tommy79
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 06, 2018 07:00AM |
Re: (WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package March 06, 2018 05:46PM |
Admin Registered: 13 years ago Posts: 19,007 |
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 12:20AM |
Admin Registered: 13 years ago Posts: 19,007 |
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 03:59PM |
Registered: 6 years ago Posts: 42 |
physmap platform flash device: 08000000 at 10000000 Unable to handle kernel paging request at virtual address b6e1f91d pgd = cf9d8000 [b6e1f91d] *pgd=0ec37831, *pte=0f0e318f, *ppte=0f0e3a2e Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 422 Comm: modprobe Not tainted 4.14.24-cns3xxxx-tld-1 #1 Hardware name: Cavium Networks CNS3420 Validation Board task: cfaf4ca0 task.stack: cfa66000 PC is at v6wbi_flush_user_tlb_range+0x28/0x48 LR is at change_protection_range+0x2a4/0x30c pc : [<c001ab30>] lr : [<c00c49bc>] psr: 20000013 sp : cfa67eb8 ip : 00000000 fp : cfa67f14 r10: cf9d8020 r9 : 00440000 r8 : 00000000 r7 : 00000001 r6 : 00440000 r5 : cec1d100 r4 : 0556a34f r3 : 00000001 r2 : 00100871 r1 : 00440000 r0 : 0043f001 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 00c5787d Table: 0f9d8008 DAC: 00000051 Process modprobe (pid: 422, stack limit = 0xcfa66188)
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 04:06PM |
Registered: 10 years ago Posts: 46 |
Whitney # scsi init;ext2load scsi 0 0x8000000 /zImage; bootm 0x8000000 Initialize SCSI AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part set feature error! scanning bus for devices... Supprt LBA48 addressing. timeout exit! Device 0: (1:0) Vendor: ATA Prod.: HGST HTS725050A7 Rev: GH2Z Type: Hard Disk Supports 48-bit addressing Capacity: 476940.0 MB = 465.7 GB (976773168 x 512) 3349200 bytes read enter do_eth_down!!! Wrong Image Format for bootm command ERROR: can't get kernel image!
mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux kernel" -d zImage-4.14.24-cns3xxxx-tld-1 uImageto uncompress the zImage, but it wont boot and stops with "Starting kernel ..."
## Booting kernel from Legacy Image at 08000000 ... Image Name: Linux kernel Created: 2018-03-07 21:52:04 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3349200 Bytes = 3.2 MB Load Address: 80008000 Entry Point: 80008000 Loading Kernel Image ... OK OK Starting kernel ...
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 04:20PM |
Registered: 10 years ago Posts: 46 |
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 04:42PM |
Admin Registered: 13 years ago Posts: 19,007 |
Whitney # bootm 0x2000000 0x5100000 0x5000000
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 04:44PM |
Registered: 10 years ago Posts: 46 |
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 04:46PM |
Registered: 6 years ago Posts: 42 |
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 04:50PM |
Admin Registered: 13 years ago Posts: 19,007 |
bdinfo usb reset ide reset printenv help
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 04:55PM |
Admin Registered: 13 years ago Posts: 19,007 |
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-4.15.2-kirkwood-tld-1 -d vmlinuz-4.15.2-kirkwood-tld-1 uImage mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-4.15.2-kirkwood-tld-1 -d initrd.img-4.15.2-kirkwood-tld-1 uInitrd
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 05:02PM |
Admin Registered: 13 years ago Posts: 19,007 |
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 05:06PM |
Registered: 6 years ago Posts: 42 |
U-Boot 2008.10-mpcore (Nov 11 2012 - 15:04:27) Whitney model:(ELCAPITAN) release v1.2-beta2 CPU: Cavium Networks CNS3000 ID Code: 410fb024 (Part number: 0xB02, Revision number: 4) CPU ID: 900 Chip Version: c DRAM: 512 MB Parallel Flash: 0 kB Flash Manufacturer: MX Serial Flash: 512 kB Serial Flash: Bank # 1: Nb pages: 2048 Page Size: 256 Size: 524288 bytes, Logical address: 0x60000000 Area 0: 60000000 to 60FFFFFF SPI flash In: serial Out: serial Err: serial CPU works at 700 MHz (700/1/1) DDR2 Speed is 400 MHz Restoring RTC Hit any key to stop autoboot: 0 Whitney # usb reset (Re)start USB... USB: scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found Whitney # ide reset Unknown command 'ide' - try 'help' Whitney # printenv bootargs=root=/dev/mtdblock0 mem=256M console=ttyS0 bootcmd= bootdelay=2 baudrate=38400 port=0 boardtest_state_memory=none model_name=whitney_4bay cpu_clock=700 mfgmodel=elcapitan netmask=255.255.0.0 bootfile="/tftpboot/uImage" tftp_bsize=512 udp_frag_size=512 whitney_state=saved opid=Z13100257 hddlocation=C hddpn=1CH164-515 ethaddr=00:10:75:37:B1:74 serialNo=NA6P0FXW ethaddr0=00:10:75:37:B1:74 ethaddr1=00:10:75:37:B1:75 modelname=1BX5P3-500 serial_number=5564T01001G411001E6J0A1 tftp_path=elcapitan/bootimage netboot_cmd=dhcp;setenv serverip ${tftp_serverip}; tftp 0x4000000 ${tftp_path}/bootpImage; go 0x4000000; fw_zone=normal create_volume=pass mfgtest_state=final_tested_ok raclient_securityKey=LLnE+YNzJnJkHzr4GNIJEw== raclient_leaseExpires=2014-12-13T06:47:57Z current_kernel=kernel2 autoload=yes tftp_serverip=192.168.3.140 serverip=192.168.3.140 ipaddr=192.168.3.17 rtclog=53225a5f num_boot_tries=2 stdin=serial stdout=serial stderr=serial verify=n Environment size: 962/65532 bytes Whitney # help ? - alias for 'help' base - print or set address offset bcm - read/write bcm53115m register bdinfo - print Board Info structure bootelf - Boot from an ELF image in memory bootm - boot application image from memory bootp - boot image via network using BOOTP/TFTP protocol bootvx - Boot vxWorks from an ELF image cmp - memory compare cp - memory copy crc32 - checksum calculation date - get/set/reset date & time dcache - enable or disable data cache dhcp - boot image via network using DHCP/TFTP protocol erase - erase FLASH memory via parallel interface erase_spi - erase FLASH memory via serial interface ext2load- load binary file from a Ext2 filesystem ext2ls - list files in a directory (default /) fatinfo - print information about filesystem fatload - load binary file from a dos filesystem fatls - list files in a directory (default /) flinfo - print FLASH memory information go - start application at address 'addr' help - print online help icache - enable or disable instruction cache iminfo - print header information for application image loadb - load binary file over serial line (kermit mode) loady - load binary file over serial line (ymodem mode) loop - infinite loop on address range md - memory display mdio - read/write PHY register memtest_cns3000 - cns3000 RAM test mm - memory modify (auto-incrementing) mmcinit - init mmc card mtest - simple RAM test mw - memory write (fill) nm - memory modify (constant address) ping - send ICMP ECHO_REQUEST to network host printenv- print environment variables protect - enable or disable parallel FLASH write protection protect_spi - enable or disable serial FLASH write protection rarpboot- boot image via network using RARP/TFTP protocol reset - Perform RESET of the CPU run - run commands in an environment variable saveenv - save environment variables to persistent storage scsi - SCSI sub-system scsiboot- boot from SCSI device setenv - set environment variables tftpboot- boot image via network using TFTP protocol usb - USB sub-system usbboot - boot from USB device version - print monitor version Whitney #
tommy79
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 05:43PM |
Whitney # scsi init Initialize SCSI AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part scanning bus for devices... Supprt LBA48 addressing. timeout exit! Device 0: (1:0) Vendor: ATA Prod.: WDC WD7500BPKT-0 Rev: 01.0 Type: Hard Disk Supports 48-bit addressing Capacity: 715404.8 MB = 698.6 GB (1465149168 x 512)
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 05:55PM |
Registered: 6 years ago Posts: 18 |
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 06:22PM |
Registered: 6 years ago Posts: 42 |
Whitney # scsi init Initialize SCSI AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part set feature error! scanning bus for devices... timeout exit! Whitney # scsi reset Reset SCSI scanning bus for devices... timeout exit! Whitney #
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 06:51PM |
Admin Registered: 13 years ago Posts: 19,007 |
mkimage -A arm -O linux -T kernel -C none -a ............. mkimage -A arm -O linux -T ramdisk -C gzip -a ............
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 07:05PM |
Registered: 6 years ago Posts: 42 |
mkimage -A arm -O linux -a 0x800000 -a 0x800000 -T kernel -C none -d vmlinuz-4.14.24-cns3xxxx-tld-1 -n linux uImage-4.14.24
tar xvjf ../Debian-3.18.5-kirkwood-tld-1-rootfs-bodhi.tar.bz2
rm -rf ./lib/modules/3.18* (switched back to above, untarred directory) cp -a 4.14.24-cns3xxxx-tld-1/ /mnt/root/usr/lib/modules
cd root && find . |cpio -o -H newc |gzip >../initrd-4.14.24.img; cd /mnt
mkimage -A arm -T ramdisk -C gzip -n uInitrd -d initrd-4.14.24.img uInitrd-4.14.24
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 07:08PM |
Admin Registered: 13 years ago Posts: 19,007 |
mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-4.15.2-kirkwood-tld-1 -d initrd.img-4.15.2-kirkwood-tld-1 uInitrd
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 07:13PM |
Registered: 6 years ago Posts: 42 |
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 07:23PM |
Admin Registered: 13 years ago Posts: 19,007 |
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 07:24PM |
Registered: 6 years ago Posts: 42 |
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 07:37PM |
Registered: 6 years ago Posts: 42 |
Whitney # scsi init Initialize SCSI AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part scanning bus for devices... Supprt LBA48 addressing. Device 0: (0:0) Vendor: ATA Prod.: WDC WD40EFRX-68N Rev: 82.0 Type: Hard Disk Supports 48-bit addressing Capacity: 3815447.8 MB = 3726.0 GB (7814037168 x 512) Supprt LBA48 addressing. Device 1: (1:0) Vendor: ATA Prod.: WDC WD40EFRX-68N Rev: 82.0 Type: Hard Disk Supports 48-bit addressing Capacity: 3815447.8 MB = 3726.0 GB (7814037168 x 512)
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 07:54PM |
Registered: 6 years ago Posts: 42 |
markt@savannah:/usr/local/src/seagate/doozan/Debian$ cp /usr/bin/qemu-arm-static usr/bin markt@savannah:/usr/local/src/seagate/doozan/Debian$ ls usr/bin/qemu-arm-static usr/bin/qemu-arm-static markt@savannah:/usr/local/src/seagate/doozan/Debian$ sudo mount -t proc /proc proc markt@savannah:/usr/local/src/seagate/doozan/Debian$ sudo mount -o bind /dev dev markt@savannah:/usr/local/src/seagate/doozan/Debian$ sudo mount -o bind /dev/pts dev/pts markt@savannah:/usr/local/src/seagate/doozan/Debian$ sudo mount -o bind /sys sys markt@savannah:/usr/local/src/seagate/doozan/Debian$ cd .. (you have to become root to do the chroot) markt@savannah:/usr/local/src/seagate/doozan$ sudo bash root@savannah:/usr/local/src/seagate/doozan# chroot Debian /bin/bash
root@savannah:/# uname -a Linux savannah 4.4.0-116-generic #140-Ubuntu SMP Mon Feb 12 21:23:04 UTC 2018 armv7l GNU/Linux root@savannah:/#
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 08:10PM |
Admin Registered: 13 years ago Posts: 19,007 |
> markt@savannah:/usr/local/src/seagate/doozan/Debian$ > cp /usr/bin/qemu-arm-static usr/bin > markt@savannah:/usr/local/src/seagate/doozan/Debian$ > ls usr/bin/qemu-arm-static > usr/bin/qemu-arm-static > markt@savannah:/usr/local/src/seagate/doozan/Debian$ > sudo mount -t proc /proc proc > markt@savannah:/usr/local/src/seagate/doozan/Debian$ > sudo mount -o bind /dev dev > markt@savannah:/usr/local/src/seagate/doozan/Debian$ > sudo mount -o bind /dev/pts dev/pts > markt@savannah:/usr/local/src/seagate/doozan/Debian$ > sudo mount -o bind /sys sys > markt@savannah:/usr/local/src/seagate/doozan/Debian$ > cd .. > (you have to become root to do the chroot) > markt@savannah:/usr/local/src/seagate/doozan$ sudo > bash > root@savannah:/usr/local/src/seagate/doozan# > chroot Debian /bin/bash >>
> root@savannah:/# uname -a > Linux savannah 4.4.0-116-generic #140-Ubuntu SMP > Mon Feb 12 21:23:04 UTC 2018 armv7l GNU/Linux > root@savannah:/# >>
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 07, 2018 09:22PM |
Admin Registered: 13 years ago Posts: 19,007 |
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 08, 2018 04:50AM |
Admin Registered: 13 years ago Posts: 19,007 |
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 08, 2018 06:54AM |
Registered: 6 years ago Posts: 42 |
Whitney # bootm 0x2000000 0x5100000 0x5000000 enter do_eth_down!!! ## Booting kernel from Legacy Image at 02000000 ... Image Name: linux Created: 2018-03-07 12:42:23 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3349200 Bytes = 3.2 MB Load Address: 00800000 Entry Point: 00800000 ## Loading init Ramdisk from Legacy Image at 05100000 ... Image Name: initramfs-4.14.24-cns3xxxx-tld-1 Created: 2018-03-08 2:44:43 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 4607521 Bytes = 4.4 MB Load Address: 00000000 Entry Point: 00000000 Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 4.14.24-cns3xxxx-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Mon Mar 5 04:42:28 PST 2018 CPU: ARMv6-compatible processor [410fb024] revision 4 (ARMv7), cr=00c5787d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: Cavium Networks CNS3420 Validation Board Memory policy: Data cache writeback Built 1 zonelists, mobility grouping on. Total pages: 65024 Kernel command line: mem=256M console=ttyS0,38400 PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 248696K/262144K available (5056K kernel code, 211K rwdata, 1020K rodata, 188K init, 99K bss, 13448K reserved, 0K cma-reserved) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc04f8470 (5058 kB) .init : 0xc05f9000 - 0xc0628000 ( 188 kB) .data : 0xc0628000 - 0xc065cee0 ( 212 kB) .bss : 0xc0662664 - 0xc067b414 ( 100 kB) Preemptible hierarchical RCU implementation. Tasks RCU enabled. NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns Console: colour dummy device 80x30 console [ttyS0] enabled Calibrating delay loop... 240.84 BogoMIPS (lpj=1204224) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok Setting up static identity map for 0x8220 - 0x8258 Hierarchical SRCU implementation. devtmpfs: initialized random: get_random_u32 called from bucket_table_alloc+0x88/0x1c4 with crng_init=0 VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes) NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations L2C: DT/platform modifies aux control register: 0x02040000 -> 0x02540000 random: fast init done L2C-310 cache controller enabled, 8 ways, 256 kB L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x06540000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb FS-Cache: Loaded NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 4500K workingset: timestamp_bits=30 max_order=16 bucket_order=0 SGI XFS with security attributes, no debug enabled io scheduler noop registered io scheduler deadline registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x78000000 (irq = 45, base_baud = 1500000) is a 16550A brd: module loaded loop: module loaded ahci ahci.0: forcing PORTS_IMPL to 0x3 ahci ahci.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc scsi host0: ahci scsi host1: ahci ata1: SATA max UDMA/133 mmio [mem 0x83000000-0x83ffffff] port 0x100 irq 65 ata2: SATA max UDMA/133 mmio [mem 0x83000000-0x83ffffff] port 0x180 irq 65 physmap platform flash device: 08000000 at 10000000 Unable to handle kernel paging request at virtual address b6f4e710 pgd = cfaf8000 [b6f4e710] *pgd=0ec57831, *pte=055583cf, *ppte=05558a2f Internal error: Oops: 81f [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 422 Comm: modprobe Not tainted 4.14.24-cns3xxxx-tld-1 #1 Hardware name: Cavium Networks CNS3420 Validation Board task: cf9b9240 task.stack: cfa96000 PC is at v6wbi_flush_user_tlb_range+0x28/0x48 LR is at change_protection_range+0x2a4/0x30c pc : [<c001ab30>] lr : [<c00c49bc>] psr: 80000013 sp : cfa97eb8 ip : 00000000 fp : cfa97f14 r10: cfafadc8 r9 : b6f50000 r8 : 00000000 r7 : 00000002 r6 : b6f50000 r5 : cec57540 r4 : 0555a34f r3 : 00000001 r2 : 00100071 r1 : b6f50000 r0 : b6f4f001 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 00c5787d Table: 0faf8008 DAC: 00000051 Process modprobe (pid: 422, stack limit = 0xcfa96188) Stack: (0xcfa97eb8 to 0xcfa98000) 7ea0: cec58ea0 b6f4e000 7ec0: cec58d20 cfa96000 cfafadc0 cec5f3c0 b6f4ffff 0555a3cf ffffffff 00000381 7ee0: b6f50000 00000002 cfa97f14 00100073 cec5f3c0 b6f4e000 cec58d20 b6f50000 7f00: 00000000 00000000 cfa97f64 cfa97f18 c00c4b44 c00c4724 00000000 00000000 7f20: cfa8b680 00000134 00000000 00000000 00000002 cfa97f74 cfa97f64 b6f50000 7f40: 00000000 b6f50000 00000001 00000005 cfa96000 b6f4e000 cfa97fa4 cfa97f68 7f60: c00c4e0c c00c4a5c 00100071 cfa97f78 c00c1874 cec5f3c0 00000022 b6f83018 7f80: b6f83018 b6f83018 0000007d c000fcc4 cfa96000 00000000 00000000 cfa97fa8 7fa0: c000fae0 c00c4cf4 b6f83018 b6f83018 b6f4e000 00002000 00000001 b6f4e000 7fc0: b6f83018 b6f83018 b6f83018 0000007d 00000002 00000000 b6f83018 bec18d5c 7fe0: 00144710 bec18c8c b6f60ed4 b6f6f33c 80000010 b6f4e000 00000000 00000000 Backtrace: [<c00c4718>] (change_protection_range) from [<c00c4b44>] (mprotect_fixup+0xf4/0x298) r10:00000000 r9:00000000 r8:b6f50000 r7:cec58d20 r6:b6f4e000 r5:cec5f3c0 r4:00100073 [<c00c4a50>] (mprotect_fixup) from [<c00c4e0c>] (SyS_mprotect+0x124/0x208) r10:b6f4e000 r9:cfa96000 r8:00000005 r7:00000001 r6:b6f50000 r5:00000000 r4:b6f50000 [<c00c4ce8>] (SyS_mprotect) from [<c000fae0>] (ret_fast_syscall+0x0/0x54) r10:00000000 r9:cfa96000 r8:c000fcc4 r7:0000007d r6:b6f83018 r5:b6f83018 r4:b6f83018 Code: e20330ff e1830600 e1a01601 e5922028 (ee080f36) ---[ end trace c62b3f7c6028f7db ]--- ata2: SATA link down (SStatus 0 SControl 300) ata1: SATA link down (SStatus 0 SControl 300)
Re: (WIP) Linux Kernel 4.14.24 Seagate Business Storage NAS (CNSxxx) package March 08, 2018 07:28AM |
Registered: 6 years ago Posts: 42 |
Re: (WIP) Linux Kernel and rootfs 4.14.24 for Seagate Business Storage NAS (CNS3xxx) package March 08, 2018 09:10AM |
Registered: 6 years ago Posts: 42 |
Freeing unused kernel memory: 188K This architecture does not have kernel memory protection. Unable to handle kernel paging request at virtual address b6d63f84 pgd = cfa1c000 [b6d63f84] *pgd=0f9d4831, *pte=0fd4218f, *ppte=0fd42a2e Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: init Not tainted 4.14.24-cns3xxxx-tld-1 #1 Hardware name: Cavium Networks CNS3420 Validation Board task: cf81f8e0 task.stack: cf820000 PC is at v6wbi_flush_user_tlb_range+0x28/0x48 LR is at change_protection_range+0x2a4/0x30c pc : [<c001ab30>] lr : [<c00c49bc>] psr: 80000013 sp : cf821eb8 ip : 00000000 fp : cf821f14 r10: cfa1edc8 r9 : b6ea8000 r8 : 00000000 r7 : 00000002 r6 : b6ea8000 r5 : cf8cc2a0 r4 : 0fd6834f r3 : 00000001 r2 : 00100071 r1 : b6ea8000 r0 : b6ea7001 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 00c5787d Table: 0fa1c008 DAC: 00000051 Process init (pid: 1, stack limit = 0xcf820188) Stack: (0xcf821eb8 to 0xcf822000) 1ea0: cf8d5ea0 b6ea6000 1ec0: cf8d5d20 cf820000 cfa1edc0 cfb07560 b6ea7fff 0fd683cf ffffffff 00000381 1ee0: b6ea8000 00000002 cf821f14 00100073 cfb07560 b6ea6000 cf8d5d20 b6ea8000 1f00: 00000000 00000000 cf821f64 cf821f18 c00c4b44 c00c4724 00000000 00000000 1f20: cfa89a40 00000134 00000000 00000000 00000002 cf821f74 cf821f64 b6ea8000 1f40: 00000000 b6ea8000 00000001 00000005 cf820000 b6ea6000 cf821fa4 cf821f68 1f60: c00c4e0c c00c4a5c 00100071 cf821f78 c00094c0 cfb07560 b6fa2000 b6fa95a8 1f80: b6fa95a8 b6fa95a8 0000007d c000fcc4 cf820000 00000000 00000000 cf821fa8 1fa0: c000fae0 c00c4cf4 b6fa95a8 b6fa95a8 b6ea6000 00002000 00000001 b6ea6000 1fc0: b6fa95a8 b6fa95a8 b6fa95a8 0000007d 00000002 00000000 b6fa95a8 bec4ddac 1fe0: 00144710 bec4dcdc b6f86ed4 b6f9533c 80000010 b6ea6000 9c713693 9c713693 Backtrace: [<c00c4718>] (change_protection_range) from [<c00c4b44>] (mprotect_fixup+0xf4/0x298) r10:00000000 r9:00000000 r8:b6ea8000 r7:cf8d5d20 r6:b6ea6000 r5:cfb07560 r4:00100073 [<c00c4a50>] (mprotect_fixup) from [<c00c4e0c>] (SyS_mprotect+0x124/0x208) r10:b6ea6000 r9:cf820000 r8:00000005 r7:00000001 r6:b6ea8000 r5:00000000 r4:b6ea8000 [<c00c4ce8>] (SyS_mprotect) from [<c000fae0>] (ret_fast_syscall+0x0/0x54) r10:00000000 r9:cf820000 r8:c000fcc4 r7:0000007d r6:b6fa95a8 r5:b6fa95a8 r4:b6fa95a8 Code: e20330ff e1830600 e1a01601 e5922028 (ee080f36) ---[ end trace 79ead98534c64208 ]---
EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem