|
PogoV4 not booting and no ethernet connection July 27, 2015 12:18AM |
Registered: 9 years ago Posts: 14 |
|
Re: PogoV4 not booting and no ethernet connection July 27, 2015 01:09AM |
Admin Registered: 13 years ago Posts: 19,092 |
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sdd1 rootdelay=30 rootfstype=ext3 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)
[ 13.684757] scsi 0:0:0:0: Direct-Access PNY USB 2.0 FD 1100 PQ: 0 ANSI: 4then that root device should be /dev/sda1
root=LABEL=rootfs
printenv- Post the listing of your envs here and I'll show how to fix it, if you're not sure how.
|
Re: PogoV4 not booting and no ethernet connection July 27, 2015 09:15AM |
Registered: 9 years ago Posts: 14 |
|
Re: PogoV4 not booting and no ethernet connection July 27, 2015 03:09PM |
Admin Registered: 13 years ago Posts: 19,092 |
|
Re: PogoV4 not booting and no ethernet connection July 28, 2015 08:17AM |
Registered: 9 years ago Posts: 14 |
SoC: Kirkwood 88F6192_A1
DRAM: 128 MiB
WARNING: Caches not enabled
NAND: 128 MiB
MMC: kwsdio: 0
In: serial
Out: serial
Err: serial
Net: egiga0
Using egiga0 device
ping failed; host 192.168.0.1 is not alive
Hit any key to stop autoboot: 5 4 3 2 1 0
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
4075744 bytes read in 438 ms (8.9 MiB/s)
** File not found /boot/uInitrd **
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux-4.0.4-1-ARCH
Created: 2015-05-18 8:08:49 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4075680 Bytes = 3.9 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
Using machid 0xf78 from environment
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.4-1-ARCH (builduser@leming) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 PREEMPT Mon May 18 02:08:33 MDT 2015
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Pogoplug V4
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32480
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=30 rootfstype=ext3 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 120940K/131072K available (5755K kernel code, 331K rwdata, 1756K rodata, 260K init, 698K bss, 10132K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc075e108 (7513 kB)
[ 0.000000] .init : 0xc075f000 - 0xc07a0000 ( 260 kB)
[ 0.000000] .data : 0xc07a0000 - 0xc07f2edc ( 332 kB)
[ 0.000000] .bss : 0xc07f2edc - 0xc08a1994 ( 699 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:114
[ 0.000021] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns
[ 3.617701] Console: colour dummy device 80x30
[ 3.617742] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[ 3.707528] pid_max: default: 32768 minimum: 301
[ 3.707662] Security Framework initialized
[ 3.707792] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 3.707822] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 3.708863] Initializing cgroup subsys blkio
[ 3.708910] Initializing cgroup subsys memory
[ 3.709007] Initializing cgroup subsys devices
[ 3.709054] Initializing cgroup subsys freezer
[ 3.709092] Initializing cgroup subsys net_cls
[ 3.709125] Initializing cgroup subsys bfqio
[ 3.709158] Initializing cgroup subsys perf_event
[ 3.709192] Initializing cgroup subsys net_prio
[ 3.709331] CPU: Testing write buffer coherency: ok
[ 3.709993] Setting up static identity map for 0x57bb10 - 0x57bb68
[ 3.712797] devtmpfs: initialized
[ 3.717160] pinctrl core: initialized pinctrl subsystem
[ 3.718282] NET: Registered protocol family 16
[ 3.719030] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 3.747556] cpuidle: using governor ladder
[ 3.777549] cpuidle: using governor menu
[ 3.777795] Kirkwood: MV88F6281-A1, TCLK=166666667.
[ 3.777835] Feroceon L2: Enabling L2
[ 3.777889] Feroceon L2: Cache support initialised.
[ 3.781271] Kirkwood PCIe port 0: link up
[ 3.781287] PCI: bus0 uses PCIe port 0
[ 3.781629] PCI host bridge to bus 0000:00
[ 3.781657] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 3.781675] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
[ 3.781691] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 3.782798] PCI: bus0: Fast back to back transfers disabled
[ 3.782876] pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit]
[ 3.782910] pci 0000:00:01.0: BAR 2: assigned [mem 0xe0010000-0xe0010fff 64bit]
[ 3.782940] pci 0000:00:01.0: BAR 4: assigned [mem 0xe0011000-0xe0011fff 64bit]
[ 3.819669] vgaarb: loaded
[ 3.820147] SCSI subsystem initialized
[ 3.820890] usbcore: registered new interface driver usbfs
[ 3.821005] usbcore: registered new interface driver hub
[ 3.821094] usbcore: registered new device driver usb
[ 3.821349] pps_core: LinuxPPS API ver. 1 registered
[ 3.821361] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.821418] PTP clock support registered
[ 3.823020] Switched to clocksource orion_clocksource
[ 3.849101] FS-Cache: Loaded
[ 3.867854] NET: Registered protocol family 2
[ 3.869105] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 3.869147] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 3.869176] TCP: Hash tables configured (established 1024 bind 1024)
[ 3.869275] TCP: reno registered
[ 3.869293] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 3.869325] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 3.869580] NET: Registered protocol family 1
[ 3.869700] pci 0000:00:01.0: enabling device (0140 -> 0142)
[ 3.872285] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 3.891121] VFS: Disk quotas dquot_6.5.2
[ 3.891505] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.894347] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 3.895900] fuse init (API version 7.23)
[ 3.899235] aufs 4.0-20150511
[ 3.902152] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 3.902183] io scheduler noop registered
[ 3.902204] io scheduler deadline registered
[ 3.902567] io scheduler cfq registered
[ 3.903354] io scheduler bfq registered (default)
[ 3.903368] BFQ I/O-scheduler version: v7r7
[ 3.903698] mv_xor mv_xor.0: Marvell shared XOR driver
[ 3.943163] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 3.983145] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 3.983424] mv_xor mv_xor.1: Marvell shared XOR driver
[ 4.023125] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 4.063123] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 4.071067] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 4.072682] console [ttyS0] disabled
[ 4.092777] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
[ 4.661318] console [ttyS0] enabled
[ 4.684877] brd: module loaded
[ 4.697181] loop: module loaded
[ 4.700855] sata_mv sata_mv.0: cannot get optional clkdev
[ 4.706429] sata_mv sata_mv.0: slots 32 ports 1
[ 4.713569] scsi host0: sata_mv
[ 4.717269] ata1: SATA max UDMA/133 irq 21
[ 4.722534] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[ 4.728911] nand: Hynix H27U1G8F2BTR-BC
[ 4.732735] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 4.740335] Scanning device for bad blocks
[ 4.828364] 5 cmdlinepart partitions found on MTD device orion_nand
[ 4.834628] Creating 5 MTD partitions on "orion_nand":
[ 4.839756] 0x000000000000-0x000000200000 : "u-boot"
[ 4.845450] 0x000000200000-0x000000500000 : "uImage"
[ 4.850992] 0x000000500000-0x000000800000 : "uImage2"
[ 4.856653] 0x000000800000-0x000001000000 : "failsafe"
[ 4.862369] 0x000001000000-0x000008000000 : "root"
[ 4.877132] libphy: orion_mdio_bus: probed
[ 4.881368] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 5.063092] ata1: SATA link down (SStatus 0 SControl F300)
[ 5.967322] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:05:f4:98
[ 5.976395] xhci_hcd 0000:00:01.0: xHCI Host Controller
[ 5.981638] xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 1
[ 5.990356] xhci_hcd 0000:00:01.0: hcc params 0x200073a1 hci version 0x100 quirks 0x00000010
[ 6.000252] hub 1-0:1.0: USB hub found
[ 6.004105] hub 1-0:1.0: 2 ports detected
[ 6.008999] xhci_hcd 0000:00:01.0: xHCI Host Controller
[ 6.014296] xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2
[ 6.023085] hub 2-0:1.0: USB hub found
[ 6.026866] hub 2-0:1.0: 2 ports detected
[ 6.031879] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.038460] ehci-pci: EHCI PCI platform driver
[ 6.042995] ehci-orion: EHCI orion driver
[ 6.047162] orion-ehci orion-ehci.0: EHCI Host Controller
[ 6.052577] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 3
[ 6.060334] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 6.083066] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 6.090336] hub 3-0:1.0: USB hub found
[ 6.094203] hub 3-0:1.0: 1 port detected
[ 6.099044] usbcore: registered new interface driver uas
[ 6.104795] usbcore: registered new interface driver usb-storage
[ 6.110864] usbcore: registered new interface driver ums-alauda
[ 6.116913] usbcore: registered new interface driver ums-cypress
[ 6.122998] usbcore: registered new interface driver ums-datafab
[ 6.129236] usbcore: registered new interface driver ums_eneub6250
[ 6.135508] usbcore: registered new interface driver ums-freecom
[ 6.141578] usbcore: registered new interface driver ums-isd200
[ 6.147583] usbcore: registered new interface driver ums-jumpshot
[ 6.153757] usbcore: registered new interface driver ums-karma
[ 6.159650] usbcore: registered new interface driver ums-onetouch
[ 6.165876] usbcore: registered new interface driver ums-realtek
[ 6.171939] usbcore: registered new interface driver ums-sddr09
[ 6.177946] usbcore: registered new interface driver ums-sddr55
[ 6.183948] usbcore: registered new interface driver ums-usbat
[ 6.190399] mousedev: PS/2 mouse device common for all mice
[ 6.343275] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 6.365105] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 6.371585] scsi host1: usb-storage 2-1:1.0
[ 6.413119] usb 3-1: new high-speed USB device number 2 using orion-ehci
[ 6.571866] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 6.578389] scsi host2: usb-storage 3-1:1.0
[ 7.203058] rtc-mv rtc-mv: internal RTC not ticking
[ 7.208136] i2c /dev entries driver
[ 7.212355] Driver 'mmcblk' needs updating - please use bus_type methods
[ 7.219231] sdhci: Secure Digital Host Controller Interface driver
[ 7.225413] sdhci: Copyright(c) Pierre Ossman
[ 7.263347] sdhci-pltfm: SDHCI platform and OF driver helper
[ 7.272882] ledtrig-cpu: registered to indicate activity on CPUs
[ 7.279164] usbcore: registered new interface driver r8712u
[ 7.285106] gre: GRE over IPv4 demultiplexor driver
[ 7.290029] TCP: cubic registered
[ 7.293425] NET: Registered protocol family 17
[ 7.298066] Key type dns_resolver registered
[ 7.304956] registered taskstats version 1
[ 7.310996] console [netcon0] enabled
[ 7.314748] netconsole: network logging started
[ 7.319935] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 7.327116] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 7.334996] Waiting 30 sec before mounting root device...
[ 7.585253] scsi 2:0:0:0: Direct-Access JetFlash Transcend 16GB 8.07 PQ: 0 ANSI: 2
[ 7.595389] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 7.601325] sd 2:0:0:0: [sda] 31444992 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 7.609635] sd 2:0:0:0: [sda] Write Protect is off
[ 7.615010] sd 2:0:0:0: [sda] No Caching mode page found
[ 7.620324] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 7.631744] sda: sda1
[ 7.637388] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 7.731056] scsi 1:0:0:0: Direct-Access WD My Passport 07A8 1033 PQ: 0 ANSI: 6
[ 7.740576] sd 1:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
[ 7.748751] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 7.754452] sd 1:0:0:0: [sdb] Write Protect is off
[ 7.760218] scsi 1:0:0:1: Enclosure WD SES Device 1033 PQ: 0 ANSI: 6
[ 7.768337] sd 1:0:0:0: [sdb] No Caching mode page found
[ 7.773939] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 7.782549] scsi 1:0:0:1: Attached scsi generic sg2 type 13
[ 7.804984] sdb: sdb1
[ 7.809642] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 37.344906] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 42.144643] sd 2:0:0:0: [sda] UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 42.152318] sd 2:0:0:0: [sda] Sense Key : 0x2 [current]
[ 42.157647] sd 2:0:0:0: [sda] <<vendor>>ASC=0xff <<vendor>>ASCQ=0xff
[ 42.164108] sd 2:0:0:0: [sda] CDB: opcode=0x2a 2a 00 01 b4 01 10 00 00 08 00
[ 42.171150] blk_update_request: I/O error, dev sda, sector 28573968
[ 42.177414] Buffer I/O error on dev sda1, logical block 3571714, lost async page write
[ 42.186246] sd 2:0:0:0: [sda] UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 42.193910] sd 2:0:0:0: [sda] Sense Key : 0x7 [current]
[ 42.199209] sd 2:0:0:0: [sda] ASC=0x27 ASCQ=0x0
[ 42.203852] sd 2:0:0:0: [sda] CDB: opcode=0x2a 2a 00 01 b4 01 38 00 00 08 00
[ 42.210891] blk_update_request: critical target error, dev sda, sector 28574008
[ 42.218206] Buffer I/O error on dev sda1, logical block 3571719, lost async page write
[ 42.227120] sd 2:0:0:0: [sda] UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 42.234785] sd 2:0:0:0: [sda] Sense Key : 0x7 [current]
[ 42.240076] sd 2:0:0:0: [sda] ASC=0x27 ASCQ=0x0
[ 42.244721] sd 2:0:0:0: [sda] CDB: opcode=0x2a 2a 00 00 10 01 10 00 00 08 00
[ 42.251767] blk_update_request: critical target error, dev sda, sector 1048848
[ 42.258996] Buffer I/O error on dev sda1, logical block 131074, lost async page write
[ 42.267745] sd 2:0:0:0: [sda] UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 42.275412] sd 2:0:0:0: [sda] Sense Key : 0x7 [current]
[ 42.280711] sd 2:0:0:0: [sda] ASC=0x27 ASCQ=0x0
[ 42.285350] sd 2:0:0:0: [sda] CDB: opcode=0x2a 2a 00 01 b4 03 90 00 00 08 00
[ 42.292392] blk_update_request: critical target error, dev sda, sector 28574608
[ 42.299708] Buffer I/O error on dev sda1, logical block 3571794, lost async page write
[ 42.308756] sd 2:0:0:0: [sda] UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 42.316417] sd 2:0:0:0: [sda] Sense Key : 0x7 [current]
[ 42.321716] sd 2:0:0:0: [sda] ASC=0x27 ASCQ=0x0
[ 42.326356] sd 2:0:0:0: [sda] CDB: opcode=0x2a 2a 00 01 bc 01 10 00 00 c8 00
[ 42.333410] blk_update_request: critical target error, dev sda, sector 29098256
[ 42.340708] Buffer I/O error on dev sda1, logical block 3637250, lost async page write
[ 42.348619] Buffer I/O error on dev sda1, logical block 3637251, lost async page write
[ 42.356536] Buffer I/O error on dev sda1, logical block 3637252, lost async page write
[ 42.364445] Buffer I/O error on dev sda1, logical block 3637253, lost async page write
[ 42.372331] Buffer I/O error on dev sda1, logical block 3637254, lost async page write
[ 42.380240] Buffer I/O error on dev sda1, logical block 3637255, lost async page write
[ 42.389239] sd 2:0:0:0: [sda] UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 42.396898] sd 2:0:0:0: [sda] Sense Key : 0x7 [current]
[ 42.402197] sd 2:0:0:0: [sda] ASC=0x27 ASCQ=0x0
[ 42.406842] sd 2:0:0:0: [sda] CDB: opcode=0x2a 2a 00 01 bc 01 e0 00 00 08 00
[ 42.413900] blk_update_request: critical target error, dev sda, sector 29098464
[ 42.422120] sd 2:0:0:0: [sda] UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 42.429783] sd 2:0:0:0: [sda] Sense Key : 0x7 [current]
[ 42.435102] sd 2:0:0:0: [sda] ASC=0x27 ASCQ=0x0
[ 42.439726] sd 2:0:0:0: [sda] CDB: opcode=0x2a 2a 00 00 2c 01 10 00 00 08 00
[ 42.446775] blk_update_request: critical target error, dev sda, sector 2883856
[ 42.454996] sd 2:0:0:0: [sda] UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 42.462641] sd 2:0:0:0: [sda] Sense Key : 0x7 [current]
[ 42.467963] sd 2:0:0:0: [sda] ASC=0x27 ASCQ=0x0
[ 42.472592] sd 2:0:0:0: [sda] CDB: opcode=0x2a 2a 00 01 bc 01 f0 00 00 38 00
[ 42.479651] blk_update_request: critical target error, dev sda, sector 29098480
[ 42.488130] sd 2:0:0:0: [sda] UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 42.495790] sd 2:0:0:0: [sda] Sense Key : 0x7 [current]
[ 42.501083] sd 2:0:0:0: [sda] ASC=0x27 ASCQ=0x0
[ 42.505723] sd 2:0:0:0: [sda] CDB: opcode=0x2a 2a 00 01 bc 02 30 00 00 d0 00
[ 42.512765] blk_update_request: critical target error, dev sda, sector 29098544
[ 42.521119] sd 2:0:0:0: [sda] UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 42.528780] sd 2:0:0:0: [sda] Sense Key : 0x7 [current]
[ 42.534099] sd 2:0:0:0: [sda] ASC=0x27 ASCQ=0x0
[ 42.538722] sd 2:0:0:0: [sda] CDB: opcode=0x2a 2a 00 01 bc 0a a8 00 00 08 00
[ 42.545773] blk_update_request: critical target error, dev sda, sector 29100712
[ 42.560902] JBD2: recovery failed
[ 42.564256] EXT4-fs (sda1): error loading journal
[ 42.570421] ------------[ cut here ]------------
[ 42.575136] WARNING: CPU: 0 PID: 1 at fs/block_dev.c:57 __blkdev_put+0xfc/0x234()
[ 42.582609] Modules linked in:
[ 42.585730] CPU: 0 PID: 1 Comm: swapper Not tainted 4.0.4-1-ARCH #1
[ 42.591990] Hardware name: Pogoplug V4
[ 42.595863] [<c000f040>] (unwind_backtrace) from [<c000c584>] (show_stack+0x10/0x14)
[ 42.603622] [<c000c584>] (show_stack) from [<c001bec8>] (warn_slowpath_common+0x80/0xb8)
[ 42.611700] [<c001bec8>] (warn_slowpath_common) from [<c001bf9c>] (warn_slowpath_null+0x1c/0x24)
[ 42.620483] [<c001bf9c>] (warn_slowpath_null) from [<c014a23c>] (__blkdev_put+0xfc/0x234)
[ 42.628673] [<c014a23c>] (__blkdev_put) from [<c0114e7c>] (deactivate_locked_super+0x50/0x74)
[ 42.637196] [<c0114e7c>] (deactivate_locked_super) from [<c0115980>] (mount_bdev+0x188/0x194)
[ 42.645723] [<c0115980>] (mount_bdev) from [<c01ac980>] (ext4_mount+0x14/0x20)
[ 42.652927] [<c01ac980>] (ext4_mount) from [<c0116520>] (mount_fs+0x44/0x168)
[ 42.660066] [<c0116520>] (mount_fs) from [<c0130e80>] (vfs_kern_mount+0x4c/0x118)
[ 42.667554] [<c0130e80>] (vfs_kern_mount) from [<c013392c>] (do_mount+0x1b8/0xb08)
[ 42.675128] [<c013392c>] (do_mount) from [<c013459c>] (SyS_mount+0x74/0xa0)
[ 42.682074] [<c013459c>] (SyS_mount) from [<c0760114>] (mount_block_root+0x128/0x2c8)
[ 42.689904] [<c0760114>] (mount_block_root) from [<c0760578>] (prepare_namespace+0x160/0x1c0)
[ 42.698420] [<c0760578>] (prepare_namespace) from [<c075fe94>] (kernel_init_freeable+0x1f8/0x244)
[ 42.707297] [<c075fe94>] (kernel_init_freeable) from [<c0571854>] (kernel_init+0x8/0xec)
[ 42.715391] [<c0571854>] (kernel_init) from [<c0009618>] (ret_from_fork+0x14/0x3c)
[ 42.722928] ---[ end trace 68e989ca0e3f8bff ]---
[ 42.730901] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 42.739998] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 42.746928] EXT4-fs (sda1): write access will be enabled during recovery
[ 42.830031] JBD2: recovery failed
[ 42.833407] EXT4-fs (sda1): error loading journal
[ 42.839574] List of all partitions:
[ 42.843168] 0100 8192 ram0 (driver?)
[ 42.847780] 0101 8192 ram1 (driver?)
[ 42.852420] 0102 8192 ram2 (driver?)
