Debian on Synology DS413J
Posted by jhackert
|
Re: Install Debian on Synology DS413J March 07, 2023 03:49PM |
Registered: 1 year ago Posts: 178 |
Hi
> It should be (no backslash before $2):
>
Without the backslash it's not working inside the alias myip=...
I'll do test and the two commands you asked tomorrow.
Minicom cut lines. How to configure it to not cut ? I tried to make my windows larger but it's not working.
See you tomorrow. BTW the Toshiba is 3.5".
> It should be (no backslash before $2):
>
> root@tldDebian:~# ifconfig | grep "inet "| grep
> -v '127.0.0.1' | cut -d: -f2 | awk '{ print $2}'
> 192.168.0.224
>
Without the backslash it's not working inside the alias myip=...
I'll do test and the two commands you asked tomorrow.
Minicom cut lines. How to configure it to not cut ? I tried to make my windows larger but it's not working.
See you tomorrow. BTW the Toshiba is 3.5".
|
Re: Install Debian on Synology DS413J March 07, 2023 04:58PM |
Admin Registered: 13 years ago Posts: 19,102 |
Billy,
> Minicom cut lines. How to configure it to not cut
> ? I tried to make my windows larger but it's not
> working.
Use picocom, it is better.
> BTW the Toshiba is 3.5".
Cool! So that regulator was a big differentce between this box and the DS411/DS413jv10.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/07/2023 05:47PM by bodhi.
> Minicom cut lines. How to configure it to not cut
> ? I tried to make my windows larger but it's not
> working.
Use picocom, it is better.
> BTW the Toshiba is 3.5".
Cool! So that regulator was a big differentce between this box and the DS411/DS413jv10.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/07/2023 05:47PM by bodhi.
|
Re: Install Debian on Synology DS413J March 07, 2023 06:44PM |
Admin Registered: 13 years ago Posts: 19,102 |
Billy,
What I was thinking is you need to set mtdparts in bootargs before booting
You should always post the entire log (from u-boot banner) so I can see what setenv commands you did.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
What I was thinking is you need to set mtdparts in bootargs before booting
setenv mtdparts 'mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root)'
You should always post the entire log (from u-boot banner) so I can see what setenv commands you did.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Install Debian on Synology DS413J March 08, 2023 04:16AM |
Registered: 1 year ago Posts: 178 |
root@debian:~# ls /dev/sd* /dev/sdc /dev/sdc1 /dev/sdc2 /dev/sdd /dev/sdd1 /dev/sdd2 /dev/sdd3 root@debian:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debia1 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=000539f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Synology DS413j [ 0.000000] printk: bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootl [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, ) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, l) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 490912K/524288K available (11264K kernel code, 1553K rwd) [ 0.000000] random: get_random_u32 called from ____cache_alloc+0x408/0x7b4 w0 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 ji. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xfs [ 0.000002] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 1073s [ 0.008516] Switching to timer-based delay loop, resolution 5ns [ 0.015790] Console: colour dummy device 80x30 [ 0.020984] Calibrating delay loop (skipped), value calculated using timer f) [ 0.032196] pid_max: default: 32768 minimum: 301 [ 0.037797] LSM: Security Framework initializing [ 0.043256] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, line) [ 0.051277] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes,) [ 0.060822] CPU: Testing write buffer coherency: ok [ 0.068206] Setting up static identity map for 0x100000 - 0x100058 [ 0.075359] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1 [ 0.081445] rcu: Hierarchical SRCU implementation. [ 0.087954] devtmpfs: initialized [ 0.099953] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms [ 0.110531] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.146047] prandom32: self test passed (less than 6 bits correlated) [ 0.153197] prandom: seed boundary self test passed [ 0.161918] prandom: 100 self tests passed [ 0.166695] pinctrl core: initialized pinctrl subsystem [ 0.173854] NET: Registered protocol family 16 [ 0.179594] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.187867] audit: initializing netlink subsys (disabled) [ 0.195069] thermal_sys: Registered thermal governor 'step_wise' [ 0.195393] audit: type=2000 audit(0.180:1): state=initialized audit_enabled1 [ 0.210638] cpuidle: using governor ladder [ 0.215482] cpuidle: using governor menu [ 0.220519] Feroceon L2: Enabling L2 [ 0.224797] Feroceon L2: Cache support initialised. [ 0.240444] No ATAGs? [ 2.568521] random: fast init done [ 3.893455] "cryptomgr_test" (39) uses obsolete ecb(arc4) skcipher [ 3.919762] wait_for_initramfs() called before rootfs_initcalls [ 4.108766] raid6: int32x8 gen() 150 MB/s [ 4.278548] raid6: int32x8 xor() 91 MB/s [ 4.448567] raid6: int32x4 gen() 145 MB/s [ 4.618583] raid6: int32x4 xor() 95 MB/s [ 4.788641] raid6: int32x2 gen() 187 MB/s [ 4.958622] raid6: int32x2 xor() 113 MB/s [ 5.128689] raid6: int32x1 gen() 130 MB/s [ 5.298648] raid6: int32x1 xor() 82 MB/s [ 5.303587] raid6: using algorithm int32x2 gen() 187 MB/s [ 5.309665] raid6: .... xor() 113 MB/s, rmw enabled [ 5.315208] raid6: using intx1 recovery algorithm [ 5.320808] vgaarb: loaded [ 5.324637] SCSI subsystem initialized [ 5.329277] libata version 3.00 loaded. [ 5.329500] usbcore: registered new interface driver usbfs [ 5.335702] usbcore: registered new interface driver hub [ 5.341756] usbcore: registered new device driver usb [ 5.347632] pps_core: LinuxPPS API ver. 1 registered [ 5.353284] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom> [ 5.363095] PTP clock support registered [ 5.369157] clocksource: Switched to clocksource orion_clocksource [ 5.459680] VFS: Disk quotas dquot_6.6.0 [ 5.464358] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 5.495546] NET: Registered protocol family 2 [ 5.509323] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linea) [ 5.529513] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096) [ 5.538555] TCP established hash table entries: 4096 (order: 2, 16384 bytes,) [ 5.559258] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 5.567110] TCP: Hash tables configured (established 4096 bind 4096) [ 5.589393] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linea) [ 5.597325] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 5.619191] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 5.627011] NET: Registered protocol family 1 [ 5.649718] RPC: Registered named UNIX socket transport module. [ 5.656307] RPC: Registered udp transport module. [ 5.669174] RPC: Registered tcp transport module. [ 5.674554] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.699178] PCI: CLS 0 bytes, default 32 [ 5.704008] NetWinder Floating Point Emulator V0.97 (double precision) [ 5.711487] Trying to unpack rootfs image as initramfs... [ 7.014811] Freeing initrd memory: 9448K [ 7.368552] Initialise system trusted keyrings [ 7.373760] Key type blacklist registered [ 7.378639] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 7.385904] zbud: loaded [ 7.390323] NFS: Registering the id_resolver key type [ 7.396063] Key type id_resolver registered [ 7.400983] Key type id_legacy registered [ 7.405694] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 7.413087] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registerin. [ 7.421155] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 7.428392] jffs2: version 2.2. (NAND) (SUMMARY) \xc2\xa9 2001-2006 Red Hat. [ 7.436494] fuse: init (API version 7.34) [ 7.441520] orangefs_debugfs_init: called with debug mask: :none: :0: [ 7.448788] orangefs_init: module version upstream loaded [ 7.454914] SGI XFS with ACLs, security attributes, realtime, scrub, quota, d [ 7.540774] xor: measuring software checksum speed [ 7.552929] arm4regs : 1485 MB/sec [ 7.569055] 8regs : 890 MB/sec [ 7.581750] 32regs : 1296 MB/sec [ 7.586777] xor: using function: arm4regs (1485 MB/sec) [ 7.592708] async_tx: api initialized (async) [ 7.597739] Key type asymmetric registered [ 7.602547] Asymmetric key parser 'x509' registered [ 7.608143] Block layer SCSI generic (bsg) driver version 0.4 loaded (major ) [ 7.616285] io scheduler bfq registered [ 7.770345] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl drir [ 7.779945] mvebu-pcie mbus@f1000000:pcie@82000000: host bridge /mbus@f10000: [ 7.789786] mvebu-pcie mbus@f1000000:pcie@82000000: Parsing ranges property.. [ 7.789817] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1040000..00 [ 7.799903] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1044000..00 [ 7.809983] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1080000..00 [ 7.820065] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xfffffffffffff0 [ 7.830663] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xfffffffffffff0 [ 7.841256] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xfffffffffffff0 [ 7.851842] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xfffffffffffff0 [ 7.862745] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 00 [ 7.870999] pci_bus 0000:00: root bus resource [bus 00-ff] [ 7.877162] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] () [ 7.888004] pci_bus 0000:00: root bus resource [mem 0xf1044000-0xf1045fff] () [ 7.898846] pci_bus 0000:00: root bus resource [mem 0xf1080000-0xf1081fff] () [ 7.909688] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 7.917224] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 7.924169] pci_bus 0000:00: scanning bus [ 7.924299] pci 0000:00:01.0: [11ab:6282] type 01 class 0x060400 [ 7.931014] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref] [ 7.938707] pci 0000:00:02.0: [11ab:6282] type 01 class 0x060400 [ 7.945426] pci 0000:00:02.0: reg 0x38: [mem 0x00000000-0x000007ff pref] [ 7.954505] pci_bus 0000:00: fixups for bus [ 7.954523] PCI: bus0: Fast back to back transfers disabled [ 7.960785] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 0 [ 7.960798] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reg [ 7.969483] pci 0000:00:02.0: scanning [bus 00-00] behind bridge, pass 0 [ 7.969496] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reg [ 7.978156] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 1 [ 7.978285] pci_bus 0000:01: scanning bus [ 7.978331] pci 0000:01:00.0: [11ab:7042] type 00 class 0x010000 [ 7.985045] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x900fffff 64bit] [ 7.992519] pci 0000:01:00.0: reg 0x18: [io 0xf0000000-0xf00000ff] [ 7.999586] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited b) [ 8.015258] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You ca' [ 8.027564] pci_bus 0000:01: fixups for bus [ 8.027579] PCI: bus1: Fast back to back transfers disabled [ 8.033844] pci_bus 0000:01: bus scan returning with max=01 [ 8.033857] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 8.041160] pci 0000:00:02.0: scanning [bus 00-00] behind bridge, pass 1 [ 8.041298] pci_bus 0000:02: scanning bus [ 8.042891] pci_bus 0000:02: fixups for bus [ 8.042899] PCI: bus2: Fast back to back transfers enabled [ 8.049053] pci_bus 0000:02: bus scan returning with max=02 [ 8.049063] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 8.056371] pci_bus 0000:00: bus scan returning with max=02 [ 8.056522] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff] [ 8.064089] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff] [ 8.071129] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pre] [ 8.079021] pci 0000:00:02.0: BAR 6: assigned [mem 0xe0200000-0xe02007ff pre] [ 8.086927] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64b] [ 8.094922] pci 0000:01:00.0: BAR 2: assigned [io 0x10000-0x100ff] [ 8.101880] pci 0000:00:01.0: PCI bridge to [bus 01] [ 8.107520] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff] [ 8.114467] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff] [ 8.121942] pci 0000:00:02.0: PCI bridge to [bus 02] [ 8.127649] pcieport 0000:00:01.0: assign IRQ: got 0 [ 8.127669] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 8.134457] pcieport 0000:00:01.0: enabling bus mastering [ 8.134529] pcieport 0000:00:02.0: assign IRQ: got 0 [ 8.134549] pcieport 0000:00:02.0: enabling bus mastering [ 8.134990] mv_xor f1060800.xor: Marvell shared XOR driver [ 8.200008] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy int) [ 8.210030] mv_xor f1060900.xor: Marvell shared XOR driver [ 8.270006] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy int) [ 8.280296] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 8.288482] printk: console [ttyS0] disabled [ 8.293566] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud =A [ 8.303271] printk: console [ttyS0] enabled [ 8.313094] printk: bootconsole [earlycon0] disabled [ 8.325120] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud =A [ 8.341814] loop: module loaded [ 8.345899] sata_mv 0000:01:00.0: assign IRQ: got 37 [ 8.345918] sata_mv 0000:01:00.0: version 1.28 [ 8.346025] pci 0000:00:01.0: enabling bus mastering [ 8.346171] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ viax [ 8.354452] sata_mv 0000:01:00.0: enabling Mem-Wr-Inval [ 8.360385] scsi host0: sata_mv [ 8.364768] scsi host1: sata_mv [ 8.369104] scsi host2: sata_mv [ 8.373483] scsi host3: sata_mv [ 8.377536] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe00220007 [ 8.385980] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe00240007 [ 8.394392] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe00260007 [ 8.402803] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe00280007 [ 8.412132] sata_mv f1080000.sata: version 1.28 [ 8.412536] sata_mv f1080000.sata: slots 32 ports 2 [ 8.421424] scsi host4: sata_mv [ 8.425800] scsi host5: sata_mv [ 8.429908] ata5: SATA max UDMA/133 irq 34 [ 8.434731] ata6: SATA max UDMA/133 irq 34 [ 8.441161] spi-nor spi0.0: found n25q064, expected m25p80 [ 8.447654] spi-nor spi0.0: n25q064 (8192 Kbytes) [ 8.453157] 6 fixed-partitions partitions found on MTD device spi0.0 [ 8.460261] Creating 6 MTD partitions on "spi0.0": [ 8.465787] 0x000000000000-0x000000080000 : "RedBoot" [ 8.472858] 0x000000080000-0x000000280000 : "zImage" [ 8.479748] 0x000000280000-0x0000003c0000 : "rd.gz" [ 8.486513] 0x0000003c0000-0x0000003d0000 : "vendor" [ 8.493375] 0x0000003d0000-0x0000003f0000 : "RedBoot config" [ 8.500955] 0x0000003f0000-0x000000400000 : "FIS directory" [ 8.508786] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for inf. [ 8.517397] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2. [ 8.528663] libphy: Fixed MDIO Bus: probed [ 8.534749] libphy: orion_mdio_bus: probed [ 8.539789] mdio_bus f1072004.mdio-bus-mii: MDIO device at address 8 is miss. [ 8.560999] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 8.570473] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC addresd [ 8.580172] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.587459] ehci-pci: EHCI PCI platform driver [ 8.592727] ehci-orion: EHCI orion driver [ 8.597612] orion-ehci f1050000.ehci: EHCI Host Controller [ 8.603913] orion-ehci f1050000.ehci: new USB bus registered, assigned bus n1 [ 8.612484] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000 [ 8.639177] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 8.646179] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, b3 [ 8.655230] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1 [ 8.663233] usb usb1: Product: EHCI Host Controller [ 8.668866] usb usb1: Manufacturer: Linux 5.13.6-kirkwood-tld-1 ehci_hcd [ 8.676339] usb usb1: SerialNumber: f1050000.ehci [ 8.682364] hub 1-0:1.0: USB hub found [ 8.686907] hub 1-0:1.0: 1 port detected [ 8.692279] usbcore: registered new interface driver usb-storage [ 8.699434] mousedev: PS/2 mouse device common for all mice [ 8.706003] i2c /dev entries driver [ 8.710905] i2c i2c-0: Not using recovery: no suitable method provided [ 8.711835] rtc-s35390a 0-0030: error resetting chip [ 8.718080] rtc-s35390a: probe of 0-0030 failed with error -5 [ 8.725321] device-mapper: uevent: version 1.0.3 [ 8.730971] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-m [ 8.740226] ata1: SATA link down (SStatus 0 SControl 300) [ 8.746753] device-mapper: multipath round-robin: version 1.2.0 loaded [ 8.754079] device-mapper: multipath queue-length: version 0.2.0 loaded [ 8.762000] device-mapper: multipath service-time: version 0.3.0 loaded [ 8.769399] ata5: SATA link down (SStatus 0 SControl F300) [ 8.775700] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 8.782552] device-mapper: raid: Loading target version 1.15.1 [ 8.791236] hid: raw HID events driver (C) Jiri Kosina [ 8.797426] drop_monitor: Initializing network drop monitor service [ 8.804830] NET: Registered protocol family 10 [ 8.811124] Segment Routing with IPv6 [ 8.815507] RPL Segment Routing with IPv6 [ 8.820375] NET: Registered protocol family 17 [ 8.825734] Key type dns_resolver registered [ 8.831336] registered taskstats version 1 [ 8.836160] Loading compiled-in X.509 certificates [ 8.842042] zswap: loaded using pool lzo/zbud [ 8.847404] Key type ._fscrypt registered [ 8.852199] Key type .fscrypt registered [ 8.856839] Key type fscrypt-provisioning registered [ 8.864085] Key type big_key registered [ 8.892263] Key type encrypted registered [ 8.979184] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 9.100711] ata2: SATA link down (SStatus 0 SControl 300) [ 9.180744] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bc2 [ 9.189690] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 9.197576] usb 1-1: Product: USB2.0 Hub [ 9.203041] hub 1-1:1.0: USB hub found [ 9.207869] hub 1-1:1.0: 4 ports detected [ 14.649189] ata3: link is slow to respond, please be patient (ready=0) [ 19.129240] ata3: SRST failed (errno=-16) [ 21.729203] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 21.740881] ata3.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 [ 21.747799] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 21.764551] ata3.00: configured for UDMA/133 [ 21.780006] scsi 2:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 P5 [ 21.789876] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/9) [ 21.798274] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 21.805151] sd 2:0:0:0: [sda] Write Protect is off [ 21.810743] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 21.810854] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doeA [ 21.840525] sda: sda1 sda2 sda3 [ 21.846016] sd 2:0:0:0: [sda] Attached SCSI disk [ 27.349177] ata4: link is slow to respond, please be patient (ready=0) [ 27.559204] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 27.570878] ata4.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133 [ 27.577791] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 27.592316] ata4.00: configured for UDMA/133 [ 27.607724] scsi 3:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC47 P5 [ 27.617590] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/9) [ 27.626370] sd 3:0:0:0: [sdb] 4096-byte physical blocks [ 27.632434] sd 3:0:0:0: [sdb] Write Protect is off [ 27.637954] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 27.638056] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doeA [ 27.672151] sdb: sdb1 sdb2 sdb3 [ 27.677640] sd 3:0:0:0: [sdb] Attached SCSI disk [ 27.960680] ata6: SATA link down (SStatus 0 SControl F300) [ 27.980008] Freeing unused kernel memory: 1024K [ 27.985975] Checked W+X mappings: passed, no W+X pages found [ 27.992391] Run /init as init process [ 27.996769] with arguments: [ 27.996776] /init [ 27.996783] with environment: [ 27.996788] HOME=/ [ 27.996793] TERM=linux [ 35.399205] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 35.410939] ata1.00: ATA-8: TOSHIBA DT01ACA100, MS2OA750, max UDMA/133 [ 35.418258] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 35.432827] ata1.00: configured for UDMA/133 [ 35.438266] scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA1 A750 P5 [ 35.451253] sd 0:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/9) [ 35.464249] sd 0:0:0:0: [sdc] 4096-byte physical blocks [ 35.470412] sd 0:0:0:0: [sdc] Write Protect is off [ 35.475997] sd 0:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 35.476108] sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doeA [ 35.513662] sdc: sdc1 sdc2 [ 35.523140] sd 0:0:0:0: [sdc] Attached SCSI disk [ 35.650906] random: crng init done [ 39.209602] reg-fixed-voltage regulators-hdd-30-4:regulator@3: nonexclusive 3 [ 39.550684] ata3: SATA link down (SStatus 0 SControl 300) [ 44.250711] reg-fixed-voltage regulators-hdd-30-4:regulator@4: nonexclusive 4 [ 44.569669] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 44.581431] ata2.00: supports DRM functions and may not be fully accessible [ 44.589208] ata2.00: ATA-9: ST1000DM003-1ER162, CC43, max UDMA/133 [ 44.596175] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 44.614433] ata2.00: supports DRM functions and may not be fully accessible [ 44.623673] ata2.00: configured for UDMA/133 [ 44.629105] scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC43 P5 [ 44.642153] sd 1:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/9) [ 44.655340] sd 1:0:0:0: [sdd] 4096-byte physical blocks [ 44.661515] sd 1:0:0:0: [sdd] Write Protect is off [ 44.667095] sd 1:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 44.667205] sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doeA [ 44.699361] sdd: sdd1 sdd2 sdd3 [ 44.710211] sd 1:0:0:0: [sdd] Attached SCSI disk [ 44.900911] ata3: SATA link down (SStatus 0 SControl 300) [ 49.929671] ata4: SATA link down (SStatus 0 SControl 300) [ 55.300690] ata3: SATA link down (SStatus 0 SControl 300) [ 55.306872] ata3.00: disabled [ 55.310623] ata4: SATA link down (SStatus 0 SControl 300) [ 55.316793] ata3.00: detaching (SCSI 2:0:0:0) [ 55.336743] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 55.348028] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyteK [ 55.369250] sd 2:0:0:0: [sda] Stopping disk [ 55.379266] sd 2:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BK [ 60.660819] ata4: SATA link down (SStatus 0 SControl 300) [ 60.667633] ata4.00: disabled [ 60.672210] ata4.00: detaching (SCSI 3:0:0:0) [ 60.691359] sd 3:0:0:0: [sdb] Synchronizing SCSI cache [ 60.706178] EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystm [ 60.714340] sd 3:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyteK [ 60.738766] sd 3:0:0:0: [sdb] Stopping disk [ 60.750925] sd 3:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BK [ 61.037170] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts:. [ 62.306870] systemd[1]: System time before build time, advancing clock. [ 62.460225] systemd[1]: Inserted module 'autofs4' [ 62.604606] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PA) [ 62.629327] systemd[1]: Detected architecture arm. [ 62.706263] systemd[1]: Set hostname to <debian>. [ 64.389376] systemd[1]: Queued start job for default target Graphical Interf. [ 64.399894] systemd[1]: system-getty.slice: unit configures an IP firewall, . [ 64.413112] systemd[1]: (This warning is only shown for the first unit using) [ 64.423982] systemd[1]: Created slice system-getty.slice. [ 64.460323] systemd[1]: Created slice system-modprobe.slice. [ 64.500292] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 64.540092] systemd[1]: Created slice User and Session Slice. [ 64.579777] systemd[1]: Started Dispatch Password Requests to Console Direct. [ 64.619712] systemd[1]: Started Forward Password Requests to Wall Directory . [ 64.660377] systemd[1]: Set up automount Arbitrary Executable File Formats F. [ 64.699626] systemd[1]: Reached target Local Encrypted Volumes. [ 64.739802] systemd[1]: Reached target Paths. [ 64.779688] systemd[1]: Reached target Slices. [ 64.810988] systemd[1]: Listening on RPCbind Server Activation Socket. [ 64.850089] systemd[1]: Listening on fsck to fsckd communication Socket. [ 64.889786] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 64.930475] systemd[1]: Listening on Journal Audit Socket. [ 64.970144] systemd[1]: Listening on Journal Socket (/dev/log). [ 65.010264] systemd[1]: Listening on Journal Socket. [ 65.050298] systemd[1]: Listening on udev Control Socket. [ 65.090027] systemd[1]: Listening on udev Kernel Socket. [ 65.130322] systemd[1]: Condition check resulted in Huge Pages File System b. [ 65.142940] systemd[1]: Mounting POSIX Message Queue File System... [ 65.182506] systemd[1]: Mounting NFSD configuration filesystem... [ 65.232619] systemd[1]: Mounting RPC Pipe File System... [ 65.252734] systemd[1]: Mounting Kernel Debug File System... [ 65.302941] systemd[1]: Mounting Kernel Trace File System... [ 65.349644] systemd[1]: Condition check resulted in Kernel Module supporting. [ 65.364776] systemd[1]: Starting Create list of static device nodes for the . [ 65.413390] systemd[1]: Starting Load Kernel Module configfs... [ 65.463462] systemd[1]: Starting Load Kernel Module drm... [ 65.513399] systemd[1]: Starting Load Kernel Module fuse... [ 65.580681] systemd[1]: Condition check resulted in Set Up Additional Binary. [ 65.590917] systemd[1]: Condition check resulted in File System Check on Roo. [ 65.604805] systemd[1]: Starting Journal Service... [ 65.660266] systemd[1]: Starting Load Kernel Modules... [ 65.694319] systemd[1]: Starting Remount Root and Kernel File Systems... [ 65.733046] systemd[1]: Starting Coldplug All udev Devices... [ 65.847937] systemd[1]: Mounted POSIX Message Queue File System. [ 65.900060] systemd[1]: Mounted NFSD configuration filesystem. [ 65.939987] systemd[1]: Mounted RPC Pipe File System. [ 65.980123] systemd[1]: Mounted Kernel Debug File System. [ 66.030410] systemd[1]: Mounted Kernel Trace File System. [ 66.039464] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro. Quota mode:. [ 66.070875] systemd[1]: Finished Create list of static device nodes for the . [ 66.137219] systemd[1]: modprobe@configfs.service: Succeeded. [ 66.189574] systemd[1]: Finished Load Kernel Module configfs. [ 66.231252] systemd[1]: modprobe@drm.service: Succeeded. [ 66.249429] systemd[1]: Finished Load Kernel Module drm. [ 66.281628] systemd[1]: modprobe@fuse.service: Succeeded. [ 66.309727] systemd[1]: Finished Load Kernel Module fuse. [ 66.351504] systemd[1]: Finished Load Kernel Modules. [ 66.371159] systemd[1]: Finished Remount Root and Kernel File Systems. [ 66.390389] systemd[1]: Started Journal Service. [ 66.959293] Adding 524284k swap on /swapfile1. Priority:-2 extents:22 acrosS [ 66.988191] systemd-journald[225]: Received client request to flush runtime . [ 67.203475] systemd-journald[225]: File /var/log/journal/c4334d5b2fba8bce529. [ 70.197390] gpio-fan gpio-fan-100-15-35-1: GPIO fan initialized [ 70.525983] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 70.821098] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 71.431737] orion_wdt: Initial timeout 21 sec [ 72.030866] marvell-cesa f1030000.crypto: CESA device successfully registered [ 76.387706] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, fud [ 76.398340] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 82.496526] NFSD: Using UMH upcall client tracking operations. [ 82.503254] NFSD: starting 90-second grace period (net f000001c) root@debian:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sat Jul 3 1 22:10:39 PDT 2021 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397 f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Synology DS413j [ 0.000000] printk: bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootd elay=10 earlyprintk=serial [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, l inear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, li near) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 490912K/524288K available (11264K kernel code, 1553K rwda ta, 4272K rodata, 1024K init, 309K bss, 33376K reserved, 0K cma-reserved) [ 0.000000] random: get_random_u32 called from ____cache_alloc+0x408/0x7b4 wi th crng_init=0 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xff ffffff, max_idle_ns: 9556302233 ns [ 0.000002] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737 418237ns [ 0.008516] Switching to timer-based delay loop, resolution 5ns [ 0.015790] Console: colour dummy device 80x30 [ 0.020984] Calibrating delay loop (skipped), value calculated using timer fr equency.. 400.00 BogoMIPS (lpj=2000000) [ 0.032196] pid_max: default: 32768 minimum: 301 [ 0.037797] LSM: Security Framework initializing [ 0.043256] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linea r) [ 0.051277] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.060822] CPU: Testing write buffer coherency: ok [ 0.068206] Setting up static identity map for 0x100000 - 0x100058 [ 0.075359] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1 [ 0.081445] rcu: Hierarchical SRCU implementation. [ 0.087954] devtmpfs: initialized [ 0.099953] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns [ 0.110531] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.146047] prandom32: self test passed (less than 6 bits correlated) [ 0.153197] prandom: seed boundary self test passed [ 0.161918] prandom: 100 self tests passed [ 0.166695] pinctrl core: initialized pinctrl subsystem [ 0.173854] NET: Registered protocol family 16 [ 0.179594] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.187867] audit: initializing netlink subsys (disabled) [ 0.195069] thermal_sys: Registered thermal governor 'step_wise' [ 0.195393] audit: type=2000 audit(0.180:1): state=initialized audit_enabled= 0 res=1 [ 0.210638] cpuidle: using governor ladder [ 0.215482] cpuidle: using governor menu [ 0.220519] Feroceon L2: Enabling L2 [ 0.224797] Feroceon L2: Cache support initialised. [ 0.240444] No ATAGs? [ 2.568521] random: fast init done [ 3.893455] "cryptomgr_test" (39) uses obsolete ecb(arc4) skcipher [ 3.919762] wait_for_initramfs() called before rootfs_initcalls [ 4.108766] raid6: int32x8 gen() 150 MB/s [ 4.278548] raid6: int32x8 xor() 91 MB/s [ 4.448567] raid6: int32x4 gen() 145 MB/s [ 4.618583] raid6: int32x4 xor() 95 MB/s [ 4.788641] raid6: int32x2 gen() 187 MB/s [ 4.958622] raid6: int32x2 xor() 113 MB/s [ 5.128689] raid6: int32x1 gen() 130 MB/s [ 5.298648] raid6: int32x1 xor() 82 MB/s [ 5.303587] raid6: using algorithm int32x2 gen() 187 MB/s [ 5.309665] raid6: .... xor() 113 MB/s, rmw enabled [ 5.315208] raid6: using intx1 recovery algorithm [ 5.320808] vgaarb: loaded [ 5.324637] SCSI subsystem initialized [ 5.329277] libata version 3.00 loaded. [ 5.329500] usbcore: registered new interface driver usbfs [ 5.335702] usbcore: registered new interface driver hub [ 5.341756] usbcore: registered new device driver usb [ 5.347632] pps_core: LinuxPPS API ver. 1 registered [ 5.353284] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti@linux.it> [ 5.363095] PTP clock support registered [ 5.369157] clocksource: Switched to clocksource orion_clocksource [ 5.459680] VFS: Disk quotas dquot_6.6.0 [ 5.464358] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 5.495546] NET: Registered protocol family 2 [ 5.509323] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear ) [ 5.529513] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 5.538555] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 5.559258] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 5.567110] TCP: Hash tables configured (established 4096 bind 4096) [ 5.589393] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear ) [ 5.597325] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 5.619191] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 5.627011] NET: Registered protocol family 1 [ 5.649718] RPC: Registered named UNIX socket transport module. [ 5.656307] RPC: Registered udp transport module. [ 5.669174] RPC: Registered tcp transport module. [ 5.674554] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.699178] PCI: CLS 0 bytes, default 32 [ 5.704008] NetWinder Floating Point Emulator V0.97 (double precision) [ 5.711487] Trying to unpack rootfs image as initramfs... [ 7.014811] Freeing initrd memory: 9448K [ 7.368552] Initialise system trusted keyrings [ 7.373760] Key type blacklist registered [ 7.378639] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 7.385904] zbud: loaded [ 7.390323] NFS: Registering the id_resolver key type [ 7.396063] Key type id_resolver registered [ 7.400983] Key type id_legacy registered [ 7.405694] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 7.413087] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering ... [ 7.421155] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 7.428392] jffs2: version 2.2. (NAND) (SUMMARY) \xc2\xa9 2001-2006 Red Hat, Inc. [ 7.436494] fuse: init (API version 7.34) [ 7.441520] orangefs_debugfs_init: called with debug mask: :none: :0: [ 7.448788] orangefs_init: module version upstream loaded [ 7.454914] SGI XFS with ACLs, security attributes, realtime, scrub, quota, n o debug enabled [ 7.540774] xor: measuring software checksum speed [ 7.552929] arm4regs : 1485 MB/sec [ 7.569055] 8regs : 890 MB/sec [ 7.581750] 32regs : 1296 MB/sec [ 7.586777] xor: using function: arm4regs (1485 MB/sec) [ 7.592708] async_tx: api initialized (async) [ 7.597739] Key type asymmetric registered [ 7.602547] Asymmetric key parser 'x509' registered [ 7.608143] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 46) [ 7.616285] io scheduler bfq registered [ 7.770345] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driv er [ 7.779945] mvebu-pcie mbus@f1000000:pcie@82000000: host bridge /mbus@f100000 0/pcie@82000000 ranges: [ 7.789786] mvebu-pcie mbus@f1000000:pcie@82000000: Parsing ranges property.. . [ 7.789817] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1040000..0x 00f1041fff -> 0x0000040000 [ 7.799903] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1044000..0x 00f1045fff -> 0x0000044000 [ 7.809983] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1080000..0x 00f1081fff -> 0x0000080000 [ 7.820065] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffff ff..0x00fffffffe -> 0x0100000000 [ 7.830663] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffff ff..0x00fffffffe -> 0x0100000000 [ 7.841256] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffff ff..0x00fffffffe -> 0x0200000000 [ 7.851842] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffff ff..0x00fffffffe -> 0x0200000000 [ 7.862745] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 00 00:00 [ 7.870999] pci_bus 0000:00: root bus resource [bus 00-ff] [ 7.877162] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (b us address [0x00040000-0x00041fff]) [ 7.888004] pci_bus 0000:00: root bus resource [mem 0xf1044000-0xf1045fff] (b us address [0x00044000-0x00045fff]) [ 7.898846] pci_bus 0000:00: root bus resource [mem 0xf1080000-0xf1081fff] (b us address [0x00080000-0x00081fff]) [ 7.909688] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 7.917224] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 7.924169] pci_bus 0000:00: scanning bus [ 7.924299] pci 0000:00:01.0: [11ab:6282] type 01 class 0x060400 [ 7.931014] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref] [ 7.938707] pci 0000:00:02.0: [11ab:6282] type 01 class 0x060400 [ 7.945426] pci 0000:00:02.0: reg 0x38: [mem 0x00000000-0x000007ff pref] [ 7.954505] pci_bus 0000:00: fixups for bus [ 7.954523] PCI: bus0: Fast back to back transfers disabled [ 7.960785] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 0 [ 7.960798] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), rec onfiguring [ 7.969483] pci 0000:00:02.0: scanning [bus 00-00] behind bridge, pass 0 [ 7.969496] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), rec onfiguring [ 7.978156] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 1 [ 7.978285] pci_bus 0000:01: scanning bus [ 7.978331] pci 0000:01:00.0: [11ab:7042] type 00 class 0x010000 [ 7.985045] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x900fffff 64bit] [ 7.992519] pci 0000:01:00.0: reg 0x18: [io 0xf0000000-0xf00000ff] [ 7.999586] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 8.000 Gb/s with 2.5 GT/s PCIe x4 link) [ 8.015258] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 8.027564] pci_bus 0000:01: fixups for bus [ 8.027579] PCI: bus1: Fast back to back transfers disabled [ 8.033844] pci_bus 0000:01: bus scan returning with max=01 [ 8.033857] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 8.041160] pci 0000:00:02.0: scanning [bus 00-00] behind bridge, pass 1 [ 8.041298] pci_bus 0000:02: scanning bus [ 8.042891] pci_bus 0000:02: fixups for bus [ 8.042899] PCI: bus2: Fast back to back transfers enabled [ 8.049053] pci_bus 0000:02: bus scan returning with max=02 [ 8.049063] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 8.056371] pci_bus 0000:00: bus scan returning with max=02 [ 8.056522] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff] [ 8.064089] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff] [ 8.071129] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pref ] [ 8.079021] pci 0000:00:02.0: BAR 6: assigned [mem 0xe0200000-0xe02007ff pref ] [ 8.086927] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bi t] [ 8.094922] pci 0000:01:00.0: BAR 2: assigned [io 0x10000-0x100ff] [ 8.101880] pci 0000:00:01.0: PCI bridge to [bus 01] [ 8.107520] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff] [ 8.114467] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff] [ 8.121942] pci 0000:00:02.0: PCI bridge to [bus 02] [ 8.127649] pcieport 0000:00:01.0: assign IRQ: got 0 [ 8.127669] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 8.134457] pcieport 0000:00:01.0: enabling bus mastering [ 8.134529] pcieport 0000:00:02.0: assign IRQ: got 0 [ 8.134549] pcieport 0000:00:02.0: enabling bus mastering [ 8.134990] mv_xor f1060800.xor: Marvell shared XOR driver [ 8.200008] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 8.210030] mv_xor f1060900.xor: Marvell shared XOR driver [ 8.270006] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 8.280296] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 8.288482] printk: console [ttyS0] disabled [ 8.293566] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A [ 8.303271] printk: console [ttyS0] enabled [ 8.313094] printk: bootconsole [earlycon0] disabled [ 8.325120] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 12500000) is a 16550A [ 8.341814] loop: module loaded [ 8.345899] sata_mv 0000:01:00.0: assign IRQ: got 37 [ 8.345918] sata_mv 0000:01:00.0: version 1.28 [ 8.346025] pci 0000:00:01.0: enabling bus mastering [ 8.346171] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx [ 8.354452] sata_mv 0000:01:00.0: enabling Mem-Wr-Inval [ 8.360385] scsi host0: sata_mv [ 8.364768] scsi host1: sata_mv [ 8.369104] scsi host2: sata_mv [ 8.373483] scsi host3: sata_mv [ 8.377536] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 37 [ 8.385980] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 37 [ 8.394392] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 37 [ 8.402803] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 37 [ 8.412132] sata_mv f1080000.sata: version 1.28 [ 8.412536] sata_mv f1080000.sata: slots 32 ports 2 [ 8.421424] scsi host4: sata_mv [ 8.425800] scsi host5: sata_mv [ 8.429908] ata5: SATA max UDMA/133 irq 34 [ 8.434731] ata6: SATA max UDMA/133 irq 34 [ 8.441161] spi-nor spi0.0: found n25q064, expected m25p80 [ 8.447654] spi-nor spi0.0: n25q064 (8192 Kbytes) [ 8.453157] 6 fixed-partitions partitions found on MTD device spi0.0 [ 8.460261] Creating 6 MTD partitions on "spi0.0": [ 8.465787] 0x000000000000-0x000000080000 : "RedBoot" [ 8.472858] 0x000000080000-0x000000280000 : "zImage" [ 8.479748] 0x000000280000-0x0000003c0000 : "rd.gz" [ 8.486513] 0x0000003c0000-0x0000003d0000 : "vendor" [ 8.493375] 0x0000003d0000-0x0000003f0000 : "RedBoot config" [ 8.500955] 0x0000003f0000-0x000000400000 : "FIS directory" [ 8.508786] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for info rmation. [ 8.517397] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c 4.com>. All Rights Reserved. [ 8.528663] libphy: Fixed MDIO Bus: probed [ 8.534749] libphy: orion_mdio_bus: probed [ 8.539789] mdio_bus f1072004.mdio-bus-mii: MDIO device at address 8 is missi ng. [ 8.560999] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 8.570473] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:3c:3b:5d [ 8.580172] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.587459] ehci-pci: EHCI PCI platform driver [ 8.592727] ehci-orion: EHCI orion driver [ 8.597612] orion-ehci f1050000.ehci: EHCI Host Controller [ 8.603913] orion-ehci f1050000.ehci: new USB bus registered, assigned bus nu mber 1 [ 8.612484] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000 [ 8.639177] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 8.646179] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.13 [ 8.655230] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 8.663233] usb usb1: Product: EHCI Host Controller [ 8.668866] usb usb1: Manufacturer: Linux 5.13.6-kirkwood-tld-1 ehci_hcd [ 8.676339] usb usb1: SerialNumber: f1050000.ehci [ 8.682364] hub 1-0:1.0: USB hub found [ 8.686907] hub 1-0:1.0: 1 port detected [ 8.692279] usbcore: registered new interface driver usb-storage [ 8.699434] mousedev: PS/2 mouse device common for all mice [ 8.706003] i2c /dev entries driver [ 8.710905] i2c i2c-0: Not using recovery: no suitable method provided [ 8.711835] rtc-s35390a 0-0030: error resetting chip [ 8.718080] rtc-s35390a: probe of 0-0030 failed with error -5 [ 8.725321] device-mapper: uevent: version 1.0.3 [ 8.730971] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-d evel@redhat.com [ 8.740226] ata1: SATA link down (SStatus 0 SControl 300) [ 8.746753] device-mapper: multipath round-robin: version 1.2.0 loaded [ 8.754079] device-mapper: multipath queue-length: version 0.2.0 loaded [ 8.762000] device-mapper: multipath service-time: version 0.3.0 loaded [ 8.769399] ata5: SATA link down (SStatus 0 SControl F300) [ 8.775700] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 8.782552] device-mapper: raid: Loading target version 1.15.1 [ 8.791236] hid: raw HID events driver (C) Jiri Kosina [ 8.797426] drop_monitor: Initializing network drop monitor service [ 8.804830] NET: Registered protocol family 10 [ 8.811124] Segment Routing with IPv6 [ 8.815507] RPL Segment Routing with IPv6 [ 8.820375] NET: Registered protocol family 17 [ 8.825734] Key type dns_resolver registered [ 8.831336] registered taskstats version 1 [ 8.836160] Loading compiled-in X.509 certificates [ 8.842042] zswap: loaded using pool lzo/zbud [ 8.847404] Key type ._fscrypt registered [ 8.852199] Key type .fscrypt registered [ 8.856839] Key type fscrypt-provisioning registered [ 8.864085] Key type big_key registered [ 8.892263] Key type encrypted registered [ 8.979184] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 9.100711] ata2: SATA link down (SStatus 0 SControl 300) [ 9.180744] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcd Device=85.32 [ 9.189690] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 9.197576] usb 1-1: Product: USB2.0 Hub [ 9.203041] hub 1-1:1.0: USB hub found [ 9.207869] hub 1-1:1.0: 4 ports detected [ 14.649189] ata3: link is slow to respond, please be patient (ready=0) [ 19.129240] ata3: SRST failed (errno=-16) [ 21.729203] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 21.740881] ata3.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 [ 21.747799] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 21.764551] ata3.00: configured for UDMA/133 [ 21.780006] scsi 2:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ : 0 ANSI: 5 [ 21.789876] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/93 2 GiB) [ 21.798274] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 21.805151] sd 2:0:0:0: [sda] Write Protect is off [ 21.810743] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 21.810854] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 21.840525] sda: sda1 sda2 sda3 [ 21.846016] sd 2:0:0:0: [sda] Attached SCSI disk [ 27.349177] ata4: link is slow to respond, please be patient (ready=0) [ 27.559204] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 27.570878] ata4.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133 [ 27.577791] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 27.592316] ata4.00: configured for UDMA/133 [ 27.607724] scsi 3:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC47 PQ : 0 ANSI: 5 [ 27.617590] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/93 2 GiB) [ 27.626370] sd 3:0:0:0: [sdb] 4096-byte physical blocks [ 27.632434] sd 3:0:0:0: [sdb] Write Protect is off [ 27.637954] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 27.638056] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 27.672151] sdb: sdb1 sdb2 sdb3 [ 27.677640] sd 3:0:0:0: [sdb] Attached SCSI disk [ 27.960680] ata6: SATA link down (SStatus 0 SControl F300) [ 27.980008] Freeing unused kernel memory: 1024K [ 27.985975] Checked W+X mappings: passed, no W+X pages found [ 27.992391] Run /init as init process [ 27.996769] with arguments: [ 27.996776] /init [ 27.996783] with environment: [ 27.996788] HOME=/ [ 27.996793] TERM=linux [ 35.399205] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 35.410939] ata1.00: ATA-8: TOSHIBA DT01ACA100, MS2OA750, max UDMA/133 [ 35.418258] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 35.432827] ata1.00: configured for UDMA/133 [ 35.438266] scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA1 A750 PQ : 0 ANSI: 5 [ 35.451253] sd 0:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/93 2 GiB) [ 35.464249] sd 0:0:0:0: [sdc] 4096-byte physical blocks [ 35.470412] sd 0:0:0:0: [sdc] Write Protect is off [ 35.475997] sd 0:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 35.476108] sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 35.513662] sdc: sdc1 sdc2 [ 35.523140] sd 0:0:0:0: [sdc] Attached SCSI disk [ 35.650906] random: crng init done [ 39.209602] reg-fixed-voltage regulators-hdd-30-4:regulator@3: nonexclusive a ccess to GPIO for regulators-hdd-30-4:regulator@3 [ 39.550684] ata3: SATA link down (SStatus 0 SControl 300) [ 44.250711] reg-fixed-voltage regulators-hdd-30-4:regulator@4: nonexclusive a ccess to GPIO for regulators-hdd-30-4:regulator@4 [ 44.569669] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 44.581431] ata2.00: supports DRM functions and may not be fully accessible [ 44.589208] ata2.00: ATA-9: ST1000DM003-1ER162, CC43, max UDMA/133 [ 44.596175] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 44.614433] ata2.00: supports DRM functions and may not be fully accessible [ 44.623673] ata2.00: configured for UDMA/133 [ 44.629105] scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC43 PQ : 0 ANSI: 5 [ 44.642153] sd 1:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/93 2 GiB) [ 44.655340] sd 1:0:0:0: [sdd] 4096-byte physical blocks [ 44.661515] sd 1:0:0:0: [sdd] Write Protect is off [ 44.667095] sd 1:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 44.667205] sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 44.699361] sdd: sdd1 sdd2 sdd3 [ 44.710211] sd 1:0:0:0: [sdd] Attached SCSI disk [ 44.900911] ata3: SATA link down (SStatus 0 SControl 300) [ 49.929671] ata4: SATA link down (SStatus 0 SControl 300) [ 55.300690] ata3: SATA link down (SStatus 0 SControl 300) [ 55.306872] ata3.00: disabled [ 55.310623] ata4: SATA link down (SStatus 0 SControl 300) [ 55.316793] ata3.00: detaching (SCSI 2:0:0:0) [ 55.336743] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 55.348028] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte= DID_BAD_TARGET driverbyte=DRIVER_OK [ 55.369250] sd 2:0:0:0: [sda] Stopping disk [ 55.379266] sd 2:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BA D_TARGET driverbyte=DRIVER_OK [ 60.660819] ata4: SATA link down (SStatus 0 SControl 300) [ 60.667633] ata4.00: disabled [ 60.672210] ata4.00: detaching (SCSI 3:0:0:0) [ 60.691359] sd 3:0:0:0: [sdb] Synchronizing SCSI cache [ 60.706178] EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsyste m [ 60.714340] sd 3:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte= DID_BAD_TARGET driverbyte=DRIVER_OK [ 60.738766] sd 3:0:0:0: [sdb] Stopping disk [ 60.750925] sd 3:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BA D_TARGET driverbyte=DRIVER_OK [ 61.037170] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 62.306870] systemd[1]: System time before build time, advancing clock. [ 62.460225] systemd[1]: Inserted module 'autofs4' [ 62.604606] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +G NUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 defa ult-hierarchy=unified) [ 62.629327] systemd[1]: Detected architecture arm. [ 62.706263] systemd[1]: Set hostname to <debian>. [ 64.389376] systemd[1]: Queued start job for default target Graphical Interfa ce. [ 64.399894] systemd[1]: system-getty.slice: unit configures an IP firewall, b ut the local system does not support BPF/cgroup firewalling. [ 64.413112] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 64.423982] systemd[1]: Created slice system-getty.slice. [ 64.460323] systemd[1]: Created slice system-modprobe.slice. [ 64.500292] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 64.540092] systemd[1]: Created slice User and Session Slice. [ 64.579777] systemd[1]: Started Dispatch Password Requests to Console Directo ry Watch. [ 64.619712] systemd[1]: Started Forward Password Requests to Wall Directory W atch. [ 64.660377] systemd[1]: Set up automount Arbitrary Executable File Formats Fi le System Automount Point. [ 64.699626] systemd[1]: Reached target Local Encrypted Volumes. [ 64.739802] systemd[1]: Reached target Paths. [ 64.779688] systemd[1]: Reached target Slices. [ 64.810988] systemd[1]: Listening on RPCbind Server Activation Socket. [ 64.850089] systemd[1]: Listening on fsck to fsckd communication Socket. [ 64.889786] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 64.930475] systemd[1]: Listening on Journal Audit Socket. [ 64.970144] systemd[1]: Listening on Journal Socket (/dev/log). [ 65.010264] systemd[1]: Listening on Journal Socket. [ 65.050298] systemd[1]: Listening on udev Control Socket. [ 65.090027] systemd[1]: Listening on udev Kernel Socket. [ 65.130322] systemd[1]: Condition check resulted in Huge Pages File System be ing skipped. [ 65.142940] systemd[1]: Mounting POSIX Message Queue File System... [ 65.182506] systemd[1]: Mounting NFSD configuration filesystem... [ 65.232619] systemd[1]: Mounting RPC Pipe File System... [ 65.252734] systemd[1]: Mounting Kernel Debug File System... [ 65.302941] systemd[1]: Mounting Kernel Trace File System... [ 65.349644] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 65.364776] systemd[1]: Starting Create list of static device nodes for the c urrent kernel... [ 65.413390] systemd[1]: Starting Load Kernel Module configfs... [ 65.463462] systemd[1]: Starting Load Kernel Module drm... [ 65.513399] systemd[1]: Starting Load Kernel Module fuse... [ 65.580681] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 65.590917] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 65.604805] systemd[1]: Starting Journal Service... [ 65.660266] systemd[1]: Starting Load Kernel Modules... [ 65.694319] systemd[1]: Starting Remount Root and Kernel File Systems... [ 65.733046] systemd[1]: Starting Coldplug All udev Devices... [ 65.847937] systemd[1]: Mounted POSIX Message Queue File System. [ 65.900060] systemd[1]: Mounted NFSD configuration filesystem. [ 65.939987] systemd[1]: Mounted RPC Pipe File System. [ 65.980123] systemd[1]: Mounted Kernel Debug File System. [ 66.030410] systemd[1]: Mounted Kernel Trace File System. [ 66.039464] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro. Quota mode: none. [ 66.070875] systemd[1]: Finished Create list of static device nodes for the c urrent kernel. [ 66.137219] systemd[1]: modprobe@configfs.service: Succeeded. [ 66.189574] systemd[1]: Finished Load Kernel Module configfs. [ 66.231252] systemd[1]: modprobe@drm.service: Succeeded. [ 66.249429] systemd[1]: Finished Load Kernel Module drm. [ 66.281628] systemd[1]: modprobe@fuse.service: Succeeded. [ 66.309727] systemd[1]: Finished Load Kernel Module fuse. [ 66.351504] systemd[1]: Finished Load Kernel Modules. [ 66.371159] systemd[1]: Finished Remount Root and Kernel File Systems. [ 66.390389] systemd[1]: Started Journal Service. [ 66.959293] Adding 524284k swap on /swapfile1. Priority:-2 extents:22 across :27921988k FS [ 66.988191] systemd-journald[225]: Received client request to flush runtime j ournal. [ 67.203475] systemd-journald[225]: File /var/log/journal/c4334d5b2fba8bce5294 b56551baee86/system.journal corrupted or uncleanly shut down, renaming and repla cing. [ 70.197390] gpio-fan gpio-fan-100-15-35-1: GPIO fan initialized [ 70.525983] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 70.821098] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 71.431737] orion_wdt: Initial timeout 21 sec [ 72.030866] marvell-cesa f1030000.crypto: CESA device successfully registered [ 76.387706] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, ful l duplex, flow control disabled [ 76.398340] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 82.496526] NFSD: Using UMH upcall client tracking operations. [ 82.503254] NFSD: starting 90-second grace period (net f000001c)
The server freezes because when i put the fourth disk, the sda (first one) is no more detected. Is it because 3 are raid disks from nom (i don't delete previous raid from synology)
In fact, with 3 disks, i can't see my first one : only sdb and sdc
root@debian:~# fdisk -l | grep "/dev/sd*" Disk /dev/sdb: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors /dev/sdb1 2048 209717247 209715200 100G 83 Linux /dev/sdb2 209717248 1953525167 1743807920 831.5G 83 Linux Disk /dev/sdc: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors /dev/sdc1 2048 4982527 4980480 2.4G fd Linux raid autodetect /dev/sdc2 4982528 9176831 4194304 2G fd Linux raid autodetect /dev/sdc3 9437184 1953320351 1943883168 926.9G fd Linux raid autodetectThis sdb seems to be the sda that i format with the 100Gb partition ! (confirmed by mounting it on /mnt)
Now that we have nearly functionning debian, can we try to boot directly on sda ? or automatically on tftp with maybe more seconds to interrupt boot sequence in u-boot ? (becaure my nas is like 3 meters from my computer)
is it possible to implement net console ? serial console is a bit messy... sometimes it doesn't work from time to time
Thanks in advance !
Edited 1 time(s). Last edit at 03/08/2023 04:34AM by BillyIT.
|
Re: Install Debian on Synology DS413J March 08, 2023 04:59AM |
Registered: 1 year ago Posts: 178 |
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Unknown command 'setenv' - try 'help'
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Unknown command 'setenv' - try 'help'
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Unknown command 'setenv' - try 'help'
Marvell>> help
? - alias for 'help'
WOLTest - Wake On Lan u-boot testing
base - print or set address offset
bootm - boot application image from memory
bootp - boot image via network using BootP/TFTP protocol
bubt - Burn an image on the Boot Flash.
cmp - memory compare
cp - memory copy
cpumap - Display CPU memory mapping settings.
crc32 - checksum calculation
echo - echo args to console
erase - erase FLASH memory
flinfo - print FLASH memory information
go - start application at address 'addr'
help - print online help
icrc32 - checksum calculation
iloop - infinite loop on address range
imd - i2c memory display
imm[.b, .s, .w, .l] - i2c memory modify (auto-incrementing)
imw - memory write (fill)
inm - memory modify (constant address)
iprobe - probe to discover valid I2C chip addresses
loop - infinite loop on address range
md - memory display
mm - memory modify (auto-incrementing)
mtest - simple RAM test
mw - memory write (fill)
nm - memory modify (constant address)
pci - list and access PCI Configuration Space
phyRead - Read Phy register
phyWrite - Write Phy register
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
protect - enable or disable FLASH write protection
rarpboot- boot image via network using RARP/TFTP protocol
reset - Perform RESET of the CPU
resetenv - Return all environment variable to default.
setenv - set environment variables
sflash - read, write or erase the external SPI Flash.
sg - scanning the PHYs status
Temp - read chip Tj temp
tftpboot- boot image via network using TFTP protocol
version - print monitor version
Marvell>> reset
▒
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__| ** LOADER **
** MARVELL BOARD: Synology Disk Station LE
U-Boot 1.1.4 (May 22 2012 - 19:52:31) Marvell version: 3.5.9
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 0068B3D4
Soc: 88F6282 A1CPU running @ 1600Mhz L2 running @ 533Mhz
SysClock = 533Mhz , TClock = 200Mhz
DRAM (DDR3) CAS Latency = 7 tRP = 7 tRAS = 20 tRCD=7
DRAM CS[0] base 0x00000000 size 512MB
DRAM Total size 512MB 16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
Using default environment
[8192kB@f8000000] Flash: 8 MB
CPU : Marvell Feroceon (Rev 1)
Streaming disabled
Write allocate disabled
USB 0: host mode
PEX 0: PCI Express Root Complex Interface
PEX interface detected Link X1
PEX 1: interface detected no Link.
Synology Model: DS413j
Fan Status: Not Good
Fan 1: Not Good
Fan 2: Not Good
Net: egiga0 [PRIME], egiga1
Hit any key to stop autoboot: 0
## Booting image at f8090000 ...
Bad Magic Number
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Unknown command 'setenv' - try 'help'
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Unknown command 'setenv' - try 'help'
Marvell>> printenv
bootcmd=bootm F8090000 F8390000
baudrate=115200
loads_echo=0
ipaddr=192.168.1.154
serverip=192.168.1.155
rootpath=/mnt/ARM_FS/
netmask=255.255.254.0
run_diag=yes
stdin=serial
stdout=serial
stderr=serial
console=console=ttyS0,115200 mtdparts=spi_flash:0x80000@0(uboot)ro,0x700000@0x100000(root)
mainlineLinux=no
enaMonExt=no
enaCpuStream=no
enaWrAllo=no
pexMode=RC
disL2Cache=no
setL2CacheWT=yes
disL2Prefetch=yes
enaICPref=yes
enaDCPref=yes
sata_dma_mode=yes
MALLOC_len=1
ethprime=egiga0
netbsd_en=no
vxworks_en=no
bootargs_root=root=/dev/nfs rw
bootargs_end=:::DB88FXX81:eth0:none
image_name=uImage
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;
lcd0_enable=0
lcd0_params=640x480-16@60
bootdelay=3
disaMvPnp=no
ethaddr=00:50:43:3c:3b:5d
ethmtu=1500
mvPhoneConfig=mv_phone_config=dev[0]:fxs,dev[1]:fxo
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
usb0Mode=host
pcieTune=no
pcieTune1=no
bootargs=console=ttyS0,115200 ip=off initrd=0x00800040,8M root=/dev/md0 rw syno_hw_version=DS413jv10 ihd_num=4 netif_num=1 flash_size=8
ethact=egiga0
Environment size: 1174/4092 bytes
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Marvell>> setenv mtdparts 'mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root)'
Unknown command 'setenv' - try 'help'
Mar
Marvell>>
Marvell>> wq
Unknown command 'wq' - try 'help'
Marvell>> <INTERRUPT>
Marvell>> <INTERRUPT>
Marvell>> exit
Unknown command 'exit' - try 'help'
Marvell>> INTERRUPT>
Marvell>> c
c
Unknown command 'c
c' - try 'help'
Marvell>>
Marvell>>
Terminating...
Skipping tty reset...
Thanks for using picocom
root@rasp2:~# picocom --help
picocom v3.1
Compiled-in options:
TTY_Q_SZ is 0
HIGH_BAUD is enabled
USE_FLOCK is enabled
LINENOISE is enabled
HISTFILE is: .picocom_history
USE_CUSTOM_BAUD is enabled
Usage is: picocom [options] <tty port device>
Options are:
--<b>aud <baudrate>
--<f>low x (=soft,xon/xoff) | h (=hard) | n (=none)
--parit<y> o (=odd) | e (=even) | n (=none)
--<d>atabits 5 | 6 | 7 | 8
--sto<p>bits 1 | 2
--<e>scape <char>
--<n>o-escape
--e<c>ho
--no<i>nit
--no<r>eset
--hang<u>p
--no<l>ock
--<s>end-cmd <command>
--recei<v>e-cmd <command>
--imap <map> (input mappings)
--omap <map> (output mappings)
--emap <map> (local-echo mappings)
--lo<g>file <filename>
--inits<t>ring <string>
--e<x>it-after <msec>
--e<X>it
--lower-rts
--raise-rts
--lower-dtr
--raise-dtr
--<q>uiet
--<h>elp
<map> is a comma-separated list of one or more of:
crlf : map CR --> LF
crcrlf : map CR --> CR + LF
igncr : ignore CR
lfcr : map LF --> CR
lfcrlf : map LF --> CR + LF
ignlf : ignore LF
bsdel : map BS --> DEL
delbs : map DEL --> BS
spchex : map special chars (excl. CR, LF & TAB) --> hex
tabhex : map TAB --> hex
crhex : map CR --> hex
lfhex : map LF --> hex
8bithex : map 8-bit chars --> hex
nrmhex : map normal ascii chars --> hex
<?> indicates the equivalent short option.
Short options are prefixed by "-" instead of by "--".
root@rasp2:~# picocom -b 115200 /dev/ttyUSB0 --omap crcrlf --echo
picocom v3.1
port is : /dev/ttyUSB0
flowcontrol : none
baudrate is : 115200
parity is : none
databits are : 8
stopbits are : 1
escape is : C-a
local echo is : yes
noinit is : no
noreset is : no
hangup is : no
nolock is : no
send_cmd is : sz -vv
receive_cmd is : rz -vv -E
imap is :
omap is : crcrlf,
emap is : crcrlf,delbs,
logfile is : none
initstring : none
exit_after is : not set
exit is : no
Type [C-a] [C-h] to see available commands
Terminal ready
Marvell>>
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Marvell>>
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Marvell>>
Marvell>> setenv mtdparts 'mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root)'setenv mtdparts 'mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root)'
Marvell>>
Marvell>> e e v i a d 9 . 6 . 0 2 0 e e v i a d 9 . 6 . 0 2 0
Marvell>>
Marvell>> setenv ipaddr 192.168.10.200setenv ipaddr 192.168.10.200
Marvell>>
Marvell>> setenv serverip 192.168.10.120
setenv serverip 192.168.10.120
Marvell>>
Marvell>> setenv netmask 255.255.255.0
setenv netmask 255.255.255.0
Marvell>>
Marvell>> ping 192.168.10.120
ping 192.168.10.120
Using egiga0 device
host 192.168.10.120 is alive
Marvell>> tftpboot 0x800000 uImage
tftpboot 0x800000 uImage
Using egiga0 device
TFTP from server 192.168.10.120; our IP address is 192.168.10.200
Filename 'uImage'.
Load address: 0x800000
Loading: ############T #####################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##########################
done
Bytes transferred = 5457740 (53474c hex)
Marvell>> tftpboot 0x2100000 uInitrd
tftpboot 0x2100000 uInitrd
Using egiga0 device
TFTP from server 192.168.10.120; our IP address is 192.168.10.200
Filename 'uInitrd'.
Load address: 0x2100000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####
done
Bytes transferred = 9671091 (9391b3 hex)
Marvell>> bootm 0x800000 0x2100000bootm 0x800000 0x2100000
## Booting image at 00800000 ...
Image Name: Linux-5.13.6-kirkwood-tld-1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 5457676 Bytes = 5.2 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 02100000 ...
Image Name: initramfs-5.13.6-kirkwood-tld-1
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 9671027 Bytes = 9.2 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000][ T0] Booting Linux on physical CPU 0x0
[ 0.000000][ T0] Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021
[ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000][ T0] OF: fdt: Machine model: Synology DS413j
[ 0.000000][ T0] printk: bootconsole [earlycon0] enabled
[ 0.000000][ T0] Memory policy: Data cache writeback
[ 0.000000][ T0] Zone ranges:
[ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Movable zone start for each node
[ 0.000000][ T0] Early memory node ranges
[ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
[ 0.000000][ T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000][ T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000][ T0] Memory: 490912K/524288K available (11264K kernel code, 1553K rwdata, 4272K rodata, 1024K init, 309K bss, 33376K reserved, 0K cma-reserved)
[ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x408/0x7b4 with crng_init=0
[ 0.000000][ T0] trace event string verifier disabled
[ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000][ T0] Trampoline variant of Tasks RCU enabled.
[ 0.000000][ T0] Tracing variant of Tasks RCU enabled.
[ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000001][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.008516][ T0] Switching to timer-based delay loop, resolution 5ns
[ 0.015790][ T0] Console: colour dummy device 80x30
[ 0.020985][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[ 0.032196][ T0] pid_max: default: 32768 minimum: 301
[ 0.037798][ T0] LSM: Security Framework initializing
[ 0.043256][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.051277][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.060822][ T0] CPU: Testing write buffer coherency: ok
[ 0.068205][ T1] Setting up static identity map for 0x100000 - 0x100058
[ 0.075359][ T1] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
[ 0.081445][ T1] rcu: Hierarchical SRCU implementation.
[ 0.087955][ T1] devtmpfs: initialized
[ 0.099966][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.110542][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.146067][ T1] prandom32: self test passed (less than 6 bits correlated)
[ 0.153213][ T1] prandom: seed boundary self test passed
[ 0.161935][ T1] prandom: 100 self tests passed
[ 0.166713][ T1] pinctrl core: initialized pinctrl subsystem
[ 0.173880][ T1] NET: Registered protocol family 16
[ 0.179618][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.187895][ T1] audit: initializing netlink subsys (disabled)
[ 0.195078][ T1] thermal_sys: Registered thermal governor 'step_wise'
[ 0.195404][ T16] audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
[ 0.210648][ T1] cpuidle: using governor ladder
[ 0.215489][ T1] cpuidle: using governor menu
[ 0.220528][ T1] Feroceon L2: Enabling L2
[ 0.224806][ T1] Feroceon L2: Cache support initialised.
[ 0.240457][ T1] No ATAGs?
[ 2.568521][ C0] random: fast init done
[ 3.893473][ T39] "cryptomgr_test" (39) uses obsolete ecb(arc4) skcipher
[ 3.919767][ T59] wait_for_initramfs() called before rootfs_initcalls
[ 4.108770][ T1] raid6: int32x8 gen() 150 MB/s
[ 4.278594][ T1] raid6: int32x8 xor() 91 MB/s
[ 4.448567][ T1] raid6: int32x4 gen() 145 MB/s
[ 4.618626][ T1] raid6: int32x4 xor() 95 MB/s
[ 4.788539][ T1] raid6: int32x2 gen() 186 MB/s
[ 4.958629][ T1] raid6: int32x2 xor() 113 MB/s
[ 5.128700][ T1] raid6: int32x1 gen() 130 MB/s
[ 5.298602][ T1] raid6: int32x1 xor() 77 MB/s
[ 5.303544][ T1] raid6: using algorithm int32x2 gen() 186 MB/s
[ 5.309621][ T1] raid6: .... xor() 113 MB/s, rmw enabled
[ 5.315165][ T1] raid6: using intx1 recovery algorithm
[ 5.320767][ T1] vgaarb: loaded
[ 5.324590][ T1] SCSI subsystem initialized
[ 5.329444][ T1] usbcore: registered new interface driver usbfs
[ 5.335641][ T1] usbcore: registered new interface driver hub
[ 5.341697][ T1] usbcore: registered new device driver usb
[ 5.347570][ T1] pps_core: LinuxPPS API ver. 1 registered
[ 5.353223][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 5.363034][ T1] PTP clock support registered
[ 5.369098][ T1] clocksource: Switched to clocksource orion_clocksource
[ 5.459623][ T1] VFS: Disk quotas dquot_6.6.0
[ 5.464298][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.495345][ T1] NET: Registered protocol family 2
[ 5.509263][ T1] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 5.529446][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 5.538485][ T1] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 5.559199][ T1] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 5.567049][ T1] TCP: Hash tables configured (established 4096 bind 4096)
[ 5.589336][ T1] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 5.597273][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.619132][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.626953][ T1] NET: Registered protocol family 1
[ 5.649671][ T1] RPC: Registered named UNIX socket transport module.
[ 5.656264][ T1] RPC: Registered udp transport module.
[ 5.669117][ T1] RPC: Registered tcp transport module.
[ 5.674494][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.699120][ T1] PCI: CLS 0 bytes, default 32
[ 5.703955][ T1] NetWinder Floating Point Emulator V0.97 (double precision)
[ 5.711432][ T58] Trying to unpack rootfs image as initramfs...
[ 7.014826][ T58] Freeing initrd memory: 9448K
[ 7.368561][ T1] Initialise system trusted keyrings
[ 7.373778][ T1] Key type blacklist registered
[ 7.378667][ T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 7.385929][ T1] zbud: loaded
[ 7.390344][ T1] NFS: Registering the id_resolver key type
[ 7.396091][ T1] Key type id_resolver registered
[ 7.401009][ T1] Key type id_legacy registered
[ 7.405720][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 7.413104][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 7.421172][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.428409][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 7.436512][ T1] fuse: init (API version 7.34)
[ 7.441536][ T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 7.448798][ T1] orangefs_init: module version upstream loaded
[ 7.454931][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
[ 7.541245][ T1] xor: measuring software checksum speed
[ 7.553407][ T1] arm4regs : 1485 MB/sec
[ 7.569543][ T1] 8regs : 890 MB/sec
[ 7.582208][ T1] 32regs : 1296 MB/sec
[ 7.587234][ T1] xor: using function: arm4regs (1485 MB/sec)
[ 7.593169][ T1] async_tx: api initialized (async)
[ 7.598205][ T1] Key type asymmetric registered
[ 7.603011][ T1] Asymmetric key parser 'x509' registered
[ 7.608610][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 7.616753][ T1] io scheduler bfq registered
[ 7.770776][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 7.780367][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: host bridge /mbus@f1000000/pcie@82000000 ranges:
[ 7.790242][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000
[ 7.800326][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1044000..0x00f1045fff -> 0x0000044000
[ 7.810406][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1080000..0x00f1081fff -> 0x0000080000
[ 7.820488][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 7.831087][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 7.841680][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 7.852265][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 7.863163][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[ 7.871423][ T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 7.877586][ T1] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff])
[ 7.888427][ T1] pci_bus 0000:00: root bus resource [mem 0xf1044000-0xf1045fff] (bus address [0x00044000-0x00045fff])
[ 7.899270][ T1] pci_bus 0000:00: root bus resource [mem 0xf1080000-0xf1081fff] (bus address [0x00080000-0x00081fff])
[ 7.910110][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 7.917647][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 7.924725][ T1] pci 0000:00:01.0: [11ab:6282] type 01 class 0x060400
[ 7.931436][ T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[ 7.939152][ T1] pci 0000:00:02.0: [11ab:6282] type 01 class 0x060400
[ 7.945841][ T1] pci 0000:00:02.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[ 7.954938][ T1] PCI: bus0: Fast back to back transfers disabled
[ 7.961213][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.969910][ T1] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.978746][ T1] pci 0000:01:00.0: [11ab:7042] type 00 class 0x010000
[ 7.985459][ T1] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x900fffff 64bit]
[ 7.992934][ T1] pci 0000:01:00.0: reg 0x18: [io 0xf0000000-0xf00000ff]
[ 8.000000][ T1] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 8.000 Gb/s with 2.5 GT/s PCIe x4 link)
[ 8.015673][ T1] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 8.027994][ T1] PCI: bus1: Fast back to back transfers disabled
[ 8.034270][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 8.043312][ T1] PCI: bus2: Fast back to back transfers enabled
[ 8.049501][ T1] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 8.056930][ T1] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff]
[ 8.064496][ T1] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff]
[ 8.071536][ T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pref]
[ 8.079442][ T1] pci 0000:00:02.0: BAR 6: assigned [mem 0xe0200000-0xe02007ff pref]
[ 8.087335][ T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit]
[ 8.095328][ T1] pci 0000:01:00.0: BAR 2: assigned [io 0x10000-0x100ff]
[ 8.102286][ T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 8.107926][ T1] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff]
[ 8.114873][ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 8.122348][ T1] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 8.128076][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0143)
[ 8.135405][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
[ 8.199949][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 8.209979][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
[ 8.269946][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 8.280231][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 8.288421][ T1] printk: console [ttyS0] disabled
[ 8.293507][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A
[ 8.303209][ T1] printk: console [ttyS0] enabled
[ 8.303209][ T1] printk: console [ttyS0] enabled
[ 8.313034][ T1] printk: bootconsole [earlycon0] disabled
[ 8.313034][ T1] printk: bootconsole [earlycon0] disabled
[ 8.325064][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 12500000) is a 16550A
[ 8.341770][ T1] loop: module loaded
[ 8.346128][ T1] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
[ 8.360342][ T1] scsi host0: sata_mv
[ 8.364727][ T1] scsi host1: sata_mv
[ 8.369058][ T1] scsi host2: sata_mv
[ 8.373431][ T1] scsi host3: sata_mv
[ 8.377484][ T1] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 37
[ 8.385928][ T1] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 37
[ 8.394340][ T1] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 37
[ 8.402752][ T1] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 37
[ 8.412488][ T1] sata_mv f1080000.sata: slots 32 ports 2
[ 8.421371][ T1] scsi host4: sata_mv
[ 8.425747][ T1] scsi host5: sata_mv
[ 8.429854][ T1] ata5: SATA max UDMA/133 irq 34
[ 8.434671][ T1] ata6: SATA max UDMA/133 irq 34
[ 8.441094][ T1] spi-nor spi0.0: found n25q064, expected m25p80
[ 8.447588][ T1] spi-nor spi0.0: n25q064 (8192 Kbytes)
[ 8.453087][ T1] 6 fixed-partitions partitions found on MTD device spi0.0
[ 8.460193][ T1] Creating 6 MTD partitions on "spi0.0":
[ 8.465720][ T1] 0x000000000000-0x000000080000 : "RedBoot"
[ 8.472786][ T1] 0x000000080000-0x000000280000 : "zImage"
[ 8.479667][ T1] 0x000000280000-0x0000003c0000 : "rd.gz"
[ 8.486423][ T1] 0x0000003c0000-0x0000003d0000 : "vendor"
[ 8.493286][ T1] 0x0000003d0000-0x0000003f0000 : "RedBoot config"
[ 8.500871][ T1] 0x0000003f0000-0x000000400000 : "FIS directory"
[ 8.508700][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 8.517309][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 8.528576][ T1] libphy: Fixed MDIO Bus: probed
[ 8.534661][ T1] libphy: orion_mdio_bus: probed
[ 8.539673][ T1] mdio_bus f1072004.mdio-bus-mii: MDIO device at address 8 is missing.
[ 8.560883][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 8.570360][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:3c:3b:5d
[ 8.580048][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.587329][ T1] ehci-pci: EHCI PCI platform driver
[ 8.592598][ T1] ehci-orion: EHCI orion driver
[ 8.597480][ T1] orion-ehci f1050000.ehci: EHCI Host Controller
[ 8.603784][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 8.612353][ T1] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000
[ 8.639119][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 8.646119][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[ 8.655168][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.663172][ T1] usb usb1: Product: EHCI Host Controller
[ 8.668807][ T1] usb usb1: Manufacturer: Linux 5.13.6-kirkwood-tld-1 ehci_hcd
[ 8.676279][ T1] usb usb1: SerialNumber: f1050000.ehci
[ 8.682307][ T1] hub 1-0:1.0: USB hub found
[ 8.686855][ T1] hub 1-0:1.0: 1 port detected
[ 8.692228][ T1] usbcore: registered new interface driver usb-storage
[ 8.699379][ T1] mousedev: PS/2 mouse device common for all mice
[ 8.705949][ T1] i2c /dev entries driver
[ 8.711775][ T1] rtc-s35390a 0-0030: error resetting chip
[ 8.718019][ T1] rtc-s35390a: probe of 0-0030 failed with error -5
[ 8.725262][ T1] device-mapper: uevent: version 1.0.3
[ 8.730919][ T1] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 8.740183][ T94] ata1: SATA link down (SStatus 0 SControl 300)
[ 8.746711][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 8.754037][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 8.761958][ T1] device-mapper: multipath service-time: version 0.3.0 loaded
[ 8.769357][ T104] ata5: SATA link down (SStatus 0 SControl F300)
[ 8.775659][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[ 8.782518][ T1] device-mapper: raid: Loading target version 1.15.1
[ 8.791208][ T1] hid: raw HID events driver (C) Jiri Kosina
[ 8.797392][ T1] drop_monitor: Initializing network drop monitor service
[ 8.804793][ T1] NET: Registered protocol family 10
[ 8.811083][ T1] Segment Routing with IPv6
[ 8.815473][ T1] RPL Segment Routing with IPv6
[ 8.820340][ T1] NET: Registered protocol family 17
[ 8.825698][ T1] Key type dns_resolver registered
[ 8.831301][ T1] registered taskstats version 1
[ 8.836125][ T1] Loading compiled-in X.509 certificates
[ 8.842009][ T1] zswap: loaded using pool lzo/zbud
[ 8.847369][ T1] Key type ._fscrypt registered
[ 8.852164][ T1] Key type .fscrypt registered
[ 8.856806][ T1] Key type fscrypt-provisioning registered
[ 8.864054][ T1] Key type big_key registered
[ 8.892246][ T1] Key type encrypted registered
[ 8.979126][ T117] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 9.100652][ T96] ata2: SATA link down (SStatus 0 SControl 300)
[ 9.180861][ T117] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.32
[ 9.189811][ T117] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 9.197695][ T117] usb 1-1: Product: USB2.0 Hub
[ 9.203157][ T117] hub 1-1:1.0: USB hub found
[ 9.207988][ T117] hub 1-1:1.0: 4 ports detected
[ 14.649130][ T98] ata3: link is slow to respond, please be patient (ready=0)
[ 19.129180][ T98] ata3: SRST failed (errno=-16)
[ 21.729144][ T98] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 21.740818][ T98] ata3.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
[ 21.747730][ T98] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 21.764490][ T98] ata3.00: configured for UDMA/133
[ 21.779946][ T80] scsi 2:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[ 21.789819][ T58] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 21.798222][ T58] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 21.805100][ T58] sd 2:0:0:0: [sda] Write Protect is off
[ 21.810800][ T58] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.839397][ T58] sda: sda1 sda2 sda3
[ 21.844889][ T58] sd 2:0:0:0: [sda] Attached SCSI disk
[ 22.140662][ T100] ata4: SATA link down (SStatus 0 SControl 300)
[ 22.480618][ T106] ata6: SATA link down (SStatus 0 SControl F300)
[ 22.499930][ T1] Freeing unused kernel memory: 1024K
[ 22.505891][ T1] Checked W+X mappings: passed, no W+X pages found
[ 22.512306][ T1] Run /init as init process
Loading, please wait...
Starting version 247.3-6
[ 29.859146][ T94] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 29.870889][ T94] ata1.00: ATA-8: TOSHIBA DT01ACA100, MS2OA750, max UDMA/133
[ 29.878204][ T94] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 29.892778][ T94] ata1.00: configured for UDMA/133
[ 29.898208][ T117] scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA1 A750 PQ: 0 ANSI: 5
[ 29.911196][ T108] sd 0:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 29.924288][ T108] sd 0:0:0:0: [sdb] 4096-byte physical blocks
[ 29.930460][ T108] sd 0:0:0:0: [sdb] Write Protect is off
[ 29.936155][ T108] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 29.972153][ T108] sdb: sdb1 sdb2
[ 29.981533][ T108] sd 0:0:0:0: [sdb] Attached SCSI disk
[ 32.226296][ C0] random: crng init done
[ 33.609570][ T157] reg-fixed-voltage regulators-hdd-30-4:regulator@3: nonexclusive access to GPIO for regulators-hdd-30-4:regulator@3
[ 33.950640][ T98] ata3: SATA link down (SStatus 0 SControl 300)
[ 38.650655][ T157] reg-fixed-voltage regulators-hdd-30-4:regulator@4: nonexclusive access to GPIO for regulators-hdd-30-4:regulator@4
[ 38.969611][ T96] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 38.981364][ T96] ata2.00: supports DRM functions and may not be fully accessible
[ 38.989137][ T96] ata2.00: ATA-9: ST1000DM003-1ER162, CC43, max UDMA/133
[ 38.996095][ T96] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 39.014354][ T96] ata2.00: supports DRM functions and may not be fully accessible
[ 39.023600][ T96] ata2.00: configured for UDMA/133
[ 39.029022][ T117] scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC43 PQ: 0 ANSI: 5
[ 39.042091][ T108] sd 1:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 39.055260][ T108] sd 1:0:0:0: [sdc] 4096-byte physical blocks
[ 39.061433][ T108] sd 1:0:0:0: [sdc] Write Protect is off
[ 39.067130][ T108] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 39.096714][ T108] sdc: sdc1 sdc2 sdc3
[ 39.107524][ T108] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 39.300845][ T98] ata3: SATA link down (SStatus 0 SControl 300)
Begin: Loading essential drivers ... done.
[ 44.660656][ T98] ata3: SATA link down (SStatus 0 SControl 300)
[ 44.666817][ T98] ata3.00: disabled
[ 44.670550][ T117] ata3.00: detaching (SCSI 2:0:0:0)
[ 44.683429][ T117] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 44.696731][ T117] sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 44.715060][ T117] sd 2:0:0:0: [sda] Stopping disk
[ 44.720248][ T117] sd 2:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.36.1
[/sbin/fsck.ext3 (1) -- /dev/sdb1] fsck.ext3 -a -C0 /dev/sdb1
rootfs: clean, 17702/1900544 files, 564031/7591244 blocks
done.
[ 54.242761][ T179] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem
[ 54.537397][ T179] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 55.857067][ T1] systemd[1]: System time before build time, advancing clock.
[ 56.010473][ T1] systemd[1]: Inserted module 'autofs4'
[ 56.154841][ T1] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 56.179555][ T1] systemd[1]: Detected architecture arm.
Welcome to Debian GNU/Linux 11 (bullseye)!
[ 56.256485][ T1] systemd[1]: Set hostname to <debian>.
[ 57.927827][ T1] systemd[1]: Queued start job for default target Graphical Interface.
[ 57.938424][ T1] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 57.951659][ T1] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 57.962520][ T1] systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 58.000270][ T1] systemd[1]: Created slice system-modprobe.slice.
[ OK ] Created slice system-modprobe.slice.
[ 58.040218][ T1] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 58.080020][ T1] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 58.119762][ T1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ 58.159677][ T1] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 58.200284][ T1] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary…s File System Automount Point.
[ 58.239580][ T1] systemd[1]: Reached target Local Encrypted Volumes.
[ OK ] Reached target Local Encrypted Volumes.
[ 58.279750][ T1] systemd[1]: Reached target Paths.
[ OK ] Reached target Paths.
[ 58.319565][ T1] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 58.350946][ T1] systemd[1]: Listening on RPCbind Server Activation Socket.
[ OK ] Listening on RPCbind Server Activation Socket.
[ 58.390015][ T1] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 58.429738][ T1] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 58.470422][ T1] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 58.510052][ T1] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 58.550172][ T1] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 58.590216][ T1] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 58.629921][ T1] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 58.670132][ T1] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 58.682729][ T1] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 58.722476][ T1] systemd[1]: Mounting NFSD configuration filesystem...
Mounting NFSD configuration filesystem...
[ 58.772579][ T1] systemd[1]: Mounting RPC Pipe File System...
Mounting RPC Pipe File System...
[ 58.792865][ T1] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 58.842946][ T1] systemd[1]: Mounting Kernel Trace File System...
Mounting Kernel Trace File System...
[ 58.890787][ T1] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 58.906061][ T1] systemd[1]: Starting Create list of static device nodes for the current kernel...
Starting Create list of st…odes for the current kernel...
[ 58.963361][ T1] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 59.013200][ T1] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 59.063447][ T1] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 59.464389][ T1] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 59.474651][ T1] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 59.488843][ T1] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 59.690995][ T1] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 59.710330][ T1] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 59.740193][ T1] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 59.784138][ T1] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 59.840097][ T1] systemd[1]: Mounted NFSD configuration filesystem.
[ OK ] Mounted NFSD configuration filesystem.
[ 59.900335][ T1] systemd[1]: Mounted RPC Pipe File System.
[ OK ] Mounted RPC Pipe File System.
[ 59.950105][ T1] systemd[1]: Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Debug File System.
[ 59.968840][ T1] systemd[1]: Mounted Kernel Trace File System.
[ OK ] Mounted Kernel Trace File System.
[ 60.020904][ T1] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ OK ] Finished Create list of st… nodes for the current kernel.
[ 60.061227][ T1] systemd[1]: modprobe@configfs.service: Succeeded.
[ 60.068720][ T1] systemd[1]: Finished Load Kernel Module configfs.
[ 60.075519][ T220] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[ OK ] Finished Load Kernel Module configfs.
[ 60.127027][ T1] systemd[1]: modprobe@drm.service: Succeeded.
[ 60.160689][ T1] systemd[1]: Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module drm.
[ 60.191406][ T1] systemd[1]: modprobe@fuse.service: Succeeded.
[ 60.209401][ T1] systemd[1]: Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Module fuse.
[ 60.231248][ T1] systemd[1]: Finished Load Kernel Modules.
[ OK ] Finished Load Kernel Modules.
[ 60.261213][ T1] systemd[1]: Finished Remount Root and Kernel File Systems.
[ OK ] Finished Remount Root and Kernel File Systems.
[ 60.293756][ T1] systemd[1]: Activating swap /swapfile1...
Activating swap /swapfile1...
[ 60.353048][ T1] systemd[1]: Mounting FUSE Control File System...
Mounting FUSE Control File System...
[ 60.410187][ T1] systemd[1]: Mounting Kernel Configuration File System...
Mounting Kernel Configuration File System...
[ 60.465247][ T1] systemd[1]: Starting pNFS block layout mapping daemon...
Starting pNFS block layout mapping daemon...
[ 60.546769][ T1] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 60.558762][ T1] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 60.587737][ T1] systemd[1]: Starting Load/Save Random Seed...
Starting Load/Save Random Seed...
[ 60.632899][ T1] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ 60.693081][ T1] systemd[1]: Starting Create System Users...
[ 60.709198][ T221] Adding 524284k swap on /swapfile1. Priority:-2 extents:22 across:27921988k FS
Starting Create System Users...
[ 60.764928][ T1] systemd[1]: Activated swap /swapfile1.
[ OK ] Activated swap /swapfile1.
[ 60.831509][ T1] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Started pNFS block layout mapping daemon.
[ OK ] Finished Load/Save Random Seed.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Create System Users.
[ OK ] Reached target Swap.
Starting Flush Journal to Persistent Storage...
Starting Create Static Device Nodes in /dev...
[ 61.304903][ T216] systemd-journald[216]: Received client request to flush runtime journal.
[ OK ] Finished Coldplug All udev Devices.
[ 61.379199][ T216] systemd-journald[216]: File /var/log/journal/c4334d5b2fba8bce5294b56551baee86/system.journal corrupted or uncleanly shut down, renaming and replacing.
Starting Helper to synchronize boot up for ifupdown...
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Local File Systems (Pre).
Mounting /tmp...
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Mounted /tmp.
[ OK ] Reached target Local File Systems.
Starting Preprocess NFS configuration...
[ OK ] Finished Preprocess NFS configuration.
Starting NFSv4 ID-name mapping service...
[ OK ] Reached target NFS client services.
[ OK ] Started NFSv4 ID-name mapping service.
[ OK ] Started Rule-based Manager for Device Events and Files.
[ OK ] Finished Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ 62.599175][ T243] gpio-fan gpio-fan-100-15-35-1: GPIO fan initialized
[ OK ] Finished Create Volatile Files and Directories.
Starting RPC bind portmap service...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Finished Update UTMP about System Boot/Shutdown.
[ OK 63.201324][ T247] sd 0:0:0:0: Attached scsi generic sg0 type 0
0m] Started RPC bind portmap service.
[ OK 63.342612][ T247] sd 1:0:0:0: Attached scsi generic sg1 type 0
0m] Found device /dev/ttyS0.
[ OK ] Reached target RPC Port Mapper.
[ OK ] Reached target System Initialization.
[ 63.448758][ T251] orion_wdt: Initial timeout 21 sec
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[ OK ] Started Daily man-db regeneration.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Avahi mDNS/DNS-SD Stack...
[ OK ] Started D-Bus System Message Bus.
Starting Remove Stale Onli…t4 Metadata Check Snapshots...
Starting User Login Management...
[ 64.198963][ T245] marvell-cesa f1030000.crypto: CESA device successfully registered
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[ OK ] Started User Login Management.
[ OK ] Found device /sys/subsystem/net/devices/eth0.
[ OK ] Finished Helper to synchronize boot up for ifupdown.
[ OK ] Started ifup for eth0.
Starting Raise network interfaces...
[*** ] A start job is running for Raise network interfaces (10s / 5min 7s)
[ 69.145038][ C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[ OK ] Finished Raise network interfaces.
[ OK ] Reached target Network.
Starting NFS Mount Daemon...
Starting Network Time Service...
Starting /etc/rc.local Compatibility...
Starting OpenBSD Secure Shell server...
[ OK ] Started NFS Mount Daemon.
Starting NFS server and services...
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Started Network Time Service.
[ OK ] Started OpenBSD Secure Shell server.
[ 74.830155][ T394] NFSD: Using UMH upcall client tracking operations.
[ 74.836795][ T394] NFSD: starting 90-second grace period (net f000001c)
[ OK ] Finished NFS server and services.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
Starting LSB: Starts syslogd...
Starting Permit User Sessions...
[ OK ] Finished Permit User Sessions.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Started LSB: Starts syslogd.
Starting LSB: Starts klogd...
[ OK ] Started LSB: Starts klogd.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Finished Update UTMP about System Runlevel Changes.
Debian GNU/Linux 11 debian ttyS0
debian login: rroooott
Password: root
Linux debian 5.13.6-kirkwood-tld-1 #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021 armv5tel
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Aug 7 15:25:50 CEST 2022 on ttyS0
debian
192.168.10.200
Synology DS413j
Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021
Debian 11.6
Sun Aug 7 15:26:19 CEST 2022 up 2 minutes
root@debian:~#
|
Re: Install Debian on Synology DS413J March 08, 2023 05:04AM |
Registered: 1 year ago Posts: 178 |
root@debian:~# fw_printenv Cannot read environment, using default Cannot read default environment from file
root@debian:~# cat /proc/mtd dev: size erasesize name mtd0: 00080000 00001000 "RedBoot" mtd1: 00200000 00001000 "zImage" mtd2: 00140000 00001000 "rd.gz" mtd3: 00010000 00001000 "vendor" mtd4: 00020000 00001000 "RedBoot config" mtd5: 00010000 00001000 "FIS directory"
root@debian:~# cat /proc/cmdline console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
|
Re: Install Debian on Synology DS413J March 08, 2023 09:38AM |
Registered: 1 year ago Posts: 178 |
i tried picocom, it's better for the break of line but i can't copy/paste my command when i do i have this :
i tried to launch picocom like that :
Marvell>> setenv mtdparts 'mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root)' Unknown command 'setenv' - try 'help'
i tried to launch picocom like that :
root@rasp2:~# picocom -b 115200 /dev/ttyUSB0 --omap crcrlf
|
Re: Install Debian on Synology DS413J March 08, 2023 02:11PM |
Admin Registered: 13 years ago Posts: 19,102 |
> root@debian:~# fw_printenv
> Cannot read environment, using default
> Cannot read default environment from file
Don't worry about fw_printenv, it will not work. The bad news is the envs cannot be saved, because it is not on flash. This is a limitation that you will need to boot with tfttp until until I have time to see if I can cretate new u-boot or patching the stock u-boot.
Hopefully, I can come up with a way for you to boot with only 1 command. This stock u-boot is really really bad.
Try setting the bootargs with mtdpart coded in:
Boot wih this change and hopefully we can see the MDT partitions in Debian.
======
So now for HDD rootfs, go ahead, pick any SATA slot and put in the disk that you had partition with the first one is 100GB.
By the way, use these commands to make the format look nicer than fdisk -l
Boot with USB rootfs, and follow the instruction to create rootfs Debian-5.13.6-kirkwood-tld-1-rootfs-bodhi.tar.bz2 on that 100GB partition. The instruction is written for all types of storage device, so USB, SATA, MMC, all created the same way (except for MMC the device name is a bit different).
After the HDD rootfs is created, shutdown the box and remove the USB drive. And power up, boot with the same envs that you use for booting USB.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/08/2023 02:17PM by bodhi.
> Cannot read environment, using default
> Cannot read default environment from file
Don't worry about fw_printenv, it will not work. The bad news is the envs cannot be saved, because it is not on flash. This is a limitation that you will need to boot with tfttp until until I have time to see if I can cretate new u-boot or patching the stock u-boot.
Hopefully, I can come up with a way for you to boot with only 1 command. This stock u-boot is really really bad.
Try setting the bootargs with mtdpart coded in:
setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root) earlyprintk=serialif you have trouble with the above format, do
setenv bootargs "console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root) earlyprintk=serial"and then print it back out to confirm
printenv bootargs
Boot wih this change and hopefully we can see the MDT partitions in Debian.
======
So now for HDD rootfs, go ahead, pick any SATA slot and put in the disk that you had partition with the first one is 100GB.
By the way, use these commands to make the format look nicer than fdisk -l
lsblk df -h mount | grep sd
Boot with USB rootfs, and follow the instruction to create rootfs Debian-5.13.6-kirkwood-tld-1-rootfs-bodhi.tar.bz2 on that 100GB partition. The instruction is written for all types of storage device, so USB, SATA, MMC, all created the same way (except for MMC the device name is a bit different).
After the HDD rootfs is created, shutdown the box and remove the USB drive. And power up, boot with the same envs that you use for booting USB.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/08/2023 02:17PM by bodhi.
|
Re: Install Debian on Synology DS413J March 08, 2023 02:32PM |
Registered: 1 year ago Posts: 178 |
|
Re: Install Debian on Synology DS413J March 09, 2023 04:05PM |
Registered: 1 year ago Posts: 178 |
> ======
>
> So now for HDD rootfs, go ahead, pick any SATA
> slot and put in the disk that you had partition
> with the first one is 100GB.
>
> By the way, use these commands to make the format
> look nicer than fdisk -l
>
>
> Boot with USB rootfs, and follow the instruction
> to create rootfs
> Debian-5.13.6-kirkwood-tld-1-rootfs-bodhi.tar.bz2
> on that 100GB partition. The instruction is
> written for all types of storage device, so USB,
> SATA, MMC, all created the same way (except for
> MMC the device name is a bit different).
>
> After the HDD rootfs is created, shutdown the box
> and remove the USB drive. And power up, boot with
> the same envs that you use for booting USB.
I'm already booting from hdd. No usb anymore.
I'll try new commands. No way to save it so it will boot either if with the help of tftpboot ?
>
> So now for HDD rootfs, go ahead, pick any SATA
> slot and put in the disk that you had partition
> with the first one is 100GB.
>
> By the way, use these commands to make the format
> look nicer than fdisk -l
>
>
> lsblk > df -h > mount | grep sd >>
> Boot with USB rootfs, and follow the instruction
> to create rootfs
> Debian-5.13.6-kirkwood-tld-1-rootfs-bodhi.tar.bz2
> on that 100GB partition. The instruction is
> written for all types of storage device, so USB,
> SATA, MMC, all created the same way (except for
> MMC the device name is a bit different).
>
> After the HDD rootfs is created, shutdown the box
> and remove the USB drive. And power up, boot with
> the same envs that you use for booting USB.
I'm already booting from hdd. No usb anymore.
I'll try new commands. No way to save it so it will boot either if with the help of tftpboot ?
|
Re: Install Debian on Synology DS413J March 09, 2023 04:47PM |
Admin Registered: 13 years ago Posts: 19,102 |
> I'm already booting from hdd. No usb anymore.
Cool!
Is there anyway you can make it unique in the log the HDD that you said lost when you use 3 or 4 HDDs? Basically, perhaps use a different 2.5 HDD/SSD so we know which SATA port has that problem. Sounds like there might be 2 ports that are not working (the ones using PCIe bus). I'm pretty sure those are 2 SATA ports that are SoC internal work fine.
> I'll try new commands. No way to save it so it
> will boot either if with the help of tftpboot ?
Unfortunately, Synology intentionally crippled this u-boot. I was hoping to see the source command, but even this simple command was taken out :D mad.
So what you can do temporarily is stringing commands together in a notepad and copy/paste the whole string at u-boot prompt.
Here we have 3 commands:
If the above works then string them further. With stock u-boot this bad, there is probably a limitation of the length of each command.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Cool!
Is there anyway you can make it unique in the log the HDD that you said lost when you use 3 or 4 HDDs? Basically, perhaps use a different 2.5 HDD/SSD so we know which SATA port has that problem. Sounds like there might be 2 ports that are not working (the ones using PCIe bus). I'm pretty sure those are 2 SATA ports that are SoC internal work fine.
> I'll try new commands. No way to save it so it
> will boot either if with the help of tftpboot ?
Unfortunately, Synology intentionally crippled this u-boot. I was hoping to see the source command, but even this simple command was taken out :D mad.
Marvell>> help ? - alias for 'help' WOLTest - Wake On Lan u-boot testing base - print or set address offset bootm - boot application image from memory bootp - boot image via network using BootP/TFTP protocol bubt - Burn an image on the Boot Flash. cmp - memory compare cp - memory copy cpumap - Display CPU memory mapping settings. crc32 - checksum calculation echo - echo args to console erase - erase FLASH memory flinfo - print FLASH memory information go - start application at address 'addr' help - print online help icrc32 - checksum calculation iloop - infinite loop on address range imd - i2c memory display imm[.b, .s, .w, .l] - i2c memory modify (auto-incrementing) imw - memory write (fill) inm - memory modify (constant address) iprobe - probe to discover valid I2C chip addresses loop - infinite loop on address range md - memory display mm - memory modify (auto-incrementing) mtest - simple RAM test mw - memory write (fill) nm - memory modify (constant address) pci - list and access PCI Configuration Space phyRead - Read Phy register phyWrite - Write Phy register ping - send ICMP ECHO_REQUEST to network host printenv- print environment variables protect - enable or disable FLASH write protection rarpboot- boot image via network using RARP/TFTP protocol reset - Perform RESET of the CPU resetenv - Return all environment variable to default. setenv - set environment variables sflash - read, write or erase the external SPI Flash. sg - scanning the PHYs status Temp - read chip Tj temp tftpboot- boot image via network using TFTP protocol version - print monitor version
So what you can do temporarily is stringing commands together in a notepad and copy/paste the whole string at u-boot prompt.
Here we have 3 commands:
setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root) earlyprintk=serial; setenv ipaddr 192.168.10.200; setenv serverip 192.168.10.120; setenv serverip 192.168.10.120 tftpboot 0x800000 uImage; tftpboot 0x2100000 uInitrd; bootm 0x800000 0x2100000Note: you might need to set the router IP addr
setenv gatewayip 192.168.10.1
If the above works then string them further. With stock u-boot this bad, there is probably a limitation of the length of each command.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Install Debian on Synology DS413J March 09, 2023 05:02PM |
Admin Registered: 13 years ago Posts: 19,102 |
Another important topic: kwboot. See if you can run kwboot and boot this u-boot for the Zyxel NSA325.
See my u-boot release thread:
https://forum.doozan.com/read.php?3,12381
Download this tarball
And use this uboot.2017.07-tld-1.nsa325.mtd0.kwb to run do UART booting as desecribed here:
https://forum.doozan.com/read.php?3,51739,51919#msg-51919
The kwboot binary on rPi should work fine for this box. You can also download the new and improved kwboot here:
https://forum.doozan.com/read.php?3,27280
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
See my u-boot release thread:
https://forum.doozan.com/read.php?3,12381
Download this tarball
Quote
uboot.2017.07-tld-1.nsa325.bodhi.tar
And use this uboot.2017.07-tld-1.nsa325.mtd0.kwb to run do UART booting as desecribed here:
https://forum.doozan.com/read.php?3,51739,51919#msg-51919
The kwboot binary on rPi should work fine for this box. You can also download the new and improved kwboot here:
https://forum.doozan.com/read.php?3,27280
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Install Debian on Synology DS413J March 10, 2023 07:09AM |
Registered: 1 year ago Posts: 178 |
> Try setting the bootargs with mtdpart coded in:
>
>
>
I tried the first code and i have this error :
I don't know if i'm right to close the parenthesis... is it a mistake of you or me ?
i tried after the three lines of commands (btw no way to copy/paste anymore either in minicom or picocom ?! trying my best to not make mistake or typos). it's a pity without copy and paste working correctly !
>
>
> setenv bootargs console=ttyS0,115200 > root=LABEL=rootfs rootdelay=10 > mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root) > earlyprintk=serial >> if you have trouble with the above format, do
>
> setenv bootargs "console=ttyS0,115200 > root=LABEL=rootfs rootdelay=10 > mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root) > earlyprintk=serial" >
I tried the first code and i have this error :
** MARVELL BOARD: Synology Disk Station LE
U-Boot 1.1.4 (May 22 2012 - 19:52:31) Marvell version: 3.5.9
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 0068B3D4
Soc: 88F6282 A1CPU running @ 1600Mhz L2 running @ 533Mhz
SysClock = 533Mhz , TClock = 200Mhz
DRAM (DDR3) CAS Latency = 7 tRP = 7 tRAS = 20 tRCD=7
DRAM CS[0] base 0x00000000 size 512MB
DRAM Total size 512MB 16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
Using default environment
[8192kB@f8000000] Flash: 8 MB
CPU : Marvell Feroceon (Rev 1)
Streaming disabled
Write allocate disabled
USB 0: host mode
PEX 0: PCI Express Root Complex Interface
PEX interface detected Link X1
PEX 1: interface detected no Link.
Synology Model: DS413j
Fan Status: Not Good
Fan 1: Not Good
Fan 2: Not Good
Net: egiga0 [PRIME], egiga1
Hit any key to stop autoboot: 0
## Booting image at f8090000 ...
Bad Magic Number
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Unknown command 'setenv' - try 'help'
Marvell>>
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Unknown command 'setenv' - try 'help'
Marvell>>
Marvell>>
Terminating...
Skipping tty reset...
Thanks for using picocom
root@rasp2:~# picocom -b 115200 /dev/ttyUSB0 --omap crcrlf
picocom v3.1
port is : /dev/ttyUSB0
flowcontrol : none
baudrate is : 115200
parity is : none
databits are : 8
stopbits are : 1
escape is : C-a
local echo is : no
noinit is : no
noreset is : no
hangup is : no
nolock is : no
send_cmd is : sz -vv
receive_cmd is : rz -vv -E
imap is :
omap is : crcrlf,
emap is : crcrlf,delbs,
logfile is : none
initstring : none
exit_after is : not set
exit is : no
Type [C-a] [C-h] to see available commands
Terminal ready
Marvell>>
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Unknown command 'setenv' - try 'help'
Marvell>>
Marvell>>
Marvell>>
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Unknown command 'setenv' - try 'help'
Marvell>>
Marve
Unknown command 'ry 'help'
Marvell>>
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Unknown command 'setenv' - try 'help'
Marvell>>
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Unknown command 'setenv' - try 'help'
Marvell>>
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Unknown command 'setenv' - try 'help'
Marvell>>
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprint=serial
Marvell>>
Marvell>> setenv mtdparts 'mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root)'
Unknown command 'setenv' - try 'help'
Marvell>>
Marv
Marvell>>
Marvell>>
Marvell>>
Marvell>>
Marvell>>
Marvell>> setenv mtdparts 'mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root)'
Unknown command 'setenv' - try 'help'
Marvell>>
Marvell>> q
Unknown command 'q' - try 'help'
Marvell>>
Marvell>>
Terminating...
Skipping tty reset...
Thanks for using picocom
root@rasp2:~# picocom -b 115200 /dev/ttyUSB0 --omap crcrlf
picocom v3.1
port is : /dev/ttyUSB0
flowcontrol : none
baudrate is : 115200
parity is : none
databits are : 8
stopbits are : 1
escape is : C-a
local echo is : no
noinit is : no
noreset is : no
hangup is : no
nolock is : no
send_cmd is : sz -vv
receive_cmd is : rz -vv -E
imap is :
omap is : crcrlf,
emap is : crcrlf,delbs,
logfile is : none
initstring : none
exit_after is : not set
exit is : no
Type [C-a] [C-h] to see available commands
Terminal ready
Unknown command '' - try 'help'
Marvell>>
Marvell>>
*** Picocom commands (all prefixed by [C-a])
*** [C-x] : Exit picocom
*** [C-q] : Exit without reseting serial port
*** [C-b] : Set baudrate
*** [C-u] : Increase baudrate (baud-up)
*** [C-d] : Decrease baudrate (baud-down)
*** [C-i] : Change number of databits
*** [C-j] : Change number of stopbits
*** [C-f] : Change flow-control mode
*** [C-y] : Change parity mode
*** [C-p] : Pulse DTR
*** [C-t] : Toggle DTR
*** [C-g] : Toggle RTS
*** [C-|] : Send break
*** [C-c] : Toggle local echo
*** [C-w] : Write hex
*** [C-s] : Send file
*** [C-r] : Receive file
*** [C-v] : Show port settings
*** [C-h] : Show this message
Marvell>>
Marvell>>
Unknown command '' - try 'help'
Marvell>>
Marvell>> setenv mtdparts 'mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root)'
Unknown command 'setenv' - try 'help'
Marvell>>
Marvell>>
Marvell>>
Marvell>>
Unknown command '' - try 'help'
Marvell>>
Marvell>>
Marvell>>
Marvell>>
Marvell>>
Marvell>>
Marvell>>
Ma
Unknown command 'ry 'help'
Marvell>>
Marvell>> ▒
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__| ** LOADER **
** MARVELL BOARD: Synology Disk Station LE
U-Boot 1.1.4 (May 22 2012 - 19:52:31) Marvell version: 3.5.9
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 0068B3D4
Soc: 88F6282 A1CPU running @ 1600Mhz L2 running @ 533Mhz
SysClock = 533Mhz , TClock = 200Mhz
DRAM (DDR3) CAS Latency = 7 tRP = 7 tRAS = 20 tRCD=7
DRAM CS[0] base 0x00000000 size 512MB
DRAM Total size 512MB 16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
Using default environment
[8192kB@f8000000] Flash: 8 MB
CPU : Marvell Feroceon (Rev 1)
Streaming disabled
Write allocate disabled
USB 0: host mode
PEX 0: PCI Express Root Complex Interface
PEX interface detected Link X1
PEX 1: interface detected no Link.
Synology Model: DS413j
Fan Status: Not Good
Fan 1: Not Good
Fan 2: Not Good
Net: egiga0 [PRIME], egiga1
Hit any key to stop autoboot: 0
## Booting image at f8090000 ...
Bad Magic Number
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root) earlyprintk=serial
Unknown command 'setenv' - try 'help'
Marvell>>
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root)) earlyprintk=serial
Marvell>>
Marvell>> printenv
bootcmd=bootm F8090000 F8390000
baudrate=115200
loads_echo=0
ipaddr=192.168.1.154
serverip=192.168.1.155
rootpath=/mnt/ARM_FS/
netmask=255.255.254.0
run_diag=yes
stdin=serial
stdout=serial
stderr=serial
console=console=ttyS0,115200 mtdparts=spi_flash:0x80000@0(uboot)ro,0x700000@0x100000(root)
mainlineLinux=no
enaMonExt=no
enaCpuStream=no
enaWrAllo=no
pexMode=RC
disL2Cache=no
setL2CacheWT=yes
disL2Prefetch=yes
enaICPref=yes
enaDCPref=yes
sata_dma_mode=yes
MALLOC_len=1
ethprime=egiga0
netbsd_en=no
vxworks_en=no
bootargs_root=root=/dev/nfs rw
bootargs_end=:::DB88FXX81:eth0:none
image_name=uImage
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;
lcd0_enable=0
lcd0_params=640x480-16@60
bootdelay=3
disaMvPnp=no
ethaddr=00:50:43:3c:3b:5d
ethmtu=1500
mvPhoneConfig=mv_phone_config=dev[0]:fxs,dev[1]:fxo
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
usb0Mode=host
pcieTune=no
pcieTune1=no
ethact=egiga0
bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root)) earlyprintk=serial
Environment size: 1175/4092 bytes
Marvell>> printenv bootargs
bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root)) earlyprintk=serial
Marvell>>
bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root)) earlyprintk=serial
Marvell>> setenv ipaddr 192.168.10.200
Marvell>>
Marvell>> setenv serverip 192.168.10.120
Marvell>>
Marvell>> setenv netmask 255.255.255.0
Marvell>>
Marvell>> ping 192.168.10.120
Using egiga0 device
host 192.168.10.120 is alive
Marvell>> tftpboot 0x800000 uImage
Using egiga0 device
TFTP from server 192.168.10.120; our IP address is 192.168.10.200
Filename 'uImage'.
Load address: 0x800000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##########################
done
Bytes transferred = 5457740 (53474c hex)
Marvell>> tftpboot 0x2100000 uIntird
Using egiga0 device
TFTP from server 192.168.10.120; our IP address is 192.168.10.200
Filename 'uIntird'.
Load address: 0x2100000
Loading: *
TFTP error: 'File not found' (1)
Starting again
error
*** ERROR: `eth1addr' not set
Abort
Marvell>> tftpboot 0x2100000 uInitrd
Using egiga0 device
TFTP from server 192.168.10.120; our IP address is 192.168.10.200
Filename 'uInitrd'.
Load address: 0x2100000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####
done
Bytes transferred = 9671091 (9391b3 hex)
Marvell>> bootm 0x800000 0x2100000
## Booting image at 00800000 ...
Image Name: Linux-5.13.6-kirkwood-tld-1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 5457676 Bytes = 5.2 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 02100000 ...
Image Name: initramfs-5.13.6-kirkwood-tld-1
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 9671027 Bytes = 9.2 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000][ T0] Booting Linux on physical CPU 0x0
[ 0.000000][ T0] Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021
[ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000][ T0] OF: fdt: Machine model: Synology DS413j
[ 0.000000][ T0] printk: bootconsole [earlycon0] enabled
[ 0.000000][ T0] Memory policy: Data cache writeback
[ 0.000000][ T0] Zone ranges:
[ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Movable zone start for each node
[ 0.000000][ T0] Early memory node ranges
[ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root)) earlyprintk=serial
[ 0.000000][ T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000][ T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000][ T0] Memory: 490912K/524288K available (11264K kernel code, 1553K rwdata, 4272K rodata, 1024K init, 309K bss, 33376K reserved, 0K cma-reserved)
[ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x408/0x7b4 with crng_init=0
[ 0.000000][ T0] trace event string verifier disabled
[ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000][ T0] Trampoline variant of Tasks RCU enabled.
[ 0.000000][ T0] Tracing variant of Tasks RCU enabled.
[ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000001][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.008516][ T0] Switching to timer-based delay loop, resolution 5ns
[ 0.015792][ T0] Console: colour dummy device 80x30
[ 0.020993][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[ 0.032205][ T0] pid_max: default: 32768 minimum: 301
[ 0.037801][ T0] LSM: Security Framework initializing
[ 0.043255][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.051276][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.060824][ T0] CPU: Testing write buffer coherency: ok
[ 0.068194][ T1] Setting up static identity map for 0x100000 - 0x100058
[ 0.075342][ T1] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
[ 0.081422][ T1] rcu: Hierarchical SRCU implementation.
[ 0.087925][ T1] devtmpfs: initialized
[ 0.099973][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.110548][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.146083][ T1] prandom32: self test passed (less than 6 bits correlated)
[ 0.153232][ T1] prandom: seed boundary self test passed
[ 0.161953][ T1] prandom: 100 self tests passed
[ 0.166729][ T1] pinctrl core: initialized pinctrl subsystem
[ 0.173911][ T1] NET: Registered protocol family 16
[ 0.179678][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.187952][ T1] audit: initializing netlink subsys (disabled)
[ 0.195136][ T1] thermal_sys: Registered thermal governor 'step_wise'
[ 0.195463][ T16] audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
[ 0.210709][ T1] cpuidle: using governor ladder
[ 0.215553][ T1] cpuidle: using governor menu
[ 0.220612][ T1] Feroceon L2: Enabling L2
[ 0.224892][ T1] Feroceon L2: Cache support initialised.
[ 0.240546][ T1] No ATAGs?
[ 2.568523][ C0] random: fast init done
[ 3.893590][ T39] "cryptomgr_test" (39) uses obsolete ecb(arc4) skcipher
[ 3.919958][ T59] wait_for_initramfs() called before rootfs_initcalls
[ 4.108653][ T1] raid6: int32x8 gen() 150 MB/s
[ 4.278661][ T1] raid6: int32x8 xor() 91 MB/s
[ 4.448698][ T1] raid6: int32x4 gen() 146 MB/s
[ 4.618642][ T1] raid6: int32x4 xor() 95 MB/s
[ 4.788547][ T1] raid6: int32x2 gen() 190 MB/s
[ 4.958599][ T1] raid6: int32x2 xor() 113 MB/s
[ 5.128667][ T1] raid6: int32x1 gen() 131 MB/s
[ 5.298528][ T1] raid6: int32x1 xor() 81 MB/s
[ 5.303475][ T1] raid6: using algorithm int32x2 gen() 190 MB/s
[ 5.309552][ T1] raid6: .... xor() 113 MB/s, rmw enabled
[ 5.315096][ T1] raid6: using intx1 recovery algorithm
[ 5.320706][ T1] vgaarb: loaded
[ 5.324529][ T1] SCSI subsystem initialized
[ 5.329391][ T1] usbcore: registered new interface driver usbfs
[ 5.335590][ T1] usbcore: registered new interface driver hub
[ 5.341645][ T1] usbcore: registered new device driver usb
[ 5.347518][ T1] pps_core: LinuxPPS API ver. 1 registered
[ 5.353171][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 5.362982][ T1] PTP clock support registered
[ 5.369079][ T1] clocksource: Switched to clocksource orion_clocksource
[ 5.459604][ T1] VFS: Disk quotas dquot_6.6.0
[ 5.464279][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.495562][ T1] NET: Registered protocol family 2
[ 5.509240][ T1] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 5.529430][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 5.538468][ T1] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 5.559182][ T1] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 5.567032][ T1] TCP: Hash tables configured (established 4096 bind 4096)
[ 5.589317][ T1] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 5.597257][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.619113][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.626931][ T1] NET: Registered protocol family 1
[ 5.649659][ T1] RPC: Registered named UNIX socket transport module.
[ 5.656247][ T1] RPC: Registered udp transport module.
[ 5.669097][ T1] RPC: Registered tcp transport module.
[ 5.674477][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.699100][ T1] PCI: CLS 0 bytes, default 32
[ 5.703951][ T1] NetWinder Floating Point Emulator V0.97 (double precision)
[ 5.711429][ T58] Trying to unpack rootfs image as initramfs...
[ 7.014625][ T58] Freeing initrd memory: 9448K
[ 7.368609][ T1] Initialise system trusted keyrings
[ 7.373824][ T1] Key type blacklist registered
[ 7.378698][ T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 7.385956][ T1] zbud: loaded
[ 7.390380][ T1] NFS: Registering the id_resolver key type
[ 7.396123][ T1] Key type id_resolver registered
[ 7.401043][ T1] Key type id_legacy registered
[ 7.405755][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 7.413147][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 7.421215][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.428451][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 7.436551][ T1] fuse: init (API version 7.34)
[ 7.441573][ T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 7.448844][ T1] orangefs_init: module version upstream loaded
[ 7.454974][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
[ 7.541554][ T1] xor: measuring software checksum speed
[ 7.553717][ T1] arm4regs : 1485 MB/sec
[ 7.569856][ T1] 8regs : 890 MB/sec
[ 7.582519][ T1] 32regs : 1296 MB/sec
[ 7.587554][ T1] xor: using function: arm4regs (1485 MB/sec)
[ 7.593489][ T1] async_tx: api initialized (async)
[ 7.598525][ T1] Key type asymmetric registered
[ 7.603321][ T1] Asymmetric key parser 'x509' registered
[ 7.608918][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 7.617064][ T1] io scheduler bfq registered
[ 7.771096][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 7.780680][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: host bridge /mbus@f1000000/pcie@82000000 ranges:
[ 7.790555][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000
[ 7.800636][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1044000..0x00f1045fff -> 0x0000044000
[ 7.810717][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1080000..0x00f1081fff -> 0x0000080000
[ 7.820799][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 7.831398][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 7.841990][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 7.852576][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 7.863480][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[ 7.871733][ T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 7.877897][ T1] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff])
[ 7.888739][ T1] pci_bus 0000:00: root bus resource [mem 0xf1044000-0xf1045fff] (bus address [0x00044000-0x00045fff])
[ 7.899581][ T1] pci_bus 0000:00: root bus resource [mem 0xf1080000-0xf1081fff] (bus address [0x00080000-0x00081fff])
[ 7.910421][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 7.917958][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 7.925030][ T1] pci 0000:00:01.0: [11ab:6282] type 01 class 0x060400
[ 7.931738][ T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[ 7.939449][ T1] pci 0000:00:02.0: [11ab:6282] type 01 class 0x060400
[ 7.946135][ T1] pci 0000:00:02.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[ 7.955235][ T1] PCI: bus0: Fast back to back transfers disabled
[ 7.961515][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.970212][ T1] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.979052][ T1] pci 0000:01:00.0: [11ab:7042] type 00 class 0x010000
[ 7.985769][ T1] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x900fffff 64bit]
[ 7.993244][ T1] pci 0000:01:00.0: reg 0x18: [io 0xf0000000-0xf00000ff]
[ 8.000312][ T1] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 8.000 Gb/s with 2.5 GT/s PCIe x4 link)
[ 8.015984][ T1] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 8.028307][ T1] PCI: bus1: Fast back to back transfers disabled
[ 8.034582][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 8.043622][ T1] PCI: bus2: Fast back to back transfers enabled
[ 8.049813][ T1] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 8.057248][ T1] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff]
[ 8.064815][ T1] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff]
[ 8.071855][ T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pref]
[ 8.079761][ T1] pci 0000:00:02.0: BAR 6: assigned [mem 0xe0200000-0xe02007ff pref]
[ 8.087654][ T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit]
[ 8.095648][ T1] pci 0000:01:00.0: BAR 2: assigned [io 0x10000-0x100ff]
[ 8.102606][ T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 8.108246][ T1] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff]
[ 8.115192][ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 8.122667][ T1] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 8.128394][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0143)
[ 8.135711][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
[ 8.199932][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 8.209950][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
[ 8.269927][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 8.280217][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 8.288406][ T1] printk: console [ttyS0] disabled
[ 8.293488][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A
[ 8.303191][ T1] printk: console [ttyS0] enabled
[ 8.303191][ T1] printk: console [ttyS0] enabled
[ 8.313019][ T1] printk: bootconsole [earlycon0] disabled
[ 8.313019][ T1] printk: bootconsole [earlycon0] disabled
[ 8.325039][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 12500000) is a 16550A
[ 8.341760][ T1] loop: module loaded
[ 8.346122][ T1] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
[ 8.360344][ T1] scsi host0: sata_mv
[ 8.364733][ T1] scsi host1: sata_mv
[ 8.369063][ T1] scsi host2: sata_mv
[ 8.373463][ T1] scsi host3: sata_mv
[ 8.377523][ T1] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 37
[ 8.385963][ T1] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 37
[ 8.394375][ T1] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 37
[ 8.402788][ T1] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 37
[ 8.412527][ T1] sata_mv f1080000.sata: slots 32 ports 2
[ 8.421427][ T1] scsi host4: sata_mv
[ 8.425800][ T1] scsi host5: sata_mv
[ 8.429907][ T1] ata5: SATA max UDMA/133 irq 34
[ 8.434731][ T1] ata6: SATA max UDMA/133 irq 34
[ 8.441158][ T1] spi-nor spi0.0: found n25q064, expected m25p80
[ 8.447646][ T1] spi-nor spi0.0: n25q064 (8192 Kbytes)
[ 8.453120][ T1] mtd: bad character after partition ())
[ 8.458666][ T1] 6 fixed-partitions partitions found on MTD device spi0.0
[ 8.465765][ T1] Creating 6 MTD partitions on "spi0.0":
[ 8.471310][ T1] 0x000000000000-0x000000080000 : "RedBoot"
[ 8.478359][ T1] 0x000000080000-0x000000280000 : "zImage"
[ 8.485251][ T1] 0x000000280000-0x0000003c0000 : "rd.gz"
[ 8.492054][ T1] 0x0000003c0000-0x0000003d0000 : "vendor"
[ 8.498895][ T1] 0x0000003d0000-0x0000003f0000 : "RedBoot config"
[ 8.506487][ T1] 0x0000003f0000-0x000000400000 : "FIS directory"
[ 8.514363][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 8.522966][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 8.534277][ T1] libphy: Fixed MDIO Bus: probed
[ 8.540313][ T1] libphy: orion_mdio_bus: probed
[ 8.545314][ T1] mdio_bus f1072004.mdio-bus-mii: MDIO device at address 8 is missing.
[ 8.566523][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 8.576039][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:3c:3b:5d
[ 8.585690][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.593046][ T1] ehci-pci: EHCI PCI platform driver
[ 8.598266][ T1] ehci-orion: EHCI orion driver
[ 8.603200][ T1] orion-ehci f1050000.ehci: EHCI Host Controller
[ 8.609502][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 8.618049][ T1] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000
[ 8.649099][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 8.656103][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[ 8.665168][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.673169][ T1] usb usb1: Product: EHCI Host Controller
[ 8.678799][ T1] usb usb1: Manufacturer: Linux 5.13.6-kirkwood-tld-1 ehci_hcd
[ 8.686272][ T1] usb usb1: SerialNumber: f1050000.ehci
[ 8.692326][ T1] hub 1-0:1.0: USB hub found
[ 8.696875][ T1] hub 1-0:1.0: 1 port detected
[ 8.702222][ T1] usbcore: registered new interface driver usb-storage
[ 8.709378][ T1] mousedev: PS/2 mouse device common for all mice
[ 8.715952][ T1] i2c /dev entries driver
[ 8.721785][ T1] rtc-s35390a 0-0030: error resetting chip
[ 8.728026][ T1] rtc-s35390a: probe of 0-0030 failed with error -5
[ 8.735268][ T1] device-mapper: uevent: version 1.0.3
[ 8.740695][ T94] ata1: SATA link down (SStatus 0 SControl 300)
[ 8.747115][ T1] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 8.756697][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 8.764557][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 8.771965][ T104] ata5: SATA link down (SStatus 0 SControl F300)
[ 8.778212][ T1] device-mapper: multipath service-time: version 0.3.0 loaded
[ 8.785638][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[ 8.792497][ T1] device-mapper: raid: Loading target version 1.15.1
[ 8.801164][ T1] hid: raw HID events driver (C) Jiri Kosina
[ 8.807350][ T1] drop_monitor: Initializing network drop monitor service
[ 8.814752][ T1] NET: Registered protocol family 10
[ 8.821044][ T1] Segment Routing with IPv6
[ 8.825431][ T1] RPL Segment Routing with IPv6
[ 8.830298][ T1] NET: Registered protocol family 17
[ 8.835656][ T1] Key type dns_resolver registered
[ 8.841290][ T1] registered taskstats version 1
[ 8.846120][ T1] Loading compiled-in X.509 certificates
[ 8.852001][ T1] zswap: loaded using pool lzo/zbud
[ 8.857359][ T1] Key type ._fscrypt registered
[ 8.862158][ T1] Key type .fscrypt registered
[ 8.866799][ T1] Key type fscrypt-provisioning registered
[ 8.874043][ T1] Key type big_key registered
[ 8.902377][ T1] Key type encrypted registered
[ 8.989122][ T117] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 9.103043][ T96] ata2: SATA link down (SStatus 0 SControl 300)
[ 9.190684][ T117] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.32
[ 9.199631][ T117] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 9.207516][ T117] usb 1-1: Product: USB2.0 Hub
[ 9.212981][ T117] hub 1-1:1.0: USB hub found
[ 9.217811][ T117] hub 1-1:1.0: 4 ports detected
[ 9.450636][ T98] ata3: SATA link down (SStatus 0 SControl 300)
[ 9.790656][ T100] ata4: SATA link down (SStatus 0 SControl 300)
[ 10.130591][ T106] ata6: SATA link down (SStatus 0 SControl F300)
[ 10.149898][ T1] Freeing unused kernel memory: 1024K
[ 10.155861][ T1] Checked W+X mappings: passed, no W+X pages found
[ 10.162277][ T1] Run /init as init process
Loading, please wait...
Starting version 247.3-6
[ 21.209498][ T149] reg-fixed-voltage regulators-hdd-30-4:regulator@3: nonexclusive access to GPIO for regulators-hdd-30-4:regulator@3
[ 24.484440][ C0] random: crng init done
[ 26.250629][ T149] reg-fixed-voltage regulators-hdd-30-4:regulator@4: nonexclusive access to GPIO for regulators-hdd-30-4:regulator@4
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
done.
Gave up waiting for root file system device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! LABEL=rootfs does not exist. Dropping to a shell!
BusyBox v1.30.1 (Debian 1:1.30.1-6+b3) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs)
I don't know if i'm right to close the parenthesis... is it a mistake of you or me ?
i tried after the three lines of commands (btw no way to copy/paste anymore either in minicom or picocom ?! trying my best to not make mistake or typos). it's a pity without copy and paste working correctly !
[ 21.363461][ T154] reg-fixed-voltage regulators-hdd-30-4:regulator@3: nonexclusive access to GPIO for regulators-hdd-30-4:regulator@3
Marvell>>
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root) earlyprintk=serial;
Unknown command 'setenv' - try 'help'
Unknown command '' - try 'help'
Marvell>>
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root) earlyprintk=serial;
Unknown command 'setenv' - try 'help'
Unknown command '' - try 'help'
Marvell>>
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Unknown command 'setenv' - try 'help'
Marvell>>
Marvell>>
Terminating...
Skipping tty reset...
Thanks for using picocom
root@rasp2:~/picocom# picocom -b 115200 /dev/ttyUSB0
picocom v3.2a
port is : /dev/ttyUSB0
flowcontrol : none
baudrate is : 115200
parity is : none
databits are : 8
stopbits are : 1
escape is : C-a
local echo is : no
noinit is : no
noreset is : no
hangup is : no
nolock is : no
send_cmd is : sz -vv
receive_cmd is : rz -vv -E
imap is :
omap is :
emap is : crcrlf,delbs,
logfile is : none
initstring : none
exit_after is : not set
exit is : no
Type [C-a] [C-h] to see available commands
Terminal ready
Unknown command '' - try 'help'
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Unknown command 'setenv' - try 'help'
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root) earlyprintk=serial;
Unknown command 'setenv' - try 'help'
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root) earlyprint=serial
Marvell>> setenv ipaddr 192.168.10.200; setenv serverip 192.168.10.120; setenv netmask 255.255.255.0
Marvell>>ping 192.168.10.120
Using egiga0 device
host 192.168.10.120 is alive
Marvell>> tftpboot 0x800000 uImage; tftpboot 0x2100000 uInitrd; bootm 0x800000 0x2100000
Using egiga0 device
TFTP from server 192.168.10.120; our IP address is 192.168.10.200
Filename 'uImage'.
Load address: 0x800000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##########################
done
Bytes transferred = 5457740 (53474c hex)
Using egiga0 device
TFTP from server 192.168.10.120; our IP address is 192.168.10.200
Filename 'uInitrd'.
Load address: 0x2100000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
########################################################T #########
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####
done
Bytes transferred = 9671091 (9391b3 hex)
## Booting image at 00800000 ...
Image Name: Linux-5.13.6-kirkwood-tld-1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 5457676 Bytes = 5.2 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 02100000 ...
Image Name: initramfs-5.13.6-kirkwood-tld-1
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 9671027 Bytes = 9.2 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000][ T0] Booting Linux on physical CPU 0x0
[ 0.000000][ T0] Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021
[ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000][ T0] OF: fdt: Machine model: Synology DS413j
[ 0.000000][ T0] Memory policy: Data cache writeback
[ 0.000000][ T0] Zone ranges:
[ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Movable zone start for each node
[ 0.000000][ T0] Early memory node ranges
[ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root) earlyprint=serial
[ 0.000000][ T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000][ T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000][ T0] Memory: 490912K/524288K available (11264K kernel code, 1553K rwdata, 4272K rodata, 1024K init, 309K bss, 33376K reserved, 0K cma-reserved)
[ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x408/0x7b4 with crng_init=0
[ 0.000000][ T0] trace event string verifier disabled
[ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000][ T0] Trampoline variant of Tasks RCU enabled.
[ 0.000000][ T0] Tracing variant of Tasks RCU enabled.
[ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000001][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.000046][ T0] Switching to timer-based delay loop, resolution 5ns
[ 0.000748][ T0] Console: colour dummy device 80x30
[ 0.000805][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[ 0.000839][ T0] pid_max: default: 32768 minimum: 301
[ 0.001158][ T0] LSM: Security Framework initializing
[ 0.001298][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001336][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.002462][ T0] CPU: Testing write buffer coherency: ok
[ 0.004308][ T1] Setting up static identity map for 0x100000 - 0x100058
[ 0.004567][ T1] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
[ 0.004826][ T1] rcu: Hierarchical SRCU implementation.
[ 0.005886][ T1] devtmpfs: initialized
[ 0.013919][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.013961][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.042083][ T1] prandom32: self test passed (less than 6 bits correlated)
[ 0.042116][ T1] prandom: seed boundary self test passed
[ 0.045271][ T1] prandom: 100 self tests passed
[ 0.045286][ T1] pinctrl core: initialized pinctrl subsystem
[ 0.046550][ T1] NET: Registered protocol family 16
[ 0.047170][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.047927][ T1] audit: initializing netlink subsys (disabled)
[ 0.049032][ T1] thermal_sys: Registered thermal governor 'step_wise'
[ 0.049354][ T16] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[ 0.049499][ T1] cpuidle: using governor ladder
[ 0.049572][ T1] cpuidle: using governor menu
[ 0.050002][ T1] Feroceon L2: Enabling L2
[ 0.050042][ T1] Feroceon L2: Cache support initialised.
[ 0.060153][ T1] No ATAGs?
[ 2.560052][ C0] random: fast init done
[ 3.706227][ T39] "cryptomgr_test" (39) uses obsolete ecb(arc4) skcipher
[ 3.725637][ T59] wait_for_initramfs() called before rootfs_initcalls
[ 3.910229][ T1] raid6: int32x8 gen() 150 MB/s
[ 4.080138][ T1] raid6: int32x8 xor() 91 MB/s
[ 4.250080][ T1] raid6: int32x4 gen() 145 MB/s
[ 4.420117][ T1] raid6: int32x4 xor() 95 MB/s
[ 4.590163][ T1] raid6: int32x2 gen() 186 MB/s
[ 4.760148][ T1] raid6: int32x2 xor() 113 MB/s
[ 4.930183][ T1] raid6: int32x1 gen() 131 MB/s
[ 5.100081][ T1] raid6: int32x1 xor() 77 MB/s
[ 5.100095][ T1] raid6: using algorithm int32x2 gen() 186 MB/s
[ 5.100106][ T1] raid6: .... xor() 113 MB/s, rmw enabled
[ 5.100115][ T1] raid6: using intx1 recovery algorithm
[ 5.100347][ T1] vgaarb: loaded
[ 5.100800][ T1] SCSI subsystem initialized
[ 5.101224][ T1] usbcore: registered new interface driver usbfs
[ 5.101282][ T1] usbcore: registered new interface driver hub
[ 5.101327][ T1] usbcore: registered new device driver usb
[ 5.101491][ T1] pps_core: LinuxPPS API ver. 1 registered
[ 5.101504][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 5.101531][ T1] PTP clock support registered
[ 5.103019][ T1] clocksource: Switched to clocksource orion_clocksource
[ 5.183569][ T1] VFS: Disk quotas dquot_6.6.0
[ 5.183660][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.196651][ T1] NET: Registered protocol family 2
[ 5.196812][ T1] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 5.197840][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 5.197890][ T1] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 5.197960][ T1] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 5.198019][ T1] TCP: Hash tables configured (established 4096 bind 4096)
[ 5.198211][ T1] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 5.198275][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.198309][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.198499][ T1] NET: Registered protocol family 1
[ 5.203530][ T1] RPC: Registered named UNIX socket transport module.
[ 5.203550][ T1] RPC: Registered udp transport module.
[ 5.203560][ T1] RPC: Registered tcp transport module.
[ 5.203569][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.203583][ T1] PCI: CLS 0 bytes, default 32
[ 5.203745][ T1] NetWinder Floating Point Emulator V0.97 (double precision)
[ 5.204211][ T58] Trying to unpack rootfs image as initramfs...
[ 6.490869][ T58] Freeing initrd memory: 9448K
[ 6.962064][ T1] Initialise system trusted keyrings
[ 6.962120][ T1] Key type blacklist registered
[ 6.962342][ T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 6.962445][ T1] zbud: loaded
[ 6.963710][ T1] NFS: Registering the id_resolver key type
[ 6.963743][ T1] Key type id_resolver registered
[ 6.963755][ T1] Key type id_legacy registered
[ 6.963789][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 6.963810][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 6.963822][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 6.964045][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 6.964428][ T1] fuse: init (API version 7.34)
[ 6.964753][ T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 6.964929][ T1] orangefs_init: module version upstream loaded
[ 6.964944][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
[ 7.041609][ T1] xor: measuring software checksum speed
[ 7.048292][ T1] arm4regs : 1485 MB/sec
[ 7.059392][ T1] 8regs : 890 MB/sec
[ 7.067048][ T1] 32regs : 1296 MB/sec
[ 7.067063][ T1] xor: using function: arm4regs (1485 MB/sec)
[ 7.067081][ T1] async_tx: api initialized (async)
[ 7.067097][ T1] Key type asymmetric registered
[ 7.067107][ T1] Asymmetric key parser 'x509' registered
[ 7.067167][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 7.067232][ T1] io scheduler bfq registered
[ 7.216872][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 7.218467][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: host bridge /mbus@f1000000/pcie@82000000 ranges:
[ 7.218536][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000
[ 7.218572][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1044000..0x00f1045fff -> 0x0000044000
[ 7.218607][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1080000..0x00f1081fff -> 0x0000080000
[ 7.218640][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 7.218673][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 7.218704][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 7.218729][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 7.219061][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[ 7.219080][ T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 7.219099][ T1] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff])
[ 7.219117][ T1] pci_bus 0000:00: root bus resource [mem 0xf1044000-0xf1045fff] (bus address [0x00044000-0x00045fff])
[ 7.219134][ T1] pci_bus 0000:00: root bus resource [mem 0xf1080000-0xf1081fff] (bus address [0x00080000-0x00081fff])
[ 7.219150][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 7.219166][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 7.219306][ T1] pci 0000:00:01.0: [11ab:6282] type 01 class 0x060400
[ 7.219336][ T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[ 7.219672][ T1] pci 0000:00:02.0: [11ab:6282] type 01 class 0x060400
[ 7.219705][ T1] pci 0000:00:02.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[ 7.221426][ T1] PCI: bus0: Fast back to back transfers disabled
[ 7.221455][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.221485][ T1] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.221674][ T1] pci 0000:01:00.0: [11ab:7042] type 00 class 0x010000
[ 7.221712][ T1] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x900fffff 64bit]
[ 7.221737][ T1] pci 0000:01:00.0: reg 0x18: [io 0xf0000000-0xf00000ff]
[ 7.221872][ T1] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 8.000 Gb/s with 2.5 GT/s PCIe x4 link)
[ 7.222052][ T1] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 7.223725][ T1] PCI: bus1: Fast back to back transfers disabled
[ 7.223750][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 7.225505][ T1] PCI: bus2: Fast back to back transfers enabled
[ 7.225528][ T1] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 7.225698][ T1] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff]
[ 7.225721][ T1] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff]
[ 7.225740][ T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pref]
[ 7.225760][ T1] pci 0000:00:02.0: BAR 6: assigned [mem 0xe0200000-0xe02007ff pref]
[ 7.225782][ T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit]
[ 7.225808][ T1] pci 0000:01:00.0: BAR 2: assigned [io 0x10000-0x100ff]
[ 7.225828][ T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 7.225843][ T1] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff]
[ 7.225860][ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 7.225880][ T1] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 7.225974][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0143)
[ 7.226527][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
[ 7.283890][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 7.285935][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
[ 7.343853][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 7.346138][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 7.347323][ T1] printk: console [ttyS0] disabled
[ 7.347401][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A
[ 8.548796][ T1] printk: console [ttyS0] enabled
[ 8.554380][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 12500000) is a 16550A
[ 8.570996][ T1] loop: module loaded
[ 8.575435][ T1] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
[ 8.589571][ T1] scsi host0: sata_mv
[ 8.594002][ T1] scsi host1: sata_mv
[ 8.598350][ T1] scsi host2: sata_mv
[ 8.602668][ T1] scsi host3: sata_mv
[ 8.606777][ T1] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 37
[ 8.615195][ T1] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 37
[ 8.623602][ T1] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 37
[ 8.631994][ T1] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 37
[ 8.641735][ T1] sata_mv f1080000.sata: slots 32 ports 2
[ 8.650601][ T1] scsi host4: sata_mv
[ 8.655026][ T1] scsi host5: sata_mv
[ 8.659084][ T1] ata5: SATA max UDMA/133 irq 34
[ 8.663951][ T1] ata6: SATA max UDMA/133 irq 34
[ 8.670348][ T1] spi-nor spi0.0: found n25q064, expected m25p80
[ 8.676860][ T1] spi-nor spi0.0: n25q064 (8192 Kbytes)
[ 8.682308][ T1] 1 cmdlinepart partitions found on MTD device spi0.0
[ 8.688973][ T1] Creating 1 MTD partitions on "spi0.0":
[ 8.694520][ T1] 0x000000000000-0x000000080000 : "uboot,0x700000@0x100000(root"
[ 8.703745][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 8.712322][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 8.723620][ T1] libphy: Fixed MDIO Bus: probed
[ 8.729626][ T1] libphy: orion_mdio_bus: probed
[ 8.734672][ T1] mdio_bus f1072004.mdio-bus-mii: MDIO device at address 8 is missing.
[ 8.755852][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 8.765328][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:3c:3b:5d
[ 8.774979][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.782262][ T1] ehci-pci: EHCI PCI platform driver
[ 8.787557][ T1] ehci-orion: EHCI orion driver
[ 8.792451][ T1] orion-ehci f1050000.ehci: EHCI Host Controller
[ 8.798742][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 8.807328][ T1] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000
[ 8.843062][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 8.850025][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[ 8.859059][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.867061][ T1] usb usb1: Product: EHCI Host Controller
[ 8.872690][ T1] usb usb1: Manufacturer: Linux 5.13.6-kirkwood-tld-1 ehci_hcd
[ 8.880152][ T1] usb usb1: SerialNumber: f1050000.ehci
[ 8.886151][ T1] hub 1-0:1.0: USB hub found
[ 8.890687][ T1] hub 1-0:1.0: 1 port detected
[ 8.896051][ T1] usbcore: registered new interface driver usb-storage
[ 8.903196][ T1] mousedev: PS/2 mouse device common for all mice
[ 8.909771][ T1] i2c /dev entries driver
[ 8.915623][ T1] rtc-s35390a 0-0030: error resetting chip
[ 8.921862][ T1] rtc-s35390a: probe of 0-0030 failed with error -5
[ 8.929109][ T1] device-mapper: uevent: version 1.0.3
[ 8.934773][ T1] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 8.944349][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 8.951654][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 8.959061][ T1] device-mapper: multipath service-time: version 0.3.0 loaded
[ 8.966502][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[ 8.973383][ T94] ata1: SATA link down (SStatus 0 SControl 300)
[ 8.979536][ T1] device-mapper: raid: Loading target version 1.15.1
[ 8.988269][ T1] hid: raw HID events driver (C) Jiri Kosina
[ 8.994507][ T1] drop_monitor: Initializing network drop monitor service
[ 9.002449][ T1] NET: Registered protocol family 10
[ 9.007682][ T104] ata5: SATA link down (SStatus 0 SControl F300)
[ 9.015010][ T1] Segment Routing with IPv6
[ 9.019397][ T1] RPL Segment Routing with IPv6
[ 9.024307][ T1] NET: Registered protocol family 17
[ 9.029684][ T1] Key type dns_resolver registered
[ 9.035307][ T1] registered taskstats version 1
[ 9.040129][ T1] Loading compiled-in X.509 certificates
[ 9.046003][ T1] zswap: loaded using pool lzo/zbud
[ 9.051363][ T1] Key type ._fscrypt registered
[ 9.056159][ T1] Key type .fscrypt registered
[ 9.060799][ T1] Key type fscrypt-provisioning registered
[ 9.068051][ T1] Key type big_key registered
[ 9.096138][ T1] Key type encrypted registered
[ 9.183047][ T117] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 9.334570][ T96] ata2: SATA link down (SStatus 0 SControl 300)
[ 9.384835][ T117] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.32
[ 9.393780][ T117] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 9.401667][ T117] usb 1-1: Product: USB2.0 Hub
[ 9.407117][ T117] hub 1-1:1.0: USB hub found
[ 9.411961][ T117] hub 1-1:1.0: 4 ports detected
[ 9.674582][ T98] ata3: SATA link down (SStatus 0 SControl 300)
[ 10.014598][ T100] ata4: SATA link down (SStatus 0 SControl 300)
[ 10.354638][ T106] ata6: SATA link down (SStatus 0 SControl F300)
[ 10.373984][ T1] Freeing unused kernel memory: 1024K
[ 10.379945][ T1] Checked W+X mappings: passed, no W+X pages found
[ 10.386363][ T1] Run /init as init process
Loading, please wait...
Starting version 247.3-6
[ 21.363461][ T154] reg-fixed-voltage regulators-hdd-30-4:regulator@3: nonexclusive access to GPIO for regulators-hdd-30-4:regulator@3
[ 24.602880][ C0] random: crng init done
[ 26.404518][ T154] reg-fixed-voltage regulators-hdd-30-4:regulator@4: nonexclusive access to GPIO for regulators-hdd-30-4:regulator@4
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
done.
Gave up waiting for root file system device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! LABEL=rootfs does not exist. Dropping to a shell!
BusyBox v1.30.1 (Debian 1:1.30.1-6+b3) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) ▒
|
Re: Install Debian on Synology DS413J March 10, 2023 07:45AM |
Registered: 1 year ago Posts: 178 |
not working... i can't boot on my sda. Wednesday it was working :(
** MARVELL BOARD: Synology Disk Station LE
U-Boot 1.1.4 (May 22 2012 - 19:52:31) Marvell version: 3.5.9
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 0068B3D4
Soc: 88F6282 A1CPU running @ 1600Mhz L2 running @ 533Mhz
SysClock = 533Mhz , TClock = 200Mhz
DRAM (DDR3) CAS Latency = 7 tRP = 7 tRAS = 20 tRCD=7
DRAM CS[0] base 0x00000000 size 512MB
DRAM Total size 512MB 16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
Using default environment
[8192kB@f8000000] Flash: 8 MB
CPU : Marvell Feroceon (Rev 1)
Streaming disabled
Write allocate disabled
USB 0: host mode
PEX 0: PCI Express Root Complex Interface
PEX interface detected Link X1
PEX 1: interface detected no Link.
Synology Model: DS413j
Fan Status: Not Good
Fan 1: Not Good
Fan 2: Not Good
Net: egiga0 [PRIME], egiga1
Hit any key to stop autoboot: 0
## Booting image at f8090000 ...
Bad Magic Number
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Unknown command 'setenv' - try 'help'
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Unknown command 'setenv' - try 'help'
Marvell>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
Marvell>> setenv mtdparts 'mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root)'
Marvell>> setenv ipaddr 192.168.10.200
Marvell>> setenv serverip 192.168.10.120
Marvell>> setenv netmask 255.255.255.0
Marvell>> tftpboot 0x800000 uImage; tftpboot 0x2100000 uInitrd; bootm 0x800000 0x2100000
Using egiga0 device
TFTP from server 192.168.10.120; our IP address is 192.168.10.200
Filename 'uImage'.
Load address: 0x800000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##########################
done
Bytes transferred = 5457740 (53474c hex)
Using egiga0 device
TFTP from server 192.168.10.120; our IP address is 192.168.10.200
Filename 'uInitrd'.
Load address: 0x2100000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################T ################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####
done
Bytes transferred = 9671091 (9391b3 hex)
## Booting image at 00800000 ...
Image Name: Linux-5.13.6-kirkwood-tld-1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 5457676 Bytes = 5.2 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 02100000 ...
Image Name: initramfs-5.13.6-kirkwood-tld-1
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 9671027 Bytes = 9.2 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000][ T0] Booting Linux on physical CPU 0x0
[ 0.000000][ T0] Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021
[ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000][ T0] OF: fdt: Machine model: Synology DS413j
[ 0.000000][ T0] printk: bootconsole [earlycon0] enabled
[ 0.000000][ T0] Memory policy: Data cache writeback
[ 0.000000][ T0] Zone ranges:
[ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Movable zone start for each node
[ 0.000000][ T0] Early memory node ranges
[ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
[ 0.000000][ T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000][ T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000][ T0] Memory: 490912K/524288K available (11264K kernel code, 1553K rwdata, 4272K rodata, 1024K init, 309K bss, 33376K reserved, 0K cma-reserved)
[ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x408/0x7b4 with crng_init=0
[ 0.000000][ T0] trace event string verifier disabled
[ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000][ T0] Trampoline variant of Tasks RCU enabled.
[ 0.000000][ T0] Tracing variant of Tasks RCU enabled.
[ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000001][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.008516][ T0] Switching to timer-based delay loop, resolution 5ns
[ 0.015791][ T0] Console: colour dummy device 80x30
[ 0.020985][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[ 0.032196][ T0] pid_max: default: 32768 minimum: 301
[ 0.037798][ T0] LSM: Security Framework initializing
[ 0.043256][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.051277][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.060823][ T0] CPU: Testing write buffer coherency: ok
[ 0.068205][ T1] Setting up static identity map for 0x100000 - 0x100058
[ 0.075359][ T1] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
[ 0.081445][ T1] rcu: Hierarchical SRCU implementation.
[ 0.087955][ T1] devtmpfs: initialized
[ 0.099958][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.110531][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.146058][ T1] prandom32: self test passed (less than 6 bits correlated)
[ 0.153204][ T1] prandom: seed boundary self test passed
[ 0.161926][ T1] prandom: 100 self tests passed
[ 0.166704][ T1] pinctrl core: initialized pinctrl subsystem
[ 0.173871][ T1] NET: Registered protocol family 16
[ 0.179607][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.187877][ T1] audit: initializing netlink subsys (disabled)
[ 0.195078][ T1] thermal_sys: Registered thermal governor 'step_wise'
[ 0.195401][ T16] audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
[ 0.210650][ T1] cpuidle: using governor ladder
[ 0.215491][ T1] cpuidle: using governor menu
[ 0.220527][ T1] Feroceon L2: Enabling L2
[ 0.224805][ T1] Feroceon L2: Cache support initialised.
[ 0.240454][ T1] No ATAGs?
[ 2.568522][ C0] random: fast init done
[ 3.893488][ T39] "cryptomgr_test" (39) uses obsolete ecb(arc4) skcipher
[ 3.919783][ T59] wait_for_initramfs() called before rootfs_initcalls
[ 4.108654][ T1] raid6: int32x8 gen() 150 MB/s
[ 4.278643][ T1] raid6: int32x8 xor() 91 MB/s
[ 4.448677][ T1] raid6: int32x4 gen() 146 MB/s
[ 4.618639][ T1] raid6: int32x4 xor() 95 MB/s
[ 4.788571][ T1] raid6: int32x2 gen() 186 MB/s
[ 4.958628][ T1] raid6: int32x2 xor() 113 MB/s
[ 5.128653][ T1] raid6: int32x1 gen() 130 MB/s
[ 5.298655][ T1] raid6: int32x1 xor() 79 MB/s
[ 5.303596][ T1] raid6: using algorithm int32x2 gen() 186 MB/s
[ 5.309674][ T1] raid6: .... xor() 113 MB/s, rmw enabled
[ 5.315217][ T1] raid6: using intx1 recovery algorithm
[ 5.320822][ T1] vgaarb: loaded
[ 5.324650][ T1] SCSI subsystem initialized
[ 5.329507][ T1] usbcore: registered new interface driver usbfs
[ 5.335702][ T1] usbcore: registered new interface driver hub
[ 5.341758][ T1] usbcore: registered new device driver usb
[ 5.347633][ T1] pps_core: LinuxPPS API ver. 1 registered
[ 5.353284][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 5.363095][ T1] PTP clock support registered
[ 5.369160][ T1] clocksource: Switched to clocksource orion_clocksource
[ 5.459685][ T1] VFS: Disk quotas dquot_6.6.0
[ 5.464359][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.495517][ T1] NET: Registered protocol family 2
[ 5.509326][ T1] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 5.529513][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 5.538555][ T1] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 5.559261][ T1] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 5.567109][ T1] TCP: Hash tables configured (established 4096 bind 4096)
[ 5.589398][ T1] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 5.597334][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.619195][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.627015][ T1] NET: Registered protocol family 1
[ 5.649735][ T1] RPC: Registered named UNIX socket transport module.
[ 5.656324][ T1] RPC: Registered udp transport module.
[ 5.669177][ T1] RPC: Registered tcp transport module.
[ 5.674555][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.699182][ T1] PCI: CLS 0 bytes, default 32
[ 5.704015][ T1] NetWinder Floating Point Emulator V0.97 (double precision)
[ 5.711488][ T58] Trying to unpack rootfs image as initramfs...
[ 7.014932][ T58] Freeing initrd memory: 9448K
[ 7.368680][ T1] Initialise system trusted keyrings
[ 7.373901][ T1] Key type blacklist registered
[ 7.378773][ T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 7.386034][ T1] zbud: loaded
[ 7.390445][ T1] NFS: Registering the id_resolver key type
[ 7.396184][ T1] Key type id_resolver registered
[ 7.401105][ T1] Key type id_legacy registered
[ 7.405816][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 7.413209][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 7.421276][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.428512][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 7.436615][ T1] fuse: init (API version 7.34)
[ 7.441639][ T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 7.448902][ T1] orangefs_init: module version upstream loaded
[ 7.455034][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
[ 7.541404][ T1] xor: measuring software checksum speed
[ 7.553561][ T1] arm4regs : 1485 MB/sec
[ 7.569699][ T1] 8regs : 890 MB/sec
[ 7.582363][ T1] 32regs : 1296 MB/sec
[ 7.587399][ T1] xor: using function: arm4regs (1485 MB/sec)
[ 7.593333][ T1] async_tx: api initialized (async)
[ 7.598369][ T1] Key type asymmetric registered
[ 7.603166][ T1] Asymmetric key parser 'x509' registered
[ 7.608766][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 7.616911][ T1] io scheduler bfq registered
[ 7.770932][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 7.780513][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: host bridge /mbus@f1000000/pcie@82000000 ranges:
[ 7.790381][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000
[ 7.800464][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1044000..0x00f1045fff -> 0x0000044000
[ 7.810544][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1080000..0x00f1081fff -> 0x0000080000
[ 7.820626][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 7.831225][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 7.841817][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 7.852403][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 7.863298][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[ 7.871551][ T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 7.877715][ T1] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff])
[ 7.888557][ T1] pci_bus 0000:00: root bus resource [mem 0xf1044000-0xf1045fff] (bus address [0x00044000-0x00045fff])
[ 7.899400][ T1] pci_bus 0000:00: root bus resource [mem 0xf1080000-0xf1081fff] (bus address [0x00080000-0x00081fff])
[ 7.910240][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 7.917777][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 7.924853][ T1] pci 0000:00:01.0: [11ab:6282] type 01 class 0x060400
[ 7.931566][ T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[ 7.939283][ T1] pci 0000:00:02.0: [11ab:6282] type 01 class 0x060400
[ 7.945971][ T1] pci 0000:00:02.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[ 7.955070][ T1] PCI: bus0: Fast back to back transfers disabled
[ 7.961353][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.970048][ T1] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.978884][ T1] pci 0000:01:00.0: [11ab:7042] type 00 class 0x010000
[ 7.985597][ T1] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x900fffff 64bit]
[ 7.993072][ T1] pci 0000:01:00.0: reg 0x18: [io 0xf0000000-0xf00000ff]
[ 8.000139][ T1] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 8.000 Gb/s with 2.5 GT/s PCIe x4 link)
[ 8.015812][ T1] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 8.028133][ T1] PCI: bus1: Fast back to back transfers disabled
[ 8.034408][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 8.043447][ T1] PCI: bus2: Fast back to back transfers enabled
[ 8.049631][ T1] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 8.057061][ T1] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff]
[ 8.064626][ T1] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff]
[ 8.071665][ T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pref]
[ 8.079571][ T1] pci 0000:00:02.0: BAR 6: assigned [mem 0xe0200000-0xe02007ff pref]
[ 8.087464][ T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit]
[ 8.095458][ T1] pci 0000:01:00.0: BAR 2: assigned [io 0x10000-0x100ff]
[ 8.102416][ T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 8.108056][ T1] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff]
[ 8.115003][ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 8.122477][ T1] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 8.128205][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0143)
[ 8.135534][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
[ 8.200011][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 8.210031][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
[ 8.270012][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 8.280298][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 8.288497][ T1] printk: console [ttyS0] disabled
[ 8.293574][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A
[ 8.303277][ T1] printk: console [ttyS0] enabled
[ 8.303277][ T1] printk: console [ttyS0] enabled
[ 8.313104][ T1] printk: bootconsole [earlycon0] disabled
[ 8.313104][ T1] printk: bootconsole [earlycon0] disabled
[ 8.325128][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 12500000) is a 16550A
[ 8.341839][ T1] loop: module loaded
[ 8.346189][ T1] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
[ 8.360400][ T1] scsi host0: sata_mv
[ 8.364789][ T1] scsi host1: sata_mv
[ 8.369124][ T1] scsi host2: sata_mv
[ 8.373504][ T1] scsi host3: sata_mv
[ 8.377556][ T1] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 37
[ 8.385995][ T1] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 37
[ 8.394409][ T1] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 37
[ 8.402822][ T1] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 37
[ 8.412556][ T1] sata_mv f1080000.sata: slots 32 ports 2
[ 8.421436][ T1] scsi host4: sata_mv
[ 8.425810][ T1] scsi host5: sata_mv
[ 8.429924][ T1] ata5: SATA max UDMA/133 irq 34
[ 8.434748][ T1] ata6: SATA max UDMA/133 irq 34
[ 8.441175][ T1] spi-nor spi0.0: found n25q064, expected m25p80
[ 8.447665][ T1] spi-nor spi0.0: n25q064 (8192 Kbytes)
[ 8.453167][ T1] 6 fixed-partitions partitions found on MTD device spi0.0
[ 8.460271][ T1] Creating 6 MTD partitions on "spi0.0":
[ 8.465796][ T1] 0x000000000000-0x000000080000 : "RedBoot"
[ 8.472868][ T1] 0x000000080000-0x000000280000 : "zImage"
[ 8.479759][ T1] 0x000000280000-0x0000003c0000 : "rd.gz"
[ 8.486520][ T1] 0x0000003c0000-0x0000003d0000 : "vendor"
[ 8.493381][ T1] 0x0000003d0000-0x0000003f0000 : "RedBoot config"
[ 8.500969][ T1] 0x0000003f0000-0x000000400000 : "FIS directory"
[ 8.508802][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 8.517407][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 8.528680][ T1] libphy: Fixed MDIO Bus: probed
[ 8.534761][ T1] libphy: orion_mdio_bus: probed
[ 8.539785][ T1] mdio_bus f1072004.mdio-bus-mii: MDIO device at address 8 is missing.
[ 8.561038][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 8.570514][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:3c:3b:5d
[ 8.580208][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.587495][ T1] ehci-pci: EHCI PCI platform driver
[ 8.592763][ T1] ehci-orion: EHCI orion driver
[ 8.597648][ T1] orion-ehci f1050000.ehci: EHCI Host Controller
[ 8.603949][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 8.612520][ T1] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000
[ 8.649179][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 8.656170][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[ 8.665237][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.673238][ T1] usb usb1: Product: EHCI Host Controller
[ 8.678868][ T1] usb usb1: Manufacturer: Linux 5.13.6-kirkwood-tld-1 ehci_hcd
[ 8.686340][ T1] usb usb1: SerialNumber: f1050000.ehci
[ 8.692400][ T1] hub 1-0:1.0: USB hub found
[ 8.696944][ T1] hub 1-0:1.0: 1 port detected
[ 8.702293][ T1] usbcore: registered new interface driver usb-storage
[ 8.709451][ T1] mousedev: PS/2 mouse device common for all mice
[ 8.716020][ T1] i2c /dev entries driver
[ 8.721848][ T1] rtc-s35390a 0-0030: error resetting chip
[ 8.728088][ T1] rtc-s35390a: probe of 0-0030 failed with error -5
[ 8.735330][ T1] device-mapper: uevent: version 1.0.3
[ 8.740754][ T94] ata1: SATA link down (SStatus 0 SControl 300)
[ 8.747177][ T1] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 8.756750][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 8.764611][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 8.772016][ T104] ata5: SATA link down (SStatus 0 SControl F300)
[ 8.778264][ T1] device-mapper: multipath service-time: version 0.3.0 loaded
[ 8.785689][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[ 8.792549][ T1] device-mapper: raid: Loading target version 1.15.1
[ 8.801226][ T1] hid: raw HID events driver (C) Jiri Kosina
[ 8.807411][ T1] drop_monitor: Initializing network drop monitor service
[ 8.814813][ T1] NET: Registered protocol family 10
[ 8.821100][ T1] Segment Routing with IPv6
[ 8.825482][ T1] RPL Segment Routing with IPv6
[ 8.830349][ T1] NET: Registered protocol family 17
[ 8.835713][ T1] Key type dns_resolver registered
[ 8.841328][ T1] registered taskstats version 1
[ 8.846153][ T1] Loading compiled-in X.509 certificates
[ 8.852036][ T1] zswap: loaded using pool lzo/zbud
[ 8.857398][ T1] Key type ._fscrypt registered
[ 8.862202][ T1] Key type .fscrypt registered
[ 8.866841][ T1] Key type fscrypt-provisioning registered
[ 8.874089][ T1] Key type big_key registered
[ 8.902372][ T1] Key type encrypted registered
[ 8.989204][ T117] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 9.103122][ T96] ata2: SATA link down (SStatus 0 SControl 300)
[ 9.190779][ T117] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.32
[ 9.199726][ T117] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 9.207613][ T117] usb 1-1: Product: USB2.0 Hub
[ 9.213076][ T117] hub 1-1:1.0: USB hub found
[ 9.217906][ T117] hub 1-1:1.0: 4 ports detected
[ 9.450715][ T98] ata3: SATA link down (SStatus 0 SControl 300)
[ 9.790738][ T100] ata4: SATA link down (SStatus 0 SControl 300)
[ 10.130674][ T106] ata6: SATA link down (SStatus 0 SControl F300)
[ 10.149984][ T1] Freeing unused kernel memory: 1024K
[ 10.155947][ T1] Checked W+X mappings: passed, no W+X pages found
[ 10.162362][ T1] Run /init as init process
Loading, please wait...
Starting version 247.3-6
[ 21.209559][ T154] reg-fixed-voltage regulators-hdd-30-4:regulator@3: nonexclusive access to GPIO for regulators-hdd-30-4:regulator@3
[ 24.504210][ C0] random: crng init done
[ 26.250701][ T154] reg-fixed-voltage regulators-hdd-30-4:regulator@4: nonexclusive access to GPIO for regulators-hdd-30-4:regulator@4
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
done.
Gave up waiting for root file system device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! LABEL=rootfs does not exist. Dropping to a shell!
BusyBox v1.30.1 (Debian 1:1.30.1-6+b3) built-in shell (ash)
Enter 'help' for a list of built-in commands.
|
Re: Install Debian on Synology DS413J March 10, 2023 08:02AM |
Registered: 1 year ago Posts: 178 |
root@rasp2:~/tools# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p
Sending boot message. Please reboot the target...\
Sending boot image...
0 % [......................................................................]
1 % [......................................................................]
3 % [......................................................................]
5 % [......................................................................]
6 % [......................................................................]
8 % [......................................................................]
10 % [......................................................................]
11 % [......................................................................]
13 % [......................................................................]
15 % [......................................................................]
17 % [......................................................................]
18 % [......................................................................]
20 % [......................................................................]
22 % [......................................................................]
23 % [......................................................................]
25 % [......................................................................]
27 % [......................................................................]
29 % [......................................................................]
30 % [......................................................................]
32 % [......................................................................]
34 % [......................................................................]
35 % [......................................................................]
37 % [......................................................................]
39 % [......................................................................]
41 % [......................................................................]
42 % [......................................................................]
44 % [......................................................................]
46 % [......................................................................]
47 % [......................................................................]
49 % [......................................................................]
51 % [......................................................................]
53 % [......................................................................]
54 % [......................................................................]
56 % [......................................................................]
58 % [......................................................................]
59 % [......................................................................]
61 % [......................................................................]
63 % [......................................................................]
64 % [......................................................................]
66 % [......................................................................]
68 % [......................................................................]
70 % [......................................................................]
71 % [......................................................................]
73 % [......................................................................]
75 % [......................................................................]
76 % [......................................................................]
78 % [......................................................................]
80 % [......................................................................]
82 % [......................................................................]
83 % [......................................................................]
85 % [......................................................................]
87 % [......................................................................]
88 % [......................................................................]
90 % [......................................................................]
92 % [......................................................................]
94 % [......................................................................]
95 % [......................................................................]
97 % [......................................................................]
99 % [....................................]
[Type Ctrl-\ + c to quit]
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:42:03 -0700)
ZyXEL NSA325 2-Bay Power Media Server
SoC: Kirkwood 88F6282_A1
DRAM: 512 MiB
WARNING: Caches not enabled
NAND: 0 MiB
*** Warning - readenv() failed, using default environment
In: serial
Out: serial
Err: serial
Net: egiga0
MV88E1318 PHY initialized on egiga0
Hit any key to stop autoboot: 0
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Reset IDE: ide_preinit failed
## Unknown partition table type 0
## Unknown partition table type 0
## Unknown partition table type 0
## Unknown partition table type 0
## Unknown partition table type 0
## Unknown partition table type 0
## Unknown partition table type 0
loading envs from usb 0 ...
** Bad device usb 0 **
no IDE devices available
running scan_disk ...
Scan device usb
device usb 0:1
** Bad device usb 0 **
device usb 1:1
** Bad device usb 1 **
device usb 2:1
** Bad device usb 2 **
device usb 3:1
** Bad device usb 3 **
Scan device ide
Reset IDE: ide_preinit failed
device ide 0:1
** Bad device ide 0 **
device ide 1:1
** Bad device ide 1 **
device ide 2:1
** Bad device ide 2 **
device ide 3:1
** Bad device ide 3 **
loading uImage ...
** Bad device usb 0 **
loading uInitrd ...
** Bad device usb 0 **
loading DTB /boot/dts/kirkwood-nsa325.dtb ...
** Bad device usb 0 **
Unknown command 'bootm0x800000' - try 'help'
resetting ...
�
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__| ** LOADER **
** MARVELL BOARD: Synology Disk Station LE
U-Boot 1.1.4 (May 22 2012 - 19:52:31) Marvell version: 3.5.9
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 0068B3D4
Soc: 88F6282 A1CPU running @ 1600Mhz L2 running @ 533Mhz
SysClock = 533Mhz , TClock = 200Mhz
DRAM (DDR3) CAS Latency = 7 tRP = 7 tRAS = 20 tRCD=7
DRAM CS[0] base 0x00000000 size 512MB
DRAM Total size 512MB 16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
Using default environment
[8192kB@f8000000] Flash: 8 MB
CPU : Marvell Feroceon (Rev 1)
Streaming disabled
Write allocate disabled
USB 0: host mode
PEX 0: PCI Express Root Complex Interface
PEX interface detected Link X1
PEX 1: interface detected no Link.
Synology Model: DS413j
Fan Status: Not Good
Fan 1: Not Good
Fan 2: Not Good
Net: egiga0 [PRIME], egiga1
Hit any key to stop autoboot: 0
## Booting image at f8090000 ...
Bad Magic Number
Marvell>>
|
Re: Install Debian on Synology DS413J March 10, 2023 01:48PM |
Admin Registered: 13 years ago Posts: 19,102 |
Billy,
Very good news that you can kwboot with NSA325 u-boot!
Now try with the Dreamplug u-boot. Dowload it from the relese thread:
https://forum.doozan.com/read.php?3,42359
And run kwboot with uboot.2017.07-tld-1.dreamplug.mtd0.kwb the same way you did with NSA325 u-boot.
======
Once you know you can kwboot with either u-boot, we are almost home free :) Let's see if the Dreamplug runs better.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/10/2023 01:50PM by bodhi.
Very good news that you can kwboot with NSA325 u-boot!
root@rasp2:~/tools# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p Sending boot message. Please reboot the target...\ Sending boot image... 0 % [......................................................................] 1 % [......................................................................] 97 % [......................................................................] 99 % [....................................] [Type Ctrl-\ + c to quit] U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:42:03 -0700) ZyXEL NSA325 2-Bay Power Media Server SoC: Kirkwood 88F6282_A1 DRAM: 512 MiB WARNING: Caches not enabled NAND: 0 MiB
Now try with the Dreamplug u-boot. Dowload it from the relese thread:
https://forum.doozan.com/read.php?3,42359
And run kwboot with uboot.2017.07-tld-1.dreamplug.mtd0.kwb the same way you did with NSA325 u-boot.
======
Once you know you can kwboot with either u-boot, we are almost home free :) Let's see if the Dreamplug runs better.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/10/2023 01:50PM by bodhi.
|
Re: Install Debian on Synology DS413J March 10, 2023 02:48PM |
Admin Registered: 13 years ago Posts: 19,102 |
USB and HDD spinup in either NSA325 or Dreamplug u-boot.
With both USB rootfs and HDD roots attached.
I hope to see at least USB works.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
With both USB rootfs and HDD roots attached.
mw.l 0xF1010100 0x40008000 mw.l 0xF1010140 0x00003AA4 sleep 10 usb start ide reset
I hope to see at least USB works.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Install Debian on Synology DS413J March 10, 2023 03:26PM |
Registered: 1 year ago Posts: 178 |
|
Re: Install Debian on Synology DS413J March 13, 2023 09:21AM |
Registered: 1 year ago Posts: 178 |
|
Re: Install Debian on Synology DS413J March 13, 2023 11:32AM |
Registered: 1 year ago Posts: 178 |
Bodhi,
> Dreamplug runs better.
i tried but not working :
> Dreamplug runs better.
i tried but not working :
root@Arc-170:~/tools# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.dreamplug.mtd0.kwb -p
Sending boot message. Please reboot the target...\
Sending boot image...
0 % [......................................................................]
1 % [......................................................................]
3 % [......................................................................]
5 % [......................................................................]
6 % [......................................................................]
8 % [......................................................................]
10 % [......................................................................]
11 % [......................................................................]
13 % [......................................................................]
15 % [......................................................................]
17 % [......................................................................]
18 % [......................................................................]
20 % [......................................................................]
22 % [......................................................................]
23 % [......................................................................]
25 % [......................................................................]
27 % [......................................................................]
29 % [......................................................................]
30 % [......................................................................]
32 % [......................................................................]
34 % [......................................................................]
35 % [......................................................................]
37 % [......................................................................]
39 % [......................................................................]
41 % [......................................................................]
42 % [......................................................................]
44 % [......................................................................]
46 % [......................................................................]
47 % [......................................................................]
49 % [......................................................................]
51 % [......................................................................]
53 % [......................................................................]
54 % [......................................................................]
56 % [......................................................................]
58 % [......................................................................]
59 % [......................................................................]
61 % [......................................................................]
63 % [......................................................................]
64 % [......................................................................]
66 % [......................................................................]
68 % [......................................................................]
70 % [......................................................................]
71 % [......................................................................]
73 % [......................................................................]
75 % [......................................................................]
76 % [......................................................................]
78 % [......................................................................]
80 % [......................................................................]
82 % [......................................................................]
83 % [......................................................................]
85 % [......................................................................]
87 % [......................................................................]
88 % [......................................................................]
90 % [......................................................................]
92 % [......................................................................]
94 % [......................................................................]
95 % [......................................................................]
97 % [......................................................................]
99 % [....................................]
[Type Ctrl-\ + c to quit]
▒
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__| ** LOADER **
** MARVELL BOARD: Synology Disk Station LE
U-Boot 1.1.4 (May 22 2012 - 19:52:31) Marvell version: 3.5.9
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 0068B3D4
Soc: 88F6282 A1CPU running @ 1600Mhz L2 running @ 533Mhz
SysClock = 533Mhz , TClock = 200Mhz
DRAM (DDR3) CAS Latency = 7 tRP = 7 tRAS = 20 tRCD=7
DRAM CS[0] base 0x00000000 size 512MB
DRAM Total size 512MB 16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
Using default environment
[8192kB@f8000000] Flash: 8 MB
CPU : Marvell Feroceon (Rev 1)
Streaming disabled
Write allocate disabled
USB 0: host mode
PEX 0: PCI Express Root Complex Interface
PEX interface detected Link X1
PEX 1: interface detected no Link.
Synology Model: DS413j
Fan Status: Not Good
Fan 1: Not Good
Fan 2: Not Good
Net: egiga0 [PRIME], egiga1
Hit any key to stop autoboot: 0
## Booting image at f8090000 ...
Bad Magic Number
Marvell>>
|
Re: Install Debian on Synology DS413J March 13, 2023 11:39AM |
Registered: 1 year ago Posts: 178 |
i retried the NSA325 :
root@Arc-170:~/tools# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p
Sending boot message. Please reboot the target.../
Sending boot image...
0 % [......................................................................]
1 % [......................................................................]
3 % [......................................................................]
5 % [......................................................................]
6 % [......................................................................]
8 % [......................................................................]
10 % [......................................................................]
11 % [......................................................................]
13 % [......................................................................]
15 % [......................................................................]
17 % [......................................................................]
18 % [......................................................................]
20 % [......................................................................]
22 % [......................................................................]
23 % [......................................................................]
25 % [......................................................................]
27 % [......................................................................]
29 % [......................................................................]
30 % [......................................................................]
32 % [......................................................................]
34 % [......................................................................]
35 % [......................................................................]
37 % [......................................................................]
39 % [......................................................................]
41 % [......................................................................]
42 % [......................................................................]
44 % [......................................................................]
46 % [......................................................................]
47 % [......................................................................]
49 % [......................................................................]
51 % [......................................................................]
53 % [......................................................................]
54 % [......................................................................]
56 % [......................................................................]
58 % [......................................................................]
59 % [......................................................................]
61 % [......................................................................]
63 % [......................................................................]
64 % [......................................................................]
66 % [......................................................................]
68 % [......................................................................]
70 % [......................................................................]
71 % [......................................................................]
73 % [......................................................................]
75 % [......................................................................]
76 % [......................................................................]
78 % [......................................................................]
80 % [......................................................................]
82 % [......................................................................]
83 % [......................................................................]
85 % [......................................................................]
87 % [......................................................................]
88 % [......................................................................]
90 % [......................................................................]
92 % [......................................................................]
94 % [......................................................................]
95 % [......................................................................]
97 % [......................................................................]
99 % [....................................]
[Type Ctrl-\ + c to quit]
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:42:03 -0700)
ZyXEL NSA325 2-Bay Power Media Server
SoC: Kirkwood 88F6282_A1
DRAM: 512 MiB
WARNING: Caches not enabled
NAND: 0 MiB
*** Warning - readenv() failed, using default environment
In: serial
Out: serial
Err: serial
Net: egiga0
MV88E1318 PHY initialized on egiga0
Hit any key to stop autoboot: 0
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
scanning usb for storage devices...
Use USB retry period from the environment: 15 second(s)
1 Storage Device(s) found
Reset IDE: ide_preinit failed
Partition Map for USB device 0 -- Partition Type: DOS
Part Start Sector Num Sectors UUID Type
1 21920 60729952 00000000-01 07
## Unknown partition table type 0
## Unknown partition table type 0
## Unknown partition table type 0
## Unknown partition table type 0
## Unknown partition table type 0
## Unknown partition table type 0
loading envs from usb 0 ...
** File not found /boot/uEnv.txt **
no IDE devices available
running scan_disk ...
Scan device usb
device usb 0:1
1 bytes read in 753 ms (0 Bytes/s)
Found bootable drive on usb 0
loading uImage ...
5457740 bytes read in 1053 ms (4.9 MiB/s)
loading uInitrd ...
9672316 bytes read in 1002 ms (9.2 MiB/s)
loading DTB /boot/dts/kirkwood-nsa325.dtb ...
14014 bytes read in 1676 ms (7.8 KiB/s)
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux-5.13.6-kirkwood-tld-1
Created: 2023-03-07 7:29:19 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 5457676 Bytes = 5.2 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
Image Name: initramfs-5.13.6-kirkwood-tld-1
Created: 2023-03-03 15:37:42 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 9672252 Bytes = 9.2 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 01c00000
Booting using the fdt blob at 0x1c00000
Loading Kernel Image ... OK
Loading Ramdisk to 1f1d4000, end 1fb0d63c ... OK
Loading Device Tree to 1f1cd000, end 1f1d36bd ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000][ T0] Booting Linux on physical CPU 0x0
[ 0.000000][ T0] Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021
[ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000][ T0] OF: fdt: Machine model: Synology DS413j
[ 0.000000][ T0] Memory policy: Data cache writeback
[ 0.000000][ T0] Zone ranges:
[ 0.000000][ T0] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000][ T0] Movable zone start for each node
[ 0.000000][ T0] Early memory node ranges
[ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000][ T0] Kernel command line: console=ttyS0,115200n8
[ 0.000000][ T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000][ T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000][ T0] Memory: 110504K/131072K available (11264K kernel code, 1553K rwdata, 4272K rodata, 1024K init, 309K bss, 20568K reserved, 0K cma-reserved)
[ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x408/0x7b4 with crng_init=0
[ 0.000000][ T0] trace event string verifier disabled
[ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000][ T0] Trampoline variant of Tasks RCU enabled.
[ 0.000000][ T0] Tracing variant of Tasks RCU enabled.
[ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000002][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.000049][ T0] Switching to timer-based delay loop, resolution 5ns
[ 0.000784][ T0] Console: colour dummy device 80x30
[ 0.000849][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[ 0.000885][ T0] pid_max: default: 32768 minimum: 301
[ 0.001214][ T0] LSM: Security Framework initializing
[ 0.001365][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001406][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.002615][ T0] CPU: Testing write buffer coherency: ok
[ 0.004663][ T1] Setting up static identity map for 0x100000 - 0x100058
[ 0.004947][ T1] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
[ 0.005236][ T1] rcu: Hierarchical SRCU implementation.
[ 0.006414][ T1] devtmpfs: initialized
[ 0.014686][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.014732][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.042898][ T1] prandom32: self test passed (less than 6 bits correlated)
[ 0.042936][ T1] prandom: seed boundary self test passed
[ 0.046095][ T1] prandom: 100 self tests passed
[ 0.046112][ T1] pinctrl core: initialized pinctrl subsystem
[ 0.047474][ T1] NET: Registered protocol family 16
[ 0.048011][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.048805][ T1] audit: initializing netlink subsys (disabled)
[ 0.050026][ T1] thermal_sys: Registered thermal governor 'step_wise'
[ 0.050425][ T16] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[ 0.050562][ T1] cpuidle: using governor ladder
[ 0.050648][ T1] cpuidle: using governor menu
[ 0.050998][ T1] Feroceon L2: Enabling L2
[ 0.051043][ T1] Feroceon L2: Cache support initialised.
[ 0.061254][ T1] No ATAGs?
[ 2.560054][ C0] random: fast init done
[ 3.709154][ T39] "cryptomgr_test" (39) uses obsolete ecb(arc4) skcipher
[ 3.729065][ T59] wait_for_initramfs() called before rootfs_initcalls
[ 3.910291][ T1] raid6: int32x8 gen() 150 MB/s
[ 4.080133][ T1] raid6: int32x8 xor() 91 MB/s
[ 4.250236][ T1] raid6: int32x4 gen() 146 MB/s
[ 4.420126][ T1] raid6: int32x4 xor() 95 MB/s
[ 4.590139][ T1] raid6: int32x2 gen() 188 MB/s
[ 4.760134][ T1] raid6: int32x2 xor() 113 MB/s
[ 4.930153][ T1] raid6: int32x1 gen() 130 MB/s
[ 5.100089][ T1] raid6: int32x1 xor() 77 MB/s
[ 5.100103][ T1] raid6: using algorithm int32x2 gen() 188 MB/s
[ 5.100114][ T1] raid6: .... xor() 113 MB/s, rmw enabled
[ 5.100124][ T1] raid6: using intx1 recovery algorithm
[ 5.100383][ T1] vgaarb: loaded
[ 5.100848][ T1] SCSI subsystem initialized
[ 5.101285][ T1] usbcore: registered new interface driver usbfs
[ 5.101345][ T1] usbcore: registered new interface driver hub
[ 5.101392][ T1] usbcore: registered new device driver usb
[ 5.101557][ T1] pps_core: LinuxPPS API ver. 1 registered
[ 5.101571][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 5.101597][ T1] PTP clock support registered
[ 5.103036][ T1] clocksource: Switched to clocksource orion_clocksource
[ 5.183595][ T1] VFS: Disk quotas dquot_6.6.0
[ 5.183688][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.198292][ T1] NET: Registered protocol family 2
[ 5.198440][ T1] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 5.199197][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 5.199242][ T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 5.199272][ T1] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 5.199298][ T1] TCP: Hash tables configured (established 1024 bind 1024)
[ 5.199495][ T1] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 5.199561][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.199596][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.199793][ T1] NET: Registered protocol family 1
[ 5.203503][ T1] RPC: Registered named UNIX socket transport module.
[ 5.203524][ T1] RPC: Registered udp transport module.
[ 5.203533][ T1] RPC: Registered tcp transport module.
[ 5.203542][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.203557][ T1] PCI: CLS 0 bytes, default 32
[ 5.203628][ T1] NetWinder Floating Point Emulator V0.97 (double precision)
[ 6.316573][ T1] Initialise system trusted keyrings
[ 6.316636][ T1] Key type blacklist registered
[ 6.316866][ T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 6.316970][ T1] zbud: loaded
[ 6.318192][ T1] NFS: Registering the id_resolver key type
[ 6.318230][ T1] Key type id_resolver registered
[ 6.318242][ T1] Key type id_legacy registered
[ 6.318281][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 6.318302][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 6.318315][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 6.318541][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 6.318925][ T1] fuse: init (API version 7.34)
[ 6.319259][ T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 6.319437][ T1] orangefs_init: module version upstream loaded
[ 6.319453][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
[ 6.395597][ T1] xor: measuring software checksum speed
[ 6.402257][ T1] arm4regs : 1485 MB/sec
[ 6.413380][ T1] 8regs : 890 MB/sec
[ 6.420983][ T1] 32regs : 1296 MB/sec
[ 6.420994][ T1] xor: using function: arm4regs (1485 MB/sec)
[ 6.421011][ T1] async_tx: api initialized (async)
[ 6.421027][ T1] Key type asymmetric registered
[ 6.421039][ T1] Asymmetric key parser 'x509' registered
[ 6.421089][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 6.421166][ T1] io scheduler bfq registered
[ 6.571047][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 6.572697][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: host bridge /mbus@f1000000/pcie@82000000 ranges:
[ 6.572769][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000
[ 6.572805][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1044000..0x00f1045fff -> 0x0000044000
[ 6.572839][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1080000..0x00f1081fff -> 0x0000080000
[ 6.572873][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 6.572905][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 6.572937][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 6.572962][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 6.573354][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[ 6.573374][ T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 6.573396][ T1] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff])
[ 6.573415][ T1] pci_bus 0000:00: root bus resource [mem 0xf1044000-0xf1045fff] (bus address [0x00044000-0x00045fff])
[ 6.573432][ T1] pci_bus 0000:00: root bus resource [mem 0xf1080000-0xf1081fff] (bus address [0x00080000-0x00081fff])
[ 6.573448][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 6.573463][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 6.573616][ T1] pci 0000:00:01.0: [11ab:6282] type 01 class 0x060400
[ 6.573649][ T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[ 6.573968][ T1] pci 0000:00:02.0: [11ab:6282] type 01 class 0x060400
[ 6.574002][ T1] pci 0000:00:02.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[ 6.575720][ T1] PCI: bus0: Fast back to back transfers disabled
[ 6.575750][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 6.575781][ T1] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 6.575983][ T1] pci 0000:01:00.0: [11ab:7042] type 00 class 0x010000
[ 6.576019][ T1] pci 0000:01:00.0: reg 0x10: [mem 0x14000000-0x140fffff 64bit]
[ 6.576043][ T1] pci 0000:01:00.0: reg 0x18: [io 0x0000-0x00ff]
[ 6.576173][ T1] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 8.000 Gb/s with 2.5 GT/s PCIe x4 link)
[ 6.576356][ T1] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 6.577968][ T1] PCI: bus1: Fast back to back transfers disabled
[ 6.577993][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 6.579722][ T1] PCI: bus2: Fast back to back transfers enabled
[ 6.579747][ T1] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 6.579921][ T1] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff]
[ 6.579945][ T1] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff]
[ 6.579964][ T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pref]
[ 6.579985][ T1] pci 0000:00:02.0: BAR 6: assigned [mem 0xe0200000-0xe02007ff pref]
[ 6.580007][ T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit]
[ 6.580033][ T1] pci 0000:01:00.0: BAR 2: assigned [io 0x10000-0x100ff]
[ 6.580053][ T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 6.580068][ T1] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff]
[ 6.580086][ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 6.580105][ T1] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 6.580209][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0143)
[ 6.580771][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
[ 6.643905][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 6.645974][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
[ 6.703906][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 6.706233][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 6.707451][ T1] printk: console [ttyS0] disabled
[ 6.707534][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A
[ 7.887889][ T1] printk: console [ttyS0] enabled
[ 7.893496][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 12500000) is a 16550A
[ 7.910301][ T1] loop: module loaded
[ 7.914626][ T1] sata_mv 0000:01:00.0: enabling device (0140 -> 0143)
[ 7.921504][ T1] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
[ 7.935738][ T1] scsi host0: sata_mv
[ 7.940138][ T1] scsi host1: sata_mv
[ 7.944540][ T1] scsi host2: sata_mv
[ 7.948874][ T1] scsi host3: sata_mv
[ 7.952930][ T1] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 37
[ 7.961370][ T1] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 37
[ 7.969781][ T1] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 37
[ 7.978194][ T1] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 37
[ 7.987964][ T1] sata_mv f1080000.sata: slots 32 ports 2
[ 7.996874][ T1] scsi host4: sata_mv
[ 8.001259][ T1] scsi host5: sata_mv
[ 8.005382][ T1] ata5: SATA max UDMA/133 irq 34
[ 8.010208][ T1] ata6: SATA max UDMA/133 irq 34
[ 8.016687][ T1] spi-nor spi0.0: found n25q064, expected m25p80
[ 8.023224][ T1] spi-nor spi0.0: n25q064 (8192 Kbytes)
[ 8.028705][ T1] 6 fixed-partitions partitions found on MTD device spi0.0
[ 8.035811][ T1] Creating 6 MTD partitions on "spi0.0":
[ 8.041342][ T1] 0x000000000000-0x000000080000 : "RedBoot"
[ 8.048417][ T1] 0x000000080000-0x000000280000 : "zImage"
[ 8.055334][ T1] 0x000000280000-0x0000003c0000 : "rd.gz"
[ 8.062125][ T1] 0x0000003c0000-0x0000003d0000 : "vendor"
[ 8.069038][ T1] 0x0000003d0000-0x0000003f0000 : "RedBoot config"
[ 8.076625][ T1] 0x0000003f0000-0x000000400000 : "FIS directory"
[ 8.084666][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 8.093276][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 8.104563][ T1] libphy: Fixed MDIO Bus: probed
[ 8.110580][ T1] libphy: orion_mdio_bus: probed
[ 8.115632][ T1] mdio_bus f1072004.mdio-bus-mii: MDIO device at address 8 is missing.
[ 8.125210][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 8.134765][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 52:3b:20:9c:11:51
[ 8.144430][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.151715][ T1] ehci-pci: EHCI PCI platform driver
[ 8.157007][ T1] ehci-orion: EHCI orion driver
[ 8.161901][ T1] orion-ehci f1050000.ehci: EHCI Host Controller
[ 8.168187][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 8.176783][ T1] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000
[ 8.213074][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 8.220075][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[ 8.229119][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.237124][ T1] usb usb1: Product: EHCI Host Controller
[ 8.242758][ T1] usb usb1: Manufacturer: Linux 5.13.6-kirkwood-tld-1 ehci_hcd
[ 8.250229][ T1] usb usb1: SerialNumber: f1050000.ehci
[ 8.256261][ T1] hub 1-0:1.0: USB hub found
[ 8.260807][ T1] hub 1-0:1.0: 1 port detected
[ 8.266220][ T1] usbcore: registered new interface driver usb-storage
[ 8.273363][ T1] mousedev: PS/2 mouse device common for all mice
[ 8.279955][ T1] i2c /dev entries driver
[ 8.285816][ T1] rtc-s35390a 0-0030: error resetting chip
[ 8.292062][ T1] rtc-s35390a: probe of 0-0030 failed with error -5
[ 8.299338][ T1] device-mapper: uevent: version 1.0.3
[ 8.305006][ T1] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 8.314602][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 8.321907][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 8.329318][ T94] ata1: SATA link down (SStatus 0 SControl 300)
[ 8.335507][ T1] device-mapper: multipath service-time: version 0.3.0 loaded
[ 8.342976][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[ 8.349842][ T104] ata5: SATA link down (SStatus 0 SControl F300)
[ 8.356623][ T1] device-mapper: raid: Loading target version 1.15.1
[ 8.365411][ T1] hid: raw HID events driver (C) Jiri Kosina
[ 8.371627][ T1] drop_monitor: Initializing network drop monitor service
[ 8.379074][ T1] NET: Registered protocol family 10
[ 8.385413][ T1] Segment Routing with IPv6
[ 8.389798][ T1] RPL Segment Routing with IPv6
[ 8.394670][ T1] NET: Registered protocol family 17
[ 8.400035][ T1] Key type dns_resolver registered
[ 8.405593][ T1] registered taskstats version 1
[ 8.410416][ T1] Loading compiled-in X.509 certificates
[ 8.416306][ T1] zswap: loaded using pool lzo/zbud
[ 8.421681][ T1] Key type ._fscrypt registered
[ 8.426482][ T1] Key type .fscrypt registered
[ 8.431122][ T1] Key type fscrypt-provisioning registered
[ 8.438381][ T1] Key type big_key registered
[ 8.446151][ T1] Key type encrypted registered
[ 8.553063][ T117] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 8.694595][ T96] ata2: SATA link down (SStatus 0 SControl 300)
[ 8.754790][ T117] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.32
[ 8.763737][ T117] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 8.771623][ T117] usb 1-1: Product: USB2.0 Hub
[ 8.777096][ T117] hub 1-1:1.0: USB hub found
[ 8.781919][ T117] hub 1-1:1.0: 4 ports detected
[ 9.034602][ T98] ata3: SATA link down (SStatus 0 SControl 300)
[ 9.374570][ T100] ata4: SATA link down (SStatus 0 SControl 300)
[ 9.503057][ T117] usb 1-1.2: new high-speed USB device number 3 using orion-ehci
[ 9.654289][ T117] usb 1-1.2: New USB device found, idVendor=0781, idProduct=5590, bcdDevice= 1.00
[ 9.663430][ T117] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.671508][ T117] usb 1-1.2: Product: Ultra
[ 9.675901][ T117] usb 1-1.2: Manufacturer: SanDisk
[ 9.680911][ T117] usb 1-1.2: SerialNumber: 4C530001230325109084
[ 9.687829][ T117] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 9.695381][ T117] scsi host6: usb-storage 1-1.2:1.0
[ 9.715725][ T106] ata6: SATA link down (SStatus 0 SControl F300)
[ 9.732075][ T1] md: Waiting for all devices to be available before autodetect
[ 9.739622][ T1] md: If you don't use raid, use raid=noautodetect
[ 9.746019][ T1] md: Autodetecting RAID arrays.
[ 9.750833][ T1] md: autorun ...
[ 9.754351][ T1] md: ... autorun DONE.
[ 9.758994][ T1] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[ 9.767282][ T1] Please append a correct "root=" boot option; here are the available partitions:
[ 9.776448][ T1] 1f00 512 mtdblock0
[ 9.776457][ T1] (driver?)
[ 9.784468][ T1] 1f01 2048 mtdblock1
[ 9.784477][ T1] (driver?)
[ 9.792439][ T1] 1f02 1280 mtdblock2
[ 9.792446][ T1] (driver?)
[ 9.800445][ T1] 1f03 64 mtdblock3
[ 9.800453][ T1] (driver?)
[ 9.808456][ T1] 1f04 128 mtdblock4
[ 9.808465][ T1] (driver?)
[ 9.816468][ T1] 1f05 64 mtdblock5
[ 9.816476][ T1] (driver?)
[ 9.824468][ T1] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 9.833474][ T1] CPU: 0 PID: 1 Comm: swapper Not tainted 5.13.6-kirkwood-tld-1 #1.0
[ 9.841433][ T1] Hardware name: Marvell Kirkwood (Flattened Device Tree)
[ 9.848434][ T1] [<8010e0a4>] (unwind_backtrace) from [<8010a8ac>] (show_stack+0x10/0x14)
[ 9.856931][ T1] [<8010a8ac>] (show_stack) from [<80afddf4>] (panic+0xfc/0x328)
[ 9.864552][ T1] [<80afddf4>] (panic) from [<81101ad0>] (mount_block_root+0x1e0/0x26c)
[ 9.872783][ T1] [<81101ad0>] (mount_block_root) from [<81101c4c>] (mount_root+0xf0/0x120)
[ 9.881353][ T1] [<81101c4c>] (mount_root) from [<81101dc0>] (prepare_namespace+0x144/0x180)
[ 9.890100][ T1] [<81101dc0>] (prepare_namespace) from [<811015e4>] (kernel_init_freeable+0x1d0/0x234)
[ 9.899718][ T1] [<811015e4>] (kernel_init_freeable) from [<80b091cc>] (kernel_init+0x8/0x118)
[ 9.908647][ T1] [<80b091cc>] (kernel_init) from [<80100148>] (ret_from_fork+0x14/0x2c)
[ 9.916956][ T1] Exception stack(0x814a5fb0 to 0x814a5ff8)
[ 9.922731][ T1] 5fa0: 00000000 00000000 00000000 00000000
[ 9.931644][ T1] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.940555][ T1] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 9.947907][ T1] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
|
Re: Install Debian on Synology DS413J March 13, 2023 02:24PM |
Admin Registered: 13 years ago Posts: 19,102 |
Billy,
That's very good news in NSA325 u-boot, that it can load the kernel from the USB rootfs. But the GPIOs also need to be set correctly.
With USB rootfs attached, and at least 1 HDD attached. kwboot the NSA325 u-boot, and
And then boot
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/13/2023 03:58PM by bodhi.
That's very good news in NSA325 u-boot, that it can load the kernel from the USB rootfs. But the GPIOs also need to be set correctly.
With USB rootfs attached, and at least 1 HDD attached. kwboot the NSA325 u-boot, and
mw.l 0xF1010100 0x40008000 mw.l 0xF1010140 0x00003AA4 sleep 10 usb start ide reset
And then boot
boot
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/13/2023 03:58PM by bodhi.
|
Re: Install Debian on Synology DS413J March 13, 2023 05:12PM |
Registered: 1 year ago Posts: 178 |
|
Re: Install Debian on Synology DS413J March 14, 2023 02:45AM |
Registered: 1 year ago Posts: 178 |
ide reset failed but usb start detected my usb key... but no boot :
root@Arc-170:~/tools# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p
Sending boot message. Please reboot the target...|
Sending boot image...
0 % [......................................................................]
1 % [......................................................................]
3 % [......................................................................]
5 % [......................................................................]
6 % [......................................................................]
8 % [......................................................................]
10 % [......................................................................]
11 % [......................................................................]
13 % [......................................................................]
15 % [......................................................................]
17 % [......................................................................]
18 % [......................................................................]
20 % [......................................................................]
22 % [......................................................................]
23 % [......................................................................]
25 % [......................................................................]
27 % [......................................................................]
29 % [......................................................................]
30 % [......................................................................]
32 % [......................................................................]
34 % [......................................................................]
35 % [......................................................................]
37 % [......................................................................]
39 % [......................................................................]
41 % [......................................................................]
42 % [......................................................................]
44 % [......................................................................]
46 % [......................................................................]
47 % [......................................................................]
49 % [......................................................................]
51 % [......................................................................]
53 % [......................................................................]
54 % [......................................................................]
56 % [......................................................................]
58 % [......................................................................]
59 % [......................................................................]
61 % [......................................................................]
63 % [......................................................................]
64 % [......................................................................]
66 % [......................................................................]
68 % [......................................................................]
70 % [......................................................................]
71 % [......................................................................]
73 % [......................................................................]
75 % [......................................................................]
76 % [......................................................................]
78 % [......................................................................]
80 % [......................................................................]
82 % [......................................................................]
83 % [......................................................................]
85 % [......................................................................]
87 % [......................................................................]
88 % [......................................................................]
90 % [......................................................................]
92 % [......................................................................]
94 % [......................................................................]
95 % [......................................................................]
97 % [......................................................................]
99 % [....................................]
[Type Ctrl-\ + c to quit]
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:42:03 -0700)
ZyXEL NSA325 2-Bay Power Media Server
SoC: Kirkwood 88F6282_A1
DRAM: 512 MiB
WARNING: Caches not enabled
NAND: 0 MiB
*** Warning - readenv() failed, using default environment
In: serial
Out: serial
Err: serial
Net: egiga0
MV88E1318 PHY initialized on egiga0
Hit any key to stop autoboot: 0
NSA325> mw.l 0xF1010100 0x40008000
NSA325> mw.l 0xF1010140 0x00003AA4
NSA325> sleep 10
NSA325> usb start
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
scanning usb for storage devices...
Use USB retry period from the environment: 15 second(s)
1 Storage Device(s) found
NSA325> ide reset
Reset IDE: ide_preinit failed
NSA325> ide reset
Reset IDE: ide_preinit failed
NSA325> help ide
ide - IDE sub-system
Usage:
ide reset - reset IDE controller
ide info - show available IDE devices
ide device [dev] - show or set current device
ide part [dev] - print partition table of one or all IDE devices
ide read addr blk# cnt
ide write addr blk# cnt - read/write `cnt' blocks starting at block `blk#'
to/from memory address `addr'
NSA325> ide info
Device 0: device type unknown
Device 1: device type unknown
NSA325> ide info 0
ide - IDE sub-system
Usage:
ide reset - reset IDE controller
ide info - show available IDE devices
ide device [dev] - show or set current device
ide part [dev] - print partition table of one or all IDE devices
ide read addr blk# cnt
ide write addr blk# cnt - read/write `cnt' blocks starting at block `blk#'
to/from memory address `addr'
NSA325> boot
Reset IDE: ide_preinit failed
Partition Map for USB device 0 -- Partition Type: DOS
Part Start Sector Num Sectors UUID Type
1 21920 60729952 00000000-01 07
## Unknown partition table type 0
## Unknown partition table type 0
## Unknown partition table type 0
## Unknown partition table type 0
## Unknown partition table type 0
## Unknown partition table type 0
loading envs from usb 0 ...
** File not found /boot/uEnv.txt **
no IDE devices available
running scan_disk ...
Scan device usb
device usb 0:1
1 bytes read in 754 ms (0 Bytes/s)
Found bootable drive on usb 0
loading uImage ...
5457740 bytes read in 1054 ms (4.9 MiB/s)
loading uInitrd ...
9672316 bytes read in 1003 ms (9.2 MiB/s)
loading DTB /boot/dts/kirkwood-nsa325.dtb ...
14014 bytes read in 1676 ms (7.8 KiB/s)
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux-5.13.6-kirkwood-tld-1
Created: 2023-03-07 7:29:19 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 5457676 Bytes = 5.2 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
Image Name: initramfs-5.13.6-kirkwood-tld-1
Created: 2023-03-03 15:37:42 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 9672252 Bytes = 9.2 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 01c00000
Booting using the fdt blob at 0x1c00000
Loading Kernel Image ... OK
Loading Ramdisk to 1f1d4000, end 1fb0d63c ... OK
Loading Device Tree to 1f1cd000, end 1f1d36bd ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000][ T0] Booting Linux on physical CPU 0x0
[ 0.000000][ T0] Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021
[ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000][ T0] OF: fdt: Machine model: Synology DS413j
[ 0.000000][ T0] Memory policy: Data cache writeback
[ 0.000000][ T0] Zone ranges:
[ 0.000000][ T0] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000][ T0] Movable zone start for each node
[ 0.000000][ T0] Early memory node ranges
[ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000][ T0] Kernel command line: console=ttyS0,115200n8
[ 0.000000][ T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000][ T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000][ T0] Memory: 110504K/131072K available (11264K kernel code, 1553K rwdata, 4272K rodata, 1024K init, 309K bss, 20568K reserved, 0K cma-reserved)
[ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x408/0x7b4 with crng_init=0
[ 0.000000][ T0] trace event string verifier disabled
[ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000][ T0] Trampoline variant of Tasks RCU enabled.
[ 0.000000][ T0] Tracing variant of Tasks RCU enabled.
[ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000002][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.000049][ T0] Switching to timer-based delay loop, resolution 5ns
[ 0.000784][ T0] Console: colour dummy device 80x30
[ 0.000849][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[ 0.000885][ T0] pid_max: default: 32768 minimum: 301
[ 0.001214][ T0] LSM: Security Framework initializing
[ 0.001365][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001406][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.002615][ T0] CPU: Testing write buffer coherency: ok
[ 0.004663][ T1] Setting up static identity map for 0x100000 - 0x100058
[ 0.004947][ T1] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
[ 0.005235][ T1] rcu: Hierarchical SRCU implementation.
[ 0.006414][ T1] devtmpfs: initialized
[ 0.014661][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.014709][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.042877][ T1] prandom32: self test passed (less than 6 bits correlated)
[ 0.042916][ T1] prandom: seed boundary self test passed
[ 0.046074][ T1] prandom: 100 self tests passed
[ 0.046089][ T1] pinctrl core: initialized pinctrl subsystem
[ 0.047452][ T1] NET: Registered protocol family 16
[ 0.047989][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.048787][ T1] audit: initializing netlink subsys (disabled)
[ 0.050002][ T1] thermal_sys: Registered thermal governor 'step_wise'
[ 0.050397][ T16] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[ 0.050534][ T1] cpuidle: using governor ladder
[ 0.050619][ T1] cpuidle: using governor menu
[ 0.050969][ T1] Feroceon L2: Enabling L2
[ 0.051014][ T1] Feroceon L2: Cache support initialised.
[ 0.061218][ T1] No ATAGs?
[ 2.560054][ C0] random: fast init done
[ 3.709116][ T39] "cryptomgr_test" (39) uses obsolete ecb(arc4) skcipher
[ 3.729036][ T59] wait_for_initramfs() called before rootfs_initcalls
[ 3.910176][ T1] raid6: int32x8 gen() 150 MB/s
[ 4.080150][ T1] raid6: int32x8 xor() 91 MB/s
[ 4.250193][ T1] raid6: int32x4 gen() 146 MB/s
[ 4.420165][ T1] raid6: int32x4 xor() 95 MB/s
[ 4.590176][ T1] raid6: int32x2 gen() 187 MB/s
[ 4.760144][ T1] raid6: int32x2 xor() 113 MB/s
[ 4.930206][ T1] raid6: int32x1 gen() 131 MB/s
[ 5.100186][ T1] raid6: int32x1 xor() 79 MB/s
[ 5.100200][ T1] raid6: using algorithm int32x2 gen() 187 MB/s
[ 5.100211][ T1] raid6: .... xor() 113 MB/s, rmw enabled
[ 5.100220][ T1] raid6: using intx1 recovery algorithm
[ 5.100478][ T1] vgaarb: loaded
[ 5.100942][ T1] SCSI subsystem initialized
[ 5.101376][ T1] usbcore: registered new interface driver usbfs
[ 5.101434][ T1] usbcore: registered new interface driver hub
[ 5.101480][ T1] usbcore: registered new device driver usb
[ 5.101644][ T1] pps_core: LinuxPPS API ver. 1 registered
[ 5.101658][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 5.101686][ T1] PTP clock support registered
[ 5.103124][ T1] clocksource: Switched to clocksource orion_clocksource
[ 5.183682][ T1] VFS: Disk quotas dquot_6.6.0
[ 5.183779][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.198489][ T1] NET: Registered protocol family 2
[ 5.198638][ T1] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 5.199392][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 5.199438][ T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 5.199467][ T1] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 5.199493][ T1] TCP: Hash tables configured (established 1024 bind 1024)
[ 5.199690][ T1] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 5.199755][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.199790][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.199984][ T1] NET: Registered protocol family 1
[ 5.213581][ T1] RPC: Registered named UNIX socket transport module.
[ 5.213602][ T1] RPC: Registered udp transport module.
[ 5.213612][ T1] RPC: Registered tcp transport module.
[ 5.213621][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.213636][ T1] PCI: CLS 0 bytes, default 32
[ 5.213707][ T1] NetWinder Floating Point Emulator V0.97 (double precision)
[ 6.316680][ T1] Initialise system trusted keyrings
[ 6.316750][ T1] Key type blacklist registered
[ 6.316982][ T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 6.317086][ T1] zbud: loaded
[ 6.318310][ T1] NFS: Registering the id_resolver key type
[ 6.318349][ T1] Key type id_resolver registered
[ 6.318362][ T1] Key type id_legacy registered
[ 6.318400][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 6.318422][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 6.318435][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 6.318659][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 6.319046][ T1] fuse: init (API version 7.34)
[ 6.319384][ T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 6.319561][ T1] orangefs_init: module version upstream loaded
[ 6.319577][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
[ 6.392929][ T1] xor: measuring software checksum speed
[ 6.399614][ T1] arm4regs : 1485 MB/sec
[ 6.410716][ T1] 8regs : 890 MB/sec
[ 6.418338][ T1] 32regs : 1296 MB/sec
[ 6.418352][ T1] xor: using function: arm4regs (1485 MB/sec)
[ 6.418371][ T1] async_tx: api initialized (async)
[ 6.418387][ T1] Key type asymmetric registered
[ 6.418398][ T1] Asymmetric key parser 'x509' registered
[ 6.418449][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 6.418525][ T1] io scheduler bfq registered
[ 6.568368][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 6.570014][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: host bridge /mbus@f1000000/pcie@82000000 ranges:
[ 6.570086][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000
[ 6.570122][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1044000..0x00f1045fff -> 0x0000044000
[ 6.570156][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1080000..0x00f1081fff -> 0x0000080000
[ 6.570190][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 6.570222][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 6.570254][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 6.570279][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 6.570620][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[ 6.570640][ T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 6.570663][ T1] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff])
[ 6.570681][ T1] pci_bus 0000:00: root bus resource [mem 0xf1044000-0xf1045fff] (bus address [0x00044000-0x00045fff])
[ 6.570699][ T1] pci_bus 0000:00: root bus resource [mem 0xf1080000-0xf1081fff] (bus address [0x00080000-0x00081fff])
[ 6.570715][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 6.570730][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 6.570882][ T1] pci 0000:00:01.0: [11ab:6282] type 01 class 0x060400
[ 6.570915][ T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[ 6.571232][ T1] pci 0000:00:02.0: [11ab:6282] type 01 class 0x060400
[ 6.571264][ T1] pci 0000:00:02.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[ 6.572987][ T1] PCI: bus0: Fast back to back transfers disabled
[ 6.573017][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 6.573047][ T1] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 6.573302][ T1] pci 0000:01:00.0: [11ab:7042] type 00 class 0x010000
[ 6.573339][ T1] pci 0000:01:00.0: reg 0x10: [mem 0x14000000-0x140fffff 64bit]
[ 6.573363][ T1] pci 0000:01:00.0: reg 0x18: [io 0x0000-0x00ff]
[ 6.573493][ T1] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 8.000 Gb/s with 2.5 GT/s PCIe x4 link)
[ 6.573679][ T1] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 6.575297][ T1] PCI: bus1: Fast back to back transfers disabled
[ 6.575323][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 6.577056][ T1] PCI: bus2: Fast back to back transfers enabled
[ 6.577080][ T1] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 6.577253][ T1] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff]
[ 6.577276][ T1] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff]
[ 6.577295][ T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pref]
[ 6.577316][ T1] pci 0000:00:02.0: BAR 6: assigned [mem 0xe0200000-0xe02007ff pref]
[ 6.577338][ T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit]
[ 6.577364][ T1] pci 0000:01:00.0: BAR 2: assigned [io 0x10000-0x100ff]
[ 6.577385][ T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 6.577400][ T1] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff]
[ 6.577418][ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 6.577437][ T1] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 6.577541][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0143)
[ 6.578103][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
[ 6.633989][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 6.636058][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
[ 6.693989][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 6.696320][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 6.697544][ T1] printk: console [ttyS0] disabled
[ 6.697627][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A
[ 7.877995][ T1] printk: console [ttyS0] enabled
[ 7.883603][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 12500000) is a 16550A
[ 7.900387][ T1] loop: module loaded
[ 7.904714][ T1] sata_mv 0000:01:00.0: enabling device (0140 -> 0143)
[ 7.911592][ T1] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
[ 7.925821][ T1] scsi host0: sata_mv
[ 7.930228][ T1] scsi host1: sata_mv
[ 7.934628][ T1] scsi host2: sata_mv
[ 7.938967][ T1] scsi host3: sata_mv
[ 7.943017][ T1] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 37
[ 7.951459][ T1] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 37
[ 7.959870][ T1] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 37
[ 7.968281][ T1] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 37
[ 7.978053][ T1] sata_mv f1080000.sata: slots 32 ports 2
[ 7.986958][ T1] scsi host4: sata_mv
[ 7.991338][ T1] scsi host5: sata_mv
[ 7.995452][ T1] ata5: SATA max UDMA/133 irq 34
[ 8.000270][ T1] ata6: SATA max UDMA/133 irq 34
[ 8.006751][ T1] spi-nor spi0.0: found n25q064, expected m25p80
[ 8.013285][ T1] spi-nor spi0.0: n25q064 (8192 Kbytes)
[ 8.018767][ T1] 6 fixed-partitions partitions found on MTD device spi0.0
[ 8.025874][ T1] Creating 6 MTD partitions on "spi0.0":
[ 8.031403][ T1] 0x000000000000-0x000000080000 : "RedBoot"
[ 8.038484][ T1] 0x000000080000-0x000000280000 : "zImage"
[ 8.045414][ T1] 0x000000280000-0x0000003c0000 : "rd.gz"
[ 8.052203][ T1] 0x0000003c0000-0x0000003d0000 : "vendor"
[ 8.059106][ T1] 0x0000003d0000-0x0000003f0000 : "RedBoot config"
[ 8.066690][ T1] 0x0000003f0000-0x000000400000 : "FIS directory"
[ 8.074604][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 8.083304][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 8.094606][ T1] libphy: Fixed MDIO Bus: probed
[ 8.100637][ T1] libphy: orion_mdio_bus: probed
[ 8.105694][ T1] mdio_bus f1072004.mdio-bus-mii: MDIO device at address 8 is missing.
[ 8.115275][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 8.124786][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 52:3b:20:9c:11:51
[ 8.134447][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.141732][ T1] ehci-pci: EHCI PCI platform driver
[ 8.147025][ T1] ehci-orion: EHCI orion driver
[ 8.151920][ T1] orion-ehci f1050000.ehci: EHCI Host Controller
[ 8.158207][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 8.166801][ T1] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000
[ 8.203162][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 8.210165][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[ 8.219215][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.227221][ T1] usb usb1: Product: EHCI Host Controller
[ 8.232854][ T1] usb usb1: Manufacturer: Linux 5.13.6-kirkwood-tld-1 ehci_hcd
[ 8.240326][ T1] usb usb1: SerialNumber: f1050000.ehci
[ 8.246356][ T1] hub 1-0:1.0: USB hub found
[ 8.250902][ T1] hub 1-0:1.0: 1 port detected
[ 8.256316][ T1] usbcore: registered new interface driver usb-storage
[ 8.263461][ T1] mousedev: PS/2 mouse device common for all mice
[ 8.270053][ T1] i2c /dev entries driver
[ 8.275909][ T1] rtc-s35390a 0-0030: error resetting chip
[ 8.282157][ T1] rtc-s35390a: probe of 0-0030 failed with error -5
[ 8.289428][ T1] device-mapper: uevent: version 1.0.3
[ 8.295095][ T1] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 8.304689][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 8.311994][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 8.319405][ T94] ata1: SATA link down (SStatus 0 SControl 300)
[ 8.325578][ T1] device-mapper: multipath service-time: version 0.3.0 loaded
[ 8.333044][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[ 8.339917][ T104] ata5: SATA link down (SStatus 0 SControl F300)
[ 8.346709][ T1] device-mapper: raid: Loading target version 1.15.1
[ 8.355513][ T1] hid: raw HID events driver (C) Jiri Kosina
[ 8.361734][ T1] drop_monitor: Initializing network drop monitor service
[ 8.369182][ T1] NET: Registered protocol family 10
[ 8.375513][ T1] Segment Routing with IPv6
[ 8.379903][ T1] RPL Segment Routing with IPv6
[ 8.384778][ T1] NET: Registered protocol family 17
[ 8.390143][ T1] Key type dns_resolver registered
[ 8.395699][ T1] registered taskstats version 1
[ 8.400522][ T1] Loading compiled-in X.509 certificates
[ 8.406413][ T1] zswap: loaded using pool lzo/zbud
[ 8.411782][ T1] Key type ._fscrypt registered
[ 8.416589][ T1] Key type .fscrypt registered
[ 8.421227][ T1] Key type fscrypt-provisioning registered
[ 8.428494][ T1] Key type big_key registered
[ 8.436247][ T1] Key type encrypted registered
[ 8.543150][ T117] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 8.684679][ T96] ata2: SATA link down (SStatus 0 SControl 300)
[ 8.744934][ T117] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.32
[ 8.753885][ T117] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 8.761767][ T117] usb 1-1: Product: USB2.0 Hub
[ 8.767240][ T117] hub 1-1:1.0: USB hub found
[ 8.772062][ T117] hub 1-1:1.0: 4 ports detected
[ 9.024692][ T98] ata3: SATA link down (SStatus 0 SControl 300)
[ 9.364695][ T100] ata4: SATA link down (SStatus 0 SControl 300)
[ 9.493145][ T117] usb 1-1.2: new high-speed USB device number 3 using orion-ehci
[ 9.644307][ T117] usb 1-1.2: New USB device found, idVendor=0781, idProduct=5590, bcdDevice= 1.00
[ 9.653448][ T117] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.661526][ T117] usb 1-1.2: Product: Ultra
[ 9.665920][ T117] usb 1-1.2: Manufacturer: SanDisk
[ 9.670930][ T117] usb 1-1.2: SerialNumber: 4C530001230325109084
[ 9.677848][ T117] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 9.685399][ T117] scsi host6: usb-storage 1-1.2:1.0
[ 9.705741][ T106] ata6: SATA link down (SStatus 0 SControl F300)
[ 9.722094][ T1] md: Waiting for all devices to be available before autodetect
[ 9.729641][ T1] md: If you don't use raid, use raid=noautodetect
[ 9.736045][ T1] md: Autodetecting RAID arrays.
[ 9.740859][ T1] md: autorun ...
[ 9.744379][ T1] md: ... autorun DONE.
[ 9.749036][ T1] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[ 9.757327][ T1] Please append a correct "root=" boot option; here are the available partitions:
[ 9.766494][ T1] 1f00 512 mtdblock0
[ 9.766503][ T1] (driver?)
[ 9.774522][ T1] 1f01 2048 mtdblock1
[ 9.774530][ T1] (driver?)
[ 9.782492][ T1] 1f02 1280 mtdblock2
[ 9.782498][ T1] (driver?)
[ 9.790499][ T1] 1f03 64 mtdblock3
[ 9.790506][ T1] (driver?)
[ 9.798509][ T1] 1f04 128 mtdblock4
[ 9.798517][ T1] (driver?)
[ 9.806521][ T1] 1f05 64 mtdblock5
[ 9.806529][ T1] (driver?)
[ 9.814522][ T1] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 9.823527][ T1] CPU: 0 PID: 1 Comm: swapper Not tainted 5.13.6-kirkwood-tld-1 #1.0
[ 9.831486][ T1] Hardware name: Marvell Kirkwood (Flattened Device Tree)
[ 9.838487][ T1] [<8010e0a4>] (unwind_backtrace) from [<8010a8ac>] (show_stack+0x10/0x14)
[ 9.846984][ T1] [<8010a8ac>] (show_stack) from [<80afddf4>] (panic+0xfc/0x328)
[ 9.854605][ T1] [<80afddf4>] (panic) from [<81101ad0>] (mount_block_root+0x1e0/0x26c)
[ 9.862836][ T1] [<81101ad0>] (mount_block_root) from [<81101c4c>] (mount_root+0xf0/0x120)
[ 9.871406][ T1] [<81101c4c>] (mount_root) from [<81101dc0>] (prepare_namespace+0x144/0x180)
[ 9.880153][ T1] [<81101dc0>] (prepare_namespace) from [<811015e4>] (kernel_init_freeable+0x1d0/0x234)
[ 9.889771][ T1] [<811015e4>] (kernel_init_freeable) from [<80b091cc>] (kernel_init+0x8/0x118)
[ 9.898692][ T1] [<80b091cc>] (kernel_init) from [<80100148>] (ret_from_fork+0x14/0x2c)
[ 9.907001][ T1] Exception stack(0x814a5fb0 to 0x814a5ff8)
[ 9.912776][ T1] 5fa0: 00000000 00000000 00000000 00000000
[ 9.921689][ T1] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.930600][ T1] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 9.937952][ T1] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
|
Re: Install Debian on Synology DS413J March 15, 2023 07:38AM |
Registered: 1 year ago Posts: 178 |
I can boot with the new u-boot if i do commands with tftp etc...
root@Arc-170:~/tools# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p
Sending boot message. Please reboot the target.../
Sending boot image...
0 % [......................................................................]
1 % [......................................................................]
3 % [......................................................................]
5 % [......................................................................]
6 % [......................................................................]
8 % [......................................................................]
10 % [......................................................................]
11 % [......................................................................]
13 % [......................................................................]
15 % [......................................................................]
17 % [......................................................................]
18 % [......................................................................]
20 % [......................................................................]
22 % [......................................................................]
23 % [......................................................................]
25 % [......................................................................]
27 % [......................................................................]
29 % [......................................................................]
30 % [......................................................................]
32 % [......................................................................]
34 % [......................................................................]
35 % [......................................................................]
37 % [......................................................................]
39 % [......................................................................]
41 % [......................................................................]
42 % [......................................................................]
44 % [......................................................................]
46 % [......................................................................]
47 % [......................................................................]
49 % [......................................................................]
51 % [......................................................................]
53 % [......................................................................]
54 % [......................................................................]
56 % [......................................................................]
58 % [......................................................................]
59 % [......................................................................]
61 % [......................................................................]
63 % [......................................................................]
64 % [......................................................................]
66 % [......................................................................]
68 % [......................................................................]
70 % [......................................................................]
71 % [......................................................................]
73 % [......................................................................]
75 % [......................................................................]
76 % [......................................................................]
78 % [......................................................................]
80 % [......................................................................]
82 % [......................................................................]
83 % [......................................................................]
85 % [......................................................................]
87 % [......................................................................]
88 % [......................................................................]
90 % [......................................................................]
92 % [......................................................................]
94 % [......................................................................]
95 % [......................................................................]
97 % [......................................................................]
99 % [....................................]
[Type Ctrl-\ + c to quit]
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:42:03 -0700)
ZyXEL NSA325 2-Bay Power Media Server
SoC: Kirkwood 88F6282_A1
DRAM: 512 MiB
WARNING: Caches not enabled
NAND: 0 MiB
*** Warning - readenv() failed, using default environment
In: serial
Out: serial
Err: serial
Net: egiga0
MV88E1318 PHY initialized on egiga0
Hit any key to stop autoboot: 0
NSA325> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root) earlyprintk=serial;
NSA325> setenv ipaddr 192.168.10.200; setenv serverip 192.168.10.161; setenv netmask 255.255.255.0
NSA325> tftpboot 0x800000 uImage; tftpboot 0x2100000 uInitrd;
Using egiga0 device
TFTP from server 192.168.10.161; our IP address is 192.168.10.200
Filename 'uImage'.
Load address: 0x800000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
Using egiga0 device
TFTP from server 192.168.10.161; our IP address is 192.168.10.200
Filename 'uInitrd'.
Load address: 0x2100000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
NSA325> ping 192.168.10.161
Using egiga0 device
host 192.168.10.161 is alive
NSA325> tftpboot 0x800000 uImage
Using egiga0 device
TFTP from server 192.168.10.161; our IP address is 192.168.10.200
Filename 'uImage'.
Load address: 0x800000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
NSA325> tftpboot 0x800000 uImage; tftpboot 0x2100000 uInitrd;
Using egiga0 device
TFTP from server 192.168.10.161; our IP address is 192.168.10.200
Filename 'uImage'.
Load address: 0x800000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
###############################################
152.3 KiB/s
done
Bytes transferred = 5457740 (53474c hex)
Using egiga0 device
TFTP from server 192.168.10.161; our IP address is 192.168.10.200
Filename 'uInitrd'.
Load address: 0x2100000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#########
148.4 KiB/s
done
Bytes transferred = 9671091 (9391b3 hex)
NSA325> bootm 0x800000 0x2100000
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux-5.13.6-kirkwood-tld-1
Created: 2023-03-13 16:13:31 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 5457676 Bytes = 5.2 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 02100000 ...
Image Name: initramfs-5.13.6-kirkwood-tld-1
Created: 2021-09-24 1:06:32 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 9671027 Bytes = 9.2 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
Loading Ramdisk to 1f1d4000, end 1fb0d173 ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000][ T0] Booting Linux on physical CPU 0x0
[ 0.000000][ T0] Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021
[ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000][ T0] OF: fdt: Machine model: Synology DS413j
[ 0.000000][ T0] printk: bootconsole [earlycon0] enabled
[ 0.000000][ T0] Memory policy: Data cache writeback
[ 0.000000][ T0] Zone ranges:
[ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Movable zone start for each node
[ 0.000000][ T0] Early memory node ranges
[ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x80000@0(uboot,0x700000@0x100000(root) earlyprintk=serial
[ 0.000000][ T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000][ T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000][ T0] Memory: 490912K/524288K available (11264K kernel code, 1553K rwdata, 4272K rodata, 1024K init, 309K bss, 33376K reserved, 0K cma-reserved)
[ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x408/0x7b4 with crng_init=0
[ 0.000000][ T0] trace event string verifier disabled
[ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000][ T0] Trampoline variant of Tasks RCU enabled.
[ 0.000000][ T0] Tracing variant of Tasks RCU enabled.
[ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000002][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.008597][ T0] Switching to timer-based delay loop, resolution 5ns
[ 0.015970][ T0] Console: colour dummy device 80x30
[ 0.021228][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[ 0.032549][ T0] pid_max: default: 32768 minimum: 301
[ 0.038221][ T0] LSM: Security Framework initializing
[ 0.043743][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.051850][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.061554][ T0] CPU: Testing write buffer coherency: ok
[ 0.069228][ T1] Setting up static identity map for 0x100000 - 0x100058
[ 0.076410][ T1] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
[ 0.082597][ T1] rcu: Hierarchical SRCU implementation.
[ 0.089353][ T1] devtmpfs: initialized
[ 0.101865][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.112548][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.148190][ T1] prandom32: self test passed (less than 6 bits correlated)
[ 0.155412][ T1] prandom: seed boundary self test passed
[ 0.164188][ T1] prandom: 100 self tests passed
[ 0.169044][ T1] pinctrl core: initialized pinctrl subsystem
[ 0.176356][ T1] NET: Registered protocol family 16
[ 0.182197][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.190632][ T1] audit: initializing netlink subsys (disabled)
[ 0.197939][ T1] thermal_sys: Registered thermal governor 'step_wise'
[ 0.198292][ T16] audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
[ 0.213701][ T1] cpuidle: using governor ladder
[ 0.218635][ T1] cpuidle: using governor menu
[ 0.223727][ T1] Feroceon L2: Enabling L2
[ 0.228047][ T1] Feroceon L2: Cache support initialised.
[ 0.243863][ T1] No ATAGs?
[ 2.568602][ C0] random: fast init done
[ 3.897126][ T39] "cryptomgr_test" (39) uses obsolete ecb(arc4) skcipher
[ 3.923650][ T59] wait_for_initramfs() called before rootfs_initcalls
[ 4.118715][ T1] raid6: int32x8 gen() 150 MB/s
[ 4.288712][ T1] raid6: int32x8 xor() 91 MB/s
[ 4.458780][ T1] raid6: int32x4 gen() 146 MB/s
[ 4.628629][ T1] raid6: int32x4 xor() 95 MB/s
[ 4.798663][ T1] raid6: int32x2 gen() 186 MB/s
[ 4.968699][ T1] raid6: int32x2 xor() 113 MB/s
[ 5.138671][ T1] raid6: int32x1 gen() 130 MB/s
[ 5.308627][ T1] raid6: int32x1 xor() 79 MB/s
[ 5.313611][ T1] raid6: using algorithm int32x2 gen() 186 MB/s
[ 5.319744][ T1] raid6: .... xor() 113 MB/s, rmw enabled
[ 5.325340][ T1] raid6: using intx1 recovery algorithm
[ 5.331001][ T1] vgaarb: loaded
[ 5.334866][ T1] SCSI subsystem initialized
[ 5.339779][ T1] usbcore: registered new interface driver usbfs
[ 5.346032][ T1] usbcore: registered new interface driver hub
[ 5.352147][ T1] usbcore: registered new device driver usb
[ 5.358071][ T1] pps_core: LinuxPPS API ver. 1 registered
[ 5.363776][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 5.373678][ T1] PTP clock support registered
[ 5.379850][ T1] clocksource: Switched to clocksource orion_clocksource
[ 5.470402][ T1] VFS: Disk quotas dquot_6.6.0
[ 5.475122][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.507617][ T1] NET: Registered protocol family 2
[ 5.520022][ T1] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 5.540218][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 5.549341][ T1] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 5.569954][ T1] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 5.577873][ T1] TCP: Hash tables configured (established 4096 bind 4096)
[ 5.600095][ T1] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 5.608108][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.629885][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.637784][ T1] NET: Registered protocol family 1
[ 5.660431][ T1] RPC: Registered named UNIX socket transport module.
[ 5.667086][ T1] RPC: Registered udp transport module.
[ 5.689863][ T1] RPC: Registered tcp transport module.
[ 5.695295][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.709872][ T1] PCI: CLS 0 bytes, default 32
[ 5.719874][ T1] NetWinder Floating Point Emulator V0.97 (double precision)
[ 5.727492][ T58] Trying to unpack rootfs image as initramfs...
[ 7.055474][ T58] Freeing initrd memory: 9448K
[ 7.397103][ T1] Initialise system trusted keyrings
[ 7.402391][ T1] Key type blacklist registered
[ 7.407319][ T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 7.414655][ T1] zbud: loaded
[ 7.419090][ T1] NFS: Registering the id_resolver key type
[ 7.424965][ T1] Key type id_resolver registered
[ 7.429896][ T1] Key type id_legacy registered
[ 7.434652][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 7.442111][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 7.450254][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.457564][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 7.465735][ T1] fuse: init (API version 7.34)
[ 7.470815][ T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 7.478146][ T1] orangefs_init: module version upstream loaded
[ 7.484334][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
[ 7.570967][ T1] xor: measuring software checksum speed
[ 7.583181][ T1] arm4regs : 1485 MB/sec
[ 7.599355][ T1] 8regs : 890 MB/sec
[ 7.612155][ T1] 32regs : 1282 MB/sec
[ 7.617236][ T1] xor: using function: arm4regs (1485 MB/sec)
[ 7.623223][ T1] async_tx: api initialized (async)
[ 7.628307][ T1] Key type asymmetric registered
[ 7.633161][ T1] Asymmetric key parser 'x509' registered
[ 7.638807][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 7.647028][ T1] io scheduler bfq registered
[ 7.801205][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 7.810919][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: host bridge /mbus@f1000000/pcie@82000000 ranges:
[ 7.820886][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000
[ 7.831061][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1044000..0x00f1045fff -> 0x0000044000
[ 7.841234][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1080000..0x00f1081fff -> 0x0000080000
[ 7.851410][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 7.862107][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 7.872797][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 7.883481][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 7.894486][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[ 7.902818][ T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 7.909036][ T1] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff])
[ 7.919979][ T1] pci_bus 0000:00: root bus resource [mem 0xf1044000-0xf1045fff] (bus address [0x00044000-0x00045fff])
[ 7.930920][ T1] pci_bus 0000:00: root bus resource [mem 0xf1080000-0xf1081fff] (bus address [0x00080000-0x00081fff])
[ 7.941862][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 7.949469][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 7.956617][ T1] pci 0000:00:01.0: [11ab:6282] type 01 class 0x060400
[ 7.963396][ T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[ 7.971180][ T1] pci 0000:00:02.0: [11ab:6282] type 01 class 0x060400
[ 7.977932][ T1] pci 0000:00:02.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[ 7.987107][ T1] PCI: bus0: Fast back to back transfers disabled
[ 7.993448][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 8.002225][ T1] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 8.011164][ T1] pci 0000:01:00.0: [11ab:7042] type 00 class 0x010000
[ 8.017921][ T1] pci 0000:01:00.0: reg 0x10: [mem 0x14000000-0x140fffff 64bit]
[ 8.025474][ T1] pci 0000:01:00.0: reg 0x18: [io 0x0000-0x00ff]
[ 8.031950][ T1] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 8.000 Gb/s with 2.5 GT/s PCIe x4 link)
[ 8.047771][ T1] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 8.060182][ T1] PCI: bus1: Fast back to back transfers disabled
[ 8.066494][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 8.075604][ T1] PCI: bus2: Fast back to back transfers enabled
[ 8.081848][ T1] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 8.089357][ T1] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff]
[ 8.096989][ T1] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff]
[ 8.104093][ T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pref]
[ 8.112072][ T1] pci 0000:00:02.0: BAR 6: assigned [mem 0xe0200000-0xe02007ff pref]
[ 8.120053][ T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit]
[ 8.128107][ T1] pci 0000:01:00.0: BAR 2: assigned [io 0x10000-0x100ff]
[ 8.135129][ T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 8.140836][ T1] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff]
[ 8.147834][ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 8.155376][ T1] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 8.161176][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0143)
[ 8.168548][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
[ 8.230704][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 8.240808][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
[ 8.300707][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 8.311090][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 8.319394][ T1] printk: console [ttyS0] disabled
[ 8.324533][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A
[ 8.334332][ T1] printk: console [ttyS0] enabled
[ 8.334332][ T1] printk: console [ttyS0] enabled
[ 8.344154][ T1] printk: bootconsole [earlycon0] disabled
[ 8.344154][ T1] printk: bootconsole [earlycon0] disabled
[ 8.356198][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 12500000) is a 16550A
[ 8.373018][ T1] loop: module loaded
[ 8.377259][ T1] sata_mv 0000:01:00.0: enabling device (0140 -> 0143)
[ 8.384188][ T1] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
[ 8.398374][ T1] scsi host0: sata_mv
[ 8.402818][ T1] scsi host1: sata_mv
[ 8.407158][ T1] scsi host2: sata_mv
[ 8.411533][ T1] scsi host3: sata_mv
[ 8.415591][ T1] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 37
[ 8.424031][ T1] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 37
[ 8.432443][ T1] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 37
[ 8.440855][ T1] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 37
[ 8.450626][ T1] sata_mv f1080000.sata: slots 32 ports 2
[ 8.459499][ T1] scsi host4: sata_mv
[ 8.463937][ T1] scsi host5: sata_mv
[ 8.467998][ T1] ata5: SATA max UDMA/133 irq 34
[ 8.472869][ T1] ata6: SATA max UDMA/133 irq 34
[ 8.479313][ T1] spi-nor spi0.0: found n25q064, expected m25p80
[ 8.485830][ T1] spi-nor spi0.0: n25q064 (8192 Kbytes)
[ 8.491299][ T1] 1 cmdlinepart partitions found on MTD device spi0.0
[ 8.497947][ T1] Creating 1 MTD partitions on "spi0.0":
[ 8.503491][ T1] 0x000000000000-0x000000080000 : "uboot,0x700000@0x100000(root"
[ 8.512745][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 8.521354][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 8.532643][ T1] libphy: Fixed MDIO Bus: probed
[ 8.538655][ T1] libphy: orion_mdio_bus: probed
[ 8.543742][ T1] mdio_bus f1072004.mdio-bus-mii: MDIO device at address 8 is missing.
[ 8.565192][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 8.574759][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 52:3b:20:9c:11:51
[ 8.584414][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.591777][ T1] ehci-pci: EHCI PCI platform driver
[ 8.596999][ T1] ehci-orion: EHCI orion driver
[ 8.601949][ T1] orion-ehci f1050000.ehci: EHCI Host Controller
[ 8.608181][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 8.616781][ T1] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000
[ 8.649878][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 8.656850][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[ 8.665884][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.673882][ T1] usb usb1: Product: EHCI Host Controller
[ 8.679505][ T1] usb usb1: Manufacturer: Linux 5.13.6-kirkwood-tld-1 ehci_hcd
[ 8.686968][ T1] usb usb1: SerialNumber: f1050000.ehci
[ 8.692985][ T1] hub 1-0:1.0: USB hub found
[ 8.697535][ T1] hub 1-0:1.0: 1 port detected
[ 8.702923][ T1] usbcore: registered new interface driver usb-storage
[ 8.710080][ T1] mousedev: PS/2 mouse device common for all mice
[ 8.716661][ T1] i2c /dev entries driver
[ 8.722551][ T1] rtc-s35390a 0-0030: error resetting chip
[ 8.728794][ T1] rtc-s35390a: probe of 0-0030 failed with error -5
[ 8.736063][ T1] device-mapper: uevent: version 1.0.3
[ 8.741748][ T1] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 8.751350][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 8.758661][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 8.766069][ T1] device-mapper: multipath service-time: version 0.3.0 loaded
[ 8.773514][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[ 8.780402][ T94] ata1: SATA link down (SStatus 0 SControl 300)
[ 8.786553][ T1] device-mapper: raid: Loading target version 1.15.1
[ 8.795330][ T1] hid: raw HID events driver (C) Jiri Kosina
[ 8.801597][ T1] drop_monitor: Initializing network drop monitor service
[ 8.809558][ T1] NET: Registered protocol family 10
[ 8.814797][ T104] ata5: SATA link down (SStatus 0 SControl F300)
[ 8.822166][ T1] Segment Routing with IPv6
[ 8.826552][ T1] RPL Segment Routing with IPv6
[ 8.831474][ T1] NET: Registered protocol family 17
[ 8.836857][ T1] Key type dns_resolver registered
[ 8.842528][ T1] registered taskstats version 1
[ 8.847354][ T1] Loading compiled-in X.509 certificates
[ 8.853243][ T1] zswap: loaded using pool lzo/zbud
[ 8.858614][ T1] Key type ._fscrypt registered
[ 8.863414][ T1] Key type .fscrypt registered
[ 8.868059][ T1] Key type fscrypt-provisioning registered
[ 8.875332][ T1] Key type big_key registered
[ 8.904256][ T1] Key type encrypted registered
[ 8.989878][ T117] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 9.141399][ T96] ata2: SATA link down (SStatus 0 SControl 300)
[ 9.191666][ T117] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.32
[ 9.200614][ T117] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 9.208500][ T117] usb 1-1: Product: USB2.0 Hub
[ 9.213957][ T117] hub 1-1:1.0: USB hub found
[ 9.218794][ T117] hub 1-1:1.0: 4 ports detected
[ 9.481413][ T98] ata3: SATA link down (SStatus 0 SControl 300)
[ 9.821374][ T100] ata4: SATA link down (SStatus 0 SControl 300)
[ 9.939872][ T117] usb 1-1.2: new high-speed USB device number 3 using orion-ehci
[ 10.091039][ T117] usb 1-1.2: New USB device found, idVendor=0781, idProduct=5590, bcdDevice= 1.00
[ 10.100177][ T117] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 10.108254][ T117] usb 1-1.2: Product: Ultra
[ 10.112648][ T117] usb 1-1.2: Manufacturer: SanDisk
[ 10.117658][ T117] usb 1-1.2: SerialNumber: 4C530001230325109084
[ 10.124592][ T117] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 10.132130][ T117] scsi host6: usb-storage 1-1.2:1.0
[ 10.162608][ T106] ata6: SATA link down (SStatus 0 SControl F300)
[ 10.181959][ T1] Freeing unused kernel memory: 1024K
[ 10.187986][ T1] Checked W+X mappings: passed, no W+X pages found
[ 10.194410][ T1] Run /init as init process
Loading, please wait...
Starting version 247.3-6
[ 11.077209][ T150] usbcore: registered new interface driver uas
[ 11.210889][ T108] scsi 6:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6
[ 11.228970][ T103] sd 6:0:0:0: [sda] 60751872 512-byte logical blocks: (31.1 GB/29.0 GiB)
[ 11.244595][ T103] sd 6:0:0:0: [sda] Write Protect is off
[ 11.257095][ T103] sd 6:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 11.304074][ T103] sda: sda1
[ 11.311962][ T103] sd 6:0:0:0: [sda] Attached SCSI removable disk
[ 17.419901][ T94] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 17.431657][ T94] ata1.00: ATA-8: TOSHIBA DT01ACA100, MS2OA750, max UDMA/133
[ 17.438978][ T94] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 17.453556][ T94] ata1.00: configured for UDMA/133
[ 17.458995][ T117] scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA1 A750 PQ: 0 ANSI: 5
[ 17.472227][ T103] sd 0:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 17.485514][ T103] sd 0:0:0:0: [sdb] 4096-byte physical blocks
[ 17.491715][ T103] sd 0:0:0:0: [sdb] Write Protect is off
[ 17.497415][ T103] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.533486][ T103] sdb: sdb1 sdb2
[ 17.543556][ T103] sd 0:0:0:0: [sdb] Attached SCSI disk
[ 21.009335][ C0] random: crng init done
[ 21.210320][ T154] reg-fixed-voltage regulators-hdd-30-4:regulator@3: nonexclusive access to GPIO for regulators-hdd-30-4:regulator@3
[ 26.251462][ T154] reg-fixed-voltage regulators-hdd-30-4:regulator@4: nonexclusive access to GPIO for regulators-hdd-30-4:regulator@4
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.36.1
[/sbin/fsck.ext3 (1) -- /dev/sdb1] fsck.ext3 -a -C0 /dev/sdb1
rootfs: recovering journal
rootfs: clean, 17710/1900544 files, 568139/7591244 blocks
done.
[ 42.851095][ T181] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem
[ 43.123663][ T181] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 45.642873][ T1] systemd[1]: System time before build time, advancing clock.
[ 45.796713][ T1] systemd[1]: Inserted module 'autofs4'
[ 45.941028][ T1] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 45.965665][ T1] systemd[1]: Detected architecture arm.
Welcome to Debian GNU/Linux 11 (bullseye)!
[ 46.042626][ T1] systemd[1]: Set hostname to <debian>.
[ 47.800948][ T1] systemd[1]: Queued start job for default target Graphical Interface.
[ 47.811522][ T1] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 47.824760][ T1] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 47.835687][ T1] systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 47.871063][ T1] systemd[1]: Created slice system-modprobe.slice.
[ OK ] Created slice system-modprobe.slice.
[ 47.911002][ T1] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 47.950834][ T1] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 47.990514][ T1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ 48.030476][ T1] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 48.071165][ T1] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary…s File System Automount Point.
[ 48.110330][ T1] systemd[1]: Reached target Local Encrypted Volumes.
[ OK ] Reached target Local Encrypted Volumes.
[ 48.150566][ T1] systemd[1]: Reached target Paths.
[ OK ] Reached target Paths.
[ 48.190297][ T1] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 48.221666][ T1] systemd[1]: Listening on RPCbind Server Activation Socket.
[ OK ] Listening on RPCbind Server Activation Socket.
[ 48.260796][ T1] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 48.300477][ T1] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 48.341197][ T1] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 48.380873][ T1] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 48.420992][ T1] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 48.461028][ T1] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 48.500759][ T1] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 48.540946][ T1] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 48.553735][ T1] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 48.593395][ T1] systemd[1]: Mounting NFSD configuration filesystem...
Mounting NFSD configuration filesystem...
[ 48.643483][ T1] systemd[1]: Mounting RPC Pipe File System...
Mounting RPC Pipe File System...
[ 48.694031][ T1] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 48.743885][ T1] systemd[1]: Mounting Kernel Trace File System...
Mounting Kernel Trace File System...
[ 48.790393][ T1] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 48.805690][ T1] systemd[1]: Starting Create list of static device nodes for the current kernel...
Starting Create list of st…odes for the current kernel...
[ 48.854201][ T1] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 48.904337][ T1] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 48.954260][ T1] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 49.025386][ T1] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 49.035667][ T1] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 49.049723][ T1] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 49.120989][ T1] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 49.154098][ T1] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 49.224031][ T1] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 49.323482][ T1] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 49.391167][ T1] systemd[1]: Mounted NFSD configuration filesystem.
[ OK ] Mounted NFSD configuration filesystem.
[ 49.418987][ T1] systemd[1]: Mounted RPC Pipe File System.
[ OK ] Mounted RPC Pipe File System.
[ 49.460129][ T222] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[ 49.476584][ T1] systemd[1]: Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Debug File System.
[ 49.541122][ T1] systemd[1]: Mounted Kernel Trace File System.
[ OK ] Mounted Kernel Trace File System.
[ 49.571819][ T1] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ OK ] Finished Create list of st… nodes for the current kernel.
[ 49.632367][ T1] systemd[1]: modprobe@configfs.service: Succeeded.
[ 49.650232][ T1] systemd[1]: Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module configfs.
[ 49.672145][ T1] systemd[1]: modprobe@drm.service: Succeeded.
[ 49.679220][ T1] systemd[1]: Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module drm.
[ 49.730992][ T1] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Modules.
[ OK ] Finished Remount Root and Kernel File Systems.
Activating swap /swapfile1...
Mounting FUSE Control File System...
Mounting Kernel Configuration File System...
Starting pNFS block layout mapping daemon...
Starting Flush Journal to Persistent Storage...
Starting Load/Save Random Seed...
Starting Apply Kernel Variables...
Starting Create System Users...
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Started pNFS block layout mapping daemon.
[ 50.380054][ T225] Adding 524284k swap on /swapfile1. Priority:-2 extents:22 across:27921988k FS
[ OK ] Activated swap /swapfile1.
[ OK ] Reached target Swap.
[ 50.448996][ T218] systemd-journald[218]: Received client request to flush runtime journal.
[ OK ] Finished Apply Kernel Variables.
[ 50.576444][ T218] systemd-journald[218]: File /var/log/journal/c4334d5b2fba8bce5294b56551baee86/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ OK ] Finished Coldplug All udev Devices.
Starting Helper to synchronize boot up for ifupdown...
[ OK ] Finished Create System Users.
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Load/Save Random Seed.
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Local File Systems (Pre).
Mounting /tmp...
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Mounted /tmp.
[ OK ] Reached target Local File Systems.
Starting Preprocess NFS configuration...
[ OK ] Finished Preprocess NFS configuration.
Starting NFSv4 ID-name mapping service...
[ OK ] Reached target NFS client services.
[ OK ] Finished Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Started Rule-based Manager for Device Events and Files.
[ OK ] Started NFSv4 ID-name mapping service.
[ OK ] Finished Create Volatile Files and Directories.
Starting RPC bind portmap service...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started RPC bind portmap service.
[ OK ] Finished Update UTMP about System Boot/Shutdown.
[ OK ] Reached target RPC Port Mapper.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[ OK ] Started Daily man-db regeneration.
[ OK ] Started Daily Cleanup of Temporary Directories.[ 52.617301][ T251] gpio-fan gpio-fan-100-15-35-1: GPIO fan initialized
[ OK ] Reached target Timers.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Avahi mDNS/DNS-SD Stack...
[ OK ] Started D-Bus System Message Bus.
Starting Remove Stale Onli…t4 Metadata Check Snapshots...
Starting User Login Management...
[ OK ] Found device /dev/ttyS0.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ 53.380167][ T257] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[ 53.549391][ T257] sd 0:0:0:0: Attached scsi generic sg1 type 0
[ 53.562983][ T251] orion_wdt: Initial timeout 21 sec
[ OK ] Started User Login Management.
[ 54.089558][ T247] marvell-cesa f1030000.crypto: CESA device successfully registered
[ OK ] Found device /sys/subsystem/net/devices/eth0.
[ OK ] Finished Helper to synchronize boot up for ifupdown.
[ OK ] Started ifup for eth0.
Starting Raise network interfaces...
[*** ] A start job is running for Raise network interfaces (10s / 5min 7s)
[ 58.897492][ C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[ OK ] Finished Raise network interfaces.
[ OK ] Reached target Network.
Starting NFS Mount Daemon...
Starting Network Time Service...
Starting /etc/rc.local Compatibility...
Starting OpenBSD Secure Shell server...
[ OK ] Started NFS Mount Daemon.
Starting NFS server and services...
[ OK ] Started Network Time Service.
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Started OpenBSD Secure Shell server.
[ 67.466103][ T401] NFSD: Using UMH upcall client tracking operations.
[ 67.472851][ T401] NFSD: starting 90-second grace period (net f000001c)
[ OK ] Finished NFS server and services.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
Starting LSB: Starts syslogd...
Starting Permit User Sessions...
[ OK ] Finished Permit User Sessions.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Started LSB: Starts syslogd.
Starting LSB: Starts klogd...
[ OK ] Started LSB: Starts klogd.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Finished Update UTMP about System Runlevel Changes.
Debian GNU/Linux 11 debian ttyS0
debian login: root
Password:
Linux debian 5.13.6-kirkwood-tld-1 #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021 armv5tel
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Aug 7 15:26:17 CEST 2022 on ttyS0
debian
192.168.10.18
Synology DS413j
Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021
Debian 11.6
Wed Mar 15 13:37:14 CET 2023 up 27 minutes
root@debian:~#
|
Re: Install Debian on Synology DS413J March 15, 2023 02:03PM |
Admin Registered: 13 years ago Posts: 19,102 |
I forgot remind you one important step.
Note: Before booting with u-boot-2017.07-tld-1 NSA325, we need to restore the uImage to the original, i.e. no DTB embedded. So make sure the /boot/uImage is the same as uImage.orig. This is because we are booting with separate DTB.
Your last attempt to boot from USB was not successful because the uImage has DTB embbeded.
=====
With USB rootfs attached, and at least 1 HDD attached. kwboot the NSA325 u-boot, and
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/15/2023 03:38PM by bodhi.
Note: Before booting with u-boot-2017.07-tld-1 NSA325, we need to restore the uImage to the original, i.e. no DTB embedded. So make sure the /boot/uImage is the same as uImage.orig. This is because we are booting with separate DTB.
Your last attempt to boot from USB was not successful because the uImage has DTB embbeded.
=====
With USB rootfs attached, and at least 1 HDD attached. kwboot the NSA325 u-boot, and
mw.l 0xF1010100 0x40008000 mw.l 0xF1010140 0x00003AA4 sleep 3 usb start boot
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/15/2023 03:38PM by bodhi.
|
Re: Install Debian on Synology DS413J March 15, 2023 02:11PM |
Admin Registered: 13 years ago Posts: 19,102 |
Billy,
> I can boot with the new u-boot if i do commands
> with tftp etc...
That's also good news, because Ethernet is working! so these 2 boards use the same PHY addr.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> I can boot with the new u-boot if i do commands
> with tftp etc...
That's also good news, because Ethernet is working! so these 2 boards use the same PHY addr.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Install Debian on Synology DS413J March 15, 2023 05:32PM |
Registered: 1 year ago Posts: 178 |
bodhi Wrote:
-------------------------------------------------------
> I forgot remind you one important step.
>
> Note: Before booting with u-boot-2017.07-tld-1
> NSA325, we need to restore the uImage to the
> original, i.e. no DTB embedded. So make sure the
> /boot/uImage is the same as uImage.orig. This is
> because we are booting with separate DTB.
>
> Your last attempt to boot from USB was not
> successful because the uImage has DTB embbeded.
>
> =====
>
> With USB rootfs attached, and at least 1 HDD
> attached. kwboot the NSA325 u-boot, and
>
>
Only this command after stopping the boot proces ? correct ?
-------------------------------------------------------
> I forgot remind you one important step.
>
> Note: Before booting with u-boot-2017.07-tld-1
> NSA325, we need to restore the uImage to the
> original, i.e. no DTB embedded. So make sure the
> /boot/uImage is the same as uImage.orig. This is
> because we are booting with separate DTB.
>
> Your last attempt to boot from USB was not
> successful because the uImage has DTB embbeded.
>
> =====
>
> With USB rootfs attached, and at least 1 HDD
> attached. kwboot the NSA325 u-boot, and
>
>
> mw.l 0xF1010100 0x40008000 > mw.l 0xF1010140 0x00003AA4 > sleep 3 > usb start > boot >
Only this command after stopping the boot proces ? correct ?
|
Re: Install Debian on Synology DS413J March 15, 2023 06:14PM |
Admin Registered: 13 years ago Posts: 19,102 |
> > With USB rootfs attached, and at least 1 HDD
> > attached. kwboot the NSA325 u-boot, and
> >
> >
> Only this command after stopping the boot proces ?
> correct ?
Correct, we are booting with the NSA325 default envs , which will find the kernel files on USB roots, load them, and boot them. If you also do printenv before boot, you will see the logic.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> > attached. kwboot the NSA325 u-boot, and
> >
> >
> > mw.l 0xF1010100 0x40008000 > > mw.l 0xF1010140 0x00003AA4 > > sleep 3 > > usb start > > boot > >>
> Only this command after stopping the boot proces ?
> correct ?
Correct, we are booting with the NSA325 default envs , which will find the kernel files on USB roots, load them, and boot them. If you also do printenv before boot, you will see the logic.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Install Debian on Synology DS413J March 16, 2023 02:58AM |
Registered: 1 year ago Posts: 178 |
I already did it and it doesn't work.
Maybe because i have USB and HDD with roofs label ? I'll try to remove the HDD just to be sure about that :
Maybe because i have USB and HDD with roofs label ? I'll try to remove the HDD just to be sure about that :
root@Arc-170:~/tools# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p
Sending boot message. Please reboot the target...|
Sending boot image...
0 % [......................................................................]
1 % [......................................................................]
3 % [......................................................................]
5 % [......................................................................]
6 % [......................................................................]
8 % [......................................................................]
10 % [......................................................................]
11 % [......................................................................]
13 % [......................................................................]
15 % [......................................................................]
17 % [......................................................................]
18 % [......................................................................]
20 % [......................................................................]
22 % [......................................................................]
23 % [......................................................................]
25 % [......................................................................]
27 % [......................................................................]
29 % [......................................................................]
30 % [......................................................................]
32 % [......................................................................]
34 % [......................................................................]
35 % [......................................................................]
37 % [......................................................................]
39 % [......................................................................]
41 % [......................................................................]
42 % [......................................................................]
44 % [......................................................................]
46 % [......................................................................]
47 % [......................................................................]
49 % [......................................................................]
51 % [......................................................................]
53 % [......................................................................]
54 % [......................................................................]
56 % [......................................................................]
58 % [......................................................................]
59 % [......................................................................]
61 % [......................................................................]
63 % [......................................................................]
64 % [......................................................................]
66 % [......................................................................]
68 % [......................................................................]
70 % [......................................................................]
71 % [......................................................................]
73 % [......................................................................]
75 % [......................................................................]
76 % [......................................................................]
78 % [......................................................................]
80 % [......................................................................]
82 % [......................................................................]
83 % [......................................................................]
85 % [......................................................................]
87 % [......................................................................]
88 % [......................................................................]
90 % [......................................................................]
92 % [......................................................................]
94 % [......................................................................]
95 % [......................................................................]
97 % [......................................................................]
99 % [....................................]
[Type Ctrl-\ + c to quit]
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:42:03 -0700)
ZyXEL NSA325 2-Bay Power Media Server
SoC: Kirkwood 88F6282_A1
DRAM: 512 MiB
WARNING: Caches not enabled
NAND: 0 MiB
*** Warning - readenv() failed, using default environment
In: serial
Out: serial
Err: serial
Net: egiga0
MV88E1318 PHY initialized on egiga0
Hit any key to stop autoboot: 0
NSA325> printenv
arcNumber=4495
baudrate=115200
bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset
bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm$load_uimage_addr; fi; fi
bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi
bootdelay=10
bootdev=usb
console=console=ttyS0,115200
device=0:1
devices=usb ide
disks=0 1 2 3
dtb_file=/boot/dts/kirkwood-nsa325.dtb
ethact=egiga0
ethaddr=52:3b:20:9c:11:51
if_netconsole=ping $serverip
ipaddr=192.168.0.231
led_error=orange blinking
led_exit=green off
led_init=green blinking
load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file
load_dtb_addr=0x1c00000
load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd
load_initrd_addr=0x1100000
load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage
load_uimage_addr=0x800000
mainlineLinux=yes
mtdids=nand0=orion_nand
mtdparts=mtdparts=orion_nand:0x100000(uboot),0x80000(stock_uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2)
partition=nand0,2
preboot_nc=run if_netconsole start_netconsole
scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done
serverip=192.168.0.220
set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;
stderr=serial
stdin=serial
stdout=serial
uenv_addr=0x810000
uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize
uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done;
uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done;
uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi
uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi
usb_ready_retry=15
Environment size: 3016/131068 bytes
NSA325> mw.l 0xF1010100 0x40008000
NSA325> mw.l 0xF1010140 0x00003AA4
NSA325> sleep 3
NSA325> usb start
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
scanning usb for storage devices...
Use USB retry period from the environment: 15 second(s)
1 Storage Device(s) found
NSA325> boot
Reset IDE: ide_preinit failed
Partition Map for USB device 0 -- Partition Type: DOS
Part Start Sector Num Sectors UUID Type
1 21920 60729952 00000000-01 07
## Unknown partition table type 0
## Unknown partition table type 0
## Unknown partition table type 0
## Unknown partition table type 0
## Unknown partition table type 0
## Unknown partition table type 0
loading envs from usb 0 ...
** File not found /boot/uEnv.txt **
no IDE devices available
running scan_disk ...
Scan device usb
device usb 0:1
1 bytes read in 754 ms (0 Bytes/s)
Found bootable drive on usb 0
loading uImage ...
5457740 bytes read in 1054 ms (4.9 MiB/s)
loading uInitrd ...
9672316 bytes read in 1002 ms (9.2 MiB/s)
loading DTB /boot/dts/kirkwood-nsa325.dtb ...
14014 bytes read in 1676 ms (7.8 KiB/s)
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux-5.13.6-kirkwood-tld-1
Created: 2023-03-07 7:29:19 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 5457676 Bytes = 5.2 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
Image Name: initramfs-5.13.6-kirkwood-tld-1
Created: 2023-03-03 15:37:42 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 9672252 Bytes = 9.2 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 01c00000
Booting using the fdt blob at 0x1c00000
Loading Kernel Image ... OK
Loading Ramdisk to 1f1d4000, end 1fb0d63c ... OK
Loading Device Tree to 1f1cd000, end 1f1d36bd ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000][ T0] Booting Linux on physical CPU 0x0
[ 0.000000][ T0] Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021
[ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000][ T0] OF: fdt: Machine model: Synology DS413j
[ 0.000000][ T0] Memory policy: Data cache writeback
[ 0.000000][ T0] Zone ranges:
[ 0.000000][ T0] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000][ T0] Movable zone start for each node
[ 0.000000][ T0] Early memory node ranges
[ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000][ T0] Kernel command line: console=ttyS0,115200n8
[ 0.000000][ T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000][ T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000][ T0] Memory: 110504K/131072K available (11264K kernel code, 1553K rwdata, 4272K rodata, 1024K init, 309K bss, 20568K reserved, 0K cma-reserved)
[ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x408/0x7b4 with crng_init=0
[ 0.000000][ T0] trace event string verifier disabled
[ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000][ T0] Trampoline variant of Tasks RCU enabled.
[ 0.000000][ T0] Tracing variant of Tasks RCU enabled.
[ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000002][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.000049][ T0] Switching to timer-based delay loop, resolution 5ns
[ 0.000784][ T0] Console: colour dummy device 80x30
[ 0.000849][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[ 0.000885][ T0] pid_max: default: 32768 minimum: 301
[ 0.001214][ T0] LSM: Security Framework initializing
[ 0.001365][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001406][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.002615][ T0] CPU: Testing write buffer coherency: ok
[ 0.004662][ T1] Setting up static identity map for 0x100000 - 0x100058
[ 0.004947][ T1] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
[ 0.005235][ T1] rcu: Hierarchical SRCU implementation.
[ 0.006414][ T1] devtmpfs: initialized
[ 0.014679][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.014726][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.042890][ T1] prandom32: self test passed (less than 6 bits correlated)
[ 0.042928][ T1] prandom: seed boundary self test passed
[ 0.046086][ T1] prandom: 100 self tests passed
[ 0.046103][ T1] pinctrl core: initialized pinctrl subsystem
[ 0.047476][ T1] NET: Registered protocol family 16
[ 0.048013][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.048807][ T1] audit: initializing netlink subsys (disabled)
[ 0.050027][ T1] thermal_sys: Registered thermal governor 'step_wise'
[ 0.050426][ T16] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[ 0.050561][ T1] cpuidle: using governor ladder
[ 0.050648][ T1] cpuidle: using governor menu
[ 0.050999][ T1] Feroceon L2: Enabling L2
[ 0.051044][ T1] Feroceon L2: Cache support initialised.
[ 0.061250][ T1] No ATAGs?
[ 2.560054][ C0] random: fast init done
[ 3.709158][ T39] "cryptomgr_test" (39) uses obsolete ecb(arc4) skcipher
[ 3.729066][ T59] wait_for_initramfs() called before rootfs_initcalls
[ 3.910191][ T1] raid6: int32x8 gen() 150 MB/s
[ 4.080105][ T1] raid6: int32x8 xor() 91 MB/s
[ 4.250228][ T1] raid6: int32x4 gen() 146 MB/s
[ 4.420148][ T1] raid6: int32x4 xor() 95 MB/s
[ 4.590163][ T1] raid6: int32x2 gen() 188 MB/s
[ 4.760082][ T1] raid6: int32x2 xor() 114 MB/s
[ 4.930235][ T1] raid6: int32x1 gen() 130 MB/s
[ 5.100195][ T1] raid6: int32x1 xor() 79 MB/s
[ 5.100209][ T1] raid6: using algorithm int32x2 gen() 188 MB/s
[ 5.100220][ T1] raid6: .... xor() 114 MB/s, rmw enabled
[ 5.100229][ T1] raid6: using intx1 recovery algorithm
[ 5.100487][ T1] vgaarb: loaded
[ 5.100952][ T1] SCSI subsystem initialized
[ 5.101384][ T1] usbcore: registered new interface driver usbfs
[ 5.101443][ T1] usbcore: registered new interface driver hub
[ 5.101489][ T1] usbcore: registered new device driver usb
[ 5.101654][ T1] pps_core: LinuxPPS API ver. 1 registered
[ 5.101667][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 5.101695][ T1] PTP clock support registered
[ 5.103136][ T1] clocksource: Switched to clocksource orion_clocksource
[ 5.183697][ T1] VFS: Disk quotas dquot_6.6.0
[ 5.183792][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.198201][ T1] NET: Registered protocol family 2
[ 5.198350][ T1] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 5.199104][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 5.199148][ T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 5.199178][ T1] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 5.199204][ T1] TCP: Hash tables configured (established 1024 bind 1024)
[ 5.199401][ T1] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 5.199467][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.199500][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 5.199695][ T1] NET: Registered protocol family 1
[ 5.203605][ T1] RPC: Registered named UNIX socket transport module.
[ 5.203626][ T1] RPC: Registered udp transport module.
[ 5.203636][ T1] RPC: Registered tcp transport module.
[ 5.203645][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.203660][ T1] PCI: CLS 0 bytes, default 32
[ 5.203731][ T1] NetWinder Floating Point Emulator V0.97 (double precision)
[ 6.316557][ T1] Initialise system trusted keyrings
[ 6.316618][ T1] Key type blacklist registered
[ 6.316855][ T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 6.316960][ T1] zbud: loaded
[ 6.318187][ T1] NFS: Registering the id_resolver key type
[ 6.318226][ T1] Key type id_resolver registered
[ 6.318238][ T1] Key type id_legacy registered
[ 6.318277][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 6.318297][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 6.318310][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 6.318534][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 6.318919][ T1] fuse: init (API version 7.34)
[ 6.319257][ T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 6.319433][ T1] orangefs_init: module version upstream loaded
[ 6.319450][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
[ 6.398450][ T1] xor: measuring software checksum speed
[ 6.405168][ T1] arm4regs : 1485 MB/sec
[ 6.416279][ T1] 8regs : 890 MB/sec
[ 6.424008][ T1] 32regs : 1282 MB/sec
[ 6.424023][ T1] xor: using function: arm4regs (1485 MB/sec)
[ 6.424041][ T1] async_tx: api initialized (async)
[ 6.424057][ T1] Key type asymmetric registered
[ 6.424068][ T1] Asymmetric key parser 'x509' registered
[ 6.424121][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 6.424197][ T1] io scheduler bfq registered
[ 6.573956][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 6.575602][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: host bridge /mbus@f1000000/pcie@82000000 ranges:
[ 6.575673][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000
[ 6.575709][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1044000..0x00f1045fff -> 0x0000044000
[ 6.575743][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1080000..0x00f1081fff -> 0x0000080000
[ 6.575777][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 6.575810][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 6.575841][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 6.575866][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 6.576206][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[ 6.576227][ T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 6.576248][ T1] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff])
[ 6.576267][ T1] pci_bus 0000:00: root bus resource [mem 0xf1044000-0xf1045fff] (bus address [0x00044000-0x00045fff])
[ 6.576285][ T1] pci_bus 0000:00: root bus resource [mem 0xf1080000-0xf1081fff] (bus address [0x00080000-0x00081fff])
[ 6.576300][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 6.576315][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 6.576467][ T1] pci 0000:00:01.0: [11ab:6282] type 01 class 0x060400
[ 6.576500][ T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[ 6.576818][ T1] pci 0000:00:02.0: [11ab:6282] type 01 class 0x060400
[ 6.576851][ T1] pci 0000:00:02.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[ 6.578571][ T1] PCI: bus0: Fast back to back transfers disabled
[ 6.578601][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 6.578631][ T1] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 6.578836][ T1] pci 0000:01:00.0: [11ab:7042] type 00 class 0x010000
[ 6.578872][ T1] pci 0000:01:00.0: reg 0x10: [mem 0x14000000-0x140fffff 64bit]
[ 6.578896][ T1] pci 0000:01:00.0: reg 0x18: [io 0x0000-0x00ff]
[ 6.579025][ T1] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 8.000 Gb/s with 2.5 GT/s PCIe x4 link)
[ 6.579206][ T1] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 6.580818][ T1] PCI: bus1: Fast back to back transfers disabled
[ 6.580843][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 6.582571][ T1] PCI: bus2: Fast back to back transfers enabled
[ 6.582595][ T1] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 6.582767][ T1] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff]
[ 6.582790][ T1] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff]
[ 6.582809][ T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pref]
[ 6.582830][ T1] pci 0000:00:02.0: BAR 6: assigned [mem 0xe0200000-0xe02007ff pref]
[ 6.582852][ T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit]
[ 6.582879][ T1] pci 0000:01:00.0: BAR 2: assigned [io 0x10000-0x100ff]
[ 6.582899][ T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 6.582914][ T1] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff]
[ 6.582931][ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 6.582950][ T1] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 6.583055][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0143)
[ 6.583673][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
[ 6.644000][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 6.646051][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
[ 6.704003][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 6.706341][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 6.707555][ T1] printk: console [ttyS0] disabled
[ 6.707636][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A
[ 7.887990][ T1] printk: console [ttyS0] enabled
[ 7.893593][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 12500000) is a 16550A
[ 7.910391][ T1] loop: module loaded
[ 7.914718][ T1] sata_mv 0000:01:00.0: enabling device (0140 -> 0143)
[ 7.921595][ T1] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
[ 7.935828][ T1] scsi host0: sata_mv
[ 7.940230][ T1] scsi host1: sata_mv
[ 7.944630][ T1] scsi host2: sata_mv
[ 7.948970][ T1] scsi host3: sata_mv
[ 7.953027][ T1] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 37
[ 7.961470][ T1] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 37
[ 7.969881][ T1] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 37
[ 7.978295][ T1] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 37
[ 7.988063][ T1] sata_mv f1080000.sata: slots 32 ports 2
[ 7.996964][ T1] scsi host4: sata_mv
[ 8.001354][ T1] scsi host5: sata_mv
[ 8.005474][ T1] ata5: SATA max UDMA/133 irq 34
[ 8.010299][ T1] ata6: SATA max UDMA/133 irq 34
[ 8.016783][ T1] spi-nor spi0.0: found n25q064, expected m25p80
[ 8.023316][ T1] spi-nor spi0.0: n25q064 (8192 Kbytes)
[ 8.028797][ T1] 6 fixed-partitions partitions found on MTD device spi0.0
[ 8.035903][ T1] Creating 6 MTD partitions on "spi0.0":
[ 8.041433][ T1] 0x000000000000-0x000000080000 : "RedBoot"
[ 8.048510][ T1] 0x000000080000-0x000000280000 : "zImage"
[ 8.055430][ T1] 0x000000280000-0x0000003c0000 : "rd.gz"
[ 8.062221][ T1] 0x0000003c0000-0x0000003d0000 : "vendor"
[ 8.069120][ T1] 0x0000003d0000-0x0000003f0000 : "RedBoot config"
[ 8.076713][ T1] 0x0000003f0000-0x000000400000 : "FIS directory"
[ 8.084751][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 8.093366][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 8.104658][ T1] libphy: Fixed MDIO Bus: probed
[ 8.110679][ T1] libphy: orion_mdio_bus: probed
[ 8.115726][ T1] mdio_bus f1072004.mdio-bus-mii: MDIO device at address 8 is missing.
[ 8.125262][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 8.134772][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 52:3b:20:9c:11:51
[ 8.144433][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.151718][ T1] ehci-pci: EHCI PCI platform driver
[ 8.157011][ T1] ehci-orion: EHCI orion driver
[ 8.161905][ T1] orion-ehci f1050000.ehci: EHCI Host Controller
[ 8.168191][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 8.176786][ T1] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000
[ 8.213174][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 8.220176][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[ 8.229219][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.237222][ T1] usb usb1: Product: EHCI Host Controller
[ 8.242857][ T1] usb usb1: Manufacturer: Linux 5.13.6-kirkwood-tld-1 ehci_hcd
[ 8.250329][ T1] usb usb1: SerialNumber: f1050000.ehci
[ 8.256359][ T1] hub 1-0:1.0: USB hub found
[ 8.260909][ T1] hub 1-0:1.0: 1 port detected
[ 8.266317][ T1] usbcore: registered new interface driver usb-storage
[ 8.273464][ T1] mousedev: PS/2 mouse device common for all mice
[ 8.280057][ T1] i2c /dev entries driver
[ 8.285922][ T1] rtc-s35390a 0-0030: error resetting chip
[ 8.292170][ T1] rtc-s35390a: probe of 0-0030 failed with error -5
[ 8.299444][ T1] device-mapper: uevent: version 1.0.3
[ 8.305114][ T1] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 8.314709][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 8.322016][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 8.329427][ T94] ata1: SATA link down (SStatus 0 SControl 300)
[ 8.335616][ T1] device-mapper: multipath service-time: version 0.3.0 loaded
[ 8.343085][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[ 8.349951][ T104] ata5: SATA link down (SStatus 0 SControl F300)
[ 8.356734][ T1] device-mapper: raid: Loading target version 1.15.1
[ 8.365527][ T1] hid: raw HID events driver (C) Jiri Kosina
[ 8.371738][ T1] drop_monitor: Initializing network drop monitor service
[ 8.379185][ T1] NET: Registered protocol family 10
[ 8.385522][ T1] Segment Routing with IPv6
[ 8.389907][ T1] RPL Segment Routing with IPv6
[ 8.394780][ T1] NET: Registered protocol family 17
[ 8.400154][ T1] Key type dns_resolver registered
[ 8.405709][ T1] registered taskstats version 1
[ 8.410534][ T1] Loading compiled-in X.509 certificates
[ 8.416433][ T1] zswap: loaded using pool lzo/zbud
[ 8.421804][ T1] Key type ._fscrypt registered
[ 8.426611][ T1] Key type .fscrypt registered
[ 8.431257][ T1] Key type fscrypt-provisioning registered
[ 8.438521][ T1] Key type big_key registered
[ 8.446283][ T1] Key type encrypted registered
[ 8.553162][ T117] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 8.694695][ T96] ata2: SATA link down (SStatus 0 SControl 300)
[ 8.754919][ T117] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.32
[ 8.763871][ T117] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 8.771753][ T117] usb 1-1: Product: USB2.0 Hub
[ 8.777226][ T117] hub 1-1:1.0: USB hub found
[ 8.782047][ T117] hub 1-1:1.0: 4 ports detected
[ 9.034701][ T98] ata3: SATA link down (SStatus 0 SControl 300)
[ 9.374681][ T100] ata4: SATA link down (SStatus 0 SControl 300)
[ 9.503157][ T117] usb 1-1.2: new high-speed USB device number 3 using orion-ehci
[ 9.654417][ T117] usb 1-1.2: New USB device found, idVendor=0781, idProduct=5590, bcdDevice= 1.00
[ 9.663556][ T117] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.671634][ T117] usb 1-1.2: Product: Ultra
[ 9.676028][ T117] usb 1-1.2: Manufacturer: SanDisk
[ 9.681038][ T117] usb 1-1.2: SerialNumber: 4C530001230325109084
[ 9.687958][ T117] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 9.695510][ T117] scsi host6: usb-storage 1-1.2:1.0
[ 9.715851][ T106] ata6: SATA link down (SStatus 0 SControl F300)
[ 9.732201][ T1] md: Waiting for all devices to be available before autodetect
[ 9.739739][ T1] md: If you don't use raid, use raid=noautodetect
[ 9.746135][ T1] md: Autodetecting RAID arrays.
[ 9.750950][ T1] md: autorun ...
[ 9.754470][ T1] md: ... autorun DONE.
[ 9.759111][ T1] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[ 9.767401][ T1] Please append a correct "root=" boot option; here are the available partitions:
[ 9.776566][ T1] 1f00 512 mtdblock0
[ 9.776575][ T1] (driver?)
[ 9.784586][ T1] 1f01 2048 mtdblock1
[ 9.784595][ T1] (driver?)
[ 9.792556][ T1] 1f02 1280 mtdblock2
[ 9.792563][ T1] (driver?)
[ 9.800564][ T1] 1f03 64 mtdblock3
[ 9.800571][ T1] (driver?)
[ 9.808573][ T1] 1f04 128 mtdblock4
[ 9.808581][ T1] (driver?)
[ 9.816585][ T1] 1f05 64 mtdblock5
[ 9.816594][ T1] (driver?)
[ 9.824585][ T1] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 9.833591][ T1] CPU: 0 PID: 1 Comm: swapper Not tainted 5.13.6-kirkwood-tld-1 #1.0
[ 9.841550][ T1] Hardware name: Marvell Kirkwood (Flattened Device Tree)
[ 9.848552][ T1] [<8010e0a4>] (unwind_backtrace) from [<8010a8ac>] (show_stack+0x10/0x14)
[ 9.857047][ T1] [<8010a8ac>] (show_stack) from [<80afddf4>] (panic+0xfc/0x328)
[ 9.864669][ T1] [<80afddf4>] (panic) from [<81101ad0>] (mount_block_root+0x1e0/0x26c)
[ 9.872900][ T1] [<81101ad0>] (mount_block_root) from [<81101c4c>] (mount_root+0xf0/0x120)
[ 9.881472][ T1] [<81101c4c>] (mount_root) from [<81101dc0>] (prepare_namespace+0x144/0x180)
[ 9.890218][ T1] [<81101dc0>] (prepare_namespace) from [<811015e4>] (kernel_init_freeable+0x1d0/0x234)
[ 9.899836][ T1] [<811015e4>] (kernel_init_freeable) from [<80b091cc>] (kernel_init+0x8/0x118)
[ 9.908765][ T1] [<80b091cc>] (kernel_init) from [<80100148>] (ret_from_fork+0x14/0x2c)
[ 9.917075][ T1] Exception stack(0x814a5fb0 to 0x814a5ff8)
[ 9.922849][ T1] 5fa0: 00000000 00000000 00000000 00000000
[ 9.931763][ T1] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.940673][ T1] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 9.948024][ T1] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
