Iomega EZ media

Looking for assistance, with light experience toying with RPis, debian distros, etc.
Ive done a lot of reading and some attempts trying to boot via USB with kirkwood 5.9 rootfs with no luck. From memory, I think it bricked during an upgrade attempt.
Sounds like I need to deal with UBoot and not really sure of the direction to take.
Red light is all Im getting.
Thoughts, directions, links?

I think this is the thread you should read. If you have serial console, it should be easy.

https://forum.doozan.com/read.php?2,15887,page=1

This thread should be helpful as well

https://gist.github.com/braian87b/b5a4c5f20d1112473c470b096df766a3?permalink_comment_id=3319945



Edited 1 time(s). Last edit at 09/29/2022 10:40PM by daviddyer.

Thanks david,
Yeah I've been studying those two among others.
I only have ethernet connection currently and have attempted USB boot with debian and the Lenovo foss lifeline, with no luck.
I have to assume that my confusion might be my need for a serial connection and boot corruption.
Serial my best root to success or is there a technique that I can try in the meantime?

toddmax,

> Serial my best root to success or is there a
> technique that I can try in the meantime?

Serial console is the easiest way to get it boot to Debian. Witthout it, we cannot see what's going on (especially if u-boot envs were corrupted).

-bodhi
===========================
Forum Wiki
bodhi's corner