Welcome! Log In Create A New Profile

Advanced

HP T5325 Thin Client U-Boot-2017.07-tld-1

Posted by bodhi 
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
July 29, 2017 05:19PM
feas Wrote:
-------------------------------------------------------
> so if it is running he should be able to see it bo
> ot and get a login prompt right?

Yes. Run nc at the server 192.168.1.2:

nc -lup 6666 192.168.1.10 6666

And we should see the kernel being loaded, and then starts.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
July 30, 2017 12:46AM
It's no use. There is no t5325 in my local network anywhere.
nc -lup 6666 192.168.1.10 6666
Does nothing. Well, I'll wait for my programmer to arrive and then see what the problem is.
Thank you for your help so far.
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
July 30, 2017 02:01AM
kalehrl,

> It's no use. There is no t5325 in my local network
> anywhere.
>
> nc -lup 6666 192.168.1.10 6666
>


Normally, netconsole will run very briefly. You have to start nc first, and then power up the box. That way you can catch it during booting. If you miss this window, it will not accept connection.

Once u-boot loaded the kernel, the network connection will be shutdown. Until the system is running fully there is no network connection, ie. no IP.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
July 30, 2017 03:11AM
That's how I was trying to catch netconsole output but to no avail.
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
July 30, 2017 03:44AM
kalehrl Wrote:
-------------------------------------------------------
> That's how I was trying to catch netconsole output
> but to no avail.


Which system and which nc binary are you using? if it is Ubuntu, then there is an additional step needed: install netcat-traditional.

At terminal

nc

-bodhi
===========================
Forum Wiki
bodhi's corner



Edited 3 time(s). Last edit at 07/30/2017 03:48AM by bodhi.
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
July 30, 2017 09:17AM
Windows 10 and nc111nt_rodneybeede.
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
July 30, 2017 03:32PM
> Windows 10 and nc111nt_rodneybeede.

That might be a problem.

-bodhi
===========================
Forum Wiki
bodhi's corner



Edited 1 time(s). Last edit at 07/30/2017 03:32PM by bodhi.
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
August 01, 2017 11:51AM
Damn! My CP2102 USB TTL arrived but the cables don't fit the on-board socket!
I need to find 4pin micro jst connector.
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
August 01, 2017 12:38PM
kalehrl Wrote:
-------------------------------------------------------
> Damn! My CP2102 USB TTL arrived but the cables don
> 't fit the on-board socket!
> I need to find 4pin micro jst connector.


PM me your address if in the U.S. and I will be happy to send you one or two.
Otherwise not sure how long it would take to get to you let me know.
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
August 01, 2017 12:41PM
Thank you for your offer but I'm in Serbia.
I can order it from China but it would take a month to arrive so I'll try to source it locally.
Bummer!
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
August 01, 2017 01:11PM
ok, let me know if you change your mind. I just don't know about customs and such. I have read that even sending simple stuff to Canada from the U.S. can cost some ridiculous tariffs. When I was looking for some I was told hobby stores like rc cars and boats may have cables. My local hobby stores were pretty small and didn't carry them in stock though.
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
August 01, 2017 03:29PM
kalehrl,

Try using 3 female-male jumper wires if you can find ones that small.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 09, 2017 12:38AM
I got the cable but I'm able to read serial console.
The CP2102 USB TTL I got is recognised my my Debian Stretch as:
Bus 005 Device 003: ID 04f2:b26f Chicony Electronics Co., Ltd
kern log sees it as a webcam!!
Sep  9 08:14:08 x101ch kernel: [   12.089228] usb 1-4: New USB device found, idVendor=04f2, idProduct=b26f
Sep  9 08:14:08 x101ch kernel: [   12.093481] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
Sep  9 08:14:08 x101ch kernel: [   12.097853] usb 1-4: Product: USB2.0 0.3M UVC WebCam
Sep  9 08:14:08 x101ch kernel: [   12.102257] usb 1-4: Manufacturer: Chicony Electronics Co., Ltd.
Sep  9 08:14:08 x101ch kernel: [   12.106772] usb 1-4: SerialNumber: 0x0001
There is no /dev/ttyUSB0 or any other /dev/ttyUSB
I tried booting it using /dev/tty0 which is present, but no luck.

EDIT:
I managed to read the serial console on my Windows PC and it seems to work fine:

U-Boot 2016.05-tld-1 (Jun 12 2016 - 14:06:08 -0700)
HP Thin Client T5325

SoC:   Kirkwood 88F6281_A1
SPI:   ready
DRAM:  512 MiB
WARNING: Caches not enabled
SF: Detected MX25L8005 with page size 256 Bytes, erase size 64 KiB, total 1 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
PHY reset timed out
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices...
Use USB retry period from the environment: 15 second(s)
1 Storage Device(s) found

Reset IDE: Bus 0: OK Bus 1: not available
  Device 0: Model: SM22 Firm: I052 Ser#: (03)5526888-20080228
            Type: Hard Disk
            Capacity: 463.6 MB = 0.4 GB (949536 x 512)

Partition Map for USB device 0  --   Partition Type: DOS

Part    Start Sector    Num Sectors     UUID            Type
  1     2048            7911424         0016d9ca-01     83
loading envs from usb 0 ...
** File not found /boot/uEnv.txt **

Partition Map for IDE device 0  --   Partition Type: DOS

Part    Start Sector    Num Sectors     UUID            Type
  1     63              949473          00000000-01     83 Boot
loading envs from ide 0 ...
** File not found /boot/uEnv.txt **
running scan_disk ...
Scan device usb
device usb 0:1
1 bytes read in 242 ms (0 Bytes/s)
Found bootable drive on usb 0
loading uImage ...
3821592 bytes read in 454 ms (8 MiB/s)
loading uInitrd ...
7245696 bytes read in 581 ms (11.9 MiB/s)
loading DTB /boot/dts/kirkwood-t5325.dtb ...
11919 bytes read in 1145 ms (9.8 KiB/s)
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-4.12.1-kirkwood-tld-1
   Created:      2017-07-20   8:11:24 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3821528 Bytes = 3.6 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
   Image Name:   initramfs-4.12.1-kirkwood-tld-1
   Created:      2017-07-24   0:18:23 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    7245632 Bytes = 6.9 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01c00000
   Booting using the fdt blob at 0x1c00000
   Loading Kernel Image ... OK
   Loading Ramdisk to 0f917000, end 0fffff40 ... OK
   Loading Device Tree to 0f911000, end 0f916e8e ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.12.1-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Sat Jul 15 21:40:50 PDT 2017
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] OF: fdt: Machine model: HP t5325 Thin Client
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi0.0:512K(uboot),256K(sdd_firmware),64K(uboot_env),64K(permanent_uboot_env),64K(hp_env)
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 499272K/524288K available (8192K kernel code, 716K rwdata, 1972K rodata, 1024K init, 288K bss, 25016K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0900000   (9184 kB)
[    0.000000]       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
[    0.000000]       .data : 0xc0d00000 - 0xc0db3274   ( 717 kB)
[    0.000000]        .bss : 0xc0db9b9c - 0xc0e01e60   ( 289 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000007] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.000041] Switching to timer-based delay loop, resolution 5ns
[    0.000502] Console: colour dummy device 80x30
[    0.000535] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[    0.000559] pid_max: default: 32768 minimum: 301
[    0.000759] Security Framework initialized
[    0.000879] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000898] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001739] CPU: Testing write buffer coherency: ok
[    0.002728] Setting up static identity map for 0x100000 - 0x100058
[    0.002989] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
[    0.006218] devtmpfs: initialized
[    0.010471] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.010498] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.010890] prandom: seed boundary self test passed
[    0.014626] prandom: 100 self tests passed
[    0.014639] pinctrl core: initialized pinctrl subsystem
[    0.015781] NET: Registered protocol family 16
[    0.016250] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.017830] cpuidle: using governor ladder
[    0.017900] cpuidle: using governor menu
[    0.018326] Feroceon L2: Enabling L2
[    0.018372] Feroceon L2: Cache support initialised.
[    0.018726] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[    0.024422] No ATAGs?
[    0.033809] vgaarb: loaded
[    0.034121] SCSI subsystem initialized
[    0.034594] usbcore: registered new interface driver usbfs
[    0.034679] usbcore: registered new interface driver hub
[    0.034762] usbcore: registered new device driver usb
[    0.035871] clocksource: Switched to clocksource orion_clocksource
[    0.124632] VFS: Disk quotas dquot_6.6.0
[    0.124710] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.135217] NET: Registered protocol family 2
[    0.135992] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.136053] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.136106] TCP: Hash tables configured (established 4096 bind 4096)
[    0.136193] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.136218] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.136396] NET: Registered protocol family 1
[    0.136807] RPC: Registered named UNIX socket transport module.
[    0.136820] RPC: Registered udp transport module.
[    0.136827] RPC: Registered tcp transport module.
[    0.136834] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.137069] Unpacking initramfs...
[    0.791350] Freeing initrd memory: 7076K
[    0.791488] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.792458] audit: initializing netlink subsys (disabled)
[    0.792929] Initialise system trusted keyrings
[    0.792981] Key type blacklist registered
[    0.793078] audit: type=2000 audit(0.786:1): state=initialized audit_enabled=0 res=1
[    0.793173] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.793241] zbud: loaded
[    0.794194] NFS: Registering the id_resolver key type
[    0.794219] Key type id_resolver registered
