Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 05:00PM |
Registered: 7 years ago Posts: 310 |
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 05:02PM |
Registered: 8 years ago Posts: 88 |
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 05:03PM |
Registered: 8 years ago Posts: 88 |
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 05:39PM |
Registered: 7 years ago Posts: 310 |
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 06:08PM |
Registered: 8 years ago Posts: 88 |
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 06:33PM |
Registered: 7 years ago Posts: 310 |
preboot=run preboot_nc preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 06:33PM |
Registered: 8 years ago Posts: 88 |
debian:/boot# dpkg -i linux-image-4.13.5-kirkwood-tld-1_1.0_armel.deb Selecting previously unselected package linux-image-4.13.5-kirkwood-tld-1. (Reading database ... 31003 files and directories currently installed.) Preparing to unpack linux-image-4.13.5-kirkwood-tld-1_1.0_armel.deb ... Done. Unpacking linux-image-4.13.5-kirkwood-tld-1 (1.0) ... Setting up linux-image-4.13.5-kirkwood-tld-1 (1.0) ... Hmm. There is a symbolic link /lib/modules/4.13.5-kirkwood-tld-1/build However, I can not read it: No such file or directory Therefore, I am deleting /lib/modules/4.13.5-kirkwood-tld-1/build Hmm. The package shipped with a symbolic link /lib/modules/4.13.5-kirkwood-tld-1/source However, I can not read the target: No such file or directory Therefore, I am deleting /lib/modules/4.13.5-kirkwood-tld-1/source Running depmod. Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.13.5-kirkwood-tld-1 /boot/vmlinuz-4.13.5-kirkwood-tld-1 run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.13.5-kirkwood-tld-1 /boot/vmlinuz-4.13.5-kirkwood-tld-1 update-initramfs: Generating /boot/initrd.img-4.13.5-kirkwood-tld-1 W: mdadm: /etc/mdadm/mdadm.conf defines no arrays. W: mdadm: no arrays defined in configuration file. run-parts: executing /etc/kernel/postinst.d/zz-flash-kernel 4.13.5-kirkwood-tld-1 /boot/vmlinuz-4.13.5-kirkwood-tld-1 debian:/boot#
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 06:36PM |
Registered: 7 years ago Posts: 310 |
> debian:/boot# dpkg -i > linux-image-4.13.5-kirkwood-tld-1_1.0_armel.deb > Selecting previously unselected package > linux-image-4.13.5-kirkwood-tld-1. > (Reading database ... 31003 files and directories > currently installed.) > Preparing to unpack > linux-image-4.13.5-kirkwood-tld-1_1.0_armel.deb > ... > Done. > Unpacking linux-image-4.13.5-kirkwood-tld-1 (1.0) > ... > Setting up linux-image-4.13.5-kirkwood-tld-1 (1.0) > ... > > Hmm. There is a symbolic link > /lib/modules/4.13.5-kirkwood-tld-1/build > However, I can not read it: No such file or > directory > Therefore, I am deleting > /lib/modules/4.13.5-kirkwood-tld-1/build > > > Hmm. The package shipped with a symbolic link > /lib/modules/4.13.5-kirkwood-tld-1/source > However, I can not read the target: No such file > or directory > Therefore, I am deleting > /lib/modules/4.13.5-kirkwood-tld-1/source > > Running depmod. > Examining /etc/kernel/postinst.d. > run-parts: executing > /etc/kernel/postinst.d/apt-auto-removal > 4.13.5-kirkwood-tld-1 > /boot/vmlinuz-4.13.5-kirkwood-tld-1 > run-parts: executing > /etc/kernel/postinst.d/initramfs-tools > 4.13.5-kirkwood-tld-1 > /boot/vmlinuz-4.13.5-kirkwood-tld-1 > update-initramfs: Generating > /boot/initrd.img-4.13.5-kirkwood-tld-1 > W: mdadm: /etc/mdadm/mdadm.conf defines no > arrays. > W: mdadm: no arrays defined in configuration > file. > run-parts: executing > /etc/kernel/postinst.d/zz-flash-kernel > 4.13.5-kirkwood-tld-1 > /boot/vmlinuz-4.13.5-kirkwood-tld-1 > debian:/boot# > >
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 06:39PM |
Registered: 8 years ago Posts: 88 |
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 06:43PM |
Registered: 7 years ago Posts: 310 |
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 06:52PM |
Registered: 8 years ago Posts: 88 |
- Set U-Boot envs for booting. The u-boot envs below are for 1st time upgrading, you don't need to do this step if you've installed the latest U-Boot for Kirkwood. Just make sure the DTB file is the correct one for your box, replace kirkwood-goflexnet.dtb below with the correct DTB name for your box. fw_setenv load_dtb 'ext2load usb 0:1 0x1c00000 /boot/dts/kirkwood-goflexnet.dtb' fw_setenv load_initrd 'ext2load usb 0:1 0x1100000 /boot/uInitrd' fw_setenv load_uimage 'ext2load usb 0:1 0x800000 /boot/uImage' fw_setenv usb_boot 'run load_dtb; run load_uimage; if run load_initrd; then bootm 0x800000 0x1100000 0x1c00000; else bootm 0x800000 - 0x1c00000; fi'
debian:/boot# fw_printenv load_dtb load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file debian:/boot# fw_printenv load_initrd load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd debian:/boot# fw_printenv load_uimage load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage debian:/boot# fw_printenv usb_boot ## Error: "usb_boot" not defined
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 06:58PM |
Registered: 8 years ago Posts: 88 |
debian:/media/sdb1/boot# debian:/media/sdb1/boot# debian:/media/sdb1/boot# fw_printenv bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb device=0:1 devices=usb ide mmc ethact=egiga0 if_netconsole=ping $serverip led_error=orange blinking led_exit=green off led_init=green blinking dtb_file=/boot/dts/kirkwood-pogo_e02.dtb load_dtb_addr=0x1c00000 load_initrd_addr=0x1100000 load_uimage_addr=0x800000 load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) partition=nand0,2 preboot_nc=run if_netconsole start_netconsole scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi usb_ready_retry=15 arcNumber=3542 machid=dd6 ethaddr=00:25:31:04:80:8C serverip=192.168.222.103 ipaddr=192.168.222.168 disks=0 1 2 3 4 5 6 7 debian:/media/sdb1/boot# debian:/media/sdb1/boot# debian:/media/sdb1/boot#
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 06:58PM |
Registered: 7 years ago Posts: 310 |
> - Set U-Boot envs for booting. The u-boot envs > below are for 1st time upgrading, you don't need > to do this step if you've installed the latest > U-Boot for Kirkwood. Just make sure the DTB file > is the correct one for your box, replace > kirkwood-goflexnet.dtb below with the correct DTB > name for your box. > > fw_setenv load_dtb 'ext2load usb 0:1 0x1c00000 > /boot/dts/kirkwood-goflexnet.dtb' > fw_setenv load_initrd 'ext2load usb 0:1 0x1100000 > /boot/uInitrd' > fw_setenv load_uimage 'ext2load usb 0:1 0x800000 > /boot/uImage' > fw_setenv usb_boot 'run load_dtb; run load_uimage; > if run load_initrd; then bootm 0x800000 0x1100000 > 0x1c00000; else bootm 0x800000 - 0x1c00000; fi' >>
> debian:/boot# fw_printenv load_dtb > load_dtb=echo loading DTB $dtb_file ...; load > $bootdev $device $load_dtb_addr $dtb_file > debian:/boot# fw_printenv load_initrd > load_initrd=echo loading uInitrd ...; load > $bootdev $device $load_initrd_addr /boot/uInitrd > debian:/boot# fw_printenv load_uimage > load_uimage=echo loading uImage ...; load $bootdev > $device $load_uimage_addr /boot/uImage > debian:/boot# fw_printenv usb_boot > ## Error: "usb_boot" not defined > >
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 07:19PM |
Registered: 8 years ago Posts: 88 |
debian:/boot# debian:/boot# debian:/boot# fw_printenv bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb device=0:1 devices=usb ide mmc ethact=egiga0 if_netconsole=ping $serverip led_error=orange blinking led_exit=green off led_init=green blinking dtb_file=/boot/dts/kirkwood-pogo_e02.dtb load_dtb_addr=0x1c00000 load_initrd_addr=0x1100000 load_uimage_addr=0x800000 mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) partition=nand0,2 preboot_nc=run if_netconsole start_netconsole scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi usb_ready_retry=15 arcNumber=3542 machid=dd6 ethaddr=00:25:31:04:80:8C serverip=192.168.222.103 ipaddr=192.168.222.168 disks=0 1 2 3 4 5 6 7 load_dtb=ext2load usb 0:1 0x1c00000 /boot/dts/dts/kirkwood-pogo_e02.dtb load_initrd=ext2load usb 0:1 0x1100000 /boot/uInitrd load_uimage=ext2load usb 0:1 0x800000 /boot/uImage usb_boot=run load_dtb; run load_uimage; if run load_initrd; then bootm 0x800000 0x1100000 0x1c00000; else bootm 0x800000 - 0x1c00000; fi debian:/boot# debian:/boot#
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 07:33PM |
Registered: 7 years ago Posts: 310 |
> debian:/boot# > debian:/boot# > debian:/boot# fw_printenv > bootcmd_exec=run load_uimage; if run load_initrd; > then if run load_dtb; then bootm $load_uimage_addr > $load_initrd_addr $load_dtb_addr; else bootm > $load_uimage_addr $load_initrd_addr; fi; else if > run load_dtb; then bootm $load_uimage_addr - > $load_dtb_addr; else bootm $load_uimage_addr; fi; > fi > bootcmd=run bootcmd_uenv; run scan_disk; run > set_bootargs; run bootcmd_exec > bootcmd_uenv=run uenv_load; if test $uenv_loaded > -eq 1; then run uenv_import; fi > bootdelay=10 > bootdev=usb > device=0:1 > devices=usb ide mmc > ethact=egiga0 > if_netconsole=ping $serverip > led_error=orange blinking > led_exit=green off > led_init=green blinking > dtb_file=/boot/dts/kirkwood-pogo_e02.dtb > load_dtb_addr=0x1c00000 > load_initrd_addr=0x1100000 > load_uimage_addr=0x800000 > mainlineLinux=yes > mtdids=nand0=orion_nand > mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) > partition=nand0,2 > preboot_nc=run if_netconsole start_netconsole > scan_disk=echo running scan_disk ...; scan_done=0; > setenv scan_usb "usb start"; setenv scan_ide "ide > reset"; setenv scan_mmc "mmc rescan"; for dev in > $devices; do if test $scan_done -eq 0; then echo > Scan device $dev; run scan_$dev; for disknum in > $disks; do if test $scan_done -eq 0; then echo > device $dev $disknum:1; if load $dev $disknum:1 > $load_uimage_addr /boot/uImage 1; then > scan_done=1; echo Found bootable drive on $dev > $disknum; setenv device $disknum:1; setenv bootdev > $dev; fi; fi; done; fi; done > set_bootargs=setenv bootargs console=ttyS0,115200 > root=LABEL=rootfs rootdelay=10 $mtdparts > $custom_params > start_netconsole=setenv ncip $serverip; setenv > bootdelay 10; setenv stdin nc; setenv stdout nc; > setenv stderr nc; version; > stderr=serial > stdin=serial > stdout=serial > uenv_addr=0x810000 > uenv_import=echo importing envs ...; env import -t > $uenv_addr $filesize > uenv_init_devices=setenv init_usb "usb start"; > setenv init_ide "ide reset"; setenv init_mmc "mmc > rescan"; for devtype in $devices; do run > init_$devtype; done; > uenv_load=run uenv_init_devices; setenv > uenv_loaded 0; for devtype in $devices; do for > disknum in 0; do run uenv_read_disk; done; done; > uenv_read_disk=if test $devtype -eq mmc; then if > $devtype part; then run uenv_read; fi; else if > $devtype part $disknum; then run uenv_read; fi; > fi > uenv_read=echo loading envs from $devtype $disknum > ...; if load $devtype $disknum:1 $uenv_addr > /boot/uEnv.txt; then setenv uenv_loaded 1; fi > usb_ready_retry=15 > arcNumber=3542 > machid=dd6 > ethaddr=00:25:31:04:80:8C > serverip=192.168.222.103 > ipaddr=192.168.222.168 > disks=0 1 2 3 4 5 6 7 > load_dtb=ext2load usb 0:1 0x1c00000 > /boot/dts/dts/kirkwood-pogo_e02.dtb > load_initrd=ext2load usb 0:1 0x1100000 > /boot/uInitrd > load_uimage=ext2load usb 0:1 0x800000 > /boot/uImage > usb_boot=run load_dtb; run load_uimage; if run > load_initrd; then bootm 0x800000 0x1100000 > 0x1c00000; else bootm 0x800000 - 0x1c00000; fi > debian:/boot# > debian:/boot# > >
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 07:50PM |
Registered: 8 years ago Posts: 88 |
debian:/boot# debian:/boot# fw_printenv bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb device=0:1 devices=usb ide mmc ethact=egiga0 if_netconsole=ping $serverip led_error=orange blinking led_exit=green off led_init=green blinking dtb_file=/boot/dts/kirkwood-pogo_e02.dtb load_dtb_addr=0x1c00000 load_initrd_addr=0x1100000 load_uimage_addr=0x800000 mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) partition=nand0,2 scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi usb_ready_retry=15 arcNumber=3542 machid=dd6 ethaddr=00:25:31:04:80:8C disks=0 1 2 3 4 5 6 7 load_dtb=ext2load usb 0:1 0x1c00000 /boot/dts/dts/kirkwood-pogo_e02.dtb load_initrd=ext2load usb 0:1 0x1100000 /boot/uInitrd load_uimage=ext2load usb 0:1 0x800000 /boot/uImage usb_boot=run load_dtb; run load_uimage; if run load_initrd; then bootm 0x800000 0x1100000 0x1c00000; else bootm 0x800000 - 0x1c00000; fi preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi preboot=run preboot_nc ipaddr=192.168.222.168 serverip=192.168.222.103 debian:/boot# debian:/boot# debian:/boot# uname -a Linux debian 3.16.0-4-kirkwood #1 Debian 3.16.48-1 (2017-09-28) armv5tel GNU/Linux debian:/boot# debian:/boot#
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 08:18PM |
Registered: 7 years ago Posts: 310 |
> debian:/boot# > debian:/boot# fw_printenv > bootcmd_exec=run load_uimage; if run load_initrd; > then if run load_dtb; then bootm $load_uimage_addr > $load_initrd_addr $load_dtb_addr; else bootm > $load_uimage_addr $load_initrd_addr; fi; else if > run load_dtb; then bootm $load_uimage_addr - > $load_dtb_addr; else bootm $load_uimage_addr; fi; > fi > bootcmd=run bootcmd_uenv; run scan_disk; run > set_bootargs; run bootcmd_exec > bootcmd_uenv=run uenv_load; if test $uenv_loaded > -eq 1; then run uenv_import; fi > bootdelay=10 > bootdev=usb > device=0:1 > devices=usb ide mmc > ethact=egiga0 > if_netconsole=ping $serverip > led_error=orange blinking > led_exit=green off > led_init=green blinking > dtb_file=/boot/dts/kirkwood-pogo_e02.dtb > load_dtb_addr=0x1c00000 > load_initrd_addr=0x1100000 > load_uimage_addr=0x800000 > mainlineLinux=yes > mtdids=nand0=orion_nand > mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) > partition=nand0,2 > scan_disk=echo running scan_disk ...; scan_done=0; > setenv scan_usb "usb start"; setenv scan_ide "ide > reset"; setenv scan_mmc "mmc rescan"; for dev in > $devices; do if test $scan_done -eq 0; then echo > Scan device $dev; run scan_$dev; for disknum in > $disks; do if test $scan_done -eq 0; then echo > device $dev $disknum:1; if load $dev $disknum:1 > $load_uimage_addr /boot/uImage 1; then > scan_done=1; echo Found bootable drive on $dev > $disknum; setenv device $disknum:1; setenv bootdev > $dev; fi; fi; done; fi; done > set_bootargs=setenv bootargs console=ttyS0,115200 > root=LABEL=rootfs rootdelay=10 $mtdparts > $custom_params > start_netconsole=setenv ncip $serverip; setenv > bootdelay 10; setenv stdin nc; setenv stdout nc; > setenv stderr nc; version; > stderr=serial > stdin=serial > stdout=serial > uenv_addr=0x810000 > uenv_import=echo importing envs ...; env import -t > $uenv_addr $filesize > uenv_init_devices=setenv init_usb "usb start"; > setenv init_ide "ide reset"; setenv init_mmc "mmc > rescan"; for devtype in $devices; do run > init_$devtype; done; > uenv_load=run uenv_init_devices; setenv > uenv_loaded 0; for devtype in $devices; do for > disknum in 0; do run uenv_read_disk; done; done; > uenv_read_disk=if test $devtype -eq mmc; then if > $devtype part; then run uenv_read; fi; else if > $devtype part $disknum; then run uenv_read; fi; > fi > uenv_read=echo loading envs from $devtype $disknum > ...; if load $devtype $disknum:1 $uenv_addr > /boot/uEnv.txt; then setenv uenv_loaded 1; fi > usb_ready_retry=15 > arcNumber=3542 > machid=dd6 > ethaddr=00:25:31:04:80:8C > disks=0 1 2 3 4 5 6 7 > load_dtb=ext2load usb 0:1 0x1c00000 > /boot/dts/dts/kirkwood-pogo_e02.dtb > load_initrd=ext2load usb 0:1 0x1100000 > /boot/uInitrd > load_uimage=ext2load usb 0:1 0x800000 > /boot/uImage > usb_boot=run load_dtb; run load_uimage; if run > load_initrd; then bootm 0x800000 0x1100000 > 0x1c00000; else bootm 0x800000 - 0x1c00000; fi > preboot_nc=setenv nc_ready 0; for pingstat in 1 2 > 3 4 5; do; sleep 1; if run if_netconsole; then > setenv nc_ready 1; fi; done; if test $nc_ready -eq > 1; then run start_netconsole; fi > preboot=run preboot_nc > ipaddr=192.168.222.168 > serverip=192.168.222.103 > debian:/boot# > debian:/boot# > debian:/boot# uname -a > Linux debian 3.16.0-4-kirkwood #1 Debian 3.16.48-1 > (2017-09-28) armv5tel GNU/Linux > debian:/boot# > debian:/boot# > >
> uInitrd > uImage > initrd.img-xx.xx.xx-kirkwood-xxx > System.map-xx.xx.xx-kirkwood-xxx > vmlinuz-xx.xx.xx-kirkwood-xxx > config-xx.xx.xx-kirkwood-xxx > dts/ >>
> cd /boot > tar -xjf linux-4.8.0-kirkwood-tld-1-bodhi.tar.bz2 > tar -xf linux-dtb-4.8.0-kirkwood-tld-1.tar >>
> cd /boot > apt-get remove flash-kernel > dpkg -i linux-image-4.8.0-kirkwood-tld-1_1.0_armel.deb >>
> cd /boot > mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-4.8.0-kirkwood-tld-1-d vmlinuz-4.8.0-kirkwood-tld-1 uImage > mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-4.8.0-kirkwood-tld-1-d initrd.img-4.8.0-kirkwood-tld-1 uInitrd >>
> fw_setenv load_dtb 'ext2load usb 0:1 0x1c00000 > /boot/dts/kirkwood-goflexnet.dtb' > fw_setenv load_initrd 'ext2load usb 0:1 0x1100000 > /boot/uInitrd' > fw_setenv load_uimage 'ext2load usb 0:1 0x800000 > /boot/uImage' > fw_setenv usb_boot 'run load_dtb; run load_uimage; > if run load_initrd; then bootm 0x800000 0x1100000 > 0x1c00000; else bootm 0x800000 - 0x1c00000; fi' >>
> sync > sync > sync > shutdown -r now >>
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 08:41PM |
Registered: 8 years ago Posts: 88 |
│ You are attempting to install a kernel image (version 4.13.5-kirkwood-tld-1) However, the directory /lib/modules/4.13.5-kirkwood-tld-1/kernel still exists. If │ │ this directory belongs to a previous linux-image-4.13.5-kirkwood-tld-1 package, and if you have deselected some modules, or installed standalone modules │ │ packages, this could be bad. │ │ │ │ If /lib/modules/4.13.5-kirkwood-tld-1/kernel belongs to an old install of linux-image-4.13.5-kirkwood-tld-1, then this is your last chance to abort the │ │ installation of this kernel image (nothing has been changed yet). │ │ │ │ If you know what you are doing, and if you feel that this image should be installed despite this anomaly, Please answer n to the question. │ │ │ │ Otherwise, I suggest you move /lib/modules/4.13.5-kirkwood-tld-1/kernel out of the way, perhaps to /lib/modules/4.13.5-kirkwood-tld-1.kernel.old or something, │ │ and then try re-installing this image. │ │ │ │ Stop install since the kernel-image is already installed? │ │ │ │ <Yes> <No> │
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 08:45PM |
Registered: 7 years ago Posts: 310 |
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 09:02PM |
Registered: 8 years ago Posts: 88 |
debian:/boot# debian:/boot# mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-4.13.5-kirkwood-tld-1 -d vmlinuz-4.13.5-kirkwood-tld-1 uImage Image Name: Linux-4.13.5-kirkwood-tld-1 Created: Fri Oct 20 18:50:32 2017 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3848000 Bytes = 3757.81 kB = 3.67 MB Load Address: 00008000 Entry Point: 00008000 debian:/boot# mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-4.13.5-kirkwood-tld-1 -d initrd.img-4.13.5-kirkwood-tld-1 uInitrd Image Name: initramfs-4.13.5-kirkwood-tld-1 Created: Fri Oct 20 18:51:39 2017 Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7530317 Bytes = 7353.83 kB = 7.18 MB Load Address: 00000000 Entry Point: 00000000 debian:/boot# fw_setenv load_dtb 'ext2load usb 0:1 0x1c00000 /boot/dts/dts/kirkwood-pogo_e02.dtb' debian:/boot# debian:/boot# fw_setenv load_initrd 'ext2load usb 0:1 0x1100000 /boot/uInitrd' debian:/boot# fw_setenv load_uimage 'ext2load usb 0:1 0x800000 /boot/uImage' debian:/boot# fw_setenv usb_boot 'run load_dtb; run load_uimage; if run load_initrd; then bootm 0x800000 0x1100000 0x1c00000; else bootm 0x800000 - 0x1c00000; fi' debian:/boot# debian:/boot# sync debian:/boot# sync debian:/boot# sync debian:/boot# debian:/boot# debian:/boot# uname -a Linux debian 3.16.0-4-kirkwood #1 Debian 3.16.48-1 (2017-09-28) armv5tel GNU/Linux debian:/boot# debian:/boot# debian:/boot# fw_printenv bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb device=0:1 devices=usb ide mmc ethact=egiga0 if_netconsole=ping $serverip led_error=orange blinking led_exit=green off led_init=green blinking dtb_file=/boot/dts/kirkwood-pogo_e02.dtb load_dtb_addr=0x1c00000 load_initrd_addr=0x1100000 load_uimage_addr=0x800000 mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) partition=nand0,2 scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi usb_ready_retry=15 arcNumber=3542 machid=dd6 ethaddr=00:25:31:04:80:8C disks=0 1 2 3 4 5 6 7 preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi preboot=run preboot_nc ipaddr=192.168.222.168 serverip=192.168.222.103 load_dtb=ext2load usb 0:1 0x1c00000 /boot/dts/dts/kirkwood-pogo_e02.dtb load_initrd=ext2load usb 0:1 0x1100000 /boot/uInitrd load_uimage=ext2load usb 0:1 0x800000 /boot/uImage usb_boot=run load_dtb; run load_uimage; if run load_initrd; then bootm 0x800000 0x1100000 0x1c00000; else bootm 0x800000 - 0x1c00000; fi debian:/boot#
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 09:07PM |
Admin Registered: 13 years ago Posts: 18,575 |
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 09:27PM |
Registered: 7 years ago Posts: 310 |
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 09:45PM |
Registered: 8 years ago Posts: 88 |
Re: Pogoplug E02 Debian Linux Installation Guide October 20, 2017 09:48PM |
Registered: 7 years ago Posts: 310 |
Re: Pogoplug E02 Debian Linux Installation Guide October 21, 2017 12:08AM |
Admin Registered: 13 years ago Posts: 18,575 |
Re: Pogoplug E02 Debian Linux Installation Guide October 21, 2017 12:11AM |
Admin Registered: 13 years ago Posts: 18,575 |
Re: Pogoplug E02 Debian Linux Installation Guide October 21, 2017 12:12AM |
Registered: 8 years ago Posts: 88 |
Re: Pogoplug E02 Debian Linux Installation Guide October 21, 2017 12:17AM |
Admin Registered: 13 years ago Posts: 18,575 |
Re: Pogoplug E02 Debian Linux Installation Guide October 21, 2017 12:26AM |
Admin Registered: 13 years ago Posts: 18,575 |
uname -a dpkg -l | grep linux-image ls -lart /lib/modules/ -d cat /proc/mtd dmesg | grep -i bad mount
cat /etc/fw_env.config fw_printenv
ls -latr /boot ls -latr /boot/dts/kirkwood-*pogo*
Re: Pogoplug E02 Debian Linux Installation Guide October 21, 2017 12:34AM |
Registered: 8 years ago Posts: 88 |
debian:/boot# debian:/boot# debian:/boot# uname -a Linux debian 3.16.0-4-kirkwood #1 Debian 3.16.48-1 (2017-09-28) armv5tel GNU/Linux debian:/boot# debian:/boot# debian:/boot# dpkg -l | grep linux-image ii linux-image-2.6-kirkwood 3.2+46 armel Linux for Marvell Kirkwood (dummy package) rc linux-image-2.6.32-5-kirkwood 2.6.32-48squeeze6 armel Linux 2.6.32 for Marvell Kirkwood ii linux-image-3.16.0-4-kirkwood 3.16.48-1 armel Linux 3.16 for Marvell Kirkwood rc linux-image-3.2.0-4-kirkwood 3.2.93-1 armel Linux 3.2 for Marvell Kirkwood ii linux-image-4.13.5-kirkwood-tld-1 1.0 armel Linux kernel binary image for version 4.13.5-kirkwood-tld-1 ii linux-image-kirkwood 3.16+63 armel Linux for Marvell Kirkwood (meta-package) debian:/boot# debian:/boot# debian:/boot# debian:/boot# ls -lart /lib/modules/ -d drwxr-xr-x 7 root root 4096 Oct 20 16:29 /lib/modules/ debian:/boot# debian:/boot# debian:/boot# debian:/boot# cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 "u-boot" mtd1: 00400000 00020000 "uImage" mtd2: 02000000 00020000 "rootfs" mtd3: 05b00000 00020000 "data" debian:/boot# debian:/boot# debian:/boot# debian:/boot# dmesg | grep -i bad [ 1.661183] Scanning device for bad blocks debian:/boot# debian:/boot# debian:/boot# debian:/boot# debian:/boot# debian:/boot# mount sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) udev on /dev type devtmpfs (rw,relatime,size=10240k,nr_inodes=30391,mode=755) devpts on /dev/pts type devpts (rw,relatime,mode=600,ptmxmode=000) tmpfs on /run type tmpfs (rw,nosuid,relatime,size=50748k,mode=755) /dev/sda1 on / type ext2 (rw,noatime,errors=remount-ro) securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k) tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755) cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd) cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset) cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct) cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices) cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer) cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio) cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio) cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event) systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=22,pgrp=1,timeout=300,minproto=5,maxproto=5,direct) debugfs on /sys/kernel/debug type debugfs (rw,relatime) mqueue on /dev/mqueue type mqueue (rw,relatime) tmpfs on /run/user/0 type tmpfs (rw,nosuid,nodev,relatime,size=25376k,mode=700) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime) /dev/sdb1 on /media/sdb1 type ext3 (rw,relatime,data=ordered) debian:/boot# debian:/boot# debian:/boot# debian:/boot# cat /etc/fw_env.config # Configuration file for fw_(printenv/saveenv) utility. # Up to two entries are valid, in this case the redundant # environment sector is assumed present. # Notice, that the "Number of sectors" is ignored on NOR. # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd0 0xc0000 0x20000 0x20000 debian:/boot# debian:/boot# debian:/boot# debian:/boot# debian:/boot# debian:/boot# debian:/boot# fw_printenv bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb device=0:1 devices=usb ide mmc ethact=egiga0 if_netconsole=ping $serverip led_error=orange blinking led_exit=green off led_init=green blinking dtb_file=/boot/dts/kirkwood-pogo_e02.dtb load_dtb_addr=0x1c00000 load_initrd_addr=0x1100000 load_uimage_addr=0x800000 mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) partition=nand0,2 scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi usb_ready_retry=15 arcNumber=3542 machid=dd6 ethaddr=00:25:31:04:80:8C disks=0 1 2 3 4 5 6 7 preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi preboot=run preboot_nc ipaddr=192.168.222.168 serverip=192.168.222.103 load_dtb=ext2load usb 0:1 0x1c00000 /boot/dts/dts/kirkwood-pogo_e02.dtb load_initrd=ext2load usb 0:1 0x1100000 /boot/uInitrd load_uimage=ext2load usb 0:1 0x800000 /boot/uImage usb_boot=run load_dtb; run load_uimage; if run load_initrd; then bootm 0x800000 0x1100000 0x1c00000; else bootm 0x800000 - 0x1c00000; fi debian:/boot# debian:/boot# debian:/boot# debian:/boot# ls -latr /boot total 81368 drwxr-xr-x 2 root root 4096 Sep 20 01:13 dts -rw-r--r-- 1 root root 154699 Oct 7 01:53 config-4.13.5-kirkwood-tld-1 -rw------- 1 root root 3848000 Oct 7 04:26 vmlinuz-4.13.5-kirkwood-tld-1 -rw------- 1 root root 2546047 Oct 7 04:26 System.map-4.13.5-kirkwood-tld-1 -rw-r--r-- 1 root root 2076472 Oct 8 13:14 vmlinuz-3.16.0-4-kirkwood -rw-r--r-- 1 root root 1626486 Oct 8 13:15 System.map-3.16.0-4-kirkwood -rw-r--r-- 1 root root 135770 Oct 8 13:15 config-3.16.0-4-kirkwood drwxr-xr-x 21 root root 4096 Oct 19 12:53 .. -rw-r--r-- 1 root root 1619296 Oct 19 13:40 uImage.bak -rw-r--r-- 1 root root 8967613 Oct 19 13:40 uInitrd.bak lrwxrwxrwx 1 root root 25 Oct 19 14:16 vmlinuz -> vmlinuz-3.16.0-4-kirkwood lrwxrwxrwx 1 root root 28 Oct 19 14:16 initrd.img -> initrd.img-3.16.0-4-kirkwood -rw-r--r-- 1 root root 10586875 Oct 19 14:17 initrd.img-3.16.0-4-kirkwood -rw-r--r-- 1 root root 10260 Oct 19 14:17 dtb-3.16.0-4-kirkwood.bak lrwxrwxrwx 1 root root 21 Oct 19 14:21 dtb.bak -> dtb-3.16.0-4-kirkwood -rw-r--r-- 1 root root 10260 Oct 19 14:21 dtb-3.16.0-4-kirkwood -rw-r--r-- 1 root root 10260 Oct 19 14:21 dtb -rw-r--r-- 1 root root 89 Oct 20 14:40 uEnv.txt drwxr-xr-x 2 root root 4096 Oct 20 16:15 BACKUP -rw-r--r-- 1 root root 142721 Oct 20 16:26 linux-4.13.5-kirkwood-tld-1.patch -rw-r--r-- 1 root root 1300480 Oct 20 16:26 linux-dtb-4.13.5-kirkwood-tld-1.tar -rw-r--r-- 1 root root 8653960 Oct 20 16:26 linux-headers-4.13.5-kirkwood-tld-1_1.0_armel.deb -rw-r--r-- 1 root root 18669874 Oct 20 16:26 linux-image-4.13.5-kirkwood-tld-1_1.0_armel.deb -rwxr-xr-x 1 root root 3848000 Oct 20 16:26 zImage-4.13.5-kirkwood-tld-1 -rw-r--r-- 1 root root 7530317 Oct 20 16:31 initrd.img-4.13.5-kirkwood-tld-1 drwxr-xr-x 4 root root 4096 Oct 20 18:29 . -rw-r--r-- 1 root root 3848064 Oct 20 18:50 uImage -rw-r--r-- 1 root root 7530381 Oct 20 18:51 uInitrd debian:/boot# debian:/boot# debian:/boot# debian:/boot# ls -latr /boot/dts/kirkwood-*pogo* -rw-r--r-- 1 root root 10284 Oct 7 15:12 /boot/dts/kirkwood-pogoplug_v4.dtb -rw-r--r-- 1 root root 10444 Oct 7 15:52 /boot/dts/kirkwood-pogo_e02.dtb debian:/boot# debian:/boot# debian:/boot#