Welcome! Log In Create A New Profile


Oxnas Box bricked?

Posted by dietgert 
Oxnas Box bricked?
July 25, 2017 03:23PM

my STG212-Box became rather hot with 850Mhz SPL-Uboot.
So i tried a "downgrade" to 700Mhz , flashing uboot.spl.2013.10.ox820.mtd0.img.
After a reboot the system shows the following output:

U-Boot SPL 2013.10 (Apr 27 2014 - 19:08:27)
  Boot device: NAND
Attempting to set PLLA to 800 MHz ...
  plla_ctrl0 : 0000030a
  plla_ctrl1 : 00400000
  plla_ctrl2 : 007f0068
  plla_ctrl3 : 00000193


Then nothing happens.

The first question is: has the spl stage finished succesfully - or is this a problem of the SPL stage itself?

Re: Oxnas Box bricked?
July 25, 2017 04:01PM

> U-Boot SPL 2013.10 (Apr 27 2014 - 19:08:27)

Looks like it did finish. The next thing should happen is u-boot starts executing.

If you can't get past this to load u-boot, then it's time to use the internal SATA port to rescue it.

latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner

Your Email:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.