mrmees
Help with Pogoplug E02 Restore / Repair - Have Serial Access August 21, 2016 08:53AM |
U-Boot 2014.07-tld-2 (Sep 20 2014 - 00:52:18) Pogo E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 No link on egiga0 ping failed; host 192.168.1.1 is not alive Hit any key to stop autoboot: 0 Unknown command 'usb' - try 'help' Unknown command 'mmc' - try 'help' Unknown command 'ide' - try 'help' USB is stopped. Please issue 'usb start' first. Unknown command 'mmc' - try 'help' Unknown command 'ide' - try 'help' (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found ** Bad device usb 0 ** ** Bad device usb 0 ** Wrong Image Format for bootm command ERROR: can't get kernel image! Unknown command 'mmc' - try 'help' Unknown command 'bootargs' - try 'help' ** Bad device mmc 0 ** ** Bad device mmc 0 ** Wrong Image Format for bootm command ERROR: can't get kernel image! Unknown command 'ide' - try 'help' ** Bad device ide 0 ** ** Bad device ide 0 ** Wrong Image Format for bootm command ERROR: can't get kernel image! resetting ...
Re: Help with Pogoplug E02 Restore / Repair - Have Serial Access August 21, 2016 04:52PM |
Admin Registered: 13 years ago Posts: 18,591 |
> U-Boot 2014.07-tld-2 (Sep 20 2014 - 00:52:18) > Pogo E02 > > SoC: Kirkwood 88F6281_A0 > DRAM: 256 MiB > WARNING: Caches not enabled > NAND: 128 MiB > In: serial > Out: serial > Err: serial > Net: egiga0 > No link on egiga0 > ping failed; host 192.168.1.1 is not alive > Hit any key to stop autoboot: 0 > Unknown command 'usb' - try 'help' > Unknown command 'mmc' - try 'help' > Unknown command 'ide' - try 'help' > USB is stopped. Please issue 'usb start' first. > Unknown command 'mmc' - try 'help' > Unknown command 'ide' - try 'help' > (Re)start USB... > USB0: USB EHCI 1.00 > scanning bus 0 for devices... 2 USB Device(s) > found > scanning usb for storage devices... 0 > Storage Device(s) found > ** Bad device usb 0 ** > ** Bad device usb 0 ** > Wrong Image Format for bootm command > ERROR: can't get kernel image! > Unknown command 'mmc' - try 'help' > Unknown command 'bootargs' - try 'help' > ** Bad device mmc 0 ** > ** Bad device mmc 0 ** > Wrong Image Format for bootm command > ERROR: can't get kernel image! > Unknown command 'ide' - try 'help' > ** Bad device ide 0 ** > ** Bad device ide 0 ** > Wrong Image Format for bootm command > ERROR: can't get kernel image! > resetting ... >>
printenv