howto write uboot to nand

I thought I should ask before I screw this up. I have a new uboot that I load with kwboot. It works fine and I want to write it to nand. I see many references to write it after loading with tftp but not kwboot. Can I do this? How? This is to a Guruplug.

Richard

You can do this. But first you will need to verify if the Guruplug mtd0 has stock uBoot in the similar way the other plugs have. And flash it in a similar fashion as described in this thread:
http://forum.doozan.com/read.php?2,11663

I don't recall reading about Guruplug in this forum. So I really can't say whether the same procedure will apply. So please use your own judgment.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)