Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 02, 2016 03:46AM |
Admin Registered: 13 years ago Posts: 19,007 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 02, 2016 01:51PM |
Registered: 12 years ago Posts: 62 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 02, 2016 08:30PM |
Admin Registered: 13 years ago Posts: 19,007 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 03, 2016 01:40AM |
Registered: 9 years ago Posts: 40 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 03, 2016 09:19AM |
Registered: 12 years ago Posts: 62 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 04, 2016 03:29PM |
Registered: 12 years ago Posts: 62 |
root@seagate-dev:~# sensors-detect # sensors-detect revision 6209 (2014-01-14 22:51:58 +0100) # DMI data unavailable, please consider installing dmidecode 2.7 # or later for better results. This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): modprobe: ERROR: ../libkmod/libkmod.c:557 kmod_search_moddep() could not open moddep file '/lib/modules/3.18.27-val/modules.dep.bin' Failed to load module cpuid. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No AMD Family 16h power sensors... No Intel digital thermal sensor... No Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): Sorry, no supported PCI bus adapters found. modprobe: ERROR: ../libkmod/libkmod.c:557 kmod_search_moddep() could not open moddep file '/lib/modules/3.18.27-val/modules.dep.bin' Failed to load module i2c-dev. Next adapter: CNS3xxx I2C 0 (i2c-0) Do you want to scan it? (YES/no/selectively): Can't open /dev/i2c-0 Sorry, no sensors were detected. Either your system has no sensors, or they are not supported, or they are connected to an I2C or SMBus adapter that is not supported. If you find out what chips are on your board, check http://www.lm-sensors.org/wiki/Devices for driver status.
[ 0.000000] Booting Linux on physical CPU 0x900 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.18.27-val (root@debian-crosscompil) (gcc version 4.9.2 ( 4.9.2-10) ) #7 SMP Thu Mar 3 21:58:51 CET 2016 [ 0.000000] CPU: ARMv6-compatible processor [410fb024] revision 4 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Seagate CNS3420 NAS [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] free_area_init_node: node 0, pgdat c0614c80, node_mem_map cfdf6000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 [ 0.000000] PERCPU: Embedded 9 pages/cpu @cfde2000 s6208 r8192 d22464 u36864 [ 0.000000] pcpu-alloc: s6208 r8192 d22464 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,38400 mem=256M root=/dev/sda2 rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 253456K/262144K available (4591K kernel code, 183K rwdata, 1220K rodata, 204K init, 111K bss, 8688K reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc05b4f7c (5812 kB) .init : 0xc05b5000 - 0xc05e8000 ( 204 kB) .data : 0xc05e8000 - 0xc0615fc0 ( 184 kB) .bss : 0xc0615fc0 - 0xc0631bf4 ( 112 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836480000000ns [ 0.000000] Console: colour dummy device 80x30 [ 0.200000] console [ttyS0] enabled [ 0.210000] Calibrating delay loop... 277.70 BogoMIPS (lpj=1388544) [ 0.290000] pid_max: default: 32768 minimum: 301 [ 0.300000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.310000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.320000] Initializing cgroup subsys devices [ 0.330000] Initializing cgroup subsys net_cls [ 0.340000] Initializing cgroup subsys blkio [ 0.350000] CPU: Testing write buffer coherency: ok [ 0.360000] Setting up static identity map for 0x481e90 - 0x481ec8 [ 0.380000] CPU1: Booted secondary processor [ 0.460000] Brought up 2 CPUs [ 0.460000] SMP: Total of 2 processors activated (555.41 BogoMIPS). [ 0.470000] devtmpfs: initialized [ 0.490000] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 4 [ 0.510000] NET: Registered protocol family 16 [ 0.520000] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.530000] L2C: DT/platform modifies aux control register: 0x02040000 -> 0x02540000 [ 0.540000] L2C-310 cache controller enabled, 8 ways, 256 kB [ 0.550000] L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x06540000 [ 0.570000] vgaarb: loaded [ 0.580000] SCSI subsystem initialized [ 0.590000] libata version 3.00 loaded. [ 0.590000] usbcore: registered new interface driver usbfs [ 0.610000] usbcore: registered new interface driver hub [ 0.620000] usbcore: registered new device driver usb [ 0.640000] Switched to clocksource freerun [ 0.650000] Clockevents: could not switch to one-shot mode: dummy_timer is not functional. [ 0.650000] Could not switch to high resolution mode on CPU 0 [ 0.650000] Clockevents: could not switch to one-shot mode: dummy_timer is not functional. [ 0.650000] Could not switch to high resolution mode on CPU 1 [ 0.740000] FS-Cache: Loaded [ 0.760000] NET: Registered protocol family 2 [ 0.770000] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.790000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) [ 0.810000] TCP: Hash tables configured (established 2048 bind 2048) [ 0.830000] TCP: reno registered [ 0.840000] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.860000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.880000] NET: Registered protocol family 1 [ 0.890000] PCI: CLS 0 bytes, default 32 [ 0.890000] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.910000] SGI XFS with security attributes, no debug enabled [ 0.920000] msgmni has been set to 495 [ 0.930000] io scheduler noop registered [ 0.940000] io scheduler deadline registered (default) [ 0.960000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.980000] serial8250: ttyS0 at MMIO 0x78000000 (irq = 45, base_baud = 1500000) is a 16550A [ 1.010000] brd: module loaded [ 1.030000] loop: module loaded [ 1.040000] mGine mflash driver, (c) 2008 mGine Co. [ 1.050000] ahci ahci.0: forcing PORTS_IMPL to 0x3 [ 1.070000] ahci ahci.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode [ 1.090000] ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc [ 1.120000] scsi host0: ahci_platform [ 1.130000] scsi host1: ahci_platform [ 1.140000] ata1: SATA max UDMA/133 mmio [mem 0x83000000-0x83ffffff] port 0x100 irq 65 [ 1.160000] ata2: SATA max UDMA/133 mmio [mem 0x83000000-0x83ffffff] port 0x180 irq 65 [ 1.190000] physmap platform flash device: 08000000 at 10000000 [ 1.210000] physmap-flash physmap-flash.0: map_probe failed [ 1.240000] libphy: Fixed MDIO Bus: probed [ 1.250000] libphy: CNS3xxx MII Bus: probed [ 1.270000] eth0: RGMII PHY 0 on cns3xxx Switch [ 1.280000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.300000] ehci-pci: EHCI PCI platform driver [ 1.320000] ehci-platform: EHCI generic platform driver [ 1.330000] ehci-platform ehci-platform.0: EHCI Host Controller [ 1.350000] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1 [ 1.380000] ehci-platform ehci-platform.0: irq 64, io mem 0x82000000 [ 1.410000] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00 [ 1.430000] hub 1-0:1.0: USB hub found [ 1.440000] hub 1-0:1.0: 1 port detected [ 1.450000] usbcore: registered new interface driver usb-storage [ 1.470000] mousedev: PS/2 mouse device common for all mice [ 1.490000] adt7475 0-002e: ADT7473 device, revision 0 [ 1.500000] adt7475 0-002e: Optional features: fan4 pwm2 [ 1.510000] usbcore: registered new interface driver usbhid [ 1.520000] usbhid: USB HID core driver [ 1.530000] TCP: cubic registered [ 1.540000] Initializing XFRM netlink socket [ 1.540000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.540000] ata2: SATA link down (SStatus 0 SControl 300) [ 1.570000] NET: Registered protocol family 10 [ 1.580000] sit: IPv6 over IPv4 tunneling driver [ 1.590000] NET: Registered protocol family 17 [ 1.600000] NET: Registered protocol family 15 [ 1.610000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.620000] 8021q: 802.1Q VLAN Support v1.8 [ 1.640000] PCIe: Port[0] Enable PCIe LTSSM [ 1.650000] PCIe: Port[0] Check data link layer... [ 1.690000] ata1.00: ATA-8: ST500LM021-1KJ152, 0004SDM1, max UDMA/133 [ 1.710000] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.040000] ata1.00: configured for UDMA/133 [ 2.050000] scsi 0:0:0:0: Direct-Access ATA ST500LM021-1KJ15 SDM1 PQ: 0 ANSI: 5 [ 2.080000] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.100000] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.120000] sd 0:0:0:0: [sda] Write Protect is off [ 2.130000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.130000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.170000] Device not found. [ 2.170000] PCIe: Port[1] Enable PCIe LTSSM [ 2.180000] PCIe: Port[1] Check data link layer... [ 2.180000] sda: sda1 sda2 [ 2.180000] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.720000] Device not found. [ 3.000000] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 3.020000] VFS: Mounted root (ext4 filesystem) on device 8:2. [ 3.070000] devtmpfs: mounted [ 3.080000] Freeing unused kernel memory: 204K (c05b5000 - c05e8000) [ 3.520000] random: systemd urandom read with 33 bits of entropy available [ 3.600000] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 3.640000] systemd[1]: Detected architecture 'arm'. [ 3.750000] systemd[1]: Set hostname to <seagate-dev>. [ 4.230000] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. [ 4.240000] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 4.250000] systemd[1]: Expecting device dev-ttyS0.device... [ 4.290000] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 4.300000] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.310000] systemd[1]: Starting Remote File Systems (Pre). [ 4.350000] systemd[1]: Reached target Remote File Systems (Pre). [ 4.360000] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.370000] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 4.380000] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 4.390000] systemd[1]: Starting Paths. [ 4.430000] systemd[1]: Reached target Paths. [ 4.440000] systemd[1]: Starting Encrypted Volumes. [ 4.490000] systemd[1]: Reached target Encrypted Volumes. [ 4.500000] systemd[1]: Starting Swap. [ 4.540000] systemd[1]: Reached target Swap. [ 4.550000] systemd[1]: Starting Root Slice. [ 4.590000] systemd[1]: Created slice Root Slice. [ 4.600000] systemd[1]: Starting User and Session Slice. [ 4.640000] systemd[1]: Created slice User and Session Slice. [ 4.650000] systemd[1]: Starting Delayed Shutdown Socket. [ 4.690000] systemd[1]: Listening on Delayed Shutdown Socket. [ 4.700000] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 4.750000] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.760000] systemd[1]: Starting Journal Socket (/dev/log). [ 4.810000] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.820000] systemd[1]: Starting udev Control Socket. [ 4.860000] systemd[1]: Listening on udev Control Socket. [ 4.870000] systemd[1]: Starting udev Kernel Socket. [ 4.910000] systemd[1]: Listening on udev Kernel Socket. [ 4.920000] systemd[1]: Starting Journal Socket. [ 4.950000] systemd[1]: Listening on Journal Socket. [ 4.960000] systemd[1]: Starting System Slice. [ 5.000000] systemd[1]: Created slice System Slice. [ 5.010000] systemd[1]: Starting system-getty.slice. [ 5.060000] systemd[1]: Created slice system-getty.slice. [ 5.070000] systemd[1]: Starting system-serial\x2dgetty.slice. [ 5.110000] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 5.120000] systemd[1]: Starting Increase datagram queue length... [ 5.170000] systemd[1]: Starting Load Kernel Modules... [ 5.210000] systemd[1]: Starting udev Coldplug all Devices... [ 5.250000] systemd[1]: Mounting POSIX Message Queue File System... [ 5.290000] systemd[1]: Mounting Debug File System... [ 5.330000] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 5.340000] systemd[1]: Starting Create Static Device Nodes in /dev... [ 5.380000] systemd[1]: Started Set Up Additional Binary Formats. [ 5.390000] systemd[1]: Mounted Huge Pages File System. [ 5.410000] systemd[1]: Starting Slices. [ 5.650000] systemd[1]: Reached target Slices. [ 5.660000] systemd[1]: Started Remount Root and Kernel File Systems. [ 5.670000] systemd[1]: Started Various fixups to make systemd work better on Debian. [ 5.680000] systemd[1]: Starting Load/Save Random Seed... [ 5.950000] systemd[1]: Mounted Debug File System. [ 5.990000] systemd[1]: Mounted POSIX Message Queue File System. [ 6.040000] systemd[1]: Started Increase datagram queue length. [ 6.160000] systemd[1]: Started Load Kernel Modules. [ 6.420000] systemd[1]: Started Create Static Device Nodes in /dev. [ 6.680000] systemd[1]: Started Load/Save Random Seed. [ 6.930000] systemd[1]: Started udev Coldplug all Devices. [ 7.160000] systemd[1]: Starting udev Kernel Device Manager... [ 7.200000] systemd[1]: Starting Local File Systems (Pre). [ 7.240000] systemd[1]: Reached target Local File Systems (Pre). [ 7.250000] systemd[1]: Starting Local File Systems. [ 7.270000] systemd-udevd[825]: starting version 215 [ 7.320000] systemd[1]: Reached target Local File Systems. [ 7.330000] systemd[1]: Starting Remote File Systems. [ 7.590000] systemd[1]: Reached target Remote File Systems. [ 7.620000] systemd[1]: Starting Create Volatile Files and Directories... [ 7.710000] systemd[1]: Starting LSB: Raise network interfaces.... [ 7.770000] systemd[1]: Starting Apply Kernel Variables... [ 7.860000] systemd[1]: Mounted Configuration File System. [ 7.870000] systemd[1]: Mounted FUSE Control File System. [ 7.880000] systemd[1]: Starting Syslog Socket. [ 8.120000] systemd[1]: Listening on Syslog Socket. [ 8.130000] systemd[1]: Starting Sockets. [ 8.170000] systemd[1]: Reached target Sockets. [ 8.180000] systemd[1]: Starting Journal Service... [ 8.450000] systemd[1]: Started Journal Service. [ 9.530000] systemd-journald[876]: Received request to flush runtime journal from PID 1 [ 9.790000] random: nonblocking pool is initialized
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 14, 2016 01:47PM |
Registered: 9 years ago Posts: 40 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 14, 2016 04:48PM |
Registered: 12 years ago Posts: 62 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package April 24, 2016 05:47PM |
Registered: 9 years ago Posts: 22 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package September 16, 2017 09:15PM |
Registered: 9 years ago Posts: 15 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package September 17, 2017 06:01PM |
Registered: 10 years ago Posts: 46 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package February 11, 2018 06:14AM |
Registered: 10 years ago Posts: 46 |
kernel/kernel/configs.ko kernel/mm/zsmalloc.ko kernel/fs/binfmt_script.ko kernel/fs/mbcache.ko kernel/fs/autofs4/autofs4.ko kernel/fs/exportfs/exportfs.ko kernel/fs/ext2/ext2.ko kernel/fs/ext4/ext4.ko kernel/fs/fscache/fscache.ko kernel/fs/jbd2/jbd2.ko kernel/fs/nls/nls_base.ko kernel/crypto/crypto.ko kernel/crypto/crypto_wq.ko kernel/crypto/crypto_algapi.ko kernel/crypto/aead.ko kernel/crypto/crypto_blkcipher.ko kernel/crypto/chainiv.ko kernel/crypto/eseqiv.ko kernel/crypto/crypto_hash.ko kernel/crypto/pcompress.ko kernel/crypto/akcipher.ko kernel/crypto/cryptomgr.ko kernel/crypto/crypto_null.ko kernel/crypto/aes_generic.ko kernel/crypto/crc32c_generic.ko kernel/crypto/rng.ko kernel/block/deadline-iosched.ko kernel/drivers/ata/libata.ko kernel/drivers/ata/ahci_platform.ko kernel/drivers/ata/libahci.ko kernel/drivers/ata/libahci_platform.ko kernel/drivers/base/firmware_class.ko kernel/drivers/base/regmap/regmap-mmio.ko kernel/drivers/block/loop.ko kernel/drivers/block/mg_disk.ko kernel/drivers/block/zram/zram.ko kernel/drivers/dma/dmatest.ko kernel/drivers/gpio/gpio-generic.ko kernel/drivers/hid/hid.ko kernel/drivers/hid/hid-generic.ko kernel/drivers/hid/usbhid/usbhid.ko kernel/drivers/hwmon/hwmon.ko kernel/drivers/hwmon/hwmon-vid.ko kernel/drivers/hwmon/adt7475.ko kernel/drivers/i2c/i2c-core.ko kernel/drivers/i2c/i2c-dev.ko kernel/drivers/i2c/busses/i2c-cns3xxx.ko kernel/drivers/input/input-core.ko kernel/drivers/input/mousedev.ko kernel/drivers/mtd/mtd.ko kernel/drivers/mtd/ofpart.ko kernel/drivers/mtd/cmdlinepart.ko kernel/drivers/mtd/mtd_blkdevs.ko kernel/drivers/mtd/mtdblock.ko kernel/drivers/mtd/chips/chipreg.ko kernel/drivers/mtd/chips/cfi_probe.ko kernel/drivers/mtd/chips/cfi_util.ko kernel/drivers/mtd/chips/cfi_cmdset_0002.ko kernel/drivers/mtd/chips/gen_probe.ko kernel/drivers/mtd/maps/physmap.ko kernel/drivers/net/ethernet/cavium/cns3xxx_eth.ko kernel/drivers/net/phy/libphy.ko kernel/drivers/net/phy/realtek.ko kernel/drivers/net/phy/fixed_phy.ko kernel/drivers/net/phy/mdio-bcm-unimac.ko kernel/drivers/net/team/team.ko kernel/drivers/of/of_mdio.ko kernel/drivers/of/of_pci.ko kernel/drivers/of/of_pci_irq.ko kernel/drivers/scsi/scsi_mod.ko kernel/drivers/scsi/sd_mod.ko kernel/drivers/spi/spi-bitbang.ko kernel/drivers/spi/spi-cns3xxx.ko kernel/drivers/spi/spi-gpio.ko kernel/drivers/tty/serial/serial_core.ko kernel/drivers/tty/serial/8250/8250.ko kernel/drivers/tty/serial/8250/8250_base.ko kernel/drivers/tty/serial/8250/8250_pci.ko kernel/drivers/usb/common/usb-common.ko kernel/drivers/usb/core/usbcore.ko kernel/drivers/usb/storage/usb-storage.ko kernel/net/802/p8022.ko kernel/net/802/psnap.ko kernel/net/802/stp.ko kernel/net/bridge/bridge.ko kernel/net/ipv4/xfrm4_mode_beet.ko kernel/net/ipv4/inet_lro.ko kernel/net/ipv4/xfrm4_mode_transport.ko kernel/net/ipv4/xfrm4_mode_tunnel.ko kernel/net/ipv4/inet_diag.ko kernel/net/ipv4/tcp_diag.ko kernel/net/ipv4/tcp_cubic.ko kernel/net/key/af_key.ko kernel/net/llc/llc.ko kernel/net/packet/af_packet.ko kernel/net/packet/af_packet_diag.ko kernel/net/unix/unix.ko kernel/net/unix/unix_diag.ko kernel/net/xfrm/xfrm_algo.ko kernel/net/xfrm/xfrm_user.ko kernel/lib/bitrev.ko kernel/lib/crc-ccitt.ko kernel/lib/crc16.ko kernel/lib/crc32.ko kernel/lib/libcrc32c.ko kernel/lib/lz4/lz4_compress.ko kernel/lib/lz4/lz4_decompress.ko kernel/lib/lzo/lzo_compress.ko kernel/lib/lzo/lzo_decompress.ko kernel/lib/xz/xz_dec.ko kernel/lib/zlib_inflate/zlib_inflate.kodmesg:
[ 0.000000] Booting Linux on physical CPU 0x900 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.88-eric (root@seagate-dev) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #11 SMP Sun Feb 11 11:54:13 UTC 2018 [ 0.000000] CPU: ARMv6-compatible processor [410fb024] revision 4 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Seagate CNS3420 NAS [ 0.000000] Ignoring tag cmdline (using the default kernel command line) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] free_area_init_node: node 0, pgdat c0563e40, node_mem_map cfdf5000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 [ 0.000000] PERCPU: Embedded 11 pages/cpu @cfddd000 s16140 r8192 d20724 u45056 [ 0.000000] pcpu-alloc: s16140 r8192 d20724 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: root=/dev/sda3 rw init=/sbin/init mem=256M console=ttyS0,38400 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 254152K/262144K available (3959K kernel code, 149K rwdata, 1180K rodata, 204K init, 101K bss, 7992K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc050cfb4 (5140 kB) .init : 0xc050d000 - 0xc0540000 ( 204 kB) .data : 0xc0540000 - 0xc0565648 ( 150 kB) .bss : 0xc0565648 - 0xc057ea68 ( 102 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: freerun: mask: 0xffffffffffff max_cycles: 0x179dd7f66, max_idle_ns: 28210892933900 ns [ 0.000000] smp_twd: clock not found -2 [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns [ 0.000000] Console: colour dummy device 80x30 [ 0.210000] console [ttyS0] enabled [ 0.210000] Calibrating local timer... 347.99MHz. [ 0.280000] Calibrating delay loop... 277.70 BogoMIPS (lpj=1388544) [ 0.350000] pid_max: default: 32768 minimum: 301 [ 0.360000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.370000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.380000] Initializing cgroup subsys io [ 0.390000] Initializing cgroup subsys devices [ 0.400000] Initializing cgroup subsys net_cls [ 0.400000] CPU: Testing write buffer coherency: ok [ 0.420000] Setting up static identity map for 0x82a0 - 0x82d8 [ 0.500000] Brought up 2 CPUs [ 0.500000] SMP: Total of 2 processors activated (555.41 BogoMIPS). [ 0.510000] devtmpfs: initialized [ 0.520000] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 4 [ 0.530000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.540000] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.550000] NET: Registered protocol family 16 [ 0.560000] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.580000] L2C: DT/platform modifies aux control register: 0x02040000 -> 0x02540000 [ 0.590000] L2C-310 cache controller enabled, 8 ways, 256 kB [ 0.600000] L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x06540000 [ 0.630000] vgaarb: loaded [ 0.630000] SCSI subsystem initialized [ 0.640000] libata version 3.00 loaded. [ 0.640000] usbcore: registered new interface driver usbfs [ 0.650000] usbcore: registered new interface driver hub [ 0.660000] usbcore: registered new device driver usb [ 0.680000] clocksource: Switched to clocksource freerun [ 0.690000] FS-Cache: Loaded [ 0.720000] NET: Registered protocol family 2 [ 0.730000] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.740000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) [ 0.760000] TCP: Hash tables configured (established 2048 bind 2048) [ 0.770000] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.790000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.800000] NET: Registered protocol family 1 [ 0.810000] PCI: CLS 0 bytes, default 32 [ 0.820000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.840000] io scheduler noop registered [ 0.840000] io scheduler deadline registered (default) [ 0.860000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.880000] serial8250: ttyS0 at MMIO 0x78000000 (irq = 45, base_baud = 1500000) is a 16550A [ 0.910000] loop: module loaded [ 0.910000] mGine mflash driver, (c) 2008 mGine Co. [ 0.930000] zram: Added device: zram0 [ 0.930000] ahci ahci.0: forcing PORTS_IMPL to 0x3 [ 0.940000] ahci ahci.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode [ 0.960000] ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc [ 0.990000] scsi host0: ahci [ 0.990000] scsi host1: ahci [ 1.000000] ata1: SATA max UDMA/133 mmio [mem 0x83000000-0x83ffffff] port 0x100 irq 65 [ 1.020000] ata2: SATA max UDMA/133 mmio [mem 0x83000000-0x83ffffff] port 0x180 irq 65 [ 1.040000] physmap platform flash device: 08000000 at 10000000 [ 1.050000] physmap-flash physmap-flash.0: map_probe failed [ 1.070000] libphy: Fixed MDIO Bus: probed [ 1.090000] libphy: CNS3xxx MII Bus: probed [ 1.100000] eth0: RGMII PHY 0 on cns3xxx Switch [ 1.110000] usbcore: registered new interface driver usb-storage [ 1.120000] mousedev: PS/2 mouse device common for all mice [ 1.140000] i2c /dev entries driver [ 1.140000] usbcore: registered new interface driver usbhid [ 1.160000] usbhid: USB HID core driver [ 1.160000] Initializing XFRM netlink socket [ 1.170000] NET: Registered protocol family 17 [ 1.180000] NET: Registered protocol family 15 [ 1.190000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.230000] PCIe: Port[0] Enable PCIe LTSSM [ 1.230000] PCIe: Port[0] Check data link layer... [ 1.390000] ata1: SATA link down (SStatus 0 SControl 300) [ 1.400000] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.460000] ata2.00: ATA-8: TOSHIBA MK3261GSY, MC000D, max UDMA/100 [ 1.480000] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.500000] ata2.00: configured for UDMA/100 [ 1.510000] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK3261GS 0D PQ: 0 ANSI: 5 [ 1.530000] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.550000] sd 1:0:0:0: [sda] Write Protect is off [ 1.560000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.560000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.620000] sda: sda1 sda2 sda3 [ 1.630000] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.750000] Device not found. [ 1.750000] PCIe: Port[1] Enable PCIe LTSSM [ 1.760000] PCIe: Port[1] Check data link layer... [ 2.280000] Device not found. [ 2.310000] EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities [ 2.490000] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 2.510000] VFS: Mounted root (ext4 filesystem) on device 8:3. [ 2.550000] devtmpfs: mounted [ 2.560000] Freeing unused kernel memory: 204K [ 3.290000] systemd[1]: System time before build time, advancing clock. [ 3.420000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.520000] random: systemd: uninitialized urandom read (16 bytes read, 47 bits of entropy available) [ 3.580000] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 3.630000] systemd[1]: Detected architecture arm. [ 3.710000] systemd[1]: Set hostname to <seagate-dev>. [ 3.860000] random: systemd: uninitialized urandom read (16 bytes read, 58 bits of entropy available) [ 3.970000] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 60 bits of entropy available) [ 4.000000] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 60 bits of entropy available) [ 4.000000] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 60 bits of entropy available) [ 4.000000] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 60 bits of entropy available) [ 4.370000] random: systemd: uninitialized urandom read (16 bytes read, 70 bits of entropy available) [ 4.400000] random: systemd: uninitialized urandom read (16 bytes read, 70 bits of entropy available) [ 4.420000] random: systemd: uninitialized urandom read (16 bytes read, 70 bits of entropy available) [ 4.440000] random: systemd: uninitialized urandom read (16 bytes read, 70 bits of entropy available) [ 5.010000] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.110000] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.160000] systemd[1]: Reached target Remote File Systems. [ 5.200000] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.250000] systemd[1]: Listening on Journal Socket. [ 5.290000] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.340000] systemd[1]: Created slice User and Session Slice. [ 5.380000] systemd[1]: Listening on Network Service Netlink Socket. [ 5.430000] systemd[1]: Listening on Syslog Socket. [ 5.470000] systemd[1]: Reached target Swap. [ 5.500000] systemd[1]: Created slice System Slice. [ 5.570000] systemd[1]: Starting Journal Service... [ 5.600000] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.760000] systemd[1]: Starting Load Kernel Modules... [ 5.800000] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.850000] systemd[1]: dev-hugepages.mount: Couldn't determine result for ConditionVirtualization=!private-users, assuming failed: No such file or directory [ 5.930000] systemd[1]: Mounting POSIX Message Queue File System... [ 5.980000] systemd[1]: Mounting Debug File System... [ 6.020000] systemd[1]: Created slice system-getty.slice. [ 6.060000] systemd[1]: Reached target Slices. [ 6.090000] systemd[1]: Listening on udev Control Socket. [ 6.160000] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 6.220000] systemd[1]: Listening on udev Kernel Socket. [ 6.260000] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 6.320000] systemd[1]: Reached target Paths. [ 6.350000] systemd[1]: Reached target Encrypted Volumes. [ 6.390000] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 6.470000] systemd[1]: Mounted POSIX Message Queue File System. [ 6.520000] systemd[1]: Mounted Debug File System. [ 6.550000] systemd[1]: Started Journal Service. [ 7.080000] systemd-journald[449]: Received request to flush runtime journal from PID 1 [ 7.630000] random: nonblocking pool is initialized [ 7.730000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.770000] ehci-platform: EHCI generic platform driver [ 7.780000] ehci-platform ehci-platform.0: EHCI Host Controller [ 7.800000] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1 [ 7.820000] ehci-platform ehci-platform.0: irq 64, io mem 0x82000000 [ 7.870000] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00 [ 7.910000] hub 1-0:1.0: USB hub found [ 7.920000] hub 1-0:1.0: 1 port detected [ 7.950000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.990000] ohci-platform: OHCI generic platform driver [ 8.000000] ohci-platform ohci-platform.0: Generic Platform OHCI controller [ 8.020000] ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 2 [ 8.040000] ohci-platform ohci-platform.0: irq 91, io mem 0x88000000 [ 8.120000] hub 2-0:1.0: USB hub found [ 8.120000] hub 2-0:1.0: 1 port detected [ 21.220000] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 25.300000] eth0: link up, speed 1000 Mb/s, full duplex
tommy79
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package February 11, 2018 11:11AM |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package February 11, 2018 04:16PM |
Registered: 10 years ago Posts: 46 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package February 12, 2018 01:16AM |
Admin Registered: 13 years ago Posts: 19,007 |
[ 6.417771] i2c /dev entries driverBut the i2c device is working fine
drwxr-xr-x 2 root root 0 Feb 11 22:57 /sys/class/i2c-adapter drwxr-xr-x 2 root root 0 Feb 11 22:57 /sys/class/i2c-dev
Linux tldDebian 4.15.2-kirkwood-tld-1 #1 PREEMPT Fri Feb 9 01:52:00 PST 2018 armv5tel GNU/Linux
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package February 12, 2018 12:35PM |
Registered: 10 years ago Posts: 46 |
cat .config| grep CONFIG_I2C_MUX CONFIG_I2C_MUX=y CONFIG_I2C_MUX_GPIO=y CONFIG_I2C_MUX_PCA9541=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_REG=y
tommy79
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package February 12, 2018 04:01PM |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package February 13, 2018 12:30AM |
Admin Registered: 13 years ago Posts: 19,007 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package February 26, 2018 02:38PM |
Registered: 10 years ago Posts: 46 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package February 27, 2018 02:05AM |
Admin Registered: 13 years ago Posts: 19,007 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 04, 2018 10:46AM |
Registered: 6 years ago Posts: 42 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 04, 2018 02:22PM |
Registered: 10 years ago Posts: 46 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 04, 2018 04:22PM |
Admin Registered: 13 years ago Posts: 19,007 |
/dts-v1/; #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include "skeleton.dtsi" / { model = "Cavium CNS3420 validation board"; compatible = "cavium,cns3420"; interrupt-parent = <&gic>; chosen { }; aliases { serial0 = &serial; }; memory { /* 256MB at address 0 */ reg = <0x00000000 0x10000000>; }; cpus { #address-cells = <1>; #size-cells = <0>; enable-method = "cavium,cns3420-smp"; cpu@0 { device_type = "cpu"; compatible = "arm,arm11mpcore"; reg = <0>; next-level-cache = <&L2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,arm11mpcore"; reg = <1>; next-level-cache = <&L2>; }; }; /* Primary TestChip GIC synthesized with the CPU */ gic: interrupt-controller@1f000100 { compatible = "arm,arm11mp-gic"; #interrupt-cells = <3>; #address-cells = <1>; interrupt-controller; reg = <0x90001000 0x1000>, <0x90000100 0x100>; }; L2: l2-cache { compatible = "arm,l220-cache"; reg = <0x92002000 0x1000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; cache-unified; cache-level = <2>; /* all of the below are probably wrong and have to be fixed before we can use l2x0_of_init */ cache-size = <1048576>; // 1MB cache-sets = <4096>; cache-line-size = <32>; arm,shared-override; arm,parity-enable; arm,outer-sync-disable; }; scu@1f000000 { compatible = "arm,arm11mp-scu"; reg = <0x90000000 0x100>; }; flash@10000000 { /* 128MiB NOR Flash memory */ compatible = "cfi-flash"; reg = <0x10000000 0x08000000>; bank-width = <2>; partition@00000000 { label = "uboot"; reg = <0 0x00040000>; }; partition@00040000 { label = "kernel"; reg = <0x00040000 0x004c0000>; }; partition@00500000 { label = "filesystem"; reg = <0x00500000 0x07000000>; }; partition@07500000 { label = "filesystem2"; reg = <0x07500000 0x00ae0000>; }; partition@07fe0000 { label = "ubootenv"; reg = <0x07fe0000 0x00020000>; }; }; soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; ranges; serial0: serial@78000000 { compatible = "ns16550a"; reg = <0x78000000 0x1000>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; regshift = <2>; clocks = <&uartclk>; }; }; };
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 04, 2018 05:05PM |
Admin Registered: 13 years ago Posts: 19,007 |
root@tldDebian:/usr/src/builds-4.4-cns3xxx# lst -h total 99M -rw-r--r-- 1 root root 84M Feb 25 2016 linux-4.4.3.tar.xz -rw-r--r-- 1 root root 131K Feb 28 2016 wget-log drwxr-xr-x 4 root root 4.0K Feb 28 2016 cns3xx_patch -rw-r--r-- 1 root root 66K Feb 29 2016 config-4.4.3-cns3xxx-tld-1 -rwxr-xr-x 1 root root 3.1M Feb 29 2016 zImage-4.4.3-cns3xxx-tld-1 -rw-r--r-- 1 root root 4.8M Feb 29 2016 linux-image-4.4.3-cns3xxx-tld-1_1.0_armel.deb -rw-r--r-- 1 root root 7.0M Feb 29 2016 linux-headers-4.4.3-cns3xxx-tld-1_1.0_armel.deb -rw-r--r-- 1 root root 145K Feb 29 2016 linux-4.4.3-cns3xxx-tld-1.patch
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 04, 2018 06:51PM |
Registered: 6 years ago Posts: 42 |
U-Boot 2008.10-mpcore (Nov 11 2012 - 15:04:27) Whitney model:(ELCAPITAN) release v1.2-beta2 CPU: Cavium Networks CNS3000 ID Code: 410fb024 (Part number: 0xB02, Revision number: 4) CPU ID: 900 Chip Version: c DRAM: 512 MB Parallel Flash: 0 kB Flash Manufacturer: MX Serial Flash: 512 kB Serial Flash: Bank # 1: Nb pages: 2048 Page Size: 256 Size: 524288 bytes, Logical address: 0x60000000 Area 0: 60000000 to 60FFFFFF SPI flash In: serial Out: serial Err: serial CPU works at 700 MHz (700/1/1) DDR2 Speed is 400 MHz Restoring RTC Hit any key to stop autoboot: 0 Whitney # setenv bootargs root=/dev/sda1 init=/bin/sh mem=256M console=ttyS0,38400; setenv arcNumber 2776 Whitney # tftpboot 0x800000 disks/seagate/uImage-3.18.5 Initialize PHY s/w auto-polling phy_id: 1c Initialize RTL8211 phy_id: 1c Initialize RTL8211 TFTP from server 192.168.3.140; our IP address is 192.168.3.17 Filename 'disks/seagate/uImage-3.18.5'. Load address: 0x800000 Loading: T T ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################### done Bytes transferred = 2173432 (2129f8 hex) Whitney # tftpboot 0x1100000 disks/seagate/uInitrd-3.18.5 TFTP from server 192.168.3.140; our IP address is 192.168.3.17 Filename 'disks/seagate/uInitrd-3.18.5'. Load address: 0x1100000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################## done Bytes transferred = 6535284 (63b874 hex) Whitney # tftpboot 0x1c00000 disks/seagate/armada-370-seagate-nas-4bay.dtb TFTP from server 192.168.3.140; our IP address is 192.168.3.17 Filename 'disks/seagate/armada-370-seagate-nas-4bay.dtb'. Load address: 0x1c00000 Loading: #### done Bytes transferred = 15814 (3dc6 hex) Whitney # tftpboot 0x1c00000 disks/seagate/kirkwood.dtb TFTP from server 192.168.3.140; our IP address is 192.168.3.17 Filename 'disks/seagate/kirkwood.dtb'. Load address: 0x1c00000 Loading: ### done Bytes transferred = 10434 (28c2 hex) Whitney # bootm 0x800000 0x1100000 0x1c00000 enter do_eth_down!!! ## Booting kernel from Legacy Image at 00800000 ... Image Name: linux Created: 2018-03-04 2:31:24 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2173368 Bytes = 2.1 MB Load Address: 02000000 Entry Point: 02000000 ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-3.18.5-kirkwood-tld-1 Created: 2015-02-19 1:49:36 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 6535220 Bytes = 6.2 MB Load Address: 00000000 Entry Point: 00000000 Loading Kernel Image ... OK OK Starting kernel ... Booting Linux on physical CPU 0x900 Linux version 3.18.5-cns3xxx-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT We5 CPU: ARMv6-compatible processor [410fb024] revision 4 (ARMv7), cr=00c5787d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: Cavium Networks CNS3420 Validation Board Memory policy: Data cache writealloc PERCPU: Embedded 9 pages/cpu @cfdeb000 s5888 r8192 d22784 u36864 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 Kernel command line: root=/dev/sda1 init=/bin/sh mem=256M console=ttyS0,38400 PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 249120K/262144K available (2979K kernel code, 125K rwdata, 952K rodata, 164K init, 78K bss, 13024K r) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc03def84 (3932 kB) .init : 0xc03df000 - 0xc0408000 ( 164 kB) .data : 0xc0408000 - 0xc04274a0 ( 126 kB) .bss : 0xc04274a0 - 0xc043aea0 ( 79 kB) Preemptible hierarchical RCU implementation. Additional per-CPU info printed with stalls. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 NR_IRQS:16 nr_irqs:16 16 sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836480000000ns Console: colour dummy device 80x30 console [ttyS0] enabled Calibrating delay loop... 277.70 BogoMIPS (lpj=1388544) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok missing device node for CPU 0 CPU0: thread -1, cpu 0, socket -1, mpidr 900 Setting up static identity map for 0x2ee7e0 - 0x2ee82c Brought up 1 CPUs SMP: Total of 1 processors activated (277.70 BogoMIPS). CPU: All CPU(s) started in SVC mode. NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations L2C: DT/platform modifies aux control register: 0x02040000 -> 0x02540000 L2C-310 cache controller enabled, 8 ways, 256 kB L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x06540000 vgaarb: loaded SCSI subsystem initialized Switched to clocksource freerun FS-Cache: Loaded Trying to unpack rootfs image as initramfs... Freeing initrd memory: 6384K (c1100000 - c173c000) futex hash table entries: 256 (order: 2, 16384 bytes) msgmni has been set to 499 io scheduler noop registered io scheduler deadline registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x78000000 (irq = 45, base_baud = 1500000) is a 16550A brd: module loaded loop: module loaded mGine mflash driver, (c) 2008 mGine Co. physmap platform flash device: 08000000 at 10000000 physmap-flash physmap-flash.0: map_probe failed mousedev: PS/2 mouse device common for all mice I2O subsystem v1.325 i2o: max drivers = 8 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper PCIe: Port[0] Enable PCIe LTSSM PCIe: Port[0] Check data link layer... Device not found. PCIe: Port[1] Enable PCIe LTSSM PCIe: Port[1] Check data link layer... Device not found. Registering SWP/SWPB emulation handler Freeing unused kernel memory: 164K (c03df000 - c0408000) Loading, please wait... mount: mounting udev on /dev failed: No such device W: devtmpfs not available, falling back to tmpfs for /dev error getting socket: Address family not supported by protocol error initializing udev control socketerror initializing udev control socket Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. error getting socket: Address family not supported by protocol Begin: Waiting for root file system ... done. Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) chvt: can't open console ALERT! /dev/sda1 does not exist. Dropping to a shell! modprobe: can't change directory to '3.18.5-cns3xxx-tld-1': No such file or directory modprobe: can't change directory to '3.18.5-cns3xxx-tld-1': No such file or directory modprobe: can't change directory to '3.18.5-cns3xxx-tld-1': No such file or directory modprobe: can't change directory to '3.18.5-cns3xxx-tld-1': No such file or directory modprobe: can't change directory to '3.18.5-cns3xxx-tld-1': No such file or directory modprobe: can't change directory to '3.18.5-cns3xxx-tld-1': No such file or directory modprobe: can't change directory to '3.18.5-cns3xxx-tld-1': No such file or directory modprobe: can't change directory to '3.18.5-cns3xxx-tld-1': No such file or directory BusyBox v1.22.1 (Debian 1:1.22.0-9+b1) built-in shell (ash) Enter 'help' for a list of built-in commands. /bin/sh: can't access tty; job control turned off (initramfs)
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 05, 2018 12:03AM |
Admin Registered: 13 years ago Posts: 19,007 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 05, 2018 01:06AM |
Admin Registered: 13 years ago Posts: 19,007 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 05, 2018 07:49AM |
Registered: 6 years ago Posts: 42 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 05, 2018 01:57PM |
Registered: 10 years ago Posts: 46 |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 05, 2018 08:17PM |
Admin Registered: 13 years ago Posts: 19,007 |