Help flashing to a Sheevaplug NAND October 18, 2023 06:06AM |
Registered: 1 year ago Posts: 11 |
apt-get install mtd-utils
root@sheevaplug:~# apt-get install mtd-utils Reading package lists... Done Building dependency tree... Done Reading state information... Done mtd-utils is already the newest version (1:2.1.5-1). mtd-utils set to manually installed. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. root@sheevaplug:~#
/usr/sbin/modprobe ubi
/usr/sbin/ubiformat /dev/mtd2 -s 512
root@sheevaplug:~# /usr/sbin/ubiformat /dev/mtd2 -s 512 ubiformat: mtd2 (nand), size 531628032 bytes (507.0 MiB), 4056 eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 2048 bytes libscan: scanning eraseblock 4055 -- 100 % complete ubiformat: 4055 eraseblocks have valid erase counter, mean value is 1 ubiformat: 1 bad eraseblocks found, numbers: 2854 ubiformat: formatting eraseblock 4055 -- 100 % complete root@sheevaplug:~#
/usr/sbin/ubiattach /dev/ubi_ctrl -m 2
root@sheevaplug:~# /usr/sbin/ubiattach /dev/ubi_ctrl -m 2 [ 183.188203] ubi0: attaching mtd2 [ 183.819624] ubi0: scanning is finished [ 183.848784] ubi0: attached mtd2 (name "root", size 507 MiB) [ 183.854457] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes [ 183.861403] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512 [ 183.868155] ubi0: VID header offset: 512 (aligned 512), data offset: 2048 [ 183.875011] ubi0: good PEBs: 4055, bad PEBs: 1, corrupted PEBs: 0 [ 183.881158] ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128 [ 183.888437] ubi0: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 728050822 [ 183.897554] ubi0: available PEBs: 3972, total reserved PEBs: 83, PEBs reserved for bad PEB handling: 79 [ 183.907057] ubi0: background thread "ubi_bgt0d" started, PID 334 UBI device number 0, total 4055 LEBs (523192320 bytes, 498.9 MiB), available 3972 LEBs (512483328 bytes, 488.7 MiB), LEB size 129024 bytes (126.0 KiB) root@sheevaplug:~#
/usr/sbin/ubimkvol /dev/ubi0 -N rootfs -m
root@sheevaplug:~# /usr/sbin/ubimkvol /dev/ubi0 -N rootfs -m Set volume size to 512483328 Volume ID 0, size 3972 LEBs (512483328 bytes, 488.7 MiB), LEB size 129024 bytes (126.0 KiB), dynamic, name "rootfs", alignment 1 root@sheevaplug:~#
mount -t ubifs ubi0:rootfs /mnt
root@sheevaplug:~# mount -t ubifs ubi0:rootfs /mnt [ 233.439620] UBIFS (ubi0:0): default file-system created [ 233.446912] UBIFS (ubi0:0): Mounting in unauthenticated mode [ 233.478930] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 360 [ 233.542937] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 233.550425] UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 233.560431] UBIFS (ubi0:0): FS size: 510418944 bytes (486 MiB, 3956 LEBs), max 3972 LEBs, journal size 25546752 bytes (24 MiB, 198 LEBs) [ 233.572786] UBIFS (ubi0:0): reserved for root: 4952683 bytes (4836 KiB) [ 233.579454] UBIFS (ubi0:0): media format: w5/r0 (latest is w5/r0), UUID 2BA446B8-3BF9-44E2-AAA0-7A29202B3F5A, small LPT model mount: (hint) your fstab has been modified, but systemd still uses the old version; use 'systemctl daemon-reload' to reload. mount: (hint) your fstab has been modified, but systemd still uses the old version; use 'systemctl daemon-reload' to reload. root@sheevaplug:~#
cp /etc/fstab /etc/fstab.bak
nano /etc/fstab
nano /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> /dev/root / ubifs defaults,noatime,rw 0 0 tmpfs /var/run tmpfs size=1M,rw,nosuid,mode=0755 0 0 tmpfs /var/lock tmpfs size=1M,rw,noexec,nosuid,nodev,mode=1777 0 0 tmpfs /tmp tmpfs defaults,nosuid,nodev 0 0
mkdir /tmp/rootfs
mount -o bind / /tmp/rootfs/
cd /tmp/rootfs
sync
cp -a . /mnt/
root@sheevaplug:/tmp/rootfs# cp -a . /mnt/ [ 1102.885700] usb 1-1: reset high-speed USB device number 2 using orion-ehci [ 1103.067693] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [ 1103.077024] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 18 e6 78 00 00 08 00 [ 1103.084434] I/O error, dev sda, sector 1631864 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 cp: preserving permissions for ‘/mnt/./var/log/journal/75e30cfb7de24a1aa004fabd2a8a8a68/system@000605c9542dfb52-1ac8dc41d880b815.journal~’: Operation not supported cp: preserving permissions for ‘/mnt/./var/log/journal/75e30cfb7de24a1aa004fabd2a8a8a68/system.journal’: Operation not supported cp: preserving permissions for ‘/mnt/./var/log/journal/75e30cfb7de24a1aa004fabd2a8a8a68/user-1000.journal’: Operation not supported cp: preserving permissions for ‘/mnt/./var/log/journal/75e30cfb7de24a1aa004fabd2a8a8a68’: Operation not supported cp: preserving permissions for ‘/mnt/./var/log/journal’: Operation not supported root@sheevaplug:/tmp/rootfs#
cp /etc/fstab.bak /etc/fstab
systemctl reboot
setenv serverip 192.168.0.205 #Host setenv ipaddr 192.168.0.201 #Sheevaplug setenv ethaddr 00:50:43:01:63:EA setenv macaddr 00:50:43:01:63:EA saveenv tftpboot 0x00800000 uImage
nand erase 0x100000 0x400000
nand write 0x800000 0x100000 0x400000
setenv bootargs_ubi console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs setenv bootcmd_nand_read nand read 0x800000 0x100000 0x400000 setenv bootcmd 'setenv bootargs $(bootargs_ubi); run bootcmd_nand_read; bootm 0x800000' saveenv boot
Sheevaplug> boot NAND read: device 0 offset 0x100000, size 0x400000 4194304 bytes read: OK ## Booting kernel from Legacy Image at 00800000 ... Image Name: Debian kernel Created: 2023-10-01 22:16:20 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2634776 Bytes = 2.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ...
Sheevaplug> printenv arcNumber=2097 baudrate=115200 bootargs_ubi=console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs bootcmd=setenv bootargs $(bootargs_ubi); run bootcmd_nand_read; bootm 0x800000 bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd_nand_read=nand read 0x800000 0x100000 0x400000 bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb console=ttyS0,115200 device=0:1 devices=usb ide mmc disks=0 1 2 3 dtb_file=/boot/dts/kirkwood-sheevaplug.dtb ethact=egiga0 ethaddr=00:50:43:01:63:EA if_netconsole=ping $serverip ipaddr=192.168.0.201 led_error=orange blinking led_exit=green off led_init=green blinking load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file load_dtb_addr=0x1c00000 load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd load_initrd_addr=0x1100000 load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage load_uimage_addr=0x800000 macaddr=00:50:43:01:63:EA mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) partition=nand0,2 preboot_nc=run if_netconsole start_netconsole scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done serverip=192.168.0.205 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_ready_retry=15 Environment size: 3056/131068 bytes Sheevaplug>
Re: Help flashing to a Sheevaplug NAND October 18, 2023 06:08AM |
Registered: 1 year ago Posts: 11 |
Re: Help flashing to a Sheevaplug NAND October 18, 2023 01:08PM |
Admin Registered: 13 years ago Posts: 19,107 |
mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)The above is the default for the current u-boot.
root@sheevaplug:~# /usr/sbin/ubiformat /dev/mtd2 -s 512 ubiformat: mtd2 (nand), size 531628032 bytes (507.0 MiB), 4056 eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 2048 bytesThis showed mtd2 is 507 MB. So mtds definition for this Debian system is not the same as what I've defined for this u-boot and the my released rootfs here (mtd2 is 32MB).
dmesg cat /proc/mtdand post the log here.
Re: Help flashing to a Sheevaplug NAND October 19, 2023 03:36AM |
Registered: 1 year ago Posts: 11 |
U-Boot 2017.07-tld-2 (Dec 04 2017 - 02:00:45 -0800) Marvell-Sheevaplug SoC: Kirkwood 88F6281_A0 DRAM: 512 MiB WARNING: Caches not enabled NAND: 512 MiB MMC: MVEBU_MMC: 0 In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 Sheevaplug> version U-Boot 2017.07-tld-2 (Dec 04 2017 - 02:00:45 -0800) Marvell-Sheevaplug gcc (Debian 6.3.0-18) 6.3.0 20170516 GNU ld (GNU Binutils for Debian) 2.28 Sheevaplug>
cat /proc/mtd
root@sheevaplug:~# cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 "u-boot" mtd1: 00400000 00020000 "uImage" mtd2: 1fb00000 00020000 "root" root@sheevaplug:~#
dmesg
[ 18.850683] 3 fixed-partitions partitions found on MTD device orion_nand [ 18.857502] Creating 3 MTD partitions on "orion_nand": [ 18.876896] 0x000000000000-0x000000100000 : "u-boot" [ 18.892994] 0x000000100000-0x000000500000 : "uImage" [ 18.909506] 0x000000500000-0x000020000000 : "root"
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.0-13-marvell (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 Debian 6.1.55-1 (2023-09-29) [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Globalscale Technologies SheevaPlug [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.000000] Memory: 495044K/524288K available (4842K kernel code, 838K rwdata, 1632K rodata, 212K init, 227K bss, 29244K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000002] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.000041] Switching to timer-based delay loop, resolution 5ns [ 0.000259] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.000288] CPU: Testing write buffer coherency: ok [ 0.000419] pid_max: default: 32768 minimum: 301 [ 0.000939] LSM: Security Framework initializing [ 0.001284] landlock: Up and running. [ 0.001294] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.001579] AppArmor: AppArmor initialized [ 0.001963] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001996] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.006309] cblist_init_generic: Setting adjustable number of callback queues. [ 0.006326] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.006700] Setting up static identity map for 0x8220 - 0x825c [ 0.006984] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2 [ 0.008694] devtmpfs: initialized [ 0.013512] VFP support v0.3: not present [ 0.013684] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.013725] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.013956] pinctrl core: initialized pinctrl subsystem [ 0.016380] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.017167] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.018061] audit: initializing netlink subsys (disabled) [ 0.018563] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1 [ 0.019507] thermal_sys: Registered thermal governor 'fair_share' [ 0.019524] thermal_sys: Registered thermal governor 'bang_bang' [ 0.019533] thermal_sys: Registered thermal governor 'step_wise' [ 0.019539] thermal_sys: Registered thermal governor 'user_space' [ 0.019588] cpuidle: using governor ladder [ 0.019970] Feroceon L2: Enabling L2 [ 0.020006] Feroceon L2: Cache support initialised. [ 0.026610] No ATAGs? [ 0.060853] clocksource: Switched to clocksource orion_clocksource [ 0.061741] VFS: Disk quotas dquot_6.6.0 [ 0.061828] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.062683] AppArmor: AppArmor Filesystem Enabled [ 0.064440] NET: Registered PF_INET protocol family [ 0.069030] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.071059] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.071302] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.071337] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.071422] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.071915] TCP: Hash tables configured (established 4096 bind 4096) [ 0.072048] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.072081] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.072362] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.072452] PCI: CLS 0 bytes, default 32 [ 0.077461] Trying to unpack rootfs image as initramfs... [ 0.140392] Initialise system trusted keyrings [ 0.140504] Key type blacklist registered [ 0.141701] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.149368] Key type asymmetric registered [ 0.149384] Asymmetric key parser 'x509' registered [ 4.060055] Freeing initrd memory: 16688K [ 4.101989] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.102286] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 4.104712] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 4.108065] mv_xor f1060800.xor: Marvell shared XOR driver [ 4.146742] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.147388] mv_xor f1060900.xor: Marvell shared XOR driver [ 4.182740] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.183476] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 4.184839] printk: console [ttyS0] disabled [ 4.184969] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A [ 4.718702] printk: console [ttyS0] enabled [ 4.724312] i2c_dev: i2c /dev entries driver [ 4.729704] ledtrig-cpu: registered to indicate activity on CPUs [ 4.737012] registered taskstats version 1 [ 4.741200] Loading compiled-in X.509 certificates [ 4.787317] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.796387] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.846337] Key type encrypted registered [ 4.850693] AppArmor: AppArmor sha1 policy hashing enabled [ 4.862381] Freeing unused kernel image (initmem) memory: 212K [ 4.868294] Kernel memory protection not selected by kernel config. [ 4.874636] Run /init as init process [ 4.878332] with arguments: [ 4.878343] /init [ 4.878351] with environment: [ 4.878358] HOME=/ [ 4.878365] TERM=linux [ 5.465281] rtc-mv f1010300.rtc: registered as rtc0 [ 5.500983] rtc-mv f1010300.rtc: setting system clock to 2000-11-13T03:02:28 UTC (974084548) [ 5.604355] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 5.675826] usbcore: registered new interface driver usbfs [ 5.730281] usbcore: registered new interface driver hub [ 5.768518] usbcore: registered new device driver usb [ 5.810758] orion-ehci f1050000.ehci: EHCI Host Controller [ 5.840113] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 5.850323] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000 [ 5.868875] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 5.875324] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.883674] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.890953] usb usb1: Product: EHCI Host Controller [ 5.895871] usb usb1: Manufacturer: Linux 6.1.0-13-marvell ehci_hcd [ 5.902183] usb usb1: SerialNumber: f1050000.ehci [ 5.908966] hub 1-0:1.0: USB hub found [ 5.912795] hub 1-0:1.0: 1 port detected [ 5.927786] mmc0: host does not support reading read-only switch, assuming write-enable [ 5.944424] mmc0: new high speed SDHC card at address 0001 [ 5.964106] mmcblk0: mmc0:0001 SD3.0 3.74 GiB [ 5.979354] mmcblk0: p1 p2 p3 < p5 > [ 6.172892] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 6.334455] usb 1-1: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00 [ 6.342754] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.349962] usb 1-1: Product: Cruzer Blade [ 6.354098] usb 1-1: Manufacturer: SanDisk [ 6.358230] usb 1-1: SerialNumber: 4C530001170729109504 [ 6.408050] SCSI subsystem initialized [ 6.428957] usb-storage 1-1:1.0: USB Mass Storage device detected [ 6.440306] scsi host0: usb-storage 1-1:1.0 [ 6.448193] usbcore: registered new interface driver usb-storage [ 6.460436] usbcore: registered new interface driver uas [ 6.497939] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:01:63:ea [ 7.457781] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6 [ 7.556272] sd 0:0:0:0: [sda] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 7.566368] sd 0:0:0:0: [sda] Write Protect is off [ 7.571238] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 7.571971] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 7.591104] sda: sda1 sda2 sda3 < sda5 > [ 7.599941] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 9.044200] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [ 9.906131] systemd[1]: System time before build time, advancing clock. [ 10.000600] systemd[1]: Inserted module 'autofs4' [ 10.082643] NET: Registered PF_INET6 protocol family [ 10.149591] Segment Routing with IPv6 [ 10.153536] In-situ OAM (IOAM) with IPv6 [ 10.230268] systemd[1]: systemd 252.17-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 10.263237] systemd[1]: Detected architecture arm. [ 10.290411] systemd[1]: Hostname set to <sheevaplug>. [ 12.359721] systemd[1]: Queued start job for default target graphical.target. [ 12.377859] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 12.407796] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 12.435766] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 12.463726] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 12.490786] systemd[1]: Created slice user.slice - User and Session Slice. [ 12.517755] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 12.545649] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 12.574733] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 12.605834] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 12.629514] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 12.657558] systemd[1]: Reached target paths.target - Path Units. [ 12.681346] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 12.705280] systemd[1]: Reached target slices.target - Slice Units. [ 12.729673] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 12.758375] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 12.785752] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 12.815181] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 12.842620] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 12.870452] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 12.900236] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 12.926350] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 12.954658] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 12.976075] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 13.008935] random: crng init done [ 13.018004] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 13.063067] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 13.106403] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 13.147795] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 13.186109] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 13.240284] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 13.268545] device-mapper: uevent: version 1.0.3 [ 13.290086] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 13.299419] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 13.353565] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 13.394030] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 13.420725] fuse: init (API version 7.37) [ 13.425939] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 13.463191] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 13.476540] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 13.499543] systemd[1]: Starting systemd-journald.service - Journal Service... [ 13.516812] loop: module loaded [ 13.562279] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 13.613197] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 13.702235] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 13.837851] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 13.890452] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 13.942103] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 13.960950] EXT4-fs (sda2): re-mounted. Quota mode: none. [ 14.013138] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 14.063968] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 14.092687] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 14.139959] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 14.166328] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 14.212051] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 14.238347] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 14.284000] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 14.313116] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 14.359957] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 14.386321] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 14.432037] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 14.458312] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 14.502346] systemd[1]: Started systemd-journald.service - Journal Service. [ 14.925747] systemd-journald[172]: Received client request to flush runtime journal. [ 14.968614] systemd-journald[172]: File /var/log/journal/75e30cfb7de24a1aa004fabd2a8a8a68/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 16.839019] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 17.465594] orion_wdt: Initial timeout 21 sec [ 17.547667] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xdc [ 17.554121] nand: Hynix NAND 512MiB 3,3V 8-bit [ 17.558629] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 17.582451] marvell-cesa f1030000.crypto: CESA device successfully registered [ 17.776411] Scanning device for bad blocks [ 18.540460] Bad eraseblock 2894 at 0x0000169c0000 [ 18.850683] 3 fixed-partitions partitions found on MTD device orion_nand [ 18.857502] Creating 3 MTD partitions on "orion_nand": [ 18.876896] 0x000000000000-0x000000100000 : "u-boot" [ 18.892994] 0x000000100000-0x000000500000 : "uImage" [ 18.909506] 0x000000500000-0x000020000000 : "root" [ 19.479497] Adding 497660k swap on /dev/sda5. Priority:-2 extents:1 across:497660k [ 19.944579] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 19.994134] EXT4-fs (sda1): mounted filesystem without journal. Quota mode: none. [ 20.611485] audit: type=1400 audit(1695212124.700:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=248 comm="apparmor_parser" [ 20.713294] audit: type=1400 audit(1695212124.804:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=249 comm="apparmor_parser" [ 20.760470] audit: type=1400 audit(1695212124.804:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=249 comm="apparmor_parser" [ 21.041502] audit: type=1400 audit(1695212125.132:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=250 comm="apparmor_parser" [ 21.113257] audit: type=1400 audit(1695212125.132:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=250 comm="apparmor_parser" [ 21.196957] audit: type=1400 audit(1695212125.132:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=250 comm="apparmor_parser" [ 21.249343] audit: type=1400 audit(1695212125.132:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=250 comm="apparmor_parser" [ 21.290750] audit: type=1400 audit(1695212125.320:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=253 comm="apparmor_parser" [ 21.340451] audit: type=1400 audit(1695212125.320:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=253 comm="apparmor_parser" [ 21.416985] audit: type=1400 audit(1695212125.320:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=253 comm="apparmor_parser" [ 22.873635] NET: Registered PF_PACKET protocol family
Sheevaplug> printenv arcNumber=2097 baudrate=115200 bootargs_ubi=console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs bootcmd=setenv bootargs $(bootargs_ubi); run bootcmd_nand_read; bootm 0x800000 bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd_nand_read=nand read 0x800000 0x100000 0x400000 bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb console=ttyS0,115200 device=0:1 devices=usb ide mmc disks=0 1 2 3 dtb_file=/boot/dts/kirkwood-sheevaplug.dtb ethact=egiga0 ethaddr=00:50:43:01:63:EA if_netconsole=ping $serverip ipaddr=192.168.0.201 led_error=orange blinking led_exit=green off led_init=green blinking load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file load_dtb_addr=0x1c00000 load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd load_initrd_addr=0x1100000 load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage load_uimage_addr=0x800000 macaddr=00:50:43:01:63:EA mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) partition=nand0,2 preboot_nc=run if_netconsole start_netconsole scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done serverip=192.168.0.205 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_ready_retry=15 Environment size: 3056/131068 bytes Sheevaplug>
Re: Help flashing to a Sheevaplug NAND October 19, 2023 02:01PM |
Admin Registered: 13 years ago Posts: 19,107 |
setenv mtdparts 'mtdparts=orion_nand:1M(u-boot),4M(uImage),-(root)' mtdparts
Re: Help flashing to a Sheevaplug NAND October 19, 2023 02:46PM |
Registered: 1 year ago Posts: 11 |
screen /dev/ttyUSB0 115200
U-Boot 2017.07-tld-2 (Dec 04 2017 - 02:00:45 -0800) Marvell-Sheevaplug SoC: Kirkwood 88F6281_A0 DRAM: 512 MiB WARNING: Caches not enabled NAND: 512 MiB MMC: MVEBU_MMC: 0 In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 Sheevaplug>
env default -a saveenv
Sheevaplug> env default -a ## Resetting to default environment Sheevaplug> saveenv Saving Environment to NAND... Erasing NAND... Erasing at 0xc0000 -- 100% complete. Writing to NAND... OK Sheevaplug>
setenv bootargs_ubi console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs setenv bootcmd_nand_read nand read 0x800000 0x100000 0x400000 setenv bootcmd 'setenv bootargs $(bootargs_ubi); run bootcmd_nand_read; bootm 0x800000' setenv mtdparts 'mtdparts=orion_nand:1M(u-boot),4M(uImage),-(root)' saveenv
Sheevaplug> setenv bootargs_ubi console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs Sheevaplug> setenv bootcmd_nand_read nand read 0x800000 0x100000 0x400000 Sheevaplug> setenv bootcmd 'setenv bootargs $(bootargs_ubi); run bootcmd_nand_read; bootm 0x800000' Sheevaplug> setenv mtdparts 'mtdparts=orion_nand:1M(u-boot),4M(uImage),-(root)' Sheevaplug> saveenv Saving Environment to NAND... Erasing NAND... Erasing at 0xc0000 -- 100% complete. Writing to NAND... OK Sheevaplug>
mtdparts
Sheevaplug> mtdparts device nand0 <orion_nand>, # parts = 3 #: name size offset mask_flags 0: u-boot 0x00100000 0x00000000 0 1: uImage 0x00400000 0x00100000 0 2: root 0x1fb00000 0x00500000 0 active partition: nand0,2 - (root) 0x1fb00000 @ 0x00500000 defaults: mtdids : none mtdparts: none Sheevaplug>
boot
Sheevaplug> boot NAND read: device 0 offset 0x100000, size 0x400000 4194304 bytes read: OK ## Booting kernel from Legacy Image at 00800000 ... Image Name: Debian kernel Created: 2023-10-01 22:16:20 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2634776 Bytes = 2.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ...
printenv
Sheevaplug> printenv arcNumber=2097 baudrate=115200 bootargs_ubi=console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs bootcmd=setenv bootargs $(bootargs_ubi); run bootcmd_nand_read; bootm 0x800000 bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd_nand_read=nand read 0x800000 0x100000 0x400000 bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb console=ttyS0,115200 device=0:1 devices=usb ide mmc disks=0 1 2 3 dtb_file=/boot/dts/kirkwood-sheevaplug.dtb ethact=egiga0 ethaddr=52:3b:20:9c:11:51 if_netconsole=ping $serverip ipaddr=192.168.0.231 led_error=orange blinking led_exit=green off led_init=green blinking load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file load_dtb_addr=0x1c00000 load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd load_initrd_addr=0x1100000 load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage load_uimage_addr=0x800000 mainlineLinux=yes mtddevname=root mtddevnum=2 mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),-(root) partition=nand0,2 preboot_nc=run if_netconsole start_netconsole scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done serverip=192.168.0.220 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_ready_retry=15 Environment size: 3048/131068 bytes Sheevaplug>
Re: Help flashing to a Sheevaplug NAND October 19, 2023 02:48PM |
Registered: 1 year ago Posts: 11 |
Re: Help flashing to a Sheevaplug NAND October 19, 2023 03:14PM |
Registered: 1 year ago Posts: 11 |
setenv mtdparts 'mtdparts=orion_nand:1M(u-boot),4M(uImage),-(root)'line, and booted from the USB to Bookworm.
screen /dev/ttyUSB0 115200
U-Boot 2017.07-tld-2 (Dec 04 2017 - 02:00:45 -0800) Marvell-Sheevaplug SoC: Kirkwood 88F6281_A0 DRAM: 512 MiB WARNING: Caches not enabled NAND: 512 MiB MMC: MVEBU_MMC: 0 In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 Sheevaplug>
setenv bootargs_console console=ttyS0,115200 setenv bootcmd_usb 'usb start; ext2load usb 0:1 0x00800000 /uImage; ext2load usb 0:1 0x01100000 /uInitrd' setenv bootcmd 'setenv bootargs ${bootargs_console}; run bootcmd_usb; bootm 0x00800000 0x01100000' setenv mtdparts 'mtdparts=orion_nand:1M(u-boot),4M(uImage),-(root)' mtdparts
Sheevaplug> setenv mtdparts 'mtdparts=orion_nand:1M(u-boot),4M(uImage),-(root)' Sheevaplug> setenv bootcmd_usb 'usb start; ext2load usb 0:1 0x00800000 /uImage; ext2load usb 0:1 0x01100000 /uInitrd' Sheevaplug> setenv bootcmd 'setenv bootargs ${bootargs_console}; run bootcmd_usb; bootm 0x00800000 0x01100000' Sheevaplug> setenv mtdparts 'mtdparts=orion_nand:1M(u-boot),4M(uImage),-(root)' Sheevaplug> mtdparts device nand0 <orion_nand>, # parts = 3 #: name size offset mask_flags 0: u-boot 0x00100000 0x00000000 0 1: uImage 0x00400000 0x00100000 0 2: root 0x1fb00000 0x00500000 0 active partition: nand0,2 - (root) 0x1fb00000 @ 0x00500000 defaults: mtdids : none mtdparts: none Sheevaplug>
run bootcmd
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.0-13-marvell (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 Debian 6.1.55-1 (2023-09-29) [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Globalscale Technologies SheevaPlug [ 0.000000] printk: bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200n8 earlyprintk [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.000000] Memory: 495044K/524288K available (4842K kernel code, 838K rwdata, 1632K rodata, 212K init, 227K bss, 29244K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000002] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.007909] Switching to timer-based delay loop, resolution 5ns [ 0.014103] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.024642] CPU: Testing write buffer coherency: ok [ 0.029713] pid_max: default: 32768 minimum: 301 [ 0.034896] LSM: Security Framework initializing [ 0.039947] landlock: Up and running. [ 0.043636] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.050590] AppArmor: AppArmor initialized [ 0.055130] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.062535] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.074663] cblist_init_generic: Setting adjustable number of callback queues. [ 0.081981] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.088516] Setting up static identity map for 0x8220 - 0x825c [ 0.094728] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2 [ 0.101574] devtmpfs: initialized [ 0.109821] VFP support v0.3: not present [ 0.114104] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.123965] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.131045] pinctrl core: initialized pinctrl subsystem [ 0.138701] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.145488] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.153327] audit: initializing netlink subsys (disabled) [ 0.160188] thermal_sys: Registered thermal governor 'fair_share' [ 0.160210] thermal_sys: Registered thermal governor 'bang_bang' [ 0.166399] audit: type=2000 audit(0.096:1): state=initialized audit_enabled=0 res=1 [ 0.180293] thermal_sys: Registered thermal governor 'step_wise' [ 0.180313] thermal_sys: Registered thermal governor 'user_space' [ 0.186438] cpuidle: using governor ladder [ 0.197150] Feroceon L2: Enabling L2 [ 0.200818] Feroceon L2: Cache support initialised. [ 0.212336] No ATAGs? [ 0.248875] clocksource: Switched to clocksource orion_clocksource [ 0.256043] VFS: Disk quotas dquot_6.6.0 [ 0.269034] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.281860] AppArmor: AppArmor Filesystem Enabled [ 0.294714] NET: Registered PF_INET protocol family [ 0.309055] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.322937] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.331697] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.339554] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.347435] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.355102] TCP: Hash tables configured (established 4096 bind 4096) [ 0.361632] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.368239] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.375528] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.381324] PCI: CLS 0 bytes, default 32 [ 0.385764] Trying to unpack rootfs image as initramfs... [ 0.392103] Initialise system trusted keyrings [ 0.401268] Key type blacklist registered [ 0.422528] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.436622] Key type asymmetric registered [ 0.444974] Asymmetric key parser 'x509' registered [ 4.379324] Freeing initrd memory: 16688K [ 4.424751] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.430979] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 4.440808] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 4.451528] mv_xor f1060800.xor: Marvell shared XOR driver [ 4.494631] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.502647] mv_xor f1060900.xor: Marvell shared XOR driver [ 4.546623] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.554700] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 4.562512] printk: console [ttyS0] disabled [ 4.566922] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A [ 4.575988] printk: console [ttyS0] enabled [ 4.584421] printk: bootconsole [earlycon0] disabled [ 4.595824] i2c_dev: i2c /dev entries driver [ 4.601223] ledtrig-cpu: registered to indicate activity on CPUs [ 4.608530] registered taskstats version 1 [ 4.612730] Loading compiled-in X.509 certificates [ 4.659228] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.668314] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.717965] Key type encrypted registered [ 4.722317] AppArmor: AppArmor sha1 policy hashing enabled [ 4.734061] Freeing unused kernel image (initmem) memory: 212K [ 4.739970] Kernel memory protection not selected by kernel config. [ 4.746321] Run /init as init process [ 4.750018] with arguments: [ 4.750029] /init [ 4.750037] with environment: [ 4.750043] HOME=/ [ 4.750051] TERM=linux [ 5.361262] rtc-mv f1010300.rtc: registered as rtc0 [ 5.407509] rtc-mv f1010300.rtc: setting system clock to 2000-11-15T18:40:30 UTC (974313630) [ 5.428998] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 5.506133] usbcore: registered new interface driver usbfs [ 5.553061] usbcore: registered new interface driver hub [ 5.593077] usbcore: registered new device driver usb [ 5.654215] orion-ehci f1050000.ehci: EHCI Host Controller [ 5.684657] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 5.715699] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000 [ 5.740899] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 5.747357] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.755698] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.762979] usb usb1: Product: EHCI Host Controller [ 5.767894] usb usb1: Manufacturer: Linux 6.1.0-13-marvell ehci_hcd [ 5.774208] usb usb1: SerialNumber: f1050000.ehci [ 5.780927] hub 1-0:1.0: USB hub found [ 5.784758] hub 1-0:1.0: 1 port detected [ 6.040896] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 6.202073] usb 1-1: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00 [ 6.210331] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.217550] usb 1-1: Product: Cruzer Blade [ 6.221703] usb 1-1: Manufacturer: SanDisk [ 6.225837] usb 1-1: SerialNumber: 4C530001170729109504 [ 6.263275] SCSI subsystem initialized [ 6.274599] usb-storage 1-1:1.0: USB Mass Storage device detected [ 6.283060] scsi host0: usb-storage 1-1:1.0 [ 6.290202] usbcore: registered new interface driver usb-storage [ 6.301238] usbcore: registered new interface driver uas [ 6.357851] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 52:3b:20:9c:11:51 [ 7.305905] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6 [ 7.404635] sd 0:0:0:0: [sda] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 7.414738] sd 0:0:0:0: [sda] Write Protect is off [ 7.419611] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 7.420343] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 7.439597] sda: sda1 sda2 sda3 < sda5 > [ 7.447260] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 8.316149] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [ 9.176782] systemd[1]: System time before build time, advancing clock. [ 9.270464] systemd[1]: Inserted module 'autofs4' [ 9.352797] NET: Registered PF_INET6 protocol family [ 9.419417] Segment Routing with IPv6 [ 9.423330] In-situ OAM (IOAM) with IPv6 [ 9.499840] systemd[1]: systemd 252.17-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 9.532840] systemd[1]: Detected architecture arm. [ 9.562563] systemd[1]: Hostname set to <sheevaplug>. [ 11.627327] systemd[1]: Queued start job for default target graphical.target. [ 11.645318] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 11.671724] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 11.699717] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 11.727700] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 11.754805] systemd[1]: Created slice user.slice - User and Session Slice. [ 11.781752] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 11.809695] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 11.838665] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 11.869830] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 11.893475] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 11.921709] systemd[1]: Reached target paths.target - Path Units. [ 11.945405] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 11.969226] systemd[1]: Reached target slices.target - Slice Units. [ 11.993732] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 12.022399] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 12.049725] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 12.079158] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 12.106609] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 12.134525] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 12.164234] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 12.190375] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 12.218715] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 12.240139] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 12.273273] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 12.321313] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 12.362176] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 12.403321] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 12.442242] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 12.454386] random: crng init done [ 12.500275] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 12.535741] device-mapper: uevent: version 1.0.3 [ 12.547243] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 12.562654] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 12.614587] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 12.656272] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 12.687630] fuse: init (API version 7.37) [ 12.702028] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 12.729526] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 12.742686] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 12.761817] loop: module loaded [ 12.773506] systemd[1]: Starting systemd-journald.service - Journal Service... [ 12.830418] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 12.880914] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 12.970370] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 13.109604] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 13.154700] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 13.202176] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 13.224065] EXT4-fs (sda2): re-mounted. Quota mode: none. [ 13.273151] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 13.324145] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 13.354440] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 13.399962] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 13.426299] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 13.471962] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 13.498347] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 13.539996] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 13.566333] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 13.615943] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 13.642384] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 13.687966] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 13.714288] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 13.758320] systemd[1]: Started systemd-journald.service - Journal Service. [ 14.177772] systemd-journald[171]: Received client request to flush runtime journal. [ 14.224374] systemd-journald[171]: File /var/log/journal/75e30cfb7de24a1aa004fabd2a8a8a68/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 16.172775] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 16.392291] orion_wdt: Initial timeout 21 sec [ 16.536251] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xdc [ 16.542691] nand: Hynix NAND 512MiB 3,3V 8-bit [ 16.547197] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 16.556652] marvell-cesa f1030000.crypto: CESA device successfully registered [ 16.776983] Scanning device for bad blocks [ 17.509894] Bad eraseblock 2894 at 0x0000169c0000 [ 17.810640] 3 fixed-partitions partitions found on MTD device orion_nand [ 17.817452] Creating 3 MTD partitions on "orion_nand": [ 17.836914] 0x000000000000-0x000000100000 : "u-boot" [ 17.847244] 0x000000100000-0x000000500000 : "uImage" [ 17.862556] 