Zyxel NAS 325 stuck on uboot 2017 ?? November 18, 2022 02:19AM |
Registered: 1 year ago Posts: 28 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 18, 2022 02:54AM |
Admin Registered: 13 years ago Posts: 18,898 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 18, 2022 03:19AM |
Registered: 1 year ago Posts: 28 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 18, 2022 03:47AM |
Admin Registered: 13 years ago Posts: 18,898 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 18, 2022 04:48AM |
Registered: 1 year ago Posts: 28 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 18, 2022 02:24PM |
Admin Registered: 13 years ago Posts: 18,898 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 18, 2022 10:41PM |
Registered: 1 year ago Posts: 28 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 19, 2022 06:04AM |
Registered: 1 year ago Posts: 28 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 19, 2022 02:40PM |
Admin Registered: 13 years ago Posts: 18,898 |
printenv ping <router IP>
boot
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 20, 2022 02:41PM |
Registered: 1 year ago Posts: 28 |
Quote
Looks uEnv.txt is missing.
Quote
Please be so kind to advice how to interrupt console and get boot output??
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 20, 2022 04:16PM |
Admin Registered: 13 years ago Posts: 18,898 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 21, 2022 01:21AM |
Registered: 1 year ago Posts: 28 |
� U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:42:03 -0700) ZyXEL NSA325 2-Bay Power Media Server SoC: Kirkwood 88F6282_A1 DRAM: 512 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 MV88E1318 PHY initialized on egiga0 Hit any key to stop autoboot: 10 9 8 7 6 5 4 3 2 1 0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... Use USB retry period from the environment: 15 second(s) 1 Storage Device(s) found Reset IDE: ide_preinit failed Unknown command 'mmc' - try 'help' Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 7829504 2e310136-01 83 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 loading envs from usb 0 ... ** File not found /boot/uEnv.txt ** no IDE devices available Unknown command 'mmc' - try 'help' running scan_disk ... Scan device usb device usb 0:1 1 bytes read in 754 ms (0 Bytes/s) Found bootable drive on usb 0 loading uImage ... 5798304 bytes read in 1180 ms (4.7 MiB/s) loading uInitrd ... 10253281 bytes read in 1241 ms (7.9 MiB/s) loading DTB /boot/dts/kirkwood-pogo_e02.dtb ... 10114 bytes read in 3813 ms (2 KiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-6.0.7-kirkwood-tld-1 Created: 1970-01-01 0:07:25 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5798240 Bytes = 5.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-6.0.7-kirkwood-tld-1 Created: 1970-01-01 0:07:34 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 10253217 Bytes = 9.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01c00000 Booting using the fdt blob at 0x1c00000 Loading Kernel Image ... OK Loading Ramdisk to 1f146000, end 1fb0d3a1 ... OK Loading Device Tree to 1f140000, end 1f145781 ... OK Using machid 0x831 from environment Starting kernel ... [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 6.0.7-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1.0 PREEMPT Fri Nov 4 15:08:17 PDT 2022 [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: CloudEngines Pogoplug E02 [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] Zone ranges: [ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000][ T0] Movable zone start for each node [ 0.000000][ T0] Early memory node ranges [ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) [ 0.000000][ T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000][ T0] Memory: 489288K/524288K available (11264K kernel code, 1646K rwdata, 5076K rodata, 1024K init, 298K bss, 35000K reserved, 0K cma-reserved) [ 0.000000][ T0] trace event string verifier disabled [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled. [ 0.000000][ T0] Tracing variant of Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000001][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.000039][ T0] Switching to timer-based delay loop, resolution 5ns [ 0.001300][ T0] Console: colour dummy device 80x30 [ 0.001352][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000) [ 0.001376][ T0] pid_max: default: 32768 minimum: 301 [ 0.001928][ T0] LSM: Security Framework initializing [ 0.002273][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.002301][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.003902][ T0] CPU: Testing write buffer coherency: ok [ 0.006405][ T1] cblist_init_generic: Setting adjustable number of callback queues. [ 0.006420][ T1] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.006728][ T1] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.007152][ T1] Setting up static identity map for 0x100000 - 0x100058 [ 0.007402][ T1] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1 [ 0.007737][ T1] rcu: Hierarchical SRCU implementation. [ 0.007749][ T1] rcu: Max phase no-delay instances is 1000. [ 0.009283][ T1] devtmpfs: initialized [ 0.014936][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.014970][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.015185][ T1] prandom: seed boundary self test passed [ 0.018369][ T1] prandom: 100 self tests passed [ 0.018381][ T1] pinctrl core: initialized pinctrl subsystem [ 0.020662][ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.021273][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.022432][ T1] audit: initializing netlink subsys (disabled) [ 0.024081][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 0.024455][ T16] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 [ 0.024575][ T1] cpuidle: using governor ladder [ 0.024648][ T1] cpuidle: using governor menu [ 0.025078][ T1] Feroceon L2: Enabling L2 [ 0.025108][ T1] Feroceon L2: Cache support initialised. [ 0.031496][ T1] No ATAGs? [ 0.400052][ T1] raid6: int32x8 gen() 150 MB/s [ 0.740049][ T1] raid6: int32x4 gen() 129 MB/s [ 1.080077][ T1] raid6: int32x2 gen() 181 MB/s [ 1.420051][ T1] raid6: int32x1 gen() 130 MB/s [ 1.420062][ T1] raid6: using algorithm int32x2 gen() 181 MB/s [ 1.760048][ T1] raid6: .... xor() 114 MB/s, rmw enabled [ 1.760057][ T1] raid6: using intx1 recovery algorithm [ 1.760781][ T1] SCSI subsystem initialized [ 1.761356][ T1] usbcore: registered new interface driver usbfs [ 1.761412][ T1] usbcore: registered new interface driver hub [ 1.761456][ T1] usbcore: registered new device driver usb [ 1.761711][ T1] pps_core: LinuxPPS API ver. 1 registered [ 1.761718][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.761740][ T1] PTP clock support registered [ 1.763222][ T1] vgaarb: loaded [ 1.763842][ T1] clocksource: Switched to clocksource orion_clocksource [ 1.764882][ T1] VFS: Disk quotas dquot_6.6.0 [ 1.764956][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.784477][ T1] NET: Registered PF_INET protocol family [ 1.784739][ T1] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.786692][ T1] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.786859][ T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.786884][ T1] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 1.786947][ T1] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 1.787000][ T1] TCP: Hash tables configured (established 4096 bind 4096) [ 1.787243][ T1] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.787320][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.787348][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.787577][ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.794217][ T1] RPC: Registered named UNIX socket transport module. [ 1.794228][ T1] RPC: Registered udp transport module. [ 1.794233][ T1] RPC: Registered tcp transport module. [ 1.794237][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.794247][ T1] PCI: CLS 0 bytes, default 32 [ 1.794395][ T1] NetWinder Floating Point Emulator V0.97 (double precision) [ 1.795612][ T30] Trying to unpack rootfs image as initramfs... [ 3.086900][ T1] Initialise system trusted keyrings [ 3.087018][ T1] Key type blacklist registered [ 3.087986][ T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 3.088108][ T1] zbud: loaded [ 3.089959][ T1] NFS: Registering the id_resolver key type [ 3.090010][ T1] Key type id_resolver registered [ 3.090017][ T1] Key type id_legacy registered [ 3.090061][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.090076][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 3.090471][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 3.090864][ T1] fuse: init (API version 7.36) [ 3.091345][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 3.091519][ T1] orangefs_init: module version upstream loaded [ 3.091528][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled [ 3.209352][ T30] Freeing initrd memory: 10016K [ 3.225056][ T1] xor: measuring software checksum speed [ 3.231674][ T1] arm4regs : 1492 MB/sec [ 3.242688][ T1] 8regs : 895 MB/sec [ 3.250454][ T1] 32regs : 1270 MB/sec [ 3.250462][ T1] xor: using function: arm4regs (1492 MB/sec) [ 3.250738][ T1] async_tx: api initialized (async) [ 3.250760][ T1] Key type asymmetric registered [ 3.250766][ T1] Asymmetric key parser 'x509' registered [ 3.280597][ T1] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 3.280790][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 3.280920][ T1] io scheduler bfq registered [ 3.424877][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 3.427356][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 3.484819][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 3.487936][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 3.544833][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 3.548174][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 3.549539][ T1] printk: console [ttyS0] disabled [ 3.549616][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A [ 4.394100][ T1] printk: console [ttyS0] enabled [ 4.407368][ T1] loop: module loaded [ 4.412169][ T1] nand: device found, Manufacturer ID: 0x92, Chip ID: 0xf1 [ 4.419308][ T1] nand: Eon NAND 128MiB 3,3V 8-bit [ 4.424322][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 4.432647][ T1] Scanning device for bad blocks [ 4.442831][ T1] Bad eraseblock 100 at 0x000000c80000 [ 4.453478][ T1] Bad eraseblock 200 at 0x000001900000 [ 4.502384][ T1] 4 cmdlinepart partitions found on MTD device orion_nand [ 4.509393][ T1] Creating 4 MTD partitions on "orion_nand": [ 4.515273][ T1] 0x000000000000-0x000000100000 : "u-boot" [ 4.521531][ T1] 0x000000100000-0x000000500000 : "uImage" [ 4.527769][ T1] 0x000000500000-0x000002500000 : "rootfs" [ 4.534078][ T1] 0x000002500000-0x000008000000 : "data" [ 4.540794][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 4.549400][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. [ 4.562559][ T1] mdio_bus f1072004.mdio-bus-mii: MDIO device at address 0 is missing. [ 4.570915][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 4.579122][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.586445][ T1] ehci-pci: EHCI PCI platform driver [ 4.591659][ T1] ehci-orion: EHCI orion driver [ 4.596645][ T1] orion-ehci f1050000.ehci: EHCI Host Controller [ 4.602905][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 4.611544][ T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 4.643867][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 4.650928][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00 [ 4.659990][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.667970][ T1] usb usb1: Product: EHCI Host Controller [ 4.673569][ T1] usb usb1: Manufacturer: Linux 6.0.7-kirkwood-tld-1 ehci_hcd [ 4.680925][ T1] usb usb1: SerialNumber: f1050000.ehci [ 4.687127][ T1] hub 1-0:1.0: USB hub found [ 4.691638][ T1] hub 1-0:1.0: 1 port detected [ 4.697071][ T1] usbcore: registered new interface driver usb-storage [ 4.704267][ T1] mousedev: PS/2 mouse device common for all mice [ 4.983870][ T46] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 5.185550][ T46] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.32 [ 5.194504][ T46] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.202392][ T46] usb 1-1: Product: USB2.0 Hub [ 5.207842][ T46] hub 1-1:1.0: USB hub found [ 5.212678][ T46] hub 1-1:1.0: 4 ports detected [ 5.533862][ T46] usb 1-1.2: new high-speed USB device number 3 using orion-ehci [ 5.711677][ T46] usb 1-1.2: New USB device found, idVendor=148f, idProduct=5370, bcdDevice= 1.01 [ 5.720801][ T46] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.728861][ T46] usb 1-1.2: Product: 802.11 n WLAN [ 5.733960][ T46] usb 1-1.2: Manufacturer: Ralink [ 5.738874][ T46] usb 1-1.2: SerialNumber: 1.0 [ 5.763868][ T1] rtc-mv f1010300.rtc: internal RTC not ticking [ 5.770211][ T1] i2c_dev: i2c /dev entries driver [ 5.776028][ T1] device-mapper: uevent: version 1.0.3 [ 5.781671][ T1] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 5.791432][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 5.798774][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 5.806151][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 5.813583][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 5.820429][ T1] device-mapper: raid: Loading target version 1.15.1 [ 5.828375][ T1] hid: raw HID events driver (C) Jiri Kosina [ 5.834710][ T1] drop_monitor: Initializing network drop monitor service [ 5.842226][ T1] NET: Registered PF_INET6 protocol family [ 5.847984][ T46] usb 1-1.3: new high-speed USB device number 4 using orion-ehci [ 5.857023][ T1] Segment Routing with IPv6 [ 5.861407][ T1] RPL Segment Routing with IPv6 [ 5.866353][ T1] In-situ OAM (IOAM) with IPv6 [ 5.871138][ T1] NET: Registered PF_PACKET protocol family [ 5.877250][ T1] Key type dns_resolver registered [ 5.882887][ T1] registered taskstats version 1 [ 5.887784][ T1] Loading compiled-in X.509 certificates [ 5.894277][ T1] zswap: loaded using pool lzo/zbud [ 5.900035][ T1] Key type ._fscrypt registered [ 5.904881][ T1] Key type .fscrypt registered [ 5.909583][ T1] Key type fscrypt-provisioning registered [ 5.919827][ T1] Key type big_key registered [ 5.950154][ T1] Key type encrypted registered [ 6.023218][ T97] "cryptomgr_test" (97) uses obsolete ecb(arc4) skcipher [ 6.038934][ T46] usb 1-1.3: New USB device found, idVendor=13fe, idProduct=3600, bcdDevice= 1.00 [ 6.049215][ T46] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.063912][ T46] usb 1-1.3: Product: USB DISK 2.0 [ 6.068922][ T46] usb 1-1.3: Manufacturer: [ 6.083896][ T46] usb 1-1.3: SerialNumber: 07AB0F0890704765 [ 6.104391][ T46] usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 6.124143][ T46] usb-storage 1-1.3:1.0: Quirks match for vid 13fe pid 3600: 4000 [ 6.132014][ T46] scsi host0: usb-storage 1-1.3:1.0 [ 7.205374][ T30] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 7.225831][ T20] sd 0:0:0:0: [sda] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB) [ 7.245203][ T20] sd 0:0:0:0: [sda] Write Protect is off [ 7.263879][ T20] sd 0:0:0:0: [sda] No Caching mode page found [ 7.269927][ T20] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 7.290665][ T20] sda: sda1 [ 7.304234][ T20] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 7.828249][ T1] Freeing unused kernel image (initmem) memory: 1024K [ 7.854477][ T1] Checked W+X mappings: passed, no W+X pages found [ 7.860880][ T1] Run /init as init process Loading, please wait... Starting version 247.3-6 [ 8.678942][ T139] usbcore: registered new interface driver uas Begin: Loading essential drivers ... done. [ 19.044174][ T53] platform mv643xx_eth_port.0: deferred probe pending Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.36.1 [/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1 rootfs: recovering journal rootfs: clean, 18699/244800 files, 314663/978688 blocks done. [ 19.794425][ T163] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 19.989550][ T163] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.96 booting Using makefile-style concurrent boot in runlevel S. Setting hostname to 'debian'...done. Starting hotplug events dispatcher: systemd-udevd. Synthesizing the initial hotplug events (subsystems)...done. Synthesizing the initial hotplug events (devices)...done. Waiting for /dev to be fully populated...[ 22.634216][ T351] orion_wdt: Initial timeout 21 sec [ 23.014382][ T355] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.090194][ T346] marvell-cesa f1030000.crypto: CESA device successfully registered [ 23.315624][ T350] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 23.519376][ T350] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 23.527016][ T53] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 23.538440][ T53] cfg80211: failed to load regulatory.db [ 23.763882][ T350] usb 1-1.2: reset high-speed USB device number 3 using orion-ehci [ 23.934803][ T350] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected [ 23.972803][ T350] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected [ 23.988414][ T350] usbcore: registered new interface driver rt2800usb [ 24.148873][ T355] rt2800usb 1-1.2:1.0 wlx00e08c5370e0: renamed from wlan0 done. Activating swap:. [ 24.947853][ T496] EXT4-fs (sda1): re-mounted. Quota mode: none. Will now check all file systems. Checking all file systems. LABEL=rootfs is mounted Done checking file systems. Log is being saved in /var/log/fsck/checkfs if that location is writable. Cleaning up temporary files...Cl[ 26.399838][ T111] random: crng init done eaning /tmp...done. /tmp. Will now mount local filesystems:. Will now activate swapfile swap, if any:done. Checking minimum space in /tmp...done. Cleaning up temporary files.... Starting Setting kernel variables: sysctl. Initializing random number generator...done. Configuring network interfaces...ifquery: /etc/network/interfaces:4: misplaced option ifquery: couldn't read interfaces file "/etc/network/interfaces" ifquery: /etc/network/interfaces:4: misplaced option ifquery: couldn't read interfaces file "/etc/network/interfaces" ifup: /etc/network/interfaces:4: misplaced option ifup: couldn't read interfaces file "/etc/network/interfaces" [31mfailed.[39;49m Starting RPC port mapper daemon: rpcbind. Starting NFS common utilities: statd idmapd. Cleaning up temporary files.... INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 970 (syslogd) . Starting NFS common utilities: statd idmapd. Starting system message bus: dbus. Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. Not starting NFS kernel daemon: no exports. ... [33m(warning).[39;49m Starting NTP server: ntpd. Starting OpenBSD Secure Shell server: sshd. Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1012 (klogd) . Running local boot scripts (/etc/rc.local) �. Debian GNU/Linux 11 debian ttyS0 debian login: root Password: Linux debian 6.0.7-kirkwood-tld-1 #1.0 PREEMPT Fri Nov 4 15:08:17 PDT 2022 armv5tel The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Wed Dec 31 16:01:08 PST 1969 on ttyS0 debian CloudEngines Pogoplug E02 Linux version 6.0.7-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1.0 PREEMPT Fri Nov 4 15:08:17 PDT 2022 Debian 11.0 Wed Dec 31 16:00:37 PST 1969 up 0 minutes [?2004hroot@debian:~# printenv [?2004l SHELL=/bin/bash PWD=/root LOGNAME=root MOTD_SHOWN=pam HOME=/root LANG=C TERM=linux USER=root SHLVL=1 HUSHLOGIN=FALSE PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin MAIL=/var/mail/root _=/usr/bin/printenv [?2004hroot@debian:~#
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 21, 2022 02:21PM |
Admin Registered: 13 years ago Posts: 18,898 |
setenv dtb_file '/boot/dts/kirkwood-nsa325.dtb'
printenv boot
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 22, 2022 02:35AM |
Registered: 1 year ago Posts: 28 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 22, 2022 01:49PM |
Admin Registered: 13 years ago Posts: 18,898 |
Quote
https://forum.doozan.com/read.php?2,12096
=======================================================================
Updated 26 Sept 2021:
Basic Debian bullseye Kirkwood rootfs for most Kirwood plugs:
- tarball size: 234M
- install size: 668M
- The init system used in this rootfs is sysvinit . To boot with systemd, see Notes below.
- Installed packages: nano, avahi, ntp, busybox-syslogd (log to RAM), htop, isc-dhcp-client, dialog, bzip2, nfs server/client, iperf, ethtool, sysvinit-core, sysvinit, sysvinit-utils, u-boot-tools, and mtd-utils.
- see LED controls examples in /etc/rc.local, and /etc/init.d/halt
- see some useful aliases in /root/.profile
- root password: root
Important Correction:
After releasing this rootfs,
1. I realized I've missed one package that needs to be installed in order to make fw_printenv and fw_setenv available (these binaries have been moved to package libubootenv-tool in bullseye) . So do this if you want to list or set envs in Debian.
apt-get install libubootenv-tool
2. There was an obsolete source in /etc/apt/source.list. Please change the old security repo to
deb https://security.debian.org/debian-security bullseye-security main contrib non-free
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 23, 2022 07:02AM |
Registered: 1 year ago Posts: 28 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 23, 2022 01:49PM |
Admin Registered: 13 years ago Posts: 18,898 |
Quote
Debian Desktop
XFCE desktop Pogoplug Debian
LXDE / XFCE Desktop on HP T5325 (Kirkwood)
Pogoplug Debian with XDM display manager
Linux Logo
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 24, 2022 02:15PM |
Registered: 1 year ago Posts: 28 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 24, 2022 02:34PM |
Admin Registered: 13 years ago Posts: 18,898 |
Quote
Booting Debian on Pogoplug
Booting with uEnv.txt (to fix messed up U-Boot envs or corrupted NAND envs area)
dtb_file=/boot/dts/kirkwood-nsa325.dtb devices=usb bootdev=usb
e2label /dev/sdb1 usb_rootfsand then modify this variable in uEnv.txt:
set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=usb_rootfs rootdelay=10 $mtdparts $custom_params
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 24, 2022 03:52PM |
Registered: 1 year ago Posts: 28 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 24, 2022 04:11PM |
Admin Registered: 13 years ago Posts: 18,898 |
Quote
Wiki thread
Backup and Cloning rootfs
Back up a live rootfs using rsync
CrashPlan 4.3.0
Backup/Restore rootfs using tar command
Adjust udev rules after cloning rootfs
Stock Pogoplug rootfs
How to clone a rootfs from one Kirkwood box to another: Step 1 and Step 2
How to clone SATA rootfs to USB rootfs
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 25, 2022 01:47AM |
Registered: 1 year ago Posts: 28 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 25, 2022 01:54PM |
Admin Registered: 13 years ago Posts: 18,898 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 27, 2022 12:20PM |
Registered: 1 year ago Posts: 28 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 27, 2022 03:30PM |
Admin Registered: 13 years ago Posts: 18,898 |
Quote
Backup and Cloning rootfs
......
How to clone SATA rootfs to USB rootfs
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 27, 2022 03:30PM |
Admin Registered: 13 years ago Posts: 18,898 |
mkdir -p /media/sdb1 mount -o noatime /dev/sdb1 /media/sdb1 e2label /dev/sdb1 rootfs
cd /media/sdb1 time tar -xjf /boot/my-rootfs.tar.bz2After it is done, sync a few times
sync sync
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 28, 2022 04:43PM |
Registered: 1 year ago Posts: 28 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 28, 2022 04:53PM |
Admin Registered: 13 years ago Posts: 18,898 |
Quote
Media Streaming
OpenMediaVault
Debian Stretch and OMV4
...........
Quote
NFS
NFS - HowTo set up NFS shares (and boot NFS rootfs)
Boot your Dockstar (and other plugs) using NFS rootfs
Increase NFSD max_block_size
Reduce NFS threads
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 29, 2022 02:43AM |
Registered: 1 year ago Posts: 28 |
Re: Zyxel NAS 325 stuck on uboot 2017 ?? November 29, 2022 02:25PM |
Admin Registered: 13 years ago Posts: 18,898 |