Pogoplug Pink E02 no network January 17, 2016 10:32PM |
Registered: 9 years ago Posts: 29 |
U-Boot 2014.04.R3-1 (May 26 2014 - 19:45:55) Arch Linux ARM Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found no USB devices available no USB devices available no USB devices available no USB devices available PogoE02> printenv baudrate=115200 bootcmd=usb start; setenv letter 9;for type in usb; do for disk in 0 1 2 3; do if ${type} part ${disk};then setexpr letter $letter + 1;run load;fi;done;done; bootdelay=3 bootm=echo Booting from ${disk} ...; run setargs; bootm ${loadaddr}; bootz=echo Booting from ${disk} ...; run setargs; bootz ${loadaddr} - ${fdt_addr}; console=ttyS0 ethact=egiga0 ethaddr=00:25:31:02:21:5C fdt_addr=0x800000 fdt_file=/boot/dtbs/kirkwood-pogo_e02.dtb importbootenv=echo Importing environment (uEnv.txt)...; env import -t $loadaddr $filesize letter=9 load=echo Attempting to boot from ${type} ${disk}:1...;if run loadbootenv; then run importbootenv;fi;echo Checking if uenvcmd is set ...;if test -n $uenvcmd; then echo Running uenvcmd ...;run uenvcmd;fi;echo Running default loadzimage ...;if run loadzimage; then run loadfdt;run bootz;fi;echo Running default loaduimage ...;if run loaduimage; then run bootm;fi; loadaddr=0x810000 loadbootenv=load ${type} ${disk}:1 ${loadaddr} /boot/uEnv.txt loadfdt=load ${type} ${disk}:1 ${fdt_addr} ${fdt_file} loaduimage=load ${type} ${disk}:1 ${loadaddr} ${uimage} loadzimage=load ${type} ${disk}:1 ${loadaddr} ${zimage} mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),-(rootfs) setargs=setenv bootargs console=${console},${baudrate} ${optargs} root=/dev/sd${letter}1 rw rootwait ${mtdparts} uimage=/boot/uImage zimage=/boot/zImage Environment size: 1434/131068 bytes
Re: Pogoplug Pink E02 no network January 17, 2016 11:43PM |
Admin Registered: 13 years ago Posts: 18,580 |
ls -latr /media/sdb1/ ls -latr /media/sdb1/boot
Re: Pogoplug Pink E02 no network January 18, 2016 04:48PM |
Registered: 9 years ago Posts: 29 |
U-Boot 2014.04.R3-1 (May 26 2014 - 19:45:55) Arch Linux ARM Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 34816000 0004553c-01 83 3 34818048 4251648 0004553c-03 82 Attempting to boot from usb 0:1... ** File not found /boot/uEnv.txt ** Checking if uenvcmd is set ... Running default loadzimage ... ** File not found /boot/zImage ** Running default loaduimage ... EHCI timed out on TD - token=0x800d8d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80128d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0xa0008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x801f8c80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x801f8c80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x801f8c80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 ** ext4fs_devread read error - block no USB devices available no USB devices available no USB devices available PogoE02>
> ls -latr /media/sdb1/ > ls -latr /media/sdb1/boot >
zbyszko-EX58-UD4P zbyszko # ls -latr /media/zbyszko/rootfs/ total 237084 drwxr-xr-x 4 root root 4096 Oct 5 15:06 srv lrwxrwxrwx 1 root root 7 Oct 5 15:06 sbin -> usr/bin drwxr-xr-x 2 root root 4096 Oct 5 15:06 opt drwxr-xr-x 2 root root 4096 Oct 5 15:06 mnt lrwxrwxrwx 1 root root 7 Oct 5 15:06 lib -> usr/lib lrwxrwxrwx 1 root root 7 Oct 5 15:06 bin -> usr/bin drwxrwxrwt 2 root root 4096 Jan 4 21:00 tmp dr-xr-xr-x 2 root root 4096 Jan 4 21:00 sys drwxr-xr-x 2 root root 4096 Jan 4 21:00 run dr-xr-xr-x 2 root root 4096 Jan 4 21:00 proc drwxr-xr-x 2 root root 4096 Jan 4 21:00 dev drwxr-xr-x 8 root root 4096 Jan 4 21:00 usr drwxr-xr-x 12 root root 4096 Jan 4 21:00 var drwxr-x--- 3 root root 4096 Jan 4 21:01 root drwxr-xr-x 2 root root 4096 Jan 4 21:01 boot drwxr-xr-x 3 root root 4096 Jan 4 21:01 home drwxr-xr-x 36 root root 4096 Jan 4 21:01 etc -rw-r--r-- 1 root root 242447782 Jan 4 21:02 ArchLinuxARM-kirkwood-latest.tar.gz drwx------ 2 root root 16384 Jan 18 17:25 lost+found drwxr-xr-x 17 root root 4096 Jan 18 17:28 . drwxr-x---+ 4 root root 4096 Jan 18 17:49 .. zbyszko-EX58-UD4P zbyszko # ls -latr /media/zbyszko/rootfs/boot total 7004 -rw-r--r-- 1 root root 4518104 Dec 18 00:19 uImage drwxr-xr-x 2 root root 4096 Jan 4 21:01 . -rw-r--r-- 1 root root 2624329 Jan 4 21:01 initramfs-linux.img drwxr-xr-x 17 root root 4096 Jan 18 17:28 ..
Re: Pogoplug Pink E02 no network January 18, 2016 05:22PM |
Registered: 9 years ago Posts: 29 |
U-Boot 2014.04.R3-1 (May 26 2014 - 19:45:55) Arch Linux ARM Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 Hit any key to stop autoboot: 0 (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 31248384 229807f6-01 83 Attempting to boot from usb 0:1... ** File not found /boot/uEnv.txt ** Checking if uenvcmd is set ... Running default loadzimage ... ** File not found /boot/zImage ** Running default loaduimage ... 4518104 bytes read in 410 ms (10.5 MiB/s) Booting from 0 ... ## Booting kernel from Legacy Image at 00810000 ... Image Name: Linux-4.3.3-1-ARCH Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4518040 Bytes = 4.3 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.3.3-1-ARCH (builduser@leming) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu Dec 17 22:16:31 MST 2015 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Pogoplug E02 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64960 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rw rootwait mtdparts=orion_nand:1M(u-boot),-(rootfs) [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 249648K/262144K available (6499K kernel code, 538K rwdata, 1852K rodata, 300K init, 725K bss, 12496K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0830080 (8353 kB) [ 0.000000] .init : 0xc0831000 - 0xc087c000 ( 300 kB) [ 0.000000] .data : 0xc087c000 - 0xc090283c ( 539 kB) [ 0.000000] .bss : 0xc090283c - 0xc09b7d78 ( 726 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:114 [ 0.000014] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 13.647711] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 13.647898] Console: colour dummy device 80x30 [ 13.647926] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584) [ 13.737794] pid_max: default: 32768 minimum: 301 [ 13.737887] Security Framework initialized [ 13.737960] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 13.737978] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 13.738703] Initializing cgroup subsys io [ 13.738750] Initializing cgroup subsys memory [ 13.738815] Initializing cgroup subsys devices [ 13.738842] Initializing cgroup subsys freezer [ 13.738865] Initializing cgroup subsys net_cls [ 13.738885] Initializing cgroup subsys bfqio [ 13.738905] Initializing cgroup subsys perf_event [ 13.738926] Initializing cgroup subsys net_prio [ 13.739006] CPU: Testing write buffer coherency: ok [ 13.739452] Setting up static identity map for 0x81e0 - 0x8238 [ 13.741302] devtmpfs: initialized [ 13.743680] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 13.744109] pinctrl core: initialized pinctrl subsystem [ 13.744891] NET: Registered protocol family 16 [ 13.745377] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 13.767800] cpuidle: using governor ladder [ 13.797799] cpuidle: using governor menu [ 13.797966] Kirkwood: MV88F6281-A0, TCLK=200000000. [ 13.797992] Feroceon L2: Enabling L2 [ 13.798032] Feroceon L2: Cache support initialised. [ 13.839305] vgaarb: loaded [ 13.839636] SCSI subsystem initialized [ 13.840149] usbcore: registered new interface driver usbfs [ 13.840226] usbcore: registered new interface driver hub [ 13.840287] usbcore: registered new device driver usb [ 13.840459] pps_core: LinuxPPS API ver. 1 registered [ 13.840468] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 13.840503] PTP clock support registered [ 13.841563] clocksource: Switched to clocksource orion_clocksource [ 13.880239] FS-Cache: Loaded [ 13.893401] NET: Registered protocol family 2 [ 13.894195] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 13.894233] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 13.894264] TCP: Hash tables configured (established 2048 bind 2048) [ 13.894336] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 13.894360] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 13.894548] NET: Registered protocol family 1 [ 13.894865] RPC: Registered named UNIX socket transport module. [ 13.894877] RPC: Registered udp transport module. [ 13.894883] RPC: Registered tcp transport module. [ 13.894890] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.896940] futex hash table entries: 256 (order: -1, 3072 bytes) [ 13.909594] VFS: Disk quotas dquot_6.6.0 [ 13.909861] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 13.911987] FS-Cache: Netfs 'nfs' registered for caching [ 13.912896] NFS: Registering the id_resolver key type [ 13.912957] Key type id_resolver registered [ 13.912966] Key type id_legacy registered [ 13.913050] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 13.914131] fuse init (API version 7.23) [ 13.916468] aufs 4.3-20151116 [ 13.921929] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 13.921954] io scheduler noop registered [ 13.921969] io scheduler deadline registered [ 13.922244] io scheduler cfq registered [ 13.922684] io scheduler bfq registered (default) [ 13.922693] BFQ I/O-scheduler: v7r8 [ 13.922883] mv_xor mv_xor.0: Marvell shared XOR driver [ 13.962745] mv_xor mv_xor.0: Marvell XOR (Registers Mode): ( xor cpy ) [ 13.962985] mv_xor mv_xor.1: Marvell shared XOR driver [ 14.002772] mv_xor mv_xor.1: Marvell XOR (Registers Mode): ( xor cpy ) [ 14.008354] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 14.009453] console [ttyS0] disabled [ 14.029569] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 12500000) is a 16550A [ 14.585562] console [ttyS0] enabled [ 14.604157] brd: module loaded [ 14.614341] loop: module loaded [ 14.618358] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1 [ 14.624863] nand: Samsung NAND 128MiB 3,3V 8-bit [ 14.629502] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 14.637134] Scanning device for bad blocks [ 14.718833] 2 cmdlinepart partitions found on MTD device orion_nand [ 14.725148] Creating 2 MTD partitions on "orion_nand": [ 14.730317] 0x000000000000-0x000000100000 : "u-boot" [ 14.735816] 0x000000100000-0x000008000000 : "rootfs" [ 14.748363] libphy: orion_mdio_bus: probed [ 14.752632] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 15.832488] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:02:21:5c [ 15.841438] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 15.848033] ehci-pci: EHCI PCI platform driver [ 15.852580] ehci-orion: EHCI orion driver [ 15.856681] orion-ehci orion-ehci.0: EHCI Host Controller [ 15.862157] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 15.869912] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 15.891593] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 15.898474] hub 1-0:1.0: USB hub found [ 15.902330] hub 1-0:1.0: 1 port detected [ 15.906881] usbcore: registered new interface driver uas [ 15.912410] usbcore: registered new interface driver usb-storage [ 15.918502] usbcore: registered new interface driver ums-alauda [ 15.924557] usbcore: registered new interface driver ums-cypress [ 15.930647] usbcore: registered new interface driver ums-datafab [ 15.936759] usbcore: registered new interface driver ums_eneub6250 [ 15.943041] usbcore: registered new interface driver ums-freecom [ 15.949123] usbcore: registered new interface driver ums-isd200 [ 15.955146] usbcore: registered new interface driver ums-jumpshot [ 15.961323] usbcore: registered new interface driver ums-karma [ 15.967256] usbcore: registered new interface driver ums-onetouch [ 15.973469] usbcore: registered new interface driver ums-realtek [ 15.979558] usbcore: registered new interface driver ums-sddr09 [ 15.985580] usbcore: registered new interface driver ums-sddr55 [ 15.991602] usbcore: registered new interface driver ums-usbat [ 15.997902] mousedev: PS/2 mouse device common for all mice [ 16.221592] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 16.374161] hub 1-1:1.0: USB hub found [ 16.378300] hub 1-1:1.0: 4 ports detected [ 16.661589] usb 1-1.1: new high-speed USB device number 3 using orion-ehci [ 16.774952] usb-storage 1-1.1:1.0: USB Mass Storage device detected [ 16.781588] scsi host0: usb-storage 1-1.1:1.0 [ 17.011585] rtc-mv rtc-mv: internal RTC not ticking [ 17.016635] i2c /dev entries driver [ 17.020761] sdhci: Secure Digital Host Controller Interface driver [ 17.026994] sdhci: Copyright(c) Pierre Ossman [ 17.031440] sdhci-pltfm: SDHCI platform and OF driver helper [ 17.037695] ledtrig-cpu: registered to indicate activity on CPUs [ 17.043917] usbcore: registered new interface driver r8712u [ 17.049759] gre: GRE over IPv4 demultiplexor driver [ 17.054731] NET: Registered protocol family 17 [ 17.059325] Key type dns_resolver registered [ 17.064673] registered taskstats version 1 [ 17.070628] Key type encrypted registered [ 17.075304] console [netcon0] enabled [ 17.078982] netconsole: network logging started [ 17.083691] hctosys: unable to open rtc device (rtc0) [ 17.090014] Waiting for root device /dev/sda1... [ 17.782527] scsi 0:0:0:0: Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2 [ 17.792132] sd 0:0:0:0: [sda] 31252024 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 17.799836] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 17.805455] sd 0:0:0:0: [sda] Write Protect is off [ 17.810972] sd 0:0:0:0: [sda] Incomplete mode parameter data [ 17.816728] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 17.826767] sda: sda1 [ 17.831739] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 17.862840] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 17.884991] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.892780] VFS: Mounted root (ext3 filesystem) on device 8:1. [ 17.902240] devtmpfs: mounted [ 17.906179] Freeing unused kernel memory: 300K (c0831000 - c087c000) [ 18.358188] NET: Registered protocol family 10 [ 18.375287] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.387943] random: systemd urandom read with 29 bits of entropy available [ 18.421861] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 18.440380] systemd[1]: Detected architecture arm. Welcome to Arch Linux ARM! [ 18.463114] systemd[1]: Set hostname to <alarm>. [ 19.091707] systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 19.110104] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 19.132097] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 19.161784] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 19.191965] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 19.222697] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point. [ 19.251982] systemd[1]: Listening on LVM2 metadata daemon socket. [ OK ] Listening on LVM2 metadata daemon socket. [ 19.284237] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 19.312035] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 19.331827] systemd[1]: Reached target Encrypted Volumes. [ OK ] Reached target Encrypted Volumes. [ 19.361957] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ OK ] Listening on Device-mapper event daemon FIFOs. [ 19.391931] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 19.421770] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 19.460667] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 19.482283] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 19.512685] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 19.535616] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 19.571951] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 19.592910] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 19.629285] systemd[1]: Mounting FUSE Control File System... Mounting FUSE Control File System... [ 19.666917] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 19.706167] systemd[1]: Starting Journal Service... Starting Journal Service... [ 19.726386] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 19.775665] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 19.796315] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 19.849320] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 19.891905] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 20.060785] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 20.095786] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 20.123028] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 20.164894] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 20.191899] systemd[1]: Mounted FUSE Control File System. [ OK ] Mounted FUSE Control File System. [ 20.221837] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 20.243540] systemd[1]: Started Remount Root and Kernel File Systems. [ OK ] Started Remount Root and Kernel File Systems. [ 20.274320] systemd[1]: Started Apply Kernel Variables. [ OK ] Started Apply Kernel Variables. [ 20.304903] systemd[1]: Started Create list of required static device nodes for the current kernel. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ 20.363664] systemd[1]: Started Setup Virtual Console. [ OK ] Started Setup Virtual Console. [ 20.382724] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 20.696993] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. Starting Rebuild Dynamic Linker Cache... Starting Rebuild Hardware Database... Starting Flush Journal to Persistent Storage... Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Started Load/Save Random Seed. [ OK ] Started Create System Users. [ 21.094448] systemd-journald[120]: Received request to flush runtime journal from PID 1 Starting Create Static Device Nodes in /dev... [ 22.866059] random: nonblocking pool is initialized [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Rebuild Journal Catalog... [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started Rebuild Journal Catalog. [ OK ] Started Create Volatile Files and Directories. [ OK ] Started udev Kernel Device Manager. Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Started Rebuild Dynamic Linker Cache. [ OK ] Started Rebuild Hardware Database. Starting Update is Completed... Starting udev Coldplug all Devices... [ OK ] Started Update is Completed. [ OK ] Started udev [ 26.767629] MV-CESA:Could not register sha1 driver Coldplug all Devices. [ 26.801672] MV-CESA:Could not register hmac-sha1 driver [ OK ] Found device /dev/ttyS0. [ OK ] Reached target System Initialization. [ OK ] Started Daily verification of password and group files. [ OK ] Started Daily man-db cache update. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timers. [ OK ] Reached target Basic System. Starting Login Service... Starting SSH Key Generation... [ OK ] Started Entropy Harvesting Daemon. Starting Permit User Sessions... [ OK ] Started D-Bus System Message Bus. Starting Network Service... [ OK ] Started Permit User Sessions. [ OK ] Started Network Service. [ OK ] Started Login Service. [ OK ] Reached target Network. Starting Network Name Resolution... [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ 31.312100] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ OK ] Started Network Name Resolution. [ 33.915299] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 33.925239] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Arch Linux 4.3.3-1-ARCH (ttyS0) alarm login:
Re: Pogoplug Pink E02 no network January 19, 2016 12:00AM |
Admin Registered: 13 years ago Posts: 18,580 |
Re: Pogoplug Pink E02 no network January 19, 2016 08:49AM |
Registered: 9 years ago Posts: 29 |
Re: Pogoplug Pink E02 no network January 20, 2016 01:11PM |
Admin Registered: 13 years ago Posts: 18,580 |
Re: Pogoplug Pink E02 no network February 13, 2016 08:22PM |
Registered: 9 years ago Posts: 29 |
U-Boot 2015.10-tld-1 (Nov 06 2015 - 15:46:25 -0800)
Re: Pogoplug Pink E02 no network February 14, 2016 02:08PM |
Admin Registered: 13 years ago Posts: 18,580 |
Re: Pogoplug Pink E02 no network February 14, 2016 03:03PM |
Registered: 9 years ago Posts: 29 |
fw_setenv arcNumber 3542 fw_setenv machid dd6
Re: Pogoplug Pink E02 no network February 14, 2016 03:49PM |
Admin Registered: 13 years ago Posts: 18,580 |
Re: Pogoplug Pink E02 no network February 14, 2016 10:00PM |
Registered: 9 years ago Posts: 29 |
fw_setenv dtb_file
U-Boot 2015.10-tld-1 (Nov 06 2015 - 15:46:25 -0800) Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB (ECC not enabled) WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 Using egiga0 device host 192.168.1.7 is alive Using egiga0 device host 192.168.1.7 is alive Using egiga0 device host 192.168.1.7 is alive Using egiga0 device host 192.168.1.7 is alive Using egiga0 device host 192.168.1.7 is alive Uncompressing Linux... done, booting the kernel. Error: unrecognized/unsupported machine ID (r1 = 0x00000dd6). Available machine support: ID (hex) NAME ffffffff Generic DT based system ffffffff Marvell Kirkwood (Flattened Device Tree) Please check your kernel config and/or bootloader.
U-Boot 2015.10-tld-1 (Nov 06 2015 - 15:46:25 -0800) Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB (ECC not enabled) WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 Using egiga0 device host 192.168.1.7 is alive Using egiga0 device host 192.168.1.7 is alive Using egiga0 device host 192.168.1.7 is alive Using egiga0 device host 192.168.1.7 is alive Using egiga0 device host 192.168.1.7 is alive [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.1-1-ARCH (builduser@leming) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Tue Feb 2 07:05:54 MST 2016 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Pogoplug E02 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64960 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:1M(u-boot),-(rootfs) [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 249576K/262144K available (6548K kernel code, 545K rwdata, 1868K rodata, 300K init, 725K bss, 12568K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc08404b8 (8418 kB) [ 0.000000] .init : 0xc0841000 - 0xc088c000 ( 300 kB) [ 0.000000] .data : 0xc088c000 - 0xc09147ec ( 546 kB) [ 0.000000] .bss : 0xc09147ec - 0xc09c9d18 ( 726 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:114 [ 0.000013] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 11.565277] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 11.565463] Console: colour dummy device 80x30 [ 11.565491] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584) [ 11.655361] pid_max: default: 32768 minimum: 301 [ 11.655454] Security Framework initialized [ 11.655527] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 11.655547] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 11.656275] Initializing cgroup subsys io [ 11.656307] Initializing cgroup subsys memory [ 11.656355] Initializing cgroup subsys devices [ 11.656379] Initializing cgroup subsys freezer [ 11.656399] Initializing cgroup subsys net_cls [ 11.656416] Initializing cgroup subsys perf_event [ 11.656435] Initializing cgroup subsys net_prio [ 11.656515] CPU: Testing write buffer coherency: ok [ 11.656976] Setting up static identity map for 0x81e0 - 0x8238 [ 11.658861] devtmpfs: initialized [ 11.661193] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 11.661614] pinctrl core: initialized pinctrl subsystem [ 11.662360] NET: Registered protocol family 16 [ 11.662837] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 11.685366] cpuidle: using governor ladder [ 11.715364] cpuidle: using governor menu [ 11.715523] Kirkwood: MV88F6281-A0, TCLK=200000000. [ 11.715550] Feroceon L2: Enabling L2 [ 11.715589] Feroceon L2: Cache support initialised. [ 11.756823] vgaarb: loaded [ 11.757153] SCSI subsystem initialized [ 11.757637] usbcore: registered new interface driver usbfs [ 11.757712] usbcore: registered new interface driver hub [ 11.757771] usbcore: registered new device driver usb [ 11.757929] pps_core: LinuxPPS API ver. 1 registered [ 11.757939] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 11.757971] PTP clock support registered [ 11.759027] clocksource: Switched to clocksource orion_clocksource [ 11.797474] FS-Cache: Loaded [ 11.810575] NET: Registered protocol family 2 [ 11.811367] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 11.811405] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 11.811435] TCP: Hash tables configured (established 2048 bind 2048) [ 11.811510] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 11.811534] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 11.811734] NET: Registered protocol family 1 [ 11.812065] RPC: Registered named UNIX socket transport module. [ 11.812077] RPC: Registered udp transport module. [ 11.812084] RPC: Registered tcp transport module. [ 11.812090] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 11.814125] futex hash table entries: 256 (order: -1, 3072 bytes) [ 11.826867] VFS: Disk quotas dquot_6.6.0 [ 11.827125] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 11.829248] FS-Cache: Netfs 'nfs' registered for caching [ 11.830161] NFS: Registering the id_resolver key type [ 11.830216] Key type id_resolver registered [ 11.830225] Key type id_legacy registered [ 11.830320] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 11.831631] fuse init (API version 7.23) [ 11.833868] aufs 4.4-20160118 [ 11.839131] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 11.839155] io scheduler noop registered [ 11.839169] io scheduler deadline registered [ 11.839438] io scheduler cfq registered [ 11.839703] io scheduler bfq registered (default) [ 11.839712] BFQ I/O-scheduler: v7r11 [ 11.839911] mv_xor mv_xor.0: Marvell shared XOR driver [ 11.880314] mv_xor mv_xor.0: Marvell XOR (Registers Mode): ( xor cpy ) [ 11.880554] mv_xor mv_xor.1: Marvell shared XOR driver [ 11.920303] mv_xor mv_xor.1: Marvell XOR (Registers Mode): ( xor cpy ) [ 11.925867] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 11.926971] console [ttyS0] disabled [ 11.947084] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 12500000) is a 16550A [ 12.499176] console [ttyS0] enabled [ 12.518390] brd: module loaded [ 12.529187] loop: module loaded [ 12.533184] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1 [ 12.539639] nand: Samsung NAND 128MiB 3,3V 8-bit [ 12.544278] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 12.551945] Scanning device for bad blocks [ 12.633618] 2 cmdlinepart partitions found on MTD device orion_nand [ 12.639933] Creating 2 MTD partitions on "orion_nand": [ 12.645102] 0x000000000000-0x000000100000 : "u-boot" [ 12.650580] 0x000000100000-0x000008000000 : "rootfs" [ 12.662990] libphy: orion_mdio_bus: probed [ 12.667201] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 13.750036] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:02:21:5c [ 13.758918] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 13.765510] ehci-pci: EHCI PCI platform driver [ 13.770062] ehci-orion: EHCI orion driver [ 13.774166] orion-ehci orion-ehci.0: EHCI Host Controller [ 13.779635] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 13.787382] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 13.809056] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 13.815953] hub 1-0:1.0: USB hub found [ 13.819816] hub 1-0:1.0: 1 port detected [ 13.824437] usbcore: registered new interface driver uas [ 13.829959] usbcore: registered new interface driver usb-storage [ 13.836047] usbcore: registered new interface driver ums-alauda [ 13.842097] usbcore: registered new interface driver ums-cypress [ 13.848185] usbcore: registered new interface driver ums-datafab [ 13.854295] usbcore: registered new interface driver ums_eneub6250 [ 13.860569] usbcore: registered new interface driver ums-freecom [ 13.866661] usbcore: registered new interface driver ums-isd200 [ 13.872676] usbcore: registered new interface driver ums-jumpshot [ 13.878843] usbcore: registered new interface driver ums-karma [ 13.884778] usbcore: registered new interface driver ums-onetouch [ 13.890990] usbcore: registered new interface driver ums-realtek [ 13.897070] usbcore: registered new interface driver ums-sddr09 [ 13.903090] usbcore: registered new interface driver ums-sddr55 [ 13.909106] usbcore: registered new interface driver ums-usbat [ 13.915407] mousedev: PS/2 mouse device common for all mice [ 14.139056] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 14.291635] hub 1-1:1.0: USB hub found [ 14.295768] hub 1-1:1.0: 4 ports detected [ 14.579051] usb 1-1.1: new high-speed USB device number 3 using orion-ehci [ 14.731941] usb-storage 1-1.1:1.0: USB Mass Storage device detected [ 14.738556] scsi host0: usb-storage 1-1.1:1.0 [ 14.929052] rtc-mv rtc-mv: internal RTC not ticking [ 14.934101] i2c /dev entries driver [ 14.938193] sdhci: Secure Digital Host Controller Interface driver [ 14.944430] sdhci: Copyright(c) Pierre Ossman [ 14.948869] sdhci-pltfm: SDHCI platform and OF driver helper [ 14.955063] ledtrig-cpu: registered to indicate activity on CPUs [ 14.961263] usbcore: registered new interface driver r8712u [ 14.967114] gre: GRE over IPv4 demultiplexor driver [ 14.972089] NET: Registered protocol family 17 [ 14.976684] Key type dns_resolver registered [ 14.981985] registered taskstats version 1 [ 14.987916] Key type encrypted registered [ 14.992554] console [netcon0] enabled [ 14.996235] netconsole: network logging started [ 15.000945] hctosys: unable to open rtc device (rtc0) [ 15.007093] Waiting 10 sec before mounting root device... [ 15.740114] scsi 0:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 [ 15.749722] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 15.757518] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.763428] sd 0:0:0:0: [sda] Write Protect is off [ 15.769272] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.850422] sda: sda1 sda2 sda3 [ 15.857312] sd 0:0:0:0: [sda] Attached SCSI disk ^C[ 25.019305] VFS: Cannot open root device "LABEL=rootfs" or unknown-block(0,0): error -6 [ 25.027348] Please append a correct "root=" boot option; here are the available partitions: [ 25.035829] 0100 8192 ram0 (driver?) [ 25.040521] 0101 8192 ram1 (driver?) [ 25.045166] 0102 8192 ram2 (driver?) [ 25.049855] 0103 8192 ram3 (driver?) [ 25.054506] 0104 8192 ram4 (driver?) [ 25.059189] 0105 8192 ram5 (driver?) [ 25.063836] 0106 8192 ram6 (driver?) [ 25.068484] 0107 8192 ram7 (driver?) [ 25.073150] 0108 8192 ram8 (driver?) [ 25.078004] 0109 8192 ram9 (driver?) [ 25.082672] 010a 8192 ram10 (driver?) [ 25.087406] 010b 8192 ram11 (driver?) [ 25.092159] 010c 8192 ram12 (driver?) [ 25.096893] 010d 8192 ram13 (driver?) [ 25.101647] 010e 8192 ram14 (driver?) [ 25.106380] 010f 8192 ram15 (driver?) [ 25.111139] 0800 78150744 sda driver: sd [ 25.115780] 0801 6469632 sda1 0004f6e7-01 [ 25.120709] 0802 69582848 sda2 0004f6e7-02 [ 25.125617] 0803 2097152 sda3 0004f6e7-03 [ 25.130545] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 25.138846] CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.1-1-ARCH #1 [ 25.145136] Hardware name: Pogoplug E02 [ 25.149010] [<c0010508>] (unwind_backtrace) from [<c000da0c>] (show_stack+0x10/0x14) [ 25.156796] [<c000da0c>] (show_stack) from [<c00cb8ac>] (panic+0x88/0x20c) [ 25.163706] [<c00cb8ac>] (panic) from [<c08422d4>] (mount_block_root+0x1a4/0x260) [ 25.171227] [<c08422d4>] (mount_block_root) from [<c084257c>] (mount_root+0xf0/0x11c) [ 25.179091] [<c084257c>] (mount_root) from [<c0842704>] (prepare_namespace+0x15c/0x1bc) [ 25.187131] [<c0842704>] (prepare_namespace) from [<c0841ebc>] (kernel_init_freeable+0x20c/0x25c) [ 25.196048] [<c0841ebc>] (kernel_init_freeable) from [<c063a870>] (kernel_init+0x8/0xec) [ 25.204179] [<c063a870>] (kernel_init) from [<c000a4d0>] (ret_from_fork+0x14/0x24) [ 25.211784] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 84.949046] random: nonblocking pool is initialized
PogoE02> printenv arcNumber=3542 bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_exec=mw 0x800000 0 1; run load_uimage; if run load_initrd; then if run load_dtb; then bootm 0x800000 0x1100000 0x1c00000; else bootm 0x800000 0x1100000; fi; else if run load_dtb; then bootm 0x800000 - 0x1c00000; else bootm 0x800000; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi; sleep 3 bootdelay=10 bootdev=usb device=0:1 devices=usb ide mmc disks=0 1 2 3 ethact=egiga0 ethaddr=00:25:31:02:21:5C if_netconsole=ping $serverip ipaddr=192.168.1.21 led_error=orange blinking led_exit=green off led_init=green blinking load_dtb=echo loading DTB $dtb_file ...; ext2load $bootdev $device 0x1c00000 $dtb_file load_initrd=echo loading uInitrd ...; ext2load $bootdev $device 0x1100000 /boot/uInitrd load_uimage=echo loading uImage ...; ext2load $bootdev $device 0x800000 /boot/uImage machid=dd6 mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),-(rootfs) nc_ready=0 partition=nand0,2 preboot=run preboot_nc preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if ext2load $dev $disknum:1 0x800000 /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done serverip=192.168.1.7 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_import=echo importing envs ...; env import -t 0x810000 uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x810000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_ready_retry=15 Environment size: 2795/131068 bytes PogoE02>
Re: Pogoplug Pink E02 no network February 14, 2016 10:43PM |
Admin Registered: 13 years ago Posts: 18,580 |
setenv dtb_file /'boot/dts/kirkwood-pogo_e02.dtb' boot
setenv set_bootargs 'setenv bootargs console=ttyS0,115200 root=/dev/sda1 rootdelay=10 $mtdparts $custom_params' setenv dtb_file /'boot/dtbs/kirkwood-pogo_e02.dtb' boot
printenv
Re: Pogoplug Pink E02 no network February 14, 2016 10:46PM |
Admin Registered: 13 years ago Posts: 18,580 |
Re: Pogoplug Pink E02 no network February 14, 2016 11:06PM |
Registered: 9 years ago Posts: 29 |
Re: Pogoplug Pink E02 no network February 14, 2016 11:35PM |
Admin Registered: 13 years ago Posts: 18,580 |