Ron Nelson
Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 June 22, 2018 05:53PM |
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 June 22, 2018 06:53PM |
Admin Registered: 13 years ago Posts: 18,575 |
Quote
Updated 24 Jul 2017:
Basic Debian stretch Kirkwood rootfs for most Kirwood plugs:
- tarball size: 188M
- install size: 488M
- The init system used in this rootfs is sysvinit . To boot with systemd, see note 2 below.
- Installed packages: nano, avahi, ntp, busybox-syslogd (log to RAM), htop, isc-dhcp-client, dialog, bzip2, nfs server/client, iperf, ethtool, sysvinit-core, sysvinit, and sysvinit-utils.
- see LED controls in /etc/rc.local, and /etc/init.d/halt
- see some useful aliases in /root/.profile
- root password: root
Download at Dropbox:
Debian-4.12.1-kirkwood-tld-1-rootfs-bodhi.tar.bz2
md5:
bf3d29569943875df348fb5ca03b348c
sha256:
4ed5714fdb123cdb40e973f3d0754e91cd199b75a9874018f2b5dc9cfa8ae8bb
Ron Nelson
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 June 23, 2018 03:11PM |
Ron Nelson
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 June 23, 2018 03:48PM |
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 June 23, 2018 05:03PM |
Admin Registered: 13 years ago Posts: 18,575 |
Quote
However, for this EA4500 box, I only have the kernel and rootfs released: Debian-4.12.1-kirkwood-tld-1-rootfs-bodhi.tar.bz2.
https://forum.doozan.com/read.php?2,12096
Quote
Serial Console & JTAG console
Repair Pogo E02 with Raspberry PI (JTAG) and OpenOCD
Serial Port connector - what are people using to make it work
Serial Console hookup - GoFlex Net (external link)
Serial Console hookup - Pogoplug E02 and Pogoplug Pro V3 (external link)
OSX Serial/Net Console
Use Phone Jack - Phone Jack Serial Console Pics
Adding serial connector to Pogoplug Mobile (external link)
WD Mycloud EX2100/4100 Serial Console pic1, also pic2, pic3
Dreamplug Serial Console
How to unbrick your box using serial console with kwboot
Ron Nelson
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 June 23, 2018 07:06PM |
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 June 23, 2018 07:50PM |
Admin Registered: 13 years ago Posts: 18,575 |
Quote
Molex 5268-04a(2.5mm pitch) is mounted on the PCB.
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 June 23, 2018 07:58PM |
Admin Registered: 13 years ago Posts: 18,575 |
Ron Nelson
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 June 24, 2018 04:14PM |
Hit any key to stop autoboot: 0 Viper>> setenv bootargs_usb 'console=ttyS0,115200 root=LABEL=rootfs rootdelay=10' Viper>> setenv load_usb 'usb start; ext2load usb 0:1 0x800000 /boot/uImage; ext2load usb 0:1 0x1100000 /boot/uInitrd' Viper>> setenv bootcmd_usb 'setenv bootargs $(bootargs_usb); run load_usb; bootm 0x800000 0x1100000' Viper>> setenv bootcmd 'run bootcmd_usb' Viper>> boot (Re)start USB... USB: scanning bus for devices... 2 USB Device(s) found Waiting for storage device(s) to settle before scanning... 1 Storage Device(s) found Failed to mount ext2 filesystem... ** Bad ext2 partition or disk - usb 0:1 ** Failed to mount ext2 filesystem... ** Bad ext2 partition or disk - usb 0:1 ** ## Booting image at 00800000 ... Bad Magic Number Viper>>I'm using a GPT partition label. Should I have used msdos instead?
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 June 24, 2018 04:51PM |
Admin Registered: 13 years ago Posts: 18,575 |
Ron Nelson
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 06, 2018 04:48PM |
__ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** WNC BOARD: Viper R2.2 LE ** ** For Development Only. Not For Demo ** U-Boot 1.1.4 (Sep 15 2011 - 15:46:36) Marvell version: 3.5.9 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFB20 Soc: 88F6282 A1CPU running @ 1200Mhz L2 running @ 400Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM (DDR2) CAS Latency = 6 tRP = 6 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 128MB DRAM Total size 128MB 16bit width Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:128 MB Flash: 0 kB CPU : Marvell Feroceon (Rev 1) u_env Offset: 00080000 s_env Offset: 000a0000 Streaming disabled Write allocate disabled Module 0 is RGMII USB 0: host mode PEX 0: PCI Express Root Complex Interface PEX interface detected Link X1 PEX 1: PCI Express Root Complex Interface PEX interface detected Link X1 Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 0 Viper>> setenv bootargs_usb 'console=ttyS0,115200 root=LABEL=rootfs rootdelay=10' Viper>> setenv load_usb 'usb start; ext2load usb 0:1 0x800000 /boot/uImage; ext2load usb 0:1 0x1100000 /boot/uInitrd' Viper>> setenv bootcmd_usb 'setenv bootargs $(bootargs_usb); run load_usb; bootm 0x800000 0x1100000' Viper>> setenv auto_recovery no Viper>> saveenv Saving Environment to NAND... Erasing Nand...offset 0x80000... Writing to Nand... done Viper>> run bootcmd_usb (Re)start USB... USB: scanning bus for devices... 2 USB Device(s) found Waiting for storage device(s) to settle before scanning... 1 Storage Device(s) found .... . ...... ............ ......................... ................................................... ...................................................................................................... ......................................................................................................................................................................... 3834397 bytes read .... . ...... ............ ......................... ................................................... ...................................................................................................... ................................................................................................................................................................................................................. ..................................................................................................................................................................................................................................................................................................... 7245696 bytes read ## Booting image at 00800000 ... Image Name: Linux-4.12.1-kirkwood-tld-1 Created: 2018-07-06 21:30:30 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3834333 Bytes = 3.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 01100000 ... Image Name: initramfs-4.12.1-kirkwood-tld-1 Created: 2017-07-24 0:18:23 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7245632 Bytes = 6.9 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel.each time something like this happens, I reformat and try again, but something always goes wrong. I have tried multiple flash drives. One time It went correctly, and I got into debian. However, the ethernet port wasn't connected, so I plugged it in and rebooted, only to get bad CRC errors on reboot. When I plugged the flash drive into my rPi, I ran fsck and it found a zillion error on the disk. When it was finished with it, there were barely any files left. I'm out of ideas.
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 06, 2018 06:09PM |
Admin Registered: 13 years ago Posts: 18,575 |
setenv bootargs_usb 'console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial' setenv load_usb 'usb start; ext2load usb 0:1 0x800000 /boot/uImage; ext2load usb 0:1 0x02100000 /boot/uInitrd' setenv bootcmd_usb 'setenv bootargs $(bootargs_usb); run load_usb; bootm 0x800000 0x02100000'
Ron Nelson
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 06, 2018 06:58PM |
[ 7.466801] 9 ofpart partitions found on MTD device orion_nand [ 7.472680] Creating 9 MTD partitions on "orion_nand": [ 7.477844] 0x000000000000-0x000000080000 : "u-boot" [ 7.484110] 0x000000080000-0x0000000a0000 : "u_env" [ 7.490226] 0x0000000a0000-0x0000000c0000 : "s_env" [ 7.496437] 0x000000200000-0x0000004a0000 : "kernel" [ 7.502760] 0x0000004a0000-0x000001c00000 : "rootfs" [ 7.509172] 0x000001c00000-0x000001ea0000 : "alt_kernel" [ 7.515662] 0x000001ea0000-0x000003600000 : "alt_rootfs" [ 7.522325] 0x000003600000-0x000008000000 : "syscfg" [ 7.528963] 0x0000000c0000-0x000000200000 : "unused" [ 7.536339] libphy: Fixed MDIO Bus: probed [ 7.541374] libphy: orion_mdio_bus: probed [ 7.545772] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 7.553751] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 48:f8:b3:99:29:7e [ 7.562661] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.569233] ehci-pci: EHCI PCI platform driver [ 7.573790] ehci-orion: EHCI orion driver [ 7.578011] orion-ehci f1050000.ehci: EHCI Host Controller [ 7.583584] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 7.591552] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 7.620455] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 7.626728] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.633582] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.640854] usb usb1: Product: EHCI Host Controller [ 7.645753] usb usb1: Manufacturer: Linux 4.12.1-kirkwood-tld-1 ehci_hcd [ 7.652504] usb usb1: SerialNumber: f1050000.ehci [ 7.657974] hub 1-0:1.0: USB hub found [ 7.661840] hub 1-0:1.0: 1 port detected [ 7.666374] usbcore: registered new interface driver usb-storage [ 7.672786] mousedev: PS/2 mouse device common for all mice [ 7.678666] i2c /dev entries driver [ 7.683489] hidraw: raw HID events driver (C) Jiri Kosina [ 7.689258] drop_monitor: Initializing network drop monitor service [ 7.695861] NET: Registered protocol family 17 [ 7.700472] Key type dns_resolver registered [ 7.705507] registered taskstats version 1 [ 7.709624] Loading compiled-in X.509 certificates [ 7.714525] zswap: loaded using pool lzo/zbud [ 7.728653] Key type big_key registered [ 7.741843] Key type encrypted registered [ 7.747283] hctosys: unable to open rtc device (rtc0) [ 7.755795] Freeing unused kernel memory: 1024K Loading, please wait... starting version 232 [ 8.020508] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 8.254009] mv88e6085 f1072004.mdio-bus-mii:10: switch 0x171 detected: Marvell 88E6171, revision 2 [ 8.272706] usb 1-1: New USB device found, idVendor=090c, idProduct=1000 [ 8.272716] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.272722] usb 1-1: Product: USB DISK [ 8.272727] usb 1-1: Manufacturer: SMI Corporation [ 8.273527] usb-storage 1-1:1.0: USB Mass Storage device detected [ 8.280634] scsi host0: usb-storage 1-1:1.0 [ 8.587139] usbcore: registered new interface driver uas [ 8.683836] libphy: mv88e6xxx SMI: probed [ 8.687935] DSA: switch 0 0 parsed [ 8.691378] DSA: tree 0 parsed [ 9.588046] Generic PHY mv88e6xxx-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:00, irq=-1) [ 9.610666] Generic PHY mv88e6xxx-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:01, irq=-1) [ 9.633191] Generic PHY mv88e6xxx-0:02: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:02, irq=-1) [ 9.655723] Generic PHY mv88e6xxx-0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:03, irq=-1) [ 9.678252] Generic PHY mv88e6xxx-0:04: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:04, irq=-1) Begin: Loading essential drivers ... done. [ 10.045558] scsi 0:0:0:0: Direct-Access SMI USB DISK 1100 PQ: 0 ANSI: 0 CCS [ 10.059879] sd 0:0:0:0: [sda] 7886848 512-byte logical blocks: (4.04 GB/3.76 GiB) [ 10.074881] sd 0:0:0:0: [sda] Write Protect is off [ 10.083355] sd 0:0:0:0: [sda] No Caching mode page found [ 10.088745] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 10.109125] random: crng init done [ 10.112721] sda: sda1 [ 10.121752] sd 0:0:0:0: [sda] Attached SCSI removable disk Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Warning: fsck not present, so skipping root file system [ 19.833892] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 19.854871] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [ ok ] Setting hostname to 'debian'...done. [....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232 . ok [ 22.052225] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ ok done. [....] Waiting for /dev to be fully populated...[ 22.328783] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 22.430998] orion_wdt: Initial timeout 21 sec [ 22.520820] marvell-cesa f1030000.crypto: CESA device successfully registered [ 22.753762] Marvell TOPDOG(R) 802.11 Wireless Network Driver version 0.13 [ 22.781137] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 22.890199] mwl8k 0000:01:00.0: Direct firmware load for mwl8k/helper_8366.fw failed with error -2 [ 22.906407] 0000:01:00.0: Error requesting helper fw mwl8k/helper_8366.fw [ 22.920628] mwl8k 0000:02:00.0: Direct firmware load for mwl8k/helper_8366.fw failed with error -2 [ 22.937362] 0000:02:00.0: Error requesting helper fw mwl8k/helper_8366.fw done. [ ok ] Activating swap:. [ 23.946417] EXT4-fs (sda1): re-mounted. Opts: (null) [....] Will now check root file system:fsck from util-linux 2.29.2 [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -y -C0 /dev/sda1 e2fsck 1.43.4 (31-Jan-2017) rootfs: clean, 14458/246512 files, 156085/985600 blocks . ok [ 24.225659] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ ok ] Will now activate lvm and md swap:done. [info] Will now check all file systems. fsck from util-linux 2.29.2 Checking all file systems. LABEL=rootfs is mounted [....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs[ ok hat location is writable.. [ ok ] Cleaning up temporary files...[....] Cleaning /tmp...done. [ ok . [ ok ] Will now mount local filesystems:. [ ok ] Will now activate swapfile swap:done. [ ok ] Checking minimum space in /tmp...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables...done. [ ok ] Initializing random number generator...done. [ 27.032668] mv643xx_eth: no PHY [ 27.032711] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5 Copyright 2004-2016 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/48:f8:b3:99:29:7e Sending on LPF/eth0/48:f8:b3:99:29:7e Sending on Socket/fallback DHCPREQUEST of 192.168.0.14 on eth0 to 255.255.255.255 port 67 [ 107.768334] NET: Registered protocol family 10 [ 107.776275] Segment Routing with IPv6 DHCPREQUEST of 192.168.0.14 on eth0 to 255.255.255.255 port 67 DHCPREQUEST of 192.168.0.14 on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 No DHCPOFFERS received. Trying recorded lease 192.168.0.14 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. --- 192.168.0.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms No working leases in persistent database - sleeping. done. [ ok ] Starting RPC port mapper daemon: rpcbind. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1360 (syslogd) . ok [ ok ] Starting system message bus: dbus. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [ ok ] Starting NTP server: ntpd. [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1363 (klogd) . ok [ ok ] Starting OpenBSD Secure Shell server: sshd. [ ok ] Running local boot scripts (/etc/rc.local). Debian GNU/Linux 9 debian ttyS0 debian login:
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 06, 2018 08:59PM |
Admin Registered: 13 years ago Posts: 18,575 |
