Welcome! Log In Create A New Profile

Advanced

New uBoot for KD20 (OXNAS PLX 7821) [Dev]

Posted by Peacemaker 
Re: New uBoot for KD20 (OXNAS PLX 7821) [Dev]
March 30, 2016 03:39AM
xander Wrote:
-------------------------------------------------------
> ok, perhaps I do not understand correctly; the
> rootfs is loaded by the kernel, not uboot,
> so why not flash a card-reader-working kernel to
> nand and keep the vendor u-boot.

Besides I have no "card-reader-working" kernel, that is working.

But the vendor u-boot can only load the kernel/initrd from nand or an ext2 partition on sata.
Further you can't overclock the chip and you need an "old style" uImage.

An other thing what would be great: a working uboot from sata that you don't have to handle with flashing nand, but either it's not working at all or only one sata working.

> wrt the card reader: did you try and disable Etron
> USB 3 in the kernel (or as module)? Card reader
> seems to be connected to the Genesys IC, not the
> Etron

to USB 3.0:
+ system is stable with and without the module.
+ With the loaded kernel modul: you can see USB-flash drives, but you can't write or read data. If you try either I/O error or Kernel-panic.
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: