Welcome! Log In Create A New Profile

Advanced

Debian on ARM Cortex A9

Posted by Chris 
Forum List Message List New Topic
Chris
Debian on ARM Cortex A9
April 07, 2024 04:14AM
Dear Community, thank you very much for your invested time in trying to help us get the most out of our hardware.

I would need your help in installing Debian on an Arm Cortex A9 with touch screen monitor (monitor is from Sigmatek company).
Till now, I have the following information (see also attached pictures):

- it seems to have a Linux installed on it, it runs from a micro-sd card with 3 partitions, bootldr containing uImage and uRamdisk files, a C partition containing (I think) the program from the manufacturer and a system which should be the Linux.
- it is booting from the card, but I think that the Linux is limited in some ways because I can't use all the commands like in a standard Linux.

I'm attaching some pictures, and I've found a some kind of boot-log also. 


Jan  1 00:00:30 sigmatek-arm syslog.info syslogd started: BusyBox v1.22.1 - Sigmatek
Jan  1 00:00:30 sigmatek-arm user.notice kernel: klogd started: BusyBox v1.22.1 (2022-09-29 18:44:34 CEST)
Jan  1 00:00:30 sigmatek-arm user.info kernel: Booting Linux on physical CPU 0x0
Jan  1 00:00:30 sigmatek-arm user.notice kernel: Linux version 3.10.53 (jenkins@7dec7c8bbf98) (gcc version 4.8.2 (GCC) ) #2 SMP PREEMPT Tue Nov 15 14:00:38 CET 2022
Jan  1 00:00:30 sigmatek-arm user.warn kernel: CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
Jan  1 00:00:30 sigmatek-arm user.warn kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Jan  1 00:00:30 sigmatek-arm user.info kernel: Machine: Freescale i.MX6 Quad/DualLite (Device Tree), model: Sigmatek TT1933-S Board
Jan  1 00:00:30 sigmatek-arm user.info kernel: cma: CMA: reserved 32 MiB at 2e000000
Jan  1 00:00:30 sigmatek-arm user.warn kernel: Memory policy: ECC disabled, Data cache writealloc
Jan  1 00:00:30 sigmatek-arm user.debug kernel: On node 0 totalpages: 131072
Jan  1 00:00:30 sigmatek-arm user.debug kernel: free_area_init_node: node 0, pgdat c085ff80, node_mem_map c0948000
Jan  1 00:00:30 sigmatek-arm user.debug kernel:   DMA zone: 1024 pages used for memmap
Jan  1 00:00:30 sigmatek-arm user.debug kernel:   DMA zone: 0 pages reserved
Jan  1 00:00:30 sigmatek-arm user.debug kernel:   DMA zone: 131072 pages, LIFO batch:31
Jan  1 00:00:30 sigmatek-arm user.info kernel: PERCPU: Embedded 10 pages/cpu @c0d60000 s18944 r8192 d13824 u40960
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pcpu-alloc: s18944 r8192 d13824 u40960 alloc=10*4096
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pcpu-alloc: [0] 0 [0] 1 
Jan  1 00:00:30 sigmatek-arm user.warn kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
Jan  1 00:00:30 sigmatek-arm user.notice kernel: Kernel command line: console=ttymxc1,115200 isolcpus=0 irqaffinity=1 threadirqs video=mxcfb0sigvid=1366x768 sigvid=1366x768 CPUname=`TT 1933-S` FirstUsbDrive=E root=/dev/mmcblk0p2 rw rootfstype=ext3 rootflags=data=journal rootw
Jan  1 00:00:30 sigmatek-arm user.info kernel: PID hash table entries: 2048 (order: 1, 8192 bytes)
Jan  1 00:00:30 sigmatek-arm user.info kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan  1 00:00:30 sigmatek-arm user.info kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan  1 00:00:30 sigmatek-arm user.info kernel: Memory: 512MB = 512MB total
Jan  1 00:00:30 sigmatek-arm user.notice kernel: Memory: 477204k/477204k available, 47084k reserved, 0K highmem
Jan  1 00:00:30 sigmatek-arm user.notice kernel: Virtual kernel memory layout:
Jan  1 00:00:30 sigmatek-arm user.notice kernel:     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Jan  1 00:00:30 sigmatek-arm user.notice kernel:     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
Jan  1 00:00:30 sigmatek-arm user.notice kernel:     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
Jan  1 00:00:30 sigmatek-arm user.notice kernel:     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
Jan  1 00:00:30 sigmatek-arm user.notice kernel:     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
Jan  1 00:00:30 sigmatek-arm user.notice kernel:     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
Jan  1 00:00:30 sigmatek-arm user.notice kernel:       .text : 0xc0008000 - 0xc07ccac8   (7955 kB)
Jan  1 00:00:30 sigmatek-arm user.notice kernel:       .init : 0xc07cd000 - 0xc0813a00   ( 283 kB)
Jan  1 00:00:30 sigmatek-arm user.notice kernel:       .data : 0xc0814000 - 0xc0861500   ( 310 kB)
Jan  1 00:00:30 sigmatek-arm user.notice kernel:        .bss : 0xc0861500 - 0xc09474f0   ( 920 kB)
Jan  1 00:00:30 sigmatek-arm user.info kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Jan  1 00:00:30 sigmatek-arm user.info kernel: Preemptible hierarchical RCU implementation.
Jan  1 00:00:30 sigmatek-arm user.info kernel: 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
Jan  1 00:00:30 sigmatek-arm user.info kernel: NR_IRQS:16 nr_irqs:16 16
Jan  1 00:00:30 sigmatek-arm user.info kernel: L310 cache controller enabled
Jan  1 00:00:30 sigmatek-arm user.info kernel: l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x02c50000, Cache size: 524288 B
Jan  1 00:00:30 sigmatek-arm user.info kernel: sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
Jan  1 00:00:30 sigmatek-arm user.info kernel: I-pipe, 396.000 MHz clocksource
Jan  1 00:00:30 sigmatek-arm user.info kernel: CPU identified as i.MX6DL, silicon rev 1.4
Jan  1 00:00:30 sigmatek-arm user.info kernel: Interrupt pipeline (release #7)
Jan  1 00:00:30 sigmatek-arm user.info kernel: Console: colour dummy device 80x30
Jan  1 00:00:30 sigmatek-arm user.info kernel: Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