[ 8.687935] DSA: switch 0 0 parsed [ 8.691378] DSA: tree 0 parsed [ 9.588046] Generic PHY mv88e6xxx-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:00, irq=-1) [ 9.610666] Generic PHY mv88e6xxx-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:01, irq=-1) [ 9.633191] Generic PHY mv88e6xxx-0:02: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:02, irq=-1) [ 9.655723] Generic PHY mv88e6xxx-0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:03, irq=-1) [ 9.678252] Generic PHY mv88e6xxx-0:04: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:04, irq=-1)And the link was up
[ 27.032711] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
Ron Nelson
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 07, 2018 03:17PM |
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.12.1-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Sat Jul 15 21:40:50 PDT 2017 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Linksys Viper (E4200v2 / EA4500) [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c0d9e084, node_mem_map c7ef9000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 108948K/131072K available (8192K kernel code, 716K rwdata, 1972K rodata, 1024K init, 288K bss, 22124K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc0900000 (9184 kB) .init : 0xc0c00000 - 0xc0d00000 (1024 kB) .data : 0xc0d00000 - 0xc0db3274 ( 717 kB) .bss : 0xc0db9b9c - 0xc0e01e60 ( 289 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000007] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.007906] Switching to timer-based delay loop, resolution 5ns [ 0.014323] Console: colour dummy device 80x30 [ 0.018903] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000) [ 0.029513] pid_max: default: 32768 minimum: 301 [ 0.034378] Security Framework initialized [ 0.038700] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.045379] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.053336] CPU: Testing write buffer coherency: ok [ 0.059285] Setting up static identity map for 0x100000 - 0x100058 [ 0.065776] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1 [ 0.074108] devtmpfs: initialized [ 0.082191] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.092153] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.098728] prandom: seed boundary self test passed [ 0.107391] prandom: 100 self tests passed [ 0.111607] pinctrl core: initialized pinctrl subsystem [ 0.118064] NET: Registered protocol family 16 [ 0.122996] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.131506] cpuidle: using governor ladder [ 0.135734] cpuidle: using governor menu [ 0.140170] Feroceon L2: Enabling L2 [ 0.143844] Feroceon L2: Cache support initialised. [ 0.149179] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set [ 0.164147] No ATAGs? [ 0.173351] vgaarb: loaded [ 0.178835] SCSI subsystem initialized [ 0.182824] libata version 3.00 loaded. [ 0.183109] usbcore: registered new interface driver usbfs [ 0.188773] usbcore: registered new interface driver hub [ 0.194219] usbcore: registered new device driver usb [ 0.200437] clocksource: Switched to clocksource orion_clocksource [ 0.295667] VFS: Disk quotas dquot_6.6.0 [ 0.299730] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.317333] NET: Registered protocol family 2 [ 0.322542] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.329574] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.336027] TCP: Hash tables configured (established 1024 bind 1024) [ 0.342533] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.348437] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.354946] NET: Registered protocol family 1 [ 0.359778] RPC: Registered named UNIX socket transport module. [ 0.365826] RPC: Registered udp transport module. [ 0.370624] RPC: Registered tcp transport module. [ 0.375394] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.381907] PCI: CLS 0 bytes, default 32 [ 0.382136] Unpacking initramfs... [ 1.067757] Freeing initrd memory: 7544K [ 1.071990] NetWinder Floating Point Emulator V0.97 (double precision) [ 1.079531] audit: initializing netlink subsys (disabled) [ 1.085535] Initialise system trusted keyrings [ 1.090083] Key type blacklist registered [ 1.094229] audit: type=2000 audit(1.074:1): state=initialized audit_enabled=0 res=1 [ 1.102209] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 1.108781] zbud: loaded [ 1.112400] NFS: Registering the id_resolver key type [ 1.117534] Key type id_resolver registered [ 1.121838] Key type id_legacy registered [ 1.125928] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.132716] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.139319] jffs2: version 2.2. (NAND) (SUMMARY) \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc. [ 1.146628] fuse init (API version 7.26) [ 1.151004] orangefs_debugfs_init: called with debug mask: :none: :0: [ 1.157727] orangefs_init: module version upstream loaded [ 1.163222] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 2.560444] random: fast init done [ 6.986034] Key type asymmetric registered [ 6.990206] Asymmetric key parser 'x509' registered [ 6.995507] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 7.003094] io scheduler noop registered [ 7.007087] io scheduler deadline registered [ 7.011549] io scheduler cfq registered (default) [ 7.017543] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 7.026832] mvebu-pcie mbus@f1000000:pcie-controller@82000000: PCI host bridge to bus 0000:00 [ 7.035480] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 7.041838] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 7.048772] pci_bus 0000:00: root bus resource [bus 00-ff] [ 7.054338] pci_bus 0000:00: scanning bus [ 7.054379] pci 0000:00:01.0: [11ab:6282] type 01 class 0x060400 [ 7.054417] pci 0000:00:01.0: calling pci_fixup_ide_bases+0x0/0x40 [ 7.054652] pci 0000:00:02.0: [11ab:6282] type 01 class 0x060400 [ 7.054683] pci 0000:00:02.0: calling pci_fixup_ide_bases+0x0/0x40 [ 7.054888] pci_bus 0000:00: fixups for bus [ 7.054902] PCI: bus0: Fast back to back transfers disabled [ 7.060573] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 0 [ 7.060582] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 7.068640] pci 0000:00:02.0: scanning [bus 00-00] behind bridge, pass 0 [ 7.068648] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 7.076731] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 1 [ 7.076870] pci_bus 0000:01: scanning bus [ 7.076912] pci 0000:01:00.0: [11ab:2a41] type 00 class 0x020000 [ 7.076953] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x9000ffff 64bit] [ 7.076976] pci 0000:01:00.0: reg 0x18: [mem 0x90010000-0x9001ffff 64bit] [ 7.077026] pci 0000:01:00.0: calling pci_fixup_ide_bases+0x0/0x40 [ 7.100496] pci_bus 0000:01: fixups for bus [ 7.100508] PCI: bus1: Fast back to back transfers disabled [ 7.106139] pci_bus 0000:01: bus scan returning with max=01 [ 7.106150] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 7.106164] pci 0000:00:02.0: scanning [bus 00-00] behind bridge, pass 1 [ 7.106310] pci_bus 0000:02: scanning bus [ 7.106348] pci 0000:02:00.0: [11ab:2a42] type 00 class 0x020000 [ 7.106387] pci 0000:02:00.0: reg 0x10: [mem 0x98000000-0x9800ffff 64bit] [ 7.106411] pci 0000:02:00.0: reg 0x18: [mem 0x98010000-0x9801ffff 64bit] [ 7.106460] pci 0000:02:00.0: calling pci_fixup_ide_bases+0x0/0x40 [ 7.130491] pci_bus 0000:02: fixups for bus [ 7.130503] PCI: bus2: Fast back to back transfers disabled [ 7.136137] pci_bus 0000:02: bus scan returning with max=02 [ 7.136147] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 7.136159] pci_bus 0000:00: bus scan returning with max=02 [ 7.136172] pci 0000:00:01.0: fixup irq: got 0 [ 7.136180] pci 0000:00:01.0: assigning IRQ 00 [ 7.136190] pci 0000:00:02.0: fixup irq: got 0 [ 7.136197] pci 0000:00:02.0: assigning IRQ 00 [ 7.136295] pci 0000:01:00.0: fixup irq: got 31 [ 7.136303] pci 0000:01:00.0: assigning IRQ 31 [ 7.136387] pci 0000:02:00.0: fixup irq: got 32 [ 7.136396] pci 0000:02:00.0: assigning IRQ 32 [ 7.136436] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff] [ 7.143404] pci 0000:00:02.0: BAR 14: assigned [mem 0xe0100000-0xe01fffff] [ 7.150340] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit] [ 7.157739] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0010000-0xe001ffff 64bit] [ 7.165130] pci 0000:00:01.0: PCI bridge to [bus 01] [ 7.170167] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff] [ 7.177045] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0100000-0xe010ffff 64bit] [ 7.184443] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0110000-0xe011ffff 64bit] [ 7.191835] pci 0000:00:02.0: PCI bridge to [bus 02] [ 7.196863] pci 0000:00:02.0: bridge window [mem 0xe0100000-0xe01fffff] [ 7.203797] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 7.209963] pcieport 0000:00:01.0: enabling bus mastering [ 7.210040] pcieport 0000:00:02.0: enabling device (0140 -> 0142) [ 7.216232] pcieport 0000:00:02.0: enabling bus mastering [ 7.216694] mv_xor f1060800.xor: Marvell shared XOR driver [ 7.281201] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr ) [ 7.289049] mv_xor f1060900.xor: Marvell shared XOR driver [ 7.351195] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr ) [ 7.359262] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 7.367074] console [ttyS0] disabled [ 7.370845] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 12500000) is a 16550A [ 7.379880] console [ttyS0] enabled [ 7.387018] bootconsole [earlycon0] disabled [ 7.404129] loop: module loaded [ 7.408158] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 7.414617] nand: Hynix H27U1G8F2BTR-BC [ 7.418475] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 7.426117] Scanning device for bad blocks [ 7.496792] 9 ofpart partitions found on MTD device orion_nand [ 7.502668] Creating 9 MTD partitions on "orion_nand": [ 7.507832] 0x000000000000-0x000000080000 : "u-boot" [ 7.514085] 0x000000080000-0x0000000a0000 : "u_env" [ 7.520204] 0x0000000a0000-0x0000000c0000 : "s_env" [ 7.526407] 0x000000200000-0x0000004a0000 : "kernel" [ 7.532742] 0x0000004a0000-0x000001c00000 : "rootfs" [ 7.539149] 0x000001c00000-0x000001ea0000 : "alt_kernel" [ 7.545647] 0x000001ea0000-0x000003600000 : "alt_rootfs" [ 7.552288] 0x000003600000-0x000008000000 : "syscfg" [ 7.558915] 0x0000000c0000-0x000000200000 : "unused" [ 7.566290] libphy: Fixed MDIO Bus: probed [ 7.571326] libphy: orion_mdio_bus: probed [ 7.575733] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 7.583715] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 48:f8:b3:99:29:7e [ 7.592625] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.599206] ehci-pci: EHCI PCI platform driver [ 7.603766] ehci-orion: EHCI orion driver [ 7.607982] orion-ehci f1050000.ehci: EHCI Host Controller [ 7.613555] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 7.621457] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 7.650480] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 7.656768] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.663616] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.670896] usb usb1: Product: EHCI Host Controller [ 7.675794] usb usb1: Manufacturer: Linux 4.12.1-kirkwood-tld-1 ehci_hcd [ 7.682546] usb usb1: SerialNumber: f1050000.ehci [ 7.688013] hub 1-0:1.0: USB hub found [ 7.691884] hub 1-0:1.0: 1 port detected [ 7.696407] usbcore: registered new interface driver usb-storage [ 7.702830] mousedev: PS/2 mouse device common for all mice [ 7.708712] i2c /dev entries driver [ 7.713520] hidraw: raw HID events driver (C) Jiri Kosina [ 7.719286] drop_monitor: Initializing network drop monitor service [ 7.725884] NET: Registered protocol family 17 [ 7.730487] Key type dns_resolver registered [ 7.735521] registered taskstats version 1 [ 7.739639] Loading compiled-in X.509 certificates [ 7.744538] zswap: loaded using pool lzo/zbud [ 7.758861] Key type big_key registered [ 7.772067] Key type encrypted registered [ 7.777496] hctosys: unable to open rtc device (rtc0) [ 7.782933] PM: Hibernation image not present or could not be loaded. [ 7.786012] Freeing unused kernel memory: 1024K [ 8.050533] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 8.262360] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 8.269127] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 8.290551] usb 1-1: Product: USB2.0 Hub [ 8.297962] hub 1-1:1.0: USB hub found [ 8.306366] hub 1-1:1.0: 4 ports detected [ 8.330707] mv88e6085 f1072004.mdio-bus-mii:10: switch 0x171 detected: Marvell 88E6171, revision 2 [ 8.563387] libphy: mv88e6xxx SMI: probed [ 8.567484] DSA: switch 0 0 parsed [ 8.586972] DSA: tree 0 parsed [ 8.630522] usb 1-1.3: new high-speed USB device number 3 using orion-ehci [ 8.793229] usb 1-1.3: New USB device found, idVendor=07d1, idProduct=3303 [ 8.800158] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.807557] usb 1-1.3: Product: 11n Adapter [ 8.811803] usb 1-1.3: Manufacturer: Manufacturer Realtek [ 8.817335] usb 1-1.3: SerialNumber: 00e04c000001 [ 8.920472] usb 1-1.4: new high-speed USB device number 4 using orion-ehci [ 9.172599] usb 1-1.4: New USB device found, idVendor=090c, idProduct=1000 [ 9.179520] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.186918] usb 1-1.4: Product: USB DISK [ 9.190901] usb 1-1.4: Manufacturer: SMI Corporation [ 9.198406] usb-storage 1-1.4:1.0: USB Mass Storage device detected [ 9.205171] scsi host0: usb-storage 1-1.4:1.0 [ 9.230636] usbcore: registered new interface driver uas [ 9.613383] Generic PHY mv88e6xxx-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:00, irq=-1) [ 9.631119] Generic PHY mv88e6xxx-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:01, irq=-1) [ 9.648820] Generic PHY mv88e6xxx-0:02: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:02, irq=-1) [ 9.666565] Generic PHY mv88e6xxx-0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:03, irq=-1) [ 9.689007] Generic PHY mv88e6xxx-0:04: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:04, irq=-1) [ 11.008322] scsi 0:0:0:0: Direct-Access SMI USB DISK 1100 PQ: 0 ANSI: 0 CCS [ 11.022044] sd 0:0:0:0: [sda] 7886848 512-byte logical blocks: (4.04 GB/3.76 GiB) [ 11.036250] sd 0:0:0:0: [sda] Write Protect is off [ 11.045608] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 11.046414] sd 0:0:0:0: [sda] No Caching mode page found [ 11.055910] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 11.072529] random: crng init done [ 11.076078] sda: sda1 [ 11.083647] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 19.991419] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 20.012418] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 22.218076] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 22.462181] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 22.596537] orion_wdt: Initial timeout 21 sec [ 22.694847] marvell-cesa f1030000.crypto: CESA device successfully registered [ 22.927404] Marvell TOPDOG(R) 802.11 Wireless Network Driver version 0.13 [ 23.001164] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.008967] pci 0000:00:01.0: enabling bus mastering [ 23.045095] pci 0000:00:02.0: enabling bus mastering [ 23.046978] mwl8k 0000:01:00.0: Direct firmware load for mwl8k/helper_8366.fw failed with error -2 [ 23.063441] 0000:01:00.0: Error requesting helper fw mwl8k/helper_8366.fw [ 23.080613] mwl8k 0000:02:00.0: Direct firmware load for mwl8k/helper_8366.fw failed with error -2 [ 23.097377] 0000:02:00.0: Error requesting helper fw mwl8k/helper_8366.fw [ 24.125195] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 26.746278] mv643xx_eth: no PHY [ 26.746322] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 27.442609] NET: Registered protocol family 10 [ 27.450591] Segment Routing with IPv6
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 07, 2018 05:23PM |
Admin Registered: 13 years ago Posts: 18,575 |
root@EA4500:~# uname -a Linux EA4500 4.17.2-kirkwood-tld-1 #1 PREEMPT Sun Jun 17 23:16:03 PDT 2018 armv5tel GNU/Linux
[ 23.046978] mwl8k 0000:01:00.0: Direct firmware load for mwl8k/helper_8366.fw failed with error -2You need to install
apt-get install firmware-libertas
Quote
Updated 23 June 2018:
Kernel linux-4.17.2-kirkwood-tld-1 package has been uploaded.
Latest Linux kernel 4.x general release information can be found at:
LinuxChanges log
Download at Dropbox:
linux-4.17.2-kirkwood-tld-1-bodhi.tar.bz2
md5:
cba58ed6f52efe2ea3fffa7e397b725a
sha256:
d4a3558072982dd8663cc54cb863998e15708916ad04b874a584909a3cb376a6
Ron Nelson
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 07, 2018 08:42PM |
Ron Nelson
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 07, 2018 08:48PM |
DHCPREQUEST of 192.168.0.14 on eth0 to 255.255.255.255 port 67My working router is set to give out IP addresses between 192.168.1.2 and 192.168.1.254. Why would it request 192.168.0.14? It definitely does not have an IP address when it finishes booting.
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 07, 2018 10:41PM |
Admin Registered: 13 years ago Posts: 18,575 |
printenv boot
cat /proc/mtd cat /etc/fw_env.config fw_printenv ifconfig -a
Ron Nelson
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 07, 2018 11:25PM |
bootdelay=0 baudrate=115200 loads_echo=0 ipaddr=192.168.1.10 serverip=192.168.1.254 rootpath=/mnt/ARM_FS netmask=255.255.255.0 run_diag=yes boot_part=1 boot_part_ready=3 console=console=ttyS0,115200 badcount=0 bootbadcount=0 uenvbadcount=0 senvbadcount=0 buffbadcount=0 fs_bootargs=unused mtdparts=mtdparts=nand_mtd:512k(uboot)ro,128k@512k(u_env),128k@640k(s_env),26m@2m(kernel),26m@2m(rootfs)fs,26m@28m(alt_kernel),26m@28m(alt_rootfs)fs,74m@54m(syscfg) ethprime=egiga0 bootargs_root=root=/dev/nfs rw fs_bootargs_root=root=/dev/mtdblock4 ro rootfstype=jffs2 alt_fs_bootargs_root=root=/dev/mtdblock6 ro rootfstype=jffs2 mfg_fs_bootargs_root=root=/dev/mtdblock6 ro rootfstype=jffs2 usb_fs_bootargs_root=root=/dev/sda1 rw rootfstype=ext2 bootargs_end=:::DB88FXX81:eth0:none image_name=uImage nfsboot=tftp 0x2000000 uImage; setenv bootargs $(console) $(mtdparts) $(bootargs_root) nfsroot=$(serverip):$(rootpath) ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x2000000; nandboot=nand read.e 0x2000000 0x200000 0x300000; setenv bootargs $(console) $(mtdparts) $(fs_bootargs_root) serial_number=$(sn) uuid=$(uuid) hw_version=$(hw) device_mac=$(mac) factory_date=$(date) wps_pin=$(wps); bootm 0x2000000; altnandboot=nand read.e 0x2000000 0x1c00000 0x300000; setenv bootargs $(console) $(mtdparts) $(alt_fs_bootargs_root) serial_number=$(sn) uuid=$(uuid) hw_version=$(hw) device_mac=$(mac) factory_date=$(date) wps_pin=$(wps); bootm 0x2000000; mfgboot=nand read.e 0x2000000 0x1c00000 0x300000; setenv bootargs $(console) $(mtdparts) $(mfg_fs_bootargs_root) serial_number=$(sn) uuid=$(uuid) hw_version=$(hw) device_mac=$(mac) factory_date=$(date) wps_pin=$(wps); bootm 0x2000000; usbboot=usb start;ext2load usb 0:1 2000000 /uImage; setenv bootargs $(console) $(mtdparts) $(usb_fs_bootargs_root) rootdelay=10; bootm 0x2000000; standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000; lcd0_enable=0 lcd0_params=640x480-16@60 ethmtu=1500 eth1mtu=1500 mvPhoneConfig=mv_phone_config=dev[0]:fxs,dev[1]:fxo mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500 usb0Mode=host yuk_ethaddr=00:00:00:EE:51:81 nandEcc=1bit netretry=no rcvrip=169.254.100.100 loadaddr=0x02000000 autoload=no image_multi=yes mtdparts_version=4 envsaved=yes ethact=egiga0 auto_recovery=no bootargs_usb=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial load_usb=usb start; ext2load usb 0:1 0x800000 /boot/uImage; ext2load usb 0:1 0x02100000 /boot/uInitrd bootcmd_usb=setenv bootargs $(bootargs_usb); run load_usb; bootm 0x800000 0x02100000 bootcmd=run bootcmd_usb stdin=serial stdout=serial stderr=serial mainlineLinux=no enaMonExt=no enaCpuStream=no enaWrAllo=no pexMode=RC disL2Cache=no setL2CacheWT=yes disL2Prefetch=yes enaICPref=yes enaDCPref=yes sata_dma_mode=yes netbsd_en=no vxworks_en=no disaMvPnp=no enaAutoRecovery=yes pcieTune=no pcieTune1=no layout=ver.0.0.7 model=EA4500 hw=RGWM-C4_0GA edal_key=FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF mac=48:F8:B3:99:29:7E ethaddr=48:F8:B3:99:29:7E eth1addr=48:F8:B3:99:29:7F date=2013/09/18 sn=12A10609312967 uuid=F6EC3F5891A460B41EDFAAA8D9AF2404 wps=21300455 Environment size: 3200/131068 bytes
dev: size erasesize name mtd0: 00080000 00020000 "u-boot" mtd1: 00020000 00020000 "u_env" mtd2: 00020000 00020000 "s_env" mtd3: 002a0000 00020000 "kernel" mtd4: 01760000 00020000 "rootfs" mtd5: 002a0000 00020000 "alt_kernel" mtd6: 01760000 00020000 "alt_rootfs" mtd7: 04a00000 00020000 "syscfg" mtd8: 00140000 00020000 "unused"
# MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd0 0xc0000 0x20000 0x20000
Cannot read bad block mark: Invalid argument
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::4af8:b3ff:fe99:297e prefixlen 64 scopeid 0x20<link> ether 48:f8:b3:99:29:7e txqueuelen 1000 (Ethernet) RX packets 555 bytes 59836 (58.4 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 34 bytes 5736 (5.6 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 35 ethernet1: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 48:f8:b3:99:29:7e txqueuelen 1000 (Ethernet) RX packets 555 bytes 45406 (44.3 KiB) RX errors 0 dropped 19 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ethernet2: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 48:f8:b3:99:29:7e txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ethernet3: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 48:f8:b3:99:29:7e txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ethernet4: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 48:f8:b3:99:29:7e txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 internet: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 48:f8:b3:99:29:7e txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 3 bytes 252 (252.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 3 bytes 252 (252.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlp1s0: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 48:f8:b3:99:29:80 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlp2s0: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 48:f8:b3:99:29:82 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 08, 2018 12:36AM |
Admin Registered: 13 years ago Posts: 18,575 |
# MTD device name Device offset Env. size Flash sector size Number of sectors # Linksys EA4500 /dev/mtd1 00080000 0x20000 0x20000
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 08, 2018 12:43AM |
Admin Registered: 13 years ago Posts: 18,575 |
wlp1s0: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 48:f8:b3:99:29:80 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlp2s0: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 48:f8:b3:99:29:82 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::4af8:b3ff:fe99:297e prefixlen 64 scopeid 0x20<link> ether 48:f8:b3:99:29:7e txqueuelen 1000 (Ethernet) RX packets 555 bytes 59836 (58.4 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 34 bytes 5736 (5.6 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Ron Nelson
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 08, 2018 02:28PM |
__ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** WNC BOARD: Viper R2.2 LE ** ** For Development Only. Not For Demo ** U-Boot 1.1.4 (Sep 15 2011 - 15:46:36) Marvell version: 3.5.9 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFB20 Soc: 88F6282 A1CPU running @ 1200Mhz L2 running @ 400Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM (DDR2) CAS Latency = 6 tRP = 6 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 128MB DRAM Total size 128MB 16bit width Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:128 MB Flash: 0 kB CPU : Marvell Feroceon (Rev 1) u_env Offset: 00080000 s_env Offset: 000a0000 Streaming disabled Write allocate disabled Module 0 is RGMII USB 0: host mode PEX 0: PCI Express Root Complex Interface PEX interface detected Link X1 PEX 1: PCI Express Root Complex Interface PEX interface detected Link X1 Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 0 Viper>> printenv bootdelay=0 baudrate=115200 loads_echo=0 ipaddr=192.168.1.10 serverip=192.168.1.254 rootpath=/mnt/ARM_FS netmask=255.255.255.0 run_diag=yes boot_part=1 boot_part_ready=3 console=console=ttyS0,115200 badcount=0 bootbadcount=0 uenvbadcount=0 senvbadcount=0 buffbadcount=0 fs_bootargs=unused mtdparts=mtdparts=nand_mtd:512k(uboot)ro,128k@512k(u_env),128k@640k(s_env),26m@2m(kernel),26m@2m(rootfs)fs,26m@28m(alt_kernel),26m@28m(alt_rootfs)fs,74m@54m(syscfg) ethprime=egiga0 bootargs_root=root=/dev/nfs rw fs_bootargs_root=root=/dev/mtdblock4 ro rootfstype=jffs2 alt_fs_bootargs_root=root=/dev/mtdblock6 ro rootfstype=jffs2 mfg_fs_bootargs_root=root=/dev/mtdblock6 ro rootfstype=jffs2 usb_fs_bootargs_root=root=/dev/sda1 rw rootfstype=ext2 bootargs_end=:::DB88FXX81:eth0:none image_name=uImage nfsboot=tftp 0x2000000 uImage; setenv bootargs $(console) $(mtdparts) $(bootargs_root) nfsroot=$(serverip):$(rootpath) ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x2000000; nandboot=nand read.e 0x2000000 0x200000 0x300000; setenv bootargs $(console) $(mtdparts) $(fs_bootargs_root) serial_number=$(sn) uuid=$(uuid) hw_version=$(hw) device_mac=$(mac) factory_date=$(date) wps_pin=$(wps); bootm 0x2000000; altnandboot=nand read.e 0x2000000 0x1c00000 0x300000; setenv bootargs $(console) $(mtdparts) $(alt_fs_bootargs_root) serial_number=$(sn) uuid=$(uuid) hw_version=$(hw) device_mac=$(mac) factory_date=$(date) wps_pin=$(wps); bootm 0x2000000; mfgboot=nand read.e 0x2000000 0x1c00000 0x300000; setenv bootargs $(console) $(mtdparts) $(mfg_fs_bootargs_root) serial_number=$(sn) uuid=$(uuid) hw_version=$(hw) device_mac=$(mac) factory_date=$(date) wps_pin=$(wps); bootm 0x2000000; usbboot=usb start;ext2load usb 0:1 2000000 /uImage; setenv bootargs $(console) $(mtdparts) $(usb_fs_bootargs_root) rootdelay=10; bootm 0x2000000; standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000; lcd0_enable=0 lcd0_params=640x480-16@60 ethmtu=1500 eth1mtu=1500 mvPhoneConfig=mv_phone_config=dev[0]:fxs,dev[1]:fxo mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500 usb0Mode=host yuk_ethaddr=00:00:00:EE:51:81 nandEcc=1bit netretry=no rcvrip=169.254.100.100 loadaddr=0x02000000 autoload=no image_multi=yes mtdparts_version=4 envsaved=yes ethact=egiga0 auto_recovery=no bootargs_usb=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial load_usb=usb start; ext2load usb 0:1 0x800000 /boot/uImage; ext2load usb 0:1 0x02100000 /boot/uInitrd bootcmd_usb=setenv bootargs $(bootargs_usb); run load_usb; bootm 0x800000 0x02100000 bootcmd=run bootcmd_usb stdin=serial stdout=serial stderr=serial mainlineLinux=no enaMonExt=no enaCpuStream=no enaWrAllo=no pexMode=RC disL2Cache=no setL2CacheWT=yes disL2Prefetch=yes enaICPref=yes enaDCPref=yes sata_dma_mode=yes netbsd_en=no vxworks_en=no disaMvPnp=no enaAutoRecovery=yes pcieTune=no pcieTune1=no layout=ver.0.0.7 model=EA4500 hw=RGWM-C4_0GA edal_key=FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF mac=48:F8:B3:99:29:7E ethaddr=48:F8:B3:99:29:7E eth1addr=48:F8:B3:99:29:7F date=2013/09/18 sn=12A10609312967 uuid=F6EC3F5891A460B41EDFAAA8D9AF2404 wps=21300455 Environment size: 3200/131068 bytes Viper>> boot (Re)start USB... USB: scanning bus for devices... 2 USB Device(s) found Waiting for storage device(s) to settle before scanning... 1 Storage Device(s) found .... . ...... ............ ......................... ................................................... ...................................................................................................... ......................................................................................................................................................................... 3834397 bytes read .... . ................... ......................... ................................................... ...................................................................................................... ............................................................................................................................................................................................................ .... ................................................................................................................................................................................................................................................................................................................................................... 7723083 bytes read ## Booting image at 00800000 ... Image Name: Linux-4.12.1-kirkwood-tld-1 Created: 2018-07-06 21:30:30 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3834333 Bytes = 3.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 02100000 ... Image Name: initramfs-4.12.1-kirkwood-tld-1 Created: 1970-01-01 0:38:31 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7723019 Bytes = 7.4 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.12.1-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Sat Jul 15 21:40:50 PDT 2017 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Linksys Viper (E4200v2 / EA4500) [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 108948K/131072K available (8192K kernel code, 716K rwdata, 1972K rodata, 1024K init, 288K bss, 22124K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0900000 (9184 kB) [ 0.000000] .init : 0xc0c00000 - 0xc0d00000 (1024 kB) [ 0.000000] .data : 0xc0d00000 - 0xc0db3274 ( 717 kB) [ 0.000000] .bss : 0xc0db9b9c - 0xc0e01e60 ( 289 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000007] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.007906] Switching to timer-based delay loop, resolution 5ns [ 0.014324] Console: colour dummy device 80x30 [ 0.018904] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000) [ 0.029513] pid_max: default: 32768 minimum: 301 [ 0.034378] Security Framework initialized [ 0.038699] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.045379] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.053336] CPU: Testing write buffer coherency: ok [ 0.059285] Setting up static identity map for 0x100000 - 0x100058 [ 0.065775] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1 [ 0.074106] devtmpfs: initialized [ 0.082195] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.092152] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.098723] prandom: seed boundary self test passed [ 0.107383] prandom: 100 self tests passed [ 0.111598] pinctrl core: initialized pinctrl subsystem [ 0.118061] NET: Registered protocol family 16 [ 0.122988] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.131493] cpuidle: using governor ladder [ 0.135720] cpuidle: using governor menu [ 0.140154] Feroceon L2: Enabling L2 [ 0.143835] Feroceon L2: Cache support initialised. [ 0.149169] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set [ 0.164138] No ATAGs? [ 0.173338] vgaarb: loaded [ 0.178827] SCSI subsystem initialized [ 0.183101] usbcore: registered new interface driver usbfs [ 0.188774] usbcore: registered new interface driver hub [ 0.194221] usbcore: registered new device driver usb [ 0.200437] clocksource: Switched to clocksource orion_clocksource [ 0.295764] VFS: Disk quotas dquot_6.6.0 [ 0.299834] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.317419] NET: Registered protocol family 2 [ 0.322624] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.329652] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.336104] TCP: Hash tables configured (established 1024 bind 1024) [ 0.342611] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.348516] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.355035] NET: Registered protocol family 1 [ 0.359864] RPC: Registered named UNIX socket transport module. [ 0.365913] RPC: Registered udp transport module. [ 0.370709] RPC: Registered tcp transport module. [ 0.375472] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.382215] Unpacking initramfs... [ 1.067909] Freeing initrd memory: 7544K [ 1.072147] NetWinder Floating Point Emulator V0.97 (double precision) [ 1.079694] audit: initializing netlink subsys (disabled) [ 1.085702] Initialise system trusted keyrings [ 1.090248] Key type blacklist registered [ 1.094394] audit: type=2000 audit(1.074:1): state=initialized audit_enabled=0 res=1 [ 1.102362] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 1.108930] zbud: loaded [ 1.112556] NFS: Registering the id_resolver key type [ 1.117687] Key type id_resolver registered [ 1.121992] Key type id_legacy registered [ 1.126075] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.132864] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.139466] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.146773] fuse init (API version 7.26) [ 1.151150] orangefs_debugfs_init: called with debug mask: :none: :0: [ 1.157873] orangefs_init: module version upstream loaded [ 1.163361] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 2.560444] random: fast init done [ 6.986551] Key type asymmetric registered [ 6.991020] Asymmetric key parser 'x509' registered [ 6.996016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 7.003598] io scheduler noop registered [ 7.007589] io scheduler deadline registered [ 7.012050] io scheduler cfq registered (default) [ 7.018049] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 7.027347] mvebu-pcie mbus@f1000000:pcie-controller@82000000: PCI host bridge to bus 0000:00 [ 7.035998] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 7.042356] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 7.049290] pci_bus 0000:00: root bus resource [bus 00-ff] [ 7.055422] PCI: bus0: Fast back to back transfers disabled [ 7.061099] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 7.069167] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 7.100510] PCI: bus1: Fast back to back transfers disabled [ 7.130502] PCI: bus2: Fast back to back transfers disabled [ 7.136434] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff] [ 7.143394] pci 0000:00:02.0: BAR 14: assigned [mem 0xe0100000-0xe01fffff] [ 7.150333] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit] [ 7.157730] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0010000-0xe001ffff 64bit] [ 7.165121] pci 0000:00:01.0: PCI bridge to [bus 01] [ 7.170159] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff] [ 7.177037] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0100000-0xe010ffff 64bit] [ 7.184435] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0110000-0xe011ffff 64bit] [ 7.191827] pci 0000:00:02.0: PCI bridge to [bus 02] [ 7.196863] pci 0000:00:02.0: bridge window [mem 0xe0100000-0xe01fffff] [ 7.203798] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 7.210040] pcieport 0000:00:02.0: enabling device (0140 -> 0142) [ 7.216691] mv_xor f1060800.xor: Marvell shared XOR driver [ 7.281201] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr ) [ 7.289046] mv_xor f1060900.xor: Marvell shared XOR driver [ 7.351196] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr ) [ 7.359262] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 7.367078] console [ttyS0] disabled [ 7.370853] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 12500000) is a 16550A [ 7.379889] console [ttyS0] enabled [ 7.379889] console [ttyS0] enabled [ 7.387028] bootconsole [earlycon0] disabled [ 7.387028] bootconsole [earlycon0] disabled [ 7.404162] loop: module loaded [ 7.408185] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 7.414644] nand: Hynix H27U1G8F2BTR-BC [ 7.418502] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 7.426144] Scanning device for bad blocks [ 7.496825] 9 ofpart partitions found on MTD device orion_nand [ 7.502704] Creating 9 MTD partitions on "orion_nand": [ 7.507868] 0x000000000000-0x000000080000 : "u-boot" [ 7.514124] 0x000000080000-0x0000000a0000 : "u_env" [ 7.520241] 0x0000000a0000-0x0000000c0000 : "s_env" [ 7.526460] 0x000000200000-0x0000004a0000 : "kernel" [ 7.532802] 0x0000004a0000-0x000001c00000 : "rootfs" [ 7.539213] 0x000001c00000-0x000001ea0000 : "alt_kernel" [ 7.545709] 0x000001ea0000-0x000003600000 : "alt_rootfs" [ 7.552350] 0x000003600000-0x000008000000 : "syscfg" [ 7.558981] 0x0000000c0000-0x000000200000 : "unused" [ 7.566352] libphy: Fixed MDIO Bus: probed [ 7.571389] libphy: orion_mdio_bus: probed [ 7.575793] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 7.583771] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 48:f8:b3:99:29:7e [ 7.592686] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.599266] ehci-pci: EHCI PCI platform driver [ 7.603827] ehci-orion: EHCI orion driver [ 7.608046] orion-ehci f1050000.ehci: EHCI Host Controller [ 7.613617] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 7.621489] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 7.650479] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 7.656766] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.663616] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.670896] usb usb1: Product: EHCI Host Controller [ 7.675795] usb usb1: Manufacturer: Linux 4.12.1-kirkwood-tld-1 ehci_hcd [ 7.682545] usb usb1: SerialNumber: f1050000.ehci [ 7.688014] hub 1-0:1.0: USB hub found [ 7.691884] hub 1-0:1.0: 1 port detected [ 7.696408] usbcore: registered new interface driver usb-storage [ 7.702831] mousedev: PS/2 mouse device common for all mice [ 7.708707] i2c /dev entries driver [ 7.713530] hidraw: raw HID events driver (C) Jiri Kosina [ 7.719292] drop_monitor: Initializing network drop monitor service [ 7.725892] NET: Registered protocol family 17 [ 7.730495] Key type dns_resolver registered [ 7.735526] registered taskstats version 1 [ 7.739640] Loading compiled-in X.509 certificates [ 7.744540] zswap: loaded using pool lzo/zbud [ 7.758785] Key type big_key registered [ 7.772059] Key type encrypted registered [ 7.777482] hctosys: unable to open rtc device (rtc0) [ 7.786001] Freeing unused kernel memory: 1024K Loading, please wait... starting version 232 [ 8.050545] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 8.295075] mv88e6085 f1072004.mdio-bus-mii:10: switch 0x171 detected: Marvell 88E6171, revision 2 [ 8.306386] usb 1-1: New USB device found, idVendor=090c, idProduct=1000 [ 8.306395] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.306401] usb 1-1: Product: USB DISK [ 8.306407] usb 1-1: Manufacturer: SMI Corporation [ 8.307217] usb-storage 1-1:1.0: USB Mass Storage device detected [ 8.314209] scsi host0: usb-storage 1-1:1.0 [ 8.630244] usbcore: registered new interface driver uas [ 8.722558] libphy: mv88e6xxx SMI: probed [ 8.726663] DSA: switch 0 0 parsed [ 8.730083] DSA: tree 0 parsed [ 9.620288] Generic PHY mv88e6xxx-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:00, irq=-1) [ 9.644943] Generic PHY mv88e6xxx-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:01, irq=-1) [ 9.665128] Generic PHY mv88e6xxx-0:02: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:02, irq=-1) [ 9.687657] Generic PHY mv88e6xxx-0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:03, irq=-1) [ 9.710143] Generic PHY mv88e6xxx-0:04: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:04, irq=-1) Begin: Loading essential drivers ... done. [ 10.120863] scsi 0:0:0:0: Direct-Access SMI USB DISK 1100 PQ: 0 ANSI: 0 CCS [ 10.134817] sd 0:0:0:0: [sda] 7886848 512-byte logical blocks: (4.04 GB/3.76 GiB) [ 10.149318] sd 0:0:0:0: [sda] Write Protect is off [ 10.159682] sd 0:0:0:0: [sda] No Caching mode page found [ 10.167893] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 10.183560] random: crng init done [ 10.187112] sda: sda1 [ 10.195687] sd 0:0:0:0: [sda] Attached SCSI removable disk Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.29.2 [/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1 rootfs: clean, 14601/246512 files, 172291/985600 blocks done. [ 20.053327] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 20.073790] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [ ok ] Setting hostname to 'debian'...done. [....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232 . ok [ 22.234267] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ ok done. [....] Waiting for /dev to be fully populated...[ 22.521431] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 22.695185] marvell-cesa f1030000.crypto: CESA device successfully registered [ 22.752483] orion_wdt: Initial timeout 21 sec [ 22.902175] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.072034] Marvell TOPDOG(R) 802.11 Wireless Network Driver version 0.13 [ 24.070571] ieee80211 phy0: Command RF_ANTENNA error 0x2 [ 24.075921] ieee80211 phy0: failed to set # of RX antennas [ 24.090498] ieee80211 phy0: Command RF_ANTENNA error 0x2 [ 24.095837] ieee80211 phy0: failed to set # of TX antennas [ 24.120496] ieee80211 phy0: 88w8366 v48, 48f8b3992980, STA firmware 4.1.0.3 [ 24.139643] ieee80211 phy1: Command RF_ANTENNA error 0x2 [ 24.150554] ieee80211 phy1: failed to set # of RX antennas [ 24.160600] ieee80211 phy1: Command RF_ANTENNA error 0x2 [ 24.165950] ieee80211 phy1: failed to set # of TX antennas [ 24.172120] mwl8k 0000:01:00.0 wlp1s0: renamed from wlan0 [ 24.178279] ieee80211 phy1: 88w8366 v48, 48f8b3992982, STA firmware 4.1.0.3 [ 24.244930] mwl8k 0000:02:00.0 wlp2s0: renamed from wlan0 done. [ ok ] Activating swap:. [ 24.938978] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ ok ] Will now activate lvm and md swap:done. [info] Will now check all file systems. fsck from util-linux 2.29.2 Checking all file systems. LABEL=rootfs is mounted [....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is w[ ok le.. [....] Cleaning up temporary files...[....] Cleanin[ ok p...done. [ ok . [ ok ] Will now mount local filesystems:. [ ok ] Will now activate swapfile swap:done. [ ok ] Checking minimum space in /tmp...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables...done. [ ok ] Initializing random number generator...done. [ 27.747206] mv643xx_eth: no PHY [ 27.747249] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5 Copyright 2004-2016 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/48:f8:b3:99:29:7e Sending on LPF/eth0/48:f8:b3:99:29:7e Sending on Socket/fallback DHCPREQUEST of 192.168.0.14 on eth0 to 255.255.255.255 port 67 [ 101.084047] NET: Registered protocol family 10 [ 101.092262] Segment Routing with IPv6 DHCPREQUEST of 192.168.0.14 on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 2 No DHCPOFFERS received. Trying recorded lease 192.168.0.14 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. --- 192.168.0.