*** ERROR: `ethaddr' not set November 28, 2017 08:17AM |
Registered: 6 years ago Posts: 337 |
fw_setenv ipaddr 192.168.1.23
Re: *** ERROR: `ethaddr' not set November 28, 2017 08:45AM |
Registered: 7 years ago Posts: 310 |
> fw_setenv ipaddr 192.168.1.23 >>
[ 8.663773] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 52:3b:20:9c:11:51in u-boot
setenv ethaddr 52:3b:20:9c:11:51You will need to "saveenv" to keep it and your other values if they are correct.
Re: *** ERROR: `ethaddr' not set November 28, 2017 02:34PM |
Registered: 6 years ago Posts: 337 |
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:21:31 -0700) Seagate GoFlex Home SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 125 *** Unhandled DHCP Option in OFFER/ACK: 125 DHCP client bound to address 192.168.1.54 (32 ms) *** Warning: no boot file name; using 'C0A80136.img' Using egiga0 device TFTP from server 192.168.1.1; our IP address is 192.168.1.54 Filename 'C0A80136.img'. Load address: 0x800000 Loading: T T T T T T T T T T
Re: *** ERROR: `ethaddr' not set November 28, 2017 03:20PM |
Registered: 6 years ago Posts: 337 |
GoFlexHome> load usb 0:1 0x800000 /boot/uImage 3821592 bytes read in 823 ms (4.4 MiB/s) GoFlexHome> load usb 0:1 0x1100000 /boot/uInitrd 7245696 bytes read in 1019 ms (6.8 MiB/s) GoFlexHome> load usb 0:1 0x1c00000 /boot/kirkwood-goflexhome.dtb 10603 bytes read in 739 ms (13.7 KiB/s) GoFlexHome> bootm 0x800000 0x1100000 0x1c00000
Re: *** ERROR: `ethaddr' not set November 28, 2017 03:25PM |
Registered: 6 years ago Posts: 337 |
bootcmd=bootp; setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm