System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 15, 2023 02:46PM |
Registered: 4 years ago Posts: 60 |
Quote
System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 15, 2023 03:24PM |
Admin Registered: 13 years ago Posts: 19,010 |
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 15, 2023 05:52PM |
Registered: 4 years ago Posts: 60 |
OX820> printenv bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm 0x60500000 0x60e00000 0x62c00000; else bootm 0x60500000 0x60e00000; fi; else if run load_dtb; then bootm 0x60500000 - 0x62c00000; else bootm 0x60500000; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb device=0:1 devices=usb ide disks=0 1 2 3 dtb_file=/boot/dts/ox820-pogoplug-pro.dtb ethact=dwmac.40400000 ethaddr=00:25:31:xx:xx:xx if_netconsole=ping $serverip ipaddr=10.1.1.197 load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device 0x62c00000 $dtb_file load_initrd=echo loading uInitrd ...; load $bootdev $device 0x60e00000 /boot/uInitrd load_uimage=echo loading uImage ...; load $bootdev $device 0x60500000 /boot/uImage mainlineLinux=yes mtdids=nand0=41000000.nand mtdparts=mtdparts=41000000.nand-controller:14m(boot),-(data) nc_ready=0 preboot=run preboot_nc preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 0x60500000 /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done serverip=10.1.1.1 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_import=echo importing envs ...; env import -t 0x60510000 $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x60500000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_custom_params=zswap.enabled=1 usb_ready_retry=15 Environment size: 2761/131068 bytes OX820>
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 Speed: 1000, full duplex Using dwmac.40400000 device ping failed; host 10.1.1.1 is not alive Speed: 1000, full duplex Using dwmac.40400000 device host 10.1.1.1 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 10.1.1.1 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 10.1.1.1 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 10.1.1.1 is alive Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.4.224-oxnas-tld-1 (root@tldDebian) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1.0 SMP PREEMPT Mon Nov 14 15:48:26 PST 2022 [ 0.000000][ T0] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000][ T0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000][ T0] OF: fdt: Machine model: Pogoplug V3 Pro [ 0.000000][ T0] Memory policy: Data cache writealloc [ 0.000000][ T0] percpu: Embedded 15 pages/cpu s30636 r8192 d22612 u61440 [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand-controller:14m(boot),-(data) [ 0.000000][ T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000][ T0] Memory: 110676K/131072K available (8192K kernel code, 234K rwdata, 2068K rodata, 1024K init, 258K bss, 20396K reserved, 0K cma-reserved) [ 0.000000][ T0] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 32 irqs, parent IRQ: 16 [ 0.000020][ T0] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns [ 0.000051][ T0] clocksource: oxnas_rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns [ 0.000066][ T0] timer_oxnas_rps: Registered clocksource rate 390625Hz [ 0.000094][ T0] timer_oxnas_rps: Registered clock event rate 6250000Hz prescaler 0 period 62500 [ 0.000256][ T0] GIC: PPI13 is secure or misconfigured [ 0.000314][ T0] GIC: PPI13 is secure or misconfigured [ 0.000634][ T0] Console: colour dummy device 80x30 [ 0.000711][ T0] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744) [ 0.050403][ T0] pid_max: default: 32768 minimum: 301 [ 0.051115][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.051141][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.051412][ T0] *** VALIDATE tmpfs *** [ 0.052769][ T0] *** VALIDATE proc *** [ 0.052989][ T0] *** VALIDATE cgroup1 *** [ 0.053015][ T0] *** VALIDATE cgroup2 *** [ 0.053212][ T0] CPU: Testing write buffer coherency: ok [ 0.055677][ T1] Setting up static identity map for 0x60100000 - 0x60100038 [ 0.056010][ T1] rcu: Hierarchical SRCU implementation. [ 0.057044][ T1] smp: Bringing up secondary CPUs ... [ 0.058337][ T0] GIC: PPI13 is secure or misconfigured [ 0.110668][ T1] smp: Brought up 1 node, 2 CPUs [ 0.110707][ T1] SMP: Total of 2 processors activated (678.29 BogoMIPS). [ 0.111892][ T1] devtmpfs: initialized [ 0.118371][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.118435][ T1] futex hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.118589][ T1] prandom: seed boundary self test passed [ 0.122892][ T1] prandom: 100 self tests passed [ 0.122913][ T1] pinctrl core: initialized pinctrl subsystem [ 0.125012][ T1] NET: Registered protocol family 16 [ 0.126796][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.129912][ T1] cpuidle: using governor ladder [ 0.129991][ T1] cpuidle: using governor menu [ 6.082112][ T1] vgaarb: loaded [ 6.083072][ T1] SCSI subsystem initialized [ 6.083921][ T1] usbcore: registered new interface driver usbfs [ 6.084078][ T1] usbcore: registered new interface driver hub [ 6.084160][ T1] usbcore: registered new device driver usb [ 6.084462][ T1] pps_core: LinuxPPS API ver. 1 registered [ 6.084480][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 6.084513][ T1] PTP clock support registered [ 6.086236][ T1] clocksource: Switched to clocksource oxnas_rps_clocksource_timer [ 6.086292][ T1] *** VALIDATE bpf *** [ 6.086809][ T1] *** VALIDATE ramfs *** [ 6.106667][ T1] NET: Registered protocol family 2 [ 6.106928][ T1] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 6.107947][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 6.108267][ T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 6.108318][ T1] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 6.108354][ T1] TCP: Hash tables configured (established 1024 bind 1024) [ 6.108595][ T1] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 6.108651][ T1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 6.108966][ T1] NET: Registered protocol family 1 [ 6.110220][ T1] RPC: Registered named UNIX socket transport module. [ 6.110246][ T1] RPC: Registered udp transport module. [ 6.110259][ T1] RPC: Registered tcp transport module. [ 6.110272][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.110295][ T1] PCI: CLS 0 bytes, default 32 [ 6.110753][ T1] Unpacking initramfs... [ 6.845189][ T1] Freeing initrd memory: 6288K [ 6.846673][ T1] Initialise system trusted keyrings [ 6.846801][ T1] Key type blacklist registered [ 6.847234][ T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 6.860152][ T1] zbud: loaded [ 6.865914][ T1] NFS: Registering the id_resolver key type [ 6.866004][ T1] Key type id_resolver registered [ 6.866022][ T1] Key type id_legacy registered [ 6.866053][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 6.866071][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 6.866086][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 6.867765][ T1] fuse: init (API version 7.31) [ 6.867985][ T1] *** VALIDATE fuse *** [ 6.868016][ T1] *** VALIDATE fuse *** [ 6.868986][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 6.869347][ T1] orangefs_init: module version upstream loaded [ 6.918599][ T1] Key type asymmetric registered [ 6.918632][ T1] Asymmetric key parser 'x509' registered [ 6.918727][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 6.926295][ T1] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 6.927918][ T1] printk: console [ttyS0] disabled [ 6.928089][ T1] 44200000.serial: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A [ 7.566059][ T1] printk: console [ttyS0] enabled [ 7.586265][ T1] loop: module loaded [ 7.592476][ T1] scsi host0: sata_oxnas [ 7.597358][ T1] ata1: SATA max UDMA/133 irq 57 [ 7.602268][ T75] sata_oxnas: resetting SATA core [ 7.666593][ T1] Could not find a valid ONFI parameter page, trying bit-wise majority to recover it [ 7.676006][ T1] ONFI parameter recovery failed, aborting [ 7.681715][ T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 7.688770][ T1] nand: Hynix NAND 128MiB 3,3V 8-bit [ 7.693890][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 7.702228][ T1] Scanning device for bad blocks [ 7.788794][ T1] 2 cmdlinepart partitions found on MTD device 41000000.nand-controller [ 7.796974][ T1] Creating 2 MTD partitions on "41000000.nand-controller": [ 7.804001][ T1] 0x000000000000-0x000000e00000 : "boot" [ 7.810485][ T1] 0x000000e00000-0x000008000000 : "data" [ 7.818137][ T1] oxnas-dwmac 40400000.ethernet: IRQ eth_lpi not found [ 7.825021][ T1] oxnas-dwmac 40400000.ethernet: PTP uses main clock [ 7.831608][ T1] oxnas-dwmac 40400000.ethernet: no reset control found [ 7.906677][ T1] oxnas-dwmac 40400000.ethernet: User ID: 0x12, Synopsys ID: 0x35 [ 7.914321][ T1] oxnas-dwmac 40400000.ethernet: DWMAC1000 [ 7.920102][ T1] oxnas-dwmac 40400000.ethernet: DMA HW capability register supported [ 7.928107][ T1] oxnas-dwmac 40400000.ethernet: RX Checksum Offload Engine supported [ 7.936079][ T1] oxnas-dwmac 40400000.ethernet: COE Type 2 [ 7.941829][ T1] oxnas-dwmac 40400000.ethernet: TX Checksum insertion supported [ 7.948116][ T75] ata1: SATA link down (SStatus 0 SControl 310) [ 7.949396][ T1] oxnas-dwmac 40400000.ethernet: Wake-Up On Lan supported [ 7.962393][ T1] oxnas-dwmac 40400000.ethernet: Enhanced/Alternate descriptors [ 7.969873][ T1] oxnas-dwmac 40400000.ethernet: Enabled extended descriptors [ 7.977185][ T1] oxnas-dwmac 40400000.ethernet: Ring mode enabled [ 7.983513][ T1] oxnas-dwmac 40400000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 7.992064][ T1] oxnas-dwmac 40400000.ethernet: device MAC address 72:2b:2e:7a:56:4a [ 8.044894][ T1] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [ 8.055144][ T1] mdio_bus stmmac-0:03: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:03, irq=POLL) [ 8.066493][ T1] PPP generic driver version 2.4.2 [ 8.071854][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.079170][ T1] ehci-pci: EHCI PCI platform driver [ 8.286295][ T1] oxnas-ehci 40200100.ehci: EHCI Host Controller [ 8.292561][ T1] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1 [ 8.301199][ T1] oxnas-ehci 40200100.ehci: irq 52, io mem 0x40200100 [ 8.336296][ T1] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00 [ 8.343303][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 8.352296][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.360217][ T1] usb usb1: Product: EHCI Host Controller [ 8.365767][ T1] usb usb1: Manufacturer: Linux 5.4.224-oxnas-tld-1 ehci_hcd [ 8.372989][ T1] usb usb1: SerialNumber: 40200100.ehci [ 8.379386][ T1] hub 1-0:1.0: USB hub found [ 8.383895][ T1] hub 1-0:1.0: 2 ports detected [ 8.389872][ T1] usbcore: registered new interface driver cdc_wdm [ 8.396492][ T1] usbcore: registered new interface driver usb-storage [ 8.403397][ T1] usbcore: registered new interface driver usbserial_generic [ 8.410688][ T1] usbserial: USB Serial support registered for generic [ 8.418048][ T1] mousedev: PS/2 mouse device common for all mice [ 8.424422][ T1] i2c /dev entries driver [ 8.430187][ T1] hidraw: raw HID events driver (C) Jiri Kosina [ 8.436523][ T1] usbcore: registered new interface driver usbhid [ 8.442762][ T1] usbhid: USB HID core driver [ 8.449259][ T1] NET: Registered protocol family 10 [ 8.456340][ T1] Segment Routing with IPv6 [ 8.460851][ T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 8.469806][ T1] NET: Registered protocol family 17 [ 8.475353][ T1] Key type dns_resolver registered [ 8.481052][ T1] registered taskstats version 1 [ 8.485831][ T1] Loading compiled-in X.509 certificates [ 8.491627][ T1] zswap: loaded using pool lzo/zbud [ 8.497351][ T1] Key type ._fscrypt registered [ 8.502044][ T1] Key type .fscrypt registered [ 8.596016][ T1] Key type big_key registered [ 8.639994][ T1] Key type encrypted registered [ 8.676318][ T21] usb 1-1: new high-speed USB device number 2 using oxnas-ehci [ 8.878182][ T21] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.64 [ 8.887098][ T21] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 8.894924][ T21] usb 1-1: Product: USB2.0 Hub [ 8.899601][ T87] oxnas-pcie 47c00000.pcie: PCIe version/deviceID 0x82510b5 [ 8.907220][ T87] oxnas-pcie 47c00000.pcie: link up [ 8.912849][ T87] oxnas-pcie 47c00000.pcie: PCI host bridge to bus 0000:00 [ 8.920230][ T21] hub 1-1:1.0: USB hub found [ 8.924736][ T87] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff] [ 8.932392][ T21] hub 1-1:1.0: 4 ports detected [ 8.937185][ T87] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref] [ 8.945277][ T87] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] [ 8.952916][ T87] pci_bus 0000:00: root bus resource [bus 00-7f] [ 8.959278][ T87] pci 0000:00:00.0: [1814:3090] type 00 class 0x028000 [ 8.966100][ T87] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0000ffff] [ 8.975088][ T87] PCI: bus0: Fast back to back transfers disabled [ 8.981447][ T87] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4800ffff] [ 8.989752][ T1] hctosys: unable to open rtc device (rtc0) [ 8.997611][ T1] Freeing unused kernel memory: 1024K [ 9.004121][ T1] Checked W+X mappings: passed, no W+X pages found [ 9.010508][ T1] Run /init as init process Loading, please wait... Starting version 247.3-7+deb11u1 [ 9.286336][ T87] usb 1-1.3: new high-speed USB device number 3 using oxnas-ehci [ 9.518727][ T87] usb 1-1.3: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04 [ 9.536345][ T87] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.544335][ T87] usb 1-1.3: Product: External USB 3.0 [ 9.566359][ T87] usb 1-1.3: Manufacturer: JMicron [ 9.571317][ T87] usb 1-1.3: SerialNumber: 201703310007F [ 