Jan  1 00:00:30 sigmatek-arm user.info kernel: pid_max: default: 32768 minimum: 301
Jan  1 00:00:30 sigmatek-arm user.info kernel: Mount-cache hash table entries: 512
Jan  1 00:00:30 sigmatek-arm user.info kernel: CPU: Testing write buffer coherency: ok
Jan  1 00:00:30 sigmatek-arm user.info kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Jan  1 00:00:30 sigmatek-arm user.info kernel: I-pipe, 396.000 MHz timer
Jan  1 00:00:30 sigmatek-arm user.info kernel: Setting up static identity map for 0xc059c650 - 0xc059c6a8
Jan  1 00:00:30 sigmatek-arm user.warn kernel: CPU1: Booted secondary processor
Jan  1 00:00:30 sigmatek-arm user.info kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Jan  1 00:00:30 sigmatek-arm user.info kernel: I-pipe, 396.000 MHz timer
Jan  1 00:00:30 sigmatek-arm user.info kernel: Brought up 2 CPUs
Jan  1 00:00:30 sigmatek-arm user.info kernel: SMP: Total of 2 processors activated (3162.11 BogoMIPS).
Jan  1 00:00:30 sigmatek-arm user.info kernel: CPU: All CPU(s) started in SVC mode.
Jan  1 00:00:30 sigmatek-arm user.info kernel: devtmpfs: initialized
Jan  1 00:00:30 sigmatek-arm user.info kernel: pinctrl core: initialized pinctrl subsystem
Jan  1 00:00:30 sigmatek-arm user.info kernel: regulator-dummy: no parameters
Jan  1 00:00:30 sigmatek-arm user.info kernel: NET: Registered protocol family 16
Jan  1 00:00:30 sigmatek-arm user.info kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations
Jan  1 00:00:30 sigmatek-arm user.info kernel: Use WDOG1 as reset source
Jan  1 00:00:30 sigmatek-arm user.info kernel: syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
Jan  1 00:00:30 sigmatek-arm user.info kernel: vdd1p1: 800 <--> 1375 mV at 1125 mV 
Jan  1 00:00:30 sigmatek-arm user.info kernel: vdd3p0: 2800 <--> 3150 mV at 3000 mV 
Jan  1 00:00:30 sigmatek-arm user.info kernel: vdd2p5: 2000 <--> 2750 mV at 2425 mV 
Jan  1 00:00:30 sigmatek-arm user.info kernel: cpu: 725 <--> 1450 mV at 1150 mV 
Jan  1 00:00:30 sigmatek-arm user.info kernel: vddpu: 725 <--> 1450 mV at 1150 mV 
Jan  1 00:00:30 sigmatek-arm user.info kernel: vddsoc: 725 <--> 1450 mV at 1175 mV 
Jan  1 00:00:30 sigmatek-arm user.info kernel: syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered
Jan  1 00:00:30 sigmatek-arm user.info kernel: syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered
Jan  1 00:00:30 sigmatek-arm user.info kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
Jan  1 00:00:30 sigmatek-arm user.info kernel: hw-breakpoint: maximum watchpoint size is 4 bytes.
Jan  1 00:00:30 sigmatek-arm user.info kernel: imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
Jan  1 00:00:30 sigmatek-arm user.info kernel: bio: create slab <bio-0> at 0
Jan  1 00:00:30 sigmatek-arm user.info kernel: mxs-dma 110000.dma-apbh: initialized
Jan  1 00:00:30 sigmatek-arm user.info kernel: 2P8V: 2800 mV 
Jan  1 00:00:30 sigmatek-arm user.info kernel: 1P5V: 1500 mV 
Jan  1 00:00:30 sigmatek-arm user.info kernel: usb_otg_vbus: 5000 mV 
Jan  1 00:00:30 sigmatek-arm user.warn kernel: i2c-core: driver [max17135] using legacy suspend method
Jan  1 00:00:30 sigmatek-arm user.warn kernel: i2c-core: driver [max17135] using legacy resume method
Jan  1 00:00:30 sigmatek-arm user.notice kernel: SCSI subsystem initialized
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver usbfs
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver hub
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new device driver usb
Jan  1 00:00:30 sigmatek-arm user.info kernel: i2c i2c-0: IMX I2C adapter registered
Jan  1 00:00:30 sigmatek-arm user.info kernel: Linux video capture interface: v2.00
Jan  1 00:00:30 sigmatek-arm user.info kernel: pps_core: LinuxPPS API ver. 1 registered
Jan  1 00:00:30 sigmatek-arm user.info kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Jan  1 00:00:30 sigmatek-arm user.info kernel: PTP clock support registered
Jan  1 00:00:30 sigmatek-arm user.info kernel: imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
Jan  1 00:00:30 sigmatek-arm user.err kernel: mxc_ipu mxc_ipu: IPU memblock not available
Jan  1 00:00:30 sigmatek-arm user.err kernel: mxc_ipu mxc_ipu: IPU memblock not coherent
Jan  1 00:00:30 sigmatek-arm user.info kernel: MIPI CSI2 driver module loaded
Jan  1 00:00:30 sigmatek-arm user.info kernel: Advanced Linux Sound Architecture Driver Initialized.
Jan  1 00:00:30 sigmatek-arm user.info kernel: cfg80211: Calling CRDA to update world regulatory domain
Jan  1 00:00:30 sigmatek-arm user.info kernel: cfg80211: World regulatory domain updated:
Jan  1 00:00:30 sigmatek-arm user.info kernel: cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 00:00:30 sigmatek-arm user.info kernel: cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (2000 mBi, 0 mBm)
Jan  1 00:00:30 sigmatek-arm user.info kernel: cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (2000 mBi, 0 mBm)
Jan  1 00:00:30 sigmatek-arm user.info kernel: cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (2000 mBi, 0 mBm)
Jan  1 00:00:30 sigmatek-arm user.info kernel: cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
Jan  1 00:00:30 sigmatek-arm user.info kernel: cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
Jan  1 00:00:30 sigmatek-arm user.info kernel: cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (2000 mBi, 0 mBm)
Jan  1 00:00:30 sigmatek-arm user.info kernel: cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
Jan  1 00:00:30 sigmatek-arm user.info kernel: cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Jan  1 00:00:30 sigmatek-arm user.info kernel: pureg-dummy: no parameters
Jan  1 00:00:30 sigmatek-arm user.info kernel: Switching to clocksource ipipe_tsc
Jan  1 00:00:30 sigmatek-arm user.notice kernel: FS-Cache: Loaded
Jan  1 00:00:30 sigmatek-arm user.info kernel: imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00
Jan  1 00:00:30 sigmatek-arm user.info kernel: pci_bus 0000:00: root bus resource [io  0x1000-0x10000]
Jan  1 00:00:30 sigmatek-arm user.info kernel: pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff]
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:00:00.0: reg 10: [mem 0x00000000-0x000fffff]
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:00:00.0: reg 38: [mem 0x00000000-0x0000ffff pref]
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:00:00.0: supports D1
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold
Jan  1 00:00:30 sigmatek-arm user.info kernel: PCI: bus0: Fast back to back transfers disabled
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [??? 0x00000000 flags 0x0] (conflicts with (null) [??? 0x00000000 flags 0x0])
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:01:00.0: [8086:1533] type 00 class 0x020000
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:01:00.0: reg 10: [mem 0x00000000-0x000fffff]
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:01:00.0: reg 18: [io  0x0000-0x001f]
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:01:00.0: reg 1c: [mem 0x00000000-0x00003fff]
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:01:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Jan  1 00:00:30 sigmatek-arm user.info kernel: PCI: bus1: Fast back to back transfers disabled
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci_bus 0000:01: busn_res: can not insert [bus 01] under [??? 0x00000000 flags 0x0] (conflicts with (null) [??? 0x00000000 flags 0x0])
Jan  1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff]
Jan  1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0: BAR 8: assigned [mem 0x01100000-0x012fffff]
Jan  1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0: BAR 9: assigned [mem 0x01300000-0x013fffff pref]
Jan  1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0: BAR 6: assigned [mem 0x01400000-0x0140ffff pref]
Jan  1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0: BAR 7: assigned [io  0x1000-0x1fff]
Jan  1 00:00:30 sigmatek-arm user.info kernel: pci 0000:01:00.0: BAR 0: assigned [mem 0x01100000-0x011fffff]
Jan  1 00:00:30 sigmatek-arm user.info kernel: pci 0000:01:00.0: BAR 6: assigned [mem 0x01300000-0x013fffff pref]
Jan  1 00:00:30 sigmatek-arm user.info kernel: pci 0000:01:00.0: BAR 3: assigned [mem 0x01200000-0x01203fff]
Jan  1 00:00:30 sigmatek-arm user.info kernel: pci 0000:01:00.0: BAR 2: assigned [io  0x1000-0x101f]
Jan  1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0: PCI bridge to [bus 01]
Jan  1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0:   bridge window [io  0x1000-0x1fff]
Jan  1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0:   bridge window [mem 0x01100000-0x012fffff]
Jan  1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0:   bridge window [mem 0x01300000-0x013fffff pref]
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci_bus 0000:00: resource 4 [io  0x1000-0x10000]
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci_bus 0000:00: resource 5 [mem 0x01000000-0x01efffff]
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci_bus 0000:01: resource 1 [mem 0x01100000-0x012fffff]
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pci_bus 0000:01: resource 2 [mem 0x01300000-0x013fffff pref]
Jan  1 00:00:30 sigmatek-arm user.info kernel: NET: Registered protocol family 2
Jan  1 00:00:30 sigmatek-arm user.info kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Jan  1 00:00:30 sigmatek-arm user.info kernel: TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Jan  1 00:00:30 sigmatek-arm user.info kernel: TCP: Hash tables configured (established 4096 bind 4096)
Jan  1 00:00:30 sigmatek-arm user.info kernel: TCP: reno registered
Jan  1 00:00:30 sigmatek-arm user.info kernel: UDP hash table entries: 256 (order: 1, 8192 bytes)
Jan  1 00:00:30 sigmatek-arm user.info kernel: UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Jan  1 00:00:30 sigmatek-arm user.info kernel: NET: Registered protocol family 1
Jan  1 00:00:30 sigmatek-arm user.info kernel: RPC: Registered named UNIX socket transport module.
Jan  1 00:00:30 sigmatek-arm user.info kernel: RPC: Registered udp transport module.
Jan  1 00:00:30 sigmatek-arm user.info kernel: RPC: Registered tcp transport module.
Jan  1 00:00:30 sigmatek-arm user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan  1 00:00:30 sigmatek-arm user.debug kernel: PCI: CLS 64 bytes, default 64
Jan  1 00:00:30 sigmatek-arm user.info kernel: hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
Jan  1 00:00:30 sigmatek-arm user.info kernel: Bus freq driver module loaded
Jan  1 00:00:30 sigmatek-arm user.info kernel: futex hash table entries: 512 (order: 3, 32768 bytes)
Jan  1 00:00:30 sigmatek-arm user.info kernel: I-pipe: head domain Xenomai registered.
Jan  1 00:00:30 sigmatek-arm user.info kernel: Xenomai: hal/arm started.
Jan  1 00:00:30 sigmatek-arm user.info kernel: Xenomai: scheduling class idle registered.
Jan  1 00:00:30 sigmatek-arm user.info kernel: Xenomai: scheduling class rt registered.
Jan  1 00:00:30 sigmatek-arm user.info kernel: Xenomai: real-time nucleus v2.6.4 (Jumpin' Out) loaded.
Jan  1 00:00:30 sigmatek-arm user.info kernel: Xenomai: starting native API services.
Jan  1 00:00:30 sigmatek-arm user.info kernel: Xenomai: starting RTDM services.
Jan  1 00:00:30 sigmatek-arm user.info kernel: msgmni has been set to 996
Jan  1 00:00:30 sigmatek-arm user.info kernel: io scheduler noop registered
Jan  1 00:00:30 sigmatek-arm user.info kernel: io scheduler deadline registered
Jan  1 00:00:30 sigmatek-arm user.info kernel: io scheduler cfq registered (default)
Jan  1 00:00:30 sigmatek-arm user.info kernel: imx-weim 21b8000.weim: Driver registered.
Jan  1 00:00:30 sigmatek-arm user.info kernel: pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
Jan  1 00:00:30 sigmatek-arm user.info kernel: pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
Jan  1 00:00:30 sigmatek-arm user.debug kernel: pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded
Jan  1 00:00:30 sigmatek-arm user.info kernel: mxc_sdc_fb fb.22: register mxc display driver ldb
Jan  1 00:00:30 sigmatek-arm user.info kernel: mxc_sdc_fb fb.22: registered mxc display driver ldb
Jan  1 00:00:30 sigmatek-arm user.info kernel: imx-ipuv3 2400000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
Jan  1 00:00:30 sigmatek-arm user.info kernel: Console: switching to colour frame buffer device 171x48
Jan  1 00:00:30 sigmatek-arm user.warn kernel: imx-sdma 20ec000.sdma: no iram assigned, using external mem
Jan  1 00:00:30 sigmatek-arm user.info kernel: imx-sdma 20ec000.sdma: loaded firmware 1.1
Jan  1 00:00:30 sigmatek-arm user.info kernel: imx-sdma 20ec000.sdma: initialized
Jan  1 00:00:30 sigmatek-arm user.info kernel: Serial: IMX driver
Jan  1 00:00:30 sigmatek-arm user.info kernel: 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX
Jan  1 00:00:30 sigmatek-arm user.info kernel: console [ttymxc1] enabled
Jan  1 00:00:30 sigmatek-arm user.info kernel: serial: Freescale lpuart driver
Jan  1 00:00:30 sigmatek-arm user.info kernel: [drm] Initialized drm 1.1.0 20060810
Jan  1 00:00:30 sigmatek-arm user.info kernel: [drm] Initialized vivante 1.0.0 20120216 on minor 0
Jan  1 00:00:30 sigmatek-arm user.info kernel: brd: module loaded
Jan  1 00:00:30 sigmatek-arm user.info kernel: loop: module loaded
Jan  1 00:00:30 sigmatek-arm user.info kernel: at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
Jan  1 00:00:30 sigmatek-arm user.info kernel: libphy: Fixed MDIO Bus: probed
Jan  1 00:00:30 sigmatek-arm user.info kernel: tun: Universal TUN/TAP device driver, 1.6
Jan  1 00:00:30 sigmatek-arm user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan  1 00:00:30 sigmatek-arm user.info kernel: libphy: fec_enet_mii_bus: probed
Jan  1 00:00:30 sigmatek-arm user.info kernel: fec 2188000.ethernet eth0: registered PHC device 0
Jan  1 00:00:30 sigmatek-arm user.info kernel: igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.3-k
Jan  1 00:00:30 sigmatek-arm user.info kernel: igb: Copyright (c) 2007-2013 Intel Corporation.
Jan  1 00:00:30 sigmatek-arm user.warn kernel: PCI: enabling device 0000:01:00.0 (0140 -> 0142)
Jan  1 00:00:30 sigmatek-arm user.info kernel: igb 0000:01:00.0: added PHC on eth1
Jan  1 00:00:30 sigmatek-arm user.info kernel: igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
Jan  1 00:00:30 sigmatek-arm user.info kernel: igb 0000:01:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:50:f4:35:56:69
Jan  1 00:00:30 sigmatek-arm user.info kernel: igb 0000:01:00.0: eth1: PBA No: 000300-000
Jan  1 00:00:30 sigmatek-arm user.info kernel: igb 0000:01:00.0: Using legacy interrupts. 1 rx queue(s), 1 tx queue(s)
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver rtl8192cu
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver rt2800usb
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver rtl8150
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver r8152
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver asix
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver ax88179_178a
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver cdc_ether
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver cdc_eem
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver smsc75xx
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver smsc95xx
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver gl620a
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver net1080
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver plusb
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver cdc_subset
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver zaurus
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver MOSCHIP usb-ethernet driver
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver cx82310_eth
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver cdc_ncm
Jan  1 00:00:30 sigmatek-arm user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan  1 00:00:30 sigmatek-arm user.info kernel: ehci-pci: EHCI PCI platform driver
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver usb-storage
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver usbserial
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver usbserial_generic
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbserial: USB Serial support registered for generic
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver cp210x
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbserial: USB Serial support registered for cp210x
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver ftdi_sio
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbserial: USB Serial support registered for FTDI USB Serial Device
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver pl2303
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbserial: USB Serial support registered for pl2303
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver sigmatek_usb_fx
Jan  1 00:00:30 sigmatek-arm user.info kernel: ci_hdrc ci_hdrc.1: doesn't support gadget
Jan  1 00:00:30 sigmatek-arm user.info kernel: ci_hdrc ci_hdrc.1: EHCI Host Controller
Jan  1 00:00:30 sigmatek-arm user.info kernel: ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
Jan  1 00:00:30 sigmatek-arm user.info kernel: ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
Jan  1 00:00:30 sigmatek-arm user.info kernel: hub 1-0:1.0: USB hub found
Jan  1 00:00:30 sigmatek-arm user.info kernel: hub 1-0:1.0: 1 port detected
Jan  1 00:00:30 sigmatek-arm user.info kernel: i2c /dev entries driver
Jan  1 00:00:30 sigmatek-arm user.info kernel: imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
Jan  1 00:00:30 sigmatek-arm user.info kernel: sdhci: Secure Digital Host Controller Interface driver
Jan  1 00:00:30 sigmatek-arm user.info kernel: sdhci: Copyright(c) Pierre Ossman
Jan  1 00:00:30 sigmatek-arm user.info kernel: sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 00:00:30 sigmatek-arm user.warn kernel: sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode
Jan  1 00:00:30 sigmatek-arm user.info kernel: mmc0: no vqmmc regulator found
Jan  1 00:00:30 sigmatek-arm user.info kernel: mmc0: no vmmc regulator found
Jan  1 00:00:30 sigmatek-arm user.info kernel: mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
Jan  1 00:00:30 sigmatek-arm user.info kernel: mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
Jan  1 00:00:30 sigmatek-arm user.info kernel: cma: CMA: reserved 32 MiB at 2a000000
Jan  1 00:00:30 sigmatek-arm user.info kernel: mxc_vpu 2040000.vpu: VPU initialized
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver sigmatek_usb_led_tsw
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver r8188eu
Jan  1 00:00:30 sigmatek-arm user.warn kernel: Sigmatek KUtils Init
Jan  1 00:00:30 sigmatek-arm user.warn kernel: Sigmatek Utils Printk-Task running
Jan  1 00:00:30 sigmatek-arm user.warn kernel: RT-Socket-CAN 0.90.2 - (C) 2006 RT-Socket-CAN Development Team
Jan  1 00:00:30 sigmatek-arm user.info kernel: nf_conntrack version 0.5.0 (7968 buckets, 31872 max)
Jan  1 00:00:30 sigmatek-arm user.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 00:00:30 sigmatek-arm user.info kernel: ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
Jan  1 00:00:30 sigmatek-arm user.info kernel: arp_tables: (C) 2002 David S. Miller
Jan  1 00:00:30 sigmatek-arm user.info kernel: TCP: cubic registered
Jan  1 00:00:30 sigmatek-arm user.info kernel: NET: Registered protocol family 17
Jan  1 00:00:30 sigmatek-arm user.notice kernel: Bridge firewalling registered
Jan  1 00:00:30 sigmatek-arm user.info kernel: lib80211: common routines for IEEE802.11 drivers
Jan  1 00:00:30 sigmatek-arm user.debug kernel: lib80211_crypt: registered algorithm 'NULL'
Jan  1 00:00:30 sigmatek-arm user.debug kernel: lib80211_crypt: registered algorithm 'WEP'
Jan  1 00:00:30 sigmatek-arm user.debug kernel: lib80211_crypt: registered algorithm 'CCMP'
Jan  1 00:00:30 sigmatek-arm user.debug kernel: lib80211_crypt: registered algorithm 'TKIP'
Jan  1 00:00:30 sigmatek-arm user.notice kernel: Key type dns_resolver registered
Jan  1 00:00:30 sigmatek-arm user.info kernel: VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Jan  1 00:00:30 sigmatek-arm user.info kernel: usb_otg_vbus: disabling
Jan  1 00:00:30 sigmatek-arm user.info kernel: vddpu: disabling
Jan  1 00:00:30 sigmatek-arm user.info kernel: regulator-dummy: disabling
Jan  1 00:00:30 sigmatek-arm user.info kernel: g_serial gadget: Sigmatek PLC
Jan  1 00:00:30 sigmatek-arm user.info kernel: g_serial gadget: g_serial ready
Jan  1 00:00:30 sigmatek-arm user.err kernel: drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Jan  1 00:00:30 sigmatek-arm user.warn kernel: mmc0: host does not support reading read-only switch. assuming write-enable.
Jan  1 00:00:30 sigmatek-arm user.info kernel: ALSA device list:
Jan  1 00:00:30 sigmatek-arm user.info kernel:   No soundcards found.
Jan  1 00:00:30 sigmatek-arm user.info kernel: Waiting for root device /dev/mmcblk0p2...
Jan  1 00:00:30 sigmatek-arm user.info kernel: mmc0: new SD card at address 9b7b
Jan  1 00:00:30 sigmatek-arm user.info kernel: mmcblk0: mmc0:9b7b SU02G 1.84 GiB 
Jan  1 00:00:30 sigmatek-arm user.info kernel:  mmcblk0: p1 p2 p3 p4
Jan  1 00:00:30 sigmatek-arm user.info kernel: usb 1-1: new high-speed USB device number 2 using ci_hdrc
Jan  1 00:00:30 sigmatek-arm user.info kernel: hub 1-1:1.0: USB hub found
Jan  1 00:00:30 sigmatek-arm user.info kernel: hub 1-1:1.0: 7 ports detected
Jan  1 00:00:30 sigmatek-arm user.info kernel: usb 1-1.3: new full-speed USB device number 3 using ci_hdrc
Jan  1 00:00:30 sigmatek-arm user.info kernel: usb 1-1.5: new high-speed USB device number 4 using ci_hdrc
Jan  1 00:00:30 sigmatek-arm user.info kernel: usb-storage 1-1.5:1.0: USB Mass Storage device detected
Jan  1 00:00:30 sigmatek-arm user.info kernel: scsi0 : usb-storage 1-1.5:1.0
Jan  1 00:00:30 sigmatek-arm user.info kernel: usb 1-1.6: new low-speed USB device number 5 using ci_hdrc
Jan  1 00:00:30 sigmatek-arm user.info kernel: kjournald starting.  Commit interval 5 seconds
Jan  1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p2): using internal journal
Jan  1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p2): recovery complete
Jan  1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p2): mounted filesystem with journal data mode
Jan  1 00:00:30 sigmatek-arm user.info kernel: VFS: Mounted root (ext3 filesystem) on device 179:2.
Jan  1 00:00:30 sigmatek-arm user.info kernel: devtmpfs: mounted
Jan  1 00:00:30 sigmatek-arm user.notice kernel: scsi 0:0:0:0: Direct-Access     USB      Flash Disk       1100 PQ: 0 ANSI: 4
Jan  1 00:00:30 sigmatek-arm user.notice kernel: sd 0:0:0:0: [sda] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB)
Jan  1 00:00:30 sigmatek-arm user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan  1 00:00:30 sigmatek-arm user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
Jan  1 00:00:30 sigmatek-arm user.err kernel: sd 0:0:0:0: [sda] No Caching mode page found
Jan  1 00:00:30 sigmatek-arm user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan  1 00:00:30 sigmatek-arm user.err kernel: sd 0:0:0:0: [sda] No Caching mode page found
Jan  1 00:00:30 sigmatek-arm user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan  1 00:00:30 sigmatek-arm user.info kernel:  sda: sda1
Jan  1 00:00:30 sigmatek-arm user.err kernel: sd 0:0:0:0: [sda] No Caching mode page found
Jan  1 00:00:30 sigmatek-arm user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan  1 00:00:30 sigmatek-arm user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
Jan  1 00:00:30 sigmatek-arm user.info kernel: Freeing unused kernel memory: 280K (c07cd000 - c0813000)
Jan  1 00:00:30 sigmatek-arm user.err kernel: mmc0: Timeout waiting for hardware interrupt.
Jan  1 00:00:30 sigmatek-arm user.err kernel: mmcblk0: error -110 transferring data, sector 3862264, nr 8, cmd response 0x900, card status 0x80000b00
Jan  1 00:00:30 sigmatek-arm user.warn kernel: mmcblk0: retrying using single block read
Jan  1 00:00:30 sigmatek-arm user.info kernel: kjournald starting.  Commit interval 5 seconds
Jan  1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p4): using internal journal
Jan  1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p4): recovery complete
Jan  1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p4): mounted filesystem with ordered data mode
Jan  1 00:00:30 sigmatek-arm user.info kernel: kjournald starting.  Commit interval 5 seconds
Jan  1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p1): using internal journal
Jan  1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p1): recovery complete
Jan  1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p1): mounted filesystem with journal data mode
Jan  1 00:00:30 sigmatek-arm user.err kernel: UBIFS error (pid 135): ubifs_mount: cannot open "ubi0:C", error -19
Jan  1 00:00:30 sigmatek-arm user.err kernel: UBIFS error (pid 135): ubifs_mount: cannot open "ubi0:bootldr", error -19
Jan  1 00:00:30 sigmatek-arm daemon.info kernel: udevd[152]: starting version 182
Jan  1 00:00:30 sigmatek-arm user.info kernel: hidraw: raw HID events driver (C) Jiri Kosina
Jan  1 00:00:30 sigmatek-arm user.warn kernel: Sigmatek Touch: found eGalax
Jan  1 00:00:30 sigmatek-arm user.info kernel: input: Sigmatek USB Touchscreen USB:0eef:c000 as /devices/soc0/soc.1/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input0
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver usbhid
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbhid: USB HID core driver
Jan  1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver sigmatek-touch
Jan  1 00:00:30 sigmatek-arm user.info kernel: input: Logitech USB Keyboard as /devices/soc0/soc.1/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.6/1-1.6:1.0/input/input1
Jan  1 00:00:30 sigmatek-arm user.info kernel: hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-ci_hdrc.1-1.6/input0
Jan  1 00:00:30 sigmatek-arm user.info kernel: input: Logitech USB Keyboard as /devices/soc0/soc.1/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.6/1-1.6:1.1/input/input2
Jan  1 00:00:30 sigmatek-arm user.info kernel: hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-ci_hdrc.1-1.6/input1
Jan  1 00:00:30 sigmatek-arm user.warn kernel: FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Jan  1 00:00:30 sigmatek-arm user.warn kernel: checked rootfs, /dev/mmcblk0p2 - exit-code 0
Jan  1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p2): using internal journal
Jan  1 00:00:30 sigmatek-arm user.warn kernel: checked fs /mnt/drive-C, /dev/mmcblk0p4 - exit-code 0
Jan  1 00:00:30 sigmatek-arm user.info kernel: kjournald starting.  Commit interval 5 seconds
Jan  1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p4): using internal journal
Jan  1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p4): mounted filesystem with ordered data mode
Jan  1 00:00:30 sigmatek-arm user.warn kernel: checked fs /boot, /dev/mmcblk0p1 - exit-code 0
Jan  1 00:00:30 sigmatek-arm user.info kernel: kjournald starting.  Commit interval 5 seconds
Jan  1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p1): using internal journal
Jan  1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p1): mounted filesystem with journal data mode
Jan  1 00:00:30 sigmatek-arm user.info kernel: fec 2188000.ethernet eth0: Freescale FEC PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
Jan  1 00:00:34 sigmatek-arm user.notice kernel: L-insmod (481): Sigmatek LRT Driver: Lasal Runtime Support loaded (09.04.041_RC1-0-g6b8b63f)
Jan  1 00:00:35 sigmatek-arm user.info kernel: sigmatek_powerfail sigmatek_powerfail.23: found IRQ:168
Jan  1 00:00:35 sigmatek-arm user.info kernel: sigmatek_powerfail: Driver loaded
Jan  1 00:00:35 sigmatek-arm user.info kernel: Sigmatek PCIE: Driver loaded
Jan  1 00:00:35 sigmatek-arm user.info kernel: SIGMATEK-ARM: found sigmatek_sram device
Jan  1 00:00:35 sigmatek-arm user.info kernel: SIGMATEK-ARM: found SRAM MEM 0 resource 0x0e000000-0x0e07ffff
Jan  1 00:00:35 sigmatek-arm user.info kernel: SIGMATEK-ARM: sigmatek_sram Driver loaded
Jan  1 00:00:35 sigmatek-arm user.info kernel: SIGMATEK-ARM: mma8453q Driver loaded
Jan  1 00:00:35 sigmatek-arm user.info kernel: SIGMATEK-ARM: sigmatek_inoutput Driver loaded
Jan  1 00:00:35 sigmatek-arm user.info kernel: SIGMATEK: found CPU-Core Temperature Sensor (imx_thermal_zone)
Jan  1 00:00:35 sigmatek-arm user.info kernel: Sigmatek PLC-IMX: loaded (09.04.041_RC1-0-g6b8b63f)
Jan  1 00:00:35 sigmatek-arm user.info LRT-Config: (00:00:35.503795:477) RTC not available
Jan  1 00:00:35 sigmatek-arm user.warn kernel: LE-System (485): /proc/485/oom_adj is deprecated, please use /proc/485/oom_score_adj instead.
Jan  1 00:00:37 sigmatek-arm user.info LRT-Config: (00:00:37.857640:477) Display width:1368, height:768, bpp:16
Jan  1 00:00:38 sigmatek-arm user.notice LRT-Mgr: (00:00:38.590304:493) starting up version Linux-arm S3 Ver: 09.04.041 , Build:633 V of LRT-Manager
Jan  1 00:00:39 sigmatek-arm user.info LRT: (00:00:39.902541:495) multicore for rt/cy disabled
Jan  1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.411252:495) Starting up LRT (Lasal RunTime environment)
Jan  1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.411261:495)   LRT version      : Linux-arm S3 Ver: 09.04.041 , Build:633 V
Jan  1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.411269:495)   LRT GIT version  : HEAD-6b8b63f
Jan  1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.411274:495)   LRT built with   : sdk     from jenkins
Jan  1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.419771:495)   PLATFORM version : 202211151359
Jan  1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.419789:495)   XENOMAI version  : 2.6.4
Jan  1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.419794:495)   SDK version      : n.a.
Jan  1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.419799:495)   CPU name         : 'TT 1933-S'
Jan  1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.419804:495)   ALIAS name       : 'TT 1533'
Jan  1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.419812:495)   PLC Serial Number: 06075233
Jan  1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.419819:495)   FPGA version     : none
Jan  1 00:00:40 sigmatek-arm user.notice LRT: (00:00:40.420345:495) starting up NetBIOS Listener
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.421029:495) OSsslInit: OpenSSL library version and release date: OpenSSL 1.0.2j  26 Sep 2016
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.424973:495) Hardware feature:  Name:'TT 1933-S' Display/LED-Config:4 PlcType:IMX6 SF:0x1
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.425309:495) CAN subsystem running...
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.425320:495) No ECATM available
Jan  1 00:00:41 sigmatek-arm user.info kernel: X-LRT-Timer: Sigmatek LRT Driver: time-keeper: startup
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.432938:495) SoftPWM not available
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436678:495) ########## previous powerdown state ##########
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436685:495) # PDS: Reboot triggered by a Reboot command sent over the command line interface
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436693:495) # Date/Time: 1970-01-01 00:07:03
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436698:495) ##############################################
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436702:495) SRAM Info
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436707:495)   Physical-MEM, physical SRAM on device
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436713:495)   SRAM Start       : 0x0E000000, 524288
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436745:495)   UsrObjSramStart  : 0x0E000000, 507904
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436754:495)   UsrRetainStart   : 0x00000000, 0
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436763:495)   UsrRetainRamStart: 0x00000000, 0
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436771:495)   SysSramStart     : 0x0E07C000, 16384
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436780:495)   Physical SRAM    : 0x000000000E000000, 524288
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436797:495)   m-sram init      : mapped
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.442074:503) FS FileServerThread: started 0
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.730228:495) SD WriteStatistic: drive-0: sernum '029b70e2', 117600 sector-writes, 1099 operating-seconds, 0 sramdisk-writes
Jan  1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.767125:495) Using simple memory allocator for 'AppCode' heap. Size=10240 kB addr=0x60000000
Jan  1 00:00:41 sigmatek-arm user.notice LRT-Mgr: (00:00:41.782748:493) Connection Manager: listening at TCP port 1954
Jan  1 00:00:41 sigmatek-arm user.info LRT-Mgr: (00:00:41.814867:493) OSsslInit: OpenSSL library version and release date: OpenSSL 1.0.2j  26 Sep 2016
Jan  1 00:00:43 sigmatek-arm daemon.info init: Entering runlevel: 5
Jan  1 00:00:44 sigmatek-arm authpriv.warn dropbear[556]: Failed loading /etc/dropbear/dropbear_dss_host_key
Jan  1 00:00:44 sigmatek-arm authpriv.warn dropbear[556]: Failed loading /etc/dropbear/dropbear_ecdsa_host_key
Jan  1 00:00:44 sigmatek-arm authpriv.info dropbear[561]: Running in background
Jan  1 00:00:44 sigmatek-arm user.info LRT-Mgr: (00:00:44.442632:514) LslCLI_SetCAN:No CAN Interface 'CAN_1' Installed
Jan  1 00:00:47 sigmatek-arm user.crit LRT-Mgr: (00:00:47.505124:514) call to lrtLoadAppl() but prj is not available
Reply Quote
Attachments:
open | download - Screenshot 2024-04-07 104559.png (154.6 KB)
open | download - orig_1mb.jpg (994.6 KB)
open | download - orig1_1mb.jpg (989.6 KB)
bodhi
Re: Debian on ARM Cortex A9
April 07, 2024 05:53PM
Hi Chris,

Sorry, I don't have any IMX6 board, so I have not built kernel for this architecture.

Hopefully others will have info for you.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
Chris
Re: Debian on ARM Cortex A9
April 08, 2024 03:17AM
That would be nice. I would really appreciate that

Nobody out there who would like a challenge?

Or maybe just start me in the write way?
Reply Quote
Chris
Re: Debian on ARM Cortex A9
April 08, 2024 01:08PM
made an account at nxp, is where the chip is cumming from, but don't know where to start
Reply Quote
rayknight
Re: Debian on ARM Cortex A9
April 08, 2024 09:48PM
Based on the following from your boot log: 

Jan  1 00:00:30 sigmatek-arm user.info kernel: Machine: Freescale i.MX6 Quad/DualLite (Device Tree), model: Sigmatek TT1933-S Board

The device you have is likely this one SigmTek TT1933-S. I would suggest searching their website for newer firmware or contacting them to see if they have an updated SDK for the device. Failing that you could extract the DTS and attempt to update it to current standards.
Reply Quote
Chris
Re: Debian on ARM Cortex A9
April 09, 2024 12:19AM
I have the DTB file which is on the card
Do you mean this?
And how to extract?
Reply Quote
Attachments:
open | download - IMG_3696.png (487.6 KB)
Chris
Re: Debian on ARM Cortex A9
April 09, 2024 01:11PM
If I delete all the files from the system partition and copy from a Debian install CD and also the DTBS folder, then it does not boot at all ...
Reply Quote
rayknight
Re: Debian on ARM Cortex A9
April 09, 2024 08:36PM
Do you know how to build Linux kernel from source? Are you familiar with Device Tree Compiler? What I was suggesting was to either obtain the actual device tree source (.dts) file or as a last resort using the Device Tree Compiler tool to de-compile the DTB file to create a DTS file. Once you have a DTS it will likely need updating as what you have is for kernel 3.10.53 and you'll need to determine how the i.MX6 device trees have changed since that time and incorporate those changes. If you do not have experience with building bootable images for i.MX6 based devices you should probably do some research into how that is accomplished.

Your best bet is to see if the manufacturer has an available SDK which would save considerable time and effort. I'm not familiar with that vendor, but a vendor with a similar product has resources that covers booting and building distributions for its product at https://docs.embeddedts.com/TS-TPC-7990 which might prove helpful if your vendor doesn't provide similar documentation. You'll have to determine how your product differs from this system, but this should give you some hints on what to look for and how to build the various components of U-Boot and Linux.



Edited 1 time(s). Last edit at 04/09/2024 08:37PM by rayknight.
Reply Quote
Chris
Re: Debian on ARM Cortex A9
April 10, 2024 06:55AM
Dear rayknight,
I've written them an Email, but I don't think they will help.

I'm not familiar at all
I know only basics on Linux, when it comes to special I need point to point guidance.

I was thinking it would be easier to deal with this since there is already some kind of Linux on the card.

Thanks!
Reply Quote
Chris
Re: Debian on ARM Cortex A9
April 14, 2024 11:20AM
I have found the DTB file
How do I go on?

Thanks
Reply Quote
Attachments:
open | download - imx6dl-sigmatek-TT1933-S.dtb (57.1 KB)
Chris
Re: Debian on ARM Cortex A9
April 15, 2024 12:49AM
I have also found an LBI file which contains the "Linux" that is also on the SD card
and also a lot of DTB files inside
please see attached folder list of the contents
Reply Quote
Attachments:
open | download - Mappe1.xlsx (179.7 KB)
Chris
Re: Debian on ARM Cortex A9
April 15, 2024 04:58PM
I’ve tried to build a Linux kernel using the NXP guide but no luck. It won’t boot from the card
NXP

Also tried various pins to search for the UART (lost 2 days) with no luck

Any suggestions?

Thanks
BR Chris
Reply Quote
Chris
Re: Debian on ARM Cortex A9
May 01, 2024 01:59AM
I have found a way to access a console
the showenv is giving the following readings: 

CONSOLE=/dev/console
SHELL=/bin/sh
TERM=linux
prevlevel=N
INIT_VERSION=sysvinit-2.88
CPUname=`TT
PATH=/sbin:/bin:/usr/sbin:/usr/bin
runlevel=S
RUNLEVEL=S
PWD=/
VERBOSE=no
PREVLEVEL=N
previous=N
FirstUsbDrive=E
SHLVL=2
HOME=/
_=/home/root/LRTConfig.exe
LIBC_FATAL_STDERR_=1
DISPLAY=:0
SRAMFORMAT=2

I have tried to create a SD card with Buildroot, Uboot, Yocto but nothing works.
It just won't boot

Please advise.

Many thanks!
Reply Quote
Chris
Re: Debian on ARM Cortex A9
May 02, 2024 12:01PM
I have now also access to SSH with root
I really need help!

Thanks
Reply Quote
Newer Topic Older Topic
Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: