Welcome! Log In Create A New Profile

Advanced

Autostart after power supply failure 2023.04 U-Boot Kirkwood - ZyXEL NSA325

Posted by alazarski 
Forum List Message List New Topic
alazarski
Autostart after power supply failure 2023.04 U-Boot Kirkwood - ZyXEL NSA325
January 01, 2024 05:04PM
It is any way to set U-Boot 2023.04 that it should start automaticly after power failure or to do nothing after it (waiting for power button press)?
Now I'm away from server and I cannot check it.
Thanks
Reply Quote
bodhi
Re: Autostart after power supply failure 2023.04 U-Boot Kirkwood - ZyXEL NSA325
January 01, 2024 06:43PM
alazarski,


> It is any way to set U-Boot 2023.04 that it should
> start automaticly after power failure or to do
> nothing after it (waiting for power button
> press)?

It is not u-boot specific thing. It's I2C on this box.

See the Wiki thread topic Zyxel NAS325 Auto-Power Up.

https://forum.doozan.com/read.php?2,23630

Quote

Sensors & LEDs & Fan & WOL

OWFSPlug : 1-Wire File System + Motion Detection Software in a NAND Package
OWFS & Motion Detection (external link)
How to control LEDs in Linux userspace
How to control GPIO in Linux userspace for GPIO-enable fan (if it is undefined in DTS)
Zyxel NSA 310S/320S/325/326 CPU Temperature and Fan Speed reading
Zyxel NAS326 WOL
Zyxel NAS325 Auto-Power Up
Zyxel NAS326 WOL and Auto-Power Up I2C commands
Zyxel NSA320 Auto-Power Up
Setup lm-sensors (example for Lenovo IX2 DL fan control in Debian)

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)



Edited 1 time(s). Last edit at 01/01/2024 08:08PM by bodhi.
Reply Quote
alazarski
Re: Autostart after power supply failure 2023.04 U-Boot Kirkwood - ZyXEL NSA325
January 02, 2024 03:00PM
Thank you for this link. A lot of useful information.
Moreover thank you for your help and for this forum
Reply Quote
Newer Topic Older Topic
Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: