(WIP) Linux Kernel and rootfs 4.14.24 for Seagate Business Storage NAS (CNS3xxx) package May 28, 2015 03:03PM |
Admin Registered: 13 years ago Posts: 19,010 |
cd /media/sdb1 tar -xjf Debian-4.14.24-cns3xxxx-tld-1-rootfs-bodhi.tar.bz2 sync
rm /etc/ssh/ssh_host* ssh-keygen -A
linux-image-4.14.24-cns3xxxx-tld-1_1.0_armel.deb linux-headers-4.14.24-cns3xxxx-tld-1_1.0_armel.deb config-4.14.24-cns3xxx-tld-1 zImage-4.14.24-cns3xxxx-tld-1 linux-dtb-4.14.24-cns3xxx-tld-1.tar linux-4.14.24-cns3xxxx-tld-1.patch
linux-image-3.18.5-cns3xxx-tld-2_2.0_armel.deb config-3.18.5-cns3xxx-tld-2 zImage-3.18.5-cns3xxx-tld-2 linux-headers-3.18.5-cns3xxx-tld-2_2.0_armel.deb linux-3.18.5-cns3xxx-tld-2.patch
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package May 28, 2015 05:29PM |
Registered: 9 years ago Posts: 40 |
#Next two lines only for tftp booting setenv serverip 192.168.1.102;setenv tftp_serverip 192.168.1.102; setenv ipaddr 192.168.1.103 setenv bootcmd_load 'tftp 0x800000 uImage;tftp 0x1100000 uInitrd' #Next one line only for loading from drive setenv bootcmd_load 'scsi init;fatload scsi 0 0x800000 /uImage;fatload scsi 0 0x1100000 /uInitrd' setenv stdin serial;setenv stdout serial;setenv stderr serial;setenv verify n;setenv num_boot_tries 3;setenv bootargs_console console=ttyS0,38400 setenv bootdelay 15;setenv bootargs_root root=/dev/sda2 rootwait mem=256M;setenv arcNumber 2776 setenv bootcmd 'setenv bootargs $(bootargs_console) $(bootargs_root);run bootcmd_load;bootm 0x800000 0x1100000' run bootcmd
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package May 28, 2015 07:20PM |
Admin Registered: 13 years ago Posts: 19,010 |
ide reset
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package May 29, 2015 03:15AM |
Registered: 9 years ago Posts: 40 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package May 29, 2015 04:07AM |
Admin Registered: 13 years ago Posts: 19,010 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package May 31, 2015 10:36AM |
Registered: 12 years ago Posts: 62 |
[ 0.000000] Booting Linux on physical CPU 0x900 [ 0.000000] Linux version 3.18.5-cns3xxx-test-3 (root@debian-compile) (gcc version 4.9.2 ( 4.9.2-10) ) #8 SMP PREEMPT Sun May 31 17:01:32 CEST 2015 [ 0.000000] CPU: ARMv6-compatible processor [410fb024] revision 4 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Cavium Networks CNS3420 Validation Board [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] PERCPU: Embedded 9 pages/cpu @cfdeb000 s8192 r8192 d20480 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: root=/dev/sda1 mem=256M console=ttyS0,38400 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 245904K/262144K available (4959K kernel code, 271K rwdata, 1684K rodata, 204K init, 187K bss, 16240K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0684f8c (6644 kB) [ 0.000000] .init : 0xc0685000 - 0xc06b8000 ( 204 kB) [ 0.000000] .data : 0xc06b8000 - 0xc06fbd40 ( 272 kB) [ 0.000000] .bss : 0xc06fbd40 - 0xc072ab68 ( 188 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836480000000ns [ 0.000000] Console: colour dummy device 80x30 [ 0.200000] console [ttyS0] enabled [ 0.210000] Calibrating delay loop... 277.70 BogoMIPS (lpj=1388544) [ 0.290000] pid_max: default: 32768 minimum: 301 [ 0.300000] Security Framework initialized [ 0.310000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.320000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.330000] Initializing cgroup subsys net_cls [ 0.340000] CPU: Testing write buffer coherency: ok [ 0.350000] missing device node for CPU 0 [ 0.360000] CPU0: thread -1, cpu 0, socket -1, mpidr 900 [ 0.370000] Setting up static identity map for 0x4ddd58 - 0x4ddda4 [ 0.440000] Brought up 1 CPUs [ 0.440000] SMP: Total of 1 processors activated (277.70 BogoMIPS). [ 0.450000] CPU: All CPU(s) started in SVC mode. [ 0.460000] devtmpfs: initialized [ 0.480000] prandom: seed boundary self test passed [ 0.500000] prandom: 100 self tests passed [ 0.510000] regulator-dummy: no parameters [ 0.520000] NET: Registered protocol family 16 [ 0.530000] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.570000] cpuidle: using governor ladder [ 0.610000] cpuidle: using governor menu [ 0.620000] L2C: DT/platform modifies aux control register: 0x02040000 -> 0x02540000 [ 0.630000] L2C-310 cache controller enabled, 8 ways, 256 kB [ 0.640000] L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x06540000 [ 0.660000] vgaarb: loaded [ 0.670000] SCSI subsystem initialized [ 0.680000] usbcore: registered new interface driver usbfs [ 0.690000] usbcore: registered new interface driver hub [ 0.700000] usbcore: registered new device driver usb [ 0.710000] Switched to clocksource freerun [ 0.730000] NET: Registered protocol family 2 [ 0.750000] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.770000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) [ 0.790000] TCP: Hash tables configured (established 2048 bind 2048) [ 0.810000] TCP: reno registered [ 0.820000] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.840000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.860000] NET: Registered protocol family 1 [ 0.870000] RPC: Registered named UNIX socket transport module. [ 0.890000] RPC: Registered udp transport module. [ 0.900000] RPC: Registered tcp transport module. [ 0.920000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.940000] Unpacking initramfs... [ 1.840000] Freeing initrd memory: 6592K (c1100000 - c1770000) [ 1.860000] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.880000] Initialise system trusted keyring [ 1.890000] VFS: Disk quotas dquot_6.5.2 [ 1.900000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.930000] NFS: Registering the id_resolver key type [ 1.940000] Key type id_resolver registered [ 1.950000] Key type id_legacy registered [ 1.970000] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.990000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 2.000000] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 2.030000] msgmni has been set to 493 [ 2.040000] Key type big_key registered [ 2.050000] alg: No test for stdrng (krng) [ 2.070000] Key type asymmetric registered [ 2.080000] Asymmetric key parser 'x509' registered [ 2.090000] bounce: pool size: 64 pages [ 2.110000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.130000] io scheduler noop registered [ 2.140000] io scheduler deadline registered [ 2.150000] io scheduler cfq registered (default) [ 2.170000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.190000] serial8250: ttyS0 at MMIO 0x78000000 (irq = 45, base_baud = 1500000) is a 16550A [ 2.210000] platform ahci.0: Driver ahci requests probe deferral [ 2.230000] physmap platform flash device: 08000000 at 10000000 [ 2.270000] physmap-flash physmap-flash.0: map_probe failed [ 2.300000] libphy: Fixed MDIO Bus: probed [ 2.310000] usbcore: registered new interface driver usb-storage [ 2.330000] mousedev: PS/2 mouse device common for all mice [ 2.350000] i2c /dev entries driver [ 2.360000] hidraw: raw HID events driver (C) Jiri Kosina [ 2.380000] TCP: cubic registered [ 2.390000] NET: Registered protocol family 17 [ 2.400000] Key type dns_resolver registered [ 2.410000] PCIe: Port[0] Enable PCIe LTSSM [ 2.430000] PCIe: Port[0] Check data link layer... [ 2.950000] Device not found. [ 2.960000] PCIe: Port[1] Enable PCIe LTSSM [ 2.970000] PCIe: Port[1] Check data link layer... [ 3.500000] Device not found. [ 3.500000] Registering SWP/SWPB emulation handler [ 3.520000] Loading compiled-in X.509 certificates [ 3.530000] registered taskstats version 1 [ 3.550000] platform ahci.0: Driver ahci requests probe deferral [ 3.570000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.590000] Freeing unused kernel memory: 204K (c0685000 - c06b8000) Loading, please wait... [ 3.690000] udevd[59]: starting version 175 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Assembling all MD arrays ... mdadm: No devices listed in conf file were found. F[ 4.260000] device-mapper: uevent: version 1.0.3 ailure: failed t[ 4.280000] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com o assemble all arrays. done. done. Begin: Waiting for root file system ... done. Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/sd[ 36.770000] usbcore: registered new interface driver usbhid a1 does not exis[ 36.790000] usbhid: USB HID core driver t. Dropping to a shell! (initramfs) [ 110.230000] random: nonblocking pool is initialized
Linux version 4.0.0-cns3xxx-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #3 SMP PREEMPT Sun May 24 22:13:49 PDT 2015 CPU: ARMv6-compatible processor [410fb024] revision 4 (ARMv7), cr=00c5787d PCIe: Port[0] Enable PCIe LTSSM PCIe: Port[0] Check data link layer... Link up.
[ 2.410000] PCIe: Port[0] Enable PCIe LTSSM [ 2.430000] PCIe: Port[0] Check data link layer... [ 2.950000] Device not found. [ 2.960000] PCIe: Port[1] Enable PCIe LTSSM [ 2.970000] PCIe: Port[1] Check data link layer... [ 3.500000] Device not found.
Whitney # bootm 0x800000 enter do_eth_down!!! ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-2.6.35.13-cavm1.whitney-ec Created: 2015-03-04 21:33:17 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3247244 Bytes = 3.1 MB Load Address: 02000000 Entry Point: 02000000 Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35.13-cavm1.whitney-econa (blackdevil@anakondalaptop) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #25 Wed Mar 4 22:33:11 CET 2015 [ 0.000000] Whitney release v1.1-beta5 [ 0.000000] CPU: ARMv6-compatible processor [410fb024] revision 4 (ARMv7), cr=00c5387d [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine: Cavium Networks CNS3420 Validation Board [ 0.000000] Ignoring unrecognised tag 0x00000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: root=/dev/sda1 mem=256M console=ttyS0,38400 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] allocated 1310720 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 256MB = 256MB total [ 0.000000] Memory: 251620k/251620k available, 10524k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xfde00000 - 0xffe00000 ( 32 MB) [ 0.000000] vmalloc : 0xb0800000 - 0xe0000000 ( 760 MB) [ 0.000000] lowmem : 0xa0000000 - 0xb0000000 ( 256 MB) [ 0.000000] modules : 0x9f000000 - 0xa0000000 ( 16 MB) [ 0.000000] .init : 0xa0008000 - 0xa002a000 ( 136 kB) [ 0.000000] .text : 0xa002a000 - 0xa05d6000 (5808 kB) [ 0.000000] .data : 0xa0636000 - 0xa066cc60 ( 220 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:160 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [ttyS0] enabled [ 0.020000] Calibrating delay loop... 279.34 BogoMIPS (lpj=1396736) [ 0.260000] pid_max: default: 32768 minimum: 301 [ 0.270000] Mount-cache hash table entries: 512 [ 0.280000] Initializing cgroup subsys ns [ 0.290000] Initializing cgroup subsys cpuacct [ 0.300000] Initializing cgroup subsys memory [ 0.310000] Initializing cgroup subsys devices [ 0.320000] Initializing cgroup subsys freezer [ 0.330000] Initializing cgroup subsys net_cls [ 0.340000] Initializing cgroup subsys blkio [ 0.350000] CPU: Testing write buffer coherency: [ 0.360000] ok [ 0.360000] CNS3XXX: no. of cores (2) greater than configured maximum of 1 - clipping [ 0.380000] CPU1: Booted secondary processor [ 0.380000] <0> DP-core moving to WFI [ 0.380000] cvm_nas_init: cvm_nas_task init [ 0.390000] cvm_nas_init: proc init success [ 0.400000] devtmpfs: initialized [ 0.420000] ------------[ cut here ]------------ [ 0.430000] WARNING: at arch/arm/mm/dma-mapping.c:165 consistent_init+0x44/0xc8() [ 0.440000] Modules linked in: [ 0.450000] [<a00310e0>] (unwind_backtrace+0x0/0xe4) from [<a0475ec8>] (dump_stack+0x18/0x1c) [ 0.460000] [<a0475ec8>] (dump_stack+0x18/0x1c) from [<a0046434>] (warn_slowpath_common+0x54/0x6c) [ 0.470000] [<a0046434>] (warn_slowpath_common+0x54/0x6c) from [<a0046470>] (warn_slowpath_null+0x24/0x2c) [ 0.480000] [<a0046470>] (warn_slowpath_null+0x24/0x2c) from [<a000b5f4>] (consistent_init+0x44/0xc8) [ 0.490000] [<a000b5f4>] (consistent_init+0x44/0xc8) from [<a002a4c4>] (do_one_initcall+0x5c/0x1a4) [ 0.500000] [<a002a4c4>] (do_one_initcall+0x5c/0x1a4) from [<a0008a70>] (kernel_init+0xc8/0x178) [ 0.510000] [<a0008a70>] (kernel_init+0xc8/0x178) from [<a002be94>] (kernel_thread_exit+0x0/0x8) [ 0.520000] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.530000] NET: Registered protocol family 16 [ 0.540000] L310 cache controller enabled [ 0.550000] l2x0: 8 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x02540000, Cache size: 262144 B [ 0.560000] cns_rdma_init: start [ 0.570000] cns_rdma_init: reg1: virt=0xaf015568 [ 0.580000] cns_rdma_init: pre-allocating rdma_sg: 32*280=8960 [ 0.590000] cns_rdma_init: q1: virt=0xaf012a00, phy=0x2f012a00 -> 0x2f012bf0 [ 0.600000] cns_rdma_init: done, err=0 [ 0.610000] Cavium feature enabled: SOP, [ 0.640000] bio: create slab <bio-0> at 0 [ 0.660000] vgaarb: loaded [ 0.670000] SCSI subsystem initialized [ 0.680000] usbcore: registered new interface driver usbfs [ 0.690000] usbcore: registered new interface driver hub [ 0.700000] usbcore: registered new device driver usb [ 0.880000] raid6: int32x1 58 MB/s [ 1.060000] raid6: int32x2 73 MB/s [ 1.240000] raid6: int32x4 68 MB/s [ 1.420000] raid6: int32x8 71 MB/s [ 1.600000] raid6: CNS-RAID 397 MB/s [ 1.610000] raid6: using algorithm CNS-RAID (397 MB/s) [ 1.620000] Switching to clocksource timer1 [ 1.630000] Slow work thread pool: Starting up [ 1.640000] Slow work thread pool: Ready [ 1.650000] FS-Cache: Loaded [ 1.680000] NET: Registered protocol family 2 [ 1.690000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 1.700000] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 1.710000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 1.720000] TCP: Hash tables configured (established 8192 bind 8192) [ 1.730000] TCP reno registered [ 1.740000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 1.750000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 1.760000] NET: Registered protocol family 1 [ 1.770000] RPC: Registered udp transport module. [ 1.780000] RPC: Registered tcp transport module. [ 1.790000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.800000] CNS3XXX PCIe Host Control Driver [ 1.810000] =============================== [ 1.820000] CNS3XXX PCIe support both internal and external clock. [ 1.830000] However, incorrect selection may result in system hang. [ 1.840000] If booting hangs, please select choose [ 1.850000] CONFIG_CNS3XXX_INTERNAL_CLOCK_SOURCE [ 1.860000] instead. [ 1.860000] =============================== [ 1.870000] PCI-E0 uses external clock source. [ 1.880000] PCIe: Port[0] Enable PCIe LTSSM [ 1.890000] PCIe: Port[0] Check data link layer... [ 1.900000] Link up. [ 1.910000] PCIe: Set Bridge Max_Payload_Size to 128 byte [ 1.920000] PCIe: Set Bridge Max_Read_Request_Size to 128 byte [ 1.930000] PCIe: Set Device Max_Payload_Size to 128 byte [ 1.940000] PCIe: Set Device Max_Read_Request_Size to 128 byte [ 1.950000] PCI: bus0: Fast back to back transfers disabled [ 1.960000] PCI: bus1: Fast back to back transfers disabled [ 1.970000] PCIe0: Bridge found. [ 1.980000] PCI: enabling device 0000:00:00.0 (0140 -> 0143) [ 1.990000] PCIe0 map irq: 0000:00:00.00 slot 0, pin 1, irq: 87 [ 2.000000] PCIe0 map irq: 0000:01:00.00 slot 0, pin 1, irq: 61 [ 2.010000] pci 0000:00:00.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff] [ 2.020000] pci 0000:01:00.0: BAR 0: assigned [mem 0xa0000000-0xa0007fff 64bit] [ 2.030000] pci 0000:01:00.0: BAR 0: set to [mem 0xa0000000-0xa0007fff 64bit] (PCI address [0xa0000000-0xa0007fff] [ 2.050000] VFS: Disk quotas dquot_6.5.2 [ 2.060000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.070000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.080000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 2.090000] NTFS driver 2.1.29 [Flags: R/W]. [ 2.100000] fuse init (API version 7.14) [ 2.110000] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 2.120000] SGI XFS Quota Management subsystem [ 2.130000] GFS2 (built Mar 4 2015 20:04:16) installed [ 2.140000] msgmni has been set to 491 [ 2.150000] alg: No test for stdrng (krng) [ 2.160000] io scheduler noop registered [ 2.170000] io scheduler deadline registered (default) [ 2.190000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.200000] serial8250: ttyS0 at MMIO 0x78000000 (irq = 45) is a 16550A [ 2.220000] brd: module loaded [ 2.230000] loop: module loaded [ 2.240000] drbd: initialized. Version: 8.3.8 (api:88/proto:86-94) [ 2.250000] drbd: built-in [ 2.260000] drbd: registered as block device major 147 [ 2.270000] drbd: minor_table @ 0xaf18f3a0 [ 2.280000] Loading iSCSI transport class v2.0-870. [ 2.290000] iscsi: registered transport (tcp) [ 2.310000] cns3xxx_spi_probe: setup CNS3XXX SPI Controller in polling mode, w/o DMA [ 2.330000] SPI bit rate = 116/64 Mhz [ 2.340000] m25p80 spi1.0: found mx25l4005a, expected m25p80 [ 2.350000] m25p80 spi1.0: mx25l4005a (512 Kbytes) [ 2.360000] Creating 3 MTD partitions on "spi1.0": [ 2.370000] 0x000000000000-0x000000030000 : "SPI-UBoot" [ 2.380000] 0x000000030000-0x000000040000 : "SPI-UBootEnv" [ 2.390000] 0x000000040000-0x000000080000 : "SPI-FileSystem" [ 2.400000] CNS3XXX AHCI SATA low-level driver [ 2.410000] SATA Port0 Spread-spectrum : Disable [ 2.420000] SATA Port0 Spread-spectrum : Enable [ 2.430000] SATA Port1 Spread-spectrum : Disable [ 2.440000] SATA Port1 Spread-spectrum : Enable [ 2.470000] cns3xxx-ahci cns3xxx-ahci.0: forcing PORTS_IMPL to 0x3 [ 2.480000] CPU clock : 700 [ 2.490000] *** Timer 1ms: 100000(0x186a0) *** [ 2.500000] *** Set to: 350000(0x55730) *** [ 2.510000] cns3xxx-ahci cns3xxx-ahci.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.520000] cns3xxx-ahci cns3xxx-ahci.0: flags: ncq sntf pm led clo only pmp pio slum part [ 2.530000] scsi0 : cns3xxx-ahci [ 2.540000] scsi1 : cns3xxx-ahci [ 2.550000] ata1: SATA max UDMA/133 ahci bar m16777216@0x83000000 port 0x83000100 irq 65 [ 2.560000] ata2: SATA max UDMA/133 ahci bar m16777216@0x83000000 port 0x83000180 irq 65 [ 2.580000] tun: Universal TUN/TAP device driver, 1.6 [ 2.590000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.600000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.610000] [ 2.610000] drivers/usb/host/ehci-cns3xxx.c cns3xxx_ehci_probe [ 2.620000] cns3xxx-ehci cns3xxx-ehci.0: CNS3XXX EHCI Host Controller [ 2.630000] cns3xxx-ehci cns3xxx-ehci.0: new USB bus registered, assigned bus number 1 [ 2.640000] [ 2.640000] drivers/usb/host/ehci-cns3xxx.c cns3xxx_ehci_init [ 2.650000] cns3xxx_ehci_init,***Threshold OUT=0x60,IN=0x60 *** [ 2.690000] cns3xxx-ehci cns3xxx-ehci.0: irq 64, io mem 0x82000000 [ 2.720000] cns3xxx-ehci cns3xxx-ehci.0: USB 0.0 started, EHCI 1.00 [ 2.730000] hub 1-0:1.0: USB hub found [ 2.740000] hub 1-0:1.0: 1 port detected [ 2.750000] Initializing USB Mass Storage driver... [ 2.760000] usbcore: registered new interface driver usb-storage [ 2.770000] USB Mass Storage support registered. [ 2.780000] mice: PS/2 mouse device common for all mice [ 2.790000] CNS3XXX Real Time Clock, (c) 2009 Cavium Networks [ 2.800000] rtc irq:23 [ 2.810000] cns3xxx-rtc cns3xxx-rtc: rtc core: registered cns3xxx-rtc as rtc0 [ 2.820000] i2c /dev entries driver [ 2.840000] adt7475 0-002e: ADT7473 device, revision 0 [ 2.850000] adt7475 0-002e: Optional features: fan4 pwm2 [ 2.860000] CNS3XXX Watchdog Timer, noboot=0 margin=60 sec (nowayout= 0) [ 2.870000] watchdog: cns3xxx_wdt_probe [ 2.880000] watchdog irq = 30 [ 2.890000] watchdog start_regs = 0xB0820600 [ 2.960000] Watchdog timer frequency : 349.97MHz. [ 2.970000] ata1: SATA link down (SStatus 0 SControl 300) [ 2.980000] ata2: SATA link down (SStatus 0 SControl 300) [ 2.990000] md: linear personality registered for level -1 [ 3.000000] md: raid0 personality registered for level 0 [ 3.010000] md: raid1 personality registered for level 1 [ 3.020000] xor: measuring software checksum speed [ 3.080000] arm4regs : 932.800 MB/sec [ 3.140000] 8regs : 434.000 MB/sec [ 3.200000] 32regs : 492.000 MB/sec [ 3.260000] CNS-RAID : 932.800 MB/sec [ 3.270000] xor: using function: CNS-RAID (932.800 MB/sec) [ 3.280000] md: raid6 personality registered for level 6 [ 3.290000] md: raid5 personality registered for level 5 [ 3.300000] md: raid4 personality registered for level 4 [ 3.310000] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 3.320000] sdhci: Secure Digital Host Controller Interface driver [ 3.330000] sdhci: Copyright(c) Pierre Ossman [ 3.340000] sdhci-cns3xxx, (c) 2009 Cavium Networks [ 3.350000] mmc0: SDHCI controller on cns3xxx [sdhci-cns3xxx.0] using PIO [ 3.360000] n1_ssl_config_device: symbol_get failed [ 3.370000] Cavium device is not initialized1 [ 3.390000] TCP cubic registered [ 3.390000] NET: Registered protocol family 17 [ 3.400000] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 4 [ 3.430000] cns3xxx-rtc cns3xxx-rtc: setting system clock to 2015-05-31 16:45:35 UTC (1433090735) [ 3.670000] mmc0: new high speed SD card at address 0007 [ 3.680000] mmcblk0: mmc0:0007 SD256 246 MiB [ 3.690000] mmcblk0: p1 p2 p3 p4 [ 16.070000] md: Waiting for all devices to be available before autodetect [ 16.080000] md: If you don't use raid, use raid=noautodetect [ 16.090000] md: Autodetecting RAID arrays. [ 16.100000] md: Scanned 0 and added 0 devices. [ 16.110000] md: autorun ... [ 16.120000] md: ... autorun DONE. [ 16.130000] Root-NFS: No NFS server available, giving up. [ 16.140000] VFS: Unable to mount root fs via NFS, trying floppy. [ 16.150000] VFS: Cannot open root device "sda1" or unknown-block(2,0) [ 16.160000] Please append a correct "root=" boot option; here are the available partitions: [ 16.170000] 1f00 192 mtdblock0 (driver?) [ 16.180000] 1f01 64 mtdblock1 (driver?) [ 16.200000] 1f02 256 mtdblock2 (driver?) [ 16.210000] b300 251904 mmcblk0 driver: mmcblk [ 16.230000] b301 9765 mmcblk0p1 [ 16.240000] b302 10240 mmcblk0p2 [ 16.250000] b303 214016 mmcblk0p3 [ 16.260000] b304 17408 mmcblk0p4 [ 16.270000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0) [ 16.280000] [<a00310e0>] (unwind_backtrace+0x0/0xe4) from [<a0475ec8>] (dump_stack+0x18/0x1c) [ 16.290000] [<a0475ec8>] (dump_stack+0x18/0x1c) from [<a04764ec>] (panic+0x5c/0xdc) [ 16.300000] [<a04764ec>] (panic+0x5c/0xdc) from [<a0008ee0>] (mount_block_root+0x1d4/0x218) [ 16.310000] [<a0008ee0>] (mount_block_root+0x1d4/0x218) from [<a00090fc>] (mount_root+0xe0/0x124) [ 16.320000] [<a00090fc>] (mount_root+0xe0/0x124) from [<a00092a4>] (prepare_namespace+0x164/0x1c4) [ 16.330000] [<a00092a4>] (prepare_namespace+0x164/0x1c4) from [<a0008ae4>] (kernel_init+0x13c/0x178) [ 16.340000] [<a0008ae4>] (kernel_init+0x13c/0x178) from [<a002be94>] (kernel_thread_exit+0x0/0x8) [ 16.350000] kernel BUG at arch/arm/kernel/amp.c:318! [ 16.360000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 16.370000] pgd = a0004000 [ 16.380000] [00000000] *pgd=00000000 [ 16.390000] Internal error: Oops: 805 [#1] [ 16.390000] last sysfs file: [ 16.390000] Modules linked in: [ 16.390000] CPU: 0 Tainted: G W (2.6.35.13-cavm1.whitney-econa #25) [ 16.390000] PC is at __bug+0x24/0x30 [ 16.390000] LR is at release_console_sem+0x188/0x1a0 [ 16.390000] pc : [<a002e680>] lr : [<a0047284>] psr: 60000013 [ 16.390000] sp : af02bef0 ip : af02be28 fp : af02befc [ 16.390000] r10: a05499e3 r9 : af38b1a2 r8 : 00008000 [ 16.390000] r7 : 00000000 r6 : a0023bb8 r5 : af38b000 r4 : a066d378 [ 16.390000] r3 : 00000000 r2 : a063d3b4 r1 : a063d398 r0 : 0000003e [ 16.390000] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 16.390000] Control: 00c5787d Table: 2000400a DAC: 00000017 [ 16.390000] Process swapper (pid: 1, stack limit = 0xaf02a268) [ 16.390000] Stack: (0xaf02bef0 to 0xaf02c000) [ 16.390000] bee0: af02bf0c af02bf00 a002ffa8 a002e668 [ 16.390000] bf00: af02bf2c af02bf10 a04764f8 a002ff9c a0476590 af02bf34 af38b000 af38b000 [ 16.390000] bf20: af02bf94 af02bf40 a0008ee0 a04764a0 a054997f af02bf48 00000000 00000000 [ 16.390000] bf40: 00000000 00000000 6e6b6e75 2d6e776f 636f6c62 2c32286b 00002930 00000000 [ 16.390000] bf60: af02bf84 00000000 00000000 00000000 00000000 a002be94 00000013 00000000 [ 16.390000] bf80: 00000000 00000000 af02bfb4 af02bf98 a00090fc a0008d18 a000a1c4 a0009d54 [ 16.390000] bfa0: a066cf38 a0023bcd af02bfd4 af02bfb8 a00092a4 a0009028 af02bfd4 af02bfc8 [ 16.390000] bfc0: a002339c a002339c af02bff4 af02bfd8 a0008ae4 a000914c 00000000 00000000 [ 16.390000] bfe0: 00000000 a00089a8 00000000 af02bff8 a002be94 a00089b4 e2833090 ebfffad2 [ 16.390000] [<a002e680>] (__bug+0x24/0x30) from [<a002ffa8>] (smp_send_stop+0x18/0x20) [ 16.390000] [<a002ffa8>] (smp_send_stop+0x18/0x20) from [<a04764f8>] (panic+0x68/0xdc) [ 16.390000] [<a04764f8>] (panic+0x68/0xdc) from [<a0008ee0>] (mount_block_root+0x1d4/0x218) [ 16.390000] [<a0008ee0>] (mount_block_root+0x1d4/0x218) from [<a00090fc>] (mount_root+0xe0/0x124) [ 16.390000] [<a00090fc>] (mount_root+0xe0/0x124) from [<a00092a4>] (prepare_namespace+0x164/0x1c4) [ 16.390000] [<a00092a4>] (prepare_namespace+0x164/0x1c4) from [<a0008ae4>] (kernel_init+0x13c/0x178) [ 16.390000] [<a0008ae4>] (kernel_init+0x13c/0x178) from [<a002be94>] (kernel_thread_exit+0x0/0x8) [ 16.390000] Code: e59f0010 e1a01003 eb111fbb e3a03000 (e5833000) [ 16.400000] ---[ end trace 1b75b31a2719ed1e ]--- [ 16.410000] Kernel panic - not syncing: Attempted to kill init! [ 16.420000] [<a00310e0>] (unwind_backtrace+0x0/0xe4) from [<a0475ec8>] (dump_stack+0x18/0x1c) [ 16.430000] [<a0475ec8>] (dump_stack+0x18/0x1c) from [<a04764ec>] (panic+0x5c/0xdc) [ 16.440000] [<a04764ec>] (panic+0x5c/0xdc) from [<a0049394>] (do_exit+0x68/0x610) [ 16.450000] [<a0049394>] (do_exit+0x68/0x610) from [<a002ebfc>] (die+0x2a0/0x2e0) [ 16.460000] [<a002ebfc>] (die+0x2a0/0x2e0) from [<a0475f28>] (__do_kernel_fault.part.4+0x5c/0x7c) [ 16.470000] [<a0475f28>] (__do_kernel_fault.part.4+0x5c/0x7c) from [<a00328e8>] (do_page_fault+0x1d4/0x1ec) [ 16.480000] [<a00328e8>] (do_page_fault+0x1d4/0x1ec) from [<a00329c4>] (do_translation_fault+0x24/0xa0) [ 16.490000] [<a00329c4>] (do_translation_fault+0x24/0xa0) from [<a002a304>] (do_DataAbort+0x3c/0xd0) [ 16.500000] [<a002a304>] (do_DataAbort+0x3c/0xd0) from [<a002aa8c>] (__dabt_svc+0x4c/0x60) [ 16.510000] Exception stack(0xaf02bea8 to 0xaf02bef0) [ 16.520000] bea0: 0000003e a063d398 a063d3b4 00000000 a066d378 af38b000 [ 16.530000] bec0: a0023bb8 00000000 00008000 af38b1a2 a05499e3 af02befc af02be28 af02bef0 [ 16.540000] bee0: a0047284 a002e680 60000013 ffffffff [ 16.550000] [<a002aa8c>] (__dabt_svc+0x4c/0x60) from [<a002e680>] (__bug+0x24/0x30) [ 16.560000] [<a002e680>] (__bug+0x24/0x30) from [<a002ffa8>] (smp_send_stop+0x18/0x20) [ 16.570000] [<a002ffa8>] (smp_send_stop+0x18/0x20) from [<a04764f8>] (panic+0x68/0xdc) [ 16.580000] [<a04764f8>] (panic+0x68/0xdc) from [<a0008ee0>] (mount_block_root+0x1d4/0x218) [ 16.590000] [<a0008ee0>] (mount_block_root+0x1d4/0x218) from [<a00090fc>] (mount_root+0xe0/0x124) [ 16.600000] [<a00090fc>] (mount_root+0xe0/0x124) from [<a00092a4>] (prepare_namespace+0x164/0x1c4) [ 16.610000] [<a00092a4>] (prepare_namespace+0x164/0x1c4) from [<a0008ae4>] (kernel_init+0x13c/0x178) [ 16.620000] [<a0008ae4>] (kernel_init+0x13c/0x178) from [<a002be94>] (kernel_thread_exit+0x0/0x8) [ 16.630000] kernel BUG at arch/arm/kernel/amp.c:318! [ 16.640000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 16.650000] pgd = a0004000 [ 16.660000] [00000000] *pgd=00000000 [ 16.670000] Internal error: Oops: 805 [#2] [ 16.670000] last sysfs file: [ 16.670000] Modules linked in: [ 16.670000] CPU: 0 Tainted: G D W (2.6.35.13-cavm1.whitney-econa #25) [ 16.670000] PC is at __bug+0x24/0x30 [ 16.670000] LR is at release_console_sem+0x188/0x1a0 [ 16.670000] pc : [<a002e680>] lr : [<a0047284>] psr: 60000113 [ 16.670000] sp : af02bc88 ip : af02bbc0 fp : af02bc94 [ 16.670000] r10: a002e680 r9 : 00000000 r8 : af028be0 [ 16.670000] r7 : 00000000 r6 : 0000000b r5 : af02a000 r4 : a066d378 [ 16.670000] r3 : 00000000 r2 : a063d3b4 r1 : a063d398 r0 : 0000003e [ 16.670000] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 16.670000] Control: 00c5787d Table: 2000400a DAC: 00000015 [ 16.670000] Process swapper (pid: 1, stack limit = 0xaf02a268) [ 16.670000] Stack: (0xaf02bc88 to 0xaf02c000) [ 16.670000] bc80: af02bca4 af02bc98 a002ffa8 a002e668 af02bcc4 af02bca8 [ 16.670000] bca0: a04764f8 a002ff9c af02bca8 af02bccc af028be0 af02a000 af02bd14 af02bcd8 [ 16.670000] bcc0: a0049394 a04764a0 a054e38c 0000002b af028e24 a063ea64 af02bd04 00000001 [ 16.670000] bce0: af02bce0 af02bce0 00000000 00000001 a002e682 af02bd5a 00000000 00000017 [ 16.670000] bd00: 00000000 a002e680 af02bd8c af02bd18 a002ebfc a0049338 af02a268 0000000b [ 16.670000] bd20: a054aa88 00000008 6502bea8 30663935 20303130 30613165 33303031 31626520 [ 16.670000] bd40: 62663131 33652062 30333061 28203030 33383565 30303033 a0002029 a047657c [ 16.670000] bd60: a0569e6c 00000000 00000805 00000000 af02bea8 00000805 20000113 00000000 [ 16.670000] bd80: af02bda4 af02bd90 a0475f28 a002e968 af02bea8 af02bea8 af02bddc af02bda8 [ 16.670000] bda0: a00328e8 a0475ed8 00000009 0000000a a0034ae0 00000805 00000805 00000000 [ 16.670000] bdc0: af02bea8 00008000 20000113 a05499e3 af02bdfc af02bde0 a00329c4 a0032720 [ 16.670000] bde0: a00329a0 00000805 a063a68c 00000000 af02bea4 af02be00 a002a304 a00329ac [ 16.670000] be00: a002aad8 a002a00c a063d394 a063d398 a063d3b4 60000013 00000001 0000000f [ 16.670000] be20: af02be75 00000003 0000003e 00000000 a066d89d af02bec4 af02be28 af02be50 [ 16.670000] be40: a0047284 a004770c 60000013 ffffffff a0030d58 00000000 00000032 60000013 [ 16.670000] be60: af02bf48 205b0000 36312020 3035332e 5d303030 a0020020 00000013 00000000 [ 16.670000] be80: 00000000 00000000 ffffffff af02bedc a0023bb8 00000000 af02befc af02bea8 [ 16.670000] bea0: a002aa8c a002a2d4 0000003e a063d398 a063d3b4 00000000 a066d378 af38b000 [ 16.670000] bec0: a0023bb8 00000000 00008000 af38b1a2 a05499e3 af02befc af02be28 af02bef0 [ 16.670000] bee0: a0047284 a002e680 60000013 ffffffff af02bf0c af02bf00 a002ffa8 a002e668 [ 16.670000] bf00: af02bf2c af02bf10 a04764f8 a002ff9c a0476590 af02bf34 af38b000 af38b000 [ 16.670000] bf20: af02bf94 af02bf40 a0008ee0 a04764a0 a054997f af02bf48 00000000 00000000 [ 16.670000] bf40: 00000000 00000000 6e6b6e75 2d6e776f 636f6c62 2c32286b 00002930 00000000 [ 16.670000] bf60: af02bf84 00000000 00000000 00000000 00000000 a002be94 00000013 00000000 [ 16.670000] bf80: 00000000 00000000 af02bfb4 af02bf98 a00090fc a0008d18 a000a1c4 a0009d54 [ 16.670000] bfa0: a066cf38 a0023bcd af02bfd4 af02bfb8 a00092a4 a0009028 af02bfd4 af02bfc8 [ 16.670000] bfc0: a002339c a002339c af02bff4 af02bfd8 a0008ae4 a000914c 00000000 00000000 [ 16.670000] bfe0: 00000000 a00089a8 00000000 af02bff8 a002be94 a00089b4 e2833090 ebfffad2 [ 16.670000] [<a002e680>] (__bug+0x24/0x30) from [<a002ffa8>] (smp_send_stop+0x18/0x20) [ 16.670000] [<a002ffa8>] (smp_send_stop+0x18/0x20) from [<a04764f8>] (panic+0x68/0xdc) [ 16.670000] [<a04764f8>] (panic+0x68/0xdc) from [<a0049394>] (do_exit+0x68/0x610) [ 16.670000] [<a0049394>] (do_exit+0x68/0x610) from [<a002ebfc>] (die+0x2a0/0x2e0) [ 16.670000] [<a002ebfc>] (die+0x2a0/0x2e0) from [<a0475f28>] (__do_kernel_fault.part.4+0x5c/0x7c) [ 16.670000] [<a0475f28>] (__do_kernel_fault.part.4+0x5c/0x7c) from [<a00328e8>] (do_page_fault+0x1d4/0x1ec) [ 16.670000] [<a00328e8>] (do_page_fault+0x1d4/0x1ec) from [<a00329c4>] (do_translation_fault+0x24/0xa0) [ 16.670000] [<a00329c4>] (do_translation_fault+0x24/0xa0) from [<a002a304>] (do_DataAbort+0x3c/0xd0) [ 16.670000] [<a002a304>] (do_DataAbort+0x3c/0xd0) from [<a002aa8c>] (__dabt_svc+0x4c/0x60) [ 16.670000] Exception stack(0xaf02bea8 to 0xaf02bef0) [ 16.670000] bea0: 0000003e a063d398 a063d3b4 00000000 a066d378 af38b000 [ 16.670000] bec0: a0023bb8 00000000 00008000 af38b1a2 a05499e3 af02befc af02be28 af02bef0 [ 16.670000] bee0: a0047284 a002e680 60000013 ffffffff [ 16.670000] [<a002aa8c>] (__dabt_svc+0x4c/0x60) from [<a002e680>] (__bug+0x24/0x30) [ 16.670000] [<a002e680>] (__bug+0x24/0x30) from [<a002ffa8>] (smp_send_stop+0x18/0x20) [ 16.670000] [<a002ffa8>] (smp_send_stop+0x18/0x20) from [<a04764f8>] (panic+0x68/0xdc) [ 16.670000] [<a04764f8>] (panic+0x68/0xdc) from [<a0008ee0>] (mount_block_root+0x1d4/0x218) [ 16.670000] [<a0008ee0>] (mount_block_root+0x1d4/0x218) from [<a00090fc>] (mount_root+0xe0/0x124) [ 16.670000] [<a00090fc>] (mount_root+0xe0/0x124) from [<a00092a4>] (prepare_namespace+0x164/0x1c4) [ 16.670000] [<a00092a4>] (prepare_namespace+0x164/0x1c4) from [<a0008ae4>] (kernel_init+0x13c/0x178) [ 16.670000] [<a0008ae4>] (kernel_init+0x13c/0x178) from [<a002be94>] (kernel_thread_exit+0x0/0x8) [ 16.670000] Code: e59f0010 e1a01003 eb111fbb e3a03000 (e5833000) [ 16.680000] ---[ end trace 1b75b31a2719ed1f ]--- [ 16.690000] Fixing recursive fault but reboot is needed!
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package June 02, 2015 12:06AM |
Admin Registered: 13 years ago Posts: 19,010 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package June 02, 2015 01:21AM |
Registered: 12 years ago Posts: 62 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package June 02, 2015 03:18AM |
Admin Registered: 13 years ago Posts: 19,010 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package June 02, 2015 07:07AM |
Admin Registered: 13 years ago Posts: 19,010 |
CONFIG_SATA_AHCI CONFIG_SATA_AHCI_PLATFORM
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package June 02, 2015 10:06AM |
Registered: 12 years ago Posts: 62 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package June 02, 2015 12:03PM |
Admin Registered: 13 years ago Posts: 19,010 |
> CONFIG_SATA_AHCI > CONFIG_SATA_AHCI_PLATFORM >> It juste for test, i test a lot of combination in
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package June 04, 2015 04:29PM |
Registered: 12 years ago Posts: 62 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package June 04, 2015 11:48PM |
Admin Registered: 13 years ago Posts: 19,010 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package June 08, 2015 05:10PM |
Registered: 12 years ago Posts: 62 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package June 08, 2015 10:46PM |
Admin Registered: 13 years ago Posts: 19,010 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package June 09, 2015 08:35AM |
Registered: 12 years ago Posts: 62 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package July 13, 2015 02:52PM |
Registered: 9 years ago Posts: 40 |
HOSTCC scripts/sortextable In file included from scripts/sortextable.c:31:0: /home/yama/Downloads/kernel/linux-headers-3.18.5-cns3xxx-tld-2_2.0_armel/usr/src/linux-headers-3.18.5-cns3xxx-tld-2/include/linux/unaligned/be_byteshift.h:6:1: error: unknown type name ‘u16’ static inline u16 __get_unaligned_be16(const u8 *p) ^ /home/yama/Downloads/kernel/linux-headers-3.18.5-cns3xxx-tld-2_2.0_armel/usr/src/linux-headers-3.18.5-cns3xxx-tld-2/include/linux/unaligned/be_byteshift.h:6:1: error: unknown type name ‘u8’ /home/yama/Downloads/kernel/linux-headers-3.18.5-cns3xxx-tld-2_2.0_armel/usr/src/linux-headers-3.18.5-cns3xxx-tld-2/include/linux/unaligned/be_byteshift.h:11:1: error: unknown type name ‘u32’ static inline u32 __get_unaligned_be32(const u8 *p) ...
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package July 13, 2015 05:32PM |
Admin Registered: 13 years ago Posts: 19,010 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package July 15, 2015 03:36PM |
Registered: 9 years ago Posts: 40 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package July 16, 2015 05:48AM |
Registered: 9 years ago Posts: 295 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package August 09, 2015 02:16AM |
Registered: 9 years ago Posts: 5 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package August 09, 2015 03:30AM |
Admin Registered: 13 years ago Posts: 19,010 |
printenv
mount df -h
e2label /dev/sdb1 cat /media/sdb1/fstab fdisk -l
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package August 09, 2015 03:46AM |
Registered: 9 years ago Posts: 5 |
Quote
Cirrus model:(SENTINEL) release v1.3
CPU: Cavium Networks CNS3000
ID Code: 410fb024 (Part number: 0xB02, Revision number: 4)
CPU ID: 900
Chip Version: c
DRAM: 512 MB
Parallel Flash: 0 kB
Flash Manufacturer: MX
Serial Flash: 512 kB
Serial Flash:
Bank # 1: Nb pages: 2048 Page Size: 256
Size: 524288 bytes, Logical address: 0x60000000
Area 0: 60000000 to 60FFFFFF SPI flash
In: serial
Out: serial
Err: serial
CPU works at 700 MHz (700/1/1)
DDR2 Speed is 400 MHz
Restoring RTC
Hit any
Whitney #
Whitney #
Whitney # riu un se bootcmd
Unknown command 'riun' - try 'help'
Whitney # run bootcmd
Initialize SCSI
AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part
set feature error!
scanning bus for devices...
Supprt LBA48 addressing.
timeout exit!
Device 0: (0:0) Vendor: ATA Prod.: TOSHIBA MK6465GS Rev: GH10
Type: Hard Disk
ted: 2015-08-09 8:16:32 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2296600 Bytes = 2.2 MB
Load Address: 02000000
Entry Point: 02000000
Loading Koot@remote) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #4 PREEMPT Sun Aug 9 18:16:28 AEST 2015
CPU: ARMv6-compatible processor [410fb024] revision 4 (ARMv7), cr=00c5787d
CP/ VIPT nng data IPT aliatructionMachine:Networks Validatd
Memor: Data cteback
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: console=ttyS0,38400 root=/dev/sda3 rootwait mem=256M noinitrd
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 255156K/262144K available (3259K kernel code, 139K rwdata, 1020K rodata, 152K init, 77K bss, 6988K reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xffe00048 kB)
loc : 0x - 0xff0( 744 MBowmem :000 - 0x ( 256 module000000 -000 (
[72C .xc000800he hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x334f88 - 0x334fd4
devtmpfs: initialized
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
L2C: DT/platform modifies aux control register: 0x02040000 -> 0x02540000
L2C-310 cache controller enabled, 8 ways, 256 kB
L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x06540000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switched to clocksource freerun
FS-Cache: Loaded
futex hash table entries: 256 (order: -1, 3072 bytes)
msgmni has been set to 498
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x78000000 (irq = 45, base_baud = 1500000) is a 16550A
brd: module loaded
loop: module loaded
mGine mflash driver, (c) 2008 mGine Co.
ahci ahci.0: forcing PORTS_IMPL to 0x3
ahci ahci.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode
ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc
scsi host0: ahci_platform
scsi host1: ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x83000000-0x83ffffff] port 0x100 irq 65
ata2: SATA max UDMA/133 mmio [mem 0x83000000-0x83ffffff] port 0x180 irq 65
physmap platform flash device: 08000000 at 10000000
physmap-flash physmap-flash.0: map_probe failed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform ehci-platform.0: EHCI Host Controller
ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
ehci-platform ehci-platform.0: irq 64, io mem 0x82000000
ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
I2O subsystem v1.325
i2o: max drivers = 8
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
sd 0:0:0] Attachdisk
ot found Port[1]PCIe LTS: Port[1data lin.. not fouEXT3-fs error: cmount be unsuppoional fe240)
EXda3): erldn't mouse of ued optioures (24EXT4-fs recoverye
(sda3): filesystordered e. Opts:
[32CVFS: Moot (ext4tem) on :3.
: mounteng unuse memory:0436000 00)
iled forfs on /slinux: file or y
version ting[[36min9m] Usinle-styleent bootevel S.
[39m
[36m[....] Synthesizing the initial hotplug events...[?25l
[[32m ok [39m[44C[36m[?12l[?25hdone.
[39m
[36mk [39m[47C[36mdone.
[39m
[36mEXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[39m
[36m[....] Activating lvm and md swap...[?25l
[[32m ok [39m[31C[36m[?12l[?25hdone.dress family not supported by protocol
[39m
[36mCannot find device "lo"
[39m
[36mFailed to bring up lo.
[39m
[36mCan't initialize context: address family not supported
[39m
[36mIf you think you have received this message dleaning up temporary files...[?25l
[[32m ok [39m[69C[36m[?12l[?25h.
[39m
[36mINIT: Entering runlevel: 2
[39m
[36m[info[39m] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1486 (syslogd)
[?25l[ortmanot runn[?25l[33mwa9m
[39m[33m(wa[39;49m
[....] Ning NFS aemon: ns. ...
[[33mwarn[21C[?12l[?25h33m(warn9;49m
[39m
[33m^[....] SNTP serv[?25l
[[32m 49m[25C[33m
[39m
[33m....] Starting OpenBSD [?12l[?25h[39m[?1l>[24;1H
[?1049l[detached from 1104.pts-0.OpenWrt]
root@OpenWrt:~# killall screen
root@OpenWrt:~#
root@OpenWrt:~# killall screen[J
root@OpenWrt:~# screen /dev/ttyS0 38400[J
/var/run/utmp: No such file or directory
[!p[?3;4l[4l>[?1049h[4l[?1h=[0m(B[1;24r[H[2J[H[2J
U-Boot 2008.10-mpcore (Nov 27 2012 - 02:15:26)
Cirrus model:(SENTINEL) release v1.3
CPU: Cavium Networks CNS3000
ID Code: 410fb024 (Part number: 0xB02, Revision number: 4)
CPU ID: 900
Chip Version: c
DRAM: 512 MB
Parallel Flash: 0 kB
Flash Manufacturer: MX
Serial Flash: 512 kB
Serial Flash:
Bank # 1: Nb pages: 2048 Page Size: 256
Size: 524288 bytes, Logical address: 0x60000000
Area 0: 60000000 to 60FFFFFF SPI flash
In: serial
Out: serial
Err: serial
CPU works at 700 MHz (700/1/1)
DDR2 Speed is 400 MHz
Restoring RTC
Hit any key to stop autoboot: 15 0
Whitney # print boo ev nv bootcmd
bootcmd=setenv bootargs $(bootargs_console) $(bootargs_root);run bootcmd_load;bootm 0x800000
Whitney # run bootcmd
Initialize SCSI
AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part
set feature error!
scanning bus for devices...
Supprt LBA48 addressing.
timeout exit!
Device 0: (0:0) Vendor: ATA Prod.: TOSHIBA MK6465GS Rev: GH10
Type: Hard Disk
Supports 48-bit addressing
Capacity: 610480.3 MB = 596.1 GB (1250263728 x 512)
reading /uImage
2296664 bytes read
reading /uInitrd
6535284 bytes read
enter do_eth_down!!!
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux-3.18.5-tld-2
Created: 2015-08-09 8:16:32 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2296600 Bytes = 2.2 MB
Load Address: 02000000
Entry Point: 02000000
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.18.5-tld-2 (root@remote) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #4 PREEMPT Sun Aug 9 18:16:28 AEST 2015
CPU: ARMv6-compatible processor [410fb024] revision 4 (ARMv7), cr=00c5787d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Cavium Networks CNS3420 Validation Board
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: console=ttyS0,38400 root=/dev/sda3 rootwait mem=256M noinitrd
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 255156K/262144K available (3259K kernel code, 139K rwdata, 1020K rodata, 152K init, 77K bss, 6988K reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0435f7c (4280 kB)
.init : 0xc0436000 - 0xc045c000 ( 152 kB)
.data : 0xc045c000 - 0xc047ee40 ( 140 kB)
.bss : 0xc047ee40 - 0xc0492328 ( 78 kB)
Preemptible hierarchical RCU implementation.
[8CAdditional per-CPU info printed with stalls.
NR_IRQS:16 nr_irqs:16 16
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836480000000ns
Console: colour dummy device 80x30
console [ttyS0] enabled
Calibrating delay loop... 277.70 BogoMIPS (lpj=1388544)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x334f88 - 0x334fd4
devtmpfs: initialized
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
L2C: DT/platform modifies aux control register: 0x02040000 -> 0x02540000
L2C-310 cache controller enabled, 8 ways, 256 kB
L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x06540000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switched to clocksource freerun
FS-Cache: Loaded
futex hash table entries: 256 (order: -1, 3072 bytes)
msgmni has been set to 498
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x78000000 (irq = 45, base_baud = 1500000) is a 16550A
brd: module loaded
loop: module loaded
mGine mflash driver, (c) 2008 mGine Co.
ahci ahci.0: forcing PORTS_IMPL to 0x3
ahci ahci.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode
ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc
scsi host0: ahci_platform
scsi host1: ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x83000000-0x83ffffff] port 0x100 irq 65
ata2: SATA max UDMA/133 mmio [mem 0x83000000-0x83ffffff] port 0x180 irq 65
physmap platform flash device: 08000000 at 10000000
physmap-flash physmap-flash.0: map_probe failed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform ehci-platform.0: EHCI Host Controller
ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
ehci-platform ehci-platform.0: irq 64, io mem 0x82000000
ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
I2O subsystem v1.325
i2o: max drivers = 8
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
PCIe: Port[0] Enable PCIe LTSSM
PCIe: Port[0] Check data link layer...
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: TOSHIBA MK6465GSXN, GH101M, max UDMA/100
ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6465GS 1M PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
Device not found.
PCIe: Port[1] Enable PCIe LTSSM
PCIe: Port[1] Check data link layer...
Device not found.
EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (244)
EXT4-fs (sda3): recovery complete
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:3.
devtmpfs: mounted
Freeing unused kernel memory: 152K (c0436000 - c045c000)
Mount failed for selinuxfs on /sys/fs/selinux: No such file or directory
INIT: version 2.88 booting
[[36minfo[39m] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevderror getting socket: Address family not supported by protocol
error initializing udev control socketerror initializing udev control socket
[....] 1 ...[?25l
[[33mwarn[39m[7C[?12l[?25h [33m(warning).[39m
[....] Waiting 15 seconds and trying to continue anyway ...[?25l
[[33mwarn[39m[54C[?12l[?25h [33m(warning).[39m
[....] Synthesizing the initial hotplug events...[?25l
[[32m ok [39m[44C[?12l[?25hdone.
[....] Waiting for /dev to be fully populated...error getting socket: Address family not supported by protocol
[?25l[[32m ok [39m
[?12l[?25hdone.
[....] Activating swap...[?25l
[[32m ok [39m[20C[?12l[?25hdone.
random: nonblocking pool is initialized
EXT4-fs (sda3): re-mounted. Opts: (null)
[....] Checking root file system...fsck from util-linux 2.25.2
/run/rootdev: clean, 14364/303104 files, 183406/1210880 blocks (check in 4 mounts)
[?25l[[32m ok [39m
[?12l[?25hdone.
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[....] Activating lvm and md swap...[?25l
[[32m ok [39m[31C[?12l[?25hdone.
[....] Checking file systems...fsck from util-linux 2.25.2
[?25l[[32m ok [39m
[?12l[?25hdone.
[....] Cleaning up temporary files... /tmp[?25l
[[32m ok [39m[37C[?12l[?25h.
[....] Loading kernel modules...[?25l
[[32m ok [39m[27C[?12l[?25hdone.
[....] Mounting local filesystems...[?25l
[[32m ok [39m[31C[?12l[?25hdone.
[....] Activating swapfile swap...[?25l
[[32m ok [39m[29C[?12l[?25hdone.
[....] Cleaning up temporary files...[?25l
[[32m ok [39m[32C[?12l[?25h.
[....] Setting kernel variables ...[?25l
[[32m ok [39m[30C[?12l[?25hdone.
[....] Configuring network interfaces...error getting socket: Address family not supported by protocol
Cannot find device "lo"
Failed to bring up lo.
Can't initialize context: address family not supported
If you think you have received this message due to a bug rather
than a configuration issue please read the section on submitting
bugs on either our web page at www.isc.org or in the README file
before submitting a bug. These pages explain the proper
process and the information we find helpful for debugging..
exiting.
Failed to bring up eth0.
[?25l[[32m ok [39m
[?12l[?25hdone.
rpcbind: cannot create socket for local
rpcbind: cannot create socket for udp
rpcbind: cannot create socket for tcp
rpcbind: cannot create socket for udp6
rpcbind: cannot create socket for tcp6
[....] Starting rpcbind daemon...[?25l
[[32m ok [39m[28C[?12l[?25h.
[....] Starting NFS common utilities: statd
[....] Not starting: portmapper is not running ...[?25l
[[33mwarn[39m[45C[?12l[?25h [33m(warning).[39m
[....] Cleaning up temporary files...[?25l
[[32m ok [39m[32C[?12l[?25h.
INIT: Entering runlevel: 2
[[36minfo[39m] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
[?25l[[31mFAIL[39m
[?12l[?25h [31mfailed![39m
[....] Starting system message bus: dbusFailed to start message bus: Failed to open socket: Address family not supported by protocol
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1485 (klogd)
[?25l[[32m ok [39m
[?12l[?25h.
[....] Starting NTP server: ntpd[?25l
[[32m ok [39m[27C[?12l[?25h.
[....] Starting NFS common utilities: statd
[....] Not starting: portmapper is not running ...[?25l
[[33mwarn[39m[45C[?12l[?25h [33m(warning).[39m
[....] Not starting NFS kernel daemon: no exports. ...[?25l
[[33mwarn[39m[49C[?12l[?25h [33m(warning).[39m
[....] Starting OpenBSD Secure Shell server: sshd[?25l
[[32m ok [39m[44C[?12l[?25h.
[....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemonTimeout reached while wating for return value
Could not receive return value from daemon process.
[?25l[[33mwarn[39m
[?12l[?25h [33m(warning).[39m
[....] startpar: service(s) returned failure: busybox-syslogd dbus ...[?25l
[[31mFAIL[39m[65C[?12l[?25h [31mfailed![39m
¡þȬæÊ(ÃÍøzçàîø
Quote
Whitney # printenv
baudrate=38400
ethaddr=00:11:22:4F:54:54
ipaddr=192.168.1.2
serverip=192.168.1.100
port=0
netboot_cmd=tftp 0x4000000 bootpImage; go 0x4000000
boardtest_state_memory=none
cpu_clock=700
netmask=255.255.0.0
bootfile="/tftpboot/uImage"
tftp_bsize=512
udp_frag_size=512
whitney_state=saved
mfgtest_state=final_tested_ok
netboot=0
mfgmodel=Seagate Central
model_name=cirrus_v1
current_kernel=kernel1
rtclog=54bf9589
filesize=63B874
bootargs=console ttyS0,38400 mem=256M root=/dev/sda3 rw noinitrd
bootcmd_load=scsi init;fatload scsi 0 0x800000 /uImage;fatload scsi 0 0x1100000 /uInitrd
num_boot_tries=3
bootargs_console=console=ttyS0,38400
bootdelay=15
arcNumber=2776
bootargs_root=root=/dev/sda3 rootwait mem=256M noinitrd
bootcmd=setenv bootargs $(bootargs_console) $(bootargs_root);run bootcmd_load;bootm 0x800000
stdin=serial
stdout=serial
stderr=serial
verify=n
aha! i've found the codeview! /dev/root / ext2 noatime,errors=remount-ro /tmpfs /tmp tmpfs defaults
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package August 09, 2015 03:56AM |
Admin Registered: 13 years ago Posts: 19,010 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package August 09, 2015 04:00AM |
Registered: 9 years ago Posts: 5 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package August 09, 2015 04:03AM |
Admin Registered: 13 years ago Posts: 19,010 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package August 09, 2015 04:10AM |
Registered: 9 years ago Posts: 5 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package August 09, 2015 04:43AM |
Admin Registered: 13 years ago Posts: 19,010 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package August 09, 2015 06:12AM |
Registered: 9 years ago Posts: 5 |