Debian on Netgear RN102
Posted by whitepawn
|
Re: Debian on Netgear RN102 November 22, 2020 03:45PM |
Admin Registered: 13 years ago Posts: 18,543 |
Trond & whitepawn,
> If you build it for RN102 too, I'll be happy to
> test it.
It is the same kernel built for both boxes as before:
https://forum.doozan.com/read.php?2,92514
> Driver of g762 fan control chip seems not included
> in kernel i guess.
It is in the kernel 5.8.5-mvebu-370xp-tld-1 as a loadable module. So try
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> If you build it for RN102 too, I'll be happy to
> test it.
It is the same kernel built for both boxes as before:
https://forum.doozan.com/read.php?2,92514
> Driver of g762 fan control chip seems not included
> in kernel i guess.
It is in the kernel 5.8.5-mvebu-370xp-tld-1 as a loadable module. So try
modprobe g762
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Debian on Netgear RN102 November 23, 2020 02:12PM |
Registered: 6 years ago Posts: 157 |
Hi bodhi,
I added 'lm75' and 'g762' to '/etc/initramfs-tools/modules' and, as 'root', did
Checked!
Looking forward to test a kernel with the "danitool" patch.
Regards,
Trond Melen
I added 'lm75' and 'g762' to '/etc/initramfs-tools/modules' and, as 'root', did
update-initramfs -u (cd /boot && mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-5.8.5-mvebu-tld-1 -d initrd.img-5.8.5-mvebu-370xp-tld-1 uInitrd)to update the initial ram file system. Installed 'lm-sensors' and 'fancontrol', and ran 'pwmconfig'. Ended up with this configuration in '/etc/fancontrol':
# Configuration file generated by pwmconfig, changes will be lost INTERVAL=2 DEVPATH=hwmon0=devices/virtual/thermal/thermal_zone0 hwmon1=devices/platform/soc/soc:internal-regs/d0011000.i2c/i2c-0/0-003e DEVNAME=hwmon0=d0018300.thermal hwmon1=g762 FCTEMPS= hwmon1/pwm1=hwmon0/temp1_input FCFANS= hwmon1/pwm1=hwmon1/fan1_input MINTEMP= hwmon1/pwm1=50 MAXTEMP= hwmon1/pwm1=80 MINSTART= hwmon1/pwm1=60 MINSTOP= hwmon1/pwm1=60 MINPWM=hwmon1/pwm1=60 MAXPWM= hwmon1/pwm1=200which, at normal room temperature, makes the fan run more or less noiseless at about 975 rpm when the box is idle, and at at about 1300 rpm when it's really busy. Didn't test with disks installed, though. 'fancotrol' is stared by 'init' by default when 'pwmconfig' has generated a configuration.
Checked!
Looking forward to test a kernel with the "danitool" patch.
Regards,
Trond Melen
|
Re: Debian on Netgear RN102 November 23, 2020 03:57PM |
Admin Registered: 13 years ago Posts: 18,543 |
> run more or less noiseless at about 975 rpm when
> the box is idle, and at at about 1300 rpm when
> it's really busy. Didn't test with disks
> installed, though. 'fancotrol' is stared by 'init'
> by default when 'pwmconfig' has generated a
> configuration.
>
> Checked!
Cool!
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> the box is idle, and at at about 1300 rpm when
> it's really busy. Didn't test with disks
> installed, though. 'fancotrol' is stared by 'init'
> by default when 'pwmconfig' has generated a
> configuration.
>
> Checked!
Cool!
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Debian on Netgear RN102 November 26, 2020 04:30PM |
Admin Registered: 13 years ago Posts: 18,543 |
Please see:
https://forum.doozan.com/read.php?2,92514,111834#msg-111834
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
https://forum.doozan.com/read.php?2,92514,111834#msg-111834
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Debian on Netgear RN102 November 29, 2020 01:33PM |
Registered: 4 years ago Posts: 73 |
Hi guys again,
I was very busy with life, sorry didn't post anything useful.
Today i quickly tried with another router and also direct connection with static ip.It didn't improve network speed.
It seems many developments are made will read forum.
BTW can i quickly return to stock firmware?Which envs i must use?
Regards.
I was very busy with life, sorry didn't post anything useful.
Today i quickly tried with another router and also direct connection with static ip.It didn't improve network speed.
It seems many developments are made will read forum.
BTW can i quickly return to stock firmware?Which envs i must use?
Regards.
|
Re: Debian on Netgear RN102 November 29, 2020 03:03PM |
Registered: 6 years ago Posts: 157 |
Nice to hear from you again, whitepawn!
You still have stock U-boot on your RN102, so you should be able to activate the 'Bootmenu' and select "Factory Default" or "OS reinstall" as described here. Since the RN102 has no display, you need to check the LEDs against the table in the Hardware Manual to know when to hit the Backup button.
I believe the RN102 has been obsoleted, so don't think you can get any support from Netgear any longer. So if 'Bootmanu' fails, you need to find someone who can clone a recovery USB stick for you. I'm sorry, I don't have any.
Regards,
Trond Melen
Quote
BTW can i quickly return to stock firmware?
You still have stock U-boot on your RN102, so you should be able to activate the 'Bootmenu' and select "Factory Default" or "OS reinstall" as described here. Since the RN102 has no display, you need to check the LEDs against the table in the Hardware Manual to know when to hit the Backup button.
I believe the RN102 has been obsoleted, so don't think you can get any support from Netgear any longer. So if 'Bootmanu' fails, you need to find someone who can clone a recovery USB stick for you. I'm sorry, I don't have any.
Regards,
Trond Melen
|
Re: Debian on Netgear RN102 November 30, 2020 12:54PM |
Registered: 4 years ago Posts: 73 |
Hi tme nice to see you again!
I have tried factory reset as described.Didn't help but i have original backup for env partition i will try with nandwrite original envs partition.
I have read all new kernel information and L2 cache thing, great work.Will try new kernel but it seems it have network issues as right now i believe.
Regards.
I have tried factory reset as described.Didn't help but i have original backup for env partition i will try with nandwrite original envs partition.
I have read all new kernel information and L2 cache thing, great work.Will try new kernel but it seems it have network issues as right now i believe.
Regards.
|
Re: Debian on Netgear RN102 November 30, 2020 03:11PM |
Admin Registered: 13 years ago Posts: 18,543 |
whitepawn,
This tld-2 version is the latest test version.
https://forum.doozan.com/read.php?2,92514,111984#msg-111984
I will upload tld-3 version shortly.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
This tld-2 version is the latest test version.
https://forum.doozan.com/read.php?2,92514,111984#msg-111984
I will upload tld-3 version shortly.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Debian on Netgear RN102 December 03, 2020 06:35AM |
Registered: 4 years ago Posts: 73 |
Hi Bodhi,
I have tried with your tld3 version with fresh install on my RN102.Network speed is improved significantly thank you.Now i can get 669 Mbits/sec.But i cannot figured out why i am not getting 900Mbits/sec.Here is my logs:
Client Side:
Server Side:(RN102)
I have tried with brand new mi 4a gigabit router.Here is my connection diagram.
RN102----CAT6 Cable----Mi 4A Gigabit-----CAT6 Cable----Xeon Desktop
@tme
Could you please try tld3 version with iperf?I want to make sure if my setup is wrong or not.
Regards all.
I have tried with your tld3 version with fresh install on my RN102.Network speed is improved significantly thank you.Now i can get 669 Mbits/sec.But i cannot figured out why i am not getting 900Mbits/sec.Here is my logs:
Client Side:
jigsaw@whitepawnxeon:~$ ethtool -a enp2s0 Pause parameters for enp2s0: Autonegotiate: on RX: on TX: on jigsaw@whitepawnxeon:~$ ethtool enp2s0 Settings for enp2s0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: Symmetric Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: off (auto) Cannot get wake-on-lan settings: Operation not permitted Current message level: 0x00000007 (7) drv probe link Link detected: yes jigsaw@whitepawnxeon:~$ iperf -s bind failed: Address already in use jigsaw@whitepawnxeon:~$ iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.31.221 port 5001 connected with 192.168.31.29 port 40140 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.9 sec 870 MBytes 669 Mbits/sec ------------------------------------------------------------ Client connecting to 192.168.31.29, TCP port 5001 TCP window size: 442 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.31.221 port 35046 connected with 192.168.31.29 port 5001 [ 4] 0.0-10.0 sec 344 MBytes 288 Mbits/sec ^Cjigsaw@whitepawnxeon:~$ iperf -c 192.168.31.29 -r write failed: Connection reset by peer ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ ------------------------------------------------------------ Client connecting to 192.168.31.29, TCP port 5001 TCP window size: 170 KByte (default) ------------------------------------------------------------ [ 5] local 192.168.31.221 port 35054 connected with 192.168.31.29 port 5001 [ ID] Interval Transfer Bandwidth [ 5] 0.0- 0.0 sec 199 KBytes 1.42 Gbits/sec ^Cjigsaw@whitepawnxeon:~$ iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.31.221 port 5001 connected with 192.168.31.29 port 40142 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.9 sec 857 MBytes 658 Mbits/sec ------------------------------------------------------------ Client connecting to 192.168.31.29, TCP port 5001 TCP window size: 348 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.31.221 port 35058 connected with 192.168.31.29 port 5001 [ 4] 0.0-10.0 sec 411 MBytes 345 Mbits/sec ^Cjigsaw@whitepawnxeon:~$
Server Side:(RN102)
root@debian:~# ethtool -a eth0 Pause parameters for eth0: Autonegotiate: on RX: off TX: off RX negotiated: on TX negotiated: on root@debian:~# ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: Symmetric Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Port: MII PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: g Wake-on: d Link detected: yes root@debian:~# iperf -c 192.168.31.221 -r ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ ------------------------------------------------------------ Client connecting to 192.168.31.221, TCP port 5001 TCP window size: 276 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.29 port 40140 connected with 192.168.31.221 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 870 MBytes 730 Mbits/sec [ 5] local 192.168.31.29 port 5001 connected with 192.168.31.221 port 35046 [ 5] 0.0- 9.2 sec 344 MBytes 313 Mbits/sec root@debian:~# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ ^C^Croot@debian:~# iperf -c 192.168.31.221 -r ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ ------------------------------------------------------------ Client connecting to 192.168.31.221, TCP port 5001 TCP window size: 214 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.29 port 40142 connected with 192.168.31.221 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 856 MBytes 718 Mbits/sec [ 5] local 192.168.31.29 port 5001 connected with 192.168.31.221 port 35058 [ 5] 0.0- 9.2 sec 411 MBytes 376 Mbits/sec root@debian:~#uname -a Linux debian 5.9.3-mvebu-370xp-tld-3 #3.0 PREEMPT Sun Nov 29 14:33:38 PST 2020 armv7l GNU/Linux root@debian:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.9.3-mvebu-370xp-tld-3 (root@tldDebianVM) (arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0, GNU ld (GNU Binutils for Ubuntu) 2.30) #3.0 PREEMPT Sun Nov 29 14:33:38 PST 2020 [ 0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NETGEAR ReadyNAS 102 [ 0.000000] printk: bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=pxa3xx_nand-0:0x180000@0(u-boot),0x20000@0x180000(u-boot-env),0x600000@0x200000(uImage),0x400000@0x800000(minirootfs),-(ubifs) earlyprintk=serial init=/bin/systemd mtdparts=pxa3xx_nand-0:0x180000@0(u-boot),0x20000@0x180000(u-boot-env),0x600000@0x200000(uImage),0x400000@0x800000(minirootfs),-(ubifs) reason=normal bdtype=rn102 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 493548K/524288K available (10240K kernel code, 1056K rwdata, 3060K rodata, 1024K init, 346K bss, 30740K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] random: get_random_u32 called from ____cache_alloc+0x2ec/0x770 with crng_init=0 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C: DT/platform modifies aux control register: 0x12086300 -> 0x1a086302 [ 0.000000] Aurora cache controller enabled, 4 ways, 256 kB [ 0.000000] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a086302 [ 0.000000] Switching to timer-based delay loop, resolution 53ns [ 0.000007] sched_clock: 32 bits at 18MHz, resolution 53ns, wraps every 114537122277ns [ 0.007873] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 101938038664 ns [ 0.019228] Console: colour dummy device 80x30 [ 0.023947] Calibrating delay loop (skipped), value calculated using timer frequency.. 37.49 BogoMIPS (lpj=187492) [ 0.034065] pid_max: default: 32768 minimum: 301 [ 0.039143] LSM: Security Framework initializing [ 0.044083] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.051406] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.060117] CPU: Testing write buffer coherency: ok [ 0.066085] Setting up static identity map for 0x100000 - 0x100060 [ 0.072750] mvebu-soc-id: MVEBU SoC ID=0x6710, Rev=0x1 [ 0.078179] mvebu-pmsu: Initializing Power Management Service Unit [ 0.084617] rcu: Hierarchical SRCU implementation. [ 0.090710] devtmpfs: initialized [ 0.098887] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 [ 0.107768] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.117456] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.124602] xor: measuring software checksum speed [ 0.228557] arm4regs : 1103.200 MB/sec [ 0.328551] 8regs : 670.800 MB/sec [ 0.428550] 32regs : 1068.400 MB/sec [ 0.433002] xor: using function: arm4regs (1103.200 MB/sec) [ 0.438753] prandom: seed boundary self test passed [ 0.446295] prandom: 100 self tests passed [ 0.450693] pinctrl core: initialized pinctrl subsystem [ 0.458028] NET: Registered protocol family 16 [ 0.465518] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.473234] audit: initializing netlink subsys (disabled) [ 0.481457] thermal_sys: Registered thermal governor 'step_wise' [ 0.481675] cpuidle: using governor ladder [ 0.492344] audit: type=2000 audit(0.460:1): state=initialized audit_enabled=0 res=1 [ 0.503338] cpuidle: using governor menu [ 0.507915] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.514050] mvebu-pmsu: CPU idle is currently broken: disabling [ 0.809161] raid6: int32x8 gen() 214 MB/s [ 0.979290] raid6: int32x8 xor() 136 MB/s [ 1.148668] raid6: int32x4 gen() 222 MB/s [ 1.318725] raid6: int32x4 xor() 152 MB/s [ 1.488570] raid6: int32x2 gen() 402 MB/s [ 1.658582] raid6: int32x2 xor() 217 MB/s [ 1.828538] raid6: int32x1 gen() 370 MB/s [ 1.998570] raid6: int32x1 xor() 175 MB/s [ 2.003100] raid6: using algorithm int32x2 gen() 402 MB/s [ 2.008666] raid6: .... xor() 217 MB/s, rmw enabled [ 2.013750] raid6: using intx1 recovery algorithm [ 2.019846] vgaarb: loaded [ 2.025354] SCSI subsystem initialized [ 2.030457] libata version 3.00 loaded. [ 2.030744] usbcore: registered new interface driver usbfs [ 2.036435] usbcore: registered new interface driver hub [ 2.044373] usbcore: registered new device driver usb [ 2.050950] mc: Linux media interface: v0.10 [ 2.057213] videodev: Linux video capture interface: v2.00 [ 2.063561] pps_core: LinuxPPS API ver. 1 registered [ 2.069790] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 2.078972] PTP clock support registered [ 2.086747] clocksource: Switched to clocksource armada_370_xp_clocksource [ 3.112162] VFS: Disk quotas dquot_6.6.0 [ 3.116463] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.154180] NET: Registered protocol family 2 [ 3.163194] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 3.171855] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 3.179839] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 3.187061] TCP: Hash tables configured (established 4096 bind 4096) [ 3.193779] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear) [ 3.201224] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.207856] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.215050] NET: Registered protocol family 1 [ 3.220326] RPC: Registered named UNIX socket transport module. [ 3.226366] RPC: Registered udp transport module. [ 3.231363] RPC: Registered tcp transport module. [ 3.236289] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.242819] PCI: CLS 0 bytes, default 64 [ 3.247372] Trying to unpack rootfs image as initramfs... [ 3.835374] Freeing initrd memory: 9344K [ 3.840049] NetWinder Floating Point Emulator V0.97 (double precision) [ 3.846987] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 3.857718] Initialise system trusted keyrings [ 3.862457] Key type blacklist registered [ 3.869731] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 3.876341] zbud: loaded [ 3.880778] NFS: Registering the id_resolver key type [ 3.886045] Key type id_resolver registered [ 3.891039] Key type id_legacy registered [ 3.895386] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.902283] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 3.909066] jffs2: version 2.2. (NAND) (SUMMARY) \xc2\xa9 2001-2006 Red Hat, Inc. [ 3.917234] orangefs_debugfs_init: called with debug mask: :none: :0: [ 3.923933] orangefs_init: module version upstream loaded [ 4.003411] async_tx: api initialized (async) [ 4.008091] Key type asymmetric registered [ 4.012465] Asymmetric key parser 'x509' registered [ 4.017743] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 4.025225] io scheduler bfq registered [ 4.032070] armada-370-pinctrl d0018000.pin-ctrl: registered pinctrl driver [ 4.050174] mvebu-pcie soc:pcie@82000000: host bridge /soc/pcie@82000000 ranges: [ 4.058515] mvebu-pcie soc:pcie@82000000: Parsing ranges property... [ 4.058553] mvebu-pcie soc:pcie@82000000: MEM 0x00d0040000..0x00d0041fff -> 0x0000040000 [ 4.067325] mvebu-pcie soc:pcie@82000000: MEM 0x00d0080000..0x00d0081fff -> 0x0000080000 [ 4.075758] mvebu-pcie soc:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000 [ 4.084797] mvebu-pcie soc:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000 [ 4.093744] mvebu-pcie soc:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000 [ 4.102702] mvebu-pcie soc:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000 [ 4.112082] mvebu-pcie soc:pcie@82000000: PCI host bridge to bus 0000:00 [ 4.119142] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.124791] pci_bus 0000:00: root bus resource [mem 0xd0040000-0xd0041fff] (bus address [0x00040000-0x00041fff]) [ 4.134799] pci_bus 0000:00: root bus resource [mem 0xd0080000-0xd0081fff] (bus address [0x00080000-0x00081fff]) [ 4.144785] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff] [ 4.151736] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 4.158138] pci_bus 0000:00: scanning bus [ 4.158293] pci 0000:00:01.0: [11ab:6710] type 01 class 0x060400 [ 4.164431] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref] [ 4.171924] pci 0000:00:02.0: [11ab:6710] type 01 class 0x060400 [ 4.178621] pci 0000:00:02.0: reg 0x38: [mem 0x00000000-0x000007ff pref] [ 4.187062] pci_bus 0000:00: fixups for bus [ 4.187080] PCI: bus0: Fast back to back transfers disabled [ 4.192809] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 0 [ 4.192816] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 4.201313] pci 0000:00:02.0: scanning [bus 00-00] behind bridge, pass 0 [ 4.201323] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 4.209382] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 1 [ 4.209658] pci_bus 0000:01: scanning bus [ 4.209715] pci 0000:01:00.0: [1b4b:9170] type 00 class 0x010601 [ 4.215855] pci 0000:01:00.0: reg 0x10: [io 0xfffffff8-0xffffffff] [ 4.222615] pci 0000:01:00.0: reg 0x14: [io 0xfffffffc-0xffffffff] [ 4.229073] pci 0000:01:00.0: reg 0x18: [io 0xfffffff8-0xffffffff] [ 4.235436] pci 0000:01:00.0: reg 0x1c: [io 0xfffffffc-0xffffffff] [ 4.241851] pci 0000:01:00.0: reg 0x20: [io 0xfffffff0-0xffffffff] [ 4.248254] pci 0000:01:00.0: reg 0x24: [mem 0x40000000-0x400001ff] [ 4.254616] pci 0000:01:00.0: reg 0x30: [mem 0xd0000000-0xd000ffff pref] [ 4.261434] pci 0000:01:00.0: Enabling fixed DMA alias to 00.1 [ 4.267479] pci 0000:01:00.0: PME# supported from D3hot [ 4.272888] pci 0000:01:00.0: PME# disabled [ 4.273286] pci 0000:00:01.0: ASPM: current common clock configuration is inconsistent, reconfiguring [ 4.307879] pci_bus 0000:01: fixups for bus [ 4.307895] PCI: bus1: Fast back to back transfers disabled [ 4.313620] pci_bus 0000:01: bus scan returning with max=01 [ 4.313633] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 4.320373] pci 0000:00:02.0: scanning [bus 00-00] behind bridge, pass 1 [ 4.320632] pci_bus 0000:02: scanning bus [ 4.320696] pci 0000:02:00.0: [1b73:1009] type 00 class 0x0c0330 [ 4.327149] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x4200ffff 64bit] [ 4.333994] pci 0000:02:00.0: reg 0x18: [mem 0x42010000-0x42010fff 64bit] [ 4.340923] pci 0000:02:00.0: reg 0x20: [mem 0x42011000-0x42011fff 64bit] [ 4.347895] pci 0000:02:00.0: supports D1 [ 4.352192] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold [ 4.358673] pci 0000:02:00.0: PME# disabled [ 4.359061] pci 0000:00:02.0: ASPM: current common clock configuration is inconsistent, reconfiguring [ 4.397873] pci_bus 0000:02: fixups for bus [ 4.397888] PCI: bus2: Fast back to back transfers disabled [ 4.403613] pci_bus 0000:02: bus scan returning with max=02 [ 4.403625] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 4.410357] pci_bus 0000:00: bus scan returning with max=02 [ 4.410429] pci 0000:00:01.0: BAR 14: assigned [mem 0xf8000000-0xf80fffff] [ 4.417384] pci 0000:00:02.0: BAR 14: assigned [mem 0xf8100000-0xf81fffff] [ 4.424296] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff] [ 4.430768] pci 0000:00:01.0: BAR 6: assigned [mem 0xf8200000-0xf82007ff pref] [ 4.438016] pci 0000:00:02.0: BAR 6: assigned [mem 0xf8300000-0xf83007ff pref] [ 4.445252] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8000000-0xf800ffff pref] [ 4.452493] pci 0000:01:00.0: BAR 5: assigned [mem 0xf8010000-0xf80101ff] [ 4.459338] pci 0000:01:00.0: BAR 4: assigned [io 0x10000-0x1000f] [ 4.465696] pci 0000:01:00.0: BAR 0: assigned [io 0x10010-0x10017] [ 4.472065] pci 0000:01:00.0: BAR 2: assigned [io 0x10018-0x1001f] [ 4.478434] pci 0000:01:00.0: BAR 1: assigned [io 0x10020-0x10023] [ 4.484791] pci 0000:01:00.0: BAR 3: assigned [io 0x10024-0x10027] [ 4.491160] pci 0000:00:01.0: PCI bridge to [bus 01] [ 4.496328] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff] [ 4.502697] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff] [ 4.509548] pci 0000:02:00.0: BAR 0: assigned [mem 0xf8100000-0xf810ffff 64bit] [ 4.516873] pci 0000:02:00.0: BAR 2: assigned [mem 0xf8110000-0xf8110fff 64bit] [ 4.524186] pci 0000:02:00.0: BAR 4: assigned [mem 0xf8111000-0xf8111fff 64bit] [ 4.531508] pci 0000:00:02.0: PCI bridge to [bus 02] [ 4.536677] pci 0000:00:02.0: bridge window [mem 0xf8100000-0xf81fffff] [ 4.543618] pcieport 0000:00:01.0: assign IRQ: got 0 [ 4.543635] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 4.549871] pcieport 0000:00:01.0: enabling bus mastering [ 4.549948] pcieport 0000:00:02.0: assign IRQ: got 0 [ 4.549962] pcieport 0000:00:02.0: enabling device (0140 -> 0142) [ 4.556168] pcieport 0000:00:02.0: enabling bus mastering [ 4.556213] pci 0000:00:02.0: enabling bus mastering [ 4.557362] mv_xor d0060800.xor: Marvell shared XOR driver [ 4.617943] mv_xor d0060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.628239] mv_xor d0060900.xor: Marvell shared XOR driver [ 4.697910] mv_xor d0060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.933045] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 4.944478] printk: console [ttyS0] disabled [ 4.972523] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 19, base_baud = 12500000) is a 16550A [ 4.981584] printk: console [ttyS0] enabled [ 4.990611] printk: bootconsole [earlycon0] disabled [ 5.003188] ahci 0000:01:00.0: assign IRQ: got 41 [ 5.003208] ahci 0000:01:00.0: version 3.0 [ 5.003229] pci 0000:00:01.0: enabling bus mastering [ 5.003242] ahci 0000:01:00.0: enabling device (0146 -> 0147) [ 5.011538] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 5.019781] ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 5.031646] scsi host0: ahci [ 5.036498] scsi host1: ahci [ 5.040952] ata1: SATA max UDMA/133 abar m512@0xf8010000 port 0xf8010100 irq 42 [ 5.048975] ata2: SATA max UDMA/133 abar m512@0xf8010000 port 0xf8010180 irq 42 [ 5.057213] sata_mv d00a0000.sata: version 1.28 [ 5.057417] sata_mv d00a0000.sata: slots 32 ports 1 [ 5.066247] scsi host2: sata_mv [ 5.070775] ata3: SATA max UDMA/133 irq 27 [ 5.077089] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xf1 [ 5.083589] nand: Micron MT29F1G08ABADAWP [ 5.089641] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 5.097958] Bad block table found at page 65472, version 0x01 [ 5.104422] Bad block table found at page 65408, version 0x01 [ 5.110754] 5 cmdlinepart partitions found on MTD device pxa3xx_nand-0 [ 5.117523] Creating 5 MTD partitions on "pxa3xx_nand-0": [ 5.123144] 0x000000000000-0x000000180000 : "u-boot" [ 5.130246] 0x000000180000-0x0000001a0000 : "u-boot-env" [ 5.138789] 0x000000200000-0x000000800000 : "uImage" [ 5.147035] 0x000000800000-0x000000c00000 : "minirootfs" [ 5.155533] 0x000000c00000-0x000008000000 : "ubifs" [ 5.165126] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 5.175343] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. [ 5.188168] libphy: Fixed MDIO Bus: probed [ 5.199564] libphy: orion_mdio_bus: probed [ 5.222525] mvneta d0074000.ethernet eth0: Using random mac address 62:a2:d1:b2:ea:fe [ 5.235844] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.243948] ehci-pci: EHCI PCI platform driver [ 5.249147] ehci-orion: EHCI orion driver [ 5.253699] orion-ehci d0050000.usb: EHCI Host Controller [ 5.259804] orion-ehci d0050000.usb: new USB bus registered, assigned bus number 1 [ 5.267685] orion-ehci d0050000.usb: irq 25, io mem 0xd0050000 [ 5.296774] orion-ehci d0050000.usb: USB 2.0 started, EHCI 1.00 [ 5.303134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09 [ 5.311473] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.318816] usb usb1: Product: EHCI Host Controller [ 5.323983] usb usb1: Manufacturer: Linux 5.9.3-mvebu-370xp-tld-3 ehci_hcd [ 5.330995] usb usb1: SerialNumber: d0050000.usb [ 5.336887] hub 1-0:1.0: USB hub found [ 5.341612] hub 1-0:1.0: 1 port detected [ 5.347123] xhci_hcd 0000:02:00.0: assign IRQ: got 43 [ 5.347194] xhci_hcd 0000:02:00.0: enabling bus mastering [ 5.347207] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 5.353669] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 5.395694] ata1: SATA link down (SStatus 0 SControl 300) [ 5.401481] xhci_hcd 0000:02:00.0: can't setup: -19 [ 5.406623] xhci_hcd 0000:02:00.0: USB bus 2 deregistered [ 5.412321] ata2: SATA link down (SStatus 0 SControl 300) [ 5.452730] xhci_hcd 0000:02:00.0: init 0000:02:00.0 fail, -19 [ 5.459519] usbcore: registered new interface driver usblp [ 5.466255] usbcore: registered new interface driver usb-storage [ 5.473174] mousedev: PS/2 mouse device common for all mice [ 5.480922] i2c /dev entries driver [ 5.490509] rtc-ds1307 0-0068: 'wakeup-source' is set, request for an IRQ is disabled! [ 5.503592] rtc-ds1307 0-0068: registered as rtc0 [ 5.510771] rtc-ds1307 0-0068: setting system clock to 2020-12-03T11:27:09 UTC (1606994829) [ 5.548262] orion_wdt: Initial timeout 229 sec [ 5.555410] device-mapper: uevent: version 1.0.3 [ 5.561124] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com [ 5.569657] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl F300) [ 5.577036] device-mapper: multipath round-robin: version 1.2.0 loaded [ 5.583964] ata3.00: ATA-7: ST940210AS, 3.ALC, max UDMA/100 [ 5.589879] ata3.00: 78140160 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.596795] device-mapper: multipath queue-length: version 0.2.0 loaded [ 5.603719] device-mapper: multipath service-time: version 0.3.0 loaded [ 5.610736] ata3.00: configured for UDMA/100 [ 5.615404] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 5.621719] device-mapper: raid: Loading target version 1.15.1 [ 5.628209] scsi 2:0:0:0: Direct-Access ATA ST940210AS C PQ: 0 ANSI: 5 [ 5.644219] sd 2:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.3 GiB) [ 5.654286] sd 2:0:0:0: [sda] Write Protect is off [ 5.659927] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.660086] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.669563] marvell-cesa d0090000.crypto: CESA device successfully registered [ 5.677589] hid: raw HID events driver (C) Jiri Kosina [ 5.686447] usbcore: registered new interface driver usbhid [ 5.693212] usbhid: USB HID core driver [ 5.698155] drop_monitor: Initializing network drop monitor service [ 5.707983] NET: Registered protocol family 10 [ 5.713969] Segment Routing with IPv6 [ 5.718140] RPL Segment Routing with IPv6 [ 5.722563] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.731208] sda: sda1 [ 5.736736] sd 2:0:0:0: [sda] Attached SCSI disk [ 5.742334] NET: Registered protocol family 17 [ 5.748879] 8021q: 802.1Q VLAN Support v1.8 [ 5.753442] Key type dns_resolver registered [ 5.758513] ThumbEE CPU extension supported. [ 5.763523] registered taskstats version 1 [ 5.768313] Loading compiled-in X.509 certificates [ 5.773492] zswap: loaded using pool lzo/zbud [ 5.778685] Key type ._fscrypt registered [ 5.783025] Key type .fscrypt registered [ 5.787379] Key type fscrypt-provisioning registered [ 5.795480] Key type big_key registered [ 5.823271] Key type encrypted registered [ 5.831388] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 5.842731] Freeing unused kernel memory: 1024K [ 5.878654] Checked W+X mappings: passed, no W+X pages found [ 5.884541] Run /init as init process [ 5.888608] with arguments: [ 5.888613] /init [ 5.888617] with environment: [ 5.888620] HOME=/ [ 5.888624] TERM=linux [ 5.888627] reason=normal [ 5.888630] bdtype=rn102 [ 18.378586] process '/usr/bin/fstype' started with executable stack [ 18.511913] random: fast init done [ 19.362623] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 20.034440] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 23.516296] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 23.537349] systemd[1]: Detected architecture arm. [ 23.599780] systemd[1]: Set hostname to <debian>. [ 25.028423] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 25.044890] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 26.027406] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid \xe2\x86\x92 /run/rpc.statd.pid; please update the unit file accordingly. [ 26.277476] random: systemd: uninitialized urandom read (16 bytes read) [ 26.293793] random: systemd: uninitialized urandom read (16 bytes read) [ 26.300762] systemd[1]: Reached target Swap. [ 26.336979] random: systemd: uninitialized urandom read (16 bytes read) [ 26.347049] systemd[1]: Created slice system-getty.slice. [ 26.388322] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 26.427696] systemd[1]: Listening on fsck to fsckd communication Socket. [ 27.527098] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 28.327841] systemd-journald[1552]: Received request to flush runtime journal from PID 1 [ 30.533236] random: crng init done [ 30.537078] random: 7 urandom warning(s) missed due to ratelimiting [ 32.222294] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 42.439916] mvneta d0074000.ethernet eth0: PHY [d0072004.mdio-mii:00] driver [Marvell 88E1318S] (irq=POLL) [ 42.458412] mvneta d0074000.ethernet eth0: configuring for phy/rgmii-id link mode [ 45.627302] mvneta d0074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 45.635352] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 51.189979] Setting Persistent MAC address to MASKED [ 52.059755] NFSD: Using UMH upcall client tracking operations. [ 52.065867] NFSD: starting 90-second grace period (net f000001a) [ 52.667320] mvneta d0074000.ethernet eth0: Link is Down [ 52.988675] mvneta d0074000.ethernet eth0: PHY [d0072004.mdio-mii:00] driver [Marvell 88E1318S] (irq=POLL) [ 53.003895] mvneta d0074000.ethernet eth0: configuring for phy/rgmii-id link mode [ 56.109875] mvneta d0074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 56.117926] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 60.383571] fbcon: Taking over console [ 978.013792] mvneta d0074000.ethernet eth0: Link is Down [ 980.091869] mvneta d0074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx root@debian:~# ethtool --show-pause eth0 Pause parameters for eth0: Autonegotiate: on RX: off TX: off RX negotiated: on TX negotiated: on root@debian:~# ethtool --show-coalesce eth0 Coalesce parameters for eth0: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 100 rx-frames: 32 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 root@debian:~#
I have tried with brand new mi 4a gigabit router.Here is my connection diagram.
RN102----CAT6 Cable----Mi 4A Gigabit-----CAT6 Cable----Xeon Desktop
@tme
Could you please try tld3 version with iperf?I want to make sure if my setup is wrong or not.
Regards all.
|
Re: Debian on Netgear RN102 December 03, 2020 01:48PM |
Registered: 6 years ago Posts: 157 |
Hi bodhi,
The 'iperf' results in both directions with default settings:
My base line case is still 939 Mbits/sec as reported here.
Regards,
Trond Melen
The 'iperf' results in both directions with default settings:
tme@debian:~$ uname -a Linux debian 5.9.3-mvebu-370xp-tld-3 #3.0 PREEMPT Sun Nov 29 14:33:38 PST 2020 armv7l GNU/Linux tme@debian:~$ iperf -c 192.168.1.50 ------------------------------------------------------------ Client connecting to 192.168.1.50, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.1.39 port 44116 connected with 192.168.1.50 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 923 MBytes 774 Mbits/sec tme@debian:~$ iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.1.39 port 5001 connected with 192.168.1.50 port 50870 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 9.2 sec 676 MBytes 617 Mbits/sec
My base line case is still 939 Mbits/sec as reported here.
Regards,
Trond Melen
|
Re: Debian on Netgear RN102 December 03, 2020 11:39PM |
Admin Registered: 13 years ago Posts: 18,543 |
whitepawn,
> I have tried with your tld3 version with fresh
> install on my RN102.Network speed is improved
> significantly thank you.Now i can get 669
> Mbits/sec.But i cannot figured out why i am not
> getting 900Mbits/sec.
As I mentioned previously, the flow control settings is the important factor in testing the true network speed. So I would suggest that:
- Your Xeon Desktop Linux set the flow control to disabled.
- Your Mi 4A Gigabit router does not have any QoS (Quality of services) rules activated for the ports where the RN102 and the Xeon Dekstop connected to.
- The RN102 is the client side in iperf test.
Note that if you turn it around, and make the RN102 the server side, then you will see reduced speed in iperf, because it has flow control enabled by default.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> I have tried with your tld3 version with fresh
> install on my RN102.Network speed is improved
> significantly thank you.Now i can get 669
> Mbits/sec.But i cannot figured out why i am not
> getting 900Mbits/sec.
As I mentioned previously, the flow control settings is the important factor in testing the true network speed. So I would suggest that:
- Your Xeon Desktop Linux set the flow control to disabled.
- Your Mi 4A Gigabit router does not have any QoS (Quality of services) rules activated for the ports where the RN102 and the Xeon Dekstop connected to.
- The RN102 is the client side in iperf test.
Note that if you turn it around, and make the RN102 the server side, then you will see reduced speed in iperf, because it has flow control enabled by default.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Debian on Netgear RN102 December 03, 2020 11:43PM |
Admin Registered: 13 years ago Posts: 18,543 |
Trond,
> My base line case is still 939 Mbits/sec as
> reported
> here.
Yes.
However, you did not say how the performance was degraded between 5.9.3-mvebu-370xp-tld-3 and 5.8.5-mvebu-370xp-tld-1?
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> My base line case is still 939 Mbits/sec as
> reported
> here.
Yes.
However, you did not say how the performance was degraded between 5.9.3-mvebu-370xp-tld-3 and 5.8.5-mvebu-370xp-tld-1?
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Debian on Netgear RN102 December 04, 2020 11:44AM |
Registered: 4 years ago Posts: 73 |
Bodhi,
Thanks for suggestions.I have tried below:
I have disabled flow control both server and client side.
To confirm this i have tried it with another linuxmint lenovo laptop with same hardware and software configuration.Didn't change anything except laptop client side.Here is connection scheme:
Lenovo Linuxmint Laptop(Client)----CAT6 Cable----Mi 4A Gigabit-----CAT6 Cable----Xeon Desktop(Server)
And here is my results with above hardware configuration:
It seems all cables and router is fine.No Qos enabled.Mi Gigabit Router firmware is stock by the way,no openwrt or some weird 3rd party software.
Then i unplugged ethernet cable from Lenovo Laptop and plugged to RN102.Didn't change anything else.Here is digaram now:
RN102(Client)----CAT6 Cable----Mi 4A Gigabit-----CAT6 Cable----Xeon Desktop(Server)
And here is the results with same commands:
I have tested like above RN102 is client Xeon Desktop is server.Also you can see i have tested with Bi-directional bandwidth measurement: (-r argument).
Anyway in a nutshell i get approx 200Mbits/sec with 5.8.5-mvebu-370xp-tld-1 (no moded dtb) kernel and 700Mbits/sec with 5.9.3-mvebu-370xp-tld-3 which i am pretty happy about, 3.5 times bandwith increase no complains sir.Thank you very much.
If you have another thing to test or new kernel just let me know.
Also results for devmem L2 cache thing if relevant:
Some performance reports with 5.9.3 tld-3 kernel:
Here is my old sysbench mark with 5.8.5 tld-1 stock kernel if anyone interested:
New 5.9.3 tld-3 kernel sysbech results:
Also your tld3 kernel network speeds are 50 Mbits/sec faster than mine.
Regards.
Edited 5 time(s). Last edit at 12/04/2020 01:14PM by whitepawn.
Thanks for suggestions.I have tried below:
Quote
Bodhi
- Your Xeon Desktop Linux set the flow control to disabled.
I have disabled flow control both server and client side.
Quote
Bodhi
- Your Mi 4A Gigabit router does not have any QoS (Quality of services) rules activated for the ports where the RN102 and the Xeon Dekstop connected to.
To confirm this i have tried it with another linuxmint lenovo laptop with same hardware and software configuration.Didn't change anything except laptop client side.Here is connection scheme:
Lenovo Linuxmint Laptop(Client)----CAT6 Cable----Mi 4A Gigabit-----CAT6 Cable----Xeon Desktop(Server)
And here is my results with above hardware configuration:
Lenovo Laptop: jigsaw@whitepawn:~$ sudo su [sudo] password for jigsaw: root@whitepawn:/home/jigsaw# iperf -c 192.168.31.220 ------------------------------------------------------------ Client connecting to 192.168.31.220, TCP port 5001 TCP window size: 425 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.9 port 54424 connected with 192.168.31.220 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.09 GBytes 931 Mbits/sec root@whitepawn:/home/jigsaw# iperf -c 192.168.31.220 ------------------------------------------------------------ Client connecting to 192.168.31.220, TCP port 5001 TCP window size: 468 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.9 port 54428 connected with 192.168.31.220 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.09 GBytes 932 Mbits/sec root@whitepawn:/home/jigsaw# iperf -c 192.168.31.220 ------------------------------------------------------------ Client connecting to 192.168.31.220, TCP port 5001 TCP window size: 246 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.9 port 54430 connected with 192.168.31.220 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.09 GBytes 934 Mbits/sec root@whitepawn:/home/jigsaw# iperf -c 192.168.31.220 ------------------------------------------------------------ Client connecting to 192.168.31.220, TCP port 5001 TCP window size: 340 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.9 port 54432 connected with 192.168.31.220 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.09 GBytes 933 Mbits/sec root@whitepawn:/home/jigsaw# iperf -c 192.168.31.220 ------------------------------------------------------------ Client connecting to 192.168.31.220, TCP port 5001 TCP window size: 561 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.9 port 54434 connected with 192.168.31.220 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.09 GBytes 934 Mbits/sec root@whitepawn:/home/jigsaw# iperf -c 192.168.31.220 ------------------------------------------------------------ Client connecting to 192.168.31.220, TCP port 5001 TCP window size: 221 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.9 port 54436 connected with 192.168.31.220 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.08 GBytes 929 Mbits/sec root@whitepawn:/home/jigsaw# Xeon Desktop: root@whitepawnxeon:/home/jigsaw# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.31.220 port 5001 connected with 192.168.31.9 port 54424 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 1.09 GBytes 930 Mbits/sec [ 4] local 192.168.31.220 port 5001 connected with 192.168.31.9 port 54428 [ 4] 0.0-10.0 sec 1.09 GBytes 930 Mbits/sec [ 4] local 192.168.31.220 port 5001 connected with 192.168.31.9 port 54430 [ 4] 0.0-10.0 sec 1.09 GBytes 933 Mbits/sec [ 4] local 192.168.31.220 port 5001 connected with 192.168.31.9 port 54432 [ 4] 0.0-10.0 sec 1.09 GBytes 930 Mbits/sec [ 4] local 192.168.31.220 port 5001 connected with 192.168.31.9 port 54434 [ 4] 0.0-10.0 sec 1.09 GBytes 932 Mbits/sec [ 4] local 192.168.31.220 port 5001 connected with 192.168.31.9 port 54436 [ 4] 0.0-10.0 sec 1.08 GBytes 928 Mbits/sec
It seems all cables and router is fine.No Qos enabled.Mi Gigabit Router firmware is stock by the way,no openwrt or some weird 3rd party software.
Then i unplugged ethernet cable from Lenovo Laptop and plugged to RN102.Didn't change anything else.Here is digaram now:
RN102(Client)----CAT6 Cable----Mi 4A Gigabit-----CAT6 Cable----Xeon Desktop(Server)
And here is the results with same commands:
RN102 (Client): root@debian:~# iperf -c 192.168.31.220 ------------------------------------------------------------ Client connecting to 192.168.31.220, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.29 port 60272 connected with 192.168.31.220 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 864 MBytes 725 Mbits/sec root@debian:~# iperf -c 192.168.31.220 ------------------------------------------------------------ Client connecting to 192.168.31.220, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.29 port 60274 connected with 192.168.31.220 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 865 MBytes 726 Mbits/sec root@debian:~# iperf -c 192.168.31.220 ------------------------------------------------------------ Client connecting to 192.168.31.220, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.29 port 60276 connected with 192.168.31.220 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 844 MBytes 708 Mbits/sec root@debian:~# iperf -c 192.168.31.220 -r ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ ------------------------------------------------------------ Client connecting to 192.168.31.220, TCP port 5001 TCP window size: 197 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.29 port 60278 connected with 192.168.31.220 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 870 MBytes 730 Mbits/sec [ 5] local 192.168.31.29 port 5001 connected with 192.168.31.220 port 35506 [ 5] 0.0- 9.2 sec 411 MBytes 375 Mbits/sec root@debian:~# iperf -c 192.168.31.220 -r ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ ------------------------------------------------------------ Client connecting to 192.168.31.220, TCP port 5001 TCP window size: 140 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.29 port 60280 connected with 192.168.31.220 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 862 MBytes 723 Mbits/sec [ 5] local 192.168.31.29 port 5001 connected with 192.168.31.220 port 35512 [ 5] 0.0- 9.2 sec 343 MBytes 313 Mbits/sec root@debian:~# iperf -c 192.168.31.220 -r ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ ------------------------------------------------------------ Client connecting to 192.168.31.220, TCP port 5001 TCP window size: 236 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.29 port 60282 connected with 192.168.31.220 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 860 MBytes 721 Mbits/sec [ 5] local 192.168.31.29 port 5001 connected with 192.168.31.220 port 35520 [ 5] 0.0- 9.2 sec 322 MBytes 294 Mbits/sec root@debian:~# Xeon Desktop: root@whitepawnxeon:/home/jigsaw# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.31.220 port 5001 connected with 192.168.31.29 port 60272 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.9 sec 864 MBytes 664 Mbits/sec [ 4] local 192.168.31.220 port 5001 connected with 192.168.31.29 port 60274 [ 4] 0.0-10.9 sec 865 MBytes 665 Mbits/sec [ 4] local 192.168.31.220 port 5001 connected with 192.168.31.29 port 60276 [ 4] 0.0-10.9 sec 844 MBytes 648 Mbits/sec [ 4] local 192.168.31.220 port 5001 connected with 192.168.31.29 port 60278 [ 4] 0.0-10.9 sec 871 MBytes 669 Mbits/sec ------------------------------------------------------------ Client connecting to 192.168.31.29, TCP port 5001 TCP window size: 323 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.31.220 port 35506 connected with 192.168.31.29 port 5001 [ 4] 0.0-10.0 sec 411 MBytes 344 Mbits/sec [ 4] local 192.168.31.220 port 5001 connected with 192.168.31.29 port 60280 [ 4] 0.0-10.9 sec 863 MBytes 663 Mbits/sec ------------------------------------------------------------ Client connecting to 192.168.31.29, TCP port 5001 TCP window size: 264 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.31.220 port 35512 connected with 192.168.31.29 port 5001 [ 4] 0.0-10.0 sec 343 MBytes 288 Mbits/sec [ 4] local 192.168.31.220 port 5001 connected with 192.168.31.29 port 60282 [ 4] 0.0-10.9 sec 860 MBytes 660 Mbits/sec ------------------------------------------------------------ Client connecting to 192.168.31.29, TCP port 5001 TCP window size: 416 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.31.220 port 35520 connected with 192.168.31.29 port 5001 [ 4] 0.0-10.0 sec 322 MBytes 269 Mbits/sec
Quote
Bodhi
- The RN102 is the client side in iperf test.
I have tested like above RN102 is client Xeon Desktop is server.Also you can see i have tested with Bi-directional bandwidth measurement: (-r argument).
Anyway in a nutshell i get approx 200Mbits/sec with 5.8.5-mvebu-370xp-tld-1 (no moded dtb) kernel and 700Mbits/sec with 5.9.3-mvebu-370xp-tld-3 which i am pretty happy about, 3.5 times bandwith increase no complains sir.Thank you very much.
If you have another thing to test or new kernel just let me know.
Also results for devmem L2 cache thing if relevant:
root@debian:~# busybox devmem 0xd0008100 0x00000001 root@debian:~# busybox devmem 0xd0008104 0x1A086302 root@debian:~# busybox devmem 0xd0020200 0x00000002
This is stock firmware right?Quote
Tme
My base line case is still 939 Mbits/sec as reported here.
Some performance reports with 5.9.3 tld-3 kernel:
root@debian:~# dd if=/dev/zero of=/dev/null bs=32k count=32768 32768+0 records in 32768+0 records out 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 1.6048 s, 669 MB/s root@debian:~# dd if=/dev/zero of=/dev/null bs=32k count=32768 32768+0 records in 32768+0 records out 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 1.60365 s, 670 MB/s
root@debian:~# dd if=/dev/urandom of=/dev/null bs=32k count=4096 4096+0 records in 4096+0 records out 134217728 bytes (134 MB, 128 MiB) copied, 4.59755 s, 29.2 MB/s root@debian:~# dd if=/dev/urandom of=/dev/null bs=32k count=4096 4096+0 records in 4096+0 records out 134217728 bytes (134 MB, 128 MiB) copied, 4.59685 s, 29.2 MB/s
Here is my old sysbench mark with 5.8.5 tld-1 stock kernel if anyone interested:
root@neutron:~# sysbench --test=memory --memory-block-size=512K --memory-total-size=512M run
sysbench 0.4.12: multi-threaded system evaluation benchmark
Running the test with following options:
Number of threads: 1
Doing memory operations speed test
Memory block size: 512K
Memory transfer size: 512M
Memory operations type: write
Memory scope type: global
Threads started!
Done.
Operations performed: 1024 ( 1508.34 ops/sec)
512.00 MB transferred (754.17 MB/sec)
Test execution summary:
total time: 0.6789s
total number of events: 1024
total time taken by event execution: 0.6741
per-request statistics:
min: 0.63ms
avg: 0.66ms
max: 4.52ms
approx. 95 percentile: 0.68ms
Threads fairness:
events (avg/stddev): 1024.0000/0.00
execution time (avg/stddev): 0.6741/0.00
root@neutron:~#
root@neutron:~# sysbench --test=cpu --cpu-max-prime=2000 --num-threads=2 run
sysbench 0.4.12: multi-threaded system evaluation benchmark
Running the test with following options:
Number of threads: 2
Doing CPU performance benchmark
Threads started!
Done.
Maximum prime number checked in CPU test: 2000
Test execution summary:
total time: 21.6869s
total number of events: 10000
total time taken by event execution: 43.3416
per-request statistics:
min: 2.12ms
avg: 4.33ms
max: 52.40ms
approx. 95 percentile: 12.18ms
Threads fairness:
events (avg/stddev): 5000.0000/0.00
execution time (avg/stddev): 21.6708/0.00
New 5.9.3 tld-3 kernel sysbech results:
root@debian:~# sysbench --test=memory --memory-block-size=512K --memory-total-size=512M run
sysbench 0.4.12: multi-threaded system evaluation benchmark
Running the test with following options:
Number of threads: 1
Doing memory operations speed test
Memory block size: 512K
Memory transfer size: 512M
Memory operations type: write
Memory scope type: global
Threads started!
Done.
Operations performed: 1024 ( 1495.33 ops/sec)
512.00 MB transferred (747.67 MB/sec)
Test execution summary:
total time: 0.6848s
total number of events: 1024
total time taken by event execution: 0.6818
per-request statistics:
min: 0.64ms
avg: 0.67ms
max: 0.96ms
approx. 95 percentile: 0.68ms
Threads fairness:
events (avg/stddev): 1024.0000/0.00
execution time (avg/stddev): 0.6818/0.00
root@debian:~# sysbench --test=cpu --cpu-max-prime=2000 --num-threads=2 run
sysbench 0.4.12: multi-threaded system evaluation benchmark
Running the test with following options:
Number of threads: 2
Doing CPU performance benchmark
Threads started!
Done.
Maximum prime number checked in CPU test: 2000
Test execution summary:
total time: 31.6414s
total number of events: 10000
total time taken by event execution: 63.2173
per-request statistics:
min: 3.15ms
avg: 6.32ms
max: 23.21ms
approx. 95 percentile: 13.17ms
Threads fairness:
events (avg/stddev): 5000.0000/0.00
execution time (avg/stddev): 31.6087/0.02
root@debian:~#
Also your tld3 kernel network speeds are 50 Mbits/sec faster than mine.
Regards.
Edited 5 time(s). Last edit at 12/04/2020 01:14PM by whitepawn.
|
Re: Debian on Netgear RN102 December 06, 2020 06:52AM |
Registered: 4 years ago Posts: 73 |
bodhi,
I have just tested your fresh tld-4 kernel for providing you more info.Here is my results.I have tested on same setup as before:
Here is sysbench resuts and dd results:
Here is avaraged summary report:
/dev/zero test 2 times faster wow.Urandom is improved, but network seems degraded about 90 Mbits/sec.Maybe my setup is bad i don't know.Maybe you can comment on results.
Also noticed your new kernel linux-5.9.3-mvebu-370xp-tld-4-bodhi.tar dtb file is linux-dtb-5.9.3-mvebu-370xp-tld-3.I am not sure if this is relevant 3 or 4.
@Tme,
Could you please share tld-4 results on your box to be sure results are correct?
Regards.
Edited 1 time(s). Last edit at 12/06/2020 07:09AM by whitepawn.
I have just tested your fresh tld-4 kernel for providing you more info.Here is my results.I have tested on same setup as before:
Server side Xeon Desktop: jigsaw@whitepawnxeon:~$ iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.31.220 port 5001 connected with 192.168.31.29 port 44156 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.9 sec 766 MBytes 589 Mbits/sec [ 4] local 192.168.31.220 port 5001 connected with 192.168.31.29 port 44158 [ 4] 0.0-10.9 sec 756 MBytes 581 Mbits/sec [ 4] local 192.168.31.220 port 5001 connected with 192.168.31.29 port 44160 [ 4] 0.0-10.9 sec 760 MBytes 584 Mbits/sec [ 4] local 192.168.31.220 port 5001 connected with 192.168.31.29 port 44162 [ 4] 0.0-10.9 sec 752 MBytes 578 Mbits/sec Clinet side RN102: login as: root root@192.168.31.29's password: Linux debian 5.9.3-mvebu-370xp-tld-4 #4.0 PREEMPT Fri Dec 4 20:53:28 PST 2020 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Sun Dec 6 04:00:16 2020 from 192.168.31.194 debian 192.168.31.29 NETGEAR ReadyNAS 102 Linux version 5.9.3-mvebu-370xp-tld-4 (root@tldDebianVM) (arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0, GNU ld (GNU Binutils for Ubuntu) 2.30) #4.0 PREEMPT Fri Dec 4 20:53:28 PST 2020 Debian 10.6 Sun Dec 6 04:07:00 PST 2020 up 7 minutes root@debian:~# iperf -c 192.168.31.220 ------------------------------------------------------------ Client connecting to 192.168.31.220, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.29 port 44156 connected with 192.168.31.220 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 766 MBytes 643 Mbits/sec root@debian:~# iperf -c 192.168.31.220 ------------------------------------------------------------ Client connecting to 192.168.31.220, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.29 port 44158 connected with 192.168.31.220 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 756 MBytes 634 Mbits/sec root@debian:~# iperf -c 192.168.31.220 ------------------------------------------------------------ Client connecting to 192.168.31.220, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.29 port 44160 connected with 192.168.31.220 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 760 MBytes 637 Mbits/sec root@debian:~# iperf -c 192.168.31.220 ------------------------------------------------------------ Client connecting to 192.168.31.220, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.31.29 port 44162 connected with 192.168.31.220 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 752 MBytes 631 Mbits/sec root@debian:~#
Here is sysbench resuts and dd results:
root@debian:~# uname -a
Linux debian 5.9.3-mvebu-370xp-tld-4 #4.0 PREEMPT Fri Dec 4 20:53:28 PST 2020 armv7l GNU/Linux
root@debian:~# sysbench --test=memory --memory-block-size=512K --memory-total-size=512M run
sysbench 0.4.12: multi-threaded system evaluation benchmark
Running the test with following options:
Number of threads: 1
Doing memory operations speed test
Memory block size: 512K
Memory transfer size: 512M
Memory operations type: write
Memory scope type: global
Threads started!
Done.
Operations performed: 1024 ( 1293.06 ops/sec)
512.00 MB transferred (646.53 MB/sec)
Test execution summary:
total time: 0.7919s
total number of events: 1024
total time taken by event execution: 0.7883
per-request statistics:
min: 0.74ms
avg: 0.77ms
max: 1.05ms
approx. 95 percentile: 0.80ms
Threads fairness:
events (avg/stddev): 1024.0000/0.00
execution time (avg/stddev): 0.7883/0.00
root@debian:~# sysbench --test=cpu --cpu-max-prime=2000 --num-threads=2 run
sysbench 0.4.12: multi-threaded system evaluation benchmark
Running the test with following options:
Number of threads: 2
Doing CPU performance benchmark
Threads started!
Done.
Maximum prime number checked in CPU test: 2000
Test execution summary:
total time: 31.6653s
total number of events: 10000
total time taken by event execution: 63.3096
per-request statistics:
min: 3.15ms
avg: 6.33ms
max: 23.21ms
approx. 95 percentile: 13.17ms
Threads fairness:
events (avg/stddev): 5000.0000/1.00
execution time (avg/stddev): 31.6548/0.00
root@debian:~#
root@debian:~# dd if=/dev/zero of=/dev/null bs=32k count=32768
32768+0 records in
32768+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 0.85339 s, 1.3 GB/s
root@debian:~# dd if=/dev/zero of=/dev/null bs=32k count=32768
32768+0 records in
32768+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 0.827713 s, 1.3 GB/s
root@debian:~# dd if=/dev/urandom of=/dev/null bs=32k count=4096
4096+0 records in
4096+0 records out
134217728 bytes (134 MB, 128 MiB) copied, 4.21899 s, 31.8 MB/s
root@debian:~# dd if=/dev/urandom of=/dev/null bs=32k count=4096
4096+0 records in
4096+0 records out
134217728 bytes (134 MB, 128 MiB) copied, 4.31141 s, 31.1 MB/s
root@debian:~#
Here is avaraged summary report:
Kernel Version 5.8.5 tld-1 5.9.3 tld-3 5.9.3 tld-4 iperf 196 Mbits/sec 722 Mbits/sec 636 Mbits/sec Sysbench Memory 0.66ms 0.67ms 0.77ms Sysbench CPU 4.33ms 6.32ms 6.33ms /dev/zero Not tested 669 MB/s 1.3 GB/s /dev/urandom Not tested 29.2 MB/s 31.8 MB/s
/dev/zero test 2 times faster wow.Urandom is improved, but network seems degraded about 90 Mbits/sec.Maybe my setup is bad i don't know.Maybe you can comment on results.
Also noticed your new kernel linux-5.9.3-mvebu-370xp-tld-4-bodhi.tar dtb file is linux-dtb-5.9.3-mvebu-370xp-tld-3.I am not sure if this is relevant 3 or 4.
@Tme,
Could you please share tld-4 results on your box to be sure results are correct?
Regards.
Edited 1 time(s). Last edit at 12/06/2020 07:09AM by whitepawn.
|
Re: Debian on Netgear RN102 December 06, 2020 03:40PM |
Admin Registered: 13 years ago Posts: 18,543 |
Thanks whitepawn!
As I said in the installation thread, I think the IO Cohenrency patch is not enough by itself. There must be other changes that we don't have in Debian kernel.
It is not relevant, because the DTB is the same so I did not create a new DTB tarball.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 12/06/2020 03:42PM by bodhi.
As I said in the installation thread, I think the IO Cohenrency patch is not enough by itself. There must be other changes that we don't have in Debian kernel.
Quote
Also noticed your new kernel linux-5.9.3-mvebu-370xp-tld-4-bodhi.tar dtb file is linux-dtb-5.9.3-mvebu-370xp-tld-3.I am not sure if this is relevant 3 or 4.
It is not relevant, because the DTB is the same so I did not create a new DTB tarball.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 12/06/2020 03:42PM by bodhi.
|
Re: Debian on Netgear RN102 December 09, 2020 03:26PM |
Registered: 6 years ago Posts: 157 |
Hi bodhi,
I have tested the performance of all the 4 versions of your Linux kernel 5.9.3-mvebu-370xp, as well as the stock Netgear kernel for ReadyNAS RN102. My laptop was cabled to the box via a gigabit router. All tests were performed 3 times, but only the median results are reported here.
This is a summary (larger is better):
Stock Linux kernel:
Linux 5.9.3-mvebu-370xp-tld-1 kernel:
Linux 5.9.3-mvebu-370xp-tld-2 kernel:
Linux 5.9.3-mvebu-370xp-tld-3 kernel:
Linux 5.9.3-mvebu-370xp-tld-4 kernel:
I noticed that, with the tld-2 kernel, I got plenty of these messages on the serial console:
Regards,
Trond Melen
EDIT: Formatting only :TIDE
Edited 1 time(s). Last edit at 12/11/2020 02:07AM by tme.
I have tested the performance of all the 4 versions of your Linux kernel 5.9.3-mvebu-370xp, as well as the stock Netgear kernel for ReadyNAS RN102. My laptop was cabled to the box via a gigabit router. All tests were performed 3 times, but only the median results are reported here.
This is a summary (larger is better):
A B C D E F
stock 618 3.3 37.0 87.6 939 930
tld-1 1100 27.9 20.9 51.5 599 587
tld-2 613 27.3 21.9 47.2 689 577
tld-3 663 31.6 24.4 52.1 763 621
tld-4 1300 31.6 23.0 54.4 647 626
stock 100 100 100 100 100 100
tld-1 178 845 56 59 64 63
tld-2 99 827 59 54 73 62
tld-3 107 958 66 59 81 67
tld-4 210 958 62 62 69 67
A: Generate and dump 1 GiB of zeros
B: Generate and dump 128 MiB of random numbers
C: Generate 1 GiB of zeros and transmit them to the laptop
D: Receive 1 GiB of data from the laptop and dump it (performance reported by laptop)
E: iperf as client
F: iperf as server
Stock Linux kernel:
root@rn102:~# uname -a Linux rn102 4.4.190.armada.1 #1 SMP Mon Oct 28 02:07:39 UTC 2019 armv7l GNU/Linux root@rn102:~# dd if=/dev/zero of=/dev/null bs=32k count=32768 32768+0 records in 32768+0 records out 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 1.73625 s, 618 MB/s root@rn102:~# dd if=/dev/urandom of=/dev/null bs=32k count=4096 4096+0 records in 4096+0 records out 134217728 bytes (134 MB, 128 MiB) copied, 40.2903 s, 3.3 MB/s root@rn102:~# dd if=/dev/zero bs=32k count=32768 | nc 192.168.1.50 2222 32768+0 records in 32768+0 records out 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 29.0377 s, 37.0 MB/s ^C root@rn102:~# time nc -q 0 -l -p 2222 > /dev/null real 0m13.261s user 0m0.310s sys 0m11.910s ============================================================ tme@laptop:~$ dd if=/dev/zero bs=32k count=32768 | nc 192.168.1.44 2222 32768+0 records in 32768+0 records out 1073741824 bytes (1,1 GB, 1,0 GiB) copied, 12,2623 s, 87,6 MB/s ^C ============================================================ root@rn102:~# iperf -c 192.168.1.50 ------------------------------------------------------------ Client connecting to 192.168.1.50, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.1.44 port 55792 connected with 192.168.1.50 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec root@rn102:~# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.1.44 port 5001 connected with 192.168.1.50 port 35122 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 1.08 GBytes 930 Mbits/sec ^C
Linux 5.9.3-mvebu-370xp-tld-1 kernel:
root@debian:~# uname -a Linux debian 5.9.3-mvebu-370xp-tld-1 #1.0 SMP PREEMPT Tue Nov 24 20:43:55 PST 2020 armv7l GNU/Linux root@debian:~# dd if=/dev/zero of=/dev/null bs=32k count=32768 32768+0 records in 32768+0 records out 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 0.957256 s, 1.1 GB/s root@debian:~# dd if=/dev/urandom of=/dev/null bs=32k count=4096 4096+0 records in 4096+0 records out 134217728 bytes (134 MB, 128 MiB) copied, 4.8071 s, 27.9 MB/s root@debian:~# dd if=/dev/zero bs=32k count=32768 | nc 192.168.1.50 2222 32768+0 records in 32768+0 records out 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 51.3419 s, 20.9 MB/s ^C root@debian:~# time nc -q 0 -l -p 2222 > /dev/null real 0m20.707s user 0m0.267s sys 0m18.995s ============================================================ tme@tlaptop:~$ dd if=/dev/zero bs=32k count=32768 | nc 192.168.1.39 2222 32768+0 records in 32768+0 records out 1073741824 bytes (1,1 GB, 1,0 GiB) copied, 20,8376 s, 51,5 MB/s ^C ============================================================ root@debian:~# iperf -c 192.168.1.50 ------------------------------------------------------------ Client connecting to 192.168.1.50, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.1.39 port 60522 connected with 192.168.1.50 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 714 MBytes 599 Mbits/sec root@debian:~# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.1.39 port 5001 connected with 192.168.1.50 port 58436 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 9.2 sec 642 MBytes 587 Mbits/sec ^C
Linux 5.9.3-mvebu-370xp-tld-2 kernel:
tme@debian:~$ uname -a Linux debian 5.9.3-mvebu-370xp-tld-2 #2.0 SMP PREEMPT Fri Nov 27 20:44:40 PST 2020 armv7l GNU/Linux tme@debian:~$ dd if=/dev/zero of=/dev/null bs=32k count=32768 32768+0 records in 32768+0 records out 1073741824 bytes (1,1 GB, 1,0 GiB) copied, 1,75107 s, 613 MB/s tme@debian:~$ dd if=/dev/urandom of=/dev/null bs=32k count=4096 4096+0 records in 4096+0 records out 134217728 bytes (134 MB, 128 MiB) copied, 4,917 s, 27,3 MB/s tme@debian:~$ dd if=/dev/zero bs=32k count=32768 | nc 192.168.1.50 2222 32768+0 records in 32768+0 records out 1073741824 bytes (1,1 GB, 1,0 GiB) copied, 48,9218 s, 21,9 MB/s ^C tme@debian:~$ time nc -q 0 -l -p 2222 > /dev/null real 0m21,621s user 0m0,319s sys 0m20,070s ============================================================ tme@laptop:~$ dd if=/dev/zero bs=32k count=32768 | nc 192.168.1.39 2222 32768+0 records in 32768+0 records out 1073741824 bytes (1,1 GB, 1,0 GiB) copied, 22,7444 s, 47,2 MB/s ^C ============================================================ tme@debian:~$ iperf -c 192.168.1.50 ------------------------------------------------------------ Client connecting to 192.168.1.50, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.1.39 port 60218 connected with 192.168.1.50 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 821 MBytes 689 Mbits/sec tme@debian:~$ iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.1.39 port 5001 connected with 192.168.1.50 port 42696 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 9.2 sec 632 MBytes 577 Mbits/sec ^C
Linux 5.9.3-mvebu-370xp-tld-3 kernel:
root@debian:~# uname -a Linux debian 5.9.3-mvebu-370xp-tld-3 #3.0 PREEMPT Sun Nov 29 14:33:38 PST 2020 armv7l GNU/Linux root@debian:~# dd if=/dev/zero of=/dev/null bs=32k count=32768 32768+0 records in 32768+0 records out 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 1.61921 s, 663 MB/s root@debian:~# dd if=/dev/urandom of=/dev/null bs=32k count=4096 4096+0 records in 4096+0 records out 134217728 bytes (134 MB, 128 MiB) copied, 4.2469 s, 31.6 MB/s root@debian:~# dd if=/dev/zero bs=32k count=32768 | nc 192.168.1.50 2222 32768+0 records in 32768+0 records out 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 43.9966 s, 24.4 MB/s ^C root@debian:~# time nc -q 0 -l -p 2222 > /dev/null real 0m19.736s user 0m0.200s sys 0m18.310s ============================================================ tme@tlaptop:~$ dd if=/dev/zero bs=32k count=32768 | nc 192.168.1.39 2222 32768+0 records in 32768+0 records out 1073741824 bytes (1,1 GB, 1,0 GiB) copied, 20,6108 s, 52,1 MB/s ^C ============================================================ root@debian:~# iperf -c 192.168.1.50 ------------------------------------------------------------ Client connecting to 192.168.1.50, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.1.39 port 42664 connected with 192.168.1.50 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 909 MBytes 763 Mbits/sec root@debian:~# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.1.39 port 5001 connected with 192.168.1.50 port 56680 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 9.2 sec 680 MBytes 621 Mbits/sec ^C
Linux 5.9.3-mvebu-370xp-tld-4 kernel:
tme@debian:~$ uname -a Linux debian 5.9.3-mvebu-370xp-tld-4 #4.0 PREEMPT Fri Dec 4 20:53:28 PST 2020 armv7l GNU/Linux tme@debian:~$ dd if=/dev/zero of=/dev/null bs=32k count=32768 32768+0 records in 32768+0 records out 1073741824 bytes (1,1 GB, 1,0 GiB) copied, 0,801733 s, 1,3 GB/s tme@debian:~$ dd if=/dev/urandom of=/dev/null bs=32k count=4096 4096+0 records in 4096+0 records out 134217728 bytes (134 MB, 128 MiB) copied, 4,24846 s, 31,6 MB/s tme@debian:~$ dd if=/dev/zero bs=32k count=32768 | nc 192.168.1.50 2222 32768+0 records in 32768+0 records out 1073741824 bytes (1,1 GB, 1,0 GiB) copied, 46,6977 s, 23,0 MB/s ^C tme@debian:~$ time nc -q 0 -l -p 2222 > /dev/null real 0m18,721s user 0m0,366s sys 0m17,391s ============================================================ tme@laptop:~$ dd if=/dev/zero bs=32k count=32768 | nc 192.168.1.39 2222 32768+0 records in 32768+0 records out 1073741824 bytes (1,1 GB, 1,0 GiB) copied, 19,7463 s, 54,4 MB/s ^C ============================================================ tme@debian:~$ iperf -c 192.168.1.50 ------------------------------------------------------------ Client connecting to 192.168.1.50, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.1.39 port 51566 connected with 192.168.1.50 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 771 MBytes 647 Mbits/sec tme@debian:~$ iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.1.39 port 5001 connected with 192.168.1.50 port 42812 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 9.2 sec 686 MBytes 626 Mbits/sec ^C
I noticed that, with the tld-2 kernel, I got plenty of these messages on the serial console:
[ 2101.539741][ C0] mvneta d0074000.ethernet eth0: bad rx status 0f830000 (overrun error), size=960 [ 2101.876297][ C0] mvneta d0074000.ethernet eth0: bad rx status 0f830000 (overrun error), size=440 [...] [ 2105.538840][ C0] mvneta d0074000.ethernet eth0: bad rx status 0f830000 (overrun error), size=1344 [ 2105.557391][ C0] mvneta d0074000.ethernet eth0: bad rx status 0f830000 (overrun error), size=704
Regards,
Trond Melen
EDIT: Formatting only :TIDE
Edited 1 time(s). Last edit at 12/11/2020 02:07AM by tme.
|
Re: Debian on Netgear RN102 December 09, 2020 06:06PM |
Admin Registered: 13 years ago Posts: 18,543 |
Thanks Trond,
We can see also from the other thread the iperf tests by David and I, we can get to ~940Mbs when the Mirabox is the client:
https://forum.doozan.com/read.php?2,92514,112399#msg-112399
So now I'm interested in seeing if as the server, the Mirabox and RN102 can achieve that speed.
===
In your test, you got 763Mbs as client so that's something we shouldfind out why.
And the other interesting test is tld-4. According to this test, the IO Coherency is working (A and B)
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
We can see also from the other thread the iperf tests by David and I, we can get to ~940Mbs when the Mirabox is the client:
https://forum.doozan.com/read.php?2,92514,112399#msg-112399
So now I'm interested in seeing if as the server, the Mirabox and RN102 can achieve that speed.
===
In your test, you got 763Mbs as client so that's something we shouldfind out why.
A B C D E F
tld-3 663 31.6 24.4 52.1 763 621
And the other interesting test is tld-4. According to this test, the IO Coherency is working (A and B)
A B C D E F
tld-4 1300 31.6 23.0 54.4 647 626
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Debian on Netgear RN102 January 24, 2021 05:00PM |
Registered: 3 years ago Posts: 3 |
Hi
I hope someone can help me with restoring my rn102.After load the uboot via kwboot now I can't save uboot to nand .Error: Did not find a cmdline Flattened Device Tree.Could not find a valid device tree.
====
moderator edit: please use code tags (Formatted code button) to post log.
Edited 1 time(s). Last edit at 01/29/2021 03:57PM by bodhi.
I hope someone can help me with restoring my rn102.After load the uboot via kwboot now I can't save uboot to nand .Error: Did not find a cmdline Flattened Device Tree.Could not find a valid device tree.
99 % [.............................................] [Type Ctrl-\ + c to quit] __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2011.12-gec25d27-dirty (Oct 26 2015 - 16:53:05) Marvell version: v2011.12 2014_T2.0p1 06/23/2015 ReadyNAS-102 V2.0 Board: DB-88F6710-BP SoC: MV6710 A1 CPU: Marvell PJ4B v7 UP (Rev 1) LE CPU @ 1200 [MHz] L2 @ 600 [MHz] TClock @ 200 [MHz] DDR @ 600 [MHz] DDR 16Bit Width, FastPath Memory Access DRAM: 512 MiB Map: Code: 0x1feef000:0x1ff9ef34 BSS: 0x1ffef0a0 Stack: 0x1f9eeef8 Heap: 0x1f9ef000:0x1feef000 NAND: (ID 0xf1ad) 128 MiB MMC: MRVL_MMC: 0 Bad block table found at page 65472, version 0x01 Bad block table found at page 65408, version 0x01 nand_read_bbt: Bad block at 0x000001ea0000 Initialize and scan all PCI interfaces PEX unit.port(active IF[-first bus]): ------------------------------------------ PEX 0: Root Complex Interface, Detected Link X1, GEN 2.0 PEX 1: Root Complex Interface, Detected Link X1, GEN 2.0 FPU not initialized USB 0: Host Mode USB 1: Host Mode Shutting down unused interfaces: GBE0 SDIO AUDIO TDM Modules/Interfaces Detected: RGMII1 Phy PEX0 (Lane 0) PEX1 (Lane 1) SATA0 (Lane 2) SATA1 (Lane 3) Net: , egiga1 [PRIME] Power On! Loading FDT from NAND 0xEC000 to 0x1000000 failed! Hit any key to stop autoboot: 0 (Re)start USB... USB: Active port: 0 Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found reading /uImage-recovery 3159060 bytes read reading /initrd-recovery.gz 2729717 bytes read NAND read: device 0 offset 0xd4000, size 0x6000 24576 bytes read: OK ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux-3.0.101.RN_ARM.4 Created: 2015-04-01 23:06:44 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3158996 Bytes = 3 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: initrd-recovery Created: 2017-12-22 19:19:16 UTC Image Type: ARM Linux RAMDisk Image (lzma compressed) Data Size: 2729653 Bytes = 2.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ERROR: Did not find a cmdline Flattened Device Tree Could not find a valid device tree Marvell>> printenv AC_Power_fail_detect=open CASset=min HW_version=MVT MALLOC_len=5 Manufacturer=NETGEAR NANDboot=nand read.e 0x2000000 0x200000 0x400000;nand read.e 0x1000000 0x7e00000 0x20000;nand read.e 0x3000000 0x800000 0x400000;bootz 0x2000000 0x3000000 0x1000000 Product=ReadyNAS 102 SKUNum=RN102 USBboot=fatload usb 0:1 0x2000000 /zImage-recovery;fatload usb 0:1 0x1000000 /RN102-recovery.dtb;fatload usb 0:1 0x3000000 /initrd-recovery.gz;bootz 0x2000000 0x3000000 0x1000000 Version=V1.0 autoload=no baudrate=115200 bootargs=console=ttyS0,115200 bootargs_end=:10.4.50.254:255.255.255.0:KW40:eth0:none bootargs_root=root=/dev/nfs rw bootcmd=usb start;fatload usb 0:1 0x2000000 /uImage-recovery;fatload usb 0:1 0x3000000 /initrd-recovery.gz;nand read 0x1000000 0xD4000 0x6000; bootm 0x2000000 0x3000000 0x1000000 bootcmd_fdt=tftpboot 0x2000000 $image_name;tftpboot $fdtaddr $fdtfile;setenv bootargs $console $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr; bootcmd_ubi=ubi part ubifs; ubifsmount rootfs; ubifsload 0x2000000 kernel; ubifsload 0x3000000 initrd.gz; bootm 0x2000000 0x3000000 0x1000000 bootdelay=0 cacheShare=no check_usb=usb start; fatload usb 0:1 0x2000000 /NTGR_USBBOOT_INFO.txt console=console=ttyS0,115200 disL2Cache=yes disaMvPnp=no eeeEnable=no enaAutoRecovery=yes enaClockGating=yes enaFPU=no enaWrAllo=no envver=3 eth1addr=00:50:43:02:00:00 eth1mtu=1500 ethact=egiga1 ethaddr=00:50:43:02:02:00 ethmtu=1500 ethprime=egiga1 fdt_skip_update=no fdtaddr=0x1000000 fdtfile=armada-370-db.dtb filesize=29A6F5 image_name=uImage initrd_high=0xFFFFFFFF initrd_name=uInitrd ipaddr=192.168.82.234 loadaddr=0x02000000 loads_echo=0 mtdids=nand0=armada-nand mtdparts=mtdparts=armada-nand:0x180000@0(u-boot),0x20000@0x180000(u-boot-env),0x600000@0x200000(uImage),0x400000@0x800000(minirootfs),-(ubifs) mvNetConfig=switch_config=none mv_pon_addr=00:50:43:00:00:02 nandEcc=1bit netbsd_en=no netmask=255.255.255.0 netretry=no pcieTune=no pexMode=rc pxe_files_load=:default.arm-armada370-db:default.arm-armadaxp:default.arm pxefile_addr_r=3100000 rcvrip=169.254.100.100 rootpath=/srv/oneiric sata_delay_reset=0 sata_dma_mode=yes serverip=192.168.82.150 standalone=fsload 0x2000000 $image_name;setenv bootargs $console $mtdparts root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_end; bootm 0x2000000; stderr=serial stdin=serial stdout=serial usb0Mode=host usb1Mode=host usb2Mode=device usbActive=0 vxworks_en=no yuk_ethaddr=00:00:00:EE:51:81 Environment size: 2748/131068 bytes Marvell>>
====
moderator edit: please use code tags (Formatted code button) to post log.
Edited 1 time(s). Last edit at 01/29/2021 03:57PM by bodhi.
|
Re: Debian on Netgear RN102 January 27, 2021 02:13PM |
Registered: 4 years ago Posts: 73 |
|
Re: Debian on Netgear RN102 January 29, 2021 10:42AM |
Registered: 3 years ago Posts: 3 |
NAS is after full nand erase chip.I have normal comunication and flashing with recovery disc , uart mtd0 and debian , read ok. but not write in memory.After restart power all is deleted.Tftp comunication not work . How can I save uboot and partitions via console commands ?I think NAND it's blocked or broken.
|
Re: Debian on Netgear RN102 January 29, 2021 04:06PM |
Admin Registered: 13 years ago Posts: 18,543 |
makczo,
> NAS is after full nand erase chip.I have normal
> comunication and flashing with recovery disc ,
> uart mtd0 and debian , read ok. but not write in
> memory.After restart power all is deleted.Tftp
> comunication not work . How can I save uboot and
> partitions via console commands ?I think NAND it's
> blocked or broken.
Your NAND is not broken. You can still boot with stock u-boot on mtd0.
Your kernel on NAND is also OK.
But when loading initrd, it reads from USB:
And it has some problem finding the DTB:
You could install Debian on USB or HDD, and not restoring stock OS:
https://forum.doozan.com/read.php?2,92514
If you want to restore stock then investigate why the recovery FW on USB is not good. Perhaps recreate that recovery USB.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> NAS is after full nand erase chip.I have normal
> comunication and flashing with recovery disc ,
> uart mtd0 and debian , read ok. but not write in
> memory.After restart power all is deleted.Tftp
> comunication not work . How can I save uboot and
> partitions via console commands ?I think NAND it's
> blocked or broken.
Your NAND is not broken. You can still boot with stock u-boot on mtd0.
Your kernel on NAND is also OK.
NAND read: device 0 offset 0xd4000, size 0x6000 24576 bytes read: OK ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux-3.0.101.RN_ARM.4 Created: 2015-04-01 23:06:44 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3158996 Bytes = 3 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK
But when loading initrd, it reads from USB:
reading /initrd-recovery.gz
## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: initrd-recovery Created: 2017-12-22 19:19:16 UTC Image Type: ARM Linux RAMDisk Image (lzma compressed) Data Size: 2729653 Bytes = 2.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK
And it has some problem finding the DTB:
ERROR: Did not find a cmdline Flattened Device Tree Could not find a valid device tree
You could install Debian on USB or HDD, and not restoring stock OS:
https://forum.doozan.com/read.php?2,92514
If you want to restore stock then investigate why the recovery FW on USB is not good. Perhaps recreate that recovery USB.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Chris
Re: Debian on Netgear RN102 March 01, 2021 03:21PM |
Good Day. Wondering if someone could sort of share the current status of this project? I have an RN102 sitting around not doing anything at the moment that I'd love to flash with Debian with the goal of running OMV on it for an offsite NAS\Backup solution. I'm looking through the posts and trying to perceive the steps to flash the device with the Debian image. Is there a step by step somewhere? I'm assuming it's necessary to use the Netgear Recovery Tool at:
https://kb.netgear.com/29952/How-do-I-use-the-USB-Recovery-Tool-on-my-ReadyNAS-OS-6-storage-system
Thanks in advanced for any details that can be shared...
https://kb.netgear.com/29952/How-do-I-use-the-USB-Recovery-Tool-on-my-ReadyNAS-OS-6-storage-system
Thanks in advanced for any details that can be shared...
|
Re: Debian on Netgear RN102 March 01, 2021 04:55PM |
Admin Registered: 13 years ago Posts: 18,543 |
Chris,
See here in the rootfs/kernel release thread
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/01/2021 05:13PM by bodhi.
See here in the rootfs/kernel release thread
Quote
Netgear RN102 (Armada 370) Installation: see this thread
Quote
II. Netgear RN102 Intsallation
Updated 06 Sept 2020
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/01/2021 05:13PM by bodhi.
|
Re: Debian on Netgear RN102 December 14, 2023 01:39PM |
Admin Registered: 13 years ago Posts: 18,543 |
Hi Trond,
Somehow I've forgot this until now (I'm searching for this topic because I remember someone has suggested enhancements), thanks for the suggestion!
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Quote
https://forum.doozan.com/read.php?2,106589,106904#msg-106904
> A minor suggestion for your '/etc/rc.local'
> script: If you use -x rather than -f when testing
> for '/root/set_persistent_mac_address', one may
> disable and exnable this script with 'chmod -x'
> and 'chmod -x'. Nifty?
Somehow I've forgot this until now (I'm searching for this topic because I remember someone has suggested enhancements), thanks for the suggestion!
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Debian on Netgear RN102 December 16, 2023 04:58AM |
Registered: 6 years ago Posts: 157 |