[    0.794227] Key type id_legacy registered
[    0.794245] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.794255] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.794452] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.794648] fuse init (API version 7.26)
[    0.794980] orangefs_debugfs_init: called with debug mask: :none: :0:
[    0.795183] orangefs_init: module version upstream loaded
[    0.795194] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    2.555883] random: fast init done
[    6.639565] Key type asymmetric registered
[    6.639582] Asymmetric key parser 'x509' registered
[    6.639646] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    6.639657] io scheduler noop registered
[    6.639666] io scheduler deadline registered
[    6.639742] io scheduler cfq registered (default)
[    6.641076] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[    6.642943] mvebu-pcie mbus@f1000000:pcie-controller@82000000: PCI host bridge to bus 0000:00
[    6.642964] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    6.642978] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[    6.642991] pci_bus 0000:00: root bus resource [bus 00-ff]
[    6.643316] PCI: bus0: Fast back to back transfers disabled
[    6.643341] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    6.643859] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    6.665947] PCI: bus1: Fast back to back transfers disabled
[    6.666058] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe5ffffff]
[    6.666074] pci 0000:00:01.0: BAR 13: assigned [io  0x10000-0x10fff]
[    6.666093] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe3ffffff pref]
[    6.666111] pci 0000:01:00.0: BAR 1: assigned [mem 0xe4000000-0xe403ffff]
[    6.666128] pci 0000:01:00.0: BAR 2: assigned [io  0x10000-0x1007f]
[    6.666143] pci 0000:00:01.0: PCI bridge to [bus 01]
[    6.666157] pci 0000:00:01.0:   bridge window [io  0x10000-0x10fff]
[    6.666173] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe5ffffff]
[    6.666266] pcieport 0000:00:01.0: enabling device (0140 -> 0143)
[    6.666806] mv_xor f1060800.xor: Marvell shared XOR driver
[    6.726607] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr )
[    6.726831] mv_xor f1060900.xor: Marvell shared XOR driver
[    6.786602] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr )
[    6.787026] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    6.788370] console [ttyS0] disabled
[    6.788436] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A
[    7.504668] console [ttyS0] enabled
[    7.516638] loop: module loaded
[    7.520369] sata_mv f1080000.sata: slots 32 ports 2
[    7.528100] scsi host0: sata_mv
[    7.531692] scsi host1: sata_mv
[    7.535100] ata1: SATA max UDMA/133 irq 35
[    7.539268] ata2: SATA max UDMA/133 irq 35
[    7.544940] m25p80 spi0.0: found mx25l8005, expected m25p80
[    7.550602] m25p80 spi0.0: mx25l8005 (1024 Kbytes)
[    7.555431] 5 cmdlinepart partitions found on MTD device spi0.0
[    7.561403] Creating 5 MTD partitions on "spi0.0":
[    7.566243] 0x000000000000-0x000000080000 : "uboot"
[    7.572470] 0x000000080000-0x0000000c0000 : "sdd_firmware"
[    7.579326] 0x0000000c0000-0x0000000d0000 : "uboot_env"
[    7.585854] 0x0000000d0000-0x0000000e0000 : "permanent_uboot_env"
[    7.593076] 0x0000000e0000-0x0000000f0000 : "hp_env"
[    7.600299] libphy: Fixed MDIO Bus: probed
[    7.605212] libphy: orion_mdio_bus: probed
[    7.614285] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[    7.622499] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address f4:ce:46:23:f6:83
[    7.631438] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.638102] ehci-pci: EHCI PCI platform driver
[    7.642634] ehci-orion: EHCI orion driver
[    7.646914] orion-ehci f1050000.ehci: EHCI Host Controller
[    7.652452] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[    7.660363] orion-ehci f1050000.ehci: irq 31, io mem 0xf1050000
[    7.695907] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[    7.702221] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.709076] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.716356] usb usb1: Product: EHCI Host Controller
[    7.721253] usb usb1: Manufacturer: Linux 4.12.1-kirkwood-tld-1 ehci_hcd
[    7.728005] usb usb1: SerialNumber: f1050000.ehci
[    7.733428] hub 1-0:1.0: USB hub found
[    7.737281] hub 1-0:1.0: 1 port detected
[    7.741892] usbcore: registered new interface driver usb-storage
[    7.748324] mousedev: PS/2 mouse device common for all mice
[    7.754523] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0
[    7.761682] i2c /dev entries driver
[    7.767393] hidraw: raw HID events driver (C) Jiri Kosina
[    7.773240] drop_monitor: Initializing network drop monitor service
[    7.779843] NET: Registered protocol family 17
[    7.784384] Key type dns_resolver registered
[    7.789480] registered taskstats version 1
[    7.793592] Loading compiled-in X.509 certificates
[    7.798528] zswap: loaded using pool lzo/zbud
[    7.813033] Key type big_key registered
[    7.826487] Key type encrypted registered
[    7.831904] rtc-mv f1010300.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    8.035915] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[    8.044530] ata1.00: ATA-7: SM224, I0521, max UDMA/133
