Power saving on your plugs: Pogoplugs V2/V3/V4, Dockstar, GoFlex Home/Net and other Kirkwood NAS boxes October 13, 2018 03:27AM |
Admin Registered: 13 years ago Posts: 19,106 |
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: driver: kirkwood-cpufreq CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 5.0 us. hardware limits: 400 MHz - 1.20 GHz available frequency steps: 1.20 GHz, 400 MHz available cpufreq governors: powersave, userspace, conservative, ondemand, performance current policy: frequency should be within 400 MHz and 1.20 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 400 MHz (asserted by call to hardware).
Martin from Dortmund
Re: Power saving on your plugs: Pogoplugs V2/V3/V4, Dockstar, GoFlex Home/Net October 17, 2018 09:10AM |
Re: Power saving on your plugs: Pogoplugs V2/V3/V4, Dockstar, GoFlex Home/Net October 23, 2018 03:34PM |
Registered: 6 years ago Posts: 23 |
root@debian:~# yes > /dev/null & [1] 1600 root@debian:~# yes > /dev/null & [2] 1601 root@debian:~# yes > /dev/null & [3] 1602 root@debian:~# yes > /dev/null & [4] 1603 root@debian:~# cpufreq-info cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: driver: kirkwood-cpufreq CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 5.0 us. hardware limits: 400 MHz - 1.20 GHz available frequency steps: 1.20 GHz, 400 MHz available cpufreq governors: powersave, userspace, ondemand, conservative, performance current policy: frequency should be within 400 MHz and 1.20 GHz. The governor "conservative" may decide which speed to use within this range. current CPU frequency is 1.20 GHz (asserted by call to hardware).
root@debian:~# kill -SIGSTOP 1600 root@debian:~# kill -SIGSTOP 1601 [1]+ Stopped yes > /dev/null root@debian:~# kill -SIGSTOP 1602 [2]+ Stopped yes > /dev/null root@debian:~# kill -SIGSTOP 1603 [3]+ Stopped yes > /dev/null root@debian:~# kill 1600 [4]+ Stopped yes > /dev/null root@debian:~# cpufreq-info cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: driver: kirkwood-cpufreq CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 5.0 us. hardware limits: 400 MHz - 1.20 GHz available frequency steps: 1.20 GHz, 400 MHz available cpufreq governors: powersave, userspace, ondemand, conservative, performance current policy: frequency should be within 400 MHz and 1.20 GHz. The governor "conservative" may decide which speed to use within this range. current CPU frequency is 400 MHz (asserted by call to hardware).
Re: Power saving on your plugs: Pogoplugs V2/V3/V4, Dockstar, GoFlex Home/Net October 23, 2018 05:53PM |
Admin Registered: 13 years ago Posts: 19,106 |
Re: Power saving on your plugs: Pogoplugs V2/V3/V4, Dockstar, GoFlex Home/Net and other Kirkwood NAS boxes October 29, 2018 01:27PM |
Registered: 6 years ago Posts: 20 |
Re: Power saving on your plugs: Pogoplugs V2/V3/V4, Dockstar, GoFlex Home/Net and other Kirkwood NAS boxes October 29, 2018 04:05PM |
Admin Registered: 13 years ago Posts: 19,106 |
Quote
Tools
Debian hdparm (HDD spin down)
Hard Drive Idle Tool (an alternative to the standard Debian hdparm)
Apt-cache server
Re: Power saving on your plugs: Pogoplugs V2/V3/V4, Dockstar, GoFlex Home/Net and other Kirkwood NAS boxes November 04, 2018 07:46AM |
Registered: 6 years ago Posts: 23 |
Leistung aktuell 5,86W min. 5,79W max. 5,93WPower consumption reduced to 10 % of the one measured for my Linux PC ....