NSA325v2 (kirkwood) autopower-on /wakeup December 08, 2021 02:44PM |
Registered: 2 years ago Posts: 9 |
root@debian:~# rtcwake -s 60 rtcwake: /dev/rtc0 not enabled for wakeup events
Re: NSA325v2 (kirkwood) autopower-on /wakeup December 08, 2021 04:23PM |
Admin Registered: 13 years ago Posts: 18,821 |
> root@debian:~# rtcwake -s 60 > rtcwake: /dev/rtc0 not enabled for wakeup events > >
Re: NSA325v2 (kirkwood) autopower-on /wakeup December 08, 2021 06:13PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: NSA325v2 (kirkwood) autopower-on /wakeup December 09, 2021 10:47AM |
Registered: 2 years ago Posts: 9 |
Re: NSA325v2 (kirkwood) autopower-on /wakeup December 09, 2021 02:57PM |
Registered: 2 years ago Posts: 9 |
Quote
UART booting (kwboot through serial console) the stock u-boot (mtd0) and that most likely will boot into stock OS (the stock envs were untouched when you installed new u-boot). This is not something permanent, each time you want to boot stock, you would have to kwboot it.
Re: NSA325v2 (kirkwood) autopower-on /wakeup December 09, 2021 07:57PM |
Admin Registered: 13 years ago Posts: 18,821 |
>Quote
UART booting (kwboot through serial
> console) the stock u-boot (mtd0) and that most
> likely will boot into stock OS (the stock envs
> were untouched when you installed new u-boot).
> This is not something permanent, each time you
> want to boot stock, you would have to kwboot
> it.
>
>
Quote
UART Booting: If possible, try to test this boot image with UART booting before flashing to NAND. See davygravy's UART booting using kwboot instruction here in this thread. The latest u-boot image released here should be used for UART booting, if your box is the type that supports it (these do not: Dockstar, Pogo E02, iConnect).
Quote
3. Be sure to save your current uBoot image in mtd0, or have a backup image saved somewhere as precaution. And save your current u-boot envs with fw_printenv, or just copy/paste the listing into a text file. Note the nanddump command below allows future restoration to the same box you're backing up, and also can be used to restore a differrent box's mtd0 if needed.
Dumping NAND mtd0:
nanddump --noecc --omitoob -l 0x80000 -f mtd0 /dev/mtd0
kwboot -t -B 115200 /dev/ttyUSB0 -b mtd0 -p
Re: NSA325v2 (kirkwood) autopower-on /wakeup December 10, 2021 01:04PM |
Registered: 2 years ago Posts: 9 |
Re: NSA325v2 (kirkwood) autopower-on /wakeup December 13, 2021 07:39AM |
Registered: 2 years ago Posts: 9 |
Re: NSA325v2 (kirkwood) autopower-on /wakeup December 13, 2021 03:01PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: NSA325v2 (kirkwood) autopower-on /wakeup December 13, 2021 06:41PM |
Admin Registered: 13 years ago Posts: 18,821 |
shutdown -r now
Re: NSA325v2 (kirkwood) autopower-on /wakeup December 14, 2021 10:07AM |
Registered: 2 years ago Posts: 9 |
Re: NSA325v2 (kirkwood) autopower-on /wakeup December 14, 2021 03:34PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: NSA325v2 (kirkwood) autopower-on /wakeup December 15, 2021 12:13PM |
Registered: 2 years ago Posts: 9 |