Welcome! Log In Create A New Profile

Advanced

new kernel package ready to use

Posted by gorgone 
Re: new kernel package ready to use
August 28, 2011 04:02PM
Hi Gorgone,
is it possible to get your Kernel-Config file?

Thanks a lot,
Thomas
Re: new kernel package ready to use
June 29, 2012 07:44AM
gorgone Wrote:
-------------------------------------------------------
> Now 2.6.35.7.4 online
>
> fixed contrac sisusbvga(+consoleswitch)
> ntfs(readonly) hfs hfs+ support
> usbgadgets addet automount fixed add i2c code
>
>
> cd /tmp
>
> fetch the kernel
>
> wget 193.16.217.9/files/dockstarheavy.deb
>
> kernel install/overwrite (save the old one)
>
> dpkg -i --force-overwrite dockstarheavy.deb
>
> !!!!!!!!!! u must rename the old initrd or delete
> thanks to weo for the hint...
>
> mv /boot/uInitrd /boot/org.uInitrd
>
>
>
    >
  • ...none … LED off
    >
  • ...nand-disk … LED nand activity
    >
  • ...timer ... time controled LED
    >
  • ...heartbeat … LED blinks like the
    > heartbeat
    >
  • ...default-on … LED allways on
    >
> add this 2 lines to rc.local
> this disables heartbeat and sets the green LED on
>
> echo default-on >
> /sys/class/leds/dockstar\:green\:health/trigger
> echo none       >
> /sys/class/leds/dockstar\:orange\:misc/trigger
>
>
> add this line
>
> echo none >
> /sys/class/leds/dockstar\:green\:health/trigger
>
> under
>
> log_action_msg "Will now halt"
> halt -d -f $netdown $poweroff $hddown
>
> in /etc/init.d/halt
> this shows u when it is safe to remove disks and
> power cable
> on init 0 or halt command
>
> my modify full install with nfs samba and ftp(root
> access)
> with all fixes and script patches
> german howto
> http://
> ss4200.homelinux.com/dockstar/

>
> cd /tmp
> wget
> http://ss4200.homelinux.com/dockstar/gogo-dock.sh
> chmod 777 gogo-dock.sh
> ./gogo-dock.sh
>

Guten Tag, folgendes problem: nach dem ich Kernel update, und überschreibe, booten Dokstar nicht, versuchte ganzen script ausführen (ss4200.homelinux.com/dockstar/gogo-dock.sh) kommt das selbe raus, läuft nur wenn ich doozan image installiere. Woran kann das liegen?

Mfg. Pendalf
Re: new kernel package ready to use
July 21, 2012 09:03AM
Hi,

the reason is that Gorgone's kernel does not work with the new uBoot. I noticed that when I tried to run a stick I had produced about a year ago with a newly adapted Dockstar.

In the meantime I successfully adapted everything based on Wheezy install script (where I also use a separate Boot-Partition) and this works just fine. It was necessary to adapt Gorgone's prepare-script step by step (as well as install a few extras like nfs, samba, locales, dialog etc.).

I have attached the adapted script, which should run more or less out of the box. You just have to check for paths, as I did not want to clutter my stick with all the additional files and moved those to a docked HDD.

Hope this helps.

Cheers,

chessplayer
Attachments:
open | download - oscam_gen.sh.gz (1.7 KB)
Re: new kernel package ready to use
April 10, 2013 02:07PM
Hello.
I installed the gorgone-kernel on my dockstar because i wanted to use a DVB-S2-device (Tevii S660) for vdr.
I read that the devices is supported by newer kernels and hoped that it is enough to install gorgone's kernel, but after i rebooted the dockstar the device ist still not recognized correctly.

Do i have to modify something?
I need the S2-liplianin-modules but i can't compile them because i do not have the sources.
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: