Has anyone had success installing and using a DisplayLink device ( http://libdlo.freedesktop.org/wiki/ ) with their dockstar or pogoplug? I'd be interested in hearing your success story (or failure). Also, anybody have cheap source for purchasing? Best I've been able to find is this one on amazon: https://www.amazon.com/Plugable-UGA-125-Multiple-Monitors-1280x1024/dp/B003IE49T8

If you get the newest kernel with the Dockstar patch added in it will have a DisplayLink kernel module with it. I saw that as I was going through and turning off the modules/features I didn't need.

I don't see why it wouldn't work though as long as you have X11 installed on your Dockstar along with the other needed drivers/

EDIT: EVGA has the UV16+ for sale for $25 in the B-Stock store right now. (http://www.evga.com/products/prodlist.asp?switch=20)

EDIT2: Free ground shipping on B-Stock items - $25 total!



Edited 2 time(s). Last edit at 09/09/2010 07:36PM by dethl.

dethl Wrote:
-------------------------------------------------------
> EDIT: EVGA has the UV16+ for sale for $25 in the
> B-Stock store right now.
> (http://www.evga.com/products/prodlist.asp?switch=
> 20)
>
> EDIT2: Free ground shipping on B-Stock items -
> $25 total!

Way cool! I've placed my order. When it arrives, I'll report on my success or failure.

Regards

Looks like the UV Plus+ UV12 is even less at $15. i haven't looked into the differences but I bet the UV12 would sufficient for any dockstar purposes.
UV16 UV12
Anyone familiar with the resources required by displaylink? If it doesn't play quite well enough with the dockstar you can always use it for your pc.

Twi Wrote:
-------------------------------------------------------
> Looks like the UV Plus+ UV12 is even less at $15.
> i haven't looked into the differences but I bet
> the UV12 would sufficient for any dockstar
> purposes.
> UV16 UV12
> Anyone familiar with the resources required by
> displaylink? If it doesn't play quite well enough
> with the dockstar you can always use it for your
> pc.

Difference is max resolution - UV12 is 1440x900 and UV16 is 1600x1200.

I ordered a UV16 myself - going to try and get it working on a 1680x1050 widescreen monitor.



Edited 1 time(s). Last edit at 09/09/2010 11:54PM by dethl.

Just ran across this
Sheevaplug with DisplayLink monitor, found via this thread. Driver wiki

Quite interested in how your UV16 goes.
I would like a small vga screen around 5 or 7" myself but can't find much at all. Well not much that doesn't cost more then a 17" at least. I really don't want a displaylink LCD, a separate adapter is much better IMO.



Edited 1 time(s). Last edit at 09/10/2010 03:23AM by Twi.

no problem here i have this adapter on all my self building devices
only one problem
!no console output
!only X
worked for me

the driver is in the staging area simply enable it and build

gorgone Wrote:
-------------------------------------------------------
> no problem here i have this adapter on all my self
> building devices
> only one problem
> !no console output
> !only X
> worked for me

Sounds like maybe the problem described here: http://libdlo.freedesktop.org/wiki/TextConsole

The price has gone back up on the 16. The other is still $15 with it looks like free shipping.

Is it just me or would this just about fit on the dockstars top port. The cable would likely break it off but with right hack you could get this into one very small box.

If anyone finds a cheap 7-10 inch display, please do post it. I'm thinking car pc. :)

Any further development with getting Displaylink to work on the DS? Thanks.

My UV16s arrived, but they did not come with DVI to VGA adapters. So I've order two models of adapters from dealextreme.com:

http://www.dealextreme.com/details.dx/sku.708
http://www.dealextreme.com/details.dx/sku.8312

I bought the UV12 and managed to get the "green" screen when plugged in, so I guess the kernel provided with Jeff's install works. Not sure of next steps though. I have read thru the stuffs at http://libdlo.freedesktop.org/wiki/ but still confused. Maybe I need to read it again. I'm able to get X over ssh working but not able to get it working with a monitor/Displaylink connected to the DS. Any tips would be appreciated.

What error message do you get?
Try other resolutions?

http://cgi.ebay.de/Display-Adapter-USB-HDMI-DVI-VGA-1920-x1080-1080P-HD-/250678466085?pt=DE_Technik_Computerzubeh%C3%B6r_Kabel_Adapter&hash=item3a5d99d625

resolutions of up to 1920 x 1080 at 32 bit color

green screen is perfect (kernel module active)
u only need to start the xserver with the usb xorg driver
my usb vga console not work only X

Thank you for this thread.

Should I prefer a DisplayLink certified adapter or do other models as the one, rather cheap, pointed by gorgone work as well ?

i dont have expeiences with other devices
the displaylink is realy cheap and works stable although the driver resists in staging
a little problem is the xorg binary build
but if someone need i can make a deb

What about the speed of a DockStar with a DisplayLink device; is is sufficient for browsing the web with a Browser like Chromium?

it performs on normal speed no issues

I also saw no speed issues.

Using the HP DisplayLink Adapter:
http://h10010.www1.hp.com/wwpc/us/en/sm/WF06c/A10-51210-332469-332462-332469-3913299-3913300-3913303.html

And what about playing video with mplayer e.g. ?

I'm using a Samsung LD220G with a DisplayLink Connection. Luckily I got a greenscreen right away as I plugged in my usb cable. I installed the packages for the xserver but it seems that debian is unable to find the command "xorgconfig" which should generate a default xorg.conf. After googling I found another command named "Xorg -configure" which should be equally to "xorgconfig". Here's what I got from the output:

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32 armv5tel Debian
Current Operating System: Linux debian 2.6.32-dockstar #2 Mon Sep 6 15:43:50 EDT 2010 armv5tel
Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext2 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
Build Date: 08 September 2010  10:49:52PM
xorg-server 2:1.7.7-6 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.16.4
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct  3 18:03:56 2010
List of video drivers:
        displaylink
        mach64
        apm
        ark
        r128
        radeon
        ati
        chips
        cirrus
        neomagic
        i128
        voodoo
        i740
        mga
        rendition
        nv
        s3virge
        s3
        siliconmotion
        savage
        sisusb
        sis
        trident
        tdfx
        tseng
        fbdev
        vesa

Backtrace:
Segmentation fault at address (nil)

Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting


Please consult the The X.Org Foundation support 
         at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

And the log file:

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32 armv5tel Debian
Current Operating System: Linux debian 2.6.32-dockstar #2 Mon Sep 6 15:43:50 EDT 2010 armv5tel
Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext2 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
Build Date: 08 September 2010  10:49:52PM
xorg-server 2:1.7.7-6 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.16.4
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct  3 18:03:56 2010
(II) Loader magic: 0x1a8014
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 6.0
        X.Org XInput driver : 7.0
        X.Org Server Extension : 2.0
(--) using VT number 2

List of video drivers:
        displaylink
        mach64
        apm
        ark
        r128
        radeon
        ati
        chips
        cirrus
        neomagic
        i128
        voodoo
        i740
        mga
        rendition
        nv
        s3virge
        s3
        siliconmotion
        savage
        sisusb
        sis
        trident
        tdfx
        tseng
        fbdev
        vesa
(II) LoadModule: "displaylink"
(II) Loading /usr/lib/xorg/modules/drivers/displaylink_drv.so
(II) Module displaylink: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 0.0.1
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "mach64"
(II) Loading /usr/lib/xorg/modules/drivers/mach64_drv.so
(II) Module mach64: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 6.8.2
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "apm"
(II) Loading /usr/lib/xorg/modules/drivers/apm_drv.so
(II) Module apm: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 1.2.2
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "ark"
(II) Loading /usr/lib/xorg/modules/drivers/ark_drv.so
(II) Module ark: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 0.7.2
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "r128"
(II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 6.8.1
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 6.13.1
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 6.13.1
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "chips"
(II) Loading /usr/lib/xorg/modules/drivers/chips_drv.so
(II) Module chips: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.2.3
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "cirrus"
(II) Loading /usr/lib/xorg/modules/drivers/cirrus_drv.so
(II) Module cirrus: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 1.3.2
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "neomagic"
(II) Loading /usr/lib/xorg/modules/drivers/neomagic_drv.so
(II) Module neomagic: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 1.2.4
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "i128"
(II) Loading /usr/lib/xorg/modules/drivers/i128_drv.so
(II) Module i128: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 1.3.3
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "voodoo"
(II) Loading /usr/lib/xorg/modules/drivers/voodoo_drv.so
(II) Module voodoo: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 1.1.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "i740"
(II) Loading /usr/lib/xorg/modules/drivers/i740_drv.so
(II) Module i740: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.3.2
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "mga"
(II) Loading /usr/lib/xorg/modules/drivers/mga_drv.so
(II) Module mga: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.4.11
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "rendition"
(II) Loading /usr/lib/xorg/modules/drivers/rendition_drv.so
(II) Module rendition: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 4.2.3
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 2.1.17
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "s3virge"
(II) Loading /usr/lib/xorg/modules/drivers/s3virge_drv.so
(II) Module s3virge: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 1.10.4
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "s3"
(II) Loading /usr/lib/xorg/modules/drivers/s3_drv.so
(II) Module s3: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 0.6.3
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "siliconmotion"
(II) Loading /usr/lib/xorg/modules/drivers/siliconmotion_drv.so
(II) Module siliconmotion: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 1.7.3
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "savage"
(II) Loading /usr/lib/xorg/modules/drivers/savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 2.3.1
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "sisusb"
(II) Loading /usr/lib/xorg/modules/drivers/sisusb_drv.so
(II) Module sisusb: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 0.9.3
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "sis"
(II) Loading /usr/lib/xorg/modules/drivers/sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 0.10.3
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "trident"
(II) Loading /usr/lib/xorg/modules/drivers/trident_drv.so
(II) Module trident: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 1.3.3
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "tdfx"
(II) Loading /usr/lib/xorg/modules/drivers/tdfx_drv.so
(II) Module tdfx: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 1.4.3
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "tseng"
(II) Loading /usr/lib/xorg/modules/drivers/tseng_drv.so
(II) Module tseng: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 1.1.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 0.4.2
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 2.3.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(WW) Falling back to old probe method for displaylink
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 0.0.2
        ABI class: X.Org Video Driver, version 6.0

Backtrace:
Segmentation fault at address (nil)

Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting


Please consult the The X.Org Foundation support 
         at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

Some more Informations:

"fbset -i"

mode "1920x1080-60"
    # D: 138.504 MHz, H: 66.589 kHz, V: 59.936 Hz
    geometry 1920 1080 1920 1080 16
    timings 7220 80 48 23 3 32 5
    vsync high
    rgba 5/11,6/5,5/0,0/0
endmode

Frame buffer device information:
    Name        : udlfb
    Address     : 0xc8aa2000
    Size        : 4149248
    Type        : PACKED PIXELS
    Visual      : TRUECOLOR
    XPanStep    : 0
    YPanStep    : 0
    YWrapStep   : 0
    LineLength  : 3840
    Accelerator : No

"lsusb"

Bus 001 Device 006: ID 045e:0039 Microsoft Corp. IntelliMouse Optical
Bus 001 Device 005: ID 17e9:0100 Newnham Research 
Bus 001 Device 004: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 003: ID 14cd:125b Super Top 
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

So I just tried to start the server via "start x" and it works. But after a while I discovered plenty of graphical erros and gui artefacts.

Command line after "startx":

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32 armv5tel Debian
Current Operating System: Linux debian 2.6.32-dockstar #2 Mon Sep 6 15:43:50 EDT 2010 armv5tel
Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext2 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
Build Date: 08 September 2010  10:49:52PM
xorg-server 2:1.7.7-6 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.16.4
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct  3 18:10:11 2010
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Primary device is not PCI
SELinux: Disabled on system, not enabling in X server

Any suggestions? I'm puzzled.



Edited 1 time(s). Last edit at 10/03/2010 11:14AM by La_Tristesse.

have u build your own displaylink xorg driver ?
this is nessesary for a good work

I just bought a DsplayLink adapter with DVI to VGA-adapter, but the driver ignore my resolution settings in xorg.conf. The adapter just uses the highes resolution on my screen which makes everything very slow (1680x1050) even in XFCE. how to force DL to use a certain resolution?

My tries with fbset weren't successful at all.

I just installed debian on my dockstar and tried two different displaylink-usb-adapters (samsung u70 and kensington USB-DVI). When I connect one of them, everything seems to work, I get the "green screen" and I can start X. But I do have a strange problem with both of them: Using X after some time I get some "garbled" lines on the screen, which can only be cleard be restarting X. Any suggestions?

Just wanted to say: my "garbled" lines problem is solved! I simply installed the new kernel (2.6.35.7) by gorgone (http://forum.doozan.com/read.php?2,582) and everything works perfectly! Thanks to all who made this possible!