Welcome! Log In Create A New Profile

Advanced

2015.10 U-Boot for Pogoplug V3 (OXNAS OX820)

Posted by bodhi 
Re: 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820)
February 23, 2018 02:40PM
zanyg,

Please post output of

uname -a
flash_erase --version
dpkg -l | grep mtd-utils

The later version of flash_erase seems to give wrong output (I've seen it several times), but it was really working OK.

Since this Pogo V3 series has a rescue mechanism in SATA booting, I would go ahead and flash the u-boot image.

-bodhi
===========================
Forum Wiki
bodhi's corner



Edited 2 time(s). Last edit at 02/23/2018 03:00PM by bodhi.
Re: 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820)
March 21, 2018 08:50PM
Hi Bodhi, thanks again for helping with my SATA , now to continue with my U boot here is where I get stuck:

 
debian login: root
Password: 
Last login: Wed Mar 21 18:29:42 PDT 2018 on ttyS0
Linux debian 4.4.54-oxnas-tld-1 #2 SMP PREEMPT Sat Mar 18 23:09:58 PDT 2017 armv6l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~# cat /etc/fw_env.config 
# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
# pogoplug pro
  /dev/mtd0               0x00100000      0x20000         0x20000
root@debian:~# cat /proc/mtd 
dev:    size   erasesize  name
mtd0: 00e00000 00020000 "boot"
mtd1: 07200000 00020000 "data"
root@debian:~# nanddump --noecc --omitoob -f mtd0  /dev/mtd0
Block size 131072, page size 2048, OOB size 64
Dumping data starting at 0x00000000 and ending at 0x00e00000...
root@debian:~# fw_printenv > current_envs.txt
root@debian:~# dmesg | grep -i 'bad'
[    1.668702] Scanning device for bad blocks
[    1.689141] Bad eraseblock 249 at 0x000001f20000
root@debian:~# cd /tmp
root@debian:/tmp# tar -xf uboot.2015.10-tld-2.ox820.bodhi.tar
tar: uboot.2015.10-tld-2.ox820.bodhi.tar: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
root@debian:/tmp#

I see I have a few issues here, not sure about bad block for 1 and I am doing the tar obviously wrong:)

Thanks Echowarrior108



Edited 1 time(s). Last edit at 03/21/2018 09:04PM by echowarrior108.
Re: 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820)
March 21, 2018 09:15PM
1. That bad block 249 is ok.

2. You need to dowload the tarball as instructed in the 1st post:

Quote

Download U-Boot image at Dropbox

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820)
March 21, 2018 09:35PM
Bodhi, I have the download but not sure how to install, do I need it on the usb or can I install from my pc?


here is the ls from the rootfs :
]
root@debian:/# ls
.
..
TEMP
bin
boot
config-4.4.89-oxnas-tld-1
dev
etc
home
lib
linux-4.4.89-oxnas-tld-1.patch
linux-dtb-4.4.89-oxnas-tld-1.tar
linux-headers-4.4.89-oxnas-tld-1_1.0_armel.deb
linux-image-4.4.89-oxnas-tld-1_1.0_armel.deb
lost+found
media
mnt
opt
proc
root
run
sbin
srv
sys
tmp
uboot.2015.10-tld-2.ox820.bodhi.tar
uboot.2015.10-tld-2.ox820.environment
uboot.2015.10-tld-2.ox820.environment.img
uboot.2015.10-tld-2.ox820.mtd0.img
uboot.spl.2013.10.ox820.850mhz.mtd0.img
usr
var
zImage-4.4.89-oxnas-tld-1
root@debian:/#


update, just after I posted this I noticed that the uboot files ended up in the main folder instead of /tmp, I was able to simply run them from the main folder and had success!!!!!!

# picocom -b 115200 /dev/ttyUSB0
picocom v2.2

port is        : /dev/ttyUSB0
flowcontrol    : none
baudrate is    : 115200
parity is      : none
databits are   : 8
stopbits are   : 1
escape is      : C-a
local echo is  : no
noinit is      : no
noreset is     : no
nolock is      : no
send_cmd is    : sz -vv
receive_cmd is : rz -vv -E
imap is        : 
omap is        : 
emap is        : crcrlf,delbs,

Type [C-a] [C-h] to see available commands

Terminal ready
3 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found

Reset IDE: 
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12)
  Boot device: NAND
Attempting to set PLLA to 850 MHz ...
  plla_ctrl0 : 0000020a
  plla_ctrl1 : 00330000
  plla_ctrl2 : 0065008b
  plla_ctrl3 : 000000f1

PLLA Set


U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700)
OXNAS OX820

DRAM:  128 MiB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Net:   dwmac.40400000
Hit any key to stop autoboot:  0 
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found

Reset IDE: SATA PHY not ready for device 0
ide_preinit failed

Partition Map for USB device 0  --   Partition Type: DOS

Part	Start Sector	Num Sectors	UUID		Type
  1	2048      	15630336  	4f02bf5a-01	83 Boot
loading envs from usb 0 ...
** File not found /boot/uEnv.txt **

no IDE devices available
running scan_disk ...
Scan device usb
device usb 0:1
1 bytes read in 221 ms (0 Bytes/s)
Found bootable drive on usb 0
loading uImage ...
4621824 bytes read in 526 ms (8.4 MiB/s)
loading uInitrd ...
4594376 bytes read in 564 ms (7.8 MiB/s)
loading DTB /boot/dts/ox820-pogoplug-pro.dtb ...
7067 bytes read in 259 ms (26.4 KiB/s)
## Booting kernel from Legacy Image at 60500000 ...
   Image Name:   Linux-4.4.117-oxnas-tld-1
   Created:      2018-03-21   1:30:52 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4621760 Bytes = 4.4 MiB
   Load Address: 60008000
   Entry Point:  60008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 60e00000 ...
   Image Name:   initramfs-4.4.117-oxnas-tld-1
   Created:      2018-03-21   1:32:26 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    4594312 Bytes = 4.4 MiB
   Load Address: 60000000
   Entry Point:  60000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 62c00000
   Booting using the fdt blob at 0x62c00000
   Loading Kernel Image ... OK
   Loading Ramdisk to 679c5000, end 67e26a88 ... OK
   Loading Device Tree to 679c0000, end 679c4b9a ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.4.54-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #2 SMP PREEMPT Sat Mar 18 23:09:58 PDT 2017
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Pogoplug V3 Pro
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[    0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand:14m(boot),-(data)
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 116204K/131072K available (6410K kernel code, 288K rwdata, 1908K rodata, 224K init, 247K bss, 14868K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0827e14   (8320 kB)
[    0.000000]       .init : 0xc0828000 - 0xc0860000   ( 224 kB)
[    0.000000]       .data : 0xc0860000 - 0xc08a8378   ( 289 kB)
[    0.000000]        .bss : 0xc08a8378 - 0xc08e6350   ( 248 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:160
[    0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[    0.000010] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[    0.000163] Console: colour dummy device 80x30
[    0.000197] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[    0.050019] pid_max: default: 32768 minimum: 301
[    0.050186] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.050204] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.051023] Initializing cgroup subsys net_cls
[    0.051105] CPU: Testing write buffer coherency: ok
[    0.051530] Setting up static identity map for 0x60008220 - 0x60008258
[    0.190136] Brought up 2 CPUs
[    0.190159] SMP: Total of 2 processors activated (678.29 BogoMIPS).
[    0.190945] devtmpfs: initialized
[    0.196339] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.196385] futex hash table entries: 512 (order: 2, 16384 bytes)
[    0.196700] prandom: seed boundary self test passed
[    0.201116] prandom: 100 self tests passed
[    0.201144] pinctrl core: initialized pinctrl subsystem
[    0.201943] NET: Registered protocol family 16
[    0.202501] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.230021] cpuidle: using governor ladder
[    0.260014] cpuidle: using governor menu
[    0.265216] gpio-oxnas 44000000.gpio: at address c8848000
[    0.265607] gpio-oxnas 44100000.gpio: at address c884a000
[    0.266158] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[    0.389219] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5
[    0.389337] oxnas-pcie 47c00000.pcie-controller: link up
[    0.389655] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00
[    0.389683] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[    0.389701] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[    0.389719] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
[    0.389736] pci_bus 0000:00: root bus resource [bus 00-7f]
[    0.390341] PCI: bus0: Fast back to back transfers disabled
[    0.390430] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4800ffff]
[    0.390891] vgaarb: loaded
[    0.391383] SCSI subsystem initialized
[    0.392243] usbcore: registered new interface driver usbfs
[    0.392350] usbcore: registered new interface driver hub
[    0.392506] usbcore: registered new device driver usb
[    0.392727] pps_core: LinuxPPS API ver. 1 registered
[    0.392742] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.392791] PTP clock support registered
[    0.394951] clocksource: Switched to clocksource rps_clocksource_timer
[    0.413424] NET: Registered protocol family 2
[    0.414320] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.414361] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    0.414397] TCP: Hash tables configured (established 1024 bind 1024)
[    0.414497] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.414543] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.414812] NET: Registered protocol family 1
[    0.415349] RPC: Registered named UNIX socket transport module.
[    0.415370] RPC: Registered udp transport module.
[    0.415380] RPC: Registered tcp transport module.
[    0.415390] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.415787] Unpacking initramfs...
[    0.890467] Freeing initrd memory: 4488K (c79c5000 - c7e27000)
[    0.891947] Initialise system trusted keyring
[    0.905070] zbud: loaded
[    0.910456] NFS: Registering the id_resolver key type
[    0.910517] Key type id_resolver registered
[    0.910533] Key type id_legacy registered
[    0.910579] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.910604] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.911587] fuse init (API version 7.23)
[    0.913594] Key type big_key registered
[    0.990748] Key type asymmetric registered
[    0.990784] Asymmetric key parser 'x509' registered
[    0.990917] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.990940] io scheduler noop registered
[    0.990960] io scheduler deadline registered
[    0.991022] io scheduler cfq registered (default)
[    0.991700] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.993274] console [ttyS0] disabled
[    0.993374] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
[    1.576570] console [ttyS0] enabled
[    1.591482] loop: module loaded
[    1.596587] scsi host0: sata_oxnas
[    1.600473] ata1: SATA max UDMA/133 irq 7
[    1.604567] sata_oxnas: resetting SATA core
[    1.605649] nand: Could not find valid ONFI parameter page; aborting
[    1.605690] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[    1.605696] nand: Hynix NAND 128MiB 3,3V 8-bit
[    1.605703] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.605721] Scanning device for bad blocks
[    1.625676] Bad eraseblock 249 at 0x000001f20000
[    1.687449] 2 cmdlinepart partitions found on MTD device 41000000.nand
[    1.693977] Creating 2 MTD partitions on "41000000.nand":
[    1.699358] 0x000000000000-0x000000e00000 : "boot"
[    1.706124] 0x000000e00000-0x000008000000 : "data"
[    1.713497] oxnas-gmac 40400000.ethernet: no reset control found
[    1.719482] stmmac - user ID: 0x12, Synopsys ID: 0x35
[    1.724554]  Ring mode enabled
[    1.727595]  DMA HW capability register supported
[    1.732126]  Enhanced/Alternate descriptors
[    1.736458] 	Enabled extended descriptors
[    1.740464]  RX Checksum Offload Engine supported (type 2)
[    1.745922]  TX Checksum insertion supported
[    1.750184]  Wake-Up On Lan supported
[    1.753830]  Enable RX Mitigation via HW Watchdog Timer
[    1.784750] libphy: stmmac: probed
[    1.788144] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[    1.794606] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[    1.801346] PPP generic driver version 2.4.2
[    1.806026] rt2800pci 0000:00:00.0: enabling device (0140 -> 0142)
[    1.812428] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3090, rev 3213 detected
[    1.823631] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[    1.832852] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.839365] ehci-pci: EHCI PCI platform driver
[    1.844259] oxnas-ehci 40200100.ehci: EHCI Host Controller
[    1.849758] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[    1.857623] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
[    1.880002] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[    1.886312] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.893117] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.900336] usb usb1: Product: EHCI Host Controller
[    1.905195] usb usb1: Manufacturer: Linux 4.4.54-oxnas-tld-1 ehci_hcd
[    1.911626] usb usb1: SerialNumber: 40200100.ehci
[    1.917317] hub 1-0:1.0: USB hub found
[    1.921175] hub 1-0:1.0: 2 ports detected
[    1.926320] usbcore: registered new interface driver cdc_acm
[    1.932016] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.940134] usbcore: registered new interface driver cdc_wdm
[    1.945937] usbcore: registered new interface driver usb-storage
[    1.952153] usbcore: registered new interface driver usbserial
[    1.958018] usbcore: registered new interface driver usbserial_generic
[    1.964615] usbserial: USB Serial support registered for generic
[    1.971087] mousedev: PS/2 mouse device common for all mice
[    1.976811] i2c /dev entries driver
[    1.981698] hidraw: raw HID events driver (C) Jiri Kosina
[    1.987322] usbcore: registered new interface driver usbhid
[    1.992929] usbhid: USB HID core driver
[    1.998796] NET: Registered protocol family 10
[    2.010158] ata1: SATA link down (SStatus 0 SControl 310)
[    2.020945] sit: IPv6 over IPv4 tunneling driver
[    2.026560] NET: Registered protocol family 17
[    2.031260] Key type dns_resolver registered
[    2.036915] registered taskstats version 1
[    2.041080] Loading compiled-in X.509 certificates
[    2.045967] zswap: loaded using pool lzo/zbud
[    2.064947] Key type encrypted registered
[    2.072102] Freeing unused kernel memory: 224K (c0828000 - c0860000)
Loading, please wait...
[    2.240051] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
starting version 232
[    2.256634] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.267914] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.268971] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.271280] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.271464] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.272624] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.273684] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.277739] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.278760] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.279715] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.442078] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    2.448768] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.480204] usb 1-1: Product: USB2.0 Hub
[    2.492039] hub 1-1:1.0: USB hub found
[    2.500213] hub 1-1:1.0: 4 ports detected
[    2.586283] rt2800pci 0000:00:00.0 wlp0s0: renamed from wlan0
[    2.800145] usb 1-1.3: new high-speed USB device number 3 using oxnas-ehci
[    2.931151] usb 1-1.3: New USB device found, idVendor=0781, idProduct=5530
[    2.938007] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.945331] usb 1-1.3: Product: Cruzer
[    2.949066] usb 1-1.3: Manufacturer: SanDisk
[    2.953359] usb 1-1.3: SerialNumber: 20053248121181F0AC47
[    2.960227] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[    2.967045] scsi host1: usb-storage 1-1.3:1.0
[    2.986777] usbcore: registered new interface driver uas
Begin: Loading essential drivers ... done.
[    3.971261] scsi 1:0:0:0: Direct-Access     SanDisk  Cruzer           1.20 PQ: 0 ANSI: 5
[    3.987658] sd 1:0:0:0: [sda] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[    3.997388] sd 1:0:0:0: [sda] Write Protect is off
[    4.007508] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.027438]  sda: sda1
[    4.041889] sd 1:0:0:0: [sda] Attached SCSI removable disk
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.29.2
[/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1 
rootfs: recovering journal
rootfs: clean, 14035/488640 files, 181527/1953792 blocks
done.
[   13.410416] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232
. ok 
[ ok ] Synthesizing the initial hotplug events...done.
[ ok ] Waiting for /dev to be fully populated...done.
[ ok ] Activating swap...done.
[   17.422397] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   17.962972] random: nonblocking pool is initialized
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.29.2
done.
[ ok ] Loading kernel modules...done.
[ ok ] Cleaning up temporary files... /tmp.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables...done.
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5
Copyright 2004-2016 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/edited for security
Sending on   LPF/eth0/edited for security
Sending on   Socket/fallback
DHCPREQUEST of 192.edited for security on eth0 to 255.255.255.255 port 67
[   26.130150] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
DHCPREQUEST of 192.edited for security  on eth0 to 255.255.255.255 port 67
DHCPACK of 192.edited for security  from 192.edited for security 
bound to 192.edited for security -- renewal in 16565 seconds.
done.
[ ok ] Starting RPC port mapper daemon: rpcbind.
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1245 (syslogd)
. ok 
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Starting system message bus: dbus.
[ ok ] Starting OpenBSD Secure Shell server: sshd.
[ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1244 (klogd)
. ok 
[ ok ] Starting NTP server: ntpd.

Debian GNU/Linux 9 debian ttyS0

debian login: root
Password: 
Last login: Wed Mar 21 20:46:45 PDT 2018 on ttyS0
Linux debian 4.4.54-oxnas-tld-1 #2 SMP PREEMPT Sat Mar 18 23:09:58 PDT 2017 armv6l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~#

this was after reboot with sata removed:)

Thanks !!!!!

Echowarrior108



Edited 2 time(s). Last edit at 03/21/2018 09:58PM by echowarrior108.
Re: 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820)
March 21, 2018 11:06PM
Last post moved here:
https://forum.doozan.com/read.php?3,55194

-bodhi
===========================
Forum Wiki
bodhi's corner
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: