1
fw_up=disable
hddPowerCtrl=no
if_netconsole=ping $serverip
image_name=uImage
ipaddr=192.168.1.188
led_error=orange blinking
led_exit=green off
led_init=green blinking
load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file
load_dtb_addr=0x1c00000
load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd
load_initrd_addr=0x1100000
load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage
load_uimage_addr=0x800000
loadaddr=0x02000000
loads_echo=0
mainlineLinux=yes
mtdids=nand0=orion_nand
mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs
nandEcc=1bit
nc_ready=1
ncip=192.168.1.195
netbsd_en=no
netmask=255.255.255.0
netretry=no
partition=nand0,2
pexMode=RC
preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi
rcvrip=169.254.100.100
rootpath=/MNT/ARM_FS/
sata_dma_mode=yes
scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start";  setenv scan_ide "ide reset";  setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done
serverip=192.168.1.195
setL2CacheWT=yes
set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;\
ethmtu=1500
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;
stderr=serial
stdin=serial
stdout=serial
ubifs_bootcmd=nand read.e 0x800000 0x100000 0x300000; setenv bootargs $(console) $(bootargs_root); bootm 0x800000
uenv_addr=0x810000
uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize
uenv_init_devices=setenv init_usb "usb start";  setenv init_ide "ide reset";  setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done;
uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices;  do for disknum in 0; do run uenv_read_disk; done; done;
uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi
uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read;  fi; else if $devtype part $disknum; then run uenv_read; fi;  fi
usb0Mode=host
usb_boot=run load_dtb; run load_uimage; if run load_initrd; then bootm 0x800000 0x1100000 0x1c00000; else bootm 0x800000 - 0x1c00000; fi
usb_bootcmd=usb start; run usb_init; run usb_set_bootargs; run usb_boot
usb_device=0:1
usb_init=setenv test
usb_load_uimage=ext2load usb 0:1 0x800000 /boot/uImage
usb_load_uinitrd=ext2load usb 0:1 0x1100000 /boot/uInitrd
usb_ready_retry=15
usb_root=LABEL=rootfs
usb_rootdelay=10
usb_rootfstype=ext2
usb_set_bootargs==setenv bootargs $(console root=LABEL=rootfs rootfstype=ext2 rootdelay=10 $mtdparts
vxworks_en=no
yuk_ethaddr=00:00:00:EE:51:81

Environment size: 4829/131068 bytes

Re: Problem installing Netgear Stora
March 20, 2017 02:43PM
Erik,

> if i do a
> run scan_disk
> run set_bootargs and
> run bootcmd_exec
>
> than usb is starting correctly.

Great! meaning you've resolve the problem with the envs.

>
> FW is not starting.

To boot back to stock FW in NAND, further set up is needed.

>There is a line in console abo
> ut mtdparts, is this enough?

The mtdparts should be whatever you had in stock envs before.

mtdparts=orion_nand: 0x100000@0(uboot),0xff00000@0x100000(root)
But the above was not stock u-boot definition, it must have been modified already. Can you find what was mtdparts in stock u-boot?

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: Problem installing Netgear Stora
March 20, 2017 03:40PM
Hi Bodi,

I have another stora - looks the same is a version 1.21.
This is the printout of the enviroment.
But so as you see, there is nothing after "console=console=ttyS0,115200"

         __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_
| | | |___|  _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
 \___/    |____/ \___/ \___/ \__|
 ** MARVELL BOARD: RD-88F6281A LE

U-Boot 1.1.4 (Sep  4 2009 - 09:36:11) Marvell version: 3.4.14

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE60

Soc: MV88F6281 Rev 3 (DDR2)
CPU running @ 1000Mhz L2 running @ 333Mhz
SysClock = 333Mhz , TClock = 200Mhz

DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000   size  64MB
DRAM CS[1] base 0x04000000   size  64MB
DRAM Total size 128MB  16bit width
Flash:  0 kB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:256 MB
CRC in Flash: 78abcfd3, Calculated CRC: 78abcfd3

CPU : Marvell Feroceon (Rev 1)

Streaming disabled
Write allocate disabled

Module 0 is RGMII
Module 1 is TDM

USB 0: host mode
PEX 0: interface detected no Link.
Net:   egiga0, egiga1 [PRIME]
Hit any key to stop autoboot:  0
Marvell>>
Marvell>>
Marvell>>
Marvell>>
Marvell>>
Marvell>>
Marvell>>
Marvell>>
Marvell>>
Marvell>> printenv console
console=console=ttyS0,115200
Marvell>> printenv
baudrate=115200
loads_echo=0
ipaddr=10.4.50.165
serverip=10.4.50.5
rootpath=/mnt/ARM_FS/
netmask=255.255.255.0
CASset=min
MALLOC_len=1
ethprime=egiga1
bootargs_end=:::DB88FXX81:eth0:none
image_name=uImage
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;
ethmtu=1500
eth1addr=00:50:43:00:02:02
eth1mtu=1500
mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
usb0Mode=host
yuk_ethaddr=00:00:00:EE:51:81
nandEcc=1bit
netretry=no
rcvrip=169.254.100.100
loidaddr=0x02000000
autoload=no
bootargs_root=ubi.mtd=2,2048 root=ubi0:rootfs rootfstype=ubifs init=/linuxrc
console=console=ttyS0,115200
mainlineLiNux=no
fw_up=disable
bootcmd=nand read.e 0x800000 0x100000 0x300000; setenv bootargs $(console) $(bootargs_root); bootm 0x800000
ethaddr=C0:3F:0E:B0:F2:91
stdin=serial
stdout=serial
stderr=serial
mainlineLinux=no
enaMonExt=no
enaCpuStream=no
enaWrAllo=no
pexMode=RC
disL2Cache=no
setL2CacheWT=yes
disL2Prefetch=yes
enaICPref=yes
enaDCPref=yes
sata_dma_mode=yes
netbsd_en=no
vxworks_en=no
bootdelay=3
disaMvPnp=no
hddPowerCtrl=no
loadaddr=0x02000000
enaAutoRecovery=no
ethact=egiga1

The only thing i see is this:
Creating 3 MTD partitions on "nand_mtd":
0x00000000-0x00100000 : "u-boot"
0x00100000-0x00700000 : "uImage"
0x00700000-0x10000000 : "root"

So: uboot starts at 0 is 1M in size, uImage, starts at 1M and is 6M in size, Root starts at 7M and is 249M in size.
If i use 0-1M for uboot and rest as root, than are the borders the same. Should work, Why does it not.

I can try without anything, maybe that helps...

Greetings

Erik
Re: Problem installing Netgear Stora
March 20, 2017 07:38PM
Erik Wrote:
-------------------------------------------------------
> Hi Bodi,
>
> I have another stora - looks the same is a version
> 1.21.
> This is the printout of the enviroment.
> But so as you see, there is nothing after "console
> =console=ttyS0,115200"
>
>
> __  __                      _ _
> |  \/  | __ _ _ ____   _____| | |
> | |\/| |/ _` | '__\ \ / / _ \ | |
> | |  | | (_| | |   \ V /  __/ | |
> |_|  |_|\__,_|_|    \_/ \___|_|_|
> _   _     ____              _
> | | | |   | __ )  ___   ___ | |_
> | | | |___|  _ \ / _ \ / _ \| __|
> | |_| |___| |_) | (_) | (_) | |_
> \___/    |____/ \___/ \___/ \__|
> ** MARVELL BOARD: RD-88F6281A LE
> 
> U-Boot 1.1.4 (Sep  4 2009 - 09:36:11) Marvell vers
> ion: 3.4.14
> 
> U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE6
> 0
> 
> Soc: MV88F6281 Rev 3 (DDR2)
> CPU running @ 1000Mhz L2 running @ 333Mhz
> SysClock = 333Mhz , TClock = 200Mhz
> 
> DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
> DRAM CS[0] base 0x00000000   size  64MB
> DRAM CS[1] base 0x04000000   size  64MB
> DRAM Total size 128MB  16bit width
> Flash:  0 kB
> Addresses 8M - 0M are saved for the U-Boot usage.
> Mem malloc Initialization (8M - 7M): Done
> NAND:256 MB
> CRC in Flash: 78abcfd3, Calculated CRC: 78abcfd3
> 
> CPU : Marvell Feroceon (Rev 1)
> 
> Streaming disabled
> Write allocate disabled
> 
> Module 0 is RGMII
> Module 1 is TDM
> 
> USB 0: host mode
> PEX 0: interface detected no Link.
> Net:   egiga0, egiga1 [PRIME]
> Hit any key to stop autoboot:  0
> Marvell>>
> Marvell>>
> Marvell>>
> Marvell>>
> Marvell>>
> Marvell>>
> Marvell>>
> Marvell>>
> Marvell>>
> Marvell>> printenv console
> console=console=ttyS0,115200
> Marvell>> printenv
> baudrate=115200
> loads_echo=0
> ipaddr=10.4.50.165
> serverip=10.4.50.5
> rootpath=/mnt/ARM_FS/
> netmask=255.255.255.0
> CASset=min
> MALLOC_len=1
> ethprime=egiga1
> bootargs_end=:::DB88FXX81:eth0:none
> image_name=uImage
> standalone=fsload 0x2000000 $(image_name);setenv b
> ootargs $(console) root=/dev/mtdblock0 rw ip=$(ipa
> ddr):$(serverip)$(bootargs_end) $(mvPhoneConfig);
> bootm 0x2000000;
> ethmtu=1500
> eth1addr=00:50:43:00:02:02
> eth1mtu=1500
> mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs
> mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2
> :3),mtu=1500
> usb0Mode=host
> yuk_ethaddr=00:00:00:EE:51:81
> nandEcc=1bit
> netretry=no
> rcvrip=169.254.100.100
> loidaddr=0x02000000
> autoload=no
> bootargs_root=ubi.mtd=2,2048 root=ubi0:rootfs root
> fstype=ubifs init=/linuxrc
> console=console=ttyS0,115200
> mainlineLiNux=no
> fw_up=disable
> bootcmd=nand read.e 0x800000 0x100000 0x300000; se
> tenv bootargs $(console) $(bootargs_root); bootm 0
> x800000
> ethaddr=C0:3F:0E:B0:F2:91
> stdin=serial
> stdout=serial
> stderr=serial
> mainlineLinux=no
> enaMonExt=no
> enaCpuStream=no
> enaWrAllo=no
> pexMode=RC
> disL2Cache=no
> setL2CacheWT=yes
> disL2Prefetch=yes
> enaICPref=yes
> enaDCPref=yes
> sata_dma_mode=yes
> netbsd_en=no
> vxworks_en=no
> bootdelay=3
> disaMvPnp=no
> hddPowerCtrl=no
> loadaddr=0x02000000
> enaAutoRecovery=no
> ethact=egiga1
> 
> 
>
>
> The only thing i see is this:
>
> Creating 3 MTD partitions on "nand_mtd":
> 0x00000000-0x00100000 : "u-boot"
> 0x00100000-0x00700000 : "uImage"
> 0x00700000-0x10000000 : "root"
> 
>
>
> So: uboot starts at 0 is 1M in size, uImage, start
> s at 1M and is 6M in size, Root starts at 7M and i
> s 249M in size.
> If i use 0-1M for uboot and rest as root, than are
> the borders the same. Should work, Why does it not
> .
>
> I can try without anything, maybe that helps...
>
> Greetings
>
> Erik

Yes. Your calculation is correct. It should work.

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Re: Problem installing Netgear Stora
March 23, 2017 03:21PM
Hi Bodhi,

I tryed to get old firmware started, with different mdtparts, without, different configs, with and without old uboot params, but after decompressing it is not working. There are plenty of errors where the booting can stop and because i don't know the errors - nothing is reported to the console - the changes are slim to get it started.

So i want to replace existing md1/md2 partitions and fill this with a working version of linux.
So i'm currious if there is a build kernel and filesystem for in the nand. Do you know and were to find Howto.

Can i use the rescue system for this and is het tested on netgear stora

Thanks verry much for the info

Erik
Re: Problem installing Netgear Stora
March 23, 2017 04:35PM
Erik,

> I tryed to get old firmware started, with differen
> t mdtparts, without, different configs, with and w
> ithout old uboot params, but after decompressing i
> t is not working. There are plenty of errors where
> the booting can stop and because i don't know the
> errors - nothing is reported to the console - the
> changes are slim to get it started.

I would suggest that you back up all the mtds. In case you want to try to go back to stock later to use it as rescue system, or if you want to sell the box.

>
> So i want to replace existing md1/md2 partitions a
> nd fill this with a working version of linux.
> So i'm currious if there is a build kernel and fil
> esystem for in the nand. Do you know and were to f
> ind Howto.
>
> Can i use the rescue system for this and is het te
> sted on netgear stora
>

Is your purpose just a rescue system (to fall back in case the rootfs is corrupted and box will boot into that system).

The rescue system from Jeff/davygravy has not been tested on the Stora. I would have to refresh my memory about the Stora to say if it might work or not :)

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: