Bricked Goflex Home. Need help August 26, 2021 04:02AM |
Registered: 3 years ago Posts: 28 |
Re: Bricked Goflex Home. Need help August 26, 2021 04:06PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Bricked Goflex Home. Need help August 27, 2021 07:22AM |
Registered: 3 years ago Posts: 28 |
Re: Bricked Goflex Home. Need help August 27, 2021 10:25AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Bricked Goflex Home. Need help August 27, 2021 01:01PM |
Registered: 3 years ago Posts: 28 |
Re: Bricked Goflex Home. Need help August 27, 2021 06:12PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Bricked Goflex Home. Need help August 28, 2021 03:16AM |
Registered: 3 years ago Posts: 28 |
baudrate=115200 loads_echo=0 ipaddr=169.254.254.253 serverip=169.254.254.254 rootpath=/mnt/ARM_FS/ netmask=255.255.0.0 run_diag=yes CASset=min MALLOC_len=1 ethprime=egiga0 bootargs_end=:::DB88FXX81:eth0:none image_name=uImage standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000; ethmtu=1500 usb0Mode=host nandEcc=1bit netretry=no rcvrip=169.254.100.100 loadaddr=0x02000000 autoload=no ethact=egiga0 rtc_mode=active vm_ver_smt=2.0.381 ethaddr=XX:XX:XX:XX:XX:XX explrpk=XXXX-XXXX-XXXX-XXXX explrsn=NA1X0G0A asm1_tag=12:09:10:01:04:46:09 console=console=ttyS0,115200 rtc_tz=PST ntp_default=pool.ntp.org smt_tag=12:09:10:01:04:47:49 stdin=serial stdout=serial stderr=serial mainlineLinux=no enaMonExt=no enaCpuStream=no enaWrAllo=no pexMode=RC disL2Cache=no setL2CacheWT=yes disL2Prefetch=yes enaICPref=yes enaDCPref=yes sata_dma_mode=yes netbsd_en=no vxworks_en=no bootdelay=3 disaMvPnp=no enaAutoRecovery=no pcieTune=no filesize=33AA2E bootargs=console=ttyS0,115200 root=/dev/ram0 rw ramdisk=0x01100000,8M install_type=nand bootargs_root=ubi.mtd=2,2048 root=ubi0:rootfs rootfstype=ubifs init=/linuxrc console2=console=ttyS0,115200 bootcmd=nand read.e 0x800000 0x100000 0x600000; setenv bootargs $(console2) $(bootargs_root); bootm 0x800000Also, My mtd partitions seem to be different from the guide. Here is the output of cat /proc/mtd
dev: size erasesize name mtd0: 00100000 00020000 "u-boot" mtd1: 00600000 00020000 "uImage" mtd2: 0f900000 00020000 "root"
Re: Bricked Goflex Home. Need help August 28, 2021 04:08AM |
Admin Registered: 13 years ago Posts: 18,821 |
mtd0: 00100000 00020000 "u-boot"
Re: Bricked Goflex Home. Need help August 28, 2021 07:13AM |
Registered: 3 years ago Posts: 28 |
Quote
e.2 Box specific envs:
Then for all boxes, restore these 2 envs using the saved envs text in step c (replace xxx with the real saved values)
fw_setenv mtdparts 'xxxxxxxxx' fw_setenv ethaddr 'xx:xx:xx:xx:xx:xx'
Re: Bricked Goflex Home. Need help August 28, 2021 04:32PM |
Admin Registered: 13 years ago Posts: 18,821 |
fw_setenv mtdparts 'mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)'
Re: Bricked Goflex Home. Need help August 29, 2021 05:54PM |
Registered: 3 years ago Posts: 28 |
Re: Bricked Goflex Home. Need help August 29, 2021 09:11PM |
Admin Registered: 13 years ago Posts: 18,821 |
fw_setenv mtdparts 'xxxxxxxxx' fw_setenv ethaddr 'xx:xx:xx:xx:xx:xx' fw_setenv dtb_file '/boot/dts/kirkwood-xxx.dtb'
Re: Bricked Goflex Home. Need help August 30, 2021 07:21AM |
Registered: 3 years ago Posts: 28 |
dev: size erasesize name
Cannot open /dev/mtd0: No such file or directory
Re: Bricked Goflex Home. Need help August 30, 2021 08:58AM |
Registered: 3 years ago Posts: 28 |
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:21:31 -0700) Seagate GoFlex Home SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 0 MiB *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0
Re: Bricked Goflex Home. Need help August 30, 2021 03:58PM |
Admin Registered: 13 years ago Posts: 18,821 |
cat /proc/mtd cat /etc/fw_env.config
Re: Bricked Goflex Home. Need help August 30, 2021 04:31PM |
Registered: 3 years ago Posts: 28 |
dev: size erasesize namecat /etc/fw_env.config
# MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd0 0xc0000 0x20000 0x20000
Re: Bricked Goflex Home. Need help August 30, 2021 04:45PM |
Admin Registered: 13 years ago Posts: 18,821 |
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:21:31 -0700) Seagate GoFlex Home SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 0 MiB
Re: Bricked Goflex Home. Need help August 30, 2021 06:47PM |
Admin Registered: 13 years ago Posts: 18,821 |
[ 10.486787][ T1] nand: second ID read did not match 98,d8 against fd,fd [ 10.493768][ T1] nand: No NAND device found
Re: Bricked Goflex Home. Need help August 31, 2021 12:02AM |
Registered: 3 years ago Posts: 28 |
Re: Bricked Goflex Home. Need help August 31, 2021 12:19AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Bricked Goflex Home. Need help August 31, 2021 04:15AM |
Registered: 3 years ago Posts: 28 |
Re: Bricked Goflex Home. Need help August 31, 2021 04:56PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Bricked Goflex Home. Need help September 05, 2021 10:17AM |
Registered: 3 years ago Posts: 28 |
Re: Bricked Goflex Home. Need help September 05, 2021 04:07PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Bricked Goflex Home. Need help September 05, 2021 04:57PM |
Registered: 3 years ago Posts: 28 |
Re: Bricked Goflex Home. Need help September 05, 2021 05:30PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Bricked Goflex Home. Need help September 05, 2021 11:21PM |
Registered: 3 years ago Posts: 28 |
Re: Bricked Goflex Home. Need help September 06, 2021 02:47AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Bricked Goflex Home. Need help September 06, 2021 05:52AM |
Registered: 3 years ago Posts: 28 |
Re: Bricked Goflex Home. Need help September 06, 2021 04:22PM |
Admin Registered: 13 years ago Posts: 18,821 |