Forum List Message List New Topic
mountainclimber
Exiting. uBoot was not installed "E02 Pogo"
August 17, 2013 02:52PM
Hi-

I can't install uboot on my my E02 pogo. See below 

By typing ok, you agree to assume all liabilities and risks
associated with running this installer.

If you agree, type 'ok' and press ENTER to continue:
Exiting. uBoot was not installed.
-bash-3.2# ls
hbplug.log             resolv.conf            xcehbplug
install_uboot_mtd0.sh  var
-bash-3.2# rm install_uboot_mtd0.sh
-bash-3.2# cd /tmp
-bash-3.2# wget http://jeff.doozan.com/debian/uboot/install_uboot_mtd0.sh
Connecting to jeff.doozan.com (50.116.34.13:80)
install_uboot_mtd0.s 100% |*******************************| 18406  --:--:-- ETA
-bash-3.2# chmod +x install_uboot_mtd0.sh
-bash-3.2# ./install_uboot_mtd0.sh


!!!!!!  DANGER DANGER DANGER DANGER DANGER DANGER  !!!!!!

If you lose power to your device while running this script,
it could be left in an unusable state.

This script will replace the bootloader on /dev/mtd0.

This installer will only work on the following devices:
 Seagate Dockstar
 Seagate GoFlex Net
 Seagate GoFlex Home
 Pogoplug v1
 Pogoplug Pink (v2)
Do not run this installer on any other device.

By typing ok, you agree to assume all liabilities and risks
associated with running this installer.

If you agree, type 'ok' and press ENTER to continue:
Exiting. uBoot was not installed.
-bash-3.2#
Reply Quote
habibie
Re: Exiting. uBoot was not installed "E02 Pogo"
August 17, 2013 03:53PM
I am not sure if you did type 'ok' before you pressed the ENTER key to proceed.

mountainclimber Wrote: 
If you agree, type 'ok' and press ENTER to continue:
Exiting. uBoot was not installed.
-bash-3.2#
Reply Quote
mountainclimber
Re: Exiting. uBoot was not installed "E02 Pogo"
August 17, 2013 04:06PM
wow! LOL i just found that! :) thanks. install worked! e02 black.
Reply Quote
Newer Topic Older Topic
Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: