Re: new kernel package ready to use January 07, 2011 03:59PM |
Registered: 14 years ago Posts: 166 |
Re: new kernel package ready to use January 09, 2011 04:18PM |
Registered: 14 years ago Posts: 13 |
Re: new kernel package ready to use January 09, 2011 04:26PM |
Registered: 14 years ago Posts: 166 |
Re: new kernel package ready to use January 09, 2011 04:32PM |
Registered: 13 years ago Posts: 5 |
Re: new kernel package ready to use January 09, 2011 04:45PM |
Registered: 14 years ago Posts: 166 |
Re: new kernel package ready to use January 10, 2011 06:36AM |
Registered: 13 years ago Posts: 5 |
Signal9
Apt-get upgrade January 12, 2011 12:34AM |
Re: new kernel package ready to use January 14, 2011 12:16AM |
Registered: 13 years ago Posts: 18 |
Re: new kernel package ready to use January 14, 2011 03:08AM |
Registered: 13 years ago Posts: 5 |
Re: new kernel package ready to use January 14, 2011 03:16AM |
Registered: 13 years ago Posts: 18 |
Quote
Jeff
To create an image of mtd0, you need to dump the nand without ecc. using "dd if=/dev/mtd0 of=mtd0.DOESNOTWORK" will automatically do ecc for you and will result in a corrupt image.
ingmar_k
Re: new kernel package ready to use January 15, 2011 06:44AM |
Re: new kernel package ready to use January 15, 2011 06:56AM |
Registered: 14 years ago Posts: 166 |
ingmar_k
Re: new kernel package ready to use January 15, 2011 08:00AM |
Re: new kernel package ready to use January 15, 2011 10:22AM |
Registered: 14 years ago Posts: 166 |
ingmar_k
Re: new kernel package ready to use January 15, 2011 12:34PM |
Re: new kernel package ready to use January 15, 2011 04:51PM |
Registered: 13 years ago Posts: 18 |
dpkg-deb: building package `linux-image-2.6.37-dockstar' in `../linux-image-2.6.37-dockstar_1.1_armel.deb'.
Re: new kernel package ready to use January 15, 2011 07:53PM |
Registered: 14 years ago Posts: 166 |
/sys/class/leds/dockstar:green:health /sys/class/leds/dockstar:orange:health options to set for trigger "[none] nand-disk mmc0 timer heartbeat default-on"
Re: new kernel package ready to use January 16, 2011 02:35AM |
Registered: 14 years ago Posts: 8 |
Re: new kernel package ready to use January 16, 2011 04:56AM |
Registered: 14 years ago Posts: 166 |
Re: new kernel package ready to use January 16, 2011 11:28AM |
Registered: 13 years ago Posts: 18 |
root@debian:~# dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37-dockstar (samson@ubutuvm1004) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #1 Sun Jan 16 00:04:59 HKT 2011 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Marvell SheevaPlug Reference Board [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c03d41ac, node_mem_map c043f000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32512 pages, LIFO batch:7 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext2 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 120728k/120728k available, 10344k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xc8800000 - 0xfe800000 ( 864 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc0029000 ( 132 kB) [ 0.000000] .text : 0xc0029000 - 0xc03aff24 (3612 kB) [ 0.000000] .data : 0xc03b0000 - 0xc03d8be0 ( 163 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:114 [ 0.000000] Console: colour dummy device 80x30 [ 0.000123] Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776) [ 0.240047] pid_max: default: 32768 minimum: 301 [ 0.240116] Security Framework initialized [ 0.240134] SELinux: Disabled at boot. [ 0.240168] Mount-cache hash table entries: 512 [ 0.240419] Initializing cgroup subsys ns [ 0.240431] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.240444] Initializing cgroup subsys cpuacct [ 0.240456] Initializing cgroup subsys devices [ 0.240464] Initializing cgroup subsys freezer [ 0.240473] Initializing cgroup subsys net_cls [ 0.240522] CPU: Testing write buffer coherency: ok [ 0.241117] devtmpfs: initialized [ 0.242181] regulator: core version 0.5 [ 0.242313] regulator: dummy: [ 0.242431] NET: Registered protocol family 16 [ 0.242835] Kirkwood: MV88F6281-A0, TCLK=200000000. [ 0.242848] Feroceon L2: Cache support initialised. [ 0.243328] initial MPP regs: 01111111 11113322 00001111 00100000 00000000 00000000 00000000 [ 0.243350] final MPP regs: 01111111 11113322 00001111 00000000 00000000 00000000 00000000 [ 0.244992] bio: create slab <bio-0> at 0 [ 0.245299] vgaarb: loaded [ 0.245785] Switching to clocksource orion_clocksource [ 0.256645] NET: Registered protocol family 2 [ 0.256815] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.257403] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.257502] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.257561] TCP: Hash tables configured (established 4096 bind 4096) [ 0.257571] TCP reno registered [ 0.257580] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.257605] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.257802] NET: Registered protocol family 1 [ 0.257833] PCI: CLS 0 bytes, default 32 [ 0.257972] Unpacking initramfs... [ 0.621466] Freeing initrd memory: 4832K [ 0.621480] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.621826] audit: initializing netlink socket (disabled) [ 0.621863] type=2000 audit(0.610:1): initialized [ 0.629384] VFS: Disk quotas dquot_6.5.2 [ 0.629616] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.629722] JFFS2 version 2.2. (NAND) (SUMMARY) c 2001-2006 Red Hat, Inc. [ 0.630456] msgmni has been set to 245 [ 0.631347] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.631361] io scheduler noop registered [ 0.631368] io scheduler deadline registered [ 0.631427] io scheduler cfq registered (default) [ 0.631763] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.652301] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 1.045732] console [ttyS0] enabled [ 1.050053] ONFI flash detected [ 1.053297] ONFI param page 0 valid [ 1.056823] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit) [ 1.065395] Scanning device for bad blocks [ 1.084290] Bad eraseblock 199 at 0x0000018e0000 [ 1.120052] Bad eraseblock 620 at 0x000004d80000 [ 1.157366] Bad eraseblock 1062 at 0x0000084c0000 [ 1.234983] 4 cmdlinepart partitions found on MTD device orion_nand [ 1.241287] Creating 4 MTD partitions on "orion_nand": [ 1.246462] 0x000000000000-0x000000100000 : "u-boot" [ 1.252178] 0x000000100000-0x000000500000 : "uImage" [ 1.257888] 0x000000500000-0x000002500000 : "rootfs" [ 1.263600] 0x000002500000-0x000010000000 : "data" [ 1.269920] mice: PS/2 mouse device common for all mice [ 2.275838] rtc-mv rtc-mv: internal RTC not ticking [ 2.280826] i2c /dev entries driver [ 2.284517] cpuidle: using governor ladder [ 2.288765] cpuidle: using governor menu [ 2.292723] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 2.299131] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 2.335862] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 2.375854] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 2.415854] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 2.455858] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 2.461610] Registered led device: plug:green:health [ 2.462482] TCP cubic registered [ 2.465724] NET: Registered protocol family 17 [ 2.470218] Registering the dns_resolver key type [ 2.474975] Gating clock of unused units [ 2.474982] before: 0x00dfc3fd [ 2.474989] after: 0x00c701d9 [ 2.475345] registered taskstats version 1 [ 2.480175] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.486482] Initalizing network drop monitor service [ 2.491658] Freeing init memory: 132K [ 2.546169] udev[46]: starting version 164 [ 2.876158] MV-643xx 10/100/1000 ethernet driver version 1.4 [ 2.892802] mv643xx_eth smi: probed [ 2.937311] usbcore: registered new interface driver usbfs [ 2.943877] usbcore: registered new interface driver hub [ 2.949465] usbcore: registered new device driver usb [ 2.956202] net eth0: port 0 with MAC address 00:10:75:1a:5a:f9 [ 2.962330] mmc0: mvsdio driver initialized, lacking card detect (fall back to polling) [ 2.991358] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.998431] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 3.003728] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 3.035844] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 3.055848] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 3.061869] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.068707] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.075967] usb usb1: Product: Marvell Orion EHCI [ 3.080692] usb usb1: Manufacturer: Linux 2.6.37-dockstar ehci_hcd [ 3.086909] usb usb1: SerialNumber: orion-ehci.0 [ 3.093467] hub 1-0:1.0: USB hub found [ 3.097272] hub 1-0:1.0: 1 port detected [ 3.415833] usb 1-1: new high speed USB device using orion-ehci and address 2 [ 3.567238] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 3.573967] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.581146] usb 1-1: Product: USB2.0 Hub [ 3.587250] hub 1-1:1.0: USB hub found [ 3.593620] hub 1-1:1.0: 4 ports detected [ 3.876137] usb 1-1.3: new high speed USB device using orion-ehci and address 3 [ 3.988363] usb 1-1.3: New USB device found, idVendor=1b1c, idProduct=0b29 [ 3.995275] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.002627] usb 1-1.3: Product: Voyager Mini [ 4.006940] usb 1-1.3: Manufacturer: Corsair [ 4.011229] usb 1-1.3: SerialNumber: 0000000EC46A21 [ 4.110060] SCSI subsystem initialized [ 4.139175] Initializing USB Mass Storage driver... [ 4.144358] scsi0 : usb-storage 1-1.3:1.0 [ 4.149811] usbcore: registered new interface driver usb-storage [ 4.155874] USB Mass Storage support registered. [ 5.156829] scsi 0:0:0:0: Direct-Access Corsair Voyager Mini 0.00 PQ: 0 ANSI: 2 [ 5.196413] sd 0:0:0:0: [sda] 15806464 512-byte logical blocks: (8.09 GB/7.53 GiB) [ 5.204386] sd 0:0:0:0: [sda] Write Protect is off [ 5.209220] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00 [ 5.209230] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.218635] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.227015] sda: sda1 sda2 [ 5.232006] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.238155] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 13.744382] udev[152]: starting version 164 [ 14.429186] Adding 506040k swap on /dev/sda2. Priority:-1 extents:1 across:506040k [ 19.100408] eth0: link up, 100 Mb/s, full duplex, flow control disabled [ 21.689236] NET: Registered protocol family 10 [ 21.695062] lo: Disabled Privacy Extensions [ 22.002341] sshd (469): /proc/469/oom_adj is deprecated, please use /proc/469/oom_score_adj instead. [ 32.515825] eth0: no IPv6 routers present
Re: new kernel package ready to use January 16, 2011 01:05PM |
Registered: 13 years ago Posts: 5 |
Re: new kernel package ready to use January 16, 2011 04:58PM |
Registered: 14 years ago Posts: 166 |
Re: new kernel package ready to use January 16, 2011 08:16PM |
Registered: 14 years ago Posts: 166 |
Re: new kernel package ready to use January 16, 2011 08:27PM |
Registered: 14 years ago Posts: 166 |
Re: new kernel package ready to use January 16, 2011 08:49PM |
Registered: 14 years ago Posts: 166 |
Linux version 2.6.37-dockstar (root@debian) (gcc version 4.4.5 (Debian 4.4.5-4) ) #6 Mon Jan 17 01:55:44 CET 2011 CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 CPU: VIVT data cache, VIVT instruction cache Machine: Seagate Dockstar Board Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 32768 free_area_init_node: node 0, pgdat c0559fa4, node_mem_map c0588000 Normal zone: 256 pages used for memmap Normal zone: 0 pages reserved Normal zone: 32512 pages, LIFO batch:7 pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext2 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 128MB = 128MB total Memory: 124248k/124248k available, 6824k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0xc8800000 - 0xfe800000 ( 864 MB) lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .init : 0xc0008000 - 0xc0030000 ( 160 kB) .text : 0xc0030000 - 0xc0525000 (5076 kB) .data : 0xc0526000 - 0xc055b680 ( 214 kB) SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:114 Console: colour dummy device 80x30 Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok regulator: core version 0.5 regulator: dummy: NET: Registered protocol family 16 i2c-core: driver [dummy] registered Kirkwood: MV88F6281-A0, TCLK=200000000. Feroceon L2: Cache support initialised. initial MPP regs: 01111111 11113322 00001111 00100000 00000000 00000000 00000000 final MPP regs: 01111111 11113322 00001111 00000000 00000000 00000000 00000000 bio: create slab <bio-0> at 0 vgaarb: loaded i2c-core: driver [88PM860x] registered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Switching to clocksource orion_clocksource FS-Cache: Loaded NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 32 FS-Cache: Netfs 'nfs' registered for caching nfs4filelayout_init: NFSv4 File Layout Driver Registering... Installing knfsd (copyright (C) 1996 okir@monad.swb.de). fuse init (API version 7.15) msgmni has been set to 242 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A console [ttyS0] enabled brd: module loaded loop: module loaded physmap-flash.0: failed to claim resource 0 ONFI flash detected ONFI param page 0 valid NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit) Scanning device for bad blocks Bad eraseblock 873 at 0x000006d20000 4 cmdlinepart partitions found on MTD device orion_nand Creating 4 MTD partitions on "orion_nand": 0x000000000000-0x000000100000 : "u-boot" 0x000000100000-0x000000500000 : "uImage" 0x000000500000-0x000002500000 : "rootfs" 0x000002500000-0x000010000000 : "data" MV-643xx 10/100/1000 ethernet driver version 1.4 mv643xx_eth smi: probed net eth0: port 0 with MAC address 00:10:75:1a:cd:a8 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver orion-ehci orion-ehci.0: Marvell Orion EHCI orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbserial USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core mice: PS/2 mouse device common for all mice i2c /dev entries driver i2c-core: driver [dev_driver] registered lirc_dev: IR Remote Control driver registered, major 253 IR NEC protocol handler initialized IR RC5(x) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR RC5 (streamzap) protocol handler initialized IR LIRC bridge handler initialized Orion Watchdog Timer: Initial timeout 21 sec cpuidle: using governor ladder cpuidle: using governor menu mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman mmc0: mvsdio driver initialized, lacking card detect (fall back to polling) Registered led device: dockstar:green:health Registered led device: dockstar:orange:health Driver for HIFN 795x crypto accelerator chip has been successfully registered. usbcore: registered new interface driver usbhid usbhid: USB HID core driver zram: num_devices not specified. Using default: 1 zram: Creating 1 devices ... oprofile: hardware counters not available oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 17 Gating clock of unused units before: 0x00dfc3fd after: 0x00c701d9 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Waiting 10sec before mounting root device... usb 1-1: new high speed USB device using orion-ehci and address 2 hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 1-1.2: new high speed USB device using orion-ehci and address 3 scsi0 : usb-storage 1-1.2:1.0 scsi 0:0:0:0: Direct-Access Corsair VoyagerGT 1100 PQ: 0 ANSI: 0 CCS sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 3997696 512-byte logical blocks: (2.04 GB/1.90 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sda2 sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] Attached SCSI removable disk VFS: Mounted root (ext2 filesystem) on device 8:1. Freeing init memory: 160K rtc-mv rtc-mv: internal RTC not ticking Adding 203108k swap on /dev/sda2. Priority:-1 extents:1 across:203108k eth0: link up, 1000 Mb/s, full duplex, flow control disabled NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period usb 1-1.1: new high speed USB device using orion-ehci and address 4
Re: new kernel package ready to use January 16, 2011 09:00PM |
Registered: 13 years ago Posts: 26 |
Re: new kernel package ready to use January 17, 2011 02:32AM |
Registered: 13 years ago Posts: 18 |
Machine: Marvell SheevaPlug Reference Board Registered led device: plug:green:healthCould you post your patches on 2.6.37?
Re: new kernel package ready to use January 17, 2011 02:54AM |
Registered: 13 years ago Posts: 18 |
Linux version 2.6.37-dockstar (samson@ubutuvm1004) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #1 Sun Jan 16 00:04:59 HKT 2011 CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 CPU: VIVT data cache, VIVT instruction cache Machine: Seagate FreeAgent DockStar Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 32768 free_area_init_node: node 0, pgdat c03d41ac, node_mem_map c043f000 Normal zone: 256 pages used for memmap Normal zone: 0 pages reserved Normal zone: 32512 pages, LIFO batch:7 pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext2 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 128MB = 128MB total Memory: 120728k/120728k available, 10344k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0xc8800000 - 0xfe800000 ( 864 MB) lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .init : 0xc0008000 - 0xc0029000 ( 132 kB) .text : 0xc0029000 - 0xc03aff24 (3612 kB) .data : 0xc03b0000 - 0xc03d8be0 ( 163 kB) SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:114 Console: colour dummy device 80x30 Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 Initializing cgroup subsys ns ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. Initializing cgroup subsys cpuacct Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: Testing write buffer coherency: ok devtmpfs: initialized regulator: core version 0.5 regulator: dummy: NET: Registered protocol family 16 Kirkwood: MV88F6281-A0, TCLK=200000000. Feroceon L2: Cache support initialised. initial MPP regs: 01111111 11113322 00001111 00100000 00000000 00000000 00000000 final MPP regs: 01111111 11113322 00001111 00000000 00000000 00000000 00000000 bio: create slab <bio-0> at 0 vgaarb: loaded Switching to clocksource orion_clocksource NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 PCI: CLS 0 bytes, default 32 Unpacking initramfs... Freeing initrd memory: 4832K NetWinder Floating Point Emulator V0.97 (double precision) audit: initializing netlink socket (disabled) type=2000 audit(0.610:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFFS2 version 2.2. (NAND) (SUMMARY) c 2001-2006 Red Hat, Inc. msgmni has been set to 245 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A console [ttyS0] enabled ONFI flash detected ONFI param page 0 valid NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit) Scanning device for bad blocks Bad eraseblock 199 at 0x0000018e0000 Bad eraseblock 620 at 0x000004d80000 Bad eraseblock 1062 at 0x0000084c0000 4 cmdlinepart partitions found on MTD device orion_nand Creating 4 MTD partitions on "orion_nand": 0x000000000000-0x000000100000 : "u-boot" 0x000000100000-0x000000500000 : "uImage" 0x000000500000-0x000002500000 : "rootfs" 0x000002500000-0x000010000000 : "data" mice: PS/2 mouse device common for all mice rtc-mv rtc-mv: internal RTC not ticking i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) Registered led device: dockstar:green:health Registered led device: dockstar:orange:misc TCP cubic registered NET: Registered protocol family 17 Registering the dns_resolver key type Gating clock of unused units before: 0x00dfc3fd after: 0x00c701c9 registered taskstats version 1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Initalizing network drop monitor service Freeing init memory: 132K udev[46]: starting version 164 MV-643xx 10/100/1000 ethernet driver version 1.4 mv643xx_eth smi: probed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub net eth0: port 0 with MAC address 00:10:75:1a:5a:f9 usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver orion-ehci orion-ehci.0: Marvell Orion EHCI orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: Marvell Orion EHCI usb usb1: Manufacturer: Linux 2.6.37-dockstar ehci_hcd usb usb1: SerialNumber: orion-ehci.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usb 1-1: new high speed USB device using orion-ehci and address 2 usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-1: Product: USB2.0 Hub hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 1-1.3: new high speed USB device using orion-ehci and address 3 usb 1-1.3: New USB device found, idVendor=1b1c, idProduct=0b29 usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.3: Product: Voyager Mini usb 1-1.3: Manufacturer: Corsair usb 1-1.3: SerialNumber: 0000000EC46A21 SCSI subsystem initialized Initializing USB Mass Storage driver... scsi0 : usb-storage 1-1.3:1.0 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. scsi 0:0:0:0: Direct-Access Corsair Voyager Mini 0.00 PQ: 0 ANSI: 2 sd 0:0:0:0: [sda] 15806464 512-byte logical blocks: (8.09 GB/7.53 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00 sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sda2 sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] Attached SCSI removable disk udev[151]: starting version 164 Adding 506040k swap on /dev/sda2. Priority:-1 extents:1 across:506040k eth0: link up, 100 Mb/s, full duplex, flow control disabled NET: Registered protocol family 10 lo: Disabled Privacy Extensions sshd (467): /proc/467/oom_adj is deprecated, please use /proc/467/oom_score_adj instead. eth0: no IPv6 routers present
Re: new kernel package ready to use January 17, 2011 07:19AM |
Registered: 14 years ago Posts: 166 |
Re: new kernel package ready to use January 17, 2011 08:22AM |
Registered: 13 years ago Posts: 5 |