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms No working leases in persistent database - sleeping. done. [ ok ] Starting RPC port mapper daemon: rpcbind. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1351 (syslogd) . ok [ ok ] Starting system message bus: dbus. [ ok ] Starting NFS common utilities: statd idmapd. [....] Starting Avahi mDNS/DNS-SD Daemon: avahi-dae[ o. [....] Not starting NFS kernel daemon: no exports. [wa (warning). [ ok ] Starting NTP server: ntpd. [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1350 (klogd) . ok [ ok ] Starting OpenBSD Secure Shell server: sshd. [ ok ] Running local boot scripts (/etc/rc.local). Debian GNU/Linux 9 debian ttyS0 Debian GNU/Linux 9 debian ttyS0 debian login: root Password: Last login: Wed Dec 31 16:03:20 PST 1969 on ttyS0 Linux debian 4.12.1-kirkwood-tld-1 #1 PREEMPT Sat Jul 15 21:40:50 PDT 2017 armv5tel The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@debian:~# cat /proc/mtd dev: size erasesize name mtd0: 00080000 00020000 "u-boot" mtd1: 00020000 00020000 "u_env" mtd2: 00020000 00020000 "s_env" mtd3: 002a0000 00020000 "kernel" mtd4: 01760000 00020000 "rootfs" mtd5: 002a0000 00020000 "alt_kernel" mtd6: 01760000 00020000 "alt_rootfs" mtd7: 04a00000 00020000 "syscfg" mtd8: 00140000 00020000 "unused" root@debian:~# cat /etc/fw_env.config # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd1 00080000 0x20000 0x20000 root@debian:~# fw_printenv Environment does not fit into available sectors root@debian:~# ifconfig -a eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::4af8:b3ff:fe99:297e prefixlen 64 scopeid 0x20<link> ether 48:f8:b3:99:29:7e txqueuelen 1000 (Ethernet) RX packets 535 bytes 42058 (41.0 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 55 bytes 10093 (9.8 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 35 ethernet1: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 48:f8:b3:99:29:7e txqueuelen 1000 (Ethernet) RX packets 535 bytes 28148 (27.4 KiB) RX errors 0 dropped 28 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ethernet2: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 48:f8:b3:99:29:7e txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ethernet3: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 48:f8:b3:99:29:7e txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ethernet4: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 48:f8:b3:99:29:7e txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 internet: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 48:f8:b3:99:29:7e txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 4 bytes 364 (364.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 4 bytes 364 (364.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlp1s0: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 48:f8:b3:99:29:80 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlp2s0: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 48:f8:b3:99:29:82 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0The reason WiFi was working is that I manually copied firmware-libertas over on to the rootfs and installed it with dpkg like I tried to do with firmware-realtek
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 08, 2018 04:59PM |
Admin Registered: 13 years ago Posts: 18,575 |
cat /etc/resolv.conf
Ron Nelson
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 08, 2018 05:22PM |
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 08, 2018 06:07PM |
Admin Registered: 13 years ago Posts: 18,575 |
> nameserver 192.168.1.1 >> Should it have more? I've never had to edit it to
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 09, 2018 01:08AM |
Admin Registered: 13 years ago Posts: 18,575 |
Quote
And error about fw_printenv was because the content of fw_env.config should look like:
# MTD device name Device offset Env. size Flash sector size Number of sectors
# Linksys EA4500
/dev/mtd1 00080000 0x20000 0x20000
fw_printenv
cat /etc/network/interfaces
Ron Nelson
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 09, 2018 03:48PM |
auto lo eth0 iface lo inet loopback iface eth0 inet static address 192.168.1.254 netmask 255.255.255.0 gateway 192.168.1.1 network 192.168.1.1With that setup, it get's the IP address, but can't ping the router, or anything other than itself. The ping output looks like this:
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. From 192.168.1.254 icmp_seq=1 Destination Host Unreachable From 192.168.1.254 icmp_seq=2 Destination Host Unreachable From 192.168.1.254 icmp_seq=3 Destination Host Unreachable From 192.168.1.254 icmp_seq=4 Destination Host UnreachableIs it weird that the message is coming from it's own address?
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 09, 2018 04:50PM |
Admin Registered: 13 years ago Posts: 18,575 |
setenv mtdparts 'mtdparts=orion_nand:512k(uboot)ro,128k@512k(u_env),128k@640k(s_env),26m@2m(kernel),26m@2m(rootfs)fs,26m@28m(alt_kernel),26m@28m(alt_rootfs)fs,74m@54m(syscfg)' setenv bootargs_usb 'console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $(mtdparts) earlyprintk=serial'
Ron Nelson
Re: Install Linux Kernel 4.16.1 Kirkwood on Linksys EA4500 July 09, 2018 05:08PM |
Viper>> printenv bootdelay=0 baudrate=115200 loads_echo=0 ipaddr=192.168.1.10 serverip=192.168.1.254 rootpath=/mnt/ARM_FS netmask=255.255.255.0 run_diag=yes boot_part=1 boot_part_ready=3 console=console=ttyS0,115200 badcount=0 bootbadcount=0 uenvbadcount=0 senvbadcount=0 buffbadcount=0 fs_bootargs=unused ethprime=egiga0 bootargs_root=root=/dev/nfs rw fs_bootargs_root=root=/dev/mtdblock4 ro rootfstype=jffs2 alt_fs_bootargs_root=root=/dev/mtdblock6 ro rootfstype=jffs2 mfg_fs_bootargs_root=root=/dev/mtdblock6 ro rootfstype=jffs2 usb_fs_bootargs_root=root=/dev/sda1 rw rootfstype=ext2 bootargs_end=:::DB88FXX81:eth0:none image_name=uImage nfsboot=tftp 0x2000000 uImage; setenv bootargs $(console) $(mtdparts) $(bootargs_root) nfsroot=$(serverip):$(rootpath) ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x2000000; nandboot=nand read.e 0x2000000 0x200000 0x300000; setenv bootargs $(console) $(mtdparts) $(fs_bootargs_root) serial_number=$(sn) uuid=$(uuid) hw_version=$(hw) device_mac=$(mac) factory_date=$(date) wps_pin=$(wps); bootm 0x2000000; altnandboot=nand read.e 0x2000000 0x1c00000 0x300000; setenv bootargs $(console) $(mtdparts) $(alt_fs_bootargs_root) serial_number=$(sn) uuid=$(uuid) hw_version=$(hw) device_mac=$(mac) factory_date=$(date) wps_pin=$(wps); bootm 0x2000000; mfgboot=nand read.e 0x2000000 0x1c00000 0x300000; setenv bootargs $(console) $(mtdparts) $(mfg_fs_bootargs_root) serial_number=$(sn) uuid=$(uuid) hw_version=$(hw) device_mac=$(mac) factory_date=$(date) wps_pin=$(wps); bootm 0x2000000; usbboot=usb start;ext2load usb 0:1 2000000 /uImage; setenv bootargs $(console) $(mtdparts) $(usb_fs_bootargs_root) rootdelay=10; bootm 0x2000000; standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000; lcd0_enable=0 lcd0_params=640x480-16@60 ethmtu=1500 eth1mtu=1500 mvPhoneConfig=mv_phone_config=dev[0]:fxs,dev[1]:fxo mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500 usb0Mode=host yuk_ethaddr=00:00:00:EE:51:81 nandEcc=1bit netretry=no rcvrip=169.254.100.100 loadaddr=0x02000000 autoload=no image_multi=yes mtdparts_version=4 envsaved=yes ethact=egiga0 auto_recovery=no load_usb=usb start; ext2load usb 0:1 0x800000 /boot/uImage; ext2load usb 0:1 0x02100000 /boot/uInitrd bootcmd_usb=setenv bootargs $(bootargs_usb); run load_usb; bootm 0x800000 0x02100000 bootcmd=run bootcmd_usb mtdparts=mtdparts=orion_nand:512k(uboot)ro,128k@512k(u_env),128k@640k(s_env),26m@2m(kernel),26m@2m(rootfs)fs,26m@28m(alt_kernel),26m@28m(alt_rootfs)fs,74m@54m(syscfg) bootargs_usb=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $(mtdparts) earlyprintk=serial stdin=serial stdout=serial stderr=serial mainlineLinux=no enaMonExt=no enaCpuStream=no enaWrAllo=no pexMode=RC disL2Cache=no setL2CacheWT=yes disL2Prefetch=yes enaICPref=yes enaDCPref=yes sata_dma_mode=yes netbsd_en=no vxworks_en=no disaMvPnp=no enaAutoRecovery=yes pcieTune=no pcieTune1=no layout=ver.0.0.7 model=EA4500 hw=RGWM-C4_0GA edal_key=FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF mac=48:F8:B3:99:29:7E ethaddr=48:F8:B3:99:29:7E eth1addr=48:F8:B3:99:29:7F date=2013/09/18 sn=12A10609312967 uuid=F6EC3F5891A460B41EDFAAA8D9AF2404 wps=21300455 Environment size: 3214/131068 bytes Viper>> boot