9.695828][ T117] scsi host1: uas [ 9.704294][ T26] scsi 1:0:0:0: Direct-Access External USB3.0 0204 PQ: 0 ANSI: 6 [ 9.714342][ T117] usbcore: registered new interface driver uas [ 9.730552][ T7] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 9.752389][ T7] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 9.761305][ T7] sd 1:0:0:0: [sda] Write Protect is off [ 9.778920][ T7] sd 1:0:0:0: [sda] Disabling FUA [ 9.783810][ T7] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.831672][ T7] sd 1:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 10.358120][ T7] sda: sda1 sda2 [ 10.369431][ T7] sd 1:0:0:0: [sda] Attached SCSI disk Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.36.1 [/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1 rootfs: recovering journal rootfs: clean, 21864/1048576 files, 382514/4194304 blocks done. [ 21.007705][ T153] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 21.078942][ T153] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 21.736583][ T1] systemd[1]: System time before build time, advancing clock. [ 21.779799][ T1] systemd[1]: Inserted module 'autofs4' [ 21.808593][ T1] cgroup2: Unknown parameter 'memory_recursiveprot' [ 21.841556][ T1] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 21.872317][ T1] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 21.917760][ T1] systemd[1]: Set hostname to <PogoplugPro2>. [ 23.663196][ T1] systemd[1]: Queued start job for default target Graphical Interface. [ 23.674874][ T1] random: systemd: uninitialized urandom read (16 bytes read) [ 23.682769][ T1] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 23.695884][ T1] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 23.707192][ T1] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 23.746636][ T1] random: systemd: uninitialized urandom read (16 bytes read) [ 23.755328][ T1] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 23.796715][ T1] random: systemd: uninitialized urandom read (16 bytes read) [ 23.805427][ T1] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 23.847777][ T1] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 23.887395][ T1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 23.927339][ T1] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 23.969464][ T1] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount Arbitrary…s File System Automount Point. [ 24.017303][ T1] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 24.057548][ T1] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 24.097187][ T1] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 24.137052][ T1] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 24.179507][ T1] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 24.217845][ T1] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 24.257431][ T1] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 24.332382][ T1] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 24.342855][ T1] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 24.378245][ T1] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 24.418401][ T1] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 24.457832][ T1] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 24.497912][ T1] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 24.513167][ T1] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 24.551767][ T1] systemd[1]: Mounting RPC Pipe File System... Mounting RPC Pipe File System... [ 24.592724][ T1] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 24.627630][ T1] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 24.637568][ T1] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 24.655569][ T1] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 24.697715][ T1] random: systemd: uninitialized urandom read (16 bytes read) [ 24.711132][ T1] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 24.747681][ T1] random: systemd: uninitialized urandom read (16 bytes read) [ 24.760952][ T1] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 24.797619][ T1] random: systemd: uninitialized urandom read (16 bytes read) [ 24.811046][ T1] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 24.850634][ T1] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 24.861227][ T1] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 24.877831][ T1] systemd[1]: Starting Journal Service... Starting Journal Service... [ 24.928330][ T1] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 24.953822][ T1] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 25.014200][ T1] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 25.166630][ T193] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 25.204239][ T1] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 25.258641][ T1] systemd[1]: Mounted RPC Pipe File System. [ OK ] Mounted RPC Pipe File System. [ 25.279206][ T1] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 25.300746][ T1] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st… nodes for the current kernel. [ 25.385292][ T1] systemd[1]: modprobe@configfs.service: Succeeded. [ 25.394229][ T1] systemd[1]: Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module configfs. [ 25.438056][ T1] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Modules. [ OK ] Finished Remount Root and Kernel File Systems. Mounting FUSE Control File System... Mounting Kernel Configuration File System... Starting pNFS block layout mapping daemon... [ 25.725196][ T189] random: systemd-journal: uninitialized urandom read (16 bytes read) [ 25.748167][ T1] random: systemd: uninitialized urandom read (16 bytes read) Starting Flush Journal to Persistent Storage... [ 25.787929][ T1] random: systemd: uninitialized urandom read (16 bytes read) Starting Load/Save Random Seed... Starting Apply Kernel Variables... Starting Create System Users... [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ 26.048737][ T189] systemd-journald[189]: Received client request to flush runtime journal. [ OK ] Started pNFS block layout mapping daemon. [ 26.105571][ T189] systemd-journald[189]: File /var/log/journal/c4334d5b2fba8bce5294b56551baee86/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Mounting /tmp... Starting Rule-based Manage…for Device Events and Files... [ OK ] Mounted /tmp. [ OK ] Reached target Local File Systems. [ 26.727349][ T1] random: systemd: uninitialized urandom read (16 bytes read) Starting Preprocess NFS configuration... [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Preprocess NFS configuration. [ OK ] Reached target NFS client services. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. Starting Create Volatile Files and Directories... [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ 28.125923][ T213] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ OK ] Found device /dev/ttyS0. [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily man-db regeneration. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Avahi mDNS/DNS-SD Stack... Starting LSB: Starts syslogd... [ OK ] Started D-Bus System Message Bus. Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Network Time Service... Starting /etc/rc.local Compatibility... Starting Self Monitoring a…g Technology (SMART) Daemon... Starting OpenBSD Secure Shell server... [ 29.653588][ T213] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Starting User Login Management... [ 29.701473][ T128] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 29.715768][ T128] cfg80211: failed to load regulatory.db Starting Permit User Sessions... [ OK ] Started /etc/rc.local Compatibility. [ 29.928025][ T213] rt2800pci 0000:00:00.0: enabling device (0140 -> 0142) [ 29.971699][ T213] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3090, rev 3213 detected [ 30.000599][ T213] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected [ 30.116119][ T218] rt2800pci 0000:00:00.0 wlp0s0: renamed from wlan0 [ OK ] Started N268] proc: Bad value for 'hidepid' 1;39mPermit User Sessions. [ 31.036380][ C1] random: crng init done [ 31.040494][ C1] random: 123 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Started LSB: Starts syslogd. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Self Monitoring an…ing Technology (SMART) Daemon. [ OK ] Started User Login Management. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Starting LSB: Starts klogd... [ OK ] Started Getty on tty1. Starting Netatalk AFP fileserver for Macintosh clients... [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Started LSB: Starts klogd. Starting Load/Save RF Kill Switch Status... [ OK ] Started Netatalk AFP fileserver for Macintosh clients. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Finished Update UTMP about System Runlevel Changes. Debian GNU/Linux 11 PogoplugPro2 ttyS0 PogoplugPro2 login:
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 15, 2023 06:26PM |
Admin Registered: 13 years ago Posts: 19,010 |
cat /etc/initramfs-tools/modules cat /etc/network/interfaces ifconfig -a
ifdown eth0 ifup eth0Note that you might not have eth0 when you are running systemd. It is likely named something else.
Asure
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 16, 2023 05:44AM |
System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus
How are you making the swap file? Where, and what are your steps to do this?Quote
The message above starts after I create a swap file and reboot the machine. All this is done via ssh.
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 16, 2023 03:35PM |
Registered: 4 years ago Posts: 60 |
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 16, 2023 03:42PM |
Registered: 4 years ago Posts: 60 |
> System has not been booted with systemd as init > system (PID 1). Can't operate. Failed to connect > to bus >>
> How are you making the swap file? Where, and whatQuote
The message above starts after I create a
> swap file and reboot the machine. All this is done
> via ssh.
service netatalk restartOnce I do that I got that error message and can no longer log in via SSH. Like I said yesterday, I CAN log in via serial console without issue.
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 16, 2023 04:55PM |
Registered: 4 years ago Posts: 60 |
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 16, 2023 05:14PM |
Registered: 4 years ago Posts: 60 |
> cat /etc/initramfs-tools/modules > cat /etc/network/interfaces > ifconfig -a >>
> ifdown eth0 > ifup eth0 >> Note that you might not have eth0 when you are
root@PogoplugPro2:~# ifdown eth0 ifdown: interface eth0 not configured root@PogoplugPro2:~# ifup eth0 [ 350.094814][ T342] oxnas-dwmac 40400000.ethernet eth0: PHY [stmmac-0:00] driver [Generic PHY] [ 350.108526][ T342] oxnas-dwmac 40400000.ethernet eth0: No Safety Features support found [ 350.116782][ T342] oxnas-dwmac 40400000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported [ 350.128261][ T342] oxnas-dwmac 40400000.ethernet eth0: registered PTP clock [ 350.135813][ T342] oxnas-dwmac 40400000.ethernet eth0: configuring for phy/rgmii link mode root@PogoplugPro2:~# [ 353.277288][ T295] oxnas-dwmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 353.286251][ T295] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 16, 2023 05:38PM |
Admin Registered: 13 years ago Posts: 19,010 |
/etc/init.d/netatalk restartSee if it will behave the same way.
ifdown eth0 ifup eth0
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 22, 2023 01:41PM |
Registered: 1 year ago Posts: 6 |
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 22, 2023 02:02PM |
Admin Registered: 13 years ago Posts: 19,010 |
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 22, 2023 05:18PM |
Registered: 1 year ago Posts: 6 |
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 23, 2023 03:19PM |
Registered: 4 years ago Posts: 60 |
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 23, 2023 03:28PM |
Admin Registered: 13 years ago Posts: 19,010 |
ls -lart /etc/ssh/
sshd_config ssh_config
ps -deaf | grep -i sshAnd ping the router (if is 192.168.0.1)
ping 192.168.0.1
dmesg cat /var/log/message
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 23, 2023 05:09PM |
Registered: 1 year ago Posts: 6 |
rsync -Pav root@<machineip>:/var/lib/lxc/<containername>/ /var/lib/lxc/<containername>/
/etc/init.d/ssh restart
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 23, 2023 05:25PM |
Registered: 1 year ago Posts: 6 |
drwxr-xr-x 1 root root 0 Jul 1 2022 sshd_config.d drwxr-xr-x 1 root root 0 Jul 1 2022 ssh_config.d -rw-r--r-- 1 root root 1650 Jul 1 2022 ssh_config -rw-r--r-- 1 root root 577771 Jul 1 2022 moduli -rw-r--r-- 1 root root 561 Jan 14 19:48 ssh_host_rsa_key.pub -rw------- 1 root root 2590 Jan 14 19:48 ssh_host_rsa_key -rw-r--r-- 1 root root 169 Jan 14 19:48 ssh_host_ecdsa_key.pub -rw------- 1 root root 492 Jan 14 19:48 ssh_host_ecdsa_key -rw-r--r-- 1 root root 89 Jan 14 19:48 ssh_host_ed25519_key.pub -rw------- 1 root root 399 Jan 14 19:48 ssh_host_ed25519_key -rw-r--r-- 1 root root 3309 Jan 14 21:33 sshd_config drwxr-xr-x 1 root root 344 Jan 14 21:33 . drwxr-xr-x 1 root root 2962 Mar 22 11:51 ..
root 2073 1 0 Mar22 ? 00:00:00 sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups 100000 2537 2372 0 Mar22 ? 00:00:01 sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups 100000 2974 2474 0 Mar22 ? 00:00:01 sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups root 3394 2924 0 Mar22 ? 00:00:00 sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups sshd 3746 2924 0 Mar22 ? 00:00:00 /usr/sbin/exim4 -bd -q30m root 3785 2073 0 Mar22 ? 00:00:00 sshd: root@pts/3 100000 3984 3855 0 Mar22 ? 00:00:01 sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups 100000 4443 3997 0 Mar22 ? 00:00:01 sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups 100000 4883 4459 0 Mar22 ? 00:00:01 sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups 100000 6222 6069 0 Mar22 ? 00:00:08 sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups 100000 6565 6418 0 Mar22 ? 00:00:02 sshd: /usr/sbin/sshd -D [listener] 1 of 10-100 startups root 16733 3394 0 Mar22 ? 00:07:55 sshd: root@notty root 17540 2924 0 Mar22 ? 00:00:00 /usr/bin/ssh-agent -s root 17642 2924 0 Mar22 ? 00:00:19 ssh -x -a -oClearAllForwardings=yes -ocompression=no -2 root@controlhost.internal -s sftp root 17647 2073 0 Mar22 ? 00:00:16 sshd: root@notty root 17713 17647 0 Mar22 ? 00:00:13 /usr/lib/openssh/sftp-server root 17714 2924 0 Mar22 ? 00:00:37 sshfs root@controlhost.internal:/ /mnt/mount_controlhost/ -o reconnect,compression=no,follow_symlinks,transform_symlinks root 17961 17907 0 Mar22 pts/5 00:00:00 ssh root@controlhost.internal root 17964 2073 0 Mar22 ? 00:00:00 sshd: root@pts/9 root 531151 531036 0 Mar22 pts/7 00:00:00 ssh root@controlhost.internal root 531152 2073 0 Mar22 ? 00:00:00 sshd: root@pts/11 100000 690050 689849 0 Mar22 ? 00:00:05 sshd: /usr/sbin/sshd -D [listener] 2 of 10-100 startups root 1622342 17907 0 14:05 pts/4 00:00:02 ssh root@controlhost.internal root 1622343 2073 0 14:05 ? 00:00:02 sshd: root@pts/12 100000 1688875 690050 0 15:09 ? 00:00:00 sshd: [accepted] 100000 1689596 6565 0 15:10 ? 00:00:00 sshd: [accepted] 100000 1690327 690050 0 15:11 ? 00:00:00 sshd: [accepted] root 1690338 1622350 0 15:11 pts/12 00:00:00 grep -i ssh
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_seq=1 ttl=64 time=0.831 ms 64 bytes from 192.168.0.1: icmp_seq=2 ttl=64 time=0.215 ms
1 ? 00:00:03 systemd 338 ? 00:00:00 systemd-journal 2372 ? 00:00:01 systemd 2442 ? 00:00:02 systemd-journal 2458 ? 00:00:00 systemd-udevd 2474 ? 00:00:01 systemd 2495 ? 00:00:00 systemd-logind 2564 ? 00:00:00 systemd 2755 ? 00:00:02 systemd-journal 2894 ? 00:00:00 systemd-udevd 2924 ? 00:00:01 systemd 2942 ? 00:00:00 systemd-logind 3025 ? 00:00:00 systemd 3237 ? 00:00:00 systemd-journal 3377 ? 00:00:00 systemd-logind 3378 ? 00:00:00 systemd-machine 3422 ? 00:00:00 systemd 3424 ? 00:00:00 systemd 3855 ? 00:00:01 systemd 3927 ? 00:00:02 systemd-journal 3943 ? 00:00:00 systemd-udevd 3967 ? 00:00:00 systemd-logind 3997 ? 00:00:01 systemd 4030 ? 00:00:00 systemd 4374 ? 00:00:02 systemd-journal 4393 ? 00:00:00 systemd-udevd 4416 ? 00:00:00 systemd-logind 4459 ? 00:00:01 systemd 4496 ? 00:00:00 systemd 4831 ? 00:00:02 systemd-journal 4846 ? 00:00:00 systemd-udevd 4873 ? 00:00:00 systemd-logind 4953 ? 00:00:00 systemd 5290 ? 00:00:00 systemd 6069 ? 00:00:02 systemd 6167 ? 00:00:20 systemd-journal 6181 ? 00:00:00 systemd-udevd 6182 ? 00:00:02 systemd-network 6210 ? 00:00:00 systemd-logind 6418 ? 00:00:02 systemd 6527 ? 00:00:08 systemd-journal 6536 ? 00:00:00 systemd-udevd 6539 ? 00:00:03 systemd-network 6554 ? 00:00:00 systemd-logind 689849 ? 00:00:04 systemd 689987 ? 00:00:19 systemd-journal 690001 ? 00:00:00 systemd-udevd 690002 ? 00:01:30 systemd-network 690047 ? 00:00:00 systemd-logind 1699735 ? 00:00:00 systemd-udevd
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 23, 2023 06:03PM |
Registered: 1 year ago Posts: 6 |
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 23, 2023 06:04PM |
Admin Registered: 13 years ago Posts: 19,010 |
ls -l /usr/bin ls -l /bin
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 23, 2023 06:59PM |
Registered: 1 year ago Posts: 6 |
Static hostname: host.gw Icon name: computer-desktop Chassis: desktop Machine ID: aad73c1b4418460d8376b84cfcb6c1d1 Boot ID: 92cffc5af66b4bc5b1571d18a5541e2b Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.10.0-19-amd64 Architecture: x86-64
Static hostname: proxy Icon name: computer-container Chassis: container Machine ID: 93dbc710e79343bda4e1fd39b36d68cf Boot ID: 3c6fca9c06a64b3e90ecedb3040c9bbf Virtualization: lxc Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.10.0-19-amd64 Architecture: x86-64
hostnamectl System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down
No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye
Linux host.gw.h0 5.10.0-21-amd64 #1 SMP Debian 5.10.162-1 (2023-01-21) x86_64 GNU/Linux
Quote
The tell is is if a binary foo exist on both folders as a real file (if the /usr merge is going on, /bin/foo should be a symlink).
lrwxrwxrwx 1 root root 7 Aug 28 2021 /bin -> usr/bin
lrwxrwxrwx 1 root root 7 Jan 14 19:44 /bin -> usr/bin
total 11976 -rwxr-xr-x 1 root root 1234376 Mar 27 2022 bash -rwxr-xr-x 1 root root 38984 Jul 20 2020 bunzip2 -rwxr-xr-x 1 root root 715480 Jul 25 2021 busybox -rwxr-xr-x 1 root root 38984 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep (truncated)
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 23, 2023 07:34PM |
Admin Registered: 13 years ago Posts: 19,010 |
Quote
On the older container /bin is NOT a symlink, and probably explains why the files appeared to double up.
Quote
Edit: But how? All I can think of are there's other symlinks under the conatiners /bin/ that may point to a larger number of files than are on the remote host, or it got into a loop when checking - it did take a very long time to count the files and I killed the count.
Quote
In any case, it's a mystery why doing the rsync and the deletion put systemd into a bad state.
Quote
What I'll do is make brand new containers rather than copy over the older ones.
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down March 31, 2023 03:46PM |
Registered: 4 years ago Posts: 32 |
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down April 02, 2023 11:38AM |
Registered: 4 years ago Posts: 60 |
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down April 02, 2023 11:42AM |
Registered: 4 years ago Posts: 60 |
> /etc/init.d/netatalk restart >> See if it will behave the same way.
> ifdown eth0 > ifup eth0 >
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down April 02, 2023 02:14PM |
Admin Registered: 13 years ago Posts: 19,010 |
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down April 03, 2023 12:07PM |
Registered: 4 years ago Posts: 60 |
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down April 10, 2023 12:19PM |
Registered: 4 years ago Posts: 60 |
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down May 10, 2023 01:50PM |
Registered: 4 years ago Posts: 60 |
Re: System has not been booted with systemd as init system (PID 1). Can't operate. Failed to connect to bus: Host is down May 12, 2023 06:57PM |
Admin Registered: 13 years ago Posts: 19,010 |