[ 42.857086] 0103 8192 ram3 (driver?)
[ 42.861725] 0104 8192 ram4 (driver?)
[ 42.866443] 0105 8192 ram5 (driver?)
[ 42.871054] 0106 8192 ram6 (driver?)
[ 42.875687] 0107 8192 ram7 (driver?)
[ 42.880309] 0108 8192 ram8 (driver?)
[ 42.884940] 0109 8192 ram9 (driver?)
[ 42.889552] 010a 8192 ram10 (driver?)
[ 42.894272] 010b 8192 ram11 (driver?)
[ 42.898970] 010c 8192 ram12 (driver?)
[ 42.903683] 010d 8192 ram13 (driver?)
[ 42.908379] 010e 8192 ram14 (driver?)
[ 42.913091] 010f 8192 ram15 (driver?)
[ 42.917794] 0800 15722496 sda driver: sd
[ 42.922401] 0801 15722368 sda1 00070f89-01
[ 42.927296] 0810 976729088 sdb driver: sd
[ 42.931905] 0811 976728064 sdb1 4a22b6a4-01
[ 42.936790] No filesystem could mount root, tried: ext3
[ 42.942102] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1)
[ 42.950337] CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.0.4-1-ARCH #1
[ 42.957785] Hardware name: Pogoplug V4
[ 42.961553] [<c000f040>] (unwind_backtrace) from [<c000c584>] (show_stack+0x10/0x14)
[ 42.969285] [<c000c584>] (show_stack) from [<c0572264>] (panic+0x88/0x1f8)
[ 42.976145] [<c0572264>] (panic) from [<c076026c>] (mount_block_root+0x280/0x2c8)
[ 42.983603] [<c076026c>] (mount_block_root) from [<c0760578>] (prepare_namespace+0x160/0x1c0)
[ 42.992097] [<c0760578>] (prepare_namespace) from [<c075fe94>] (kernel_init_freeable+0x1f8/0x244)
[ 43.000936] [<c075fe94>] (kernel_init_freeable) from [<c0571854>] (kernel_init+0x8/0xec)
[ 43.008997] [<c0571854>] (kernel_init) from [<c0009618>] (ret_from_fork+0x14/0x3c)
[ 43.016539] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1)
[ 64.773049] random: nonblocking pool is initialized
|
Re: PogoV4 not booting and no ethernet connection July 28, 2015 03:32PM |
Admin Registered: 13 years ago Posts: 19,092 |
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=30 rootfstype=ext3 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=30 rootfstype=ext3 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)
|
Re: PogoV4 not booting and no ethernet connection July 28, 2015 11:15PM |
Registered: 9 years ago Posts: 14 |
U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:59:45)
Pogoplug V4
SoC: Kirkwood 88F6192_A1
DRAM: 128 MiB
WARNING: Caches not enabled
NAND: 128 MiB
MMC: kwsdio: 0
In: serial
Out: serial
Err: serial
Net: egiga0
Using egiga0 device
ping failed; host 192.168.0.1 is not alive
Hit any key to stop autoboot: 5 4 3 2 1 0
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
** File not found /boot/uImage **
** File not found /boot/uInitrd **
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Card did not respond to voltage select!
** Bad device mmc 0 **
** Bad device mmc 0 **
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Reset IDE: ide_preinit failed
** Bad device size - ide 0 **
** Bad device size - ide 0 **
Wrong Image Format for bootm command
ERROR: can't get kernel image!
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: sub-page size: 512
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: attached mtd1 to ubi0
UBI: MTD device name: "mtd=4"
UBI: MTD device size: 112 MiB
UBI: number of good PEBs: 896
UBI: number of bad PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 896
UBI: number of PEBs reserved for bad PEB handling: 8
UBI: max/mean erase counter: 1/0
UBIFS: recovery needed
UBIFS: recovery deferred
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: mounted read-only
UBIFS: file system size: 110850048 bytes (108252 KiB, 105 MiB, 873 LEBs)
UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root: 0 bytes (0 KiB)
** File not found uboot.mtd0.dockstar.original.kwb **
resetting ...
U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:59:45)
Pogoplug V4
SoC: Kirkwood 88F6192_A1
DRAM: 128 MiB
WARNING: Caches not enabled
NAND: 128 MiB
MMC: kwsdio: 0
In: serial
Out: serial
Err: serial
Net: egiga0
Using egiga0 device
ping failed; host 192.168.0.1 is not alive
Hit any key to stop autoboot: 5 4 0
Pogov4> printenv
et_bootargs_usb=setenv bootargs console=ttyS0,115200 root=/dev/sda1 rootdelay=30 rootfstype=ext4 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)
arcNumber=3960
baudrate=115200
bootargs=console=ttyS0,115200 root=/dev/sda1 rootdelay=30 rootfstype=ext4 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)
bootcmd=run bootcmd_usb; run bootcmd_mmc; run bootcmd_sata; run bootcmd_pogo; reset
bootcmd_mmc=run mmc_init; run set_bootargs_mmc; run mmc_boot
bootcmd_pogo=if ubi part root 2048 && ubifsmount ubi:rootfs && ubifsload 0x800000 uboot.mtd0.dockstar.original.kwb ; then go 0x800200; fi
bootcmd_sata=run sata_init; run set_bootargs_sata; run sata_boot;
bootcmd_usb=run usb_init; run set_bootargs_usb; run usb_boot;
bootdelay=5
console=ttyS0,115200
device=0:1
ethact=egiga0
ethaddr=00:25:31:05:f4:98
if_netconsole=ping $serverip
ipaddr=192.168.0.1
led_error=orange blinking
led_exit=green off
led_init=green blinking
machid=F78
mainlineLinux=yes
mmc_boot=mw 0x800000 0 1; run mmc_load_uimage; if run mmc_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi
mmc_init=mmc rescan
mmc_load_uimage=ext2load mmc $device 0x800000 /boot/uImage
mmc_load_uinitrd=ext2load mmc $device 0x1100000 /boot/uInitrd
mmc_root=/dev/mmcblk0p1
mtddevname=uImage2
mtddevnum=2
mtdids=nand0=orion_nand
mtdparts=mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)
partition=nand0,2
preboot=run if_netconsole start_netconsole
preboot_nc=run if_netconsole start_netconsole
rootdelay=30
rootfstype=ext3
sata_boot=mw 0x800000 0 1; run sata_load_uimage; if run sata_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi
sata_init=ide reset
sata_load_uimage=ext2load ide $device 0x800000 /boot/uImage
sata_load_uinitrd=ext2load ide $device 0x1100000 /boot/uInitrd
sata_root=/dev/sda1
serverip=192.168.0.1
set_bootargs=console=ttyS0,115200 root=/dev/sda1 rootdelay=30 rootfstype=ext4 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)
set_bootargs_mmc=setenv bootargs console=$console root=$mmc_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts
set_bootargs_sata=setenv bootargs console=$console root=$sata_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts
set_bootargs_usb=console=ttyS0,115200 root=/dev/sda1 rootdelay=30 rootfstype=ext4 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;
stderr=serial
stdin=serial
stdout=serial
usb_boot=mw 0x800000 0 1; run usb_load_uimage; if run usb_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi
usb_init=usb start
usb_load_uimage=ext2load usb $device 0x800000 /boot/uImage
usb_load_uinitrd=ext2load usb $device 0x1100000 /boot/uInitrd
usb_root=/dev/sda1
usb_rootfstype=ext3
Environment size: 3025/131068 bytes
Pogov4>
|
Re: PogoV4 not booting and no ethernet connection July 29, 2015 12:08AM |
Admin Registered: 13 years ago Posts: 19,092 |
|
Re: PogoV4 not booting and no ethernet connection July 29, 2015 08:00AM |
Registered: 9 years ago Posts: 14 |
|
Re: PogoV4 not booting and no ethernet connection July 29, 2015 02:24PM |
Admin Registered: 13 years ago Posts: 19,092 |
|
Re: PogoV4 not booting and no ethernet connection July 29, 2015 05:39PM |
Registered: 9 years ago Posts: 14 |
|
Re: PogoV4 not booting and no ethernet connection July 29, 2015 05:52PM |
Admin Registered: 13 years ago Posts: 19,092 |
passwd rm /etc/ssh/ssh_host* ssh-keygen -A apt-get update apt-get upgrade
|
Re: PogoV4 not booting and no ethernet connection July 29, 2015 05:54PM |
Admin Registered: 13 years ago Posts: 19,092 |
|
Re: PogoV4 not booting and no ethernet connection July 29, 2015 06:10PM |
Registered: 9 years ago Posts: 14 |
|
Re: PogoV4 not booting and no ethernet connection July 29, 2015 11:37PM |
Registered: 9 years ago Posts: 14 |
Pogov4> printenv et_bootargs_usb=setenv bootargs console=ttyS0,115200 root=/dev/sda1 rootdelay=30 rootfstype=ext4 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root) arcNumber=3960 baudrate=115200 bootargs=console=ttyS0,115200 root=/dev/sda1 rootdelay=30 rootfstype=ext4 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root) bootcmd=run bootcmd_usb; run bootcmd_mmc; run bootcmd_sata; run bootcmd_pogo; reset bootcmd_mmc=run mmc_init; run set_bootargs_mmc; run mmc_boot bootcmd_pogo=if ubi part root 2048 && ubifsmount ubi:rootfs && ubifsload 0x800000 uboot.mtd0.dockstar.original.kwb ; then go 0x800200; fi bootcmd_sata=run sata_init; run set_bootargs_sata; run sata_boot; bootcmd_usb=run usb_init; run set_bootargs_usb; run usb_boot; bootdelay=5 console=ttyS0,115200 device=0:1 ethact=egiga0 ethaddr=00:25:31:05:f4:98 if_netconsole=ping $serverip ipaddr=192.168.0.1 led_error=orange blinking led_exit=green off led_init=green blinking machid=F78 mainlineLinux=yes mmc_boot=mw 0x800000 0 1; run mmc_load_uimage; if run mmc_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi mmc_init=mmc rescan mmc_load_uimage=ext2load mmc $device 0x800000 /boot/uImage mmc_load_uinitrd=ext2load mmc $device 0x1100000 /boot/uInitrd mmc_root=/dev/mmcblk0p1 mtddevname=uImage2 mtddevnum=2 mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root) partition=nand0,2 preboot=run if_netconsole start_netconsole preboot_nc=run if_netconsole start_netconsole rootdelay=5 rootfstype=ext3 sata_boot=mw 0x800000 0 1; run sata_load_uimage; if run sata_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi sata_init=ide reset sata_load_uimage=ext2load ide $device 0x800000 /boot/uImage sata_load_uinitrd=ext2load ide $device 0x1100000 /boot/uInitrd sata_root=/dev/sda1 serverip=192.168.0.1 set_bootargs=console=ttyS0,115200 root=/dev/sda1 rootdelay=30 rootfstype=ext4 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root) set_bootargs_mmc=setenv bootargs console=$console root=$mmc_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts set_bootargs_sata=setenv bootargs console=$console root=$sata_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts set_bootargs_usb=console ttyS0,115200 root /dev/sda1 rootdelay 5 rootfstype ext4 mtdparts orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root) start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial usb_boot=mw 0x800000 0 1; run usb_load_uimage; if run usb_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi usb_init=usb start usb_load_uimage=ext2load usb $device 0x800000 /boot/uImage usb_load_uinitrd=ext2load usb $device 0x1100000 /boot/uInitrd usb_root=/dev/sda1 usb_rootfstype=ext3
|
Re: PogoV4 not booting and no ethernet connection July 30, 2015 03:11AM |
Admin Registered: 13 years ago Posts: 19,092 |
Quote
fw_setenv(8) fw_setenv(8)
NAME
fw_setenv - Tool for modifying the environment for the bootloader U-Boot
SYNOPSIS
fw_setenv name [ value ]
DESCRIPTION
fw_setenv is a simple tool for modifying either the environment for the bootloader U-Boot. If the variable already is set in the environment it is updated, otherwise it is created and set.
If only one argument is given, variable name, the corresponding variable is deleted.
FILES
/etc/fw_env.config
Configuration file for fw_setenv.
SEE ALSO
fw_printenv(8)
AUTHOR
Wolfgang Denk <wd@denx.de>
This manual page was written by Per Andersson <avtobiff@gmail.com>
Debian Project August 2008 fw_setenv(8)