Oscar
Booting from USB Problems September 28, 2016 07:21AM |
Re: Booting from USB Problems September 28, 2016 10:10AM |
Admin Registered: 13 years ago Posts: 18,591 |
4. Create uImage with embedded DTB for booting with older u-boots (2012 or earlier). Skip this step if you have installed the latest U-Boot for Kirkwood (or are installing this u-boot at the same time).
Please replace kirkwood-goflexnet.dtb below with the correct DTB name for your box (see the folder /media/sdb1/boot/dts).
Generate the uImage with DTB embedded inside:
cd /media/sdb1/boot
cp -a zImage-4.4.0-kirkwood-tld-1 zImage.fdt
cat dts/kirkwood-goflexnet.dtb >> zImage.fdt
mv uImage uImage.orig
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-4.4.0-kirkwood-tld-1 -d zImage.fdt uImage
sync
Oscar
Re: Booting from USB Problems September 28, 2016 11:51AM |
Re: Booting from USB Problems September 28, 2016 05:54PM |
Admin Registered: 13 years ago Posts: 18,591 |