0x000000500000-0x000020000000 : "root" [ 18.100146] Adding 497660k swap on /dev/sda5. Priority:-2 extents:1 across:497660k [ 18.592252] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 18.639530] EXT4-fs (sda1): mounted filesystem without journal. Quota mode: none. [ 19.291648] audit: type=1400 audit(1695212124.112:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=247 comm="apparmor_parser" [ 19.392117] audit: type=1400 audit(1695212124.212:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=248 comm="apparmor_parser" [ 19.412753] audit: type=1400 audit(1695212124.212:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=248 comm="apparmor_parser" [ 19.734452] audit: type=1400 audit(1695212124.556:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=249 comm="apparmor_parser" [ 19.803276] audit: type=1400 audit(1695212124.556:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=249 comm="apparmor_parser" [ 19.891291] audit: type=1400 audit(1695212124.556:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=249 comm="apparmor_parser" [ 19.940981] audit: type=1400 audit(1695212124.556:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=249 comm="apparmor_parser" [ 20.000973] audit: type=1400 audit(1695212124.736:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=252 comm="apparmor_parser" [ 20.068970] audit: type=1400 audit(1695212124.736:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=252 comm="apparmor_parser" [ 20.133089] audit: type=1400 audit(1695212124.736:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=252 comm="apparmor_parser" [ 21.166995] NET: Registered PF_PACKET protocol family
Re: Help flashing to a Sheevaplug NAND October 19, 2023 03:25PM |
Admin Registered: 13 years ago Posts: 19,107 |
Sheevaplug> setenv bootargs_ubi console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs Sheevaplug> setenv bootcmd_nand_read nand read 0x800000 0x100000 0x400000 Sheevaplug> setenv bootcmd 'setenv bootargs $(bootargs_ubi); run bootcmd_nand_read; bootm 0x800000' Sheevaplug> setenv mtdparts 'mtdparts=orion_nand:1M(u-boot),4M(uImage),-(root)'
Sheevaplug> mtdparts device nand0 <orion_nand>, # parts = 3 #: name size offset mask_flags 0: u-boot 0x00100000 0x00000000 0 1: uImage 0x00400000 0x00100000 0 2: root 0x1fb00000 0x00500000 0 active partition: nand0,2 - (root) 0x1fb00000 @ 0x00500000 defaults: mtdids : none mtdparts: none Sheevaplug>
Sheevaplug> boot NAND read: device 0 offset 0x100000, size 0x400000 4194304 bytes read: OK ## Booting kernel from Legacy Image at 00800000 ... Image Name: Debian kernel Created: 2023-10-01 22:16:20 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2634776 Bytes = 2.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ...
Re: Help flashing to a Sheevaplug NAND October 19, 2023 04:31PM |
Registered: 1 year ago Posts: 11 |
Sheevaplug> tftpboot 0x00800000 uImage Using egiga0 device TFTP from server 192.168.0.205; our IP address is 192.168.0.201 Filename 'uImage'. Load address: 0x800000 Loading: ################################################################# ################################################################# ################################################## 626 KiB/s done Bytes transferred = 2634840 (283458 hex) Sheevaplug> nand erase 0x100000 0x400000 NAND erase: device 0 offset 0x100000, size 0x400000 Erasing at 0x4e0000 -- 100% complete. OK Sheevaplug> nand write 0x800000 0x100000 0x400000 NAND write: device 0 offset 0x100000, size 0x400000 4194304 bytes written: OK Sheevaplug>
md 0x800000 0x10
Sheevaplug> md 0x800000 0x10 00800000: 56190527 493e2202 b4ef1965 18342800 '..V.">Ie....(4. 00800010: 00800000 00800000 ed504a46 00020205 ........FJP..... 00800020: 69626544 6b206e61 656e7265 0000006c Debian kernel... 00800030: 00000000 00000000 00000000 00000000 ................ Sheevaplug>
bootm 0x800000
[ 0.256066] VFS: Disk quotas dquot_6.6.0 [ 0.269062] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.281877] AppArmor: AppArmor Filesystem Enabled [ 0.294780] NET: Registered PF_INET protocol family [ 0.309083] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.323070] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.331828] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.339685] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.347565] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.355232] TCP: Hash tables configured (established 4096 bind 4096) [ 0.361765] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.368371] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.375665] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.381463] PCI: CLS 0 bytes, default 32 [ 0.386809] Initialise system trusted keyrings [ 0.391399] Key type blacklist registered [ 0.395775] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.409786] Key type asymmetric registered [ 0.413942] Asymmetric key parser 'x509' registered [ 0.420837] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 0.427054] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.436962] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 0.447757] mv_xor f1060800.xor: Marvell shared XOR driver [ 0.490664] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 0.498687] mv_xor f1060900.xor: Marvell shared XOR driver [ 0.542656] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 0.550727] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.558488] printk: console [ttyS0] disabled [ 0.562901] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A [ 0.571964] printk: console [ttyS0] enabled [ 0.571964] printk: console [ttyS0] enabled [ 0.580397] printk: bootconsole [earlycon0] disabled [ 0.580397] printk: bootconsole [earlycon0] disabled [ 0.591867] i2c_dev: i2c /dev entries driver [ 0.597247] ledtrig-cpu: registered to indicate activity on CPUs [ 0.604543] registered taskstats version 1 [ 0.608741] Loading compiled-in X.509 certificates [ 0.617769] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 0.626810] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 0.639075] Key type encrypted registered [ 0.643407] AppArmor: AppArmor sha1 policy hashing enabled [ 0.654730] List of all partitions: [ 0.658285] No filesystem could mount root, tried: [ 0.658291] [ 0.664703] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 0.673012] CPU: 0 PID: 1 Comm: swapper Not tainted 6.1.0-13-marvell #1 Debian 6.1.55-1 [ 0.681145] Hardware name: Marvell Kirkwood (Flattened Device Tree) [ 0.687451] unwind_backtrace from show_stack+0x10/0x14 [ 0.692728] show_stack from dump_stack_lvl+0x28/0x30 [ 0.697820] dump_stack_lvl from panic+0xd0/0x304 [ 0.702565] panic from mount_block_root+0x164/0x1ec [ 0.707577] mount_block_root from prepare_namespace+0x140/0x17c [ 0.713637] prepare_namespace from kernel_init+0x10/0x108 [ 0.719166] kernel_init from ret_from_fork+0x14/0x28 [ 0.724258] Exception stack(0xe0819fb0 to 0xe0819ff8) [ 0.729336] 9fa0: 00000000 00000000 00000000 00000000 [ 0.737561] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 0.745783] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 0.752430] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
md 0x800000 0x10
Sheevaplug> md 0x800000 0x10 00800000: 0000ffff 00007bff 0200ffff 0400fffb .....{.......... 00800010: 0000ffff 0800ffef 0000ffff 0000ff7f ................ 00800020: 0000ffff 0000ffdf 0000ffff 0000ffff ................ 00800030: 0000fdff 0000ffff 0000bfff 0000ffff ................ Sheevaplug>
bootm 0x800000
Sheevaplug> bootm 0x800000 Wrong Image Format for bootm command ERROR: can't get kernel image! Sheevaplug>
Re: Help flashing to a Sheevaplug NAND October 19, 2023 05:38PM |
Admin Registered: 13 years ago Posts: 19,107 |
> bootm 0x800000 >>
Quote
(I'm not *that* attached to Debain tbh.)
Quote
Rescue System for Pogo E02 using LEDE/OpenWrt (Install with Serial Console)
Re: Help flashing to a Sheevaplug NAND October 23, 2023 03:03AM |
Registered: 1 year ago Posts: 11 |
Re: Help flashing to a Sheevaplug NAND October 23, 2023 06:14AM |
Registered: 1 year ago Posts: 11 |
setenv ipaddr 192.168.0.55 setenv serverip 192.168.0.205 setenv ethaddr 00:50:43:01:63:EA tftpboot u-boot.kwb
=> tftpboot u-boot.kwb Using egiga0 device TFTP from server 192.168.0.205; our IP address is 192.168.0.55 Filename 'u-boot.kwb'. Load address: 0x800000 Loading: ################################### 625 KiB/s done Bytes transferred = 502516 (7aaf4 hex) =>
nand erase 0x0 0x100000
=> nand erase 0x0 0x100000 NAND erase: device 0 offset 0x0, size 0x100000 Erasing at 0xe0000 -- 100% complete. OK =>
nand write 0x800000 0x0 0x100000
=> nand write 0x800000 0x0 0x100000 NAND write: device 0 offset 0x0, size 0x100000 1048576 bytes written: OK =>
reset
setenv ethaddr 00:50:43:01:63:EA saveenv
=> saveenv Saving Environment to NAND... Erasing NAND... Erasing at 0x80000 -- 100% complete. Writing to NAND... OK OK =>
setenv serverip 192.168.0.205 setenv ipaddr 192.168.0.55
tftpboot openwrt-23.05.0-rc4-kirkwood-generic-globalscale_sheevaplug-squashfs-factory.bin
=> tftpboot openwrt-23.05.0-rc4-kirkwood-generic-globalscale_sheevaplug-squashfs-factory.bin Using egiga0 device TFTP from server 192.168.0.205; our IP address is 192.168.0.55 Filename 'openwrt-23.05.0-rc4-kirkwood-generic-globalscale_sheevaplug-squashfs-factory.bin'. Load address: 0x800000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ### 694.3 KiB/s done Bytes transferred = 5767168 (580000 hex) =>
nand erase.part ubi
=> nand erase.part ubi NAND erase.part: device 0 offset 0x100000, size 0x1ff00000 Skipping bad block at 0x169c0000 Erasing at 0x1ffe0000 -- 100% complete. OK =>
nand write 0x800000 ubi 0x600000
=> nand write 0x800000 ubi 0x600000 NAND write: device 0 offset 0x100000, size 0x600000 6291456 bytes written: OK =>
reset
BusyBox v1.36.1 (2023-09-29 09:29:36 UTC) built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt 23.05.0-rc4, r23482-7fe85ce1f2 -----------------------------------------------------
Re: Help flashing to a Sheevaplug NAND October 23, 2023 07:37AM |
Registered: 9 years ago Posts: 466 |
Re: Help flashing to a Sheevaplug NAND October 23, 2023 10:19AM |
Registered: 1 year ago Posts: 11 |
cd /tmp
wget https://downloads.openwrt.org/releases/23.05.0/targets/kirkwood/generic/openwrt-23.05.0-kirkwood-generic-globalscale_sheevaplug-squashfs-sysupgrade.bin
sysupgrade openwrt-23.05.0-kirkwood-generic-globalscale_sheevaplug-squashfs-sysupgrade.bin
BusyBox v1.36.1 (2023-10-09 21:45:35 UTC) built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt 23.05.0, r23497-6637af95aa -----------------------------------------------------
Re: Help flashing to a Sheevaplug NAND October 23, 2023 01:08PM |
Admin Registered: 13 years ago Posts: 19,107 |
Re: Help flashing to a Sheevaplug NAND October 28, 2023 08:36AM |
Registered: 1 year ago Posts: 11 |
Re: Help flashing to a Sheevaplug NAND October 28, 2024 02:39PM |
Registered: 2 months ago Posts: 60 |
Sheevaplug> setenv bootargs_ubi console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs Sheevaplug> setenv bootcmd_ubi ubi part rootfs; ubifsmount rootfs; ubifsload 0x00800000 /boot/uImage; ubifsload 0x01100000 /boot/uInitrd Sheevaplug> setenv bootcmd 'setenv bootargs $(bootargs_ubi); run bootcmd_ubi; bootm 0x800000 0x01100000' Sheevaplug> setenv mtdparts 'mtdparts=orion_nand:1M(u-boot),4M(uImage),-(root)'I do not like the Debian 2-stage boot process. I built my own minimal Debian 12 rootfs using debootstrap and debuerreotype that uses only about half the MTD flash rootfs partition. Then I built my own version of bodhi's 6.10.11 Kirkwood kernel to add UBUFS support and to compress the kernel modules (cuts them down from ~90 MB to ~30 MB). With his kernel, there is no need for the initramfs to boot a UBIFS rootfs.