[    8.049721] ata1.00: 949536 sectors, multi 0: LBA
[    8.056969] ata1.00: configured for UDMA/133
[    8.071825] scsi 0:0:0:0: Direct-Access     ATA      SM224            1    PQ: 0 ANSI: 5
[    8.081065] sd 0:0:0:0: [sda] 949536 512-byte logical blocks: (486 MB/464 MiB)
[    8.088970] sd 0:0:0:0: [sda] Write Protect is off
[    8.093949] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    8.103183] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    8.111570]  sda: sda1
[    8.115352] sd 0:0:0:0: [sda] Attached SCSI disk
[    8.296381] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
[    8.303128] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    8.311071] hub 1-1:1.0: USB hub found
[    8.314999] hub 1-1:1.0: 4 ports detected
[    8.420489] ata2: SATA link down (SStatus 0 SControl F300)
[    8.439122] Freeing unused kernel memory: 1024K
Loading, please wait...
starting version 232
[    8.635962] usb 1-1.3: new high-speed USB device number 3 using orion-ehci
[    8.808014] usb 1-1.3: New USB device found, idVendor=090c, idProduct=1000
[    8.814948] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    8.835963] usb 1-1.3: Product: USB DISK
[    8.839923] usb 1-1.3: Manufacturer: SMI Corporation
[    8.844924] usb 1-1.3: SerialNumber: DA6HAF25000000597
[    8.864521] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[    8.882957] scsi host2: usb-storage 1-1.3:1.0
[    9.297441] usbcore: registered new interface driver uas
Begin: Loading essential drivers ... done.
[   10.167222] scsi 2:0:0:0: Direct-Access     SMI      USB DISK         1100 PQ: 0 ANSI: 4
[   10.180932] sd 2:0:0:0: [sdb] 7913472 512-byte logical blocks: (4.05 GB/3.77 GiB)
[   10.194438] sd 2:0:0:0: [sdb] Write Protect is off
[   10.205808] sd 2:0:0:0: [sdb] No Caching mode page found
[   10.214073] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   10.229276]  sdb: sdb1
[   10.237560] sd 2:0:0:0: [sdb] Attached SCSI removable disk
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Warning: fsck not present, so skipping root file system
[   19.416704] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem
[   19.425701] EXT4-fs (sdb1): INFO: recovery required on readonly filesystem
[   19.432774] EXT4-fs (sdb1): write access will be enabled during recovery
[   19.484365] EXT4-fs (sdb1): recovery complete
[   19.496810] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[ ok ] Setting hostname to 'debian'...done.
[....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232
. ok
[....] Synthesizing the initial hotplug events...[   21.657563] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[ ok                                             done.
[....] Waiting for /dev to be fully populated...[   22.013932] xgifb: module is from the staging directory, the quality is unknown, you have been warned.
[   22.077412] xgifb 0000:01:00.0: Relocate IO address: 10000 [00010030]
[   22.133890] marvell-cesa f1030000.crypto: CESA device successfully registered
[   22.134530] orion_wdt: Initial timeout 21 sec
[   22.203300] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   22.203792] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   22.294807] xgifb 0000:01:00.0: enabling device (0140 -> 0143)
[   22.366113] xgifb 0000:01:00.0: chipid = 32
[   22.382326] asoc-simple-card sound: alc5621-hifi <-> i2s mapping ok
[   22.448705] xgifb: SR14=51 DramSzie 2000000 ChannelNum 1
[   22.487648] xgifb 0000:01:00.0: Framebuffer at 0xe0000000, mapped to 0xe2000000, size 32768k
[   22.540170] xgifb 0000:01:00.0: MMIO at 0xe4000000, mapped to 0xe1080000, size 256k
[   22.654402] xgifb 0000:01:00.0: No or unknown bridge type detected
[   22.675543] xgifb: Default mode is 800x600x16 (60Hz)
[   22.793210] random: crng init done
done.
[ ok ] Activating swap:.
[   32.652079] EXT4-fs (sdb1): re-mounted. Opts: (null)
[....] Will now check root file system:fsck from util-linux 2.29.2
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -y -C0 /dev/sdb1
e2fsck 1.43.4 (31-Jan-2017)
rootfs: clean, 14467/247504 files, 154789/988928 blocks
. ok
[   32.911222] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ ok ] Will now activate lvm and md swap:done.
[info] Will now check all file systems.
fsck from util-linux 2.29.2
Checking all file systems.
LABEL=rootfs is mounted
[ ok ] Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable..
[ ok ] Cleaning up temporary files...[....] Cleaning /tmp...done.
[ ok .
[ ok ] Will now mount local filesystems:.
[ ok ] Will now activate swapfile swap:done.
[ ok ] Checking minimum space in /tmp...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables...done.
[ ok ] Initializing random number generator...done.
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5
Copyright 2004-2016 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/f4:ce:46:23:f6:83
Sending on   LPF/eth0/f4:ce:46:23:f6:83
Sending on   Socket/fallback
DHCPREQUEST of 192.168.0.14 on eth0 to 255.255.255.255 port 67
[  114.256174] NET: Registered protocol family 10
[  114.263182] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  114.269300] Segment Routing with IPv6
DHCPREQUEST of 192.168.0.14 on eth0 to 255.255.255.255 port 67
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
No DHCPOFFERS received.
Trying recorded lease 192.168.0.14
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.

--- 192.168.0.1 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms

No working leases in persistent database - sleeping.
done.
[ ok ] Starting RPC port mapper daemon: rpcbind.
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1323 (syslogd)
. ok
[ ok ] Starting system message bus: dbus.
[ ok ] Starting NFS common utilities: statd idmapd.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[ ok ] Starting NTP server: ntpd.
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1322 (klogd)
. ok
[ ok ] Starting OpenBSD Secure Shell server: sshd.
[ ok ] Running local boot scripts (/etc/rc.local).

Debian GNU/Linux 9 debian ttyS0

debian login: root
Password:
Last login: Wed Dec 31 16:01:32 PST 1969 from 192.168.0.220 on pts/0
Linux debian 4.12.1-kirkwood-tld-1 #1 PREEMPT Sat Jul 15 21:40:50 PDT 2017 armv5tel

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~#



Edited 1 time(s). Last edit at 09/09/2017 01:43AM by kalehrl.
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 09, 2017 01:56AM
It seems either it doesn't get an ip address from the router:
No DHCPOFFERS received.
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 09, 2017 02:19AM
kalehrl,

Everything looks OK except etherrnet.

Try unplug the cable and plug it back in. When you do this, dmesg should show the disconnected and connected status. After that, see if it will get dynamic IP.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 09, 2017 02:59AM
No, it doesn't seem to get an ip address after unplugging/replugging ethernet cable:
dmesg:
[  130.030435] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
[  137.325602] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
ip address show:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether f4:ce:46:23:f6:83 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::f6ce:46ff:fe23:f683/64 scope link
       valid_lft forever preferred_lft forever
There is no eth0 ip address.
When I set static ip address, after reboot ethernet doesn't work.
Only when I unplug/replug the cable it starts working.



Edited 1 time(s). Last edit at 09/09/2017 03:06AM by kalehrl.
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 09, 2017 03:47AM
kalehrl,

> When I set static ip address, after reboot etherne
> t doesn't work.
> Only when I unplug/replug the cable it starts work
> ing.

That's good. Please use static IP for now, unplug/replug the cable to get it working. I'll look into this problem.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 09, 2017 04:57AM
Ok, thank you very much.
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 09, 2017 09:22PM
kalehrl,

Thanks for reporting this problem. I was able to repeat a similar scenario to your finding!

Indeed, with a static IP the negotiation seems to be wrong, I got the initial 1Gbs link from the driver, which is wrong (you can't use SSH with this wrong speed). After unplug and replug the cable, the speed renegotiated to the correct 100Mbs, and logging with SSH is OK.

I'll have to take a closer look to see why the link speed was wrong initially.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 09, 2017 11:28PM
What about DHCP? The ethernet didn't work at all with the dynamic address even after replugging the cable?
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 10, 2017 04:19PM
kalehrl Wrote:
-------------------------------------------------------
> What about DHCP? The ethernet didn't work at all w
> ith the dynamic address even after replugging the
> cable?

It's the same problem.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 10, 2017 09:47PM
There appears to be some type of issue with 4.12.x versions of the kernel on the HP t5325 as I've just updated mine an I can no longer get an IP with dhcp and setting the IP manually also doesn't result in a working link. One of the strange symptoms is no LEDs active on the port with a cable attached, but when removing the cable I get the green LED lit. For now I'm using a USB Ethernet as I'm to lazy to downgrade the kernel.

Ray
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 11, 2017 12:03AM
rayknight Wrote:
-------------------------------------------------------
> There appears to be some type of issue with 4.12.x
> versions of the kernel on the HP t5325 as I've jus
> t updated mine an I can no longer get an IP with d
> hcp and setting the IP manually also doesn't resul
> t in a working link. One of the strange symptoms
> is no LEDs active on the port with a cable attache
> d, but when removing the cable I get the green LED
> lit. For now I'm using a USB Ethernet as I'm to l
> azy to downgrade the kernel.
>
> Ray

No need to use USB ethernet or downgrade kernel. Just use static IP, unplug/replug the cable. It works consistenly for me. This might be due to the updated Marvell ethernet driver that effect 100Mbps NIC.

-bodhi
===========================
Forum Wiki
bodhi's corner
Kamal
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 21, 2017 12:04AM
This version of U-BOOT (uboot.2016.05-tld-1.t5325.mtd0.kwb) seems to be having a problem with networking.

I used kwboot on a HP T5325. If I type 'dhcp' at the U-BOOT prompt, I could see that the device was getting a DHCP IP address. If the device is then booted to Debian 8 or 9, DHCP was still working at the OS level.

However, if the device is flashed with the same version of U-BOOT with the env (uboot.2016.05-tld-1.environment.64K.img), "dhcp" command issued at the U-BOOT prompt failed to fetch a DHCP address. Once the device is booted to the OS (Debian 9), neither the OS could fetch a DHCP IP address.

As found in the instructions, I could not understand why Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2 rootfs is needed to flash this version of U-BOOT. When ThinPro is running, only the two files (uboot.2016.05-tld-1.t5325.mtd0.kwb, uboot.2016.05-tld-1.environment.64K.img) are needed. So a USB without a special rootfs could be used for that purpose (or even transferred via network). So I didn't use the mentioned rootfs.

I appreciate if anyone could help me with the networking issue. It is strange that the same version of U-BOOT behaves differently when used with kwboot and flashed. I wonder if any env variable could get the device to work correctly.
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 21, 2017 02:35AM
Kamal,

> I used kwboot on a HP T5325. If I type 'dhcp' at
> the U-BOOT prompt, I could see that the device was
> getting a DHCP IP address. If the device is then
> booted to Debian 8 or 9, DHCP was still working at
> the OS level.
>
> However, if the device is flashed with the same
> version of U-BOOT with the env
> (uboot.2016.05-tld-1.environment.64K.img), "dhcp"
> command issued at the U-BOOT prompt failed to
> fetch a DHCP address. Once the device is booted to
> the OS (Debian 9), neither the OS could fetch a
> DHCP IP address.
>

You need to post the serial boot log and the envs list at serial console prompt, in both cases, so I can see what the problem was.

> networking issue. It is strange that the same
> version of U-BOOT behaves differently when used
> with kwboot and flashed. I wonder if any env
> variable could get the device to work correctly.

I don't think that it does, if you have done the installation correctly.

These are 2 scenarios that will cause it to behave differently (it depends on what is the u-boot envs in flash look like).

1. If you have flashed the new default envs image uboot.2016.05-tld-1.environment.64K.img . And made some changes specific to your box (e.g. ethaddr, ipaddr, serverip,...).

2. If you did not flash the default envs image.

So if you have flashed the default envs image uboot.2016.05-tld-1.environment.64K.img to SPI flash, then in both boots, with installed u-boot and kwboot, uboot.2016.05-tld-1 would behave exactly the same way.

In either case, the only way for me to determine if it was a real problem or it was a wrong installation is to look at the entire serial bootlog (from u-boot banner to Linux prompt).

-bodhi
===========================
Forum Wiki
bodhi's corner
Kamal
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 21, 2017 05:29AM
Tried again but the results were the same. I did flash the default env image (uboot.2016.05-tld-1.environment.64K.img). This time, I used the Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2 rootfs as well with the exact commands given in this tread - except that I didn't run the three commands given to enable netconsole. Even though I could set the envs via the U-BOOT prompt, I used Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2 rootfs thinking that if ever the binaries in it could make a difference.

Here's the output if the device is flashed with uboot.2016.05-tld-1.t5325.mtd0.kwb:

U-Boot 2016.05-tld-1 (Jun 12 2016 - 14:06:08 -0700)
HP Thin Client T5325

SoC:   Kirkwood 88F6281_A1
SPI:   ready
DRAM:  512 MiB
WARNING: Caches not enabled
SF: Detected M25P80 with page size 256 Bytes, erase size 64 KiB, total 1 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
PHY reset timed out
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0 
T5325> printenv 
arcNumber=2846
bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec
bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi
bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi
bootdelay=10
bootdev=usb
device=0:1
devices=usb ide
disks=0 1 2 3
dtb_file=/boot/dts/kirkwood-t5325.dtb
ethact=egiga0
ethaddr=f4:ce:46:24:38:b3
if_netconsole=ping $serverip
ipaddr=192.168.0.231
led_error=orange blinking
led_exit=green off
led_init=green blinking
load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file
load_dtb_addr=0x1c00000
load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd
load_initrd_addr=0x1100000
load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage
load_uimage_addr=0x800000
mainlineLinux=yes
mtdparts=mtdparts=spi0.0:512K(uboot),256K(sdd_firmware),64K(uboot_env),64K(permanent_uboot_env),64K(hp_env)
preboot_nc=run if_netconsole start_netconsole
scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start";  setenv scan_ide "ide reset";  setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done
serverip=192.168.0.220
set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;
stderr=serial
stdin=serial
stdout=serial
uenv_addr=0x810000
uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize
uenv_init_devices=setenv init_usb "usb start";  setenv init_ide "ide reset";  setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done;
uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices;  do for disknum in 0; do run uenv_read_disk; done; done;
uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi
uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read;  fi; else if $devtype part $disknum; then run uenv_read; fi;  fi
usb_ready_retry=15

Environment size: 2829/65532 bytes
T5325> dhcp
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
BOOTP broadcast 7
BOOTP broadcast 8
BOOTP broadcast 9
BOOTP broadcast 10
BOOTP broadcast 11
BOOTP broadcast 12
BOOTP broadcast 13
BOOTP broadcast 14
BOOTP broadcast 15
BOOTP broadcast 16
BOOTP broadcast 17

Retry time exceeded; starting again
T5325>

Here's the output if kwboot is used with uboot.2016.05-tld-1.t5325.mtd0.kwb:

U-Boot 2016.05-tld-1 (Jun 12 2016 - 14:06:08 -0700)
HP Thin Client T5325

SoC:   Kirkwood 88F6281_A1
SPI:   ready
DRAM:  512 MiB
WARNING: Caches not enabled
SF: Detected M25P80 with page size 256 Bytes, erase size 64 KiB, total 1 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
PHY reset timed out
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0 
T5325> printenv 
arcNumber=2846
bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec
bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi
bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi
bootdelay=10
bootdev=usb
device=0:1
devices=usb ide
disks=0 1 2 3
dtb_file=/boot/dts/kirkwood-t5325.dtb
ethact=egiga0
ethaddr=f4:ce:46:24:38:b3
if_netconsole=ping $serverip
ipaddr=192.168.0.231
led_error=orange blinking
led_exit=green off
led_init=green blinking
load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file
load_dtb_addr=0x1c00000
load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd
load_initrd_addr=0x1100000
load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage
load_uimage_addr=0x800000
mainlineLinux=yes
mtdparts=mtdparts=spi0.0:512K(uboot),256K(sdd_firmware),64K(uboot_env),64K(permanent_uboot_env),64K(hp_env)
preboot_nc=run if_netconsole start_netconsole
scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start";  setenv scan_ide "ide reset";  setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done
serverip=192.168.0.220
set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;
stderr=serial
stdin=serial
stdout=serial
uenv_addr=0x810000
uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize
uenv_init_devices=setenv init_usb "usb start";  setenv init_ide "ide reset";  setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done;
uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices;  do for disknum in 0; do run uenv_read_disk; done; done;
uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi
uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read;  fi; else if $devtype part $disknum; then run uenv_read; fi;  fi
usb_ready_retry=15

Environment size: 2829/65532 bytes
T5325> dhcp
BOOTP broadcast 1
DHCP client bound to address 10.42.0.50 (5 ms)
*** Warning: no boot file name; using '0A2A0032.img'
Using egiga0 device
TFTP from server 10.42.0.1; our IP address is 10.42.0.50
Filename '0A2A0032.img'.
Load address: 0x800000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
T5325>

And the difference between the above two outputs are:

diff with-new-uboot-flashed.txt with-new-uboot-kwboot.txt 
61,80c61,70
< BOOTP broadcast 2
< BOOTP broadcast 3
< BOOTP broadcast 4
< BOOTP broadcast 5
< BOOTP broadcast 6
< BOOTP broadcast 7
< BOOTP broadcast 8
< BOOTP broadcast 9
< BOOTP broadcast 10
< BOOTP broadcast 11
< BOOTP broadcast 12
< BOOTP broadcast 13
< BOOTP broadcast 14
< BOOTP broadcast 15
< BOOTP broadcast 16
< BOOTP broadcast 17
< 
< Retry time exceeded; starting again
< T5325> 
< 
---
> DHCP client bound to address 10.42.0.50 (5 ms)
> *** Warning: no boot file name; using '0A2A0032.img'
> Using egiga0 device
> TFTP from server 10.42.0.1; our IP address is 10.42.0.50
> Filename '0A2A0032.img'.
> Load address: 0x800000
> Loading: *
> TFTP error: 'File not found' (1)
> Not retrying...
> T5325>

So when the device is flashed, U-BOOT does not get a DHCP IP address. But the same U-BOOT image used with kwboot works as expected.
Kamal
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 21, 2017 01:34PM
For comparison purposes, here's the output after the device is flashed with the old version of U-BOOT:

       _   _     .____    
      | |_| |    |  _ \  
      |  _  |    | (_))   
      | |-| |    | |      
      |_| |_|    |_|  ..  
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_ 
| | | |___|  _ \ / _ \ / _ \| __| 
| |_| |___| |_) | (_) | (_) | |_ 
 \___/    |____/ \___/ \___/ \__| 
 ** LOADER **
 ** BOARD: DB-88F6281A-BP LE 

U-Boot 1.1.4 (Jan  8 2010 - 14:03:56) MIC version : 3.4.19-16

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CD4E0

Soc: 88F6281 A1 (DDR2)
CPU running @ 1200Mhz L2 running @ 400Mhz
SysClock = 400Mhz , TClock = 200Mhz 

DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000   size 256MB 
DRAM CS[1] base 0x10000000   size 256MB 
DRAM Total size 512MB  16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
[1024kB@f8000000] Flash:  1 MB

CPU : Marvell Feroceon (Rev 1)

Streaming disabled 
Write allocate disabled


USB 0: host mode
PEX 0: PCI Express Root Complex Interface
PEX interface detected Link X1
Net:   egiga0 [PRIME], egiga1
Hit any key to stop autoboot:  0 
HP>> printenv 
[U-boot variables]
baudrate=115200
loads_echo=0
rootpath=/mnt/ARM_FS/
run_diag=no
console=console=ttyS0,115200 mtdparts=spi_flash:0x80000@0(uboot)ro,0x80000@0x80000(root)
CASset=min
MALLOC_len=1
ethprime=egiga0
bootargs_root=root=/dev/nfs rw
bootargs_end=:::DB88FXX81:eth0:none
image_name=uImage
usb_bootargs=root=/dev/ram rw
bootusb=usb start;fatload usb 0 0x800000 /boot/uImage.usb;fatload usb 0 0x1100000 /boot/uInitrd.usb
usbboot=setenv bootargs $(usb_bootargs); run bootusb; bootm 0x800000 0x1100000
thinpro_bootargs=root=/dev/sda1 rw init=/init video=xgifb splash quiet
thinpro=ide reset; ext2load ide 0:1 0x200000 /boot/uImage; wol; setenv bootargs $(thinpro_bootargs); bootm 0x200000
pcieTune=yes
mfgmode=setenv bootdelay 3; setenv in_mfg yes;setenvh GotoWOL Yes; setenvh WOLEnabled No; setenv bootcmd run mfgboot; saveenv; reset
mfgbootargs=setenv bootargs root=/dev/sdb1 rw init=/init ip=dhcp rootdelay=8 $(console) udevtimeout=8
mfgboot=usb start; ext2load usb 0:1 0x2000000 /boot/uImage; run mfgbootargs; bootm 0x2000000
product=setenv bootdelay 1; setenv in_mfg no;setenvh GotoWOL No; setenvh WOLEnabled Yes; setenv bootcmd run thinpro; saveenv; reset
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;
ethmtu=1500
mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
usb0Mode=host
yuk_ethaddr=00:00:00:EE:51:81
netretry=no
rcvrip=169.254.100.100
loadaddr=0x02000000
autoload=no
ethact=egiga0
gatewayip=10.4.50.5
netmask=255.255.255.0
ipaddr=10.4.50.235
serverip=10.4.50.5
bootdelay=1
in_mfg=no
bootcmd=run thinpro
arcNumber=2846
ethaddr=f4:ce:46:24:38:b3
stdin=serial
stdout=serial
stderr=serial
mainlineLinux=no
enaMonExt=no
enaCpuStream=no
enaWrAllo=no
pexMode=RC
disL2Cache=no
setL2CacheWT=yes
disL2Prefetch=yes
enaICPref=yes
enaDCPref=yes
sata_dma_mode=yes
netbsd_en=no
vxworks_en=no
disaMvPnp=no
enaAutoRecovery=yes

Environment size: 1990/4092 bytes

[PUE variables]
manufacturer=Hewlett-Packard
product_name=hp t5325
vendor=mitac
mac=f4:ce:46:24:38:b3
uuid=f40c252a-bc18-11d4-b355-f4ce462438b3
serial=CN3050012L

Environment size: 146/4092 bytes

[HPE variables]
UbootVersion=0x03041916
UbootReleaseDate=01082010
AssetNumber=0
AssetLocation=0
InitialNumlock=On
ClockSpeed=1200
WOLEnabled=Yes
GotoWOL=No

Environment size: 140/4092 bytes
HP>> dhcp
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 10.42.0.50
HP>> 
Kamal
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 21, 2017 02:42PM
Even though I thought that envs could be set via the U-BOOT prompt after flashing the device with this version of U-BOOT, saving them fails. I guess that's why the steps in the first post of this thread uses /etc/fw_env.config and the binaries (fw_setenv) in the Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2 rootfs.

T5325> setenv bootdelay '3'
T5325> saveenv 
Saving Environment to SPI Flash...
SF: Detected M25P80 with page size 256 Bytes, erase size 64 KiB, total 1 MiB
Erasing SPI flash...offset 0xc0000 is protected and cannot be erased
T5325> reset
resetting ...


U-Boot 2016.05-tld-1 (Jun 12 2016 - 14:06:08 -0700)
HP Thin Client T5325

SoC:   Kirkwood 88F6281_A1
SPI:   ready
DRAM:  512 MiB
WARNING: Caches not enabled
SF: Detected M25P80 with page size 256 Bytes, erase size 64 KiB, total 1 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
PHY reset timed out
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0 
T5325> printenv bootdelay 
bootdelay=10
T5325> 
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 21, 2017 04:45PM
Kamal,

Thanks for the details!

Indeed, it seems different. Let me take sometime to read the logs closely and post back. There might be something you or I have missed.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: HP T5325 Thin Client U-Boot-2016.05-tld-1
September 21, 2017 04:59PM
Kamal,

The first things that caught my attention:

- Your configuration is still default values. These need to be setup to be consistent with your network. You won't get a dynamic IP without setting up the network envs to conform to your network.

ipaddr=192.168.0.231
serverip=192.168.0.220


- To complete the setup for your network configuration, you need to set these envs. Assuming you want to use the default ipaddr and serverip, and your router is 192.168.0.1.

gatewayip=192.168.0.1
netmask=255.255.255.0
ipaddr=192.168.0.231
serverip=192.168.0.220


BTW, these are things to keep in mind:

1. there is no need to use dhcp in u-boot. You should use static IP (defined by ipaddr).
2. serverrip only meaningful when you use NFS, tftp, SNTP. And this is not where you will get the dynamic IP, you'll get it from the router (e.g. 192.168.0.1).

-bodhi
===========================
Forum Wiki
bodhi's corner



Edited 3 time(s). Last edit at 09/21/2017 05:03PM by bodhi.
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: