Re: Dell Appliance June 15, 2018 01:53PM |
Registered: 10 years ago Posts: 226 |
Re: Dell Appliance June 15, 2018 10:04PM |
Registered: 9 years ago Posts: 429 |
Re: Dell Appliance June 15, 2018 10:32PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Dell Appliance June 15, 2018 10:45PM |
Registered: 10 years ago Posts: 226 |
Re: Dell Appliance June 15, 2018 11:00PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Dell Appliance June 16, 2018 04:37PM |
Admin Registered: 13 years ago Posts: 18,821 |
./kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb
./kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa325.mtd0.kwb -p
Re: Dell Appliance June 16, 2018 07:32PM |
Registered: 10 years ago Posts: 226 |
Re: Dell Appliance June 16, 2018 07:54PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Dell Appliance June 17, 2018 03:04AM |
Registered: 10 years ago Posts: 226 |
root@jt-ubuntu:/home/jt# ./kwboot -B 115200 -b gdrv/uboot.2017.07-tld-1.nsa325.mtd0.kwb -t /dev/ttyUSB0 Sending boot message. Please reboot the target...- Sending boot image... 0 % [+xmodem: Protocol error
root@jt-ubuntu:/home/jt# ./kwboot -B 115200 -b gdrv/uboot.2017.07-tld-1.nsa325.mtd0.kwb -t -p /dev/ttyUSB0 Sending boot message. Please reboot the target.../ Sending boot image... 0 % [......................................................................] 1 % [......................................................................] 3 % [......................................................................] 5 % [......................................................................] 6 % [......................................................................] 8 % [......................................................................] 10 % [......................................................................] 11 % [......................................................................] 13 % [......................................................................] 15 % [......................................................................] 17 % [......................................................................] 18 % [......................................................................] 20 % [......................................................................] 22 % [......................................................................] 23 % [......................................................................] 25 % [......................................................................] 27 % [......................................................................] 29 % [......................................................................] 30 % [......................................................................] 32 % [......................................................................] 34 % [......................................................................] 35 % [......................................................................] 37 % [......................................................................] 39 % [......................................................................] 41 % [......................................................................] 42 % [......................................................................] 44 % [......................................................................] 46 % [......................................................................] 47 % [......................................................................] 49 % [......................................................................] 51 % [......................................................................] 53 % [......................................................................] 54 % [......................................................................] 56 % [......................................................................] 58 % [......................................................................] 59 % [......................................................................] 61 % [......................................................................] 63 % [......................................................................] 64 % [......................................................................] 66 % [......................................................................] 68 % [......................................................................] 70 % [......................................................................] 71 % [......................................................................] 73 % [......................................................................] 75 % [......................................................................] 76 % [......................................................................] 78 % [......................................................................] 80 % [......................................................................] 82 % [......................................................................] 83 % [......................................................................] 85 % [......................................................................] 87 % [......................................................................] 88 % [......................................................................] 90 % [......................................................................] 92 % [......................................................................] 94 % [......................................................................] 95 % [......................................................................] 97 % [......................................................................] 99 % [....................................] [Type Ctrl-\ + c to quit]It doesn't boot, but it looks like the transfer was successful.
><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>< M300 dellkaceM300 To manage this appliance, please view the web interface at: http://192.168.2.100 See the documentation for additional information Copyright © 2010-2018 Dell ><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>< dellkaceM300 login: root Password: Last login: Sun Jun 17 17:11:06 UTC 2018 on ttyS0 Linux dellkaceM300 2.6.31.8-kacemini-1.7 #1 Thu Apr 21 06:52:17 PDT 2011 armv5tel The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@dellkaceM300:~# dmesg Linux version 2.6.31.8-kacemini-1.7 (lewinski@armcross) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Thu Apr 21 06:52:17 PDT 2011 CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 CPU: VIVT data cache, VIVT instruction cache Machine: Feroceon-KW Using UBoot passing parameters structure Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 524288 free_area_init_node: node 0, pgdat 404895a4, node_mem_map 4134b000 Normal zone: 4096 pages used for memmap Normal zone: 0 pages reserved Normal zone: 520192 pages, LIFO batch:31 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520192 Kernel command line: console=ttyS0,115200 mtdparts=spi_flash:0x7f000@0(uboot),0x1000@0x7f000(u-boot-env) PID hash table entries: 4096 (order: 12, 16384 bytes) Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Memory: 512MB 512MB 512MB 512MB = 2048MB total Memory: 2071808KB available (4220K code, 266K data, 136K init, 0K highmem) NR_IRQS:128 Console: colour dummy device 80x30 Calibrating delay loop... 1998.84 BogoMIPS (lpj=9994240) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok xor: measuring software checksum speed arm4regs : 1819.600 MB/sec 8regs : 1379.600 MB/sec 32regs : 1547.200 MB/sec xor: using function: arm4regs (1819.600 MB/sec) NET: Registered protocol family 16 Feroceon L2: Enabling L2 Feroceon L2: Cache support initialised. CPU Interface ------------- SDRAM_CS0 ....base 00000000, size 512MB SDRAM_CS1 ....base 20000000, size 512MB SDRAM_CS2 ....base 40000000, size 512MB SDRAM_CS3 ....base 60000000, size 512MB PEX0_MEM ....base e8000000, size 128MB PEX0_IO ....base f2000000, size 1MB INTER_REGS ....base f1000000, size 1MB NFLASH_CS ....base fa000000, size 2MB SPI_CS ....base f4000000, size 16MB BOOT_ROM_CS ....no such DEV_BOOTCS ....no such CRYPT_ENG ....base f0000000, size 2MB Marvell Development Board (LSP Version KW_LSP_5.0.3)-- DB-88F6282A-BP Soc: MV88F1155 Rev 1 LE Detected Tclk 200000000 and SysClk 500000000 MV Buttons Device Load Marvell USB EHCI Host controller #0: bf833500 PEX0 interface detected no Link. PCI: bus0: Fast back to back transfers enabled bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb raid6: int32x1 142 MB/s raid6: int32x2 178 MB/s raid6: int32x4 208 MB/s raid6: int32x8 163 MB/s raid6: using algorithm int32x4 (208 MB/s) NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 2344K rtc mv_rtc: rtc core: registered kw-rtc as rtc0 RTC registered cpufreq: Init kirkwood cpufreq driver Kirkwood hwmon thermal sensor initialized. XOR registered 4 channels XOR 2nd invalidate WA enabled cesadev_init(4000eec4) MV Buttons Driver Load NTFS driver 2.1.29 [Flags: R/O]. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. msgmni has been set to 4051 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for stdrng (krng) async_tx: api initialized (sync-only) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A console [ttyS0] enabled brd: module loaded loop: module loaded Integrated Sata device found IRQ 21/mvSata: IRQF_DISABLED is not guaranteed on shared IRQs scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter scsi 0:0:0:0: Direct-Access ATA TS16GSSD25H-M 2010 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 Loading Marvell Ethernet Driver: o Cached descriptors in DRAM o DRAM SW cache-coherency o 2 Giga ports supported o Multi RX Queue support - 4 RX queues o Multi TX Queue support - 2 TX Queues o TCP segmentation offload (TSO) supported o Large Receive offload (LRO) supported o Receive checksum offload supported o Transmit checksum offload supported o Network Fast Processing (Routing) supported - (Disabled) o Driver ERROR statistics enabled o Driver INFO statistics enabled o Proc tool API enabled o SKB Reuse supported - (Disabled) o SKB Recycle supported - (Disabled) o Rx descripors: q0=128 q1=128 q2=128 q3=128 o Tx descripors: q0=532 q1=532 o Loading network interface(s): o register under mv88fx_eth platform o eth0, ifindex = 2, GbE port = 0 Warning: Giga 1 is Powered Off mvFpRuleDb (bef00000): 65536 entries, 262144 bytes tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. sd 0:0:0:0: [sda] 31277056 512-byte logical blocks: (16.0 GB/14.9 GiB) sd 0:0:0:0: [sda] 0-byte physical blocks SPI Serial flash detected @ 0xf4000000, 512KB (128sec x 4KB) 2 cmdlinepart partitions found on MTD device spi_flash Creating 2 MTD partitions on "spi_flash": 0x000000000000-0x00000007f000 : "uboot" 0x00000007f000-0x000000080000 : "u-boot-env" ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_marvell ehci_marvell.70059: Marvell Orion EHCI ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. sda: sda1 sda2 sda3 < sda5 > sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 sd 0:0:0:0: [sda] Attached SCSI disk ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat mice: PS/2 mouse device common for all mice input: gpio-keys as /devices/platform/gpio-keys/input/input0 i2c /dev entries driver md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman mmc0: mvsdio driver initialized, lacking card detect (fall back to polling) Registered led device: white Registered led device: orange TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. rtc mv_rtc: setting system clock to 2018-06-17 17:10:03 UTC (1529255403) Freeing init memory: 136K usb 1-1: new high speed USB device using ehci_marvell and address 2 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. udev[195]: starting version 164 Adding 203752k swap on /dev/sda5. Priority:-1 extents:1 across:203752k EXT3 FS on sda2, internal journal eth0: started root@dellkaceM300:~#
Re: Dell Appliance June 17, 2018 03:28AM |
Admin Registered: 13 years ago Posts: 18,821 |
root@jt-ubuntu:/home/jt# ./kwboot > -B 115200 -b > gdrv/uboot.2017.07-tld-1.nsa325.mtd0.kwb -t -p > /dev/ttyUSB0 > Sending boot message. Please reboot the > target.../ > Sending boot image... > 0 % > [......................................................................] > 1 % > [......................................................................] > 3 % > [......................................................................] > 5 % > [......................................................................] <snip> > 95 % > [......................................................................] > 97 % > [......................................................................] > 99 % [....................................] > [Type Ctrl-\ + c to quit]> It doesn't boot, but it looks like the transfer
Re: Dell Appliance June 24, 2018 03:20AM |
Admin Registered: 13 years ago Posts: 18,821 |
><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>< M300 dellkaceM300 To manage this appliance, please view the web interface at: http://192.168.2.100 See the documentation for additional information Copyright © 2010-2018 Dell ><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>< dellkaceM300 login:
Re: Dell Appliance June 24, 2018 04:21AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Dell Appliance June 24, 2018 01:45PM |
Registered: 10 years ago Posts: 226 |
> ><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>< > M300 > dellkaceM300 > > To manage this appliance, please view the web > interface at: > http://192.168.2.100 > > > See the documentation for additional information > > Copyright © 2010-2018 > Dell > ><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>< > dellkaceM300 login: >>
Re: Dell Appliance June 24, 2018 04:48PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Dell Appliance June 24, 2018 06:29PM |
Admin Registered: 13 years ago Posts: 18,821 |
Debian GNU/Linux 9 M300 ttyS0 M300 login: root Password: Last login: Wed Dec 31 16:01:32 PST 1969 from 192.168.0.220 on pts/0 Linux M300 4.12.1-kirkwood-tld-1 #1 PREEMPT Sat Jul 15 21:40:50 PDT 2017 armv5tel The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@M300:~# myinfo M300 Dell Kace M300 Linux version 4.12.1-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Sat Jul 15 21:40:50 PDT 2017 root@M300:~# date Mon Jun 25 02:29:51 PDT 2018 root@M300:~# cat /proc/cpuinfo processor : 0 model name : Feroceon 88FR131 rev 1 (v5l) BogoMIPS : 400.00 Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE CPU variant : 0x2 CPU part : 0x131 CPU revision : 1 Hardware : Marvell Kirkwood (Flattened Device Tree) Revision : 0000 Serial : 0000000000000000 root@M300:~#
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.12.1-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Sat Jul 15 21:40:50 PDT 2017 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Dell Kace M300
root@M300:~# cat /proc/device-tree/compatible dell,m300marvell,kirkwood-88f6282marvell,kirkwood root@M300:~# cat /proc/device-tree/model Dell Kace M300 root@M300:~#
root@M300:~# uptime 02:37:30 up 11 min, 1 user, load average: 0.00, 0.00, 0.00
[ 5.148226] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 5.159007] ata1.00: ATA-7: TS16GSSD25H-M, 20100712, max UDMA/133 [ 5.165127] ata1.00: 31277056 sectors, multi 0: LBA48 [ 5.176963] ata1.00: configured for UDMA/133 [ 5.191711] scsi 0:0:0:0: Direct-Access ATA TS16GSSD25H-M 0712 PQ: 0 ANSI: 5 [ 5.200744] sd 0:0:0:0: [sda] 31277056 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 5.208918] sd 0:0:0:0: [sda] Write Protect is off [ 5.213760] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.213846] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.224795] sda: sda1 sda2 sda3 < sda5 > [ 5.230299] sd 0:0:0:0: [sda] Attached SCSI disk
Re: Dell Appliance June 25, 2018 01:57AM |
Registered: 10 years ago Posts: 226 |
Re: Dell Appliance June 25, 2018 02:11AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Dell Appliance June 25, 2018 02:30AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Dell Appliance June 25, 2018 04:29AM |
Admin Registered: 13 years ago Posts: 18,821 |
Bank # 1: Flash Base Address : 0xf8000000 Flash Model : MXIC MX25L4005 Manufacturer ID : 0xc2 Device Id : 0x2013 Sector Size : 4K Number of sectors : 128 Page Size : 256 Write Protection : Upper 1 of 2
Re: Dell Appliance June 25, 2018 08:03PM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
4. Create uImage with embedded DTB for booting with older u-boots (2012 or earlier). Skip this step if you have installed the latest U-Boot for Kirkwood (or are installing this u-boot at the same time).
Please replace kirkwood-goflexnet.dtb below with the correct DTB name for your box (see the folder /media/sdb1/boot/dts for the exact spelling of your Kirkwood box name).
Generate the uImage with DTB embedded inside:
cd /media/sdb1/boot
cp -a zImage-4.12.1-kirkwood-tld-1 zImage.fdt
cat dts/kirkwood-m300.dtb >> zImage.fdt
mv uImage uImage.orig
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-4.12.1-kirkwood-tld-1 -d zImage.fdt uImage
sync
setenv mtdparts 'mtdparts=spi0.0:0x7f000@0(uboot),0x1000@0x7f000(u-boot-env)' setenv set_bootargs_usb 'setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $(mtdparts) earlyprintk=serial' usb start ext2load usb 0:1 0x800000 /boot/uImage ext2load usb 0:1 0x02100000 /boot/uInitrd run set_bootargs_usb bootm 0x800000 0x02100000
# Dell KACE M300 # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd1 0x0 00001000 0x00001000
Re: Dell Appliance June 27, 2018 01:36AM |
Registered: 6 years ago Posts: 15 |
Re: Dell Appliance June 27, 2018 03:34AM |
Admin Registered: 13 years ago Posts: 18,821 |
M300 192.168.0.249 Dell KACE M300 Linux version 4.17.2-kirkwood-tld-2 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Sun Jun 24 23:23:16 PDT 2018 Debian 9.3 console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x7f000@0(uboot),0x1000@0x7f000(u-boot-env) earlyprintk=serial
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) udev on /dev type devtmpfs (rw,nosuid,relatime,size=1029180k,nr_inodes=186911,mode=755) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=206752k,mode=755) /dev/sdb1 on / type ext3 (rw,noatime,errors=remount-ro) tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k) tmpfs on /run/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,size=413500k) tmpfs on /tmp type tmpfs (rw,relatime) rpc_pipefs on /run/rpc_pipefs type rpc_pipefs (rw,relatime) fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime) /etc/auto.nfs on /mnt/nfs type autofs (rw,relatime,fd=6,pgrp=1705,timeout=300,minproto=5,maxproto=5,indirect) nfsd on /proc/fs/nfsd type nfsd (rw,relatime) tmpfs on /var/log type tmpfs (rw,relatime) /dev/sda1 on /media/boot type ext2 (rw,noatime,errors=continue) /dev/sda2 on /media/root type ext3 (rw,noatime)
01:06:52 up 8:37, 1 user, load average: 0.01, 0.02, 0.00
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.17.2-kirkwood-tld-2 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Sun Jun 24 23:23:16 PDT 2018 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Dell KACE M300 [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 524288 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] random: get_random_bytes called from start_kernel+0x7c/0x4f0 with crng_init=0 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:0x7f000@0(uboot),0x1000@0x7f000(u-boot-env) earlyprintk=serial [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2058364K/2097152K available (8192K kernel code, 804K rwdata, 2124K rodata, 1024K init, 289K bss, 38788K reserved, 0K cma-reserved, 1310720K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0x(ptrval) - 0x(ptrval) (9184 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) ( 805 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 290 kB)
Re: Dell Appliance June 27, 2018 04:09AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Dell Appliance June 27, 2018 12:05PM |
Registered: 6 years ago Posts: 15 |
Re: Dell Appliance June 27, 2018 02:15PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Dell Appliance June 27, 2018 04:09PM |
Registered: 6 years ago Posts: 15 |
private function _led($args) { $this->_ledstatus($args); } private function _ledstatus($args) { echo PlatformUtility::LEDStatus(); } private function _ledon($args) { echo PlatformUtility::LEDOff(); echo PlatformUtility::LEDControl('on',true); } private function _ledtest($args) { echo "Begin LED Test Cycle\n"; echo "LEDOff() for 2 secs\n"; PlatformUtility::LEDOff(); sleep(2); foreach(array(true, false) as $white) { foreach(array('on','off','blink') as $on) { if(!$white) $label = 'orange'; else $label = 'white'; echo "LEDControl($on, $label) for 4 secs\n"; PlatformUtility::LEDControl($on, $white); sleep(4); echo "LEDOff() for 2 secs\n"; PlatformUtility::LEDOff(); sleep(2); } } // set the white led back on echo "turning white led ON\n"; echo PlatformUtility::LEDOff(); echo PlatformUtility::LEDControl('on',true); }
Re: Dell Appliance June 27, 2018 10:19PM |
Registered: 10 years ago Posts: 226 |
Re: Dell Appliance June 28, 2018 12:20AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Dell Appliance June 28, 2018 12:21AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Dell Appliance June 28, 2018 01:14AM |
Admin Registered: 13 years ago Posts: 18,821 |
> private function _led($args) { > $this->_ledstatus($args); > } > > private function _ledstatus($args) { > echo PlatformUtility::LEDStatus(); > } > > private function _ledon($args) { > echo PlatformUtility::LEDOff(); > echo > PlatformUtility::LEDControl('on',true); > } > > private function _ledtest($args) { > echo "Begin LED Test Cycle\n"; > echo "LEDOff() for 2 secs\n"; > PlatformUtility::LEDOff(); > sleep(2); > foreach(array(true, false) as $white) { > foreach(array('on','off','blink') as > $on) { > if(!$white) > $label = 'orange'; > else > $label = 'white'; > echo "LEDControl($on, $label) for > 4 secs\n"; > PlatformUtility::LEDControl($on, > $white); > sleep(4); > echo "LEDOff() for 2 secs\n"; > PlatformUtility::LEDOff(); > sleep(2); > } > } > // set the white led back on > echo "turning white led ON\n"; > echo PlatformUtility::LEDOff(); > echo > PlatformUtility::LEDControl('on